Termites encompass a various range of destruction of crops and capable of decomposing woods. The widely being used of hazardous chemical pesticides has develop many health problems to the users. Hence, the aim of this study was to substitute the use of hazardous chemical pesticides to herbs based pesticides as repellent agent against rubber termites (Coptotermes curvignathus), which is safer and easier to use. The selected herbs species for this study are lemongrass (Cymbopogon citratus), garlic (Allium sativum) and wild mint (Mentha arvensis). As for C.curvignathus, they were obtained from Forest Research Institute Malaysia (FRIM), Kepong, Selangor, Malaysia. Khaya wood (Khaya senegalensis) (3cm x 2cm x 2cm) is the woods sample that being used. All woods samples were treated with all the selected herbs extract. The repellent testing was conducted for 21 days. The result obtained showed that the three herbs were effective to be used as repellent when compared to percentage weight loss of control, which is 23.58%. The percentages of weight loss of treated groups using aqueous extraction of herbs were 0.61% (lemongrass), 1.56% (mint), and 1.72% (garlic), whereas for methanol extraction of herbs were 0.52% (lemongrass), 1.13% (mint) and 1.55% (garlic). From Analysis of Variance (ANOVA), there is significant different in mean among group with F=275.49, p- value=0.000
The relationship between greenhouse gas emission and climate change has led to research to identify and manage the natural sources and sinks of the gases. CO2, CH4, and N2O have an anthropic source and of these CO2 is the least effective in trapping long wave radiation. Soil carbon sequestration can best be described as a process of removing carbon dioxide from the atmosphere and relocating into soils in a form that is not readily released back into the atmosphere. The purpose of this study is to estimate carbon stocks available under current conditions in Sarawak, Malaysia. SOC estimates are made for a standard depth of 100 cm unless the soil by definition is less than this depth, as in the case of lithic subgroups. Among the mineral soils, Inceptisols tend to generally have the highest carbon contents (about 25 kg m(-2) m(-1)), while Oxisols and Ultisols rate second (about 10-15 kg m(-2) m(-1)). The Oxisols store a good amount of carbon because of an appreciable time-frame to sequester carbon and possibly lower decomposition rates for the organic carbon that is found at 1m depths. Wet soils such as peatlands tend to store significant amounts of carbon. The highest values estimated for such soils are about 114 kg m(-2) m(-1). Such appreciable amounts can also be found in the Aquepts. In conclusion, it is pertinent to recognize that degradation of the carbon pool, just like desertification, is a real process and that this irreversible process must be addressed immediately. Therefore, appropriate soil management practices should be instituted to sequester large masses of soil carbon on an annual basis. This knowledge can be used effectively to formulate strategies to prevent forest fires and clearing: two processes that can quickly release sequestered carbon to the atmosphere in an almost irreversible manner.
Sweet basil (Ocimum basilicum L.) is a very important food additive as well as for its therapeutic and cosmetic potential. The composition of essential oils in plants is affected by genetics and environmental conditions, which is determined by growth region and harvesting time in terms of ontogenetical variability. This study was carried out to assess the effect of plant ontogeny (pre-flowering, at flowering, fruiting) on essential oil content and chemical constituents for four sweet basil cultivated under irrigation conditions in the experimental farm of the National Oilseed Processing Research Institute (NOPRI), University of Gezira, Sudan. The essential oils were hydro-distilled from the leaves using Clevenger apparatus and the chemical constituents were determined by GC-MS. The results reveal that the essential oil yield content ranged from 0.1% to 0.2% at pre-flowering stage, whereas the oil content obtained at post-flowering stage was 0.1% for the investigated accessions. The highest essential oil content was recorded at flowering stage (0.2-0.5%), where the two Sudanese accessions had the maximum content (0.5%). The major chemical constituents, linalool, citral, methyleugenol, and eucalyptol reported at different developmental stages, punctuated between 5.73% and 32.93% in the four investigated accessions.
Introduction: Heavy metals and other contaminants in food have been a concern to food industries, consumers and governing authorities. The purpose of this study was to determine the levels of heavy metals and other elements in edible bird nests (EBNs). Methods: Raw and processed (commercial) EBNs were used in the study. Raw EBNs were collected directly from five house farms in Peninsular Malaysia - Kuala Sanglang (Kedah), Pantai Remis (Perak), Kluang Gohor), Kota Bharu (Kelantan) and Kajang (Selangor). Processed EBNs were pmchased from five Chinese traditional medicinal shops located in Peninsular Malaysia. The levels of 32 elements were determined by inductively coupled plasma-mass spectrometry and findings of the study were compared to the maximum regulatory limits set by the Standards and Industrial Research Institute of Malaysia (SIRIM) for EBNs. Results: Of the seven elements with maximum regulatory limits (As, Cd, Pb, Hg, Sn, Cu, Fe), one raw EBN was detected with mercury level of 70.180 ppb which was above the SIRIM permissible limit of 50 ppb. All the EBNs had iron levels above the SIRIM permissible limit of 30 ppb. The levels of the other 25 elements with no maximum regulatory limits (Ca, Mg, Na, K, P, Co, Cr, Mn, Mo, Se, Zn, Ag, Ba, Be, Bi, B, Li, Ni, Sb, Sr, Ti, U, V, Al, Zr) were also determined. Conclusion: The data obtained for the 25 elements with no permissible limits can serve as baseline data for further studies to establish their maximum regulatory limits.
Introduction: High sodium consumption over an extended period of time has been associated with hypertension, stroke, cardiovascular disease, renal damage, and other adverse health effects. This study aimed to determine urinary sodium excretion and consequently estimate dietary sodium consumption among normotensive health staff in Malaysia. Methods: A cross-sectional study was conducted to acquire data on sodium excretion among normotensive Ministry of Health staff aged 20 - 56 years (mean age 35.08, SD 9.78) in 14 states and a research institute. Respondents were recruited using quota sampling. Data collection was conducted from December 2011 to February 2012. A single urine sample was collected over 24 hours for sodium concentrations and calculated as 95.0% of total daily sodium intake. Results: Among the 471 enrolled respondents, 445 (94.0%) provided complete information on socio-demography and urine samples. Mean urine sodium excretion was 142.0 mmol/day (SD 71.7), which is equivalent to 3429 mg sodium/day or 8.7 gm of salt intake (1.75 teaspoon, which exceeds the Malaysian recommendation of 2000 mg sodium/day by 1.7 times. About 79.0% (n=353) of respondents (88.0% male and 73.0% female) had daily sodium consumption that was above the recommendation. Excretion was significantly higher among males at 161.7 mmol/day (SD 78.1) (3726 mg sodium/day) than females, 125.3 mmolfday (SD 61.1) (2875 mg/day). There was a positive, low correlation between BMl and sodium intake (r=0.216, p
In Malaysia, all sectors are currently gearing themselves in supporting the initiatives of becoming a developed nation by the year 2020. The most important element in ensuring the success of this mission is to provide critical mass of knowledge workers to champion this cause. As such the Ministry of Higher Education Malaysia (MOHE) has established the National Higher Education Strategic Plan (NHESP), comprising seven thrusts which are very crucial in providing the much needed human capital and eco-system for this agenda. The essence of NHESP is also in line with other initiatives established by the government of Malaysia such as the National Key Results Area (NKRA) and the Government Transformation Plan (GTP). In fact MOHE has developed a systematic working model for the academia to play their role actively in driving the agenda of transforming Malaysia into a developed nation. The workforce required to spearhead the agenda for an innovation-led economy can be categorized into five different groups namely: Discoverers; Innovators; Inventors; Transformers; and Technopreneurs. It is very crucial for MOHE to develop and implement a comprehensive programme for producing a new breed of researchers that can contribute in translating government policies into a reality. This article presents the challenges and success stories in reforming the landscape of Research and Development in Malaysian universities and research institutions. The establishment of NHESP has made it possible for MOHE to systematically establish comprehensive guidelines for the management of research grants, standard for research conduct, instrument to measure research performance, and standardized reporting of research and innovation output. This new approach in the management of research at the ministry level has created positive ramifications for universities, research institutions, research management centres, and research leaders. During the first five-year cycle (2006-2010) of these research initiatives, and now into the second phase (2011-2015), positive results and outcomes have started to emerge. These results include increased in generation of articles on research findings published in reputable journals worldwide. Currently, Malaysia is recognized for achieving the world's fastest growth rate in number of journal publications. In addition, increased in number of postgraduate students, commercialization of R&D products and the establishment of Higher Institutions Centres of Excellence (HiCOE) contribute towards producing a new breed of great researchers in Malaysia. A continuing positive trend indicates that this phenomenal growth will be sustained for the next few years.
Conference abstracts: Malaysia in affiliation
(1). PO-211. AGE-SPECIFIC STRESS-MODULATED
CHANGES OF SPLENIC IMMUNOARCHITECTURE
IN THE GROWING BODY. Marina Yurievna Kapitonova, Syed Baharom Syed Ahmad Fuad, Flossie Jayakaran; Faculty of Medicine, Universiti Teknologi MARA, Shah Alam, Malaysia
syedbaharom@salam.uitm.edu.my
(2). PO-213. A DETAILED OSTEOLOGICAL STUDY OF THE ANOMALOUS GROOVES NEAR THE
MASTOID NOTCH OF THE SKULL. ISrijit Das, 2Normadiah Kassim, lAzian Latiff, IFarihah Suhaimi, INorzana Ghafar, lKhin Pa Pa Hlaing, lIsraa Maatoq, IFaizah Othman; I Department of Anatomy, Universiti Kebangsaan Malaysia, Kuala Lumpur, Malaysia; 2 Department of Anatomy, Universiti Malaya, Kuala Lumpur, Malaysia. das_sri jit23@rediffmail.com
(3). PO-21S. FIRST LUMBRICAL MUSCLE OF THE
PALM: A DETAILED ANATOMICAL STUDY WITH
CLINICAL IMPLICATIONS. Srijit Das, Azian Latiff, Parihah Suhaimi, Norzana Ghafar, Khin Pa Pa Hlaing, Israa Maatoq, Paizah Othman; Department of Anatomy, Universiti Kebangsaan Malaysia, Kuala Lumpur, Malaysia. das_srijit23@rediffmail.com
(4). PO-336. IMPROVEMENT IN EXPERIMENTALLY
INDUCED INFRACTED CARDIAC FUNCTION
FOLLOWING TRANSPLANTATION OF HUMAN
UMBILICAL CORD MATRIX-DERIVED
MESENCHYMAL CELLS. lSeyed Noureddin Nematollahi-Mahani, lMastafa Latifpour, 2Masood Deilami, 3Behzad Soroure-Azimzadeh, lSeyed
Hasan Eftekharvaghefi, 4Fatemeh Nabipour, 5Hamid
Najafipour, 6Nouzar Nakhaee, 7Mohammad Yaghoobi, 8Rana Eftekharvaghefi, 9Parvin Salehinejad, IOHasan Azizi; 1 Department of Anatomy, Kerman University of Medical Sciences, Kerman, Iran; 2 Department of Cardiosurgery, Hazrat-e Zahra Hospital, Kerman, Iran; 3 Department of Cardiology, Kerman University of Medical Sciences, Kerman, Iran; 4 Department of Pathology, Kerman University of Medical Sciences, Kerman, Iran; 5 Department of Physiology, Kerman University of Medical Sciences, Kerman, Iran; 6 Department of Neuroscience Research Center, Kerman University of Medical Sciences, Kerman, Iran; 7 Department
of Biotechnology, Research Institute of Environmental Science, International Center for Science, High Technology & Environmental Science, Kerman, Iran; 8 Students Research Center, Kerman University of Medical Sciences, Kerman, Iran; 9 Institute of Bioscience, University Putra Malaysia,
Kuala Lumpur, Malaysia; 10 Department of Stem Cell, Cell Science Research Center, Royan Institute, ACECR, Tehran, Iran. nnematollahi@kmu.ac.ir
(5).
Five improved Nigerian barley cultivars (ESCOBA, ASE – 2, ALOE, GOB – 2, SUMBARD) were obtained from Lake Chad Research Institute Maiduguri, Nigeria, and their physicochemical, malting and biochemical properties investigated employing standard procedures. Data were analyzed by means of ANOVA [at 95% significant level] and correlations using SPSS 14 software. Results showed GOB-2 grain and malt recording the highest kernel weight (47.50 g) and kernel volume (41.21 ml); whereas ALOE grain had the longest kernel length (13.40 mm) and GOB-2 the shortest (9.40 mm). GOB-2 had the largest major diameter (3.39 mm) and SUMBARD had the least (2.86 mm). ESCOBA, SUMBARD and ASE-2 cultivars had the highest protein values (as %N) of 14.90%, 13.90% and 13.69% respectively, while ALOE, ASE-2 and GOB-2 had the highest total carbohydrates of 69.97, 69.39 and 68.90% respectively. All the cultivars had good germinative capacities (> 90%), with GOB-2 and ASE-2 having the highest germinative energy values of 96.65% and 95.00%. No significant (p > 0.05) changes
in the dimension of the kernels after malting. SUMBARD recorded the highest malt yields (88.55%) followed by ASE-2 (83.45%) and ALOE (82.00%). The highest α-amylase activities of 105.34 and 96.23 unit/mg protein/min were recorded by ASE-2 and ALOE, respectively, with corresponding diastatic powers of 81.92 and 76.23oL. Thousand kernel weight correlated positively with protein (r = 0.500, P < 0.05) and with total soluble solids (r = 0.435, p < 0.05) but negatively with α-amylase (r = -0.869, p < 0.05) and with diastatic power (r = -0.838, p < 0.05). This study showed that the cultivars have good potentials for use as malting materials in beverage making.
Bacillus anthracis is a bacterial pathogen of major concern. The spores of this bacteria can survive harsh environmental conditions for extended periods and are well recognized as a potential bioterror weapon with significant implications. Accurate and timely identification of this Bacillus species in the diagnostic laboratory is essential for disease and public health management. Biosafety Level 3 measures and ciprofloxacin treatment were instituted when B. anthracis was suspected from a patient with gangrenous foot. 16S rDNA sequencing was performed to accurately identify the suspected bacterium, due to the superiority of this method to accurately identify clinically isolated bacteria. B. megaterium was identified as the causative agent and the organism was subsequently treated as a Biosafety Level 2 pathogen.
Local exhaust ventilation (LEV) is used in industries to capture contaminants such as gases, dusts, mists, vapours or fumes out of workstations to protect occupants’ exposure to contaminants. LEV is allocated and installed by employers, however it doesn’t work accordingly. LEV design is often overlooked and underappreciated. Effectiveness of LEV system can be achieved if more attention is focused to proper design of LEV system. To solve this issue, computational fluid dynamics (CFD) can be performed. CFD is a software tool to predict and simulate fluid dynamic phenomena. CFD is used to forecast or reconstruct the behaviour of an engineering product under assumed or measure boundary conditions. However, CFD is just a prediction tool, which can lead to inaccuracy of predicting airflow due to problems with pre-processing, solver and post-processing with parameter from actual experimental results. Therefore, validation is needed to help minimizing percentage error of CFD methods. In this research, measurements of airflow parameter of LEV system at National Institute of Occupational Safety and Health (NIOSH) Bangi, Selangor were conducted. Control Speed panel found at NIOSH Bangi, which is used to increase or decrease speed of fan, was performed using Control Speed of 20%, 40% 60% and 80%. Upon validation, average absolute error obtained from four different control speeds ranges from 3.372% to 4.862%. Validity of CFD modelling is acceptable, which is less than 5% and good agreement is achieved between actual experimental results and CFD simulation results. Therefore, it can be concluded that CFD software tool can be performed to simulate air velocity in LEV system. CFD methods can save labour costs and time consumption when it is used during earliest stage of LEV design, before actual construction is implemented. The outcome of this paper can be used as a baseline for factories equipped with LEV system to protect occupants’ exposure to contaminants.
Over the years, the emphasis on research practices in healthcare has received more recognition than the emphasis on teaching practices. Also, in contrast to the strong focus on aligning care-giving practices with evidence of effectiveness; aligning educational practices with evidences of effectiveness has continued to be neglected. This creates a chasm that hinders the delivery of effective health practices. Many challenges in the current healthcare delivery system warrant a call for a revamp of health professionals' education, and for a greater focus in effective teaching, assessment and supervision. This paper highlights the current challenges in health professional education (as revealed by the Institute of Medicine, IOM, 2003). It focusses on five key issues for promoting teaching excellence, and supports the move for new lecturers to be educationally trained so that 'teaching for learning' becomes current, effective and enjoyable. More importantly, the vision for health professional education that "all health professionals are educated to deliver patient-centred-care as members of an interdisciplinary team, emphasising evidence-based practice, quality improvement approaches, and informatics" can be attained. This vision has important implication for medical lecturers as it means they have to be better educated to teach in order to be prepared to meet the demands of a reformed healthcare system.
If Malaysia is to become a high-income country by 2020, it will have to transform into a knowledge-based, innovation economy. This goal will be achieved by developing an atmosphere conducive to experimentation and entrepreneurship at home; while reaching out to partners across the globe. One of Malaysia's newest partnerships is with the New York Academy of Sciences. The Academy has expertise in innovation and higher education and a long history of promoting science, education, and science-based solutions through a global network of scientists, industry-leaders, and policy-makers. Malaysia's Prime Minister, Dato' Sri Mohd Najib Tun Abdul Razak, leveraged the Academy's network to convene a science, technology, and innovation advisory council. This council would provide practical guidance to establish Malaysia as an innovation-based economy. Three initial focus areas, namely palm-oil biomass utilisation, establishment of smart communities, and capacity building in science and engineering, were established to meet short-term and long-term targets.
Melioidosis is endemic in the South Asian regions, like Thailand, Singapore Malaysia and Australia. The disease is more pronounced in the southern part of the country. It is caused by Burkholderia pseudomallei which causes systemic involvement, morbidity and mortality associated with the disease is high. Due to highly varied clinical presentation, and low general awareness this infection is largely underdiagnosed and under reported in our country. Most laboratories in the country still rely on conventional culturing methods with their low sensitivity, adding to the under reporting. To enhance physician awareness we describe here two cases who presented to our institute after months of misdiagnosis.
The ability to objectify ballistic evidence is a challenge faced by firearms examiners around the world. A number of researchers are trying to improve bullet-identification systems to address deficiencies detailed within the National Academy of Science report (2009). More recently focus has turned to making use of more sophisticated imaging modalities to view entire regions of the projectile and the development of automated systems for the comparison of the topographical surfaces recorded. Projectiles from a newly bought air pistol with 0.177 calibre pellets (unjacketed), fired series of 609 pellets were examined using an optical microscope. A mathematical methodology was developed to pre-process the resultant topographical maps generating point data for comparison, analysed using the principal component analysis (PCA). In most cases limited to reasonable success was achieved. The objective method still requires an operator to identify the Land Engraved Areas to be scanned, however the mathematical alignments were objectively achieved. The PCA results illustrated that the striation marks were neither exclusive nor specific to the LEA regions but rather crossed over regions. This study also proves that a single weapon does not necessarily leave identical marks of projectiles on its surface.
High-energy electron (2.0 MV) and gamma irradiation (60Co) has been used to modify polymeric silicone fluids of initial viscosities in the range, 90-700 cSt. Doses of electron and gamma radiation were delivered at rates of 0.246 kGy s(-1) and 15 kGy h(-1), respectively, exposure times being adjusted to ensure energy deposition in the range 30-360 kGy. Measurements were made using a differential viscometer based on a Bose Institute design. In line with expectation, samples of greater initial molecular weight (and hence greater viscosity), were observed to be more susceptible to radiation induced cross-linking than those of lower molecular weight. The role of dose rate and oxygen diffusion in determining the extent of change is discussed.
Australian Academy of Sciences, Royal Flemish Academy of Belgium for Sciences and the Arts, Brazilian Academy of Sciences, Royal Society of Canada, Caribbean Academy of Sciences, Chinese Academy of Sciences, et al.