Displaying publications 161 - 180 of 476 in total

Abstract:
Sort:
  1. Tan H, Wong KY, Othman MHD, Kek HY, Wahab RA, Ern GKP, et al.
    Environ Sci Pollut Res Int, 2022 Nov;29(53):80137-80160.
    PMID: 36194323 DOI: 10.1007/s11356-022-23407-9
    An indoor environment in a hospital building requires a high indoor air quality (IAQ) to overcome patients' risks of getting wound infections without interrupting the recovery process. However, several problems arose in obtaining a satisfactory IAQ, such as poor ventilation design strategies, insufficient air exchange, improper medical equipment placement and high door opening frequency. This paper presents an overview of various methods used for assessing the IAQ in hospital facilities, especially in an operating room, isolation room, anteroom, postoperative room, inpatient room and dentistry room. This review shows that both experimental and numerical methods demonstrated their advantages in the IAQ assessment. It was revealed that both airflow and particle tracking models could result in different particle dispersion predictions. The model selection should depend on the compatibility of the simulated result with the experimental measurement data. The primary and secondary forces affecting the characteristics of particle dispersion were also discussed in detail. The main contributing forces to the trajectory characteristics of a particle could be attributed to the gravitational force and drag force regardless of particle size. Meanwhile, the additional forces could be considered when there involves temperature gradient, intense light source, submicron particle, etc. The particle size concerned in a healthcare facility should be less than 20 μm as this particle size range showed a closer relationship with the virus load and a higher tendency to remain airborne. Also, further research opportunities that reflect a more realistic approach and improvement in the current assessment approach were proposed.
    Matched MeSH terms: Air Movements
  2. Yusoff NYM, Aris H, Nasiruddin WHM, Rusli AKC, Yurnaidi Z, Safrina R, et al.
    Environ Sci Pollut Res Int, 2024 Jul;31(35):48388-48405.
    PMID: 39028458 DOI: 10.1007/s11356-024-34358-8
    Renewable energy consumption is a crucial solution to addressing pressing environmental issues, particularly climate change and air pollution. Investigating the factors that drive its adoption is highly significant, as it provides policymakers and stakeholders with valuable insights to accelerate the transition to renewable energy sources. Through this approach, we can minimise the negative consequences of our reliance on fossil fuels, thereby protecting the integrity of the environment. Therefore, the primary goal of this study is to thoroughly investigate the main factors that influence renewable energy consumption and environmental change in six specifically chosen ASEAN countries. The stationarity of the 1990-2019 data was tested using panel data techniques such as Levin, Lin, and Chu (LLC), Im Pesaran (IPS), and the Shin W-stat test. According to the stationarity tests, after the first order, all variables exhibit stationarity. Additionally, Pedroni's co-integration test result confirmed that there was a long-term relationship among the variables. Different methods, such as dynamic ordinary least squares (DOLS), fully modified ordinary least squares (FMOLS), and pooled ordinary least squares (POLS), are used for cointegration estimating. The results suggest that there is a positive co-integration between renewable energy use and GDP in six ASEAN countries, indicating a long-term relationship. The positive relationship between GDP and renewable energy use suggests that economic growth is the primary driving force behind ASEAN's renewable energy adoption. However, factors like carbon emissions, population density, and foreign direct investment (FDI) negatively impact the demand for renewable energy. The limited availability of renewable energy in certain ASEAN countries may discourage foreign direct investment (FDI) due to the inverse relationship between FDI and renewable energy use. The studies also revealed that carbon emissions, which contribute to environmental pollution, do not motivate industries to invest in renewable energy. This finding would challenge the Environmental Kuznets Curve (EKC) hypothesis. According to the EKC, there is a significant transition towards renewable energy as a response to environmental degradation. However, it is worth noting that several ASEAN countries have experienced economic growth while also experiencing higher levels of carbon emissions. Given that economic expansion might not be environmentally beneficial, this research has implications for ASEAN energy policies. The ASEAN region faces a challenge in investing in renewable energy due to the excessive dependence on fossil fuels. Therefore, an in-depth evaluation of the main factor behind ASEAN's environmental concerns, which promotes the adoption of renewable energy, can greatly influence policy decisions, particularly in attaining net zero emissions. Policymakers can utilise this comprehensive analysis to establish informed objectives for policies related to renewable energy and develop strategic plans, i.e. reforming fuel subsidies. The goal is to encourage the development of environmentally friendly and sustainable energy plans for the future in the ASEAN region.
    Matched MeSH terms: Air Pollution
  3. Sarvesvaran R
    Malays J Pathol, 1991 Dec;13(2):89-100.
    PMID: 1823096
    An adult male sustained a number of stab injuries and other injuries including a fatal stab injury to the neck. There was evidence of air embolism which was considered to be a major factor causing death. The discussion is in four parts. Part I is confined to the post mortem examination. Part II relates to the medico-legal aspects of the case. Part III is a general discussion on embolism and its medico-legal significance whilst Part IV is on the medico-legal aspects of air embolism.
    Matched MeSH terms: Embolism, Air/complications; Embolism, Air/etiology; Embolism, Air/mortality; Embolism, Air/pathology*
  4. Ishii S, Bell JN, Marshall FM
    Environ Pollut, 2007 Nov;150(2):267-79.
    PMID: 17379364
    The phytotoxic risk of ambient air pollution to local vegetation was assessed in Selangor State, Malaysia. The AOT40 value was calculated by means of the continuously monitored daily maximum concentration and the local diurnal pattern of O3. Together with minor risks associated with the levels of NO2 and SO2, the study found that the monthly AOT40 values in these peri-urban sites were consistently over 1.0 ppm.h, which is well in exceedance of the given European critical level. Linking the O3 level to actual agricultural crop production in Selangor State also indicated that the extent of yield losses could have ranged from 1.6 to 5.0% (by weight) in 2000. Despite a number of uncertainties, the study showed a simple but useful methodological framework for phytotoxic risk assessment with a limited data set, which could contribute to appropriate policy discussion and countermeasures in countries under similar conditions.
    Matched MeSH terms: Air Movements; Air Pollutants/toxicity; Air Pollution/adverse effects*
  5. Masseran N, Razali AM, Ibrahim K, Latif MT
    Environ Monit Assess, 2016 Jan;188(1):65.
    PMID: 26718946 DOI: 10.1007/s10661-015-5070-9
    The air pollution index (API) is an important figure used for measuring the quality of air in the environment. The API is determined based on the highest average value of individual indices for all the variables which include sulfur dioxide (SO2), nitrogen dioxide (NO2), carbon monoxide (CO), ozone (O3), and suspended particulate matter (PM10) at a particular hour. API values that exceed the limit of 100 units indicate an unhealthy status for the exposed environment. This study investigates the risk of occurrences of API values greater than 100 units for eight urban areas in Peninsular Malaysia for the period of January 2004 to December 2014. An extreme value model, known as the generalized Pareto distribution (GPD), has been fitted to the API values found. Based on the fitted model, return period for describing the occurrences of API exceeding 100 in the different cities has been computed as the indicator of risk. The results obtained indicated that most of the urban areas considered have a very small risk of occurrence of the unhealthy events, except for Kuala Lumpur, Malacca, and Klang. However, among these three cities, it is found that Klang has the highest risk. Based on all the results obtained, the air quality standard in urban areas of Peninsular Malaysia falls within healthy limits to human beings.
    Matched MeSH terms: Air Pollutants/analysis; Air Pollutants/chemistry; Air Pollution/analysis*
  6. Solarin SA, Al-Mulali U, Sahu PK
    Environ Sci Pollut Res Int, 2017 Oct;24(29):23096-23113.
    PMID: 28828733 DOI: 10.1007/s11356-017-9950-0
    The main objective of this study is to investigate the influence of the globalisation (Trans-Pacific Partnership (TPP) agreement in particular) on air pollution in Malaysia. To achieve this goal, the Autoregressive Distributed Lag (ARDL) model, Johansen cointegration test and fully modified ordinary least square (FMOLS) methods are utilised. CO2 emission is used as an indicator of pollution while GDP per capita and urbanisation serve as its other determinants. In addition, this study uses Malaysia's total trade with 10 TPP members as an indicator of globalisation and analyse its effect on CO2 emission in Malaysia. The outcome of this research shows that the variables are cointegrated. Additionally, GDP per capita, urbanisation and trade between Malaysia and its 10 TPP partners have a positive impact on CO2 emissions in general. Based on the outcome of this research, important policy implications are provided for the investigated country.
    Matched MeSH terms: Air Pollution/analysis*
  7. Norfazillah Ab Manan, Rozita Hod, Hanizah Mohd Yusoff, Mazrura Sahani, Rosnah Ismail, Wan Rozita Wan Mahiyuddin
    Int J Public Health Res, 2016;6(1):707-712.
    MyJurnal
    Air pollution has been widely known to have an influence on health of the general population.
    Air pollution can result from natural causes, human activities and transboundary air pollution.
    Weather and climate play crucial role in determining the pattern of air quality. In recent years,
    air pollution and recurrent episodes of haze has become a major concern in Malaysia.
    Surveillance data on concentrations of main air pollutants such as carbon dioxide, (CO2),
    Nitrogen Dioxide (NO2), Ozone (O3), sulphur dioxide (SO2) and particulate matter (PM10)
    were found to be higher during the haze days and this may have an impact on health of the
    community as reflected by an increase in hospital admissions particularly the respiratory and
    cardiovascular diseases.
    Matched MeSH terms: Air Pollutants; Air Pollution
  8. Solarin SA, Al-Mulali U, Gan GGG, Shahbaz M
    Environ Sci Pollut Res Int, 2018 Aug;25(23):22641-22657.
    PMID: 29846898 DOI: 10.1007/s11356-018-2392-5
    The aim of this research is to explore the effect of biomass energy consumption on CO2 emissions in 80 developed and developing countries. To achieve robustness, the system generalised method of moment was used and several control variables were incorporated into the model including real GDP, fossil fuel consumption, hydroelectricity production, urbanisation, population, foreign direct investment, financial development, institutional quality and the Kyoto protocol. Relying on the classification of the World Bank, the countries were categorised to developed and developing countries. We also used a dynamic common correlated effects estimator. The results consistently show that biomass energy as well as fossil fuel consumption generate more CO2 emissions. A closer look at the results show that a 100% increase in biomass consumption (tonnes per capita) will increase CO2 emissions (metric tons per capita) within the range of 2 to 47%. An increase of biomass energy intensity (biomass consumption in tonnes divided by real gross domestic product) of 100% will increase CO2 emissions (metric tons per capita) within the range of 4 to 47%. An increase of fossil fuel consumption (tonnes of oil equivalent per capita) by 100% will increase CO2 emissions (metric tons per capita) within the range of 35 to 55%. The results further show that real GDP urbanisation and population increase CO2 emissions. However, hydroelectricity and institutional quality decrease CO2 emissions. It is further observed that financial development, foreign direct investment and openness decrease CO2 emissions in the developed countries, but the opposite results are found for the developing nations. The results also show that the Kyoto Protocol reduces emission and that Environmental Kuznets Curve exists. Among the policy implications of the foregoing results is the necessity of substituting fossil fuels with other types of renewable energy (such as hydropower) rather than biomass energy for reduction of emission to be achieved.
    Matched MeSH terms: Air Pollution/analysis*
  9. Abdul Aziz FAB, Abd Rahman N, Mohd Ali J
    Comput Intell Neurosci, 2019;2019:6252983.
    PMID: 31239836 DOI: 10.1155/2019/6252983
    Due to the rapid development of economy and society around the world, the most urban city is experiencing tropospheric ozone or commonly known as ground-level air pollutants. The concentration of air pollutants must be identified as an early precaution step by the local environmental or health agencies. This work aims to apply the artificial neural network (ANN) in estimating the ozone concentration forecast in Bangi. It consists of input variables such as temperature, relative humidity, concentration of nitrogen dioxide, time, UVA and UVB rays obtained from routine monitoring, and data recorded. Ten hidden layer is utilized to obtain the optimized ozone concentration, which is the output layer of the ANN framework. The finding showed that the meteorology condition and emission patterns play an important part in influencing the ozone concentration. However, a single network is sufficient enough to estimate the concentration despite any circumstances. Thus, it can be concluded that ANN is able to give reliable and satisfactory estimations of ozone concentration for the following day.
    Matched MeSH terms: Air Pollutants/analysis
  10. Al-Amin AQ, Doberstein B
    Environ Sci Pollut Res Int, 2019 Oct;26(30):31062-31076.
    PMID: 31456153 DOI: 10.1007/s11356-019-06128-4
    Alternative energy policies targeting the adoption of hydrogen fuel cell vehicles (HFCVs) could have significant positive impacts on Malaysia's ability to meet both its carbon reduction goal and its energy security needs. The transport sector generally contributes heavily to carbon emissions, and is also difficult to decarbonize because of the costs associated with many greener options. This study explores the possibility of decarbonizing the Malaysian transport sector by promoting the use of hydrogen vehicles, and analyzes the adoption challenges and economic obstacles (especially public acceptance) associated with introducing HFCVs. This study contends that the adoption challenges of this new technology can be overcome through the use of development strategies outlined. This study also addresses the regulatory framework that Malaysia (and other countries) might use to overcome common policy adoption challenges of HFCVs.
    Matched MeSH terms: Air Pollution/prevention & control
  11. Ang TN, Young BR, Taylor M, Burrell R, Aroua MK, Baroutian S
    Chemosphere, 2020 Jan;239:124839.
    PMID: 31726519 DOI: 10.1016/j.chemosphere.2019.124839
    The inhalational anaesthetic agent - sevoflurane is widely employed for the induction and maintenance of surgical anaesthesia. Sevoflurane possesses a high global warming potential that imposes negative impact to the environment. The only way to resolve the issue is to remove sevoflurane from the medical waste gas before it reaches the atmosphere. A continuous adsorption study with a fixed-bed column was conducted using two commercial granular activated carbons (E-GAC and H-GAC), to selectively remove sevoflurane. The effect of bed depth (Z, 5-15 cm), gas flow rate (Q, 0.5-6.0 L/min) and inlet sevoflurane concentration (C0, ∼55-700 mg/L) was investigated. E-GAC demonstrated ∼60% higher adsorption capacity than H-GAC under the same operating conditions. Varying the levels of Z, Q and C0 showed significant differences in the adsorption capacities of E-GAC, whereas only changing the C0 level had significant differences for H-GAC. Three breakthrough models (Adams-Bohart, Thomas, and Yoon-Nelson) and Bed-depth/service time (BDST) analysis were applied to predict the breakthrough characteristics of the adsorption tests and determine the characteristic parameters of the column. The Yoon-Nelson and Thomas model-predicted breakthrough curves were in good agreement with the experimental values. In the case of the Adams-Bohart model, a low correlation was observed. The predicted breakthrough time (tb) based on kinetic constant (kBDST) in BDST analysis showed satisfactory agreement with the measured values. The results suggest the possibility of designing, scaling up and optimising an adsorption system for removing sevoflurane with the aid of the models and BDST analysis.
    Matched MeSH terms: Air Pollutants/analysis*
  12. Yue X, Ma NL, Sonne C, Guan R, Lam SS, Van Le Q, et al.
    J Hazard Mater, 2021 03 05;405:124138.
    PMID: 33092884 DOI: 10.1016/j.jhazmat.2020.124138
    Indoor air pollution with toxic volatile organic compounds (VOCs) and fine particulate matter (PM2.5) is a threat to human health, causing cancer, leukemia, fetal malformation, and abortion. Therefore, the development of technologies to mitigate indoor air pollution is important to avoid adverse effects. Adsorption and photocatalytic oxidation are the current approaches for the removal of VOCs and PM2.5 with high efficiency. In this review we focus on the recent development of indoor air pollution mitigation materials based on adsorption and photocatalytic decomposition. First, we review on the primary indoor air pollutants including formaldehyde, benzene compounds, PM2.5, flame retardants, and plasticizer: Next, the recent advances in the use of adsorption materials including traditional biochar and MOF (metal-organic frameworks) as the new emerging porous materials for VOCs absorption is reviewed. We review the mechanism for mitigation of VOCs using biochar (noncarbonized organic matter partition and adsorption) and MOF together with parameters that affect indoor air pollution removal efficiency based on current mitigation approaches including the mitigation of VOCs using photocatalytic oxidation. Finally, we bring forward perspectives and directions for the development of indoor air mitigation technologies.
    Matched MeSH terms: Air Pollutants; Air Pollution, Indoor
  13. Abdullah Mohd Noh, Nordin Ayoub, Siti Zurina Mat Noor, Norhafizah Zahari, Mardhiyati Mohd Yunus
    MyJurnal
    Radon exists naturally in the air. It can accumulate inside the buildings which may affect the indoor air quality. Radon is a radioactive gas that produces alpha particles during decay time. The alpha particles might cause harm to the human lungs and stomach. Inhalation of radon is one of the causes of lung cancer disease. Samples of inhaled radon in different rooms at the workplace were taken hourly through a passive diffusion chamber. The detection method was done using Alpha Spectrometry. The short term measurement was applied in the study to monitor the average weekly radon reading in different rooms in the Medical Imaging Laboratory of the University of Selangor (UNISEL). All tested rooms showed the existence of radon gas with different concentrations. Some of them showed the maximum reading of radon concentration which was higher than the radon action level of 148Bq/m3 or 4pCi/l. Their weekly average of radon concentration is contributing almost 50% of the accumulated radon concentration in the laboratory. It is highly recommended that monitoring the concentration of radon in indoor air is performed to ensure it is at a safe and healthy level.
    Matched MeSH terms: Air Pollutants, Radioactive; Air Pollution, Indoor
  14. Wong SF, Yap PS, Mak JW, Chan WLE, Khor GL, Ambu S, et al.
    Environ Health, 2020 04 03;19(1):37.
    PMID: 32245482 DOI: 10.1186/s12940-020-00579-w
    BACKGROUND: Malaysia has the highest rate of diabetes mellitus (DM) in the Southeast Asian region, and has ongoing air pollution and periodic haze exposure.

    METHODS: Diabetes data were derived from the Malaysian National Health and Morbidity Surveys conducted in 2006, 2011 and 2015. The air pollution data (NOx, NO2, SO2, O3 and PM10) were obtained from the Department of Environment Malaysia. Using multiple logistic and linear regression models, the association between long-term exposure to these pollutants and prevalence of diabetes among Malaysian adults was evaluated.

    RESULTS: The PM10 concentration decreased from 2006 to 2014, followed by an increase in 2015. Levels of NOx decreased while O3 increased annually. The air pollutant levels based on individual modelled air pollution exposure as measured by the nearest monitoring station were higher than the annual averages of the five pollutants present in the ambient air. The prevalence of overall diabetes increased from 11.4% in 2006 to 21.2% in 2015. The prevalence of known diabetes, underdiagnosed diabetes, overweight and obesity also increased over these years. There were significant positive effect estimates of known diabetes at 1.125 (95% CI, 1.042, 1.213) for PM10, 1.553 (95% CI, 1.328, 1.816) for O3, 1.271 (95% CI, 1.088, 1.486) for SO2, 1.124 (95% CI, 1.048, 1.207) for NO2, and 1.087 (95% CI, 1.024, 1.153) for NOx for NHMS 2006. The adjusted annual average levels of PM10 [1.187 (95% CI, 1.088, 1.294)], O3 [1.701 (95% CI, 1.387, 2.086)], NO2 [1.120 (95% CI, 1.026, 1.222)] and NOx [1.110 (95% CI, 1.028, 1.199)] increased significantly from NHMS 2006 to NHMS 2011 for overall diabetes. This was followed by a significant decreasing trend from NHMS 2011 to 2015 [0.911 for NO2, and 0.910 for NOx].

    CONCLUSION: The findings of this study suggest that long-term exposure to O3 is an important associated factor of underdiagnosed DM risk in Malaysia. PM10, NO2 and NOx may have mixed effect estimates towards the risk of DM, and their roles should be further investigated with other interaction models. Policy and intervention measures should be taken to reduce air pollution in Malaysia.

    Matched MeSH terms: Air Pollutants; Air Pollution
  15. Shakil MH, Munim ZH, Tasnia M, Sarowar S
    Sci Total Environ, 2020 Nov 25;745:141022.
    PMID: 32711074 DOI: 10.1016/j.scitotenv.2020.141022
    The current Coronavirus infection (COVID-19) outbreak has had a substantial impact on many aspects of general life. Although a number of studies have been published on the topic already, there has not been a critical review of studies on the impacts of COVID-19 by and on environmental factors. The current study fills this gap by presenting a critical analysis of 57 studies on the nexus between COVID-19 and the environment, published in nine journals up to May 2020. Majority of the studies in our sample are published in Science of the Total Environment (74%), and studies used mostly descriptive statistics and regression as research methods. We identified four underlying research clusters based on a systematic content analysis of the studies. The clusters are: (1) COVID-19 and environmental degradation, (2) COVID-19 and air pollution, (3) COVID-19 and climate/metrological factors and (4) COVID-19 and temperature. Besides a critical analysis of the studies in each cluster, we propose research questions to guide future research on the relationship between COVID-19 and the environment.
    Matched MeSH terms: Air Pollution*
  16. Sanusi MSM, Ramli AT, Hashim S, Lee MH
    Ecotoxicol Environ Saf, 2021 Jan 15;208:111727.
    PMID: 33396058 DOI: 10.1016/j.ecoenv.2020.111727
    Continuous depletion in tin productions has led to a newly emerging industry that is a tin by-product (amang) processing industry to harness mega tons of tin by-products produced in the past. Amang composed of profitable multi-heavy minerals and rare-earth elements. With poorly established safety and health practices in operating plant, amang poses extremely high radioactivity problem associated with high occupational ionizing radiation exposures to workers and continuously impacting the local environment with radioactive contamination from industrial effluent and solid waste into lithosphere and water bodies. The radioactivity level of 238U and 232Th series in the mineral varies from few hundreds up to ~200,000 and ~400,000 Bq kg-1 respectively and are potential to yield more than ~ 30,000 nGy h-1 of gamma (γ) radiation exposure to plant workers. The study found out that for 8 h of work time, a worker is estimated to receive an average effective dose of 0.1 mSv per day from external γ radiation source with a maximum up to 2 mSv per day for extreme exposure situation. Interferences of different exposure routes for examples inhalation of equivalent equilibrium concentration (ECC) of 222Rn and 220Rn progenies and airborne long-lived α particles from the dusty working environment could pose a higher total effective dose as much as 5 mSv per day and 115 mSv per year. The value is 5 times higher than the annual dose limit for designated radiation worker (20 mSv) in Peninsular Malaysia. The study found that 41% of the total received an effective dose received by a worker is contributed by 222Rn, 32% of airborne particulates and dust, 23% from external γ exposure and 4% from 220Rn. Based on radioecological risk assessment, the study found out that the aquatic environment is the highly exposed group to ionizing radiation from industrial effluent discharge and sand residues. With the impotent establishment of radiation protection in the industry, plus the country newly introduced long-term plan to revive tin mining as well as its accessory amang mineral, it is necessary for the government to harmonize current regulation to improve the worker safety and health as well as sustaining local environment.
    Matched MeSH terms: Air Pollutants, Radioactive/analysis*
  17. Ravindran J, Parampalam SD
    Med J Malaysia, 2000 Jun;55(2):280-2.
    PMID: 19839163
    The obstetric flying squad has been used in obstetric practice since 1933 to manage obstetric emergencies occurring in domicilliary practice. It has often been criticised in such situations as only delaying effective treatment to the patient. We have introduced the obstetric flying squad in an urban setting to cater for obstetric emergencies occurring in private practice. This service has been used on ten occasions since its inception without any maternal deaths being recorded or any delay in the provision of emergency care. The flying squad has led to closer cooperation between the government and private sectors in providing obstetric care.
    Matched MeSH terms: Air Ambulances*
  18. Hu SJ, Katagiri H, Kobayashi H
    Health Phys, 1995 Jan;68(1):67-70.
    PMID: 7989197
    When the definition of calm in atmospheric diffusion analyses is changed from 0.5 m s-1 to 0.1 m s-1, actual and more accurate low wind speeds and wind directions can be used to calculate the average air concentrations due to continuous releases of radionuclides at 10-m stack height more realistically and accurately. However, this modified calm condition has little affect on the calculated adult thyroid exposure for a postulated accident.
    Matched MeSH terms: Air Pollutants, Radioactive/analysis*
  19. Flaherty G, Sabir K
    Travel Med Infect Dis, 2016 Sep-Oct;14(5):531-532.
    PMID: 27524682 DOI: 10.1016/j.tmaid.2016.08.001
    Matched MeSH terms: Air Travel*
  20. Puad HA, Noor MY
    J Environ Radioact, 2004;73(3):289-305.
    PMID: 15050361
    Crude oil terminal sludge contains technologically enhanced naturally occurring radionuclides such as (232)Th, (238)U, (228)Ra and (226)Ra, thus cannot be disposed of freely without proper control. The current method of disposal, such as land farming and storing in plastic drums is not recommended because it will have a long-term impact on the environment. Due to its organic nature, there is a move to treat this sludge by thermal methods such as incineration. This study has been carried out to determine the behaviors of (232)Th, (238)U, (228)Ra and (226)Ra present in the sludge during combustion at a certain temperature and time. The percentage of volatilization was found to vary between 2% and 70%, (238)U was the most volatile in comparison with (232)Th, (228)Ra and (226)Ra. (238)U is found to be significantly volatilized above 500 degrees C, and might reach maximum volatilization at above 700 degrees C. A mathematical model was developed to predict the percentage of volatilization of (232)Th, (238)U, (228)Ra and (226)Ra contained in the sludge. With this known percentage of volatilization, the concentration of (232)Th, (238)U, (228)Ra and (226)Ra present in the bottom and filter ashes can be calculated.
    Matched MeSH terms: Air Pollutants, Radioactive/analysis*
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links