MyMedR

Displaying publications 121 - 140 of 168 in total

Abstract:

Sort:

Design and development of dry powder sulfobutylether-β-cyclodextrin complex for pulmonary delivery of fisetin

Mohtar N, Taylor KM, Sheikh K, Somavarapu S

Eur J Pharm Biopharm, 2017 Apr;113:1-10.
PMID: 27916704 DOI: 10.1016/j.ejpb.2016.11.036

This study has investigated complexation of fisetin, a natural flavonoid, with three types of cyclodextrins to improve its solubility. Sulfobutylether-β-cyclodextrin (SBE-β-CD) showed the highest complexation efficiency while maintaining the in vitro antioxidant activity of fisetin. Addition of 20%v/v ethanol in water improved the amount of solubilized fisetin in the complex 5.9-fold compared to the system containing water alone. Spray drying of fisetin-SBE-β-CD complex solution in the presence of ethanol produced a dry powder with improved aerosolization properties when delivered from a dry powder inhaler, indicated by a 2-fold increase in the fine particle fraction (FPF) compared to the powder produced from the complex solution containing water alone. The pitted morphological surface of these particles suggested a more hollow internal structure, indicating a lighter and less dense powder. Incorporation of 20%w/w leucine improved the particle size distribution of the powder and further increased the FPF by 2.3-fold. This formulation also showed an EC50 value equivalent to fisetin alone in the A549 cell line. In conclusion, an inhalable dry powder containing fisetin-SBE-β-CD complex was successfully engineered with an improved aqueous solubility of fisetin. The dry powder may be useful to deliver high amounts of fisetin to the deep lung region for therapeutic purposes.

Matched MeSH terms: Chemistry, Pharmaceutical
Hybrid membrane filtration-advanced oxidation processes for removal of pharmaceutical residue

Rosman N, Salleh WNW, Mohamed MA, Jaafar J, Ismail AF, Harun Z

J Colloid Interface Sci, 2018 Dec 15;532:236-260.
PMID: 30092507 DOI: 10.1016/j.jcis.2018.07.118

Reports of pharmaceuticals exist in surface water and drinking water around the world, indicate they are ineffectively remove from water and wastewater using conventional treatment technologies. The potential of adverse effect of these pharmaceuticals on public health and aquatic life, also their continuos accumulation have raised the development of water treatment technologies. Hybrid treatment processes like membrane filtration and advance oxidation processes (AOPs) are likely to give rise to efficient simultaneous degradation and separation mechanisms. Conventional membrane filtration techniques can remove the majority of contaminants, but the smallest, undegraded, and stabilized pharmaceutical wastes persist in the treated water. After some 20 years, researchers have recognized the important role of AOPs in the treatment of pharmaceutical wastewater because these technologies are capable of oxidizing recalcitrant, toxic, and non-biodigradable compounds into numerous by-products and finally, inert end-products via the intermediacy of hydroxyl and other radicals. Evidently, membranes are subjected to the fouling phenomenon by the contaminants in wastewater, hence resulting in a reduction of clean water flux and increase in energy demand. In such situations, these membrane hybrid AOPs exert a complementary effect in the elimination of membrane fouling, thus enhancing the performance of the membrane. Therefore, in this review, we describe the basic aspects of the removal and transformation of certain pharmaceuticals via membranes and AOPs. In addition, information and evidences on membrane hybrid AOPs in the field of pharmaceutical wastewater treatment is also presented.

Matched MeSH terms: Chemistry, Pharmaceutical
Fulltext Synthesis, biological evaluation and corrosion inhibition studies of transition metal complexes of Schiff base

Kashyap S, Kumar S, Ramasamy K, Lim SM, Shah SAA, Om H, et al.

Chem Cent J, 2018 Nov 20;12(1):117.
PMID: 30460466 DOI: 10.1186/s13065-018-0487-1

BACKGROUND: The transition metal complexes formed from Schiff base is regarded as leading molecules in medicinal chemistry. Because of the preparative availability and diversity in the structure of central group, the transition metals are important in coordination chemistry. In the present work, we have designed and prepared Schiff base and its metal complexes (MC1-MC4) and screened them for antimicrobial, anticancer and corrosion inhibitory properties.
METHODOLOGY: The synthesized metal complexes were characterized by physicochemical and spectral investigation (UV, IR, 1H and 13C-NMR) and were further evaluated for their antimicrobial (tube dilution) and anticancer (SRB assay) activities. In addition, the corrosion inhibition potential was determined by electrochemical impedance spectroscopy (EIS) technique.
RESULTS AND DISCUSSION: Antimicrobial screening results found complexes (MC1-MC4) to exhibit less antibacterial activity against the tested bacterial species compared to ofloxacin while the complex MC1 exhibited greater antifungal activity than the fluconazole. The anticancer activity results found the synthesized Schiff base and its metal complexes to elicit poor cytotoxic activity than the standard drug (5-fluorouracil) against HCT116 cancer cell line. Metal complex MC2 showed more corrosion inhibition efficiency with high Rct values and low Cdl values.
CONCLUSION: From the results, we can conclude that complexes MC1 and MC2 may be used as potent antimicrobial and anticorrosion agents, respectively.

Matched MeSH terms: Chemistry, Pharmaceutical
Newly formulated 5% 5-aminolevulinic acid photodynamic therapy on Candida albicans

Greco G, Di Piazza S, Chan J, Zotti M, Hanna R, Gheno E, et al.

Photodiagnosis Photodyn Ther, 2020 Mar;29:101575.
PMID: 31614222 DOI: 10.1016/j.pdpdt.2019.10.010

BACKGROUND: A large number of systemic diseases can be linked to oral candida pathogenicity. The global trend of invasive candidiasis has increased progressively and is often accentuated by increasing Candida albicans resistance to the most common antifungal medications. Photodynamic therapy (PDT) is a promising therapeutic approach for oral microbial infections. A new formulation of 5-aminolevulinic acid (5%ALA) in a thermosetting gel (t) (5%ALA-PTt) was patented and recently has become available on the market. However, its antimicrobial properties, whether mediated or not by PDT, are not yet known. In this work we characterised them.
METHODS: We isolated a strain of C. albicans from plaques on the oral mucus membrane of an infected patient. Colonies of this strain were exposed for 1 24 h, to 5%ALA-PTt, 5%ALA-PTt buffered to pH 6.5 (the pH of the oral mucosa) (5%ALA-PTtb) or not exposed (control). The 1 h-exposed samples were also irradiated at a wavelength of 630 nm with 0.14 watts (W) and 0.37 W/cm2 for 7 min at a distance of <1 mm.
RESULTS AND CONCLUSION: The 5% ALA-PTt preparation was shown to be effective in reducing the growth of biofilm and inoculum of C. albicans. This effect seems to be linked to the intrinsic characteristics of 5%ALA-TPt, such acidic pH and the induction of free radical production. This outcome was significantly enhanced by the effect of PDT at relatively short incubation and irradiation times, which resulted in growth inhibition of both treated biofilm and inoculum by ∼80% and ∼95%, respectively.

Matched MeSH terms: Chemistry, Pharmaceutical
Effects of microwave on drug release property of poly(methyl vinyl ether-co-maleic acid) matrix

Wong TW, Wahab S, Anthony Y

Drug Dev Ind Pharm, 2007 Jul;33(7):737-46.
PMID: 17654022

The drug release behavior of beads made of poly(methyl vinyl ether-co-maleic acid) was investigated with respect to the influence of microwave irradiation. The beads were prepared by an extrusion method with sodium diclofenac as a model water-soluble drug. The beads were subjected to microwave irradiation at 80 W for 5 and 20 min, and at 300 W for 1 min 20 s and 5 min 20 s. The profiles of drug dissolution, drug content, drug-polymer interaction, and polymer-polymer interaction were determined by using dissolution testing, drug content assay, differential scanning calorimetry, and Fourier transform infra-red spectroscopy. Keeping the level of supplied irradiation energy identical, treatment of beads by microwave at varying intensities of irradiation did not bring about similar drug release profiles. The extent and rate of drug released from beads were markedly enhanced through treating the samples by microwave at 80 W as a result of loss of polymer-polymer interaction via the (CH(2))(n) moiety, but decreased upon treating the beads by microwave at 300 W following polymer-polymer interaction via the O-H, COOH, and COO(-) moieties as well as drug-polymer interaction via the N-H, O-H, COO(-), and C-O moieties. The beads treated by microwave at 300 W exhibited a higher level of drug release retardation capacity than those that were treated by microwave at 80 W in spite of polymer-polymer interaction via the (CH(2))(n) moiety was similarly reduced in the matrix. The mechanism of drug release of both microwave-treated and untreated beads tended to follow zero order kinetics. The drug release was markedly governed by the state of polymer relaxation of the matrix and was in turn affected by the state of polymer-polymer and/or drug-polymer interaction in beads.

Matched MeSH terms: Chemistry, Pharmaceutical
Comparison studies on the percolation thresholds of binary mixture tablets containing excipients of plastic/brittle and plastic/plastic deformation properties

Amin MC, Fell JT

Drug Dev Ind Pharm, 2004;30(9):937-45.
PMID: 15554218

Percolation theory has been used with great interest in understanding the design and characterization of dosage forms. In this study, work has been carried out to investigate the behavior of binary mixture tablets containing excipients of similar and different deformation properties. The binary mixture tablets were prepared by direct compression using lactose, polyvinyl chloride (PVC), Eudragit RS 100, and microcrystalline cellulose (MCC). The application of percolation theory on the relationships between compactibility, Pmax, or compression susceptibility (compressibility), gamma, and mixture compositions reveals the presence of percolation thresholds even for mixtures of similar deformation properties. The results showed that all mixture compositions exhibited at least one discreet change in the slope, which was referred to as the percolation threshold. The PVC/Eudragit RS100 mixture compositions showed significant percolation threshold at 80% (w/w) PVC loading. Two percolation thresholds were observed from a series of binary mixtures containing similar plastic deformation materials (PVC/MCC). The percolation thresholds were determined at 20% (w/w) and 80% (w/w) PVC loading. These are areas where one of the components percolates throughout the system and the properties of the tablets are expected to experience a sudden change. Experimental results, however, showed that total disruption of the tablet physical properties at the specified percolation thresholds can be observed for PVC/lactose mixtures at 20-30% (w/w) loading while only minor changes in the tablets' strength for PVC/MCC or PVC/Eudragit RS 100 mixtures were observed.

Matched MeSH terms: Chemistry, Pharmaceutical
In vitro and in vivo evaluation of self-microemulsifying drug delivery system of buparvaquone

Venkatesh G, Majid MI, Mansor SM, Nair NK, Croft SL, Navaratnam V

Drug Dev Ind Pharm, 2010 Jun;36(6):735-45.
PMID: 20136493 DOI: 10.3109/03639040903460446

The aim of this study was to prepare a lipid-based self-microemulsifying drug delivery system (SMEDDS) to increase the solubility and oral bioavailability of a poorly water-soluble compound, buparvaquone (BPQ).

Matched MeSH terms: Chemistry, Pharmaceutical
Relating in vitro/in vivo data of two controlled-release metformin formulations

Yuen KH, Peh KK, Tan BL

Drug Dev Ind Pharm, 1999 May;25(5):613-8.
PMID: 10219530

This study was conducted to compare the bioavailability of two controlled-release metformin preparations (Diabetmin Retard and Glucophage Retard) and also to correlate the in vitro and in vivo data obtained with the two preparations. Twelve healthy volunteers participated in the study, conducted according to a completely randomized, two-way crossover design. The preparations were compared using area under the plasma concentration-time curve AUC0-infinity, time to reach peak plasma concentration Tmax, and peak plasma concentration Cmax, while correlation was determined between in vitro release and in vivo absorption. Diabetmin Retard demonstrated a slower rate of in vitro release, but a faster rate of in vivo absorption than Glucophage Retard. However, the in vivo absorption of both products was found to be slower than that of drug released in vitro. A satisfactory relationship could be established between the in vitro and in vivo results, but there was no rank order correlation. No statistically significant difference was observed between the two preparations in the parameters AUC0-infinity and Cmax. However, a slight but statistically significant difference was observed between the Tmax values, but it may not be therapeutically significant. Moreover, the 90% confidence interval for the ratio of the logarithmic transformed AUC0-infinity values, as well as the logarithmic transformed Cmax values, of Diabetmin Retard over those of Glucophage Retard was within the acceptance criteria of 0.80-1.25.

Matched MeSH terms: Chemistry, Pharmaceutical
Development and Standardization of Moringa oleifera Leaves as a Natural Dietary Supplement

Ali MA, Yusof YA, Chin NL, Ibrahim MN, Muneer S

J Diet Suppl, 2019;16(1):66-85.
PMID: 29469600 DOI: 10.1080/19390211.2018.1429517

Moringa oleifera leaves were selected as a model due to their hundreds of health benefits. On the other hand, the powder of these leaves has exhibited poor flowability, low tensile strength, bitter taste, poor dissolution rate, and lack of information regarding dosage. These are the common hurdles and limitations in the adaptation of herbal-based medications. Therefore, a comprehensive study was planned to introduce herbal-based medicines into mainstream medicines by standardization according to the U.S. Food and Drug Administration (FDA) and international pharmaceutical standards. A Simplex Lattice Design (SLD) of Design Expert 8.0 software was used to formulate different concentrations of superdisintegrant, binder/diluent, and sweeteners. An Instron Universal Testing machine coupled with a 13 mm stainless cylindrical die was used to manufacture tablets by means of direct compression method at 20 kN applied force. Therefore, selection of excipients was made on the basis of their tensile strength, flowability, and taste-masking properties. Optimum formulation was tested on rabbits for toxicity and growth rate. All formulated tablets were evaluated on standard parameters for orally disintegrating tablets described by the Food and Drug Authority (U.S.). The optimum formulation fulfills all standard parameters such as hardness, disintegration time, friability, and dissolution rate. The present formulation showed no toxicity when tested on rabbits. The present study provides a fundamental understanding of the tableting characteristics of natural medicines. The present study provides information that will help to overcome the challenges.

Matched MeSH terms: Chemistry, Pharmaceutical
Fulltext Laboratory evaluation of lambda-cyhalothrin a microencapsulated formulation on mosquito nets for control of vector mosquitos

Vythilingam I, Zainal AR, Hamidah T

Southeast Asian J Trop Med Public Health, 1999 Mar;30(1):177-83.
PMID: 10695808

Two formulations of lambda-cyhalothrin (EC-Emulsion concentrate and MC-Microencapsulated) were impregnated into bednets made of polyethylene and polyester. The nets were treated at a dosage of 15 mg/m2. For bioassay of insecticidal efficacy, female Anopheles maculatus and Aedes aegypti were exposed to the nets for two minutes and mortality was scored 24 hours later. The nets were also tested after repeated washings with water and with soap and water. Microencapsulated (2.5CS) formulation was more effective than emulsion concentrate (2.5EC) formulation on both net materials--polyethylene and polyester. Repeated washing with water and soap reduces the efficacy of all bednet treatment combinations. Microencapsulated formulation on polyethylene gave best results; it could sustain up to five washes with water and two with soap and water.

Matched MeSH terms: Chemistry, Pharmaceutical
Fulltext Preparation and characterization of a gastric floating dosage form of capecitabine

Taghizadeh Davoudi E, Ibrahim Noordin M, Kadivar A, Kamalidehghan B, Farjam AS, Akbari Javar H

Biomed Res Int, 2013;2013:495319.
PMID: 24288681 DOI: 10.1155/2013/495319

Gastrointestinal disturbances, such as nausea and vomiting, are considered amongst the main adverse effects associated with oral anticancer drugs due to their fast release in the gastrointestinal tract (GIT). Sustained release formulations with proper release profiles can overcome some side effects of conventional formulations. The current study was designed to prepare sustained release tablets of Capecitabine, which is approved by the Food and Drug Administration (FDA) for the treatment of advanced breast cancer, using hydroxypropyl methylcellulose (HPMC), carbomer934P, sodium alginate, and sodium bicarbonate. Tablets were prepared using the wet granulation method and characterized such that floating lag time, total floating time, hardness, friability, drug content, weight uniformity, and in vitro drug release were investigated. The sustained release tablets showed good hardness and passed the friability test. The tablets' floating lag time was determined to be 30-200 seconds, and it floated more than 24 hours and released the drug for 24 hours. Then, the stability test was done and compared with the initial samples. In conclusion, by adjusting the right ratios of the excipients including release-retarding gel-forming polymers like HPMC K4M, Na alginate, carbomer934P, and sodium bicarbonate, sustained release Capecitabine floating tablet was formulated.

Matched MeSH terms: Chemistry, Pharmaceutical*
Evaluation of extemporaneously manufactured topical gels containing aceclofenac on inflammation and hyperalgesia in rats

Pabreja K, Dua K, Padi SS

Curr Drug Deliv, 2010 Oct;7(4):324-8.
PMID: 20695843

The systemic use of non-steroidal anti-inflammatory drugs (NSAIDs) which act by inhibiting cyclooxygenase (COX) is severely hampered by gastric and peptic ulcers. The topical delivery of NSAIDs has the advantages of avoiding gastric and peptic ulcers and delivering the drug to the inflammation site. Importance of aceclofenac as a new generational NSAID has inspired the development of topical dosage forms. This mode of administration may help to avoid typical side effects of NSAIDs associated with oral and systemic administration such as gastric irritation, particularly diarrhoea, nausea, abdominal pain and flatulence. The aim of this study was to formulate topical gel containing 1% of aceclofenac in carbopol and PEG base and to evaluate it for analgesic and antiinflammatory activity using carrageenan-induced thermal hyperalgesia and paw oedema in rats. Carrageenan administration into the hind paw produced a significant inflammation associated with hyperalgesia as shown by decreased rat paw withdrawal latency in response to a thermal stimulus (47+/-0.5 degrees C) 4 h after carrageenan injection. Topical application of AF1 significantly attenuated the development of hypersensitivity to thermal stimulus as compared to control (P<0.05) and other formulation treated groups (P<0.05). All the AF semisolid formulations, when applied topically 2 h before carrageenan administration, inhibited paw edema in a timedependent manner with maximum percent edema inhibition of 80.33+/-2.52 achieved with AF1 after 5 h of carrageenan administration However, topical application of AF2 markedly prevented the development of edema as compared to other formulation (AF2 and AF3) treated groups (P<0.05). Among all the semisolid formulations, Carbopol gel base was found to be most suitable dermatological base for aceclofenac.

Matched MeSH terms: Chemistry, Pharmaceutical/methods*
AChE inhibitor: a regio- and stereo-selective 1,3-dipolar cycloaddition for the synthesis of novel substituted 5,6-dimethoxy spiro[5.3']-oxindole-spiro-[6.3″]-2,3-dihydro-1H-inden-1″-one-7-(substituted aryl)-tetrahydro-1H-pyrrolo[1,2-c][1,3]thiazole

Ashraf Ali M, Ismail R, Choon TS, Kumar RS, Osman H, Arumugam N, et al.

Bioorg Med Chem Lett, 2012 Jan 1;22(1):508-11.
PMID: 22142546 DOI: 10.1016/j.bmcl.2011.10.087

Pyrrolothiazolyloxindole analogues share vital pharmacological properties, considered useful in Alzheimer's disease (AD). The aim of this study was synthesis and evaluate pyralothiazolyloxindole analogues if possess acetyl cholinesterase (AChE) inhibitory activity. The easily accessible one-pot synthesis of these compounds resulted to be significantly less difficult and expensive than that of donepezil. Several compounds possess anti-cholinesterase activity in the order of micro and sub-micromolar. Particularly, compound was the most potent inhibitors of the series against acetyl cholinesterase enzyme with IC(50) 0.11μmol/L.

Matched MeSH terms: Chemistry, Pharmaceutical/methods
Safety against nephrotoxicity in paclitaxel treatment: Oral nanocarrier as an effective tool in preclinical evaluation with marked in vivo antitumor activity

Choudhury H, Gorain B, Tekade RK, Pandey M, Karmakar S, Pal TK

Regul Toxicol Pharmacol, 2017 Dec;91:179-189.
PMID: 29080846 DOI: 10.1016/j.yrtph.2017.10.023

Oral paclitaxel (PTXL) formulations freed from cremophor® EL (CrEL) is always in utmost demand by the cancerous patients due to toxicities associated with the currently marketed formulation. In our previous investigation [Int. J. Pharm. 2014; 460:131], we have developed an oral oil based nanocarrier for the lipophilic drug, PTXL to target bioavailability issue and patient compliance. Here, we report in vivo antitumor activity and 28-day sub-chronic toxicity of the developed PTXL nanoemulsion. It was observed that the apoptotic potential of oral PTXL nanoemulsion significantly inhibited the growth of solid tumor (59.2 ± 7.17%; p

Matched MeSH terms: Chemistry, Pharmaceutical/methods
Influence of lipolysis and droplet size on tocotrienol absorption from self-emulsifying formulations

Yap SP, Yuen KH

Int J Pharm, 2004 Aug 20;281(1-2):67-78.
PMID: 15288344

A single dose comparative bioavailability study was conducted to evaluate the bioavailability of tocotrienols from two self-emulsifying formulations, one of which produced an emulsion that readily lipolysed under in vitro condition (SES-A), while the other produced a finer dispersion with negligible lipolysis (SES-B) in comparison with that of a non-self-emulsifying formulation in soya oil. The study was conducted according to a three-way crossover design using six healthy human volunteers. Statistically significant differences were observed between the logarithmic transformed peak plasma concentration (Cmax) and total area under the plasma concentration-time curve (AUC(0-infinity)) values of both SES-A and -B compared to NSES-C indicating that SES-A and -B achieved a higher extent of absorption compared to NSES-C. Moreover, the 90% confidence interval of the AUC(0-infinity) values of both SES-A and -B over those of NSES-C were between 2-3 suggesting an increase in bioavailability of about two-three times compared to NSES-C. Both SES-A and -B also achieved a faster onset of absorption. However, both SES-A and -B had comparable bioavailability, despite the fact that SES-B was able to form emulsions with smaller droplet size. Thus, it appeared that both droplet sizes as well as the rate and extent of lipolysis of the emulsion products formed were important for enhancing the bioavailability of the tocotrienols from the self-emulsifying systems.

Matched MeSH terms: Chemistry, Pharmaceutical/methods
Tumor regression and modulation of gene expression via tumor-targeted tocotrienol niosomes

Tan DM, Fu JY, Wong FS, Er HM, Chen YS, Nesaretnam K

Nanomedicine (Lond), 2017 Oct;12(20):2487-2502.
PMID: 28972460 DOI: 10.2217/nnm-2017-0182

AIM: To develop 6-O-palmitoyl-ascorbic acid-based niosomes targeted to transferrin receptor for intravenous administration of tocotrienols (T3) in breast cancer.
MATERIALS & METHODS: Niosomes were prepared using film hydration and ultrasonication methods. Transferrin was coupled to the surface of niosomes via chemical linker. Nanovesicles were characterized for size, zeta potential, morphology, stability and biological efficacy.
RESULTS: When evaluated in MDA-MB-231 cells, entrapment of T3 in niosomes caused 1.5-fold reduction in IC50 value compared with nonformulated T3. In vivo, the average tumor volume of mice treated with tumor-targeted niosomes was 12-fold lower than that of untreated group, accompanied by marked downregulation of three genes involved in metastasis.
CONCLUSION: Findings suggested that tumor-targeted niosomes served as promising delivery system for T3 in cancer therapy.

Matched MeSH terms: Chemistry, Pharmaceutical/methods
Punctal plug: a medical device to treat dry eye syndrome and for sustained drug delivery to the eye

Yellepeddi VK, Sheshala R, McMillan H, Gujral C, Jones D, Raghu Raj Singh T

Drug Discov Today, 2015 Jul;20(7):884-9.
PMID: 25668579 DOI: 10.1016/j.drudis.2015.01.013

Punctal plugs (PPs) are miniature medical implants that were initially developed for the treatment of dry eyes. Since their introduction in 1975, many PPs made from different materials and designs have been developed. PPs, albeit generally successful, suffer from drawbacks such as epiphora and suppurative canaliculitis. To overcome these issues intelligent designs of PPs were proposed (e.g. SmartPLUG™ and Form Fit™). PPs are also gaining interest among pharmaceutical scientists for sustaining drug delivery to the eye. This review aims to provide an overview of PPs for dry eye treatment and drug delivery to treat a range of ocular diseases. It also discusses current challenges in using PPs for ocular diseases.

Matched MeSH terms: Chemistry, Pharmaceutical
Development and anti-microbial potential of topical formulations containing Cocos nucifera Linn

Sheshala R, Ying LT, Hui LS, Barua A, Dua K

Antiinflamm Antiallergy Agents Med Chem, 2013;12(3):253-64.
PMID: 23746224

In order to achieve better treatment for local wounds and bacterial infections, topical formulations containing Cocos nucifera Linn. were developed. These formulations were evaluated for their physicochemical properties and antimicrobial efficacy against various strains of microorganisms. Semisolid formulations containing 5% w/w of Cocos nucifera Linn. were prepared by employing different dermatological bases and were evaluated for their physical appearance, pH, rheological properties, FTIR-spectroscopic analysis, thermodynamic stability and stability studies. The antimicrobial activity of each prepared formulation was determined using disk-diffusion method against various strains of microorganisms. All the prepared formulations were found to be stable and exhibited suitable physicochemical characteristics including pH, viscosity and spreadability which are necessary for an ideal topical preparation, in addition to strong antimicrobial activity. Carbopol gel base was found to be the most suitable dermatological base for Cocos nucifera Linn. in comparsion to other bases. Cocos nucifera Linn. formulations showed great potential for wounds and local bacterial infections. Moreover, carbopol gel base with its aesthetic appeal was found to be a suitable dermatological base for Cocos nucifera Linn. semisolid formulation as it had demonstrated significant physicochemical properties and greater diffusion when assessed using disk- diffusion method.

Matched MeSH terms: Chemistry, Pharmaceutical
Cytotoxicity evaluation of vancomycin and its complex with beta-cyclodextrin on human glial cell line

Sofian ZM, Abdullah JM, Rahim AA, Shafee SS, Mustafa Z, Razak SA

Pak J Pharm Sci, 2012 Oct;25(4):831-7.
PMID: 23010001

The possible cytotoxic effects of vancomycin and its complex with beta-cyclodextrin (β-CD) on human glial cell line (CRL 8621) were studied accordingly by means of MTS assay. The cultured cells were incubated with various concentrations of vancomycin, β-CD as well as β-CD/vancomycin complex ranging from 4.69 to 300 ug/ml. A linear dose-dependency cytotoxicity followed by hermetic-like biphasic dose-dependence was observed after incubation period of 72 hours. In general, significant increase (p<0.001) of cell proliferation was observed at lower concentrations: <18.75 μg/ml for cells treated with β-CD and their complex while < 9.38 μg/ml for cells treated with vancomycin. In contrary, regardless of the treatments given, significant (p<0.001) reduce in cell survival was found at higher concentrations >150 μg/ml. In particular, 50 % inhibitory in vitro was achieved at the concentrations of 115.95 μg/ml (for β-CD), 116.48 μg/ml (for vancomycin) and 115.44 μg/ml (for β-CD/vancomycin complex).

Matched MeSH terms: Chemistry, Pharmaceutical
Agrowaste-based nanofibers as a probiotic encapsulant: fabrication and characterization

Fung WY, Yuen KH, Liong MT

J Agric Food Chem, 2011 Aug 10;59(15):8140-7.
PMID: 21711050 DOI: 10.1021/jf2009342

This study explored the potential of soluble dietary fiber (SDF) from agrowastes, okara (soybean solid waste), oil palm trunk (OPT), and oil palm frond (OPF) obtained via alkali treatment, in the nanoencapsulation of Lactobacillus acidophilus . SDF solutions were amended with 8% poly(vinyl alcohol) to produce nanofibers using electrospinning technology. The spinning solution made from okara had a higher pH value at 5.39 ± 0.01 and a higher viscosity at 578.00 ± 11.02 mPa·s (P < 0.05), which resulted in finer fibers. FTIR spectra of nanofibers showed the presence of hemicellulose material in the SDF. Thermal behavior of nanofibers suggested possible thermal protection of probiotics in heat-processed foods. L. acidophilus was incorporated into the spinning solution to produce nanofiber-encapsulated probiotic, measuring 229-703 nm, visible under fluorescence microscopy. Viability studies showed good bacterial survivability of 78.6-90% under electrospinning conditions and retained viability at refrigeration temperature during the 21 day storage study.

Matched MeSH terms: Chemistry, Pharmaceutical

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links