Displaying publications 161 - 180 of 2919 in total

Abstract:
Sort:
  1. Fulltext Effect of a Different Number of Amine-Functional Groups on the Gas Sorption and Permeation Behavior of a Hybrid Membrane Comprising of Impregnated Linde T and 4,4'- (Hexafluoroisopropylidene) Diphthalic Anhydride-Derived Polyimide
    Jusoh N, Yeong YF, Lock SSM, Yub Harun N, Mohd Yusoff MH
    Polymers (Basel), 2019 Nov 04;11(11).
    PMID: 31689895 DOI: 10.3390/polym11111807
    The bottleneck of conventional polymeric membranes applied in industry has a tradeoff between permeability and selectivity that deters its widespread expansion. This can be circumvented through a hybrid membrane that utilizes the advantages of inorganic and polymer materials to improve the gas separation performance. The approach can be further enhanced through the incorporation of amine-impregnated fillers that has the potential to minimize defects while simultaneously enhancing gas affinity. An innovative combination between impregnated Linde T with different numbers of amine-functional groups (i.e., monoamine, diamine, and triamine) and 4,4'-(hexafluoroisopropylidene) diphthalic anhydride (6FDA)-derived polyimide has been elucidated to explore its potential in CO2/CH4 separation. Detailed physical properties (i.e., free volume and glass transition temperature) and gas transport behavior (i.e., solubility, permeability, and diffusivity) of the fabricated membranes have been examined to unveil the effect of different numbers of amine-functional groups in Linde T fillers. It was found that a hybrid membrane impregnated with Linde T using a diamine functional group demonstrated the highest improvement compared to a pristine polyimide with 3.75- and 1.75-fold enhancements in CO2/CH4 selectivities and CO2 permeability, respectively, which successfully lies on the 2008 Robeson's upper bound. The novel coupling of diamine-impregnated Linde T and 6FDA-derived polyimide is a promising candidate for application in large-scale CO2 removal processes.
    Matched MeSH terms: Temperature; Transition Temperature
  2. Investigation of heat mass transfer for combined convective slips flow: a lie group analysis
    Md. Jashim Uddin, Md. Ismail A, Hamad M
    Sains Malaysiana, 2012;41:1139-1148.
    The steady laminar combined convective flow with heat and mass transfer of a Newtonian viscous incompressible fluid over a permeable flat plate with linear hydrodynamic and thermal slips has been investigated numerically. The velocity of the external flow, the suction/injection velocity and the temperature of the plate surface are assumed to vary nonlinearly following the power law with the distance along the plate from the origin. Lie group analysis is used to develop the similarity transformations and the governing momentum, the energy conservation and the mass conservation equations are converted to a system of coupled nonlinear ordinary differential equations with the associated boundary conditions. The resulting equations are solved numerically using the Runge-Kutta-Fehlberg fourth-fifth order numerical method. The effects of hydrodynamic slip parameter (a), thermal slip parameter (b), suction/injection parameter (fw), power law parameter (m), buoyancy ratio parameter (N), Prandtl number (Pr) and Schmidt number (Sc) on the fluid flow, heat transfer and mass transfer characteristics are investigated and presented graphically. We have also shown the effects of the Reynolds number (Re) and the power law parameter (m) on the velocity slip and the thermal slip factors. Good agreement is found between the numerical results of the present paper and published results.
    Matched MeSH terms: Hot Temperature; Temperature
  3. Mixed convection flow about a solid sphere embedded in a porous medium filled with a nanofluid
    Tham L, Roslindar Nazar
    Sains Malaysiana, 2012;41:1643-1649.
    A steady laminar mixed convection boundary layer flow about an isothermal solid sphere embedded in a porous medium filled with a nanofluid has been studied for both cases of assisting and opposing flows. The transformed boundary layer equations were solved numerically using an implicit finite-difference scheme. Three different types of nanoparticles, namely Cu, Al2O3 and TiO2 in water-based fluid were considered. Numerical solutions were obtained for the skin friction coefficient, the velocity and temperature profiles. The features of the flow and heat transfer characteristics for various values of the nanoparticle volume fraction and the mixed convection parameters were analyzed and discussed.
    Matched MeSH terms: Hot Temperature; Temperature
  4. Partial slip effect on heat and mass transfer of MHD peristaltic transport in a porous medium
    Mehmood OU, Norzie Mustapha, Sharidan Shafie, Hayat T
    Sains Malaysiana, 2014;43:1109-1118.
    This research looks at the effects of partial slip on heat and mass transfer of peristaltic transport. The magnetohydrodynamic (MHD) flow of viscous fluid in a porous asymmetric channel has been considered. The exact solutions for the stream function, longitudinal pressure gradient, longitudinal velocity, shear stress, temperature and concentration fields are derived by adopting long wavelength and small Reynolds number approximations. The results showed that peristaltic pumping and trapping are reduced with increasing velocity slip parameter. Furthermore, temperature increases with increasing thermal slip parameter. Moreover, the concentration profile decreases with increasing porosity parameter, Schmidt number and concentration slip parameter. Comparisons with published results are found to be in good agreement.
    Matched MeSH terms: Hot Temperature; Temperature
  5. Combined similarity-numerical solutions of MHD boundary layer slip flow of non-Newtonian power-law nanofluids over a radiating moving plate
    Nur Husna Md. Yusoff, Md. Jashim Uddin, Ahmad Izani Md. Ismail
    Sains Malaysiana, 2014;43:151-159.
    A combined similarity-numerical solution of the magnetohydrodynamic boundary layer slip flow of an electrically conducting non-Newtonian power-law nanofluid along a heated radiating moving vertical plate is explored. Our nanofluid model incorporates the influences of the thermophoresis and the Brownian motion. The basic transport equations are made dimensionless first and then suitable similarity transformations are applied to reduce them into a set of nonlinear ordinary differential equations with the associated boundary conditions. The reduced equations are then solved numerically. Graphical results for the non-dimensional flow velocity, the temperature and the nanoparticles volume fraction profiles as well as for the friction factor, the local Nusselt and the Sherwood numbers are exhibited and examined for various values of the controlling parameters to display the interesting aspects of the solutions. It was found that the friction factor increases with the increase of the magnetic field (M), whilst it is decreased with the linear momentum slip parameter (a). The linear momentum slip parameter (a) reduces the heat transfer rates and the nanoparticles volume fraction rates. Our results are compatible with the existing results for a special case.
    Matched MeSH terms: Hot Temperature; Temperature
  6. Horizontal heat flux between urban buildings and soil and its influencing factors
    Zhou H, Wang X, Li Y, Han F, Hu D
    Sains Malaysiana, 2016;45:689-697.
    The soil temperature near four external walls with different orientations was investigated in spring and summer. In both
    seasons, the soil temperature was higher in the positions closest to the buildings, suggesting that the buildings were a
    heat source for the soil surrounding them. Therefore, it could be confirmed that there was lateral heat transfer between
    the soil and the buildings. Based on this, a soil heat flux plate was set between the soil and the buildings to investigate the
    horizontal heat flux. The data showed diurnal variations of the horizontal heat flux in both spring and summer. In order
    to determine the factors that influenced the horizontal heat flux and to provide a basis to understand its mechanism, the
    correlations between the data of several meteorological factors and the horizontal heat flux were analysed. The results
    showed that solar radiation was significantly correlated with the horizontal heat flux (p<0.0001) in any single season and
    in the two seasons that were studied. Additionally, other meteorological factors (net radiation, air temperature, relative
    humidity and soil temperature and moisture) showed strong correlations with the horizontal heat flux on a diurnal scale
    only. On a seasonal time scale, the correlation might be significant (p<0.0001) as well, but the correlation coefficients
    decreased too significantly, such as those for soil temperature, air temperature and relative humidity. Alternatively, the
    correlation might not be significant (p>0.05), such as that for soil moisture. The stepwise regression results indicated
    that the relative importance of these meteorological factors was 48.63, 21.94, 14.44, 8.12 and 6.87% for solar radiation,
    soil temperature, air temperature, relative humidity and soil moisture, respectively, on a diurnal scale.
    Matched MeSH terms: Hot Temperature; Temperature
  7. Mechanical properties of Bitumen Quenched dual phase steel
    M.O.H. Amuda, T.A. Olaniyan, L.O. Osoba, E.T. Akinlabi
    Sains Malaysiana, 2017;46:743-753.
    The mechanical properties of Dual Phase Steel (DPS)-duplex structure-produced by quenching in pre-heated bitumen have been investigated. Medium carbon steels intercritically heated at different temperatures and holding times were quenched in hot bitumen. Optical and scanning electron microscopy characterisation of the duplex structure showed extensive network of fibrous martensite in a ferritic matrix with occasional presence of polygonal martensite. The duplex phase structure exhibited continuous yielding dynamics, improving the tensile and hardness values by about 42 and 35%, respectively, relative to the normalised structure. But, the elongation and impact values decreased by about 42 and 50%, respectively, when compared to the normalised structure. These values are similar to those obtained in duplex structure produced using conventional oil quenching. The tensile fractured surface showed transition between a predominantly cleavage mode in the lower annealing temperature to a mixed mode in the upper bound of the annealing temperature. These findings suggest that pre-heated bitumen can be exploited for the production of DPSs.
    Matched MeSH terms: Cold Temperature; Temperature
  8. Fulltext Influence of Temperature Reaction for the CdSe-TiO2 Nanotube Thin Film Formation via Chemical Bath Deposition in Improving the Photoelectrochemical Activity
    Lai CW, Samsudin NA, Low FW, Abd Samad NA, Lau KS, Chou PM, et al.
    Materials (Basel), 2020 Jun 03;13(11).
    PMID: 32503128 DOI: 10.3390/ma13112533
    In this present work, we report the deposition of cadmium selenide (CdSe) particles on titanium dioxide (TiO2) nanotube thin films, using the chemical bath deposition (CBD) method at low deposition temperatures ranging from 20 to 60 °C. The deposition temperature had an influence on the overall CdSe-TiO2 nanotube thin film morphologies, chemical composition, phase transition, and optical properties, which, in turn, influenced the photoelectrochemical performance of the samples that were investigated. All samples showed the presence of CdSe particles in the TiO2 nanotube thin film lattice structures with the cubic phase CdSe compound. The amount of CdSe loading on the TiO2 nanotube thin films were increased and tended to form agglomerates as a function of deposition temperature. Interestingly, a significant enhancement in photocurrent density was observed for the CdSe-TiO2 nanotube thin films deposited at 20 °C with a photocurrent density of 1.70 mA cm-2, which was 17% higher than the bare TiO2 nanotube thin films. This sample showed a clear surface morphology without any clogged nanotubes, leading to better ion diffusion, and, thus, an enhanced photocurrent density. Despite having the least CdSe loading on the TiO2 nanotube thin films, the CdSe-TiO2 nanotube thin films deposited at 20 °C showed the highest photocurrent density, which confirmed that a small amount of CdSe is enough to enhance the photoelectrochemical performance of the sample.
    Matched MeSH terms: Cold Temperature; Temperature
  9. Fulltext Rheological Study of Phenol Formaldehyde Resole Resin Synthesized for Laminate Application
    Kamarudin N, Awang Biak DR, Zainal Abidin Z, Cardona F, Sapuan SM
    Materials (Basel), 2020 Jun 05;13(11).
    PMID: 32516968 DOI: 10.3390/ma13112578
    Heat explosions are sometimes observed during the synthesis of phenol formaldehyde (PF) resin. This scenario can be attributed to the high latent heat that was released and not dissipated leading to the occurrence of a runaway reaction. The synthesis temperature and time played important roles in controlling the heat release, hence preventing the resin from hardening during the synthesis process. This study aims to assess the rheological and viscoelasticity behaviors of the PF resin prepared using paraformaldehyde. The prepared PF resin was designed for laminate applications. The rheological behavior of the PF resin was assessed based on the different molar ratios of phenol to paraformaldehyde (P:F) mixed in the formulation. The molar ratios were set at 1.00:1.25, 1.00:1.50 and 1.00:1.75 of P to F, respectively. The rheological study was focused at specific synthesis temperatures, namely 40, 60, 80 and 100 °C. The synthesis time was observed for 240 min; changes in physical structure and viscosity of the PF resins were noted. It was observed that the viscosity values of the PF resins prepared were directly proportional to the synthesis temperature and the formaldehyde content. The PF resin also exhibited shear thickening behavior for all samples synthesized at 60 °C and above. For all PF resin samples synthesized at 60 °C and above, their viscoelasticity results indicated that the storage modulus (G'), loss modulus(G″) and tan δ are proportionally dependent on both the synthesis temperature and the formaldehyde content. Heat explosions were observed during the synthesis of PF resin at the synthesis temperature of 100 °C. This scenario can lead to possible runaway reaction which can also compromise the safety of the operators.
    Matched MeSH terms: Hot Temperature; Temperature
  10. Fulltext Green Composites Made of Bamboo Fabric and Poly (Lactic) Acid for Packaging Applications-A Review
    Nurul Fazita MR, Jayaraman K, Bhattacharyya D, Mohamad Haafiz MK, Saurabh CK, Hussin MH, et al.
    Materials (Basel), 2016 Jun 01;9(6).
    PMID: 28773558 DOI: 10.3390/ma9060435
    Petroleum based thermoplastics are widely used in a range of applications, particularly in packaging. However, their usage has resulted in soaring pollutant emissions. Thus, researchers have been driven to seek environmentally friendly alternative packaging materials which are recyclable as well as biodegradable. Due to the excellent mechanical properties of natural fibres, they have been extensively used to reinforce biopolymers to produce biodegradable composites. A detailed understanding of the properties of such composite materials is vital for assessing their applicability to various products. The present review discusses several functional properties related to packaging applications in order to explore the potential of bamboo fibre fabric-poly (lactic) acid composites for packaging applications. Physical properties, heat deflection temperature, impact resistance, recyclability and biodegradability are important functional properties of packaging materials. In this review, we will also comprehensively discuss the chronological events and applications of natural fibre biopolymer composites.
    Matched MeSH terms: Hot Temperature; Temperature
  11. Fulltext Employment of single-diode model to elucidate the variations in photovoltaic parameters under different electrical and thermal conditions
    Muhammad FF, Yahya MY, Hameed SS, Aziz F, Sulaiman K, Rasheed MA, et al.
    PLoS One, 2017;12(8):e0182925.
    PMID: 28793325 DOI: 10.1371/journal.pone.0182925
    In this research work, numerical simulations are performed to correlate the photovoltaic parameters with various internal and external factors influencing the performance of solar cells. Single-diode modeling approach is utilized for this purpose and theoretical investigations are compared with the reported experimental evidences for organic and inorganic solar cells at various electrical and thermal conditions. Electrical parameters include parasitic resistances (Rs and Rp) and ideality factor (n), while thermal parameters can be defined by the cells temperature (T). A comprehensive analysis concerning broad spectral variations in the short circuit current (Isc), open circuit voltage (Voc), fill factor (FF) and efficiency (η) is presented and discussed. It was generally concluded that there exists a good agreement between the simulated results and experimental findings. Nevertheless, the controversial consequence of temperature impact on the performance of organic solar cells necessitates the development of a complementary model which is capable of well simulating the temperature impact on these devices performance.
    Matched MeSH terms: Temperature*
  12. Fulltext Modelling of rheological behaviour of guava, pomelo and soursop juice concentrates via shear rate-temperature-concentration superpositioning
    Abdullah N, Chin NL, Yusof YA, Talib RA
    J Food Sci Technol, 2018 Mar;55(3):1207-1213.
    PMID: 29487464 DOI: 10.1007/s13197-017-3024-7
    The steady-state flow test was conducted on pink-fleshed guava, pink-fleshed pomelo and soursop juice concentrates using a rheometer to understand its rheological behaviour. The power law model was used and a master-curve was created using the shear rate-temperature-concentration superposition technique to predict rheological properties from a wide range of temperatures and concentrations. All three juice concentrates undergo a double horizontal shift whilst the pink-fleshed guava required an additional vertical shift. The final equations show shear-thinning behaviour of pink-fleshed guava, pink-fleshed pomelo and soursop with flow behaviour index of 0.2217, 0.7507 and 0.6347, respectively. The final master-curve predicts shear stress at wide range of shear rates, i.e. between 10-2 and 106 s-1 for the pink-fleshed guava, 100 and 106 s-1 for the pink-fleshed pomelo and 100 and 107 s-1 for the soursop. The results provide useful information and effective technique to predict fruit juice concentrates behaviour affected by heat changes during processing.
    Matched MeSH terms: Hot Temperature; Temperature
  13. Fulltext Natural Convection Flow of a Nanofluid in an Inclined Square Enclosure Partially Filled with a Porous Medium
    Alsabery AI, Chamkha AJ, Saleh H, Hashim I
    Sci Rep, 2017 05 24;7(1):2357.
    PMID: 28539585 DOI: 10.1038/s41598-017-02241-x
    This work analyses free convection flow of a nanofluid in an inclined square enclosure consisting of a porous layer and a nanofluid layer using the finite difference methodology. Sinusoidal temperature boundary conditions are imposed on the two opposing vertical walls. Nanofluids with water as base and Ag or Cu or Al2O3 or TiO2 nanoparticles are considered for the problem. The related parameters of this study are the Darcy number, nanoparticle volume fraction, phase deviation, amplitude ratio, porous layer thickness and the inclination angle of the cavity. A comparison with previously published work is performed and the results are in good agreement. Detailed numerical data for the fluid flow and thermal distributions inside the square enclosure, and the Nusselt numbers are presented. The obtained results show that the heat transfer is considerably affected by the porous layer increment. Several nanoparticles depicted a diversity improvement on the convection heat transfer.
    Matched MeSH terms: Hot Temperature; Temperature
  14. Fulltext Transfer free graphene growth on SiO2 substrate at 250 °C
    Vishwakarma R, Rosmi MS, Takahashi K, Wakamatsu Y, Yaakob Y, Araby MI, et al.
    Sci Rep, 2017 03 02;7:43756.
    PMID: 28251997 DOI: 10.1038/srep43756
    Low-temperature growth, as well as the transfer free growth on substrates, is the major concern of graphene research for its practical applications. Here we propose a simple method to achieve the transfer free graphene growth on SiO2 covered Si (SiO2/Si) substrate at 250 °C based on a solid-liquid-solid reaction. The key to this approach is the catalyst metal, which is not popular for graphene growth by chemical vapor deposition. A catalyst metal film of 500 nm thick was deposited onto an amorphous C (50 nm thick) coated SiO2/Si substrate. The sample was then annealed at 250 °C under vacuum condition. Raman spectra measured after the removal of the catalyst by chemical etching showed intense G and 2D peaks together with a small D and intense SiO2 related peaks, confirming the transfer free growth of multilayer graphene on SiO2/Si. The domain size of the graphene confirmed by optical microscope and atomic force microscope was about 5 μm in an average. Thus, this approach will open up a new route for transfer free graphene growth at low temperatures.
    Matched MeSH terms: Cold Temperature; Temperature
  15. Fulltext Asymmetric impact of temperature on COVID-19 spread in India: Evidence from quantile-on-quantile regression approach
    Irfan M, Razzaq A, Suksatan W, Sharif A, Madurai Elavarasan R, Yang C, et al.
    J Therm Biol, 2022 Feb;104:103101.
    PMID: 35180949 DOI: 10.1016/j.jtherbio.2021.103101
    The emergence of new coronavirus (SARS-CoV-2) has become a significant public health issue worldwide. Some researchers have identified a positive link between temperature and COVID-19 cases. However, no detailed research has highlighted the impact of temperature on COVID-19 spread in India. This study aims to fill this research gap by investigating the impact of temperature on COVID-19 spread in the five most affected Indian states. Quantile-on-Quantile regression (QQR) approach is employed to examine in what manner the quantiles of temperature influence the quantiles of COVID-19 cases. Empirical results confirm an asymmetric and heterogenous impact of temperature on COVID-19 spread across lower and higher quantiles of both variables. The results indicate a significant positive impact of temperature on COVID-19 spread in the three Indian states (Maharashtra, Andhra Pradesh, and Karnataka), predominantly in both low and high quantiles. Whereas, the other two states (Tamil Nadu and Uttar Pradesh) exhibit a mixed trend, as the lower quantiles in both states have a negative effect. However, this negative effect becomes weak at middle and higher quantiles. These research findings offer valuable policy recommendations.
    Matched MeSH terms: Temperature*
  16. Nanofluid heat transfer under mixed convection flow in a tube for solar thermal energy applications
    Sekhar YR, Sharma KV, Kamal S
    Environ Sci Pollut Res Int, 2016 May;23(10):9411-7.
    PMID: 26593731 DOI: 10.1007/s11356-015-5715-9
    The solar flat plate collector operating under different convective modes has low efficiency for energy conversion. The energy absorbed by the working fluid in the collector system and its heat transfer characteristics vary with solar insolation and mass flow rate. The performance of the system is improved by reducing the losses from the collector. Various passive methods have been devised to aid energy absorption by the working fluid. Also, working fluids are modified using nanoparticles to improve the thermal properties of the fluid. In the present work, simulation and experimental studies are undertaken for pipe flow at constant heat flux boundary condition in the mixed convection mode. The working fluid at low Reynolds number in the mixed laminar flow range is undertaken with water in thermosyphon mode for different inclination angles of the tube. Local and average coefficients are determined experimentally and compared with theoretical values for water-based Al2O3 nanofluids. The results show an enhancement in heat transfer in the experimental range with Rayleigh number at higher inclinations of the collector tube for water and nanofluids.
    Matched MeSH terms: Hot Temperature*
  17. Fulltext Waste heat recovery research - a systematic bibliometric analysis (1991 to 2020)
    Kuah CT, Koh QY, Rajoo S, Wong KY
    Environ Sci Pollut Res Int, 2023 Jun;30(28):72074-72100.
    PMID: 35716302 DOI: 10.1007/s11356-022-21377-6
    Human usage of non-renewable energy resources has caused many environmental issues, which include air pollution, global warming, and climate irregularities. To counter these issues, researchers have been seeking after alternative renewable energy sources and ways to manage energy more efficiently. This is where energy recovery technologies such as waste heat recovery (WHR) come into play. WHR is a form of waste to energy conversion. Waste heat can be captured and converted into usable energy instead of dumping it into the environment. In the more recent years, the WHR research field has gained great attention in the scientific community as well as in some energy-intensive industries. This article presents a bibliometric overview of the academic research on WHR over the span of 30 years from 1991 to 2020. A total of 5682 documents from Web of Science (WoS) have been retrieved and analyzed using various bibliometric methods, including performance analysis and network analysis. The analyses were performed on different actors in the field, i.e., funding agencies, journals, authors, organizations, and countries. In addition, several network mappings were done based on co-citation, co-authorship, and co-occurrences of keywords analyses. The research identified the most productive and influential actors in the field, established and emergent research topics, as well as the interrelations and collaboration patterns between different actors. The findings can be a robust roadmap for further research in this field.
    Matched MeSH terms: Hot Temperature*
  18. The Application of Nature-Based Solutions for Urban Heat Island Mitigation in Asia: Progress, Challenges, and Recommendations
    Ramakreshnan L, Aghamohammadi N
    Curr Environ Health Rep, 2024 Mar;11(1):4-17.
    PMID: 38172471 DOI: 10.1007/s40572-023-00427-2
    PURPOSE OF REVIEW: Unprecedented urbanization in Asia affects the net radiation and energy flux of urban areas in the form of urban heat islands (UHI). The application of nature-based solutions (NbS) via urban green and blue infrastructures is a promising approach to mitigate UHI via urban boundary condition modifications, which affect the energy balance. This narrative review discusses the application of green and blue infrastructures in the Asian context by highlighting its progress, challenges, and recommendations. This review is descriptive in nature and includes perspectives on the discussed topics.

    RECENT FINDINGS: Studies on the application of green and blue infrastructures in UHI mitigation are still scant in Asia. Their cooling performance is greatly influenced by their types, size, geometry, surface roughness, spread (threshold distance), temporal scales, topography, pollution levels, prevailing climate, and assessment techniques. Distinct urban characteristics, climatic conditions, environmental risks, lack of awareness and expertise, lack of policy and government incentives, and limited scientific studies are the major challenges in their implementation of UHI mitigation in Asia. Although green and blue infrastructures are associated with urban cooling, more in-depth experimental work and multidisciplinary research collaboration are paramount to exploring its implementation potential in Asia and other countries that share similar urban and environmental characteristics.

    Matched MeSH terms: Hot Temperature*
  19. Toward a better understanding of the impact of bioenergy use on mortality rate in EU28 region
    Alsaleh M, Zubair AO, Abdul-Rahim AS
    Environ Sci Pollut Res Int, 2021 Jun;28(23):29831-29844.
    PMID: 33575938 DOI: 10.1007/s11356-021-12769-1
    The objective of this research is to examine the impact of bioenergy usage on health outcomes, especially adult mortality in both developed and underdeveloped countries in the European Union, where the use of solid biomass is growing to generate bioheat, biocool, and biopower. Over the period studied, findings indicate that increased consumption of bioenergy has increased mortality rates in developed and underdeveloped EU28 countries during the period 1990-2018. This feedback proposes, using generalized least squares (GLS), that the resulting death rate from burning biomass-related cases is higher in the EU15 developed countries compared to EU13 underdeveloped countries. There is a need to lower burning biomass in the entire EU15 countries, more importantly its developed region, by critically evaluating the bioenergy production life cycle before it is available for final consumption. However, there is a continuous need to intensify stringent production procedures in the bioenergy industry in EU15 countries, more importantly the imported biomass crops for energy use. There is also a need to be consistent with the campaign on the usage of bioenergy products, i.e., bioheat, bioelectricity, and biofuels, particularly in the rural areas where the use of wood fuels for cooking, heating, and cooling are significant in EU15 developed countries in comparison to EU13 developing countries.
    Matched MeSH terms: Cold Temperature*
  20. Fulltext Synergistic interaction between scrap tyre and plastics for the production of sulphur-free, light oil from fast co-pyrolysis
    Dewi WN, Zhou Q, Mollah M, Yang S, Ilankoon IMSK, Chaffee A, et al.
    Waste Manag, 2024 Apr 30;179:99-109.
    PMID: 38471253 DOI: 10.1016/j.wasman.2024.03.007
    Fast co-pyrolysis offers a sustainable solution for upcycling polymer waste, including scrap tyre and plastics. Previous studies primarily focused on slow heating rates, neglecting synergistic mechanisms and sulphur transformation in co-pyrolysis with tyre. This research explored fast co-pyrolysis of scrap tyre with polypropylene (PP), low-density polyethylene (LDPE), and polystyrene (PS) to understand synergistic effects and sulphur transformation mechanisms. A pronounced synergy was observed between scrap tyre and plastics, with the nature of the synergy being plastic-type dependent. Remarkably, blending 75 wt% PS or LDPE with tyre effectively eliminated sulphur-bearing compounds in the liquid product. This reduction in sulphur content can substantially mitigate the release of hazardous materials into the environment, emphasizing the environmental significance of co-pyrolysis. The synergy between PP or LDPE and tyre amplified the production of lighter hydrocarbons, while PS's interaction led to the creation of monocyclic aromatics. These findings offer insights into the intricate chemistry of scrap tyre and plastic interactions and highlight the potential of co-pyrolysis in waste management. By converting potential pollutants into valuable products, this method can significantly reduce the release of hazardous materials into the environment.
    Matched MeSH terms: Hot Temperature*
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links