Pulmonary hydatid cyst (PHC) in pregnancy is a very rare pathology. We report here a case of ruptured PHC during pregnancy in a 26-year old Syrian (refugee) woman who presented with complaints of productive cough with metallic taste and dyspnoea. PHC was suspected due to her clinical and radiological findings. Interestingly, the sputum examination confirmed the diagnosis as numerous protoscoleces were present. Serology for Echinococcus infection revealed positive at high titre. Early diagnosis and prompt treatment by providing care improves the patient outcome. Parasitological examination of the respiratory specimen in suspected ruptured PHC is desirable as a valuable detection tool.
At present, a limited amount of information exists on the association between cognitive reserve and cognitive impairment in stroke populations. To determine predictors of cognitive reserve among stroke patients, 80 stroke patients attending the neurological and rehabilitation clinic in two different Malaysian general hospitals participated in this study. The Malay Cognitive Reserve Index questionnaire (CRIq-M), Depression Anxiety and Stress Scales-Short Form (DASS-21), WHO Quality of Life assessment BREF-21 (WHO-QOL BREF-21), Montreal Cognitive Assessment (MoCA), and modified Rankin Scale (mRS) were used as instruments in this study. The study found that cognitive reserve (CRIq-M) is positively correlated with cognitive function (MoCA), r = 0.529, p
Nitric oxide (NO) is involved in many pathophysiological processes in the brain. NO is synthesized from arginine by nitric oxide synthase (NOS) enzymes. Citrulline formed as a by-product of the NOS reaction, can be recycled to arginine by successive actions of argininosuccinate synthetase (ASS) and argininosuccinate lyase (ASL) via the citrulline-NO cycle. Hyperammonemia is known to cause poorly understood perturbations of the citrulline-NO cycle. To understand the role of citrulline-NO cycle in hyperammonemia, NOS, ASS, ASL and arginase activities, as well as nitrate/nitrite (NOx), arginine, ornithine, citrulline, glutamine, glutamate and GABA were estimated in cerebral cortex (CC), cerebellum (CB) and brain stem (BS) of rats subjected to acute ammonia toxicity. NOx concentration and NOS activity were found to increase in all the regions of brain in acute ammonia toxicity. The activities of ASS and ASL showed an increasing trend whereas the arginase was not changed. The results of this study clearly demonstrated the increased formation of NO, suggesting the involvement of NO in the pathophysiology of acute ammonia toxicity. The increased activities of ASS and ASL suggest the increased and effective recycling of citrulline to arginine in acute ammonia toxicity, making NO production more effective and contributing to its toxic effects.
Hyaluronatelyase produced by various microorganisms are capable of degrading hyaluronic acid in connective tissues and initiating the spread of infection by opening an access for the pathogen into host tissues. The present study attempts to determine the distribution of hyaluronatelyase-producing Streptococcus pneumoniae among invasive, non invasive and carriage isolates, and correlate it with the clinical sources, year of isolation, colonial morphology and their serotypes. A total of 100 isolates from various clinical samples were selected and screened for hyaluronatelyase production and presence of the encoding SpnHyl gene. All isolates possessed SpnHyl gene. Ninety-six isolates including 34 carriage isolates were positive for production of hyaluronatelyase. Four hyaluronatelyase-negative isolates were from blood (2 isolates) and sputum (2 isolates). No significant association was detected among hyaluronatelyase production and bacterial characteristics except for colonial morphology (p = 0.040). High percentages of hyaluronatelyase production in these isolates suggest their possible role as human pathogens.
Ischemic stroke is due to either local thrombus formation or emboli that occlude a cerebral artery, together with chronic kidney disease represent major mortality and morbidity.Here we present a case of 53 years old Malay man, admitted to a hospital in Malaysia complaining of sudden on set of weakness on right sided upper and lower limb associated with slurred speech. Patient was also suffering from uncontrolled hypertension, hyperlipidemia, chronic kidney disease stage 4, and diabetes mellitus (uncontrolled). He was diagnosed with acute ischemic stroke with cranial nerve 7 palsy (with right hemiparesis), acute on chronic kidney disease precipitated by dehydration and ACE inhibitor, and hyperkalemia. Patients with ischemic disease and chronic kidney disaese require constant monitering and careful selected pharmacotherapy. Patient was placed under observation and was prescribed multiple pharamacotherpay to stabalise detoriating condition.
Although primary localised tumours of renal cell carcinoma (RCC) can be treated relatively successfully with surgery, metastatic RCC has poor prognosis because of late diagnosis and resistance to therapies. In the present study, we were interested in profiling the protein expression of "inhibitor of caspase-activated DNase" (ICAD), an apoptosis inhibitor, in kidney cancer and its paired normal kidney. Immunohistochemistry with automated batch staining and morphometry using digital pathology were used to compare ICAD in 121 RCC specimens with their paired normal kidney tissue. Tissue microarray of formalin-fixed, paraffin-embedded archival tissue was used. Intensity and localisation of ICAD were compared between normal and cancer samples, and against grading within the cancers. The results demonstrated that, in this cohort, ICAD was highly expressed in the proximal tubular epithelium of normal kidney, and significantly decreased in clear cell RCC tissue (p < 0.05) as well as other subtypes of RCC (p < 0.01) compared with normal kidney. There was a tendency towards nuclear localisation of ICAD in clear cell RCC, but not in other subtypes of RCC. No significant association was found between ICAD intensity and grade of RCC. In summary, down-regulation of ICAD occurs in RCC. ICAD normally inhibits DNA fragmentation and apoptosis; thus, its down-regulation was unexpected in a cancer known for its resistance to apoptosis. However, these RCC samples were from primary, not metastatic, RCC sites, and down-regulated ICAD may be part of a progressive pathway that promotes RCC metastasis.
In this work, the effect of solvent pre-treatment (hexane, petroleum ether and ethanol) on the physicochemical, thermal and morphology behavior of Mangifera pajang seed fat (MPSF) were investigated. Fat extraction was performed using Soxhlet method, and results showed that the yield, physicochemical, and crystalline structures of the MPSF were significantly (p < 0.05) influenced by the extraction solvents. Hexane gave the highest fat yield (7.67 %) with low unsaturation value (52.13 g iodine/g) compared with petroleum ether and ethanol. Hexane MPSF also had low oxidation rate (peroxide value of 1.1 mEq/g). Both non-stabilized and stabilized hexane MPSF showed a single melting endothermic peak at high temperature with onset, maximum peak and offset temperature of 16.23 ˚C-18.21 °C, 28.22 ˚C-31.25 °C and 34.85 ˚C-39.58 °C, respectively. Hexane MPSF crystallized rapidly at high temperature with single maximum peak starting at 16.51 ˚C-16.68 °C and ending at 0.23 ˚C-1.13 °C. In comparison with ethanol extract, hexane MPSF demonstrated a compact crystalline structure with a large densely packed center. Therefore, MPSF obtained from hexane presented better overall quality than those obtained from other extraction solvents. MPSF exhibited similar melting and morphological behavior to mango kernel fat and commercial cocoa butter. These results suggested that hexane was the best solvent for the extraction of MPSF. This fat also has the potential to be applied as a cocoa butter alternative fat or functional fat.
Two hundred eleven patients with small- to moderate-sized native patent ductus arteriosus underwent closure using Gianturco coils, employing the transvenous multiple catheter approach. Short-term results showed a high rate of complete occlusion and a potential long-term complication of mild left pulmonary artery stenosis in a small number of patients.
Medial coronoid disease (MCD) encompasses lesions of the entire medial coronoid process (MCP), both of the articular cartilage and the subchondral bone. To detect the earliest signs of MCD, radiography and computed tomography were used to monitor the development of MCD in 14 Labrador retrievers, from 6 to 7 weeks of age until euthanasia. The definitive diagnosis of MCD was based on necropsy and micro-computed tomography findings. The frequency of MCD in the dogs studied was 50%. Radiographic findings did not provide evidence of MCD, ulnar subtrochlear sclerosis or blunting of the cranial edge of the MCP. Computed tomography was more sensitive (30.8%) than radiography (0%) in detecting early MCD, with the earliest signs detectable at 14 weeks of age. A combination of the necropsy and micro-computed tomography findings of the MCP showed that MCD was manifested as a lesion of only the subchondral bone in dogs <18 weeks of age. In all dogs (affected and unaffected), there was close contact between the base of the MCP and the proximal radial head in the congruent joints. Computed tomography and micro-computed tomography findings indicated that the lesions of MCD probably originated at the base of the MCP.
186 Re (T1/2= 89.24 h, [Formula: see text] 346.7 keV, [Formula: see text] ), an intense beta-emitter shows great potential to be used as an active material in therapeutic radiopharmaceuticals due to its suitable physico-chemical properties.186Re can be produced in several ways, however charged-particle induced reactions show to be promising towards no carrier added production. In this work, production cross-sections of186Re were evaluated following the light-charged particle induced reactions on tungsten. An effective evaluation technique such as Simultaneous Evaluation on KALMAN code combined with least squares concept was used to obtain the evaluated data together with covariances. Knowledge of the underlying uncertainties in evaluated nuclear data, i.e., covariances are useful to improve the accuracy of nuclear data.
Bell's palsy is a benign lower motor neuron facial nerve disorder. It is almost always unilateral. We report a 20-year-old nulliparous woman with five episodes of recurrent Bell's palsy. A review of recent medical literature revealed a paucity of case reports involving an individual with five episodes of recurrent Bell's palsy, with none found in Asian neurology medical literature. Despite the multiple episodes of Bell's palsy recurrences, the patient did not suffer much neurological sequelae from the disease.
Solar cells are considered one of the most important and widespread solar applications in the world. However, the performance of the PV modules is significantly affected by the dust in the air. This paper, therefore, presents a comparison of an outdoor experimental study of dust effect on monocrystalline, and polycrystalline photovoltaic (PV) modules. For analysis, four 100 W PVs were installed horizontally in Sohar, Oman. For each pair of PV modules, one was left dusty due to environmental impact, and the second was cleaned daily. PV performance and environmental parameter measurements were conducted every 30 min for 35 days. The effects of dust on current, voltage, power, and energy were discussed in terms of time and normalized values. Also, cleaning methods were tested to determine the optimum one. It is found that power degradation of monocrystalline (20%) is higher compared with polycrystalline (12%) due to dust accumulation. For monocrystalline, the current, voltage, and power losses ranged between 10.0-24.0%, 2.0-3.5%, and 14.0-31.0%, respectively. However, for polycrystalline, the degradation rates were 16.88-27.92%, 0.455-0.455%, and 17.14-28.1% for current, voltage, and power losses after exposure to outdoor conditions for the same period, respectively. The dust accumulation on the PV surface found after 5 weeks is 0.493 mg/cm2, which can be considered the lowest accumulation rate compared to other Gulf countries, but which, however, leads to less energy degradation as well. It is found that water is sufficient to clean PV in the study area. However, sodium detergent as a cleaner introduced better results compared to water, especially when there is high pollution in the location.
The bi-fluid photovoltaic thermal (PVT) collector was introduced to provide more heating options along with improved cooling capabilities for the PV module. Since its introduction, this type of PVT system has been investigated thoroughly in various original works. In this review paper, we intend to put the concept and applications of this technology into question and revise the main achievements and discoveries through research and development with a focus on climatic and operational parameters. The paper encompasses a critical review of the discussed research and future directions for PVT collectors. The main utilized operational modes are discussed in detail, which are (i) water used in both channels, (ii) water in one channel and air in the other, and (iii) air in both channels. The modes were found to lead to different enhancement and performance effects for the utilized photovoltaic modules. The impact of mass flow rate was also taken by keeping one working fluid constant while varying the other to obtain its impact on the energy and exergy efficiency of the collector. In some cases, the fluids were run simultaneously and, in other cases, independently.
Chikungunya virus (CHIKV) infection is the cause of acute symptoms and chronic symmetrical polyarthritis associated with long-term morbidity and mortality. Currently, there is no available licensed vaccine or particularly useful drug for human use against CHIKV infection. This study was conducted to evaluate the efficacy of antibodies produced by papaya mosaic virus (PapMV) nanoparticles fused to E2EP3 peptide of CHIKV envelope as a recombinant CHIKV vaccine. PapMV, PapMV-C- E2EP3, and E2EP3-N-PapMV were produced in E. coli with an approximate size of 27 to 30 kDa. ICR mice (5 to 6 weeks of age) were injected subcutaneously with 25 micrograms of vaccine construct, and ELISA measured the titer of CHIKV specific IgG antibodies. The results showed that both recombinant proteins E2EP3-N-PapMV and PapMVC-E2EP3 were able to induce IgG antibodies production in immunized mice against CHIKV while immunization with recombinant PapMV showed no IgG antibodies induction. The neutralizing activity of the antibodies generated by either E2EP3-N-PapMV or PapMV-C-E2EP3 exhibited similar inhibition to CHIKV replication in Vero cells using the cells based antibody neutralizing assay and analyzed by plaque formation assay. This study showed the effectiveness of nanoparticles vaccine generated by fusing epitope peptide of CHIKV envelope to papaya mosaic virus envelope in inducing a robust immune response in mice against CHIKV. The data showed that levels of neutralizing antibodies correlate with a protective immune response CHIKV replication.
The inherent biological hazards associated with ionizing radiation necessitate the implementation of effective shielding measures, particularly in medical applications. Interventional radiology, in particular, poses a unique challenge as it often exposes medical personnel to prolonged periods of high x-ray doses. Historically, lead and lead-based compounds have been the primary materials employed for shielding against photons. However, the drawbacks of lead, including its substantial weight causing personnel's inflexibility and its toxicity, have raised concerns regarding its long-term impact on both human health and the environment. Barium tantalate has emerged as a promising alternative, due to its unique attenuation properties against low-energy x-rays, specifically targeting the weak absorption area of lead. In the present study, we employ the Geant4 Monte Carlo simulation tool to investigate various formulations of barium tantalate doped with rare earth elements. The aim is to identify the optimal composition for shielding x-rays in the context of interventional radiology. To achieve this, we employ a reference x-ray spectrum typical of interventional radiology procedures, with energies extending up to 90 keV, within a carefully designed simulation setup. Our primary performance indicator is the reduction in air kerma transmission. Furthermore, we assess the absorbed doses to critical organs at risk within a standard human body phantom protected by the shield. Our results demonstrate that specific concentrations of the examined rare earth impurities can enhance the shielding performance of barium tantalate. To mitigate x-ray exposure in interventional radiology, our analysis reveals that the most effective shielding performance is achieved when using barium tantalate compositions containing 15% Erbium or 10% Samarium by weight. These findings suggest the possibility of developing lead-free shielding solutions or apron for interventional radiology personnel, offering a remarkable reduction in weight (exceeding 30%) while maintaining shielding performance at levels comparable to traditional lead-based materials.
We have noticed one ambiguity and two minor errors in our original published paper [1], which we modify in this corrigendum. However, the errors do not affect the results and discussion of the original paper.
A dissipative quantum dot (QD)-cavity system, where the QD is initially prepared in the excited state with no photon in the cavity, coupled to a longitudinal acoustic (LA) phonon reservoir is studied using a numerically exact real-time path-integral approach. Three distinct dynamical regimes of weak (WC), strong (SC), and coherent coupling (CC) are discussed and more accurate conditions identifying them are presented. Our results show that to have the CC regime, which is characterized by clear vacuum Rabi oscillation (VRO), vacuum Rabi splitting (VRS) should be larger than the sum of the widths of the corresponding peaks. In order to distinguish between contributions of population decay and impure dephasing, induced by LA phonon bath and the dissipations, we propose a two-part phenomenological expression, corresponding to the population decay and impure dephasing, which fits the QD-cavity decay curves perfectly and is used to calculate the corresponding spectra. We demonstrate that the effective population decay rate (the emission rate) increases from the carrier recombination rate to a maximum value, which is the mean of the QD and cavity dissipation rates, with QD-cavity coupling strength. To study the role of the effective impure dephasing rate on the width of the central peak of the spectra we introduce a quantity that can also be applied in determining the distinct coupling regimes. This quantity enables us to identify the onset of the SC regime as the point where the impure dephasing term begins to contribute to the central band of the spectrum significantly, as a result of the existence of VRO with a very small frequency (unclear VRO) at the corresponding decay curve. Its contribution to the width of the central peak increases with the coupling strength up to the onset of the CC regime, then reduces as a result of the appearance of sidebands in the spectra, which originates from clear VRO. The effective population decay and impure dephasing rate contribute solely to the width-of the central and sideband peaks of the triplet spectra respectively-only beyond a very large coupling strength which is the same across the considered temperature range. For higher temperatures, the maximum achievable emission rate can be obtained at larger coupling strengths.
Additive manufacturing has attracted increasing attention worldwide, especially in the healthcare, biomedical, aerospace, and construction industries. In Malaysia, insufficient acceptance of this technology by local industries has resulted in a call for government and local practitioners to promulgate the development of this technology for various industries, particularly for biomedical products. The current study intends to frame the challenges endured by biomedical industries who use 3D printing technology for their manufacturing processes. Qualitative methods, particularly in-depth interviews, were used to identify the challenges faced by manufacturing firms when producing 3D printed biomedical products. This work was able to identify twelve key challenges when deploying additive manufacturing in biomedical products and these include issues related to binder selection, poor mechanical properties, low-dimensional accuracy, high levels of powder agglomeration, nozzle size, distribution size, limited choice of materials, texture and colour, lifespan of materials, customization of fit and design, layer height, and, lastly, build-failure. Furthermore, there also are six challenges in the management of manufacturing biomedical products using 3D printing technology, and these include staff re-education, product pricing, limited guidelines, cyber-security issues, marketing, and patents and copyright. This study discusses the reality faced by 3D printing players when producing biomedical products in Malaysia, and presents a primary reference for practitioners in other developing countries.
Synovial haemangiomas are rare benign vascular proliferations arising in synovium-lined surfaces. While the knee is by far the joint most commonly involved, this condition can also occur in the elbow. We report an eight-year-old boy who presented to the National University of Malaysia Medical Centre, Kuala Lumpur, Malaysia, in 2016 with a left elbow swelling of one year's duration. Magnetic resonance imaging showed a lobulated intra-articular mass with intermediate signal intensity on T1-weighted imaging and low signal punctate and linear structures within the hyperintense mass on T2-weighted imaging. In addition, there was heterogeneous yet avid contrast enhancement on post-gadolinium contrast images. The mass had juxta-articular extension and bony erosion to the coronoid process and the head of the radius. Synovial haemangiomas present a diagnostic dilemma. This report highlights certain imaging characteristics to distinguish this entity from other differential diagnoses.