A semi empirical kinetic (SEK) method has been used to determine the ratio of cetyltrimethylammonium bromide (CTABr) micellar binding constants of counterion X⁻ and Br⁻ (a reference counterion), i.e. K(X)/K(Br) (=R(X)(Br)). The values of K(X) and K(Br) have been derived from the kinetic parameters obtained in the presence spherical/non-spherical and spherical micelles, respectively. This rather new method gives the respective mean values of R(X)(Br) as 45±2, 25±3, 4.7±0.6 and 119±10 for X=2,4-, 2,5-, 2,6- and 3,4-Cl₂C₆H₃CO₂⁻ (Cl₂Bz'Na). Literature lacks the report on the values of R(X)(Br) for all X except for X=2,6-Cl₂C₆H₃CO₂⁻ (2,6-Cl2Bz'⁻) for which the reported value is 5.0. Rheological properties, such as shear thinning behavior, reveal indirectly the presence of wormlike micelles (WM) in the CTABr micellar solutions containing MX for all X except X=2,6-Cl₂Bz'⁻. The micelles remain spherical within [2,6-Cl₂Bz'⁻] range 0.01-0.34 M at 0.015 M CTABr. The maxima of the plots of zero shear viscosity, η₀, (obtained from the initial plateau region of flow curves, i.e. η vs. γ curve) vs. [MX] (MX=2,4-, 2,5- and 3,4-Cl₂Bz'Na) at 0.015 M CTABr also support indirectly the presence of linear, entangled and branched WM.
The aim was to assess the influence of two irrigation regimens having ethylenediaminetetraacetic acid (EDTA) and ethylenediaminetetraacetic acid with cetrimide (EDTAC) as final irrigants, respectively, on the dentine wettability for AH Plus sealer by comparing its contact angle formed to the irrigated dentine.
A new method, based upon semi-empirical kinetic approach, for the determination of ion exchange constant for ion exchange processes occurring between counterions at the cationic micellar surface is described in this review article. Basically, the method involves a reaction kinetic probe which gives observed pseudo-first-order rate constants (k(obs)) for a nucleophilic substitution reaction between the nonionic and anionic reactants (R and S) in the presence of a constant concentration of both reactants as well as cationic micelles and varying concentrations of an inert inorganic or organic salt (MX). The observed data (k(obs), versus [MX]) fit satisfactorily (in terms of residual errors) to an empirical equation which could be derived from an equation explaining the mechanism of the reaction of the kinetic probe in terms of pseudophase micellar (PM) model coupled with another empirical equation. This (another) empirical equation explains the effect of [MX] on cationic micellar binding constant (K(S)) of the anionic reactant (say S) and gives an empirical constant, K(X/S). The magnitude of K(X/S) is the measure of the ability of X(-) to expel S(-) from a cationic micellar pseudophase to the bulk aqueous phase through ion exchange X(-)/S(-). The values of K(X/S) and K(Y/S) (where Y(-) is another inert counterion) give the ion exchange constant, K(X)(Y) (=K(X)/K(Y) where K(X) and K(Y) represent cationic micellar binding constants of X(-) and Y(-), respectively). The suitability of this method is demonstrated by the use of three different reaction kinetic probes and various MX.
The values of the relative counterion (X) binding constant R(X)(Br) (=K(X)/K(Br), where K(X) and K(Br) represent cetyltrimethylammonium bromide, CTABr, micellar binding constants of X(v-) (in non-spherical micelles), v = 1,2, and Br(-) (in spherical micelles)) are 58, 68, 127, and 125 for X(v-) = 1(-), 1(2-), 2(-), and 2(2-), respectively. The values of 15 mM CTABr/[Na(v)X] nanoparticles-catalyzed apparent second-order rate constants for piperidinolysis of ionized phenyl salicylate at 35 °C are 0.417, 0.488, 0.926, and 0.891 M(-1) s(-1) for Na(v)X = Na1, Na2 1, Na2, and Na2 2, respectively. Almost entire catalytic effect of nanoparticles catalyst is due to the ability of nonreactive counterions, X(v-), to expel reactive counterions, 3(-), from nanoparticles to the bulk water phase.
Catanionic system using anionic sodium bis-(2ethylhexyl)sulfosuccinate (Am) and cationic cetyltrimethylammonium bromide (cTAB) is studied. The system is prepared by addition of CTAB solution to a prepared AOT solution until slight anionic-rich catanionic phase is produced. Catanionic system consists of the mixture of different types of surfactants and counterion due to electrostatic interaction between the oppositely charged surfactant. Both of these products affect the in surface activity of the surfactant. Hydrodynamic diameters decrease and clearer solution were seen with the increase of CTAB concentration in solution mixture. As a result, mixed surfactant with larger hydrophobic region and the presence of counterion will induce smaller vesicle to form in catanionic system.
Micellar properties of binary mixed surfactants of a surface active mixed copper(II) chelate, [Cu(C12-tmed)(acac)Cl] (where C12-tmed is N,N,N'-trimethyl-N'-dodecylethylenediamine) with three common surfactants, viz. sodium dodecyl sulfate (SDS), cetyltrimethylammonium bromide (CTAB), and octaethylene glycol monododecyl ether (C12E8), were investigated by surface tensiometry, ESR, and UV-visible absorption techniques. The surface tension data were treated with Rubingh's method for mixed micelle formation and Rosen's method for mixed monolayer formation at the aqueous solution/air interface. It was found that in the mixed micelle there is strong attractive interaction between cationic copper surfactant and anonic dodecyl sulfate while there is almost ideal mixing between copper surfactant and CTAB and C12E8. From the ESR and UV-visible studies, a mixed block-type arrangement of head groups is proposed. Copyright 1997 Academic Press. Copyright 1997Academic Press
We found that the gold nanoparticles with high-density and crystalline-shape, such as nanocubes, nanobricks, pentahedral nanorods, etc., can be realized on the surface by using a seed-mediated growth method with a unique seeding process, namely alcohothermal. By using a conventional growth solution that contains HAuCl4, cetyltrimethylammonium bromide, NaOH and ascorbic acid, gold nanoparticles with crystalline-morphology (gold nanocrystals) of yield up to ca. 95%, can be prepared. An alcohothermal seeding was carried out by a thermal reduction of gold ions from an alcoholic solution of gold salt on the surface through an annealing process at a moderate temperature, namely 250 degrees C. It is believed that the unique initial characteristic (presumably the structures) of the gold nanoseeds particles as the result of peculiar nanoseeds formation process, prepared using this approach, instead of a simple thermal restructuring of the as prepared nanoseeds as confirmed by the results of annealing treatment on the nanoseed prepared using the normal and in-situ reduction seeding, was as the driving factor for the projected growth of crystalline-shape gold nanoparticles on the surface. The crystalline-shape gold nanoparticles modified-surface should find a potential application in catalysis, sensors and SERS.
Stevia rebaudiana, a perennial herb native to northeastern Paraguay, has gained immense attention globally over the recent decades due to the natural sweetness of its leaves. Like in most plants, this particular species contains high amount of secondary metabolites, thus rendering the isolation of high quality and quantity RNA extract for molecular applications rather challenging. An effective, high-yield and high-quality RNA isolation protocol for this economically important plant species was devised here based on the cetyltrimethylammonium bromide (CTAB) extraction method, with an additional genomic DNA (gDNA) removal step. DNA and other contaminants that may affect downstream applications were effectively removed. Our results exhibited that RNA samples isolated from the leaves and stems of Stevia rebaudiana using this improvised method are high in integrity and quality with RNA integrity number (RIN) of more than 8 and low in contaminants.
The efficiency of cetyltrimethylammonium bromide (CTAB) to reduce the activity of consortium bacteria consisting of
sulphate-reducing bacteria (C-SRB) has been investigated on variable concentration by weight loss test, potentiodynamic
polarization and diffusion disk methods. C-SRB was isolated from tropical crude oil of Malaysian offshore. Biofilm analysis
was also evaluated by variable pressure scanning electron microscopy (VPSEM). Weight loss and potentiodynamic
polarization analyses showed that CTAB is able to inhibit the biocorrosion process and their inhibition efficiency had
reached to 85 and 65% at 300 ppm CTAB, respectively. Increasing of CTAB efficiency as a function of concentration was
also supported by diffusion disk analysis. Biofilm analysis showed that less of C-SRB and their metabolic by-product had
been observed. It was concluded that CTAB was able to reduce the C-SRB activity and prevent biocorrosion process on
carbon steel surface.
ZnO nanostructures were synthesized by hydrothermal method using different molar ratios of cetyltrimethylammonium bromide (CTAB) and Sodium dodecyl sulfate (SDS) as structure directing agents. The effect of surfactants on the morphology of the ZnO crystals was investigated by field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) techniques. The results indicate that the mixture of cationic-anionic surfactants can significantly modify the shape and size of ZnO particles. Various structures such as flakes, sheets, rods, spheres, flowers and triangular-like particles sized from micro to nano were obtained. In order to examine the possible changes in other properties of ZnO, characterizations like powder X-ray diffraction (PXRD), thermogravimetric and differential thermogravimetric analysis (TGA-DTG), FTIR, surface area and porosity and UV-visible spectroscopy analysis were also studied and discussed.
In the present study, the construction of arrays on silicon for naked-eye detection of DNA dengue was demonstrated. The array was created by exposing a polyethylene glycol (PEG) silane monolayer to 254 nm ultraviolet (UV) light through a photomask. Formation of the PEG silane monolayer and photomodifed surface properties was thoroughly characterized by using atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), and contact angle measurements. The results of XPS confirmed that irradiation of ultraviolet (UV) light generates an aldehyde functional group that offers conjugation sites of amino DNA probe for detection of a specific dengue virus target DNA. Employing a gold enhancement process after inducing the electrostatic interaction between positively charged gold nanoparticles and the negatively charged target DNA hybridized to the DNA capture probe allowed to visualize the array with naked eye. The developed arrays demonstrated excellent performance in diagnosis of dengue with a detection limit as low as 10 pM. The selectivity of DNA arrays was also examined using a single base mismatch and noncomplementary target DNA.
The present study describes the conductometric and spectroscopic study of the interaction of reactive anionic dyes, namely, reactive red 223 and reactive orange 122 with the cationic surfactant cetyltrimethyl ammonium bromide (CTAB). In a systematic investigation, the electrical conductivity data was used to calculate various thermodynamic parameters such as free energy (ΔG), enthalpy (ΔH), and the entropy (ΔS) of solubilization. The trend of change in these thermodynamic quantities indicates toward the entropy driven solubilization process. Moreover, the results from spectroscopic data reveal high degree of solubilization, with strong interactions observed in the cases of both dyes and the CTAB. The spontaneous nature of solubilization and binding was evident from the observed negative values of free energies (ΔG p and ΔG b).
Haruan has been proved to influence the different phases of wound healing process. The current research focuses on the effects of haruan on the different constituents of extracellular matrix of healing wounds in normal and diabetic rats. Anaesthetized normal and streptozotocin induced diabetic rats were provided with excision wounds at the back and then animals were divided into four groups as: group 1, wounds treated with cetrimide+haruan cream; group 2, wounds treated with haruan cream; group 3, wounds treated with cetrimide (commercial) cream; and group 4, wounds untreated and served as control. Animals were sacrificed after 3, 6, 9 and 12 days. These wounds were used to determine the hexosamine, protein, uronic acid and glycosaminoglycan contents and the wound contraction. The results suggested a marked increase (P<0.05) in the uronic acid, hexosamine and dermatan sulfate contents on day 3 of group 1 when compared with groups 2-4. Wound contraction of group 1 was also markedly enhanced of group 1 (P<0.01) when compared with groups 2- 4. On the basis of these results, we conclude that haruan enhances the synthesis of different glycosaminoglycans in healing wounds, which are the first component of extracellular matrix to be synthesized during the wound healing process. The enhanced levels of glycosaminoglycans may help in the formation of a resistant scar and enhanced wound contraction represents the positive influence of haruan on the fibroplastic phase of wound healing.
Bromelain is one of the vegetal proteases found in pineapple plant. It has numerous applications in food and pharmaceuticals. This review discussed different bromelain purification techniques which will assist in determining the effect of processing conditions on the purification efficacy. There are four purification techniques to be discussed, namely; reverse micellar system, aqueous two phase extraction, cation exchange chromatography and ammonium sulphate precipitation. Of the four techniques, cation exchange chromatography had shown the best bromelain purification technique with purification fold of 10.0 followed by reverse micellar system containing CTAB/ isooctane/ hexanol/ butanol, ATPE containing PEG polymer, ammonium sulphate precipitation and ATPE containing PEO-PPO-PEO with purification fold of 5.2, 4.0, 2.81 and 1.25, respectively.
Plant tissues, especially durian tissues contain high content of polysaccharides, polyphenols and other secondary metabolites which can co-precipitate with RNA causing problem in further transcriptomic study. In this experiment, three basic chaotic agents, CTAB, SDS and guanidine are used in three basic protocols for RNA isolation. The effectiveness of each method was determined by spectrophotometer, denaturing agarose gels analysis and northern blot hybridization. CTAB combining with additional sodium acetate precipitation step showed highest yield and best quality of isolated RNA which was free from contaminations of polysaccharides, polyphenols and other secondary metabolites. Furthermore, the total RNA from 4-month old durian flesh of clone D24 was successfully used to construct a cDNA library. In conclusion, CTAB method is effective to isolate total RNA on various types of durian tissues for further gene expression analysis.
Studies were conducted to assess the percutaneous absorption of the triacyglycerols (TAGs), tocols and carotenoids present in crude and refined palm oil. In vitro experiments using upright Franz diffusion cells were employed to investigate the permeability of these compounds across full thickness human skin and into the receptor solution. Cetrimide, a cationic surfactant was chosen to be used as a solubilising agent in the receptor phase with an optimum concentration of 3.0 mg/mL and was able to provide sink conditions throughout the permeation. TAGs, tocols and carotenoids all permeated human skin from crude palm oil (CPO), whereas only TAGs permeated when refined palm oil (RPO) was used. Of the TAGs, oleic acid-containing TAGs was preferentially absorbed despite palmitic acid being the most prevalent fatty acid (FA) in TAGs. Tocols in the form of α-T3 showed the highest permeation followed by γ-T3, α-T and the lowest permeation was observed for δ-T3. Carotenoids (α-carotene and β-carotene) also showed an appreciable amount of permeation from CPO.
The ability to detect the presence of transgenes in crop-derived foods depends on the quantity and quality of DNA obtained from a product to be analyzed. The efficiency of DNA extraction protocols differs due to the nature of each food product. In this paper, we described two main DNA extraction protocols and their modifications that have been applied and evaluated for DNA extraction from raw and processed food as well as animal feed. The yield and quality for five categories of food and feed samples namely, raw soybean, raw maize, animal feed, smooth tofu and soymilk are discussed. The statistical interaction analyses showed that the cetyltrimethyl ammonium bromide (CTAB) method was proven to be the best method to extract DNA from raw soybean, maize and animal feed samples which not only obtained high DNA yield of 32.7, 28.4 and 33.4 ng DNA/mg sample respectively, but also produced high quality DNA with the absorbance A260/A280 ratio of 1.9, 1.9 and 2.0, respectively. These DNA were suitable for PCR amplification which produced a 164 bp DNA fragment of the lectin gene from soybean, and a 277 bp DNA fragment of the zein gene from maize. In the processed food category, the Wizard isolation method was found to be the best for the extraction of DNA from smooth tofu and soymilk with the yield of 13.2 and 3.4 ng DNA/mg sample, and the quality of the DNA at the absorbance A260/A280 ratio ranged from 1.9 to 1.7. These DNA were successfully amplified using primers specific to the lectin gene of soybean.
A novel DNA biosensing platform was designed by the functionalization of iron oxide (Fe3O4)
with the carboxylic group via capping agent, mercaptopropionic acid (MPA) and conjugated
with nanocellulose crystalline (NCC) surface modified with surfactant cetyltrimethylammonium
bromide (CTAB) to assist in the DNA sensing capability. The product of nanocomposites
compound was drop-casted on screen printed carbon electrode (SPCE). Characterization by field
emission scanning electron microscope (FESEM) and energy dispersive X-Ray (EDX)
spectroscopy showing that carboxyl functionalized iron oxide (COOH-Fe3O4) can be hybridized
with NCC-CTA+ via electrostatic interaction.
Organomontmorillonites were synthesized by grafting cationic surfactants i.e quaternary ammonium compounds into the interlayer space and were characterized using XRD, FTIR and N2 adsorption/ desorption analysis. The organomontmorillonites were applied as catalyst for the esterification of glycerol (GL) with lauric acid (LA). The catalyst which had symmetrical onium salts (tetrabuthylammoniumbromide, TBAB) gave higher activity than that of unsymmetrical onium salts (cetyltrimethylammoniumbromide, CTAB). Over the TBAB-montmorillonite catalyst, glycerol monolaurate was obtained with a selectivity of about 80%, a lauric acid conversion of about 71% and a glycerol monolaurate yield of about 57%.
Metal nanoparticles having interesting shapes can be prepared in aqueous solutions through simple reductions of metal ions with the presence of some additive reagents, such as cetyltrimethylammonium bromide and hexamethylenetetramine. In this review, some successful results for shape-controlled synthesis of metal nanoparticles in our group are summarized, which includes the synthesis of palladium nanocubes, palladium nanobricks, gold nanotripods. In addition, combining with indium tin oxide electrode surfaces, shape-controlled growth is shown to be possible to form gold nanoplates and copper oxide nanowires. Even in relatively mild synthetic conditions, interesting shape-controlled synthesis of metal nanoparticles is possible.