Refrigeration systems are complex, non-linear, multi-modal, and multi-dimensional. However, traditional methods are based on a trial and error process to optimize these systems, and a global optimum operating point cannot be guaranteed. Therefore, this work aims to study a two-stage vapor compression refrigeration system (VCRS) through a novel and robust hybrid multi-objective grey wolf optimizer (HMOGWO) algorithm. The system is modeled using response surface methods (RSM) to investigate the impacts of design variables on the set responses. Firstly, the interaction between the system components and their cycle behavior is analyzed by building four surrogate models using RSM. The model fit statistics indicate that they are statistically significant and agree with the design data. Three conflicting scenarios in bi-objective optimization are built focusing on the overall system following the Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) and Linear Programming Technique for Multidimensional Analysis of Preference (LINMAP) decision-making methods. The optimal solutions indicate that for the first to third scenarios, the exergetic efficiency (EE) and capital expenditure (CAPEX) are optimized by 33.4% and 7.5%, and the EE and operational expenditure (OPEX) are improved by 27.4% and 19.0%. The EE and global warming potential (GWP) are also optimized by 27.2% and 19.1%, where the proposed HMOGWO outperforms the MOGWO and NSGA-II. Finally, the K-means clustering technique is applied for Pareto characterization. Based on the research outcomes, the combined RSM and HMOGWO techniques have proved an excellent solution to simulate and optimize two-stage VCRS.
Locusts differ from ordinary grasshoppers in their ability to swarm over long distances and are among the oldest migratory pests. The ecology and biology of locusts make them among the most devastating pests worldwide and hence the calls for actions to prevent the next outbreaks. The most destructive of all locust species is the desert locust (Schistocerca gregaria). Here, we review the current locust epidemic 2020 outbreak and its causes and prevention including the green technologies that may provide a reference for future directions of locust control and food security. Massive locust outbreaks threaten the terrestrial environments and crop production in around 100 countries of which Ethiopia, Somalia and Kenya are the most affected. Six large locust outbreaks are reported for the period from 1912 to 1989 all being closely related to long-term droughts and warm winters coupled with occurrence of high precipitation in spring and summer. The outbreaks in East Africa, India and Pakistan are the most pronounced with locusts migrating more than 150 km/day during which the locusts consume food equivalent to their own body weight on a daily basis. The plague heavily affects the agricultural sectors, which is the foundation of national economies and social stability. Global warming is likely the main cause of locust plague outbreak in recent decades driving egg spawning of up to 2-400,000 eggs per square meter. Biological control techniques such as microorganisms, insects and birds help to reduce the outbreaks while reducing ecosystem and agricultural impacts. In addition, green technologies such as light and sound stimulation seem to work, however, these are challenging and need further technological development incorporating remote sensing and modelling before they are applicable on large-scales. According to the Food and Agriculture Organization (FAO) of the United Nations, the 2020 locust outbreak is the worst in 70 years probably triggered by climate change, hurricanes and heavy rain and has affected a total of 70,000 ha in Somalia and Ethiopia. There is a need for shifting towards soybean, rape, and watermelon which seems to help to prevent locust outbreaks and obtain food security. Furthermore, locusts have a very high protein content and is an excellent protein source for meat production and as an alternative human protein source, which should be used to mitigate food security. In addition, forestation of arable land improves local climate conditions towards less precipitation and lower temperatures while simultaneously attracting a larger number of birds thereby increasing the locust predation rates.
The environment sustenance and preservation of global climate are known as the crucial issues of the world today. Currently, the crisis of global warming due to CO2 emission has turned into a paramount concern. To address such a concern, diverse CO2 capture and sequestration techniques (CCS) have been introduced so far. In line with this, Metal Organic Frameworks (MOFs) have been considered as the newest and most promising material for CO2 adsorption and separation. Due to their outstanding properties, this new class of porous materials a have exhibited a conspicuous potential for gas separation technologies especially for CO2 storage and separation. Thus, the present review paper is aimed to discuss the adsorption properties of CO2 on the MOFs based on the adsorption mechanisms and the design of the MOF structures. In addition, the main challenge associated with using this prominent porous material has been mentioned.
In recent years, the increasing level of CO₂ in the atmosphere has not only contributed to global warming but has also triggered considerable interest in photocatalytic reduction of CO₂. The reduction of CO₂ with H₂O using sunlight is an innovative way to solve the current growing environmental challenges. This paper reviews the basic principles of photocatalysis and photocatalytic CO₂ reduction, discusses the measures of the photocatalytic efficiency and summarizes current advances in the exploration of this technology using different types of semiconductor photocatalysts, such as TiO₂ and modified TiO₂, layered-perovskite Ag/ALa₄Ti₄O15 (A = Ca, Ba, Sr), ferroelectric LiNbO₃, and plasmonic photocatalysts. Visible light harvesting, novel plasmonic photocatalysts offer potential solutions for some of the main drawbacks in this reduction process. Effective plasmonic photocatalysts that have shown reduction activities towards CO₂ with H₂O are highlighted here. Although this technology is still at an embryonic stage, further studies with standard theoretical and comprehensive format are suggested to develop photocatalysts with high production rates and selectivity. Based on the collected results, the immense prospects and opportunities that exist in this technique are also reviewed here.
Nanocellulose, a structural polysaccharide that has caught tremendous interests nowadays due to its renewability, inherent biocompatibility and biodegradability, abundance in resource, and environmental friendly nature. They are promising green nanomaterials derived from cellulosic biomass that can be disintegrated into cellulose nanofibrils (CNF) or cellulose nanocrystals (CNC), relying on their sensitivity to hydrolysis at the axial spacing of disordered domains. Owing to their unique mesoscopic characteristics at nanoscale, nanocellulose has been widely researched and incorporated as a reinforcement material in composite materials. The world has been consuming the natural resources at a much higher speed than the environment could regenerate. Today, as an uprising candidate in soft condensed matter physics, a growing interest was received owing to its unique self-assembly behaviour and quantum size effect in the formation of three-dimensional nanostructured material, could be utilised to address an increasing concern over global warming and environmental conservation. In spite of an emerging pool of knowledge on the nanocellulose downstream application, that was lacking of cross-disciplinary study of its role as a soft condensed matter for food, water and energy applications toward environmental sustainability. Here we aim to provide an insight for the latest development of cellulose nanotechnology arises from its fascinating physical and chemical characteristic for the interest of different technology holders.
This research aims to assess the sustainability of the most common earth-retaining walls (Gravity Walls and Cantilever Walls) in terms of environmental impacts, economic issues, and their combination. Gravity walls observed in this study consist of Gabion Wall, Crib Wall, and Rubble Masonry Wall, while Cantilever Walls include Reinforced Concrete Wall. Six different criteria were taken into account, including global warming potential, fossil depletion potential, eutrophication potential, acidification potential, human toxicity potential, and cost. To achieve the aim of this study, life cycle assessments, life cycle costs, and multi-criteria decision-making methods were implemented. The results showed that the most environmental-friendly option among all alternatives was the Gabion Wall, followed by the Rubble Masonry Wall. However, in terms of economic aspects, the Cantilever Concrete Wall was the best option, costing about 17% less than the Gabion Wall. On the other hand, the results of multi-criteria decision-making showed that the Gabion Wall was the most sustainable choice. This study addressed the research gap by carrying out a sustainability assessment of different retaining walls while considering cost and environmental impacts at the same time.
Greenhouse gas emissions and global warming are recent issues of upward trend. This study sought to underline the causal relationships between engagement modes with green technology, environmental, social, and governance (ESG) ratio, and circular economy. Our investigation also captured benchmarking of energy companies' circular economy behaviors. A hybrid-stage partial least squares structural equation modeling (PLS-SEM) and multi-criteria decision-making (MCDM) analysis have been adopted. This study collected 713 questionnaires from heads of departments and managers of energy companies. The findings of this study claimed that engagement modes with green technology affect the circular economy and sustainability. The findings revealed that ESG ratings have a mediating role in the nexus among engagement modes with green technology and circular economy. The results of the MCDM application revealed the identification of the best and worst energy companies of circular economy behaviours. This study is exceptional because it is among the first to address the issues of greenhouse gas emissions by providing decisive evidence about the level of circular economy behaviors in energy companies.
The rapid development of the construction sector has led to massive use of raw construction materials, which are at risk of exhaustion. The problem is aggravated by the high demand for cement as binding powder and the mass production of clay bricks for construction purposes. This scenario has led to high energy consumption and carbon emissions in their production. In this regard, bio-cementation is considered a green solution to building construction, because this technology is environmentally friendly and capable of reducing carbon emissions, thus slowing the global warming rate. Most of the previously published articles have focused on microbiologically induced calcium carbonate precipitation (MICP), with the mechanism of bio-cementation related to the occurrence of urea hydrolysis as a result of the urease enzymatic activity by the microbes that yielded ammonium and carbonate ions. These ions would then react with calcium ions under favorable conditions to precipitate calcium carbonate. MICP was investigated for crack repair and the surface treatment of various types of construction materials. Research on MICP for the production of binders in construction materials has become a recent trend in construction engineering. With the development of cutting edge MICP research, it is beneficial for this article to review the recent trend of MICP in construction engineering, so that a comprehensive understanding on microbial utilization for bio-cementation can be achieved.
The biggest agricultural sector that contributes to the Malaysian economy is the oil palm industry. The effluent generated during the production of crude palm oil known as palm oil mill effluent (POME). POME undergoes anaerobic treatment that requires long retention time and produces large amount of methane that consequently contributes to global warming. In this study, an isolated bacteria was selected based on its ability to degrade kraft lignin (KL) and identified as Ochrobactrum sp. The bacteria were able to treat POME (from anaerobic pond) under the aerobic condition without addition of nutrient, resulting in a significant chemical oxygen demand (COD) removal of 71 %, removal rate of 1385 mg/l/day, and 12.3 times higher than that of the ponding system. It has also resulted in 60 % removal of ammoniacal nitrogen and 55 % of total polyphenolic after 6-day treatment period with the detection of lignocellulolytic enzymes.
This study critically reviews the recent developments and future opportunities pertinent to the conversion of CO2 as a potent greenhouse gas (GHG) to fuels and valuable products. CO2 emissions have reached an alarming level of around 410 ppm and have become the primary driver of global warming and climate change leading to devastating events such as droughts, hurricanes, torrential rains, floods, tornados and wildfires across the world. These events are responsible for thousands of deaths and have adversely affected the economic development of many countries, loss of billions of dollars, across the globe. One of the promising choices to tackle this issue is carbon sequestration by pre- and post-combustion processes and oxyfuel combustion. The captured CO2 can be converted into fuels and valuable products, including methanol, dimethyl ether (DME), and methane (CH4). The efficient use of the sequestered CO2 for the desalinization might be critical in overcoming water scarcity and energy issues in developing countries. Using the sequestered CO2 to produce algae in combination with wastewater, and producing biofuels is among the promising strategies. Many methods, like direct combustion, fermentation, transesterification, pyrolysis, anaerobic digestion (AD), and gasification, can be used for the conversion of algae into biofuel. Direct air capturing (DAC) is another productive technique for absorbing CO2 from the atmosphere and converting it into various useful energy resources like CH4. These methods can effectively tackle the issues of climate change, water security, and energy crises. However, future research is required to make these conversion methods cost-effective and commercially applicable.
Some call it climate change and some global warming, regardless of the term used, it has been deemed the biggest global health threat of the 21st century. It is the 13th goal of United Nations Sustainable Developmental Goals (SDG). Multiple factors contribute to this global phenomenon including the anthropogenic causes which are man-made. The repercussions of this crisis are vast and bring effect environmentally and socioeconomically. These then ultimately lead towards an effect on individual as well as population health.
Energy has a significant influence on Malaysia's industry. It is used in electricity generation, refineries, gas processing plants and end-user applications such as transportation, residential, agriculture and fishing. These burning fossil fuel activities produce greenhouse gases (GHG) emissions. This article presents the emissions data of fuel used in power plants in Malaysia during the year of 1990 until 2017. The fuel used in power plants is coal and coke, natural gas, diesel oil and residual fuel oil. The energy data used in power plants were gathered from the Malaysia Energy Information Hub, published by the Malaysian Energy Commission. The GHG emissions data were calculated using the emission factors method. The climate impact of different GHGs in terms of CO2-equivalent (CO2-e) was also calculated using global warming potentials. The article also presents population data in Malaysia during the year. A correlation between the fuels, GHG emission and the population is also investigated using statistical analysis. The data presented here may facilitate the Malaysian government to identify the source of the pollutants and undertake a climate change mitigation plan.
Reducing emissions from deforestation and forest degradation-plus (REDD+) is considered as an important mitigation strategy against global warming. However, the implementation of REDD+ can adversely affect local people who have been practicing shifting cultivation for generations. We analyzed Landsat-5 Thematic Mapper images of 1990 and 2009 to quantifying deforestation and forest degradation at Lubuk Antu District, a typical rural area of Sarawak, Malaysia. The results showed significant loss of intact forest at 0.9% per year, which was substantially higher than the rate of Sarawak. There were increases of oil palm and rubber areas but degraded forest, the second largest land cover type, had increased considerably. The local people were mostly shifting cultivators, who indicated readiness of accepting the REDD+ mechanism if they were given compensation. We estimated the monthly willingness to accept (WTA) at RM462, which can be considered as the opportunity cost of foregoing their existing shifting cultivation. The monthly WTA was well correlated with their monthly household expenses. Instead of cash payment, rubber cultivation scheme was the most preferred form of compensation.
Corporate real estate management holds the tent that risk which is not understood cannot be measured or managed. The effect of global warming on real estate investment and need for climate change mitigation through disclosures by companies of carbon emission information has becomes a sine-qua-non for the management of companies' carbon footprint and reducing its overall effect on global warming. This study applied the structural equation modeling technique to determine the determinants influencing Carbon Disclosure in Real Estate Companies in a developing economy. The analysis was based on 2013 annual reports of 126 property sector companies listed in Malaysia stock exchange market. The model was validated through convergent validity, discriminant validity, composite reliability and goodness of fit. The result reveals that social and financial market were critical determinant factors for carbon disclosure while the economic and institutional factors did not achieve significant effect on voluntary carbon disclosure. The result is consistent with legitimacy theory and agency theories. The implication of this finding is that increase in public education and awareness will enhance community demand for disclosure from companies and they will increase level of disclosure; also as financial institutions consider sustainability practice as a viable investment and term for credit financing, companies will be motivated to increase disclosure.
As the negative repercussions of environmental devastation, such as global warming and climate change, become more apparent, environmental consciousness is growing across the world, forcing nations to take steps to mitigate the damage. Thus, the current study assesses the effect of green investments, institutional quality, and political stability on air quality in the G-20 countries for the period 2004-2020. The stationarity of the variables was examined with the Pesaran (J Appl Econ 22:265-312, 2007) CADF, the long-term relationship between the variables by Westerlund (Oxf Bull Econ Stat 69(6):709-748, 2007), the long-run relationship coefficients with the MMQR method proposed by Machado and Silva (Econ 213(1):145-173, 2019), and the causality relationship between the variables by Dumitrescu and Hurlin (Econ Model 29(4):1450-1460, 2012) panel causality. The study findings revealed that green finance investments, institutional quality and political stability increased the air quality, while total output and energy consumption decreased air quality. The panel causality reveals a unidirectional causality from green finance investments, total output, energy consumption and political stability to air quality, and a bidirectional causality between institutional quality and air quality. According to these findings, it has been found that in the long term, green finance investments, total output, energy consumption, political stability, and institutional quality affect air quality. Based on these results, policies implications were proposed.
The embodied carbon of building materials and the energy consumed during construction have a significant impact on the environmental credentials of buildings. The structural systems of a building present opportunities to reduce environmental emissions and energy. In this regard, mass timber materials have considerable potential as sustainable materials over other alternatives such as steel and concrete. The aim of this investigation was to compare the environment impact, energy consumption, and life cycle cost (LCC) of different wood-based materials in identical single-story residential buildings. The materials compared are laminated veneer lumber (LVL) and glued laminated timber (GLT). GLT has less global warming potential (GWP), ozone layer depletion (OLD), and land use (LU), respectively, by 29%, 37%, and 35% than LVL. Conversely, LVL generally has lower terrestrial acidification potential (TAP), human toxicity potential (HTP), and fossil depletion potential (FDP), respectively, by 30%, 17%, and 27%. The comparative outcomes revealed that using LVL reduces embodied energy by 41%. To identify which of these materials is the best alternative, various environmental categories, embodied energy, and cost criteria require further analysis. Therefore, the multi-criteria decision-making (MCDM) method has been applied to enable robust decision-making. The outcome showed that LVL manufacturing using softwood presents the most sustainable choice. These research findings contribute to the body of knowledge about the use of mass timber in construction.
Global warming is the main concern in today’s century as it comes with numerous side effects to the natural environment. Open Top Chambers (OTC) consist of metal constructions with transparent vertical side-walls and a frustum on top. An opening in the middle of the frustum allows an air exchange to reduce temperature and humidity effects in the chamber. The size of the open top chamber which is located in Universiti Putra Malaysia is slanted 60o, 50cm tall, 2.08m basal diameter hexagon chamber. The Open Top Chamber experiments were carried out to determine how much global warming has affected and is still affecting the temperature, pH, the moisture and the growth of the microbes in the tropical soil. The aim of this study is to elucidate the effects of temperature increase on the soil microbes’ population and on the pH of the soil. The study was conducted to observe the effect of heat on the population of soil microbes and the pH of the soil which was collected on the same day for 6 consecutive months. The microbes from the samples were grown on agar plates. The population of microbes on the plates were used as values were for Colony Forming Unit (CFU) value calculations. The effects of OTCs on mean temperature showed a large range of CFU values throughout the 6 months but did not differ significantly between studies. Increases in mean monthly and diurnal temperature were strongly related, indicating that the presence of warming effect by the OTCs. Such predictive power allows a better mechanistic understanding of observed biotic response to experimental warming. This study will be useful for the understanding of the global warming effect on microbes. The Open Top Chamber experiment has proven to be one of the effective model for global warming research and data collected especially on the growth of soil microbial obtained would be of great use for further experiments.
The effects of global warming are increasingly evident, where global surface temperatures and atmospheric concentration of carbon dioxide have increased in past decades. Given the role of terrestrial bacteria in various ecological functions, it is important to understand how terrestrial bacteria would respond towards higher environmental temperatures. This study aims to determine soil bacterial diversity in the tropics and their response towards in situ warming using an open-top chamber (OTC). OTCs were set up in areas exposed to sunlight throughout the year in the tropical region in Malaysia. Soil samples were collected every 3 months to monitor changes in bacterial diversity using V3-V4 16S rDNA amplicon sequencing inside the OTCs (treatment plots) and outside the OTCs (control plots). After 12 months of simulated warming, an average increase of 0.81 to 1.15 °C was recorded in treatment plots. Significant changes in the relative abundance of bacterial phyla such as Bacteroidetes and Chloroflexi were reported. Increases in the relative abundance of Actinobacteria were also observed in treatment plots after 12 months. Substantial changes were observed at the genus level, where most bacterial genera decreased in relative abundance after 12 months. This study demonstrated that warming can alter soil bacteria in tropical soils from Kota Kinabalu.
The world faces immense pressure regarding the negative impacts of increased greenhouse gas emissions, climate change, global warming, droughts, and many other environmental problems. Australia is also facing the same issues and requires urgent attention. In this research, we have examined the effect of hydrogen firms on Australia's greenhouse gas emissions. We employed the monthly data from January 2002 to December 2021 for econometric estimations. Through quantile regression, it is noted that the expansion of hydrogen firms contributes to environmental pollution instead of controlling the emissions. Most hydrogen energy still emits carbon dioxide, which contributes to climate change. Around the world, carbon-containing fossil fuels produce more than 95% of hydrogen energy. However, as a policy suggestion, it is recommended that green hydrogen produced by electrolysis of water using renewable energy sources will succeed in achieving the Sustainable Development Goals (SDGs).
HCFCs, in addition to destroying the ozone layer, have been recognized as a contributing factor that increases global warming. It is widely used as working fluid in window air-conditioning system, where capillary tube serves as an expansion device. Literature reports have shown that no single refrigerant can solve the problem of ozone layer depletion and global warming. Refrigerant HC290/HC600a/HFC407C mixture, an eco-friendly refrigerant, has been recognized as an alternative to HCFC22. The objective of this study is to, for cost effectiveness, develop an empirical correlation to predict the refrigerant HC290/ HC600a/HFC407C mixture mass flow rate using statistical experimental design approach. A review of relevant literature shows that refrigerant’s mass flow rate depends on condensing temperature, degree of subcooling, inner diameter and length of capillary tube. The relationship between the mass flow rate and the four independent variables was established as an empirical mathematical correlation using central composite design (CCD), a response surface methodology (RSM). This empirical correlation was examined using analysis of variance (ANOVA) of 5% level of significance. The results of these analysis showed that the correlation fitted well with the experimental data yielding an average and standard deviation of 1.05% and 2.62%, respectively. The validity of the present correlation was further assessed by comparing it with published empirical correlation in literature and the result showed that the present correlation is consistent.