Displaying publications 1 - 20 of 50 in total

Abstract:
Sort:
  1. Masood A, Maheen S, Khan HU, Shafqat SS, Irshad M, Aslam I, et al.
    ACS Omega, 2021 Mar 30;6(12):8210-8225.
    PMID: 33817480 DOI: 10.1021/acsomega.0c06242
    The current research aimed at designing mesoporous silica nanoparticles (MSNs) for a controlled coadministration of salicylic acid (SA) and ketoconazole (KCZ) to effectively treat highly resistant fungal infections. The sol-gel method was used to formulate MSNs, which were further optimized using central composite rotatable design (CCRD) by investigating mathematical impact of independent formulation variables such as pH, stirring time, and stirring speed on dependent variables entrapment efficiency (EE) and drug release. The selected optimized MSNs and pure drugs were subjected to comparative in vitro/in vivo antifungal studies, skin irritation, cytotoxicity, and histopathological evaluations. The obtained negatively charged (-23.1), free flowing spherical, highly porous structured MSNs having a size distribution of 300-500 nm were suggestive of high storage stability and improved cell proliferation due to enhanced oxygen supply to cells. The physico-chemical evaluation of SA/KCZ-loaded MSNs performed through powder X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), and thermal gravimetric analysis (TGA) indicates absolute lack of any interaction between formulation components and successful encapsulation of both drugs in MSNs. The EESA, EEKCZ, SA release, and KCZ release varied significantly from 34 to 89%, 36 to 85%, 39 to 88%, and 43 to 90%, respectively, indicating the quadratic impact of formulation variables on obtained MSNs. For MSNs, the skin tolerability and cell viability percentage rate were also having an extraordinary advantage over suspension of pure drugs. The optimized SA/KCZ-loaded MSNs demonstrated comparatively enhanced in vitro/in vivo antifungal activities and rapid wound healing efficacy in histopathological evaluation without any skin irritation impact, suggesting the MSNs potential for the simultaneous codelivery of antifungal and keratolyic agents in sustained release fashion.
    Matched MeSH terms: Suspensions
  2. Gupta M, Hawari HF, Kumar P, Burhanudin ZA, Tansu N
    Nanomaterials (Basel), 2021 Mar 03;11(3).
    PMID: 33802318 DOI: 10.3390/nano11030623
    The demand for carbon dioxide (CO2) gas detection is increasing nowadays. However, its fast detection at room temperature (RT) is a major challenge. Graphene is found to be the most promising sensing material for RT detection, owing to its high surface area and electrical conductivity. In this work, we report a highly edge functionalized chemically synthesized reduced graphene oxide (rGO) thin films to achieve fast sensing response for CO2 gas at room temperature. The high amount of edge functional groups is prominent for the sorption of CO2 molecules. Initially, rGO is synthesized by reduction of GO using ascorbic acid (AA) as a reducing agent. Three different concentrations of rGO are prepared using three AA concentrations (25, 50, and 100 mg) to optimize the material properties such as functional groups and conductivity. Thin films of three different AA reduced rGO suspensions (AArGO25, AArGO50, AArGO100) are developed and later analyzed using standard FTIR, XRD, Raman, XPS, TEM, SEM, and four-point probe measurement techniques. We find that the highest edge functionality is achieved by the AArGO25 sample with a conductivity of ~1389 S/cm. The functionalized AArGO25 gas sensor shows recordable high sensing properties (response and recovery time) with good repeatability for CO2 at room temperature at 500 ppm and 50 ppm. Short response and recovery time of ~26 s and ~10 s, respectively, are achieved for 500 ppm CO2 gas with the sensitivity of ~50 Hz/µg. We believe that a highly functionalized AArGO CO2 gas sensor could be applicable for enhanced oil recovery, industrial and domestic safety applications.
    Matched MeSH terms: Suspensions
  3. Khanuja HK, Awasthi R, Mehta M, Satija S, Aljabali AAA, Tambuwala MM, et al.
    Recent Pat Nanotechnol, 2021;15(4):351-366.
    PMID: 33357187 DOI: 10.2174/1872210514666201224103010
    BACKGROUND: Nanosuspensions are colloidal systems consisting of pure drug and stabilizers, without matrix or lyophilized into a solid matrix. Nanosuspensions improve the solubility of the drug both in the aqueous and organic phases. Nanosuspensions are also known as brick dust molecules, as they increase the dissolution of a system and improve absorption.

    METHODS: Extensive information related to nanosuspensions and its associated patents were collected using Pub Med and Google Scholar.

    RESULTS: Over the last decade nanosuspensions have attracted tremendous interest in pharmaceutical research. It provides unique features including, improved solubility, high drug loading capacity, and passive targeting. These particles are cost-effective, simple, and have lesser side effects with minimal dose requirements. However, the stability of nanosuspensions still warrants attention.

    CONCLUSION: Nanosuspensions play a vital role in handling the numerous drug entities with difficult physico-chemical characteristics such as solubility and can further aid with a range of routes that include nasal, transdermal, ocular, parenteral, pulmonary etc. This review highlights the relevance of nanosuspensions in achieving safe, effective and targeted drug delivery.

    Matched MeSH terms: Suspensions
  4. Makama AB, Salmiaton A, Choong TSY, Hamid MRA, Abdullah N, Saion E
    Chemosphere, 2020 Aug;253:126689.
    PMID: 32304862 DOI: 10.1016/j.chemosphere.2020.126689
    Removal of ciprofloxacin (CIP) pollutant from wastewater using conventional process is particularly challenging due to poor removal efficiency. In this work, CIP was photocatalytically degraded using a porous ZnO/SnS2 photocatalyst prepared via microwaves. The influence of process parameters (e.g., pH, catalyst mass and initial CIP concentration) and radical scavengers on visible-light induced degradation of CIP on the catalyst was investigated. From the study, it was found that visible-light induced degradation of CIP on ZnO/SnS2 is a surface-mediated process and the reaction kinetics followed the Langmuir-Hinshelwood first-order kinetics. It was found that the optimum condition for CIP degradation was at pH of 6.1 and catalyst dosage of 500 mg L-1. Higher catalyst dosage however led to a decline in reaction rate due to light scattering effect and reduction in light penetration.
    Matched MeSH terms: Suspensions
  5. Sajab MS, Mohan D, Santanaraj J, Chia CH, Kaco H, Harun S, et al.
    Sci Rep, 2019 08 12;9(1):11703.
    PMID: 31406228 DOI: 10.1038/s41598-019-48274-2
    The recognition of cellulose nanofibrils (CNF) in the past years as a high prospect material has been prominent, but the impractical cellulose extraction method from biomass remained as a technological barrier for industrial practice. In this study, the telescopic approach on the fractionation of lignin and cellulose was performed by organosolv extraction and catalytic oxidation from oil palm empty fruit bunch fibers. The integration of these techniques managed to synthesize CNF in a short time. Aside from the size, the zeta potential of CNF was measured at -41.9 mV, which allow higher stability of the cellulose in water suspension. The stability of CNF facilitated a better dispersion of Fe(0) nanoparticles with the average diameter size of 52.3-73.24 nm through the formulation of CNF/Fe(0). The total uptake capacity of CNF towards 5-fluorouracil was calculated at 0.123 mg/g. While the synergistic reactions of adsorption-oxidation were significantly improved the removal efficacy three to four times greater even at a high concentration of 5-fluorouracil. Alternatively, the sludge generation after the oxidation reaction was completely managed by the encapsulation of Fe(0) nanoparticles in regenerated cellulose.
    Matched MeSH terms: Suspensions
  6. Dzinun H, Othman MHD, Ismail AF
    Chemosphere, 2019 Aug;228:241-248.
    PMID: 31035161 DOI: 10.1016/j.chemosphere.2019.04.118
    Comparison studies in suspension and hybrid photocatalytic membrane reactor (HPMR) system was investigated by using Reactive Black 5 (RB5) as target pollutant under UVA light irradiation. To achieve this aim, hybrid TiO2/clinoptilolite (TCP) photocatalyst powder was prepared by solid-state dispersion (SSD) methods and embedded at the outer layer of dual layer hollow fiber (DLHF) membranes fabricated via single step co-spinning process. TiO2 and CP photocatalyst were also used as control samples. The samples were characterized by Scanning Electron Microscopy (SEM), Energy Dispersion of X-ray (EDX), X-ray diffraction (XRD) and Brunauer-Emmett-Teller (BET) analyses. The result shows that TCP was actively functioned as photocatalyst in suspension system and 86% of RB5 photocatalytic degradation achieved within 60 min; however the additional step is required to separate the catalyst with treated water. In the HPMR system, even though the RB5 photocatalytic degradation exhibits lower efficiency however the rejection of RB5 was achieved up to 95% under UV irradiation due to the properties of photocatalytic membranes. The well dispersed of TCP at the outer layer of DLHF membrane have improved the surface affinity of DL-TCP membrane towards water, exhibit the highest pure water flux of 41.72 L/m2.h compared to DL-TiO2 membrane. In general, CP can help on improving photocatalytic activity of TiO2 in suspension, increased the RB5 removal and the permeability of DLHF membrane in HPMR system as well.
    Matched MeSH terms: Suspensions
  7. Mad' Atari MFB, Folta KM
    BMC Res Notes, 2019 Mar 15;12(1):144.
    PMID: 30876440 DOI: 10.1186/s13104-019-4117-3
    OBJECTIVE: The treatment of plant tissue with Agrobacterium tumefaciens is often a critical first step to both stable and transient plant transformation. In both applications bacterial suspensions are oftentimes physically introduced into plant tissues using hand-driven pressure from a needleless syringe. While effective, this approach has several drawbacks that limit reproducibility. Pressure must be provided with the syringe perfectly perpendicular to the tissue surface. The researcher must also attempt to provide even and consistent pressure, both within and between experimental replicates. These factors mean that the procedures do not always translate well between research groups or biological replicates.

    RESULTS: We have devised a method to introduce Agrobacterium suspensions into plant leaves with greater reproducibility. Using a decommissioned dissecting microscope as an armature, a syringe body with the bacterial suspension is mounted to the nosepiece. Gentle, even pressure is applied by rotating the focus knob. The treatment force is measured using a basic kitchen scale. The development of the Standardized Pressure Agrobacterium Infiltration Device (SPAID) provides a means to deliver consistent amounts of bacterial suspensions into plant tissues with the goal of increasing reproducibility between replicates and laboratories.

    Matched MeSH terms: Suspensions
  8. Makmud MZH, Illias HA, Chee CY, Dabbak SZA
    Materials (Basel), 2019 Mar 11;12(5).
    PMID: 30861988 DOI: 10.3390/ma12050816
    This study provides a thorough investigation of partial discharge (PD) activities in nanofluid insulation material consisting of different types of nanoparticles, which are conductive and semiconductive when subjected to high voltage stress is presented. Nanofluids have become a topic of interest because they can be an alternative to liquid insulation in electrical apparatus due to their promising dielectric strength and cooling ability. However, during in-service operation, PDs can occur between conductors in the insulation system. Therefore, this study presents the behavior of PDs within nanofluid dielectric materials consisting of conductive and semiconductive nanoparticles. The results show that there is an improvement in the PD resistance and a reduction in the tan delta of nanofluids at power frequency after the incorporation of conductive or semiconductive nanoparticles in the nanofluid oil. However, the most suitable concentration of conductive and semiconductive nanoparticles in the base fluid was found to be, respectively, 0.01 g/L and 1.0 g/L at PD inception and PD steady-state conditions. The clustering of nanoparticles in a nanofluid suspension due to PD activities is also discussed in this study.
    Matched MeSH terms: Suspensions
  9. Khan AA, Mudassir J, Akhtar S, Murugaiyah V, Darwis Y
    Pharmaceutics, 2019 Feb 25;11(2).
    PMID: 30823545 DOI: 10.3390/pharmaceutics11020097
    Nanostructured lipid carriers (NLCs) loaded with lopinavir (LPV) were prepared by the high-shear homogenization method. The LPV-NLCs formulations were freeze-dried using trehalose as a cryoprotectant. In vitro release studies in simulated gastric fluid (pH 1.2) and simulated intestinal fluid (pH 6.8) showed a burst release. The optimized freeze-dried formulation (LPV-NLC-7-Tres) had a particle size (PS), polydispersity index (PdI), zeta potential (ZP) and % entrapment efficiency (%EE) of 286.8 ± 1.3 nm, 0.413 ± 0.017, -48.6 ± 0.89 mV and 88.31 ± 2.04%, respectively. The optimized formulation observed by transmission and scanning electron microscopes showed a spherical shape. Differential scanning calorimetry study revealed the absence of chemical interaction between the drug and lipids. In vitro cellular uptake study using Caco-2 cell line showed a higher LPV uptake from LPV-NLC-7-Tres formulation compared to the free LPV-suspension. The 6-month stability study showed a minimum rise of ~40 nm in PS, while no significant changes in PdI, ZP and drug content of the LPV-NLC-7-Tres formulation stored at 5 °C ± 3 °C. The bioavailability of LPV following oral administration of LPV-NLC-7-Tres in male Wistar rats was found 6.98-fold higher than the LPV-suspension. In conclusion, the nanostructure lipid carriers are potential carriers for improving the oral bioavailability of lopinavir.
    Matched MeSH terms: Suspensions
  10. Daungfu O, Youpensuk S, Lumyong S
    Trop Life Sci Res, 2019 Jan;30(1):73-88.
    PMID: 30847034 DOI: 10.21315/tlsr2019.30.1.5
    Citrus canker caused by Xanthomonas citri subsp. citri is a disease affecting the yield and fruit quality of lime (Citrus aurantiifolia). This research investigated endophytic bacteria obtained from six healthy Citrus spp. to inhibit the pathogen and to control citrus canker on lime plants. Numbers of the endophytic bacteria isolated from C. aurantifolia, C. hystrix, C. maxima, C. nobilis, C. reticulata and C. sinensis were 28, 25, 29, 42, 12 and 34 isolates, respectively. The selected endophytic bacteria that were effective against X. citri subsp. citri were Bacillus amyloliquefaciens LE109, B. subtilis LE24 and B. tequilensis PO80. The optimum culture medium for an antagonistic effect on the pathogen in B. amyloliquefaciens LE109 and B. tequilensis PO80 was yeast extract peptone dextrose broth, and in B. subtilis LE24 was modified soluble starch broth. To control citrus canker in lime, young expanded leaves of lime plants were aseptically punctured and inoculated with 30 μl of bacterial suspension of the pathogen (108 CFU/ml in 0.85% NaCl) per punctured location. After the pathogenic inoculation for 24 h, the leaves were then inoculated with 30 μl of the selected endophytic bacteria (108 CFU/ml in 0.85% NaCl), and treated with 30 μl of the culture media containing bioactive compounds produced by the selected endophytic bacteria. The leaves inoculated with cell suspensions of B. amyloliquefaciens LE109 or B. subtilis LE24 could completely control citrus canker. However, the leaves inoculated with B. tequilensis PO80 displayed 10% disease incidence. Additionally, the leaves treated with the crude bioactive compounds of B. amyloliquefaciens LE109 or B. subtilis LE24 could completely control citrus canker. Notably, the leaves treated with the crude bioactive compounds of B. tequilensis PO80 displayed 5% disease incidence. The results of this study showed that the Bacillus strains play important roles in the biocontrol of citrus canker in lime.
    Matched MeSH terms: Suspensions
  11. Haniza Hassan, Ahmad Fuad Shamsuddin, Ekram Alias, Meor Mohd Redzuan Meor Mohd Affandi, Siti Khadijah Adam, Rusliza Basir
    MyJurnal
    Introduction:Acyclovir, a widely marketed antiviral drug is used for the treatment of Herpes Simplex infection. High doses of acyclovir are prescribed to patients to attain its maximum therapeutic effect due to its poor absorption and low oral bioavailability. The current therapeutics regiment of acyclovir are known to cause unwarranted adverse effects, thus prompted the need for a suitable drug carrier to improve the pharmacokinetic limitations. Develop-ment of solid lipid nanoparticles for oral delivery of acyclovir proposed in this study aimed to enhance acyclovir oral bioavailability. Methods: Comprehensive experiments and a series of optimization process were carried out to ensure reproducibility and assurance of product quality. The physicochemical characteristics of the solid lipid nanoparticles developed from plant-based solid lipid, Biogapress Vegetal 297 ATO with polysorbate 80 as an emul-sifying agent were also evaluated. Results: The spherical-shaped nanoparticles had an average size of 123 nm with good drug entrapment efficiency, up to 80%. The in vitro drug release study showed that solid lipid nanoparticles had prolonged acyclovir release in simulated intestinal fluid for 24 hours. The nanoparticles formulation was con-sidered stable during storage at refrigerated temperature for at least three months. In vivo oral bioavailability study showed that acyclovir-loaded solid lipid nanoparticles possessed superior oral bioavailability when compared with the commercial acyclovir suspension. Conclusion: In conclusion, this study exhibited the feasibility of solid lipid nanoparticles as an oral delivery vehicle for acyclovir and therefore represent a new promising therapeutic concept of nanoparticulate delivery system.
    Matched MeSH terms: Suspensions
  12. Sharmeen Nellisa Soffian, Nurul Alia Risma Rismayuddin, Munirah Mokhtar, Mohd Hafiz Arzmi
    MyJurnal
    Introduction:Candida spp. are most common opportunistic pathogenic yeast that inhabit human oral cavity, epider-mis, gastrointestinal tract, and vagina leading to candidiasis. The transition of this yeast from commensal to potent pathogen is facilitated by numbers of virulence factors including biofilm formation. While most reports on candidi-asis are associated with formation Candida albicans biofilms, however, non-albicans Candida species prevalence is of growing concern. Recently, the use of probiotics as antifungal and antibiofilm has gained an increasing attention. As such, we aim to evaluate the inhibitory effect of monomicrobial and polymicrobial of Streptococcus salivariuson six strains of NAC namely Candida dubliniensis, Candida glabrata, Candida krusei, Candida lusitanaei, Candida parapsilosis and Candida tropicalis. Methods: Antifungal activity of S. salivarius on NAC species was performed using well diffusion method on Mueller Hinton Agar (MHA) and the diameter of inhibition zone were assessed. For formation of monomicrobial biofilm, standardized cell suspensions of NAC species (1 x 105 cells/ml) and probiotic Streptococcus salivarius (1 x 106 cells/ml) were grown in RPMI or nutrient broth media at 37°C for 72 h. Meanwhile to study polymicrobial biofilm of both NAC and S. salivarius, similar protocol was employed by inoculating both microorganisms with a similar cell density as in monomicrobial. Finally, biofilm formation was assessed through quantification of total biomass by crystal violet (CV) assay and the absorbance of adherent biofilm was measured in triplicate at 620nm. Results: Antifungal susceptibility testing of S. salivarius on all six NAC species discerned no zone of inhibition. Furthermore, our results showed variability of monomicrobial and polymicrobial biofilm biomass between NAC species and growth medium. All six polymicrobial NB-grown and RPMI-grown exhibited decreased of the biofilm formation. C. parapsilosis co-cultured with S. salivarius in NB medium had shown lowest biofilm bio-mass by 75.51+_1.34% while in RPMI medium, C. lusitanaei demonstrated with most reduced biofilm biomass by 67.03+_5.19. Conclusion: Our study elucidated the antagonistic relationship between Streptococcus salivarius and non-albicans Candida by supressing the growth of polymicrobial biofilm and pseudohyphae/hyphae of NAC species.
    Matched MeSH terms: Suspensions
  13. Yu Z, Liu J, Tan CSY, Scherman OA, Abell C
    Angew Chem Int Ed Engl, 2018 03 12;57(12):3079-3083.
    PMID: 29377541 DOI: 10.1002/anie.201711522
    The ability to construct self-healing scaffolds that are injectable and capable of forming a designed morphology offers the possibility to engineer sustainable materials. Herein, we introduce supramolecular nested microbeads that can be used as building blocks to construct macroscopic self-healing scaffolds. The core-shell microbeads remain in an "inert" state owing to the isolation of a pair of complementary polymers in a form that can be stored as an aqueous suspension. An annealing process after injection effectively induces the re-construction of the microbead units, leading to supramolecular gelation in a preconfigured shape. The resulting macroscopic scaffold is dynamically stable, displaying self-recovery in a self-healing electronic conductor. This strategy of using the supramolecular assembled nested microbeads as building blocks represents an alternative to injectable hydrogel systems, and shows promise in the field of structural biomaterials and flexible electronics.
    Matched MeSH terms: Suspensions
  14. Jeong W, Snell GI, Levvey BJ, Westall GP, Morrissey CO, Wolfe R, et al.
    J Antimicrob Chemother, 2018 Mar 01;73(3):748-756.
    PMID: 29211913 DOI: 10.1093/jac/dkx440
    Objectives: This study describes therapeutic drug monitoring (TDM) of posaconazole suspension and modified release (MR) tablets in lung transplant (LTx) recipients and evaluates factors that may affect posaconazole trough plasma concentration (Cmin).

    Methods: A single-centre, retrospective study evaluating posaconazole Cmin in LTx recipients receiving posaconazole suspension or MR tablets between January 2014 and December 2016.

    Results: Forty-seven LTx patients received posaconazole suspension, and 78 received the MR tablet formulation; a total of 421 and 617 Cmin measurements were made, respectively. Posaconazole was concurrently administered with proton pump inhibitor in ≥ 90% of patients. The median (IQR) of initial posaconazole Cmin following 300 mg daily of posaconazole tablet was significantly higher than that of 800 mg daily of posaconazole suspension [1.65 (0.97-2.13) mg/L versus 0.81 (0.48-1.15) mg/L, P 

    Matched MeSH terms: Suspensions
  15. Sadri R, Hosseini M, Kazi SN, Bagheri S, Abdelrazek AH, Ahmadi G, et al.
    J Colloid Interface Sci, 2018 Jan 01;509:140-152.
    PMID: 28898734 DOI: 10.1016/j.jcis.2017.07.052
    In this study, we synthesized covalently functionalized graphene nanoplatelet (GNP) aqueous suspensions that are highly stable and environmentally friendly for use as coolants in heat transfer systems. We evaluated the heat transfer and hydrodynamic properties of these nano-coolants flowing through a horizontal stainless steel tube subjected to a uniform heat flux at its outer surface. The GNPs functionalized with clove buds using the one-pot technique. We characterized the clove-treated GNPs (CGNPs) using X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM). We then dispersed the CGNPs in distilled water at three particle concentrations (0.025, 0.075 and 0.1wt%) in order to prepare the CGNP-water nanofluids (nano-coolants). We used ultraviolet-visible (UV-vis) spectroscopy to examine the stability and solubility of the CGNPs in the distilled water. There is significant enhancement in thermo-physical properties of CGNPs nanofluids relative those for distilled water. We validated our experimental set-up by comparing the friction factor and Nusselt number for distilled water obtained from experiments with those determined from empirical correlations, indeed, our experimental set-up is reliable and produces results with reasonable accuracy. We conducted heat transfer experiments for the CGNP-water nano-coolants flowing through the horizontal heated tube in fully developed turbulent condition. Our results are indeed promising since there is a significant enhancement in the Nusselt number and convective heat transfer coefficient for the CGNP-water nanofluids, with only a negligible increase in the friction factor and pumping power. More importantly, we found that there is a significant increase in the performance index, which is a positive indicator that our nanofluids have potential to substitute conventional coolants in heat transfer systems because of their overall thermal performance and energy savings benefits.
    Matched MeSH terms: Suspensions
  16. Liyana Mohd Ali Napia, Faizal Mohamed, Hur Munawar Kabir Mohd, Intan Syakeela Ahmad Bastamam, Shamellia Sharin, Norsyahidah Mohd Hidzir, et al.
    Sains Malaysiana, 2018;47:1235-1240.
    Unilamellar liposomes composed of dipalmitoylphosphatidylcholine (DPPC) were prepared by the reverse-phase
    evaporation method and extrusion through a polycarbonate membrane filter. Liposomes at 0.7 mg/mL lipid concentration
    in deionized water were exposed to gamma irradiation at a dose in the range 0.5 to 25 kGy. Gamma irradiation of
    liposomes resulted in the degradation of DPPC lipids into free fatty acids, lysophosphatidylcholine and 1,2-palmitoylphosphatidic
    acid (DPPA). The effect of gamma irradiation towards the physical stability of liposomes was investigated
    by means of dynamic light scattering (DLS), transmission electron microscopy (TEM) and zeta potential analysis. From
    the DLS analysis, no significant changes were observed in the hydrodynamic size of liposomes. TEM images indicate that
    the liposomes surface became smoother and rounder as higher irradiation doses were applied. Zeta potential analysis
    showed that gamma irradiation of DPPC liposomes at radiation doses as low as 0.5 kGy resulted in a drastic rise in the
    magnitude of the zeta potential. The results also demonstrate that gamma irradiation of liposomes suspension enhanced
    the overall stability of liposomes. Hence, it can be concluded that gamma irradiation on DPPC liposomes may potentially
    produce liposomes with higher stability.
    Matched MeSH terms: Suspensions
  17. Chuin HC, Che Husna Azhari, Mohamed Aboras, Masfueh Razali, Andanastuti Muchtar
    Sains Malaysiana, 2018;47:1591-1597.
    This study aimed to improve the colloidal stability of yttria-stabilized tetragonal zirconia polycrystalline (Y-TZP)
    suspension through colloidal processing to obtain highly translucent Y-TZP. Agglomeration is often the main complication
    in the processing of nanosized Y-TZP as it deteriorates mechanical and optical properties. Thus, colloidal processing
    is necessary to mitigate the agglomeration in Y-TZP. The colloidal stability of Y-TZP suspension plays a key role for the
    success of colloidal processing. In this study, colloidal processing was conducted at several stages, namely, dispersant
    addition, pH adjustment and sedimentation. Changes in particle size and zeta potential at various stages were recorded.
    The suspensions were then slip-casted to form green bodies. Green bodies were sintered and characterized for density
    and translucency. The results showed that dispersant addition followed by pH adjustment effectively dispersed soft
    agglomerates by introducing electrosteric stabilization, whereas sedimentation successfully segregated hard agglomerates
    and contributed excellent colloidal stability. With high colloidal stability, the translucency of Y-TZP was improved by
    approximately 30%. This study demonstrated different colloidal processing stages and proved that high colloidal stability
    and fine particle size are vital to produce highly translucent Y-TZP.
    Matched MeSH terms: Suspensions
  18. Saiman MZ, Mustafa NR, Verpoorte R
    Methods Mol Biol, 2018;1815:437-455.
    PMID: 29981141 DOI: 10.1007/978-1-4939-8594-4_31
    The plant Catharanthus roseus is a rich source of terpenoid indole alkaloids (TIA). Some of the TIA are important as antihypertensive (ajmalicine) and anticancer (vinblastine and vincristine) drugs. However, production of the latter is very low in the plant. Therefore, in vitro plant cell cultures have been considered as a potential supply of these chemicals or their precursors. Some monomeric alkaloids can be produced by plant cell cultures, but not on a level feasible for commercialization, despite extensive studies on this plant that deepened the understanding of the TIA biosynthesis and its regulation. In order to analyze the metabolites in C. roseus cell cultures, this chapter presents the method of TIA, carotenoids, and phytosterols analyses. Furthermore, an NMR-based metabolomics approach to study C. roseus cell culture is described.
    Matched MeSH terms: Suspensions
  19. Mohd Shakrie Palan Abdullah, Mohamed Ibrahim Noordin, Syed Ibrahim Mohd Ismail, Nur Murnisa Mustapha, Malina Jasamai, Ahmad Fuad Shamsuddin, et al.
    Sains Malaysiana, 2018;47:323-336.
    Gelatine is used as an excipient for various pharmaceutical dosage forms, such as capsule shells (both hard and soft),
    tablets, suspensions, emulsions and injections (e.g. plasma expanders). It is also broadly used in various industries
    such as food and cosmetics. Gelatine is a biopolymer obtained from discarded or unused materials of bovine, porcine,
    ovine, poultry and marine industrial farms. The discarded materials can be the skin, tendons, cartilages, bones and
    connective tissues. Gelatine sourced from animals is relatively easy and inexpensive to produce. The potential needs of
    gelatine cannot be overemphasised. Rising demands, health concerns and religious issues have heightened the need for
    alternative sources of gelatine. This review presents the various industrial uses of gelatine and the latest developments
    in producing gelatine from various sources.
    Matched MeSH terms: Suspensions
  20. Jeong W, Snell GI, Levvey BJ, Westall GP, Morrissey CO, Ivulich S, et al.
    J Antimicrob Chemother, 2017 Jul 01;72(7):2089-2092.
    PMID: 28369489 DOI: 10.1093/jac/dkx085
    Objectives: This study describes the clinical outcomes and therapeutic drug monitoring (TDM) following posaconazole suspension pre-emptive therapy in lung transplant (LTx) recipients.

    Methods: This was a single-centre, retrospective cohort study evaluating posaconazole suspension pre-emptive therapy in LTx recipients between January 2009 and December 2015.

    Results: Forty-two LTx recipients were prescribed posaconazole suspension pre-emptively. Aspergillus fumigatus was the most commonly isolated fungal organism. Of the patients receiving posaconazole suspension as the initial antifungal post-LTx, 93% had eradication of colonization at 6 months after commencing therapy. In contrast, only 61% had eradication of fungal colonization when posaconazole suspension was administered following initial therapy with voriconazole. Posaconazole suspension appeared to be well tolerated, although one case was curtailed following concern about abnormal liver function and another due to nausea/vomiting. TDM was performed in 37 patients. The initial median (IQR) trough plasma concentration ( C min ) following 400 mg twice-daily posaconazole suspension was 0.78 (0.46-1.19) mg/L. Doses beyond 800 mg daily did not appear to result in a higher median C min.

    Conclusions: Early initiation of posaconazole suspension pre-emptive therapy in LTx recipients appears to be well tolerated and may potentially afford favourable clinical outcomes.

    Matched MeSH terms: Suspensions
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links