This study was conducted to determine the Campylobacter contamination rate of chicken carcasses and the processing lines of modern processing plants in Malaysia. Three hundred sixty samples were collected from 24 flocks of broiler chickens at 12 modern poultry processing plants in 6 states of Malaysia. Fresh fecal droppings were collected from crates in the arrival area. Neck skin samples were taken from processed chicken carcasses at 3 different processing stages: before inside-outside washing, after inside-outside washing and post chilling. Swab samples from the scalding tank, chilling tank and conveyer belt before chilling were also collected to determine contamination with Campylobacter in the slaughter house environment prior to slaughter. Isolation for Campylobacter was performed following ISO 10272-1:2006(E). The overall of contamination rate with Campylobacter at the 12 plants was 61.0% (220/360). Eighty point six percent of the samples from before the inside-outside wishing step were contaminated with Campylobacter, as were 62.5% of the samples after the inside washing and 38.9% after the post-chilling step. This study shows extensive contamination of chicken carcasses and slaughtering houses in Malaysia with Campylobacter.
The objective of this study was to examine the effect of washing pre-treatment on mercury concentration in fish fillet. Response surface methodology was used to investigate the influence of three variables, pH (1-6.5), NaCl (0-1% w/v) and exposure time (5-30 min) by using a three-factor central composite design. The aim was to obtain the best possible combination of these variables in order to reduce mercury in fish fillet. The experimental data were adequately fitted into a second-order polynomial model with multiple regression coefficients (R(2)) of 0.961. The results indicated that the reduction of mercury in fish flesh significantly depends on the pH of the solution used. The overall optimal condition resulting in the maximum mercury reduction in fish fillet was obtained at a combined level pH of 2.79, NaCl of 0.5% and exposure time of 13.5 min. The optimized protocol produced a solution that can reduce mercury from raw fish fillet up to 81%.
A total of 360 samples including fresh fecal droppings, neck skins, and swab samples was collected from 24 broiler flocks and processed by 12 modern processing plants in 6 states in Malaysia. Ninety samples from 10 traditional wet markets located in the same states as modern processing plants were also collected. Microbiological isolation for Campylobacter was performed following ISO 10272-1:2006 (E). The overall rate of contamination for Campylobacter in modern processing plants and in traditional wet markets was 61.1% (220/360) and 85.6% (77/90), respectively. Campylobacter jejuni was detected as the majority with approximately 70% for both facilities. In the modern processing plants, the contamination rate for Campylobacter gradually declined from 80.6% before the inside-outside washing to 62.5% after inside-outside washing and to 38.9% after the post chilling step. The contamination rate for Campylobacter from processed chicken neck skin in traditional wet markets (93.3%) was significantly (P<0.01) higher than in modern processing plants (38.9%).
The inclusion of ingredients derived from pigs in highly processed consumer products poses a significant challenge for DNA-targeted analytical enforcement, which could be overcome by using digital PCR. However, most species detection methods use digital PCR to target single-copy nuclear genes, which limits their sensitivity. In this work, we examined the performance of a nanoplate-based digital PCR method that targets multi-copy nuclear (MPRE42) and mitochondrial (Cytb) genes. Poor separation of positive and negative partitions, as well as a 'rain effect' were obtained in the porcine-specific MPRE42 assay. Among the optimization strategies examined, the inclusion of restriction enzymes slightly improved the separation of positive and negative partitions, but a more extensive 'rain effect' was observed. The high copy number of the MPRE42 amplicon is hypothesized to contribute to the saturation of the positive signal. In contrast, the porcine-specific Cytb assay achieved perfect separation of positive and negative partitions with no 'rain effect'. This assay can detect as little as 0.4 pg of pork DNA, with a sensitivity of 0.05% (w/w) in a pork-chicken mixture, proving its applicability for detecting pork in meat and meat-based products. For the MPRE42 assay, potential applications in highly degraded products such as gelatin and lard are anticipated.
Recurrent outbreaks of muscular sarcocystosis among tourists visiting islands in Malaysia have focused international attention on sarcocystosis, a disease once considered rare in humans. Sarcocystis species require two hosts, definitive and intermediate, to complete their life cycle. Humans can serve as definitive hosts, with intestinal sarcocystosis for two species acquired from eating undercooked meat: Sarcocystis hominis, from beef, and Sarcocystis suihominis, from pork. Symptoms such as nausea, stomachache, and diarrhea vary widely depending on the number of cysts ingested but appear more severe with pork than with beef. Humans serve as intermediate hosts for Sarcocystis nesbitti, a species with a reptilian definitive host, and possibly other unidentified species, acquired by ingesting sporocysts from feces-contaminated food or water and the environment; infections have an early phase of development in vascular endothelium, with illness that is difficult to diagnose; clinical signs include fever, headache, and myalgia. Subsequent development of intramuscular cysts is characterized by myositis. Presumptive diagnosis based on travel history to tropical regions, elevated serum enzyme levels, and eosinophilia is confirmed by finding sarcocysts in muscle biopsy specimens. There is no vaccine or confirmed effective antiparasitic drug for muscular sarcocystosis, but anti-inflammatory drugs may reduce symptoms. Prevention strategies are also discussed.
The content of 12 elements in Cambodian dried striped snakehead fish was determined using inductively coupled plasma mass spectrometry. The present study compares the level of the trace toxic metals and nutritional trace elements in the fish processed using solar drying system (SDS) and open sun drying (OSD). The skin of SDS fish has lower level of As, Pb, and Cd compared to the OSD sample. As such, the flesh of the fish accumulated higher amount of toxic metals during OSD compared to SDS. However, arsenic was detected in both samples within the safe limit. The nutritional elements (Fe, Mn, Mg, Se, Mo, Cu, Ni, and Cr) were higher in the skin sample SDS fish compared to OSD fish. These beneficial metals were not accumulated in the flesh sample SDS fish demonstrating lower level compared to drying under conventional system. The reddish coloration of the SDS fish was due to the presence of high Cu content in both the skin and flesh samples which possibly account for no mold formation 5 days after packaging. As conclusion, drying of Cambodian C. striata using solar-assisted system has proven higher content of the nutritious elements compared to using the conventional system despite only slight difference in the toxic metals level between the two systems.
The transformation of an animal into pieces fit for human consumption is a very important operation. Rather than argue about halal slaughter without stunning being inhumane or stunning being controversial from the Islamic point of view, we discuss slaughter, stunning and animal welfare considering both Islamic and animal welfare legislation requirements. With the world Muslim population close to two billion, the provision of halal meat for the Muslim community is important both ethically and economically. However, from the animal welfare standard point of view, a number of issues have been raised about halal slaughter without stunning, particularly, about stressful methods of restraint and the latency of the onset of unconsciousness. This paper sets out to, discuss the methods of stunning that are acceptable by Islamic authorities, highlight the requirements for stunning to be acceptable in Islam and suggest practical ways to improve the humanness of slaughter.
Halal (permissible or lawful) poultry meat production must meet industry, economic, and production needs, and government health requirements without compromising the Islamic religious requirements derived from the Qur'an and the Hadiths (the actions and sayings of the Prophet Muhammad, peace and blessings be upon him). Halal certification authorities may vary in their interpretation of these teachings, which leads to differences in halal slaughter requirements. The current study proposes 6 control points (CP) for halal poultry meat production based on the most commonly used halal production systems. CP 1 describes what is allowed and prohibited, such as blood and animal manure, and feed ingredients for halal poultry meat production. CP 2 describes the requirements for humane handling during lairage. CP 3 describes different methods for immobilizing poultry, when immobilization is used, such as water bath stunning. CP 4 describes the importance of intention, details of the halal slaughter, and the equipment permitted. CP 5 and CP 6 describe the requirements after the neck cut has been made such as the time needed before the carcasses can enter the scalding tank, and the potential for meat adulteration with fecal residues and blood. It is important to note that the proposed halal CP program is presented as a starting point for any individual halal certifying body to improve its practices.
Variations in the definition of poultry meat quality exist because the quality traits are not solely based on intrinsic and extrinsic factors but also consumers' preference. Appearance quality traits (AQT), eating quality traits (EQT), and reliance quality traits (RQT) are the major factors focused by the consumer before buying good quality of poultry meat. AQT and EQT of poultry meat are controlled by physical and biochemical characteristics of muscle fibers which can be categorized into a total number of fibers (TNF), cross-sectional area of fibers (CSAF), and fiber type composition (FTC). In poultry meat, it has been shown that muscle fiber properties play a key role in meat quality because numerous studies have reported the relationships between quality traits and fiber characteristics. Despite intensive research has been carried out to manipulate the muscle fiber to improve poultry meat quality, demand in a rapid growth of poultry muscle has correlated to the deterioration in the meat quality. The present paper reviews the definition of poultry meat quality, meat quality traits, and variations of meat quality. Also, this review presents recent knowledge underlying the relationship between poultry meat quality traits and muscle fiber characteristics.
Cruciferous vegetables belong to the mustard family of plants such as Brussels sprouts, kale, broccoli, cabbage and cauliflower. They are well known for their cancer prevention properties which are due to high content of bioactive compounds, isothiocyanates (ITCs). This study was aimed to investigate nitrosation inhibition ability of the cruciferous vegetables commonly consumed with meat products namely, broccoli, cauliflower and cabbage. Aqueous extracts of fresh and steamed (2 and 4 min) vegetables were subjected to determination of antioxidant capacity (DPPH and FRAP assay) and chemical composition i.e. total phenolic and isothiocyanate (ITC) content. It was found that TPC, DPPH and FRAP values of raw vegetables were different in each vegetable and ranged from 17.12-38.91 mg GAE/100 ml, 44.09-63.31% and 1.36-6.81 mg TE/100 ml, respectively. Among three types of cruciferous vegetable, broccoli had the highest PEITC content being 0.21 mmol/100 g compared to cauliflower (0.15 mmol/100 g) and cabbage (0.06 mmol/100 g). Moreover, it was found that steaming process significantly enhanced antioxidant activity, TPC as well as PEITC content in a timedependent manner up to 4 min (p
The purpose of this study is to compare the tensile strength between additional polystyrene into coconut meat husk reinforced fiber composite. Composite were produced by using hand layup technique. It is seen that with the additional of polystyrene into the coconut meat husk reinforced polyester composites showed the increment tensile strength value compared to the non-added polystyrene which indicates that effective stress transfer between the fiber, matrix and polystyrene.
A study was carried out to determine the process parameters and optimization for the hydrolysis of protein precipitate from cockle (Anadara granosa) meat wash water. Precipitation of the protein in the wash water was done using pH manipulation (pH3-8). The precipitate was hydrolyzed using hydrochloric acid (HCl) and optimized for HCl volume, HCl concentration and hydrolysis time using response surface methodology (RSM) based on a central composite rotatable design. Based on the results, hydrolysis of cockle meat wash water precipitate was carried out by precipitation of the wash water at pH4. Optimum condition for the hydrolysis of 2.0 g of cockle meat wash water precipitate was 25 mL of 1 N HCl for 10 h which resulted in nitrogen content (NC) of 0.7% and degree of hydrolysis (DH) of 55%. NC and DH were significantly influenced only by the hydrolysis time.
As we know, drinking young coconut water and eating the tender meat give many benefit
to the body for its nutritious value rather than its taste; but do we realize that it requires a
dangerous tasks in processing it. The process of trimming requires skills which only can
be obtained by those who run the work daily. Thus, a portable apparatus which has the
capabilities of reducing the hazardous tasks and fasten the time consumed for processing
the young coconut fruit has been proposed and developed. The development of the product
begins with collecting and analyzing the data of 30 young coconut fruits. Then, it is followed
by designing the whole product at main and component level. The conceptual design is
done initially using freehand sketching technique. Next, the 3D solid modeling relies
totally on the CATIA V5R19 software. Finally, a complete details drawing is produced
using CAD software. In this work, the design focuses on the blade slicing and punch bit
head to reduce the hazardous tasks during processing of the young coconut. The blade is
designed to allow the slicing movement to be maneuvered during the husk removal process.
Meanwhile, the puncher has replaced the usage of chopper in creating an opening at the top
of the endocarp. Thus, the device developed will reduce the hazardous task by eliminating
the chopping process and replacing it with the slicing process. Therefore, the tendency to
get caught in accidental injury during the chopping process can be significantly reduced.
This study examined the influence of pH and salt concentration on the protein solubility of slaughtered and non-slaughtered broiler chicken meat. Three types of salt (NaCl, Na2SO4, and (NH4)2SO4), five different pH levels (5.0, 6.0, 7.0, 8.0 and 9.0) and five salt concentrations (0.4, 0.8, 1.2, 1.6, and 2.0 M) were examined. Each type of salt showed distinctive activities for slaughtered and non-slaughtered meat protein solubility. Soluble protein concentration increased as pH increased (p<0.05) from pH5.0 to 8.0 and decreased from pH8.0 to 9.0. It was also observed that protein solubility increased as the salt concentration increased. Protein solubility significantly increased (p<0.05) in the non-slaughtered meat compared to the slaughtered meat at pH8.0 for Na2SO4 at 1.2 M.
Storage temperature and duration plays an important role in meat processing. Observations in poultry processing plants have shown a serious deviation in storage condition compared to the recommended procedures. Furthermore, there is still a paucity of evidence on the effects of storage temperature and duration on meat quality and microbial population. The aim of this study was to determine the effects of different temperature and duration during storage on physico-chemical properties and microbiological quality of broiler chicken Pectoralis major muscle. Eighty birds were slaughtered and processed, following which the packed boneless breast (PBB) (each bird was to provide two breast muscle samples; left breast and right breast) was divided into four groups, each consisted of 40 PBB. Each group was subsequently assigned to storage either at 4 °C, -10 °C, -18 °C or -40 °C, for 24 h before 20 PBB samples from each group were transported to the respective laboratory for meat quality and microbiological analysis. The remaining 20 PBB from each storage temperature were stored for 72 h before being transported for analysis. Results have shown significant increases in drip loss and cooking loss as the storage temperature decreases. Similarly, storage duration significantly affected cooking loss, of which, samples stored for 72 h exhibited higher cooking loss compared to those stored for 24 h. For color, significant differences were only observed in lightness (L*) and redness (a*) values. Longer duration of storage had significantly improved tenderness whereby, samples that have been stored for a shorter duration presented higher pH values. Populations of coliform and Salmonella decreased significantly with decreasing temperature and increasing storage duration.
Forty Droughtmaster bulls were evaluated for breeding soundness, using the method of examination and criteria for classifying bulls of the Society for Theriogenelogy. Eighty three percent of the bulls were classified as satisfactory, 14 percent as questionable and 3 percent as unsatisfactory breeders. Scrotal circumference for 2 to 8-year-old bulls were smaller in questionable and unsatisfactory bulls, as compared to satisfactory bulls. For bulls rated as satisfactory breeders, the scrotal circumference of 37 to 43 cms was higher than for other beef breeds. Three related bulls (2 questionable, 1 satisfactory) carried sperm defects classified as 'knobbed' (38 +/- 3%), 'Dag' (40 +/- 4%) and 'pseudo-droplets' (41 +/- 5%), which may adversely affect fertility.
Ten selected brands of commercial chicken burgers were analysed for their proximate composition, texture profiles, colour and sensory properties. Results show commercial chicken burgers consisted of moisture, proteins, fat and ash in the range of 46.72-69.37%, 11.08-18.77%, 9.08-20.54%, and 1.50-2.96%, respectively. Meanwhile, texture profiles comprised of hardness ranging from 8003.25-19038.15g, while chewiness had the value ranging from 650.78-1275.78 g. On the other hands, cohesiveness had the value ranging from 0.223-0.371, while springiness recorded the value in the range from 0.141-0.443. Colour analysis of cooked burgers resulted in lightness (L*) ranging from 48.21-73.59, redness (a*) from 0.75-9.08, and yellowness (b*) from 21.56-31.24. In sensory evaluation, the most acceptable colour of chicken burger was the one which had the medium lightness (L*) with the value of 63.96), medium redness (a*) with the value of 7.00) and the highest yellowness (b*) intensity value at 31.24. In addition, the most acceptable texture was the one with medium hardness value of 12590 g, high chewiness value of 1195.42 g, high cohesiveness value of 0.371, and medium springiness value of 0.254. It can be concluded that the Malaysian commercial chicken burgers complied with the Food Act of Malaysia and contained different levels of chemical compositions, textural characteristics and colour properties.
This work was investigated the protein solubility properties of meat from chicken in different
body part. The effects of fresh and freezing condition were studied on the protein solubility as
a functional property of slaughter and non slaughtering chicken meat. Solubility of proteins
was significantly reduced for slaughtering fresh meat and in contrast, non slaughtering fresh
meat shows the higher protein solubility. On the other hand, frozen storage meat showed the
difference amount of protein solubility between slaughtering and non slaughtering condition
meat. Freezing condition also showed that the different solubility of different body part meat.
The protein solubility of some parts was significantly increased and some were decreased
between the slaughtering and non slaughtering condition.
Cultured meat is a promising product that is derived through biotechnology that partially circumvents animal physiology, thereby being potentially more sustainable, environmentally friendly and animal friendly than traditional livestock meat. Such a novel technology that can impact many consumers evokes ethical, philosophical and religious discussions. For the Islamic community, the crucial question is whether cultured meat is halal, meaning compliant with Islamic laws. Since the culturing of meat is a new discovery, invention and innovation by scientists that has never been discussed by classical jurists (fuqaha'), an ijtihad by contemporary jurists must look for and provide answers for every technology introduced, whether it comply the requirements of Islamic law or not. So, this article will discuss an Islamic perspective on cultured meat based on the original scripture in the Qur'an and interpretations by authoritative Islamic jurists. The halal status of cultured meat can be resolve through identifying the source cell and culture medium used in culturing the meat. The halal cultured meat can be obtained if the stem cell is extracted from a (Halal) slaughtered animal, and no blood or serum is used in the process. The impact of this innovation will give positive results in the environmental and sustain the livestock industry.