Free radicals trigger chain reaction and inflict damage to the cells and its components, which in turn ultimately interrupts their biological activities. To prevent free radical damage, together with an endogenous antioxidant system, an exogenous supply of antioxidant components to the body in the form of functional food or nutritional diet helps undeniably. Research conducted by the Natl. Inst. of Health claimed that Moringa oleifera Lam possess the highest antioxidant content among various natural food sources based on an oxygen radical absorbent capacity assay. In this study, a 90% (ethanol:distilled water--90:10) gradient solvent was identified as one of the best gradient solvents for the effectual extraction of bioactive components from M. oleifera leaves. This finding was confirmed by various antioxidant assays, including radical scavenging activity (that is, 1, 1-diphenyl-2-picrylhydrazyl, H(2)O(2), and NO radical scavenging assay) and total antioxidant capacity (that is, ferric reducing antioxidant power and molybdenum assay). High-performance liquid chromatography (HPLC) fingerprints of the 90% gradient extract visually showed few specific peaks, which on further analysis, using HPLC-DAD-ESI-MS, were identified as flavonoids and their derivatives. Despite commonly reported flavonoids, that is, kaempferol and quercetin, we report here for the 1st time the presence of multiflorin-B and apigenin in M. oleifera leaves. These findings might help researchers to further scrutinize this high activity exhibiting gradient extract and its bio-active candidates for fruitful clinical/translational investigations.
Food waste and food processing wastes which are abundant in nature and rich in carbon content can be attractive renewable substrates for sustainable biohydrogen production due to wide economic prospects in industries. Many studies utilizing common food wastes such as dining hall or restaurant waste and wastes generated from food processing industries have shown good percentages of hydrogen in gas composition, production yield and rate. The carbon composition in food waste also plays a crucial role in determining high biohydrogen yield. Physicochemical factors such as pre-treatment to seed culture, pH, temperature (mesophilic/thermophilic) and etc. are also important to ensure the dominance of hydrogen-producing bacteria in dark fermentation. This review demonstrates the potential of food waste and food processing waste for biohydrogen production and provides a brief overview of several physicochemical factors that affect biohydrogen production in dark fermentation. The economic viability of biohydrogen production from food waste is also discussed.
Edible bird nests (EBNs) are important ethnomedicinal commodity in the Chinese community. Recently, But and others showed that the white EBNs could turn red by vapors from sodium nitrite (NaNO2) in acidic condition or from bird soil, but this color-changing agent remained elusive. The aim of this study was to determine the prevalence of nitrite and nitrate contents and its affects on EBN's color. EBNs were collected from swiftlet houses or caves in Southeast Asia. White EBNs were exposed to vapor from NaNO2 in 2% HCl, or bird soil. The levels of nitrite (NO2-) and nitrate (NO3-) in EBNs were determined through ion chromatography analysis. Vapors from NaNO2 in 2% HCl or bird soil stained white bird nests to brown/red colors, which correlated with increase nitrite and nitrate levels. Moreover, naturally formed cave-EBNs (darker in color) also contained higher nitrite and nitrate levels compared to white house-EBNs, suggesting a relationship between nitrite and nitrate with EBN's color. Of note, we detected no presence of hemoglobin in red "blood" nest. Using infrared spectra analysis, we demonstrated that red/brown cave-EBNs contained higher intensities of C-N and N-O bonds compared to white house-EBNs. Together, our study suggested that the color of EBNs was associated with the prevalence of the nitrite and nitrate contents.
Sprouts have gained popularity worldwide due to their nutritional values and health benefits. The fact that their consumption has been associated with numerous outbreaks of foodborne illness threatens the $250 million market that this industry has established in the United States. Therefore, sprout manufacturers have utilized the U.S. Food and Drug Administration recommended application of 20,000 ppm of calcium hypochlorite solution to seeds before germination as a preventative method. Concentrations of up to 200 ppm of chlorine wash are also commonly used on sprouts. However, chlorine-based treatment achieves on average only 1- to 3-log reductions in bacteria and is associated with negative health and environmental issues. The search for alternative strategies has been widespread, involving chemical, biological, physical, and hurdle processes that can achieve up to 7-log reductions in bacteria in some cases. The compilation here of the current scientific data related to these techniques is used to compare their efficacy for ensuring the microbial safety of sprouts and their practicality for commercial producers. Of specific importance for alternative seed and sprout treatments is maintaining the industry-accepted germination rate of 95% and the sensorial attributes of the final product. This review provides an evaluation of suggested decontamination technologies for seeds and sprouts before, during, and after germination and concludes that thermal inactivation of seeds and irradiation of sprouts are the most practical stand-alone microbial safety interventions for sprout production.
The objective of this study was to improve product quality of dehydrated fruits (apple, pear, papaya, mango) using combined drying techniques. This involved investigation of bioactivity, colour, and sensory assessment on colour of the dried products as well as the retention of the bio-active ingredients. The attributes of quality were compared in regard to the quality of dehydrated samples obtained from continuous heat pump (HP) drying technique. It was found that for apple, pear and mango the total colour change (ΔE) of samples dried using continuous heat pump (HP) or heat pump vacuum-microwave (HP/VM) methods was lower than of samples dried by other combined methods. However, for papaya, the lowest colour change exhibited by samples dried using hot air-cold air (HHC) method and the highest colour change was found for heat pump (HP) dehydrated samples. Sensory evaluation revealed that dehydrated pear with higher total colour change (ΔE) is more desirable because of its golden yellow appearance. In most cases the highest phenol content was found from fruits dried by HP/VM method. Judging from the quality findings on two important areas namely colour and bioactivity, it was found that combined drying method consisted of HP pre-drying followed by VM finish drying gave the best results for most dehydrated fruits studied in this work as the fruits contain first group of polyphenol compounds, which preferably requires low temperature followed by rapid drying strategy.
Biofilm formation can lead to various consequences in the food processing line such as contamination and equipment breakdowns. Since formation of biofilm can occur in various conditions; this study was carried out using L. monocytogenes ATCC 19112 and its biofilm formation ability tested under various concentrations of sodium chloride and temperatures. Cultures of L. monocytogenes ATCC 19112 were placed in 96-well microtitre plate containing concentration of sodium chloride from 1-10% (w/v) and incubated at different temperature of 4 °C, 30 °C and 45 °C for up to 60 h. Absorbance reading of crystal violet staining showed the density of biofilm formed in the 96-well microtitre plates was significantly higher when incubated in 4 °C. The formation of biofilm also occurs at a faster rate at 4 °C and higher optical density (OD 570 nm) was observed at 45 °C. This shows that storage under formation of biofilm that may lead to a higher contamination along the processing line in the food industry. Formation of biofilm was found to be more dependent on temperature compared to sodium chloride stress.
Introduction: A prebiotic such as inulin is a well-known functional plant food ingredient. It is capable of stimulating growth of beneficial bifidobacteria in the intestine thus protecting against intestinal infections, preventing constipation, increasing mineral absorption, reducing the incidence of colon cancer, and producing B vitamins. Inulin added to food therefore has to be stable during food processing especially against heat treatment, low pH and Maillard reaction. Methods: Newly developed dark chocolate, DC-1, containing inulin (replacing sugar component) as an added value, was stored at 18oC, 60% relative humidity and 25oC, 80% relative humidity (RH) to determine shelf life stability compared to control dark chocolate, DC-0 (with high content of sugar). Sensory evaluation (quantitative descriptive analysis), water activity (aw), microbiological content and presence of inulin after storage of the prebiotic chocolate under both conditions were evaluated to determine shelf life. Results: The DC-1 chocolate had at least 12 months of shelf life at 18oC, 60% RH with better acceptance than DC-0; moreover, it did not experience microbiological and inulin content changes. At 25oC, 80% RH, the growth of Aspergillus sp. was observed on the surface of both DC-0 and DC-1 with aw >0.50 after a 2-month storage. Conclusion: Shelf life stability of DC-1 is almost similar to DC-0.
A study was conducted to determine personal hygiene knowledge among 25 food handlers at 12 selected primary schools in Klang Valley area, Selangor, Malaysia. A qualitative approach using in-depth interviews was employed and respondents were selected by a convenience sampling. The results showed that the respondents had basic knowledge on personal hygiene practices, mainly on hand washing (30.7%) and glove use (18.7%). The food handlers (90%) practiced various good hand washing practices, with only 36% did not practice washing hands after eating or drinking. Most respondents (>70%) practiced glove use, however more than 50% did not wash hands with every glove change, change gloves when change type of products and after preparing raw material. The study showed that the food handlers have basic knowledge one good personal hygiene practices. However, some discrepancies were revealed in the proper hand washing procedure. This study recommended good hand washing procedure to be reiterated among the food handlers. There is also an immediate need for continuous training among food handlers regarding good personal hygiene practices.
Influx of foreign students in Malaysia calls for a study on safety of food in Malaysia restaurants as perceived by them. This study aims to investigate perception of foreign students regarding food safety and personal hygiene practice of food handlers in Malaysia restaurants. A six sections Likert scale questionnaire was used. A total of 350 questionnaires were distributed during this study between March 2011 and March 2012 to the international students from 26 countries of the world in various public and private institutions of higher learning in Klang Valley, Malaysia. Among the distributed questionnaires, only 155 were correctly filled, retrieved and analyzed. Ninety-one respondents (59%) were male while 63 (41%) were females. A total of 107 (69%) were undergraduates and 29 (19%) were postgraduate students. One hundred and thirty-nine (90%) respondents were local or foreign restaurants. Eleven respondents (7%) did not patronize any of the restaurants. Among factors influencing choice of restaurants are closeness to residence, price of food and quality of food were the most important factors 62 (38%). Twenty-seven (28%) eat in restaurants because of the similarity of the food to that of their home country. Of the most preferred food, Nasi ayam, 89 (57%) top the list, next was Nasi goreng ayam, 14 (14%) and African food, 23 (15%). Nasi lemak was the least food preferred 3 (2%). A total of 104 (67%) respondents were of the opinion that handlers kept short nails, 91 (59%) do not pick nose, 108 (55%) stated that food handlers cough or sneeze while handling food. Ninety-eight respondents (64%) also stated that serving of food with unprotected hands were observed. The result of this study showed that although food handlers are aware of the need for personal hygiene, more awareness needs to be created.
A total of 85 food handlers participated in this study to determine the hygienic status of their hands in primary schools located in the state of Selangor (Malaysia). Overall findings revealed that the fecal contamination and personal hygiene of the food handlers were well maintained with the range of mean bacterial counts from 0.18 to 0.47 log10 Colony Forming Units/cm2 during the three intervals of hand swabbing (before, during and after) preparation of ready-to-eat foods. However, the general indication of the microbiological quality (Aerobic Plate Count) was out of the standard (range of mean bacterial counts from 1.39 to 1.56 log10 Colony Forming Units/cm2) based on previous literature. This study highlighted that the food handler’s adherence to Good Manufacturing Practice and Sanitation Standard Operating Procedures was insufficient and suggested that attention should be emphasized on their practices at the intervals of school recess: before, during and after the preparation of ready-to-eat foods. In addition, there is also a need in the implementation of an effective HACCP program in Malaysia school foodservice operations.
Listeria monocytogenes (L. monocytogenes) is a serious food-borne pathogen for immunocompromised individuals. L. monocytogenes is capable of producing biofilm on the surface of food processing lines and instruments. The biofilm transfers contamination to food products and impose risk to public health. Transfers contamination to food products, and impose risk hazard to public health. The aim of this study was to investigate biofilm producing ability of L. monocytogenes isolates. Microtitre assay was used to measure the amount of biofilm production by ten L. monocytogenes isolates from minced chicken / meat, sausages and burgers. Results showed that all 10 L. monocytogenes isolates were able to form biofilm after 24 h at 20˚C on polystyrene surface (the common surface in food industries). Some strains were capable of forming biofilm more than the others. All strains showed a slight raise in the quantities of attached cells over 48 and 72 h. L. monocytogenes strains isolated from minced chicken, minced meat and burgers were better biofilm-producers comparing to the strains isolated from sausages.
The potential of Parthenium sp. as a feedstock for enzymatic saccharification was investigated by using chemical and biological pretreatment methods. Mainly chemical pretreatments (acid and alkali) were compared with biological pretreatment with lignolytic fungi Marasmiellus palmivorus PK-27. Structural and chemical changes as well as crystallinity of cellulose were examined through scanning electron microscopy, fourier transform infra red and X-ray diffraction analysis, respectively after pretreatment. Total reducing sugar released during enzymatic saccharification of pretreated substrates was also evaluated. Among the pretreatment methods, alkali (1% NaOH) treated substrate showed high recovery of acid perceptible polymerised lignin (7.53 ± 0.5 mg/g) and significantly higher amount of reducing sugar (513.1 ± 41.0 mg/gds) compared to uninoculated Parthenium (163.4 ± 21.2) after 48 h of hydrolysis. This is the first report of lignolytic enzyme production from M. palmivorus, prevalent in oil palm plantations in Malaysia and its application in biological delignification of Parthenium sp. Alkali (1% NaOH) treatment proves to be the suitable method of pretreatment for lignin recovery and enhanced yield of reducing sugar which may be used for bioethanol production from Parthenium sp.
The aim of the study was to determine the effect of different types of sugar on the formation of heterocyclic amines (HCA) in marinated grilled chicken. Chicken breast samples were marinated with table sugar, brown sugar, and honey for 24h at 4 °C. The internal temperature, weight loss, free amino acids, sugars, and HCA were determined. The concentrations of all types of HCA (except IQx) in samples that were marinated with table sugar were significantly higher (p<0.006) than brown sugar; whereas those were marinated with honey had the lowest HCA concentrations. A substantial reduction in the concentration of MeIQ, PhIP, DiMeIQx, IQ, IQx, and norharman was achieved in chicken marinated with honey. A correlation study indicated that adding honey into the recipe retarded the formation of most HCA (MeIQ, DiMeIQx, IQ, IQx, norharman, and harman), whereas table sugars enhanced the formation of all HCA except norharman, harman, and AαC.
The roasting of barley and malt products generates colour and flavour, controlled principally by the time course of product temperature and moisture content. Samples were taken throughout the industrial manufacture of three classes of roasted product (roasted barley, crystal malt and black malt) and analysed for moisture content, colour and flavour volatiles. Despite having distinct flavour characteristics, the three products contained many compounds in common. The product concentrations through manufacture of 15 flavour compounds are used to consider the mechanisms (Maillard reaction, caramelisation, pyrolysis) by which they were formed. The use of water sprays resulted in transient increases in formation of certain compounds (e.g., 2-cyclopentene-1,4-dione) and a decrease in others (e.g., pyrrole). The study highlights rapid changes in colour and particularly flavour which occur at the end of roasting and onwards to the cooling floor. This highlights the need for commercial maltsters to ensure consistency of procedures from batch to batch.
The guava processing industry in Malaysia produces by-products in the form of seed core and peel. These by-products can be regarded as underused resources but there are concerns about their composition that prevent their use in the food and feed industries. This study aims to analyze the respective effects of heat treatments (boiling or autoclaving) and germination periods on the nutritional composition and phytochemical content of guava seeds. The guava seeds were found to contain 618, 78, 72, and 5 mg/g dry weight total dietary fiber, fat, protein, and ash, respectively. The tannin and saponin contents, but not the phytic acid content, were below the respective anti-nutritional thresholds. The heat treatments did not affect the total dietary fiber and ash contents but reduced all other chemical components to different extents (15-91%). Boiling did not reduce the phytic acid content substantially but autoclaving caused a reduction of 91% to a level below the anti-nutritional threshold. Germination for 14 days caused a significant reduction in nutrient contents in the range of 16-79%. Germination also reduced the phytic acid content by 90% in the seed but did not significantly affect the saponin content. Thus, guava seed can be treated thermally or germinated to manipulate its chemical composition to enable its use in the food and feed industries.
The influence of dietary lecithin at doses of 0, 4, 20 or 80 g/kg fed to finisher gilts for six weeks prior to slaughter on growth performance, carcass quality and pork quality was investigated. M. longissimus lumborum (loin) was removed from 36 pig carcasses at 24h post-mortem for Warner-Bratzler shear force, compression, collagen content and colour analyses. Dietary lecithin increased dressing percentage (P=0.009). Pork chewiness and collagen content were decreased by dietary lecithin (P<0.05, respectively), suggesting that improved chewiness may be due to decreased collagen content. However, dietary lecithin had no effect on shear force, cohesiveness or hardness (P>0.05, respectively). Dietary lecithin reduced loin muscle L* values and increased a* values (P<0.05, respectively) but no changes on b* values (P=0.56). The data showed that dietary lecithin improved dressing percentage and resulted in less chewy and less pale pork.
Toxic elements such as mercury, arsenic, cadmium, and lead, sometimes called heavy metals, can diminish mental and central nervous system function; elicit damage to blood composition as well as the kidneys, lungs, and liver; and reduce energy levels. Food is considered one of the main routes of their entry into the human body. Numerous studies have been performed to examine the effects of common food processing procedures on the levels of toxic elements in food. While some studies have reported negative effects of processing, several have shown that processing practices may have a positive effect on the reduction of toxic elements in foodstuffs. A number of studies have also introduced protocols and suggested chemical agents that reduce the amount of toxic elements in the final food products. In this review, the reported methods employed for the reduction of toxic elements are discussed with particular emphasis on the chemical binding of both the organic and inorganic forms of each element in various foods. The molecular groups and the ligands by which the food products bind with the metals and the types of these reactions are also presented.
Presence of fat, oil, and grease (FOG) in wastewater is an ever-growing concern to municipalities and solid-waste facility operators. FOG enters the sewer system from restaurants, residences, and industrial food facilities. Its release into the sewer system results in a continuous build-up that causes eventual blockage of sewer pipes. Several researchers have investigated FOG deposition based on the local conditions of sewers and lifestyle. This paper attempts to review the physical and chemical characteristics of FOG, sources of FOG, and potential chemical and biological reactions of FOG. The effect of the aforementioned factors on the FOG-deposition mechanism is also discussed. Moreover, insight into the current control and treatment methods and potential reuse of FOG is highlighted. It is expected that this review would provide scientists and the concerned authorities a holistic view of the recent researches on FOG control, treatment, and reuse.
The main challenge in microfiltration (MF) is membrane fouling, which leads to a significant decline in permeate flux and a change in membrane selectivity over time. This work aims to elucidate the mechanisms of membrane fouling in cold MF of skim milk by identifying and quantifying the proteins and minerals involved in external and internal membrane fouling. Microfiltration was conducted using a 1.4-μm ceramic membrane, at a temperature of 6±1°C, cross-flow velocity of 6m/s, and transmembrane pressure of 159kPa, for 90min. Internal and external foulants were extracted from a ceramic membrane both after a brief contact between the membrane and skim milk, to evaluate instantaneous adsorption of foulants, and after MF. Four foulant streams were collected: weakly attached external foulants, weakly attached internal foulants, strongly attached external foulants, and strongly attached internal foulants. Liquid chromatography coupled with tandem mass spectrometry analysis showed that all major milk proteins were present in all foulant streams. Proteins did appear to be the major cause of membrane fouling. Proteomics analysis of the foulants indicated elevated levels of serum proteins as compared with milk in the foulant fractions collected from the adsorption study. Caseins were preferentially introduced into the fouling layer during MF, when transmembrane pressure was applied, as confirmed both by proteomics and mineral analyses. The knowledge generated in this study advances the understanding of fouling mechanisms in cold MF of skim milk and can be used to identify solutions for minimizing membrane fouling and increasing the efficiency of milk MF.
Spray drying accomplishes drying while particles are suspended in the air and is one method in the family of suspended particle processing systems, along with fluid-bed drying, flash drying, spray granulation, spray agglomeration, spray reaction, spray cooling, and spray absorption. This drying process is unique because it involves both particle formation and drying. The present paper reviews spray drying of fruit extracts, such as acai, acerola pomace, gac, mango, orange, cactus pear, opuntia stricta fruit, watermelon, and durian, and the effects of additives on physicochemical properties such as antioxidant activity, total carotenoid content, lycopene and β-carotene content, hygroscopy, moisture content, volatile retention, stickiness, color, solubility, glass transition temperature, bulk density, rehydration, caking, appearance under electron microscopy, and X-ray powder diffraction. The literature clearly demonstrates that the effect of additives and encapsulation play a vital role in determining the physicochemical properties of fruit extract powder. The technical difficulties in spray drying of fruit extracts can be overcome by modifying the spray dryer design. It also reveals that spray drying is a novel technology for converting fruit extract into powder form.