The fatty acid composition and trans fatty acids (TFA) contents of samples of five Malaysian cream crackers biscuit brands were determined by gas-liquid chromatography, using a 60 m Supelco SP2340 fused silica capillary column and flame ionization detection. The identities of the fatty acids were established by comparing their retention times with authentic standards from Supelco. The results were expressed as relative percentages. The total saturated fatty acids (SFA) in the samples ranged from 48.90% to 54.87% of total fatty acids. As for the polyunsaturated fatty acids (PUFA), the total PUFA in the samples ranged from 9.97% to 11.73% of total fatty acids. Total trans fatty acids (TFA) ranged from 0.17% to 0.77% of total fatty acids. The monotrans 18:2 tc or 18:2 ct isomer content ranged from 0.07% to 0.10% of total fatty acids and the ditrans 18:2 isomer (9t, 12t) was not detected. The results indicate that all the fat sources of the 5 sample crackers biscuit brands were palm oil based.
The rate of aqueous cleavage of N-(2’-hydroxyphenyl)phthalimide (A), monitored at 320 nm, 1.0 10–3 M NaOH, 35ºC and within CH3CN content range 1% – 80% v/v in mixed aqueous solvents, follows the reaction scheme: A + HO-/H2O ➝ B + HO-/H2O ➝ P1 + P2 where B, P1 and P2 represent N-(2’-hydroxyphenyl)phthalamic acid, phthalic acid and 2-hydroxyaniline, respectively. The values of k1 and k2 at different content of CH3CN have been calculated from a kinetic equation based upon a reaction scheme with two irreversible pseudo-first-order consecutive reaction paths. The values of k1/k2 are > 104 within CH3CN content range 1% – 80% v/v in mixed aqueous solvents. The intermediate hydrolysis product (B) exists in 72% dianionic, 27.9% monoanionic and 0.1% nonionic form under the present experimental conditions. Both dianionic and monoanionic forms of B are non-reactive while the nonionic form of B is reactive towards hydrolysis under such conditions.
The antibacterial activity of solvent-extracted oil of noni (Morinda citrifolia L.), spinach (Spinacia oleracea L.), lady’s finger (Abelmoschus esculentus (L.) Moench), bitter gourd (Momordica charantia Linn.), and mustard (Brassica nigra L.) seed oils, and coconut (Cocos nucifera L.) oil, palm (Elaeis guineensis L.) mesocarp in hydrolyzed and unhydrolyzed form were determined in order to explore their potential usage as antibacterial agent. The hydrolysis process that was catalyzed by immobilized lipase of Rhizomucor miehei (RMIM) showed highest hydrolytic activity with 1.0 ml of added water volume except bitter gourd seed oil and palm mesocarp oil which has maximum hydrolytic activity with added water volume of 5 ml and 2.5 ml respectively. Before hydrolysis, all oil samples did not show inhibition ring zones (IRZ) on any of the tested bacteria strains (Salmonella typhimurium, Listeria monocytogenes and Escherichia coli O157:H7). Hydrolyzed lady’s finger and bitter gourd seed oil showed IRZ on all tested bacteria strains; hydrolyzed mustard seed oil on S. typhimurium and L. monocytogenes; hydrolyzed spinach seed oil and coconut oil on L. monocytogenes; hydrolyzed noni seed oil and palm mesocarp oil did not exhibit IRZ on any of the tested bacteria strains. Most of the hydrolyzed oil exhibit an inhibition activity that was different from their respective dominant fatty acids except noni seed oil and palm mesocarp oil.
The rate of formation and disappearance of phthalic anhydride (PAn) intermediate in the aqueous cleavage of N-methoxyphthalamic acid (NMPA) under acidic pH was studied spectrophotometrically in mixed CH3CN-H2O solvents. The rate of formation of PAn from NMPA is almost independent of the change in acetonitrile content from 20 to 70% v/v in mixed aqueous solvents. The rate constants for the formation of PAn from NMPA are approximately 10-fold smaller than the corresponding rate constants for the formation of PAn from o-carboxybenzohydroxamic acid (OCBA). These observations are ascribed to the consequence of the occurrence of slightly different mechanisms in these reactions.
The remote groups in N-heterocyclic carbene (NHC) ligands have a significant influence on metal-catalyzed reactions. We examine how remote bulkiness, electronic groups, and expanded-ring NHCs (ER-NHCs) influence alkene reactivity and regioselectivity toward hydrocupration using density functional theory calculations. The impact of remote steric bulkiness on the Cu-H insertion rate is analyzed, revealing a strong correlation between the steric substituent constant and rate ratio, where a bulky group increases the rate due to reduced steric effects in the transition state (TS). The steric properties of the examined catalysts (with a remote group R2 = CPh3, CHPh2, CH2Ph, CH3, and H) and their corresponding TSs are found to be modulated greatly by the remote steric substitution group and the ring size of the NHC ligand. Enhanced bulkiness enhances the nucleophilic Cu-H moiety. The remote electronic groups have a smaller impact on insertion barrier compared to that of steric hindrance. Furthermore, ER-NHC exploration indicates that NHCs with over five-membered rings have a significantly negative influence on the reaction rate. Finally, with a highly bulky group (R2 = CPh3), anti-Markovnikov insertion preference is attributed to high interaction energy and improved steric properties. Overall, our findings here provide valuable insights for the development of a more effective catalyst in metal-catalyzed reactions.
deep venous thrombosis (dVT) in lower limbs caused by abdominal aortic aneurysm (AAA) is rare. A combination of anatomical obstruction with surrounding inflammatory tissue and reduced blood flow in venous limb were probably the main reasons for the occurrence of the dVT. we report a case of infra-renal AAA presented as lower limb dVT and symptomatic pulmonary embolism.
A study was undertaken to determine the effect of polyethylene and polystyrene used in the manufacture of plastic items on colour perception. Colour vision was assessed using the Ishihara plates, panel 015 test and the Farnsworth Munsell 100-Hue test. Two factories were chosen at random. One factory (referred here as factory A) used virgin resin in pellet form (polyethylene) in the manufacturing of plastic containers to store consumer edible oil. The other factory (referred as factory B) used polystyrene to make plastic bags. A total of 39 healthy employees from factory A (mean age 26.4 :t 8.2 years) and 40 healthy employees from factory B (mean age 26.8 :t 9.6 years) were recruited in this study. A control group of 27 normal healthy subjects (mean age 27.4 :t 4.3 years) who were employees of UKM with no occupational involvement with petroleum derivatives were also recruited in this study and they performed the same colour vision tests. All subjects passed the Ishihara plates test showing that none of the subjects (employees of factory A and B, and control subjects) had a congenital red-green defect. All control subjects passed all of the colour vision tests whilst some employees of factories A and B failed the 015 and FM100 Hue tests. For employees from factory A results from the 015 test showed that 7 (17.9%) had a tritan (blue-yellow) type of defect and 1 (2.6%) had a complex type of defect. The FM 100 Hue results of factory A employees showed that 51.3% (n=20) had a complex type of defect. Total error scores (TES) calculated from the FM 100 Hue test revealed that employees from factory A had a statistically significant higher mean TES of 65.13:!: 48.31 compared to that of control subjects with a mean TES of 31.26:!: 14.93. For employees in factory B, 10 employees (25.0%) had a tritan (blue-yellow) type of defect and 2 (5.0%) had a complex type of defect. Results of the FM 100 Hue test showed that 4 employees (1.0%) had a tritan type of defect whereas 22 (55.0%) had a complex type of defect. Mean total error scores (TES) calculated from the FM 100 Hue test revealed that employees from factory B had a statistically significant higher mean TES of 71.54 :t 54.63 compared with that of control subjects with a mean TES of 31.26 :t. 14.93
The above results show that employees of the plastic factories studies are associated with a higher risk of acquiring colour vision defects as compared to normal subjects who are not engaged in the plastic manufacturing industry. This may have an implication towards the future retinal health of employees in petrod1emical-based industries.
The values of pseudo-first-order rate constants (k(obs)) for alkaline hydrolysis of 1, obtained at 1.0 mM NaOH and within [C(m)E(n)]T (total concentration of C(m)E(n)) range of 3.0-5.0 mM for C(12)E(23) and 10-20 mM for C(18)E(20), fail to obey pseudophase micellar (PM) model. The values of the fraction of near irreversible C m E n micellar trapped 1 molecules (F(IT1)) vary in the range ~0-0.75 for C(12)E(23) and ~0-0.83 for C(18)E(20) under such conditions. The values of F(IT1) become 1.0 at ≥ 10 mM C(12)E(23) and 50 mM C(18)E(20). Kinetic analysis of the observed data at ≥ 10 mM C(12)E(23) shows near irreversible micellar entrapment of 1 molecules under such conditions.
Eleven new 2,6-di-tert-butyl-4-(5-aryl-1,3,4-oxadiazol-2-yl)phenols 5a-k were synthesized by reacting aryl hydrazides with 3,5-di-tert butyl 4-hydroxybenzoic acid in the presence of phosphorus oxychloride. The resulting compounds were characterized based on their IR, ¹H-NMR, ¹³C-NMR, and HRMS data. 2,2-Diphenyl-1-picrylhydrazide (DPPH) and ferric reducing antioxidant power (FRAP) assays were used to test the antioxidant properties of the compounds. Compounds 5f and 5j exhibited significant free-radical scavenging ability in both assays.
This is our initial report on the first 4 cases of infra-renal abdominal aortic aneurysms undergoing Endovascular Aneurysm Repair (EVAR) with local anaesthesia, controlled sedation and monitoring by an anaesthetist. All 4 patients were males with a mean age of 66.7 years. Only one (1) required ICU stay of 2 days for cardiac monitoring due to bradycardia and transient hypotension post procedure. No mortality or major post operative morbidity was recorded and the mean hospital stay post procedure was 3.5 days (range 2-5 days).
The title amine, C(24)H(33)NO(3), has two substituted aromatic rings at either end of the -CH(2)NH- linkage [C(ar-yl)-CH(2)-NH-C(ar-yl) torsion angle = 77.4 (3)°]. The amino and hy-droxy groups are hydrogen-bond donors to the carbonyl O atom of an adjacent mol-ecule. These hydrogen bonds give rise to a chain that runs along the b axis. One of the tert-butyl groups is disordered over two positions with a site-occupation factor of 0.834 (6) for the major occupied site.
The title compound, a Schiff base, C(24)H(31)NO(3), has a substituted aromatic ring at both ends of the azomethine linkage and these make a dihedral angle of 24.9 (1)°. There is an intra-molecular hydrogen bond between the hy-droxy group (donor) and the N atom of themazomethine linkage.
The title compound, C(20)H(32)N(2)O(2)S, the condensation product of a thio-acetohydrazine and acetone, has a two-coordinate S atom and the angle at this atom is 100.7 (1)°. The (CH(3))C=N-NH-C(O)- substituent engages in N-H⋯O hydrogen-bonding inter-actions with the substituent of an adjacent mol-ecule across a center of inversion, generating a dimeric structure.
The rate of conversion of 1 to N-(2-methoxyphenyl)phthalimide (2) within [HCl] range 5.0x10(-3)-1.0 M at 1.0M ionic strength (by NaCl) reveals the presence of both uncatalyzed and specific acid-catalyzed kinetic terms in the rate law. Intramolecular carboxamide group-assisted cleavage of amide bond of 1 reveals rate enhancement of much larger than 10(6)-fold compared to the expected rate of analogous intermolecular reaction.
The asymmetric unit of the title compound, C(22)H(28)N(2)O(3)·CH(4)O, consists of two independent Schiff base mol-ecules and two independent methanol solvent mol-ecules. In one Schiff base mol-ecule, the 2-hydr-oxy group forms an intra-molecular hydrogen bond with the amide O atom, whereas in the other Schiff base mol-ecule, the 2-hydr-oxy-substituted benzene ring is oriented so that the 2-hydr-oxy group serves as hydrogen-bond acceptor for the amide NH group. In the crystal structure, Schiff base mol-ecules inter-act with methanol solvent to furnish a hydrogen-bonded chain.
Pseudo-first-order rate constants (k(obs)) for alkaline hydrolysis of N-benzylphthalimide (1) show a nonlinear decrease with the increase in [C(m)E(n)]T (total concentration of Brij 58, m = 16, n = 20 and Brij 56, m = 16, n = 10) at constant [CH(3)CN] and [NaOH]. These nonionic micellar effects, within the certain typical reaction conditions, have been explained in terms of the pseudophase micellar (PM) model. The values of micellar binding constants (KS) of 1 are 1.04 x 10(3) M(-1) (at 1.0 x 10(-3) M NaOH) and 1.08 x 10(3) M(-1) (at 2.0 x 10(-3) M NaOH) for C(16)E(20) as well as 600 M(-1) (at 7.6 x 10(-4) M NaOH) and 670 M(-1) (at 1.0 x 10(-3) M NaOH) for C(16)E(10) micelles. The pseudo-first-order rate constants (kM) for hydrolysis of 1 in C(16)E(20) micellar pseudophase are approximately 90-fold smaller than those (kW) in water phase. The values of kM for hydrolysis of 1 in C(16)E(10) micelles are almost zero. Kinetic coupled with UV spectral data reveals significant irreversible nonionic micellar binding of 1 molecules in the micellar environment of nearly zero hydroxide ion concentration at >or=0.14 M C(16)E(20) and 1.0 x 10(-3) M NaOH while such observations could not be detected at or=3 x 10(-3) M C(16)E(10) and 7.6 x 10(-4) M NaOH, while the rate of hydrolysis of 1 is completely ceased at >or=0.05 M C(16)E(10) and 7.6 x 10(-4) M NaOH. The rate of hydrolysis of 1 at 5.0 x 10(-2) and 8.8 x 10(-2) M C(16)E(10) and 1.0 x 10(-3) M NaOH reveals the formation of presumably phthalic anhydride, whereas such observation was not observed in the C(16)E(20) micellar system under similar experimental conditions.
In the planar title mol-ecule, C(16)H(16)N(2)O(4)·C(2)H(6)O, the planar Schiff base molecule is linked to the ethanol solvent mol-ecule by a hydr-oxy-amide hydrogen bond. The hydr-oxy group of the ethanol mol-ecule is a hydrogen-bond donor to the double-bonded N atom of an adjacent Sciff base, pairs of interactions taking place across a center of symmetry and giving rise to a hydrogen-bonded dimer.
In the title compound, C(17)H(15)N(3)O(2)·C(2)H(6)O, Schiff base molecules are linked by a hydr-oxy-amido hydrogen bond into a helical chain running along the b axis. This chain is consolidated by two other hydrogen bonds; the ethanol solvent mol-ecule is a hydrogen-bond donor to the amide group and a hydrogen-bond acceptor for the indolyl NH group of an adjacent Schiff base mol-ecule.
N-Isobutyl-phthalimic acid hydrolyzes to the title salt, 2C(4)H(12)N(+)·C(8)H(4)O(4) (-)·H(2)O, which adopts a hydrogen-bonded layer structure. In the anion, the carboxyl-ate groups are twisted with respect to the benzene ring [dihedral angles = 43.8 (1) and 50.9 (1)°].