An investigation on the properties of Tenun Pahang fabric performances using alternative yarns was conducted. The studies were made in order to evaluate whether the Tenun Pahang fabric could be produced economically and at the same time maintain the fabric quality. Traditional Tenun Pahang fabric uses silk for both warp and weft. For this project, two alternative yarns were used which were bamboo and modal, which were a little lower in cost compared to silk. These yarns were woven with two variations, one with the yarns as weft only while maintaining the silk warp and the other with both warp and weft using the alternative yarns. Four (4) physical testing and three (3) mechanical testing conducted on the fabric samples. The fabric samples were evaluated including weight, thickness, thread density, crease recovery angle, stiffness and drapability. The results show that modal/silk and bamboo silk fabrics are comparable in terms of stiffness and drapability, hence they have the potential to replace 100% silk Tenun Pahang.
Parameter mekanik seperti nisbah Poisson merupakan parameter input kejuruteraan batuan terutamanya dalam perisian komputer model berangka. Kaedah seismos digunakan untuk menentukan nisbah Poisson jasad batuan segar (gred I), terluluhawa sedikit (gred II), terluluhawa sederhana (gred III) dan tinggi (gred IV). Nisbah Poisson setiap lapisan jasad batuan dikira berdasarkan nilai purata halaju gelombang mampatan (Vp) dan gelombang ricih (Vs) pada kedalaman tertentu. Halaju gelombang mampatan (Vp) diperoleh daripada survei seismos biasan dan halaju gelombang ricih (Vs) diperoleh daripada survei analisis spektral gelombang permukaan (SASW) atau analisis gelombang permukaan berbilang saluran (MASW). Sebanyak 66 ujian seismos telah dijalankan pada 9 cerun jasad batuan iaitu 6 ujian di atas 1 cerun jasad batuan granit di JKR kuari Bukit Penggorak, Kuantan, Pahang; 26 ujian di atas 4 cerun jasad batuan granit di Kuari Kajang Rock, Semenyih, Ulu Langat, Selangor; 12 ujian di atas 1 cerun jasad batuan granit di Lebuhraya Silk Kajang (km 14.6) Selangor; 14 ujian di atas 2 cerun jasad batuan syis di Jalan Kuala Kubu Baru-Bukit Fraser (km 15), Selangor dan 8 ujian di atas 1 cerun jasad batuan kuarzit di Section U10, Bukit Cherakah, Shah Alam, Selangor. Daripada ujian seismos, nilai maksimum nisbah Poisson jasad batuan yang bergred I, II, III dan IV ialah 0.295, 0.335, 0.355 dan 0.364. Nilai minimum nisbah Poisson jasad batuan yang mempunyai gred I, II, III dan IV ialah 0.215, 0.299, 0.334 dan 0.337. Nilai purata nisbah Poisson untuk jasad batuan bergred I, II, III dan IV ialah 0.274, 0.320, 0.345 dan 0.345. Nilai nisbah Poisson jasad batuan menjadi semakin besar apabila gred terluluhawa menjadi semakin besar. Nilai purata nisbah Poisson jasad batuan gred II, III dan IV bertambah sebanyak 16.8%, 25.9% dan 25.9% jika dibandingkan dengan jasad batuan gred I. Keadaan ini berlaku kerana perubahan retakan pada jasad batuan gred I adalah lebih besar apabila mengalami proses terluluhawa. Perubahan retakan menjadi semakin kecil apabila mengalami proses terluluhawa seterusnya. Tiada perubahan retakan berlaku pada jasad batuan gred III apabila menjadi jasad batuan gred IV.
Fiber composites are known to have poor through-thickness mechanical properties due to the absence of a Z-direction binder. This issue is more critical with the use of natural fibers due to their low strength compared to synthetic fibers. Stitching is a through-thickness toughening method that is used to introduce fibers in the Z-direction, which will result in better through-thickness mechanical properties. This research was carried out to determine the mechanical properties of unstitched and silk fiber-stitched woven kenaf-reinforced epoxy composites. The woven kenaf mat was stitched with silk fiber using a commercial sewing machine. The specimens were fabricated using a hand lay-up method. Three specimens were fabricated, one unstitched and two silk-stitched with deferent stitching orientations. The results show that the stitched specimens have comparable in-plane mechanical properties to the unstitched specimens. For the tensile mechanical test, stitched specimens show similar and 17.1% higher tensile strength compared to the unstitched specimens. The flexural mechanical test results show around a 9% decrease in the flexural strength for the stitched specimens. On the other hand, the Izod impact mechanical test results show a significant improvement of 33% for the stitched specimens, which means that stitching has successfully improved the out-of-plane mechanical properties. The outcome of this research indicates that the stitched specimens have better mechanical performance compared to the unstitched specimens and that the decrease in the flexural strength is insignificant in contrast with the remarkable enhancement in the impact strength.
Many organisms use chemicals to deter enemies. Some spiders can modify the composition of their silk to deter predators from climbing onto their webs. The Malaysian golden orb-weaver Nephila antipodiana (Walckenaer) produces silk containing an alkaloid (2-pyrrolidinone) that functions as a defense against ant invasion-ants avoid silk containing this chemical. In the present study, we test the generality of ants' silk avoidance behavior in the field. We introduced three ant species to the orb webs of Nephila clavipes (Linnaeus) in the tropical rainforest of La Selva, Costa Rica. We found that predatory army ants (Eciton burchellii Westwood) as well as non-predatory leaf-cutting ants (Atta cephalotes Linnaeus and Acromyrmex volcanus Wheeler) avoided adult N. clavipes silk, suggesting that an additional species within genus Nephila may possess ant-deterring silk. Our field assay also suggests that silk avoidance behavior is found in multiple ant species.
Of late, dyeing fabrics with natural dyes have become an attraction because of its eco-friendly and less threatening disposition towards humankind. In the textile colouration industry, natural dyes play an important role because of the need for replacement synthetic dyes which have a great deal of tension with the environmental issues. This study focuses on the colour shade, colour coordinates, and fastness properties of dyed silk fabric from tagetes erecta (Mexican Marigold flower) using the water boiling extraction method. The dyeing was carried out using lemon juice as a natural mordant through the simultaneous mordanting method, using two different dyeing methods: infrared (IR) dyeing and exhaustion dyeing. The shades produced for exhaustion dyed fabric is light-yellow compared to the IR dyed fabric, which is medium-light yellow. These shades were confirmed with the CIELAB colour coordinates, L*a*b* values. The colourfastness to washing, perspiration, rubbing, and light of the fabrics were conducted to investigate the performance of the dye and mordant on the dyed silk fabrics. The colourfastness properties of the dyed silk fabric using infrared (IR) dyeing technique have better performance than using exhaustion dyeing technique.
The rapid development of the textile industry and improvement of people's living standards have led to the production of cotton textile and simultaneously increased the production of textile wastes. Cotton is one of the most common textile materials, and the waste cotton accounts for 24% of the total textile waste. To effectively manage the waste, recycling and reusing waste cotton are common practices to reduce global waste production. This paper summarizes the characteristics of waste cotton and high-value products derived from waste cotton (e.g., yarns, composite reinforcements, regenerated cellulose fibers, cellulose nanocrystals, adsorptive materials, flexible electronic devices, and biofuels) via mechanical, chemical, and biological recycling methods. The advantages and disadvantages of making high-value products from waste cotton are summarized and discussed. New technologies and products for recycling waste cotton are proposed, providing a guideline and direction for merchants and researchers. This review paper can shed light on converting textile wastes other than cotton (e.g., bast, silk, wool, and synthetic fibers) into value-added products.
A one-pot green sonochemical process assisted by ascorbic acid as the reducing agent to produce highly reduced graphene oxide (rGO) decorated with silver nanoparticles (AgNPs) is demonstrated. A complete removal of oxygen-containing group in the GO sheets was confirmed by no observation of the peak corresponds to C-O, C=O and -OH bond. The unexpected decrease of peak intensity corresponds to sp2 hybridized C=C group is explained by a so-called bond polarity effect. The peak observed at ~400 nm seems to show the presence of AgNPs and the red shifting of C=C peak to ~270 nm after the introduction of ascorbic acid indicates the formation of highly reduced GO. The increase of AgNPs size and the crumpled silk-like morphology after the introduction of ascorbic acid also indicate the aggressive reduction of both AgNPs and GO. The increase of ID/IG ratio after the introduction of ascorbic acid seems to indicate the increase of the number of small sp2 domains, the presence of unrepaired defects and the restoration of the sp2 network. This work provides the promising green sonochemical approach by utilizing non-toxic and environmental-friendly reducing agent to produce highly reduced GO decorated with AgNPs for various applications.
Cytogenetics studies in domestic animal are
gaining importance because of their genetics and implication in
breeding programmes. The present study describes the
chromosome number and karyotypic characteristics of Ganjia
sheep and comparison between males and females breeds. We
adopt the method of cultivating somatic cells, and analyzed the
chromosome karyotype of the Ganjia sheep. The result
indicates the diploid chromosome of the Gangia sheep is 2n=54,
in which 26 pairs of autosomes and a pair of sex chromosome
were observed. Result indicates all autosomes are tip silk. The X
chromosome was acrocentric and largest except the first three
pairs that were metacentric. The Y chromosome was the
smallest, biarmed and probably metacentric chromosome.
In vitro production of sperm is a desirable idea for fertility preservation in azoospermic men and prepubertal boys suffering from cancer. In this study, a biocompatible porous scaffold based on a triad mixture of silk fibroin (SF), alginate (Alg), and laminin (LM) is developed to facilitate the differentiation of mouse spermatogonia stem cells (SSCs). Following SF extraction, the content is analyzed by SDS-PAGE and stable porous 3D scaffolds are successfully prepared by merely Alg, SF, and a combination of Alg-SF, or Alg-SF-LM through freeze-drying. Then, the biomimetic scaffolds are characterized regarding the structural and biological properties, water absorption capacity, biocompatibility, biodegradability, and mechanical behavior. Neonatal mice testicular cells are seeded on three-dimensional scaffolds and their differentiation efficiency is evaluated using real-time PCR, flow cytometry, immunohistochemistry. Blend matrices showed uniform porous microstructures with interconnected networks, which maintained long-term stability and mechanical properties better than homogenous structures. Molecular analysis of the cells after 21 days of culture showed that the expression of differentiation-related proteins in cells that are developed in composite scaffolds is significantly higher than in other groups. The application of a composite system can lead to the differentiation of SSCs, paving the way for a novel infertility treatment landscape in the future.
Introduction: Accelerants and fabrics are commonly used to spread fire attributable to their highly flammable prop- erties. Hence, having the ability to discriminate the different types of accelerants on various types of fabrics after fire and/or arson using the non-destructive Attenuated Total Reflectance-Fourier Transform Infrared (ATR-FTIR) spec- troscopy coupled with chemometric techniques appears forensically relevant. Methods: Six types of fabrics viz. cotton, wool, silk, rayon, satin, and polyester, were burnt completely with RON95 and RON97 gasoline as well as diesel. Subsequently, the samples were analyzed by ATR-FTIR spectroscopy followed by Principal Component Analysis (PCA) and Linear Discriminant Analysis (LDA) for discriminating the different types of accelerants on such burned fabrics. Results: RON95 showed the fastest rate of burning on all fabric types. Results also revealed that while wool had the slowest burning rate for all the three different accelerants, polyester, cotton, and satin demon- strated the highest rate of burning in RON95, RON97, and diesel, respectively. FTIR spectra revealed the presence of alkane, alcohol, alkene, alkyne, aromatic, and amine compounds for all fabrics. The two dimensional PCA (PC1 versus PC2) demonstrated 71% of variance and it was improved by cross-validation through the three dimensional LDA technique with correct classification of 77.8%. Conclusion: ATR-FTIR spectroscopy coupled with chemometric techniques had enabled identification of the functional groups, as well as statistically supported discrimination of the different accelerants, a matter of relevance in forensic fire and arson investigations.
The effect of corn silk or Zea mays extract on the physicochemical changes of virgin coconut oil was studied during three consecutive days of deep frying. There were three types of oil blend systems used: virgin coconut oil without antioxidant as control system; virgin coconut oil with butylated hydroxytoluene (BHT) as synthetic antioxidant and virgin coconut oil with Zea mays extract as natural antioxidant. The oil quality was assessed by measuring the colour, viscosity, peroxide, p-anisidine, free fatty acids, totox and iodine value. The results show that Zea mays extract delayed the oil deterioration. The Zea mays extract significantly (p<0.05) lowered the rate of oxidation in virgin coconut oil compared to control oil and was comparable to BHT. Zea mays extract did not change the sensory profiles of French fries which was shown by insignificant difference (p<0.05) between Zea mays and control fries for all sensory attributes (colour, taste, aroma, crispiness, oiliness and overall quality). In general, the Zea may extract was capable of extending the stability and quality of virgin coconut oil and therefore has potential as new source of natural antioxidant for use in deep frying.
INTRODUCTION: Scalp care is essential because it determines the health and condition of the hair and prevents the diseases of scalp and hair. The objectives of our study were to correlate race and hair types, to determine the awareness of hair care among Malaysian medical students, and to distinguish the factors that affect the health of hair and scalp.
METHODOLOGY: It was a cross-sectional study wherein validated questionnaires were given to 240 medical undergraduate students who belonged to three ethnic races of Malaysia, i.e., Chinese, Malay, and Malaysian Indians after their informed consent. The results were then analyzed using percentage statistics.
RESULTS: Chinese students had comparatively healthier scalp without dandruff. Most Chinese and Indians had silky type of hair while Malay had dry, rough hair. Chinese and Indians colored their hair and used various styling methods; while among the Malays, this percentage was very less. Regarding hair care practices, males used only shampoo and females used shampoo and conditioner for hair wash. Students also faced dietary and examination-related stress.
CONCLUSION: Results indicate that there exist morphological differences in hair among the studied population. Since most students color their hair and employ various hairstyling methods, they should be educated regarding best hair care practices to improve their scalp hair condition and health.
Skin and soft tissue infections are major concerns with respect to wound repair. Recently, anti-bacterial wound dressings have been emerging as promising candidates to reduce infection, thus accelerating the wound healing process. This paper presents our work to develop and characterize poly(vinyl alcohol) (PVA)/chitosan (CS)/silk sericin (SS)/tetracycline (TCN) porous nanofibers, with diameters varying from 305 to 425 nm, both in vitro and in vivo for potential applications as wound dressings. The fabricated nanofibers possess a considerable capacity to take up water through swelling (~325-650%). Sericin addition leads to increased hydrophilicity and elongation at break while decreasing fiber diameter and mechanical strength. Moreover, fibroblasts (L929) cultured on the nanofibers with low sericin content (PVA/CS/1-2SS) displayed greater proliferation compared to those on nanofibers without sericin (PVA/CS). Nanofibers loaded with high sericin and tetracycline content significantly inhibited the growth of Escherichia coli and Staphylococcus aureus. In vivo examination revealed that PVA/CS/2SS-TCN nanofibers enhance wound healing, re-epithelialization, and collagen deposition compared to traditional gauze and nanofibers without sericin. The results of this study demonstrate that the PVA/CS/2SS-TCN nanofiber creates a promising alternative to traditional wound dressing materials.
A novel method of preparing reduced graphene oxide (RGOX) from graphene oxide (GOX) was developed employing vegetable extract, Chenopodium album, as a reducing and stabilizing agent. Chenopodium album is a green leafy vegetable with a low shelf life, fresh leaves of this vegetable are encouraged to be used due to high water content. The previously modified 'Hummers method' has been in practice for the preparation of GOX by using precursor graphite powder. In this study, green synthesis of RGOX was functionally verified by employing FTIR and UV-visible spectroscopy, along with SEM and TEM. Our results demonstrated typical morphology of RGOX stacked in layers that appeared as silky, transparent, and rippled. The antibacterial activity was shown by analyzing minimal inhibitory concentration values, agar diffusion assay, fluorescence techniques. It showed enhanced antibacterial activity against Gram-positive and Gram-negative bacteria in comparison to GOX. It has also been shown that the synthesized compound exhibited enhanced antibiofilm activity as compared to its parent compound. The efficacy of RGOX and GOX has been demonstrated on a human breast cancer cell line, which suggested RGOX as a potential anticancer agent.
The purification of human adipose-derived stem cells (hADSCs) from human adipose tissue cells (stromal vascular fraction) was investigated using membrane filtration through poly(lactide-co-glycolic acid)/silk screen hybrid membranes. Membrane filtration methods are attractive in regenerative medicine because they reduce the time required to purify hADSCs (i.e., less than 30 min) compared with conventional culture methods, which require 5-12 days. hADSCs expressing the mesenchymal stem cell markers CD44, CD73, and CD90 were concentrated in the permeation solution from the hybrid membranes. Expression of the surface markers CD44, CD73, and CD99 on the cells in the permeation solution from the hybrid membranes, which were obtained using 18 mL of feed solution containing 50 × 10⁴ cells, was statistically significantly higher than that of the primary adipose tissue cells, indicating that the hADSCs can be purified in the permeation solution by the membrane filtration method. Cells expressing the stem cell-associated marker CD34 could be successfully isolated in the permeation solution, whereas CD34⁺ cells could not be purified by the conventional culture method. The hADSCs in the permeation solution demonstrated a superior capacity for osteogenic differentiation based on their alkali phosphatase activity, their osterix gene expression, and the results of mineralization analysis by Alizarin Red S and von Kossa staining compared with the cells from the suspension of human adipose tissue. These results suggest that the hADSCs capable of osteogenic differentiation preferentially permeate through the hybrid membranes.