Displaying publications 1 - 20 of 294 in total

Abstract:
Sort:
  1. Tavana N, Ting TH, Lai K, Kennerson ML, Thilakavathy K
    Ital J Pediatr, 2022 Dec 08;48(1):193.
    PMID: 36482408 DOI: 10.1186/s13052-022-01385-5
    BACKGROUND: Hypophosphatemic rickets (HR) is a genetic disease of phosphate wasting that is characterized by defective bone mineralization. The most common cause of the disease is mutations in the phosphate regulating gene with homologies to endopeptidases on the X chromosome (PHEX) gene. The aims of this study were to identify the gene variants responsible for HR in three cases of Malaysian origin from three independent families and to describe their clinical, biochemical, and radiological features.

    METHODS: Whole exome sequencing (WES) was performed on all patients and their parents, followed by Sanger sequencing validation. Bioinformatics tools were used to provide supporting evidence for pathogenicity of variants. To confirm that a mutation is de novo, paternity test was carried out. High resolution melting curve analysis was performed to assess the allele frequency in normal controls for mutations that were found in the patients.

    RESULTS: The patients showed typical characteristics of HR including lower limb deformity, hypophosphatemia, and elevated alkaline phosphatase. WES revealed two variants in the PHEX gene and one variant in the dentin matrix protein 1 (DMP1) gene. Two of the three variants were novel, including c.1946_1954del (p.Gly649_Arg651del) in PHEX and c.54 + 1G > A in DMP1. Our data suggests that the novel p.Gly649_Arg651del variant is likely pathogenic for HR disease.

    CONCLUSIONS: This study extends the variant spectrum of the PHEX and DMP1 genes. Our findings indicate that WES is an advantageous approach for diagnosis of genetic diseases which are heterogeneous.

    Matched MeSH terms: Phosphates*
  2. Tuygunov N, Khairunnisa Z, Yahya NA, Aziz AA, Zakaria MN, Israilova NA, et al.
    Dent Mater J, 2024 Jan 30;43(1):1-10.
    PMID: 38220163 DOI: 10.4012/dmj.2023-132
    This systematic review investigates the effectiveness of calcium and phosphate ions release on the bioactivity and remineralization potential of glass ionomer cement (GIC). Electronic databases, including PubMed-MEDLINE, Scopus, and Web of Science, were systematically searched according to PRISMA guidelines. This review was registered in the PROSPERO database. Five eligible studies on modifying GIC with calcium and phosphate ions were included. The risk of bias was assessed using the RoBDEMAT tool. The incorporation of these ions into GIC enhanced its bioactivity and remineralization properties. It promoted hydroxyapatite formation, which is crucial for remineralization, increased pH and inhibited cariogenic bacteria growth. This finding has implications for the development of more effective dental materials. This can contribute to improved oral health outcomes and the management of dental caries, addressing a prevalent and costly oral health issue. Nevertheless, comprehensive longitudinal investigations are needed to evaluate the clinical efficacy of this GIC's modification.
    Matched MeSH terms: Phosphates
  3. REID JA, LIM CS
    Med J Malaya, 1959 Mar;13(3):239-42.
    PMID: 13666192
    Matched MeSH terms: Phosphates*
  4. Harun, S.W., Hofmann, P., Schulzgen, A., Li, L., Peyghambarian, N., Ahmad, H.
    ASM Science Journal, 2008;2(2):149-152.
    MyJurnal
    A distributed feedback fibre laser made of highly Er-Yb co-doped phosphate glass fibre was demonstrated experimentally. The 45 mm long fibre laser device operated at 1540 nm with more than 50 dB side mode suppression ratio. However, the output power was still relatively lower due to un-optimized grating structure and thermal management.
    Matched MeSH terms: Phosphates
  5. Farrah-Hani, I., Mohamed Sam-Aan, H., K., Enda, Srijit D.
    Medicine & Health, 2020;15(2):321-326.
    MyJurnal
    Lecuran tar, walaupun dikelaskan sebagai kecederaan kimia, disebabkan oleh perbezaan mekanisma kecederaan dan kesukaran untuk mengeluarkan agen daripada kulit tanpa menyebabkan kerosakan kulit dengan lebih lanjutnya, merupakan satu masalah yang sukar untuk diselesaikan. Terutamanya, apabila pesakit pediatrik terlibat. Lecuran tar biasanya merupakan kecederaan pekerjaan dan kebanyakannya berlaku kepada lelaki dewasa. Dua kes dibentangkan di sini, seorang budak lelaki berusia enam tahun dan seorang gadis berusia 15 tahun yang mengalami luka lecuhan tar dan berjaya dirawat dengan menggunakan enema minyak mineral Fleet® dan paraffin tulle Bactigras®, yang mudah didapati di kebanyakan hospital.
    Matched MeSH terms: Phosphates
  6. Song J, Cha L, Sillanpää M, Sainio T
    Water Sci Technol, 2023 Apr;87(7):1672-1685.
    PMID: 37051790 DOI: 10.2166/wst.2023.083
    Excessive phosphorus causes eutrophication problems. The adsorptive removal of phosphate is prevalent and practical in large-scale applications, such as column adsorption. A metal organic framework (MOF)-enhanced layered double hydroxide (LDH) adsorbent material was developed and studied for batch adsorption and then combined with polyacrylonitrile (PAN) to form MOF/LDH/PAN composite beads working as a functional material for columns. Scanning electron microscopy (SEM) images showed the well-dispersed adsorbent powder in porous composite beads. The Fowler-Guggenheim isotherm model described the phosphate adsorption behavior of the MOF/LDH powder with a maximum capacity of 74.96 mg P/g. Mass transfer in the composite beads was successfully described with the Fickian diffusion model. The composite-packed fixed bed treated 37.95 BVs of the influent (55.51 mg P/L phosphate solution) and achieved an uptake of 18.92 mg P/g, with a removal efficiency of 96.42%, before the breakthrough point in the column study. The phosphate-loaded composite bed was regenerated with 0.1 M NaOH to 70% efficiency within 30 BVs. The polymer composite can be considered a practical solution for adsorption-based water treatment applications in tank and column processes where powder adsorbents cannot be applied.
    Matched MeSH terms: Phosphates
  7. Tariq U, Hussain R, Tufail K, Haider Z, Tariq R, Ali J
    Mater Sci Eng C Mater Biol Appl, 2019 Oct;103:109863.
    PMID: 31349467 DOI: 10.1016/j.msec.2019.109863
    Quick setting and poor injectability due to liquid-solid phase separation have limited the clinical use of brushite and monetite cements. The presence of certain ions in the cement during the setting reaction moderate the setting time and properties of the cement. This study reports the preparation of injectable bone cement by using biphasic calcium phosphate (BCP) extracted from femur lamb bone by calcination at 1450 °C. EDX analysis infers the presence of Mg and Na ions as trace elements in BCP. X-ray diffraction patterns of the prepared cement confirmed the formation of brushite (DCPD) along with monetite (DCPA) as a minor phase. DCPA phase diminished gradually with a decrease in powder to liquid ratio (PLR). Initial and final setting time of 5.3 ± 0.5 and 14.67 ± 0.5 min respectively are obtained and within the acceptable recommended range for orthopedic applications. Exceptional injectability of ≈90% is achieved for all prepared bone cement samples. A decrease in compressive strength was observed with increase in the liquid phase of the cement, which is attributed to the higher degree of porosity in the set cement. Immersion of bone cement in simulated body fluid (SBF) for up to 7 days resulted in the formation of apatite layer on the surface of cement with Ca/P ratio 1.71, which enhanced the compressive strength from 2.88 to 9.15 MPa. The results demonstrate that bone cement produced from BCP extracted from femur lamb bone can be considered as potential bone substitute for regeneration and repair of bone defects.
    Matched MeSH terms: Calcium Phosphates/chemistry*
  8. Mironov N, Haque M, Atfi A, Razzaque MS
    Nutrients, 2022 Oct 25;14(21).
    PMID: 36364739 DOI: 10.3390/nu14214477
    Phosphorus is one of the most abundant minerals in the human body. It is essential for almost all biochemical activities through ATP formation, intracellular signal transduction, cell membrane formation, bone mineralization, DNA and RNA synthesis, and inflammation modulation through various inflammatory cytokines. Phosphorus levels must be optimally regulated, as any deviations may lead to substantial derangements in glucose homeostasis. Clinical studies have reported that hyperphosphatemia can increase an individual's risk of developing metabolic syndrome. High phosphate burden has been shown to impair glucose metabolism by impairing pancreatic insulin secretion and increasing the risk of cardiometabolic disorders. Phosphate toxicity deserves more attention as metabolic syndrome is being seen more frequently worldwide and should be investigated further to determine the underlying mechanism of how phosphate burden may increase the cardiometabolic risk in the general population.
    Matched MeSH terms: Phosphates/metabolism
  9. Curren E, Leaw CP, Lim PT, Leong SCY
    Environ Sci Pollut Res Int, 2022 Nov;29(52):78178-78206.
    PMID: 36190622 DOI: 10.1007/s11356-022-23096-4
    Moorena producens is a benthic filamentous cyanobacteria that has been widely documented for its toxicity. This cyanobacterium colonizes both temperate (37%) and tropical (63%) regions, making it a cosmopolitan cyanobacterium with a global distribution. M. producens grows across coral reefs in multiple locations but recurringly blooms in Queensland, Australia. Today, nuisance blooms of M. producens have resulted in major disruptions to recreational activities along coastal areas and are known to cause adverse effects on organism and human health upon contact or ingestion. Specifically, marine organisms such as the green turtle Chelonia mydas and hawksbill turtle Eretmochelys imbricata were fatally poisoned by M. producens after consumption of this cyanobacterium. Reports record a range of effects on human health, from pain and blistering or even death upon ingestion of contaminated seafood. Blooms of M. producens are triggered by influxes of nitrogen, phosphate and iron, from surrounding coastal runoffs or sewage effluents. Additions of these nutrients can result in an increase in growth rate by 4-16 times. Iron bioavailability also plays a crucial role in bloom formation. A total of 231 natural products from 66 groups were identified from M. producens, with the three dominant groups: malyngamides, microcolins and dolastatins. These bioactive secondary metabolites have displayed toxicities against a range of carcinoma cell lines and organisms such as brine shrimp Artemia salina and goldfish Carassius auratus. This review provides a thorough insight to the distribution, ecophysiology and toxicity of M. producens, with reports on bloom events and implications on organism and human health.
    Matched MeSH terms: Phosphates/metabolism
  10. Sofia Beagem Mohd Noal, Roslinda Shamsudin, Tan, Lee Phin, Wan Khartini Wan Abdul Khodir
    MyJurnal
    Hydroxyapatite (HA) powder was synthesized via wet method using calcium nitrate hydrate (Ca(NO3)2.H2O) and diammonium hydrogen phosphate ((NH4)2HPO4) as raw materials. Powder obtained was milled using various milling speed ranging from 250 to 400 r.p.m. and sintered at 1300°C for 2hrs. Due to the nature of HA powder that decomposed at high temperature, XRD technique have been used in this work to determine the phase composition of the HA powder and also the crystallite size. The unmilled sample was used as the control group. Results show that sufficient heat supply generated from the milling process, initiates the decomposition of HA phase into ȕ-tricalcium phosphate (ȕ-TCP). Decomposition of HA starts to occur at the milling speed of 300 rpm, i.e the formation of ȕ-TCP was occurred at lower sintering temperature. It was believed that the decomposition of HA was associated with the formation of an intermediate phase, oxyapatite. Moreover, the crystallinity and particle size of the produced powder is very much affected by the milling speed and the stability of the HA. All milled powders possess spherical shape particle.
    Matched MeSH terms: Calcium Phosphates; Phosphates
  11. A. Tang, S.K. Wong, O.H. Ahmed, N.M. Majid
    ASM Science Journal, 2013;7(1):23-26.
    MyJurnal
    Widespread deforestation has resulted in soil degradation that is often linked to environmental and ecological changes. Rehabilitation of degraded forest is essential to prevent further degradation of the soil. Abundance of soil microbiota could serve as an essential biological indicator of soil health for rehabilitation success. An investigation was conducted to study the relationship between cellulolytic, nitrogen-fixing and phosphate-solubilizing microbial counts and age of rehabilitated forest. A random sampling design was used to obtain four replicates of five composite soil of 0–10 cm depth soil samples of 4, 9, 14 and 19-year-old rehabilitated forest. Three selective media: Congo red cellulose, nitrogen-free malate and calcium phosphate media were used for the enumerations of cellulolytic, nitrogen-fixing and phosphate-solubilizing microbes, respectively. Cellulolytic and phosphate-solubilizing microbes were counted based on the formation of clearing zones, while nitrogen-fixing microbes were based on the formation of blue halo on the respective media. There was positive linear relationship between age of the rehabilitated forest and microbial count. These findings revealed that the potentials of cellulolytic, nitrogen-fixing and phosphate-solubilizing microbial populations could be used as biological indicators of forest soil rehabilitation.
    Matched MeSH terms: Calcium Phosphates; Phosphates
  12. Taha A, Akram M, Jawad Z, Alshemary AZ, Hussain R
    Mater Sci Eng C Mater Biol Appl, 2017 Nov 01;80:93-101.
    PMID: 28866230 DOI: 10.1016/j.msec.2017.05.117
    Microwave assisted wet precipitation method was used to synthesize calcium deficient strontium doped β-tricalcium phosphate (Sr-βTCP) with a chemical formula of Ca2.96-xSrx(PO4)2. Sr-βTCP was reacted with monocalcium phosphate monohydrate [Ca(H2PO4)2.H2O, MCPM] in presence of water to furnish corresponding Sr containing brushite cement (Sr-Brc). The samples were characterized by using X-ray diffractometry (XRD), Fourier transform infrared spectroscopy (FTIR) and field emission scanning electron microscopy (FESEM). Strontium content in the prepared samples was determined by using inductively coupled plasma optical emission spectrometry (ICP-OES). The effect of Sr2+ions on the structural, mechanical, setting properties and drug release of the cement is reported. Incorporation of Sr2+ions improved the injectability, setting time and mechanical properties of the Brc. The release profiles of antibiotics incorporated in Brc and Sr-Brc confirmed that the Sr incorporation into the Brc results in the efficient release of the antibiotics from the cement.
    Matched MeSH terms: Calcium Phosphates
  13. Watts MP, Gan HM, Peng LY, Lê Cao KA, Moreau JW
    Environ Sci Technol, 2017 Nov 21;51(22):13353-13362.
    PMID: 29064247 DOI: 10.1021/acs.est.7b04152
    Thiocyanate (SCN-) is a contaminant requiring remediation in gold mine tailings and wastewaters globally. Seepage of SCN--contaminated waters into aquifers can occur from unlined or structurally compromised mine tailings storage facilities. A wide variety of microorganisms are known to be capable of biodegrading SCN-; however, little is known regarding the potential of native microbes for in situ SCN- biodegradation, a remediation option that is less costly than engineered approaches. Here we experimentally characterize the principal biogeochemical barrier to SCN- biodegradation for an autotrophic microbial consortium enriched from mine tailings, to arrive at an environmentally realistic assessment of in situ SCN- biodegradation potential. Upon amendment with phosphate, the consortium completely degraded up to ∼10 mM SCN- to ammonium and sulfate, with some evidence of nitrification of the ammonium to nitrate. Although similarly enriched in known SCN--degrading strains of thiobacilli, this consortium differed in its source (mine tailings) and metabolism (autotrophy) from those of previous studies. Our results provide a proof of concept that phosphate limitation may be the principal barrier to in situ SCN- biodegradation in mine tailing waters and also yield new insights into the microbial ecology of in situ SCN- bioremediation involving autotrophic sulfur-oxidizing bacteria.
    Matched MeSH terms: Phosphates
  14. Syafiqa Hayati Mohd Ali, Norazlina Ahmad, Khairul Adzfa Radzun
    MyJurnal
    This study describes the adaptations of diatoms, Cylindrotheca fusiformis and other marine diatoms, in a new formulated enriched medium Tris-phosphate seawater (TP-SW). The medium was designed to maintain long-term cultures of wide-range marine diatoms in laboratory that produces high biomass of cultures. The diatoms were adapted and cultivated in the medium for 15 days and the number of cells was recorded daily. It was found that the number of cells declined after two weeks indicating death phase of the cells. This indicates that the TP-SW medium has supported the growth of diatoms during the period and can be used to cultivate diatoms in vitro. Studies on the TP-SW medium must be done to obtain optimal medium that can provide not only a conducive environment for the survival of diatoms but also high biomass production.
    Matched MeSH terms: Phosphates
  15. Nor Farahim Aziz, Wan Lutfi Wan Johari, Mohd Izuan Effendi Halmi
    MyJurnal
    The conversion of hexavalent molybdenum (Mo (VI)) to Mo-blue is a bioremediation technique
    which reduces the toxicity of molybdenum to a less toxic form by bacteria. The aim of this study
    is to determine the optimum conditions of significant parameters or variables that affect the
    reduction of Mo (VI) to Mo-blue by the local isolate identified as Serratia sp. strain MIE2.
    Response Surface Methodology (RSM) was used in this study to optimize the reduction process
    using Central Composite Design (CCD) as an optimization matrix. The optimum conditions
    predicted by RSM using the desirability function for the reduction process were 20 mM
    molybdate concentration, 3.95 mM phosphate, 6.25 pH and 25 g/L glucose and Mo-blue
    production occurred at the absorbance value of 20.5 at 865 nm. The validation of the predicted
    optimum points showed the Mo-blue production occurred at the absorbance value of 21.85 with
    a deviation around 6.6 % from the RSM predicted value.
    Matched MeSH terms: Phosphates
  16. Udenni Gunathilake TMS, Ching YC, Ching KY, Chuah CH, Abdullah LC
    Polymers (Basel), 2017 Apr 29;9(5).
    PMID: 30970839 DOI: 10.3390/polym9050160
    Extensive employment of biomaterials in the areas of biomedical and microbiological applications is considered to be of prime importance. As expected, oil based polymer materials were gradually replaced by natural or synthetic biopolymers due to their well-known intrinsic characteristics such as biodegradability, non-toxicity and biocompatibility. Literature on this subject was found to be expanding, especially in the areas of biomedical and microbiological applications. Introduction of porosity into a biomaterial broadens the scope of applications. In addition, increased porosity can have a beneficial effect for the applications which exploit their exceptional ability of loading, retaining and releasing of fluids. Different applications require a unique set of pore characteristics in the biopolymer matrix. Various pore morphologies have different characteristics and contribute different performances to the biopolymer matrix. Fabrication methods for bio-based porous materials more related to the choice of material. By choosing the appropriate combination of fabrication technique and biomaterial employment, one can obtain tunable pore characteristic to fulfill the requirements of desired application. In our previous review, we described the literature related to biopolymers and fabrication techniques of porous materials. This paper we will focus on the biomedical and microbiological applications of bio-based porous materials.
    Matched MeSH terms: Calcium Phosphates
  17. Razali SA, Shamsir MS
    J Mol Graph Model, 2020 06;97:107548.
    PMID: 32023508 DOI: 10.1016/j.jmgm.2020.107548
    Xylitol is a high-value low-calorie sweetener used as sugar substitute in food and pharmaceutical industry. Xylitol phosphate dehydrogenase (XPDH) catalyses the conversion of d-xylulose 5-phosphate (XU5P) and d-ribulose 5-phosphate (RU5P) to xylitol and ribitol respectively in the presence of nicotinamide adenine dinucleotide hydride (NADH). Although these enzymes have been shown to produce xylitol and ribitol, there is an incomplete understanding of the mechanism of the catalytic events of these reactions and the detailed mechanism has yet to be elucidated. The main goal of this work is to analyse the conformational changes of XPDH-bound ligands such as zinc, NADH, XU5P, and RU5P to elucidate the key amino acids involved in the substrate binding. In silico modelling, comparative molecular dynamics simulations, interaction analysis and conformational study were carried out on three XPDH enzymes of the Medium-chain dehydrogenase (MDR) family in order to elucidate the atomistic details of conformational transition, especially on the open and closed state of XPDH. The analysis also revealed the possible mechanism of substrate specificity that are responsible in the catalyse hydride transfer are the residues His58 and Ser39 which would act as the proton donor for reduction of XU5P and RU5P respectively. The structural comparison and MD simulations displayed a significant difference in the conformational dynamics of the catalytic and coenzyme loops between Apo and XPDH-complexes and highlight the contribution of newly found triad residues. This study would assist future mutagenesis study and enzyme modification work to increase the catalysis efficiency of xylitol production in the industry.
    Matched MeSH terms: Phosphates
  18. Zhang K, Teng Z, Shao W, Wang Y, Li M, Lam SS
    J Hazard Mater, 2020 10 05;397:122754.
    PMID: 32361140 DOI: 10.1016/j.jhazmat.2020.122754
    Phosphate solubilizing bacteria (PSBs) shows high potential to be used for lead passivation in sediments due to the abilities of releasing phosphate and the subsequent formation of insoluble Pb-phosphate compounds. In this research, microbial capsules implemented with sodium alginate and CaCl2, containing Leclercia adecarboxylata L15 (a lead resistant PSB) and Ca3(PO4)2, were developed and the performance on lead passivation under different conditions was examined. The optimal concentrations of sodium alginate and CaCl2 for formulating the capsules were determined to be 0.3% and 10%, respectively. The removal efficiency of Pb2+ by capsules containing L15 and Ca3(PO4)2 was up to 98% with a capsule dosage of 2%, initial Pb2+ concentration of 1mM and pH of 3.0, which was better than that of free L15 (18%) and capsules containing only L15 (34%). Lead was immobilized via the formation of Pb5(PO4)3Cl on the surface and Pb3(PO4)2 in the interior of the capsules. The simulated sediment remediation experiments showed that the acid soluble fraction of lead reduced from 28% to 14% and transformed into more stable fractions after 10 days. The experiment results indicated that PSBs capsules coupled with phosphate materials have a great promise for application in remediation of lead contaminated sediments.
    Matched MeSH terms: Calcium Phosphates
  19. Trache D, Hussin MH, Haafiz MK, Thakur VK
    Nanoscale, 2017 Feb 02;9(5):1763-1786.
    PMID: 28116390 DOI: 10.1039/c6nr09494e
    Cellulose nanocrystals, a class of fascinating bio-based nanoscale materials, have received a tremendous amount of interest both in industry and academia owing to its unique structural features and impressive physicochemical properties such as biocompatibility, biodegradability, renewability, low density, adaptable surface chemistry, optical transparency, and improved mechanical properties. This nanomaterial is a promising candidate for applications in fields such as biomedical, pharmaceuticals, electronics, barrier films, nanocomposites, membranes, supercapacitors, etc. New resources, new extraction procedures, and new treatments are currently under development to satisfy the increasing demand of manufacturing new types of cellulose nanocrystals-based materials on an industrial scale. Therefore, this review addresses the recent progress in the production methodologies of cellulose nanocrystals, covering principal cellulose resources and the main processes used for its isolation. A critical and analytical examination of the shortcomings of various approaches employed so far is made. Additionally, structural organization of cellulose and nomenclature of cellulose nanomaterials have also been discussed for beginners in this field.
    Matched MeSH terms: Calcium Phosphates
  20. Ng, X.Y., Huda, N.
    MyJurnal
    The effects of washing treatments and washing cycles on the thermal gelation properties and quality
    characteristics of duckrimi (duck-base surimi-like material) were evaluated. Minced spent layer duck (4.5 mm orifice diameter) were washed by using either tap water, 0.1M NaCl, 0.5% NaHCO3 and 0.04M sodium phosphate in one, two or three washing cycles, respectively. Washing with 0.04M sodium phosphate in three washing cycles significantly increased (P
    Matched MeSH terms: Phosphates
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links