Displaying publications 1 - 20 of 71 in total

Abstract:
Sort:
  1. Periyasamy P, Ng BH, Ali UK, Rashid ZZ, Kori N
    Infect Control Hosp Epidemiol, 2021 09;42(9):1150-1152.
    PMID: 32928321 DOI: 10.1017/ice.2020.465
    Matched MeSH terms: Respiratory Protective Devices*
  2. Amegah ML, Adanu EK, Kolawole Ojo T, Bukari S, Asare-Akuffo F
    Traffic Inj Prev, 2023;24(1):94-97.
    PMID: 36178858 DOI: 10.1080/15389588.2022.2127321
    OBJECTIVE: There is a dearth of empirical studies on motorcyclists' red-light running and helmet use at signalized intersections in low and middle-income countries like Ghana, Nigeria and Malaysia. This study seeks to fill the gap by looking at red-light running and helmet use at signalized intersections in the Cape Coast metropolis, Ghana. The study also identified potential areas of intervention to reduce the dangers posed by motorcyclists' red-light running in the Cape Coast Metropolis without the use of a helmet.

    METHOD: A naturalistic exploratory un-obstructive observational approach was used in assessing this phenomenon. The relationship between motorcyclists' behaviors and motorcyclists' observed demographic characteristics, the locality of the intersection, time of the week and presence of pillion passengers were analyzed. Chi-Square test of independence was used to establish the statistically significant relationships between dependent and independent variables.

    RESULTS: In all, 2,225 motorcyclists and 744 pillion passengers were observed. The results revealed that 33.1% of the motorcyclists ran a red light with 45.4% not using a helmet. Red-light running at signalized intersections was significantly linked to the locality of the intersection, time of the week, and helmet use. The helmet use was low and significantly associated with the presence of a pillion passenger and whether the pillion passenger used a helmet or not.

    CONCLUSION: Red-light running is influenced by locality of intersection, time of the week and helmet use. Efforts to reduce red-light running and improve helmet use should involve road safety education, awareness creation, and enforcement of traffic laws by the officials of the National Road Safety Authority and Motor Transport and Traffic Department of the Ghana Police Service. City managers in other low and middle-income countries can use the findings in the study to inform policy.

    Matched MeSH terms: Head Protective Devices*
  3. Samat S, Othman M, Kadni T
    Sains Malaysiana, 2006;35:79-82.
    Dosimeter pendarcahaya terma (TLD) telah mula digunakan untuk tujuan perlindungan sinaran. Peratus kepudaran yang rendah untuk satu jangka panjang merupakan salah satu kelebihannya. Harshaw sebagai salah satu pembekal telah mendokumenkan kepudaran TLD mereka iaitu kurang dari 2% untuk masa penyimpanan tidak melebihi tiga bulan. Kajian yang dijalankan di MINT ini menguji kepudaran TLD-100H Harshaw untuk tempoh 30 hari. Disamping mengesahkan apa yang telah didokumenkan, kajian ini mengesyorkan TLD dibaca setelah empat hari masa penyimpanan.
    Matched MeSH terms: Protective Devices
  4. Campero-Jurado I, Márquez-Sánchez S, Quintanar-Gómez J, Rodríguez S, Corchado JM
    Sensors (Basel), 2020 Nov 01;20(21).
    PMID: 33139608 DOI: 10.3390/s20216241
    Information and communication technologies (ICTs) have contributed to advances in Occupational Health and Safety, improving the security of workers. The use of Personal Protective Equipment (PPE) based on ICTs reduces the risk of accidents in the workplace, thanks to the capacity of the equipment to make decisions on the basis of environmental factors. Paradigms such as the Industrial Internet of Things (IIoT) and Artificial Intelligence (AI) make it possible to generate PPE models feasibly and create devices with more advanced characteristics such as monitoring, sensing the environment and risk detection between others. The working environment is monitored continuously by these models and they notify the employees and their supervisors of any anomalies and threats. This paper presents a smart helmet prototype that monitors the conditions in the workers' environment and performs a near real-time evaluation of risks. The data collected by sensors is sent to an AI-driven platform for analysis. The training dataset consisted of 11,755 samples and 12 different scenarios. As part of this research, a comparative study of the state-of-the-art models of supervised learning is carried out. Moreover, the use of a Deep Convolutional Neural Network (ConvNet/CNN) is proposed for the detection of possible occupational risks. The data are processed to make them suitable for the CNN and the results are compared against a Static Neural Network (NN), Naive Bayes Classifier (NB) and Support Vector Machine (SVM), where the CNN had an accuracy of 92.05% in cross-validation.
    Matched MeSH terms: Head Protective Devices*
  5. Yahaya SA, Ripin ZM, Ridzwan MIZ
    Osteoporos Int, 2020 Jan;31(1):43-58.
    PMID: 31446442 DOI: 10.1007/s00198-019-05128-x
    Various mechanical and biomechanical test systems to evaluate the effectiveness of hip protectors designed to prevent hip fracture as a result of falls were examined in this review. The articles considered were selected systematically. The effect of differences in design criteria was demonstrated, and it was observed that the impact energy employed during testing dramatically affects the performance of the hip protector. Over the past three decades, researchers have continuously experimented with various systems to determine the efficacy of various hip protectors. The primary aim has been to make informed decisions in optimizing hip protector design. This article provides a systematic review of various test systems employed in the determination of the biomechanical efficacy of hip protectors. A systematic literature search was carried out, and 28 relevant articles were included to demonstrate the effect of test systems in the evaluation of the biomechanical effectiveness of hip protectors. Methodological studies illustrated the appropriate use of impact testing systems for the simulation of hip anatomy and fall dynamics in evaluating the effectiveness of hip protectors in preventing a hip fracture. This systematic review has demonstrated the effect of the variability of test systems on the evaluation of impact attenuation by various hip protectors. The lack of standardized test systems accounts for the inconsistencies in the test results of the efficacy of hip protectors. This has been a major challenge in the efforts of researchers to optimize the interventions. The standardization of test systems may require needed improvements immediately as opposed to the development of new interventions in order to ensure that only hip protectors with adequately proven efficacies are deployed for clinical trials or for the protection of the hips of vulnerable individuals from sideways impact.
    Matched MeSH terms: Protective Devices*
  6. Seluakumaran K, Shaharudin MN
    Int J Audiol, 2022 Oct;61(10):850-858.
    PMID: 34455907 DOI: 10.1080/14992027.2021.1969455
    OBJECTIVE: To undertake calibration and preliminary validation of a custom-designed computer-based screening audiometer connected to consumer insert phone-earmuff combination for adult pure tone audiometry.

    DESIGN: Part 1 involved electroacoustic measurement and biological calibration of a laptop-earphone pair used for the computer-based audiometry (CBA). Part 2 compared CBA thresholds obtained without a sound booth with those measured using the gold-standard clinical audiometry.

    STUDY SAMPLE: 17 young normal-hearing volunteers (Part 1) and 43 normal and hearing loss subjects (Part 2) recruited from an audiology clinic via convenience sampling.

    RESULTS: The transducer-device combination produced outputs suitable for measuring thresholds down to 0 dB HL. Threshold pairs obtained from the CBA and clinical audiometry were highly correlated (Spearman's correlation coefficient, ρ = 0.92, p 25 dB HL.

    CONCLUSIONS: The use of a computer-based audiometer application with consumer insert phone-earmuff combination can offer a cost-effective solution for boothless screening audiometry.

    Matched MeSH terms: Ear Protective Devices*
  7. Khairul Hasni NA, Ismail R, Muhamad Robat R, Mohamad N, Suib FA, Pahrol MA, et al.
    PLoS One, 2023;18(11):e0288105.
    PMID: 38019763 DOI: 10.1371/journal.pone.0288105
    This study examined the association of various brands of NIOSH-certified N95 filtering face-piece respirators (FFR) fit with facial dimensions and gender. One hundred and thirty-five participants (77 females and 58 males) were recruited from the previous facial anthropometry study among Malaysians in 2020. Quantitative respirator fit testing of six FFR were performed using the TSI Portacount Pro+ 8038 which comprised of four exercises (bending over, talking, up-down head movement, and side to side head movement). An overall fit factor (FF) of ≥ 100 was considered a pass for each FFR. Analysis was done using T-test, Pearson's correlations, and generalised linear regression. The passing rates for the six FFR were 36.3% (Cup B), 50.4% (Trifold A), 54.1% (Duckbill A), 57.0% (Cup A), 74.1% (Trifold B), and 83.7% (Duckbill B). Both Duckbill B and Trifold B had the highest passing rates for both genders. However, certain FFR models (Cup B, Trifold A, Trifold B, and Duckbill A) fit better for participants with large facial size who were mostly males, while others (Cup A and Duckbill B) specifically fit better for those with small facial size, who were mostly females. This study showed significant positive effect of nose protrusion, nasal root and subnasale-sellion and the negative effect of menton-sellion, bigonial breadth and nose breadth on fit factors of various FFR. The results of this study emphasized the importance of choosing and designing FFR based on local anthropometry data, with careful consideration on the dimensions that affect the respirator fit. Since N95 are commonly used in the healthcare settings to prevent airborne transmission, the practice of respirator fit testing and selecting N95 with high passing rates for healthcare workers need to be emphasized.
    Matched MeSH terms: Respiratory Protective Devices*
  8. Gan F, Sooriappragasarao M, Sulaiman S, Razali N, Hong JGS, Tan PC
    Sleep, 2023 Dec 11;46(12).
    PMID: 37478474 DOI: 10.1093/sleep/zsad196
    STUDY OBJECTIVES: To evaluate at-home use of eye-mask and earplugs (EMEP) versus sleep hygiene advice leaflet (AL) on actigraphy-derived night sleep duration in sleep-deprived pregnant women.

    METHODS: A randomized controlled trial was conducted in the antenatal clinic of University Malaya Medical Centre from June 2021 to June 2022. Women at 34-36 weeks gestation with self-reported night sleep duration ≤6 hours were recruited. Participants wore an actigraphy device at night for seven consecutive nights (Observation/Baseline week). Only women whose actigraphy-derived night sleep duration was confirmed to be ≤360 minutes were randomized to use EMEP or AL. Actigraphy was continued for another week (Intervention week). Primary outcome was change in actigraphy-derived night sleep duration from observation to intervention week across trial arms. Secondary outcomes include participants' sleep quality, labor, and neonatal outcome. Comparisons were by Student t-test, Mann-Whitney U test, and chi-square test.

    RESULTS: A total of 210 women were randomized: 105 each to EMEP and AL. The increase in night sleep duration over baseline was significantly longer with both EMEP (mean ± SD) 23 ± 41 minutes, p 

    Matched MeSH terms: Ear Protective Devices*
  9. Lazim TR, Zainol J
    J R Coll Surg Edinb, 1996 Apr;41(2):122-3.
    PMID: 8632386
    Several sizes of plastic cap were designed and made to fit the vertex of the penile glans. The foreskin is prepared in the usual manner, the glans capped with the specially made plastic cap and the foreskin pulled forwards over the cap. A crushing or non-crushing forceps is applied across the foreskin. The plastic cap separates the glans from the clamp, and its unwanted portion is cut with a knife without fear of injuries in the glans. We find this method to be safe even if it is used by a surgeon with limited experience.
    Matched MeSH terms: Protective Devices
  10. Yusof Abdullah, Mohd Reusmaazran Yusof, Azali Muhamad, Zaifol Samsu, Nurhaslinda Ee Abdullah
    MyJurnal
    Boron carbide (B4C) is a ceramic material which is effective to absorb thermal neutron due to wide neutron absorption cross section. In this work, B4C is added into concrete as fine aggregates to test the attenuation properties by getting the attenuation coefficient of the concrete/B4C. The samples of concrete/B4C were exposing to the thermal neutron radiation source (241-Americium-Berylium) at the dos rate of 29.08 mR/h. The result show that the attenuation coefficient of the sample with 20wt% B4C is 0.299cm -1 and the sample without B4C is 0.238cm -1 and hence, concrete/B4C is suitable as a shield for thermal neutron radiation.
    Matched MeSH terms: Protective Devices
  11. Wan, Ngeow Yen, Chin, Khaw Pei, Che Su Mt. Saad
    MyJurnal
    Reclaimed rubber from rejected natural rubber (NR) latex gloves (r-NRG) was evaluated as partial
    replacement for Standard Malaysian Rubber (SMR) 20 in producing microcellular rubber. In the study, the amount of reclaimed rubber varied from 20 pphr to 95 pphr for the purpose of cost reduction, environmental interest and as processing aids in reducing internal porosity, swells and to minimize shrinkage and air-trapped problems in producing microcellular rubber. A typical formulation in making microcellular rubber slab was developed and two-roll mill was used for compounding. The cure characteristics and mechanical properties, such as density, hardness, tensile strength, and elongation at break, were evaluated. Scorch time and cure rate index performed marginal decreased with increasing of r-NRG content. 95 pphr r-NRG blends showed a consequential drop in hardness. Both tensile properties and elongation at break decreased as the r-NRG content was increased.
    Matched MeSH terms: Protective Devices
  12. Noordeyana T, Rozmi I, Muhammad Ajib Abdul R, Mohd Nasir S, Nurul Shafini S, Norhayati I, et al.
    Jurnal Psikologi Malaysia, 2018;32:94-103.
    Artikel ini bertujuan mengkaji keberkesanan program SHIELDS daripada perspektif pelajar dan urusetia yang telah turut terlibat. Program SHIELDS adalah satu bentuk program campbased yang diperkenalkan hasil kerjasama antara Kementerian Pendidikan dan Pihak Agensi Anti Dadah Kebangsaan (AADK). Nama SHEILDS ini adalah akronim yang bermaksud Sayangi Hidup, Elak Derita Selamanya. Sehubungan itu, program ini bertujuan meningkatkan kesedaran dan mengupayakan ketahanan diri murid (lingkungan umur 13 hingga 18 tahun) yang dikenalpasti berisiko dalam penyalahgunaan dadah. Kajian kuantitatif ini melibatkan dua fasa iaitu fasa pertama adalah mengedarkan soal selidik sebelum dan selepas program SHIELDS dijalankan. Manakala, fasa kedua pula adalah sesi follow up selepas 3 bulan terhadap 50 pelajar yang telah terlibat dengan program SHIELDS terlebih dahulu. Hasil kajian menunjukkan secara keseluruhan perspektif pelajar seramai 559 orang yang terlibat dengan program SHIELDS ini adalah baik dengan min=4.48. Kesimpulannya, dapatan ini menunjukkan bahawa program SHIELDS ini sewajarnya diteruskan dengan beberapa penambahbaikan untuk kelangsungan program dan kebaikan semua pihak yang terlibat.
    Matched MeSH terms: Protective Devices
  13. Fauzan NS, Sukadarin EH, Widia M, Irianto I, Ghazali I
    PMID: 36833630 DOI: 10.3390/ijerph20042934
    This systematic literature review (SLR) aims to determine the factors influencing the use of hearing protection devices (HPDs) among industrial workers. This study was guided by the PRISMA Statement (Preferred Reporting Items for Systematic reviews and Meta-Analyses) review method, and four databases comprising Scopus, Science Direct, PubMed, Wiley Online Library, and Google Scholar were employed. A total of 196 articles were identified, and 28 studies on the factors associated with HPD use among industrial workers from 2006 to 2021 met the inclusion criteria. Resultantly, five main themes emerged from this review: sociodemographic (29%), interpersonal influences (18%), situational influences (18%), cognitive-perceptual (29%), and health-promoting behavior (6%) associated with HPD use among industrial workers. A total of 17 sub-themes were identified, including age, gender, educational level, noise level, working experience, social models, interpersonal support, social norms, safety climate, training, organizational support, perceived barrier, perceived susceptibility, perceived severity, perceived benefit, self-efficacy, and cues to action. The significant factors influencing workers to use HPDs are sociodemographic, interpersonal influences, situational influences, and health-promoting behavior. Future studies should focus on the cues to action toward human behavior influencing the use of HPDs, workers' health status, and comorbidities of hearing loss. Therefore, this systematic study gives valuable reference resources for up-and-coming researchers as well as new knowledge to expert professionals and academics in various industries.
    Matched MeSH terms: Ear Protective Devices
  14. Al-Fakih E, Arifin N, Pirouzi G, Mahamd Adikan FR, Shasmin HN, Abu Osman NA
    J Biomed Opt, 2017 Aug;22(8):1-8.
    PMID: 28822140 DOI: 10.1117/1.JBO.22.8.087001
    This paper presents a fiber Bragg grating (FBG)-instrumented prosthetic silicone liner that provides cushioning for the residual limb and can successfully measure interface pressures inside prosthetic sockets of lower-limb amputees in a simple and practical means of sensing. The liner is made of two silicone layers between which 12 FBG sensors were embedded at locations of clinical interest. The sensors were then calibrated using a custom calibration platform that mimics a real-life situation. Afterward, a custom gait simulating machine was built to test the liner performance during an amputee's simulated gait. To validate the findings, the results were compared to those obtained by the commonly used F-socket mats. As the statistical findings reveal, both pressure mapping methods measured the interface pressure in a consistent way, with no significant difference (P-values ≥0.05). This pressure mapping technique in the form of a prosthetic liner will allow prosthetics professionals to quickly and accurately create an overall picture of the interface pressure distribution inside sockets in research and clinical settings, thereby improving the socket fit and amputee's satisfaction.
    Matched MeSH terms: Protective Devices*
  15. Law TH, Noland RB, Evans AW
    Risk Anal, 2013 Jul;33(7):1367-78.
    PMID: 23106188 DOI: 10.1111/j.1539-6924.2012.01916.x
    It has been shown that road safety laws, such as motorcycle helmet and safety belt laws, have a significant effect in reducing road fatalities. Although an expanding body of literature has documented the effects of these laws on road safety, it remains unclear which factors influence the likelihood that these laws are enacted. This study attempts to identify the factors that influence the decision to enact safety belt and motorcycle helmet laws. Using panel data from 31 countries between 1963 and 2002, our results reveal that increased democracy, education level, per capita income, political stability, and more equitable income distribution within a country are associated with the enactment of road safety laws.
    Matched MeSH terms: Head Protective Devices*
  16. Shazrizil Zakaria, Desa Ahmad, Khalina Abdan, Mohd Rafee Baharudin
    MyJurnal
    Fire emergencies are threat to the occupants of a residential college. Some of the Malaysian residential colleges were built in the 1970s. Back then, the compliancy to Uniform Building By-law 1984 was not entirely practiced. This study aims to evaluate fire safety measures in selected residential colleges of a Malaysian University, which were built before 1984. This includes occupants’ level of awareness and knowledge of the occupants regarding fire safety measures. This study was conducted in selected residential colleges, built before 1984, which were named as A, B, C, and D Colleges. One new college building was selected to be the control variable, the E College. Survey questionnaires were given to 401 respondents to obtain information regarding the fire safety awareness and knowledge. Fire safety inspections were conducted to determine the level of fire safety protection systems in colleges and the documentation of emergency response plan were reviewed. From the study, the level of fire safety awareness among the occupants were higher compared to their fire safety knowledge. Fire safety inspection result indicated that overall buildings inspected complies with the local regulation while safety documentation reviews were satisfactorily adequate. Overall, the score for fire safety measures in all selected colleges were sufficient and in good condition. This study is significant for those in the field of safety and health practice pertaining to fire safety engineering and regulations, to plan for better and more efficient fire hazard and risk assessment.
    Matched MeSH terms: Protective Devices
  17. A Almusaylim Z, Jhanjhi NZ, Alhumam A
    Sensors (Basel), 2020 Oct 22;20(21).
    PMID: 33105891 DOI: 10.3390/s20215997
    The rapid growth of the Internet of Things (IoT) and the massive propagation of wireless technologies has revealed recent opportunities for development in various domains of real life, such as smart cities and E-Health applications. A slight defense against different forms of attack is offered for the current secure and lightweight Routing Protocol for Low Power and Lossy Networks (RPL) of IoT resource-constrained devices. Data packets are highly likely to be exposed in transmission during data packet routing. The RPL rank and version number attacks, which are two forms of RPL attacks, can have critical consequences for RPL networks. The studies conducted on these attacks have several security defects and performance shortcomings. In this research, we propose a Secure RPL Routing Protocol (SRPL-RP) for rank and version number attacks. This mainly detects, mitigates, and isolates attacks in RPL networks. The detection is based on a comparison of the rank strategy. The mitigation uses threshold and attack status tables, and the isolation adds them to a blacklist table and alerts nodes to skip them. SRPL-RP supports diverse types of network topologies and is comprehensively analyzed with multiple studies, such as Standard RPL with Attacks, Sink-Based Intrusion Detection Systems (SBIDS), and RPL+Shield. The analysis results showed that the SRPL-RP achieved significant improvements with a Packet Delivery Ratio (PDR) of 98.48%, a control message value of 991 packets/second, and an average energy consumption of 1231.75 joules. SRPL-RP provided a better accuracy rate of 98.30% under the attacks.
    Matched MeSH terms: Protective Devices
  18. Sadaghiani MS, Arami-Niya A, Zhang D, Tsuji T, Tanaka Y, Seiki Y, et al.
    J Hazard Mater, 2021 04 05;407:124781.
    PMID: 33412363 DOI: 10.1016/j.jhazmat.2020.124781
    Given the safety issues associated with flammability characteristics of alternative environmentally-friendly refrigerants, it is vital to establish measurement systems to accurately analyse the flammability of these mildly flammable refrigerants. In this study, we used a customised Hartmann bomb analogue to measure the minimum ignition energy (MIE) and laminar burning velocity (BV) for refrigerant/air mixtures of pure ammonia (R717), R32, R1234yf and mixtures of R32 and R1234yf with non-flammable refrigerants of R134a, R125 and carbon dioxide (R744). The MIEs of R717, R32, and R1234yf were measured at an ambient temperature of 24 °C to be (18.0 ± 1.4), (8.0 ± 1.5) and (510 ± 130) mJ at equivalence ratios of 0.9, 1.27 and 1.33, respectively. Adding the non-flammable refrigerants R134a, R125 and R744 along with R32 at volumetric concentrations of 5% each to R1234yf reduced the latter compound's flammability and increased its MIE by one order of magnitude. The laminar burning velocities of pure R717 and R32 were measured at an equivalence ratio of 1.1 using the flat flame method and found to be 8.4 and 7.4 cm/s, respectively. Adding 5% R1234yf to R32 decreased the laminar burning velocity by 11%, while a further 5% addition of R1234yf resulted in a decrease of over 30% in the laminar burning velocity.
    Matched MeSH terms: Protective Devices
  19. Mohamad Awais, A. Syafiq Ramli, Abdul Aziz Mohamed, Megat Harun M.A., Azraf Azman, M. Rawi Md Zin, et al.
    MyJurnal
    This work main aim is to study the analysis of slow neutrons which include thermal and
    epithermal neutrons and also analysis on fast neutrons. The outcome from this work showed that
    the comparison result between fast and slow neutrons. The safety assessment at reactor TRIGA
    FUSFATI (RTF) is one of the main objectives of the work and there is a detailed discussion on it
    which helped in accomplishing the task. Gamma Rays produced in this experiment was high and in
    the experiment and it is realized that the shielding plays a vital role in the success of this
    experiment which prevents all the radiations. From the results of the experiment it is realized that
    these gamma rays are not suitable for the application of Boron Neutron Capture Therapy
    (BNCT). However, these radiations are suitable for the application of Neutron Radiography (NR).
    The study on this work will help in study of nuclear applications such as BNCT, NR, SANS etc.
    These applications are using in medical and nuclear fields. The electronic device used in the
    experiment to detect neutron is Neutron Spectrometer. The results from Neutron Spectrometer
    and TLDs are very similar which showed that the experiment is a success. Numerical results were
    compared with those available in literature for validation.
    Matched MeSH terms: Protective Devices
  20. Kulanthayan S, Umar RS, Hariza HA, Nasir MTM, Harwant S
    Med J Malaysia, 2000 Mar;55(1):40-4.
    PMID: 11072489 MyJurnal
    Motorcyclists make up the largest group of fatalities on Malaysian roads, majority succumbing to head injuries despite the compulsory safety helmet laws in the country. One possible reason for this high fatality is improper usage of safety helmets. This study examines the compliance of proper safety helmet use in motorcyclists in a typical Malaysian town. Five hundred motorcyclists were studied. Only 54.4% of motorcyclists used helmets properly, 21.4% used them improperly; and 24.2% did not wear helmets. Six variables were found to be significant in improper safety helmet use. They were age, gender, race, formal education level, prior accident experience and type of license held. Marital status and riding experience were not significant. Efforts promoting proper use of safety helmets should focus on the young, male, less formally educated, unlicensed rider, who has had a prior accident.
    Matched MeSH terms: Head Protective Devices/utilization*; Head Protective Devices/statistics & numerical data
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links