MyMedR

Displaying publications 1 - 20 of 75 in total

Abstract:

Sort:

Fulltext Deep-Freezing Temperatures During Irradiation Preserves the Compressive Strength of Human Cortical Bone Allografts: A Cadaver Study

Yang Harmony TC, Yusof N, Ramalingam S, Baharin R, Syahrom A, Mansor A

Clin Orthop Relat Res, 2022 Feb 01;480(2):407-418.
PMID: 34491235 DOI: 10.1097/CORR.0000000000001968

BACKGROUND: Gamma irradiation, which minimizes the risk of infectious disease transmission when human bone allograft is used, has been found to negatively affect its biomechanical properties. However, in those studies, the deep-freezing temperature during irradiation was not necessarily maintained during transportation and sterilization, which may have affected the findings. Prior reports have also suggested that controlled deep freezing may mitigate the detrimental effects of irradiation on the mechanical properties of bone allograft.
QUESTION/PURPOSE: Does a controlled deep-freezing temperature during irradiation help preserve the compressive mechanical properties of human femoral cortical bone allografts?
METHODS: Cortical bone cube samples, each measuring 64 mm3, were cut from the mid-diaphyseal midshaft of five fresh-frozen cadaver femurs (four male donors, mean [range] age at procurement 42 years [42 to 43]) and were allocated via block randomization into one of three experimental groups (with equal numbers of samples from each donor allocated into each group). Each experimental group consisted of 20 bone cube samples. Samples irradiated in dry ice were subjected to irradiation doses ranging from 26.7 kGy to 27.1 kGy (mean 26.9 kGy) at a deep-freezing temperature below -40°C (the recommended long-term storage temperature for allografts). Samples irradiated in gel ice underwent irradiation doses ranging from 26.2 kGy and 26.4 kGy (mean 26.3 kGy) in a freezing temperature range between -40°C and 0°C. Acting as controls, samples in a third group were not subjected to gamma irradiation. The mechanical properties (0.2% offset yield stress, ultimate compression stress, toughness, and the Young modulus) of samples from each group were subsequently evaluated via axial compression loading to failure along the long axis of the bone. The investigators were blinded to sample group during compression testing.
RESULTS: The mean ultimate compression stress (84 ± 27 MPa versus 119 ± 31 MPa, mean difference 35 [95% CI 9 to 60]; p = 0.005) and toughness (3622 ± 1720 kJ/m3 versus 5854 ± 2900 kJ/m3, mean difference 2232 [95% CI 70 to 4394]; p = 0.009) of samples irradiated at a higher temperature range (-40°C to 0°C) were lower than in those irradiated at deep-freezing temperatures (below -40°C). The mean 0.2% offset yield stress (73 ± 28 MPa versus 109 ± 38 MPa, mean difference 36 [95% CI 11 to 60]; p = 0.002) and ultimate compression stress (84 ± 27 MPa versus 128 ± 40 MPa, mean difference 44 [95% CI 17 to 69]; p < 0.001) of samples irradiated at a higher temperature range (-40°C to 0°C) were lower than the nonirradiated control group samples. The mean 0.2% offset yield stress (73 ± 28 MPa versus 101 ± 28 MPa, mean difference 28 [95% CI 3 to 52]; p = 0.02; effect size = 1.0 [95% CI 0.8 to 1.2]) of samples irradiated at higher temperature range (-40°C to 0°C) were no different with the numbers available to those irradiated at deep-freezing temperature. The mean toughness (3622 ± 1720 kJ/m3 versus 6231 ± 3410 kJ/m3, mean difference 2609 [95% CI 447 to 4771]; p = 0.02; effect size = 1.0 [95% CI 0.8 to 1.2]) of samples irradiated at higher temperature range (-40°C to 0°C) were no different with the numbers available to the non-irradiated control group samples. The mean 0.2% offset yield stress, ultimate compression stress, and toughness of samples irradiated in deep-freezing temperatures (below -40°C) were not different with the numbers available to the non-irradiated control group samples. The Young modulus was not different with the numbers available among the three groups.
CONCLUSION: In this study, maintenance of a deep-freezing temperature below -40°C, using dry ice as a cooling agent, consistently mitigated the adverse effects of irradiation on the monotonic-compression mechanical properties of human cortical bone tissue. Preserving the mechanical properties of a cortical allograft, when irradiated in a deep-freezing temperature, may have resulted from attenuation of the deleterious, indirect effects of gamma radiation on its collagen architecture in a frozen state. Immobilization of water molecules in this state prevents radiolysis and the subsequent generation of free radicals. This hypothesis was supported by an apparent loss of the protective effect when a range of higher freezing temperatures was used during irradiation.
CLINICAL RELEVANCE: Deep-freezing temperatures below -40°C during gamma irradiation may be a promising approach to better retain the native mechanical properties of cortical bone allografts. A further study of the effect of deep-freezing during gamma radiation sterilization on sterility and other important biomechanical properties of cortical bone (such as, tensile strength, fracture toughness, and fatigue) is needed to confirm these findings.

Matched MeSH terms: Sterilization/methods*
Fulltext Saponin Stabilization via Progressive Freeze Concentration and Sterilization Treatment

Osman WNAW, Selvarajah D, Samsuri S

Molecules, 2021 Aug 11;26(16).
PMID: 34443445 DOI: 10.3390/molecules26164856

Saponin is a biopesticide used to suppress the growth of the golden apple snail population. This study aims to determine the stabilized conditions for saponin storage. The maceration process was used for saponin extraction, and for saponin concentration, progressive freeze concentration (PFC) was used. Afterwards, stability analysis was performed by storing the sample for 21 days in two conditions: Room temperature (26 °C) and cold room (10 °C). The samples kept in a cold room were sterilized samples that undergo thermal treatment by placing the sample in the water bath. The non-sterilized samples were kept in room temperature condition for 21 days. The results showed that saponin stored in the cold room (sterilized sample) has low degradation with higher concentration than those stored at room temperature in stability analysis with the highest saponin concentration (0.730 mg/mL) at a concentration temperature of -6 °C and concentration time of 15 min. The lowest saponin concentration obtained by saponin stored at room temperature (non-sterilized sample) is 0.025 mg/mL at a concentration temperature of -6 °C and concentration time of 10 min. Thus, the finding concluded that saponin is sensitive to temperature. Hence, the best storage condition to store saponin after thermal treatment is to keep it in a cold room at 10 °C.

Matched MeSH terms: Sterilization*
Fulltext Micropropagation of Ginger (Zingiber officinale Roscoe) 'Bentong' and Evaluation of Its Secondary Metabolites and Antioxidant Activities Compared with the Conventionally Propagated Plant

Zahid NA, Jaafar HZE, Hakiman M

Plants (Basel), 2021 Mar 26;10(4).
PMID: 33810290 DOI: 10.3390/plants10040630

'Bentong' ginger is the most popular variety of Zingiber officinale in Malaysia. It is vegetatively propagated and requires a high proportion of rhizomes as starting planting materials. Besides, ginger vegetative propagation using its rhizomes is accompanied by several types of soil-borne diseases. Plant tissue culture techniques have been applied in many plant species to produce their disease-free planting materials. As 'Bentong' ginger is less known for its micropropagation, this study was conducted to investigate the effects of Clorox (5.25% sodium hypochlorite (NaOCl)) on explant surface sterilization, effects of plant growth regulators, and basal media on shoots' multiplication and rooting. The secondary metabolites and antioxidant activities of the micropropagated plants were evaluated in comparison with conventionally propagated plants. Rhizome sprouted buds were effectively sterilized in 70% Clorox for 30 min by obtaining 75% contamination-free explants. Murashige and Skoog (MS) supplemented with 10 µM of zeatin was the suitable medium for shoot multiplication, which resulted in the highest number of shoots per explant (4.28). MS medium supplemented with 7.5 µM 1-naphthaleneacetic acid (NAA) resulted in the highest number of roots per plantlet. The in vitro-rooted plantlets were successfully acclimatized with a 95% survival rate in the ex vitro conditions. The phytochemical analysis showed that total phenolic acid and total flavonoid content and antioxidant activities of the micropropagated plants were not significantly different from the conventionally propagated plants of 'Bentong' ginger. In conclusion, the present study's outcome can be adopted for large-scale propagation of disease-free planting materials of 'Bentong' ginger.

Matched MeSH terms: Sterilization
Effect of steam sterilisation on lipophilic nutrient stability in a chloroplast-rich fraction (CRF) recovered from postharvest, pea vine field residue (haulm)

Wattanakul J, Syamila M, Briars R, Ayed C, Price R, Darwish R, et al.

Food Chem, 2021 Jan 01;334:127589.
PMID: 32707366 DOI: 10.1016/j.foodchem.2020.127589

Postharvest, pea vine field residue (haulm) was steam-sterilised and then juiced; a chloroplast-rich fraction (CRF) was recovered from the juice by centrifugation. The stability of selected nutrients (β-carotene, lutein, and α-tocopherol) in the freeze-dried CRF material was measured over 84 days; the impact of temperature (-20 °C, 4 °C, 25 °C and 40 °C), light and air on nutrient stability was established. All three nutrients were stable at -20 °C and 4 °C in the presence or absence of air; this stability was lost at higher temperatures in the presence of air. The extent and rate of nutrient breakdown significantly increased when the CRF samples were exposed to light. β-Carotene appeared to be more susceptible to degradation than lutein and α-tocopherol at 40 °C in the presence of air, but when CRF was exposed to light all three nutrients measured were significantly broken down during storage at 25 °C or 40 °C, whether exposed to air or not.

Matched MeSH terms: Sterilization/methods*
Fulltext The Ethics of the Reuse of Disposable Medical Supplies

Das AK, Okita T, Enzo A, Asai A

Asian Bioeth Rev, 2020 Jun;12(2):103-116.
PMID: 33717332 DOI: 10.1007/s41649-020-00114-6

The use of single-use items (SUDs) is now ubiquitous in medical practice. Because of the high costs of these items, the practice of reusing them after sterilisation is also widespread especially in resource-poor economies. However, the ethics of reusing disposable items remain unclear. There are several analogous conditions, which could shed light on the ethics of reuse of disposables. These include the use of restored kidney transplantation and the use of generic drugs etc. The ethical issues include the question of patient safety and the possibility of infection. It is also important to understand the role (or otherwise) of informed consent before reuse of disposables. The widespread practice of reuse may bring down high healthcare costs and also reduce the huge amount of hospital waste that is generated. The reuse of disposables can be justified on various grounds including the safety and the cost effectiveness of this practice.

Matched MeSH terms: Sterilization
Selective extraction and recovery of polyphenols from palm oil mill sterilization condensate using emulsion liquid membrane process

Jusoh N, Rosly MB, Othman N, Rahman HA, Noah NFM, Sulaiman RNR

Environ Sci Pollut Res Int, 2020 Jun;27(18):23246-23257.
PMID: 32335833 DOI: 10.1007/s11356-020-07972-5

Polluted sterilization condensate discharged from palm oil mill may contain polyphenols that are rich in the antioxidant property. Emulsion liquid membrane (ELM) process is a promising method for polyphenol recovery due to its several attractive features such as high selectivity, simple operation, and low energy consumption. In this study, the condensate was characterized to determine its total phenolic content (TPC), ionic elements, and pH. ELM formulation containing tributylphosphate (TBP) as a carrier, kerosene as a diluent, sorbitan monooleate (Span 80) as a surfactant, and sodium hydroxide (NaOH) as a stripping agent was developed. The results show that sterilization condensate contains 700-1500 mg GAE/L of TPC. During the ELM process, more than 91% of extraction with 83% recovery and 8.3 enrichment were achieved at the favorable condition of 0.1 M TBP, external phase pH 5, 1 M NaOH, 1:5 treat ratio, 5% v/v of octanol as a modifier, and 100 mg GAE/L external phase concentrations. Thus, ELM offers a potential alternative technology to extract and recover polyphenols from palm oil mill sterilization condensate while contributing to sustainable production. Graphical abstract Extraction of polyphenols from palm oil mill sterilization condensate using ELM process.

Matched MeSH terms: Sterilization
Does bone marrow aspirate help enhance the integration of gamma irradiated allograft bone?

Thong FY, Mansor A, Ramalingam S, Yusof N

Cell Tissue Bank, 2020 Mar;21(1):107-117.
PMID: 31894432 DOI: 10.1007/s10561-019-09804-4

Bone allografts donated by other individuals offer a viable alternative to autograft. Risks of disease transmission are overcome by sterilizing the bone; unfortunately sterilization methods generally affect bone functional properties including osteogenic potential and biomechanical integrity. This study aimed to determine any enhancement effect when gamma sterilised allografts was impregnated with autologous bone marrow in improving the rate and quality of integration in metaphyseal-tibial defects of rabbits. Almost all subjects showed 50% of the defect being covered by new bones by the third week and smaller residual defect size in the treated group at the fifth week. Hounsfield units at the defect site showed increasing healing in all samples, with the treated group having an apparent advantage although insignificant (p > 0.05). In the histopathological score evaluating healing over cortical and cancellous bone at the fracture site showed only slight variations between the groups (p > 0.05). Therefore no enhanced healing by the autologous bone marrow was observed when added to the bone allografts in treating the unicortical defects.

Matched MeSH terms: Sterilization/methods
A study on the effects of increment and decrement repeated fed-batch feeding of glucose on the production of poly(3-hydroxybutyrate) [P(3HB)] by a newly engineered Cupriavidus necator NSDG-GG mutant in batch fill-and-draw fermentation

Biglari N, Orita I, Fukui T, Sudesh K

J Biotechnol, 2020 Jan 10;307:77-86.
PMID: 31669355 DOI: 10.1016/j.jbiotec.2019.10.013

This study investigates the effect of strategies on poly(3-hydroxybutyrate) [P(3HB)] production in bioreactor. In the production of P(3HB), urea and glucose feeding streams were developed to characterize the fed-batch culture conditions for new Cupriavidus necator NSDG-GG mutant. Feeding urea in repeated fed-batch stage (RFB-I) at 6, and 12 h in cultivation led to insignificant kinetic effect on the cell dry mass (CDM) and P(3HB) accumulation. Feeding glucose in repeated fed-batch stage (RFB-II) demonstrated that the incremental feeding approach of glucose after urea in fill-and-draw (F/D) mode at 24, 30, 36, 42, and 48 h in fermentation increased CDM and P(3HB) concentration. In the 1st cycle in RFB-II, the cumulative CDM reached the value of 26.22 g/L and then it increased with the successive repeated fed-batches to attain biomass of 145 g/L at the end of 5th cycle of RFB-II. The final cumulative P(3HB) concentration at the end of 5th cycle of RFB-II reached 111 g/L with the overall yield of 0.50 g P(3HB) g gluc- 1; the CDM productivity from the RFB-II cycles was in the range of 0.84-1.3 g/(L·h). The RFB-II of glucose in an increment mode produced nearly 2.2 times more increase in CDM and P(3HB) productivities compared to the decrement RFB-II mode. Repeated cultivation had also the advantage of avoiding extra time required for innoculum preparation, and sterilization of bioreactor during batch, thereby it increased the overall industrial importance of the process.

Matched MeSH terms: Sterilization; Sterilization, Reproductive
Fulltext Application of supercritical carbon dioxide (SC-CO2 ) on the microbial and physicochemical quality of fresh chicken meat stored at chilling temperature

Ismail Fitry Mohammad Rashedi, Safiullah Jauhar, Chong, ?Gun Hean, Nor Khaizura Mahmud @ Ab Rashid, Wan Zunairah Wan Ibadullah

International Food Research Journal, 2020;27(1):103-110.
MyJurnal

Supercritical carbon dioxide (SC-CO2 ) is a non-thermal technique implemented by food, pharmaceutical, and similar industries with the aim of inhibiting the microorganisms and apply effective sterilisation. Presently, limited number of studies has reported the application of SC-CO2 on fresh chicken meat. The present work therefore aimed to reveal the microbial and physicochemical quality of the SC-CO2 -treated fresh chicken meat. The fresh chicken meat was subjected to the SC-CO2 at 14 MPa and 45°C for 40 min and was stored at 4°C for 0, 3, and 7 days. The obtained results indicated that the treatment with SC-CO2 significantly decreased the total plate count and, yeast and mould count from log10 5.90 to 2.00 CFU/g and from log10 5.02 to 2.00 CFU/g at day 7 of storage, respectively. The values of pH, cooking loss, and water holding capacity were not affected by the treatment. The results revealed that the SC-CO2 -treated samples displayed harder texture, higher lightness and yellowness, and lower redness. In addition, lipid peroxidation of SC-CO2 and control samples resulted in values of 1.9 and 0.5 MDA/mg of meat at day 7 of storage time and did not significantly change in the rest of the evaluation days. In summary, the application of SC-CO2 was capable of enhancing the microbial quality and certain physicochemical attributes. However, alteration of certain parameters of SC-CO2 might enhance the overall meat quality.

Matched MeSH terms: Sterilization
Comparative evaluation of bioburden and sterility of indigenously prepared bone allograft with and without gentamicin

Makker K, Lamba AK, Faraz F, Tandon S, Sheikh Ab Hamid S, Aggarwal K, et al.

Cell Tissue Bank, 2019 Jun;20(2):243-253.
PMID: 30903410 DOI: 10.1007/s10561-019-09763-w

During bone allograft processing, despite stringent donor screening and use of aseptic techniques, microbial invasion may occur due to the porous nature of the graft and cause potentially fatal infections. The aim of the present study was to prepare bone allograft with and without gentamicin and to compare bioburden and sterility in the obtained grafts to evaluate the role of antibiotic in enhancing graft safety. Fifty samples of demineralized freeze-dried bone allograft were prepared from suitable donors according to international standards. Randomly selected 25 samples were placed in 8 mg gentamicin/gram bone solution for 1 h. Packaging and sealing was done to ensure no microbial ingress during transportation. 40 samples were selected for bioburden testing. Remaining 10 were subjected to 25 kGy gamma radiation and tested for sterility. Microbiological evaluation revealed no evidence of colony forming units in all the samples of both the groups (Bioburden = 0). Post-radiation sterility testing also revealed no bacterial colony in the tested samples from both the groups. Favorable results validate the processing protocol while comparable results in both groups indicate no additive benefit of gentamicin addition. Nil bioburden may be used in further studies to determine a lower radiation dose to achieve adequate sterility and minimize the disadvantages of radiation like collagen cross-linking and decreased osteoinductive capacity.

Matched MeSH terms: Sterilization/methods*
E-beam sterilizable thermoplastics elastomers for healthcare devices: Mechanical, morphology, and in vivo studies

Balaji AB, Ratnam CT, Khalid M, Walvekar R

J Biomater Appl, 2018 03;32(8):1049-1062.
PMID: 29298552 DOI: 10.1177/0885328217750476

The effect of electron beam radiation on ethylene-propylene diene terpolymer/polypropylene blends is studied as an attempt to develop radiation sterilizable polypropylene/ethylene-propylene diene terpolymer blends suitable for medical devices. The polypropylene/ethylene-propylene diene terpolymer blends with mixing ratios of 80/20, 50/50, 20/80 were prepared in an internal mixer at 165°C and a rotor speed of 50 rpm/min followed by compression molding. The blends and the individual components were radiated using 3.0 MeV electron beam accelerator at doses ranging from 0 to 100 kGy in air and room temperature. All the samples were tested for tensile strength, elongation at break, hardness, impact strength, and morphological properties. After exposing to 25 and 100 kGy radiation doses, 50% PP blend was selected for in vivo studies. Results revealed that radiation-induced crosslinking is dominating in EPDM dominant blends, while radiation-induced degradation is prevailing in PP dominant blends. The 20% PP blend was found to be most compatible for 20-60 kGy radiation sterilization. The retention in impact strength with enhanced tensile strength of 20% PP blend at 20-60 kGy believed to be associated with increased compatibility between PP and EPDM along with the radiation-induced crosslinking. The scanning electron micrographs of the fracture surfaces of the PP/EPDM blends showed evidences consistent with the above contentation. The in vivo studies provide an instinct that the radiated blends are safe to be used for healthcare devices.

Matched MeSH terms: Sterilization
Fulltext Some numerical methods and comparisons for solving mathematical model of surface decontamination by disinfectant solution

Chai, Jin Sian, Hoe, Yeak Su, Ali H. M. Murid

MATEMATIKA, 2018;34(2):0-0.
MyJurnal

A mathematical model is considered to determine the effectiveness of disin-
fectant solution for surface decontamination. The decontamination process involved the
diffusion of bacteria into disinfectant solution and the reaction of the disinfectant killing
effect. The mathematical model is a reaction-diffusion type. Finite difference method and
method of lines with fourth-order Runge-Kutta method are utilized to solve the model
numerically. To obtain stable solutions, von Neumann stability analysis is employed to
evaluate the stability of finite difference method. For stiff problem, Dormand-Prince
method is applied as the estimated error of fourth-order Runge-Kutta method. MATLAB
programming is selected for the computation of numerical solutions. From the results
obtained, fourth-order Runge-Kutta method has a larger stability region and better ac-
curacy of solutions compared to finite difference method when solving the disinfectant
solution model. Moreover, a numerical simulation is carried out to investigate the effect
of different thickness of disinfectant solution on bacteria reduction. Results show that
thick disinfectant solution is able to reduce the dimensionless bacteria concentration more
effectively.

Matched MeSH terms: Sterilization
Fulltext The effect of multiple sterilisation cycles on cutting efficiency of a diamond bur

Husniyati Roslan, Fatanah M. Suhaimi, Zawiah Musa, Nizuwan Azman, Nur Jihan Mohd Zukhi

Malaysian Journal of Medicine and Health Sciences, 2018;14(102):1-7.
MyJurnal

Sterilisation is an essential step in the reprocessing of reusable dental instruments including burs that have become contaminated, or potentially contaminated. Transmission of disease or infection may happen as an effect of improper sterilisation of the reused instruments. Dental burs are one of the essential tools in any conservative dental procedures, which undergo multiple sterilisation cycles before being discarded. However, repeated sterilisation process is associated with the reduction in cutting efficiency of a bur that is potentially due to corrosion. Thus, this study aims to compare the effect of two sterilisation methods on cutting efficiency of a diamond bur that is commonly used in dental procedures. Methods: 30 fissure diamond burs were randomly divided into three sterilisation groups: Group A (dry heat), B (steam under pressure) and C (control). Each bur was used to cut teeth for 45 seconds for ten cycles. Between cuts, the burs underwent sterilisation based on their sterilisation groups. Amount of cutting weight was measured after each cut. Results: This study shows that no significant difference (p>0.05) in the cutting efficiency of the burs following sterilisation of Groups A and B. However, there is a significant mean difference (p

Matched MeSH terms: Sterilization; Sterilization, Reproductive
Fulltext Knowledge on Bone Banking among Participants in an Orthopaedic Conference: A Preliminary Survey

Mohd S, Yusof N, Ramalingam S, Ng WM, Mansor A

Malays Orthop J, 2017 Jul;11(2):1-6.
PMID: 29021871 MyJurnal DOI: 10.5704/MOJ.1707.004

Despite increasing use of bone graft in Malaysia, there was still lack of data to quantify knowledge level on bone banking among orthopaedic community who are involved in transplantation related work. Therefore, a survey on awareness in tissue banking specifically bone banking, usage and choice of bone grafts was conducted. From 80 respondents, 82.5% were aware about tissue banking however only 12.5% knew of the existence of tissue banks in Malaysia. Femoral head was the bone allograft most often used as a substitute to autograft. Only 34.8% respondents preferred irradiated bone grafts whilst 46.9% preferred nonirradiated, indicating the need to educate the importance of radiation for sterilising tissues. Exhibition was the most preferred medium for awareness programme to disseminate information about bone banking in the orthopaedic community. The professional awareness is necessary to increase the knowledge on the use of bone graft, hence to increase bone transplantation for musculoskeletal surgeries in the country.

Matched MeSH terms: Sterilization, Reproductive
Fulltext Life-threatening Chlorhexidine Anaphylaxis: A Case Report

Kow RY, Low CL, Ruben JK, Zaharul-Azri MZ, Ng MS

Malays Orthop J, 2017 Jul;11(2):72-74.
PMID: 29021884 MyJurnal DOI: 10.5704/MOJ.1707.008

Chlorhexidine is a common antiseptic and disinfectant used in the medical field. Allergy to chlorhexidine has been reported in the literature but life-threatening anaphylactic shock is rare. We present a case of severe anaphylactic shock due to chlorhexidine occurring during surgery. Literatures suggest that profound anaphylactic shock to chlorhexidine is commonly preceded by milder, non-specific reactions. These mild symptoms are often dismissed by both the patient and physicians alike. Direct questioning of these symptoms is necessary as a part of the pre-operative assessment and the patient should be referred for further immunology testing if indicated.

Matched MeSH terms: Sterilization
Fulltext Identification of pathogenic bacteria isolated from raw and after sand filtration water at Lubok Buntar Water Treatment Plant

Nur Hafizah Zakaria, Husnul Azan Tajarudin, Mohd Sharizal Mohd Sapingi, Mohamad Fared Murshed

Scientific Research Journal, 2017;14(1):42-52.
MyJurnal

This study focused on the identification of pathogenic bacteria in raw water intake and after sand filtration for drinking water treatment plant during flood event in 2014. The samples was collected from the Lubok Buntar Water Treatment Plant (WTP) and processed through bacterial isolation using chocolate agar as a media. The isolation process conducted based on serial samples dilution and streaking method prior to DNA extraction. Deoxyribonucleic acid (DNA) extraction kit was used to get selected bacteria DNA and further analysis using Polymerase Chain Reaction (PCR) test and electrophoresis to get DNA sequences. The Basic Local Alignment Search Tool (BLAST) analysis was employed to identify the species of the isolated bacteria. As a result, Pantoeaagglomerans and Enterobacter sp. were found in raw and filtered water sample and indicating the same family types. It was concluded that bacteria of the same species were found before and after sand filtration and need to be removed by disinfectant process. The findings also indicated that all the physicochemical parameters measured were within the values prescribed by the Interim National Water Quality Standard (INWQS).

Matched MeSH terms: Sterilization
Efficiency of developed solid state bioreactor 'fermsostat' on cellulolytic and xylanase enzymes production

Lee CK, Darah I, Ibrahim C

Sains Malaysiana, 2017;46:1249-1257.

FERMSOSTAT is a developed laboratory scale solid state fermenter. It is a horizontal stirrer drum bioreactor with about 70 L capacities. The fermenter is made of stainless steel which is anti-corrosive and non-toxic to the process organism. The fermenter is equipped with sets of control systems for temperature, agitation, aeration and also outlets for substrate sampling as well as inlets for inoculation and substrate additions. The uniqueness of this FERMSOSTAT system is its ability to carry out in situ substrate sterilization and extraction of enzymes at the end of SSF process. Moreover, the mixing system provided by FERMSOSTAT can be performed either full or half mixing as well as forward or reverse mixing. Furthermore, the mixing can be programmed to run at certain agitation rate and time interval during the fermentation process to prevent or reduce damage to the fungus mycelia. FERMSOSTAT is a developed SSF bioreactor and not an improvement of any existing one. The performances of FERMSOSTAT have been evaluated. Under optimum solid state fermentation conditions, about 63.4, 397 and 3.21 U/g of CMCase, xylanase and FPase activities were detected, which were higher compared to the tray system.

Matched MeSH terms: Sterilization; Sterilization, Reproductive
Fulltext A systematic review of randomized controlled trials on sterilization methods of extracted human teeth

Western JS, Dicksit DD

J Conserv Dent, 2016 Jul-Aug;19(4):343-6.
PMID: 27563183 DOI: 10.4103/0972-0707.186457

AIM OF THIS STUDY: The aim was to evaluate the efficiency of different sterilization methods on extracted human teeth (EHT) by a systematic review of in vitro randomized controlled trials.
METHODOLOGY: An extensive electronic database literature search concerning the sterilization of EHT was conducted. The search terms used were "human teeth, sterilization, disinfection, randomized controlled trials, and infection control." Randomized controlled trials which aim at comparing the efficiency of different methods of sterilization of EHT were all included in this systematic review.
RESULTS: Out of 1618 articles obtained, eight articles were selected for this systematic review. The sterilization methods reviewed were autoclaving, 10% formalin, 5.25% sodium hypochlorite, 3% hydrogen peroxide, 2% glutaraldehyde, 0.1% thymol, and boiling to 100°C. Data were extracted from the selected individual studies and their findings were summarized.
CONCLUSION: Autoclaving and 10% formalin can be considered as 100% efficient and reliable methods. While the use of 5.25% sodium hypochlorite, 3% hydrogen peroxide, 2% glutaraldehyde, 0.1% thymol, and boiling to 100°C was inefficient and unreliable methods of sterilization of EHT.
KEYWORDS: Autoclaving; extracted human teeth; formalin; sterilization methods; systematic review

Matched MeSH terms: Sterilization
Optimizing supercritical carbon dioxide in the inactivation of bacteria in clinical solid waste by using response surface methodology

Hossain MS, Nik Ab Rahman NN, Balakrishnan V, Alkarkhi AF, Ahmad Rajion Z, Ab Kadir MO

Waste Manag, 2015 Apr;38:462-73.
PMID: 25636860 DOI: 10.1016/j.wasman.2015.01.003

Clinical solid waste (CSW) poses a challenge to health care facilities because of the presence of pathogenic microorganisms, leading to concerns in the effective sterilization of the CSW for safe handling and elimination of infectious disease transmission. In the present study, supercritical carbon dioxide (SC-CO2) was applied to inactivate gram-positive Staphylococcus aureus, Enterococcus faecalis, Bacillus subtilis, and gram-negative Escherichia coli in CSW. The effects of SC-CO2 sterilization parameters such as pressure, temperature, and time were investigated and optimized by response surface methodology (RSM). Results showed that the data were adequately fitted into the second-order polynomial model. The linear quadratic terms and interaction between pressure and temperature had significant effects on the inactivation of S. aureus, E. coli, E. faecalis, and B. subtilis in CSW. Optimum conditions for the complete inactivation of bacteria within the experimental range of the studied variables were 20 MPa, 60 °C, and 60 min. The SC-CO2-treated bacterial cells, observed under a scanning electron microscope, showed morphological changes, including cell breakage and dislodged cell walls, which could have caused the inactivation. This espouses the inference that SC-CO2 exerts strong inactivating effects on the bacteria present in CSW, and has the potential to be used in CSW management for the safe handling and recycling-reuse of CSW materials.

Matched MeSH terms: Sterilization/methods*
Fulltext Which is the best method of sterilization for recycled bone autograft in limb salvage surgery: a radiological, biomechanical and histopathological study in rabbit

Yasin NF, Ajit Singh V, Saad M, Omar E

BMC Cancer, 2015;15:289.
PMID: 25884718 DOI: 10.1186/s12885-015-1234-9

Limb salvage surgery is a treatment of choice for sarcomas of the extremities. One of the options in skeletal reconstruction after tumour resection is by using a recycled bone autograft. The present accepted methods of recycling bone autografts include autoclaving, pasteurization and irradiation. At the moment there is lack of studies that compare the effectiveness of various sterilization methods used for recycling bone autografts and their effects in terms of bone incorporation. This study was performed to determine the effects of different methods of sterilization on bone autografts in rabbit by radiological, biomechanical and histopathological evaluations.

Matched MeSH terms: Sterilization/methods*

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links