Displaying publications 2001 - 2020 of 2920 in total

Abstract:
Sort:
  1. Growth enhancement of effective microorganisms for bioremediation of crude oil contaminated waters
    Mukred AM, Abd-Hamid A, Hamzah A, Yusoff WM
    Pak J Biol Sci, 2008 Jul 01;11(13):1708-12.
    PMID: 18819623
    The bioremediation of polluted groundwater, wastewater aeration pond and biopond sites was investigated using bacteria isolated from these sites located at the oil refinery Terengganu Malaysia. Out of 62 isolates, only 16 isolates from groundwater (8) and wastewater aeration pond (3) and biopond (5) were chosen based on growth medium containing 1% (v/v) Tapis crude oil. Only four isolates; Acinetobacter faecalis, Staphylococcus sp., Pseudomonas putida and Neisseria elongata showed percentage biodegradation of crude oil more than 50% after 5 days using Mineral Salts Medium (MSM). The effect of physical parameters (temperature, pH and agitation) on growth by all four strains showed a maximum growth in MSM medium with 1% Tapis crude oil at 37 degrees C with pH 7 and agitation of 130 rpm.
    Matched MeSH terms: Temperature
  2. Xylanase production by Aspergillus niger FTCC 5003 using palm kernel cake in fermentative bioprocess
    Abdeshahian P, Samat N, Yusoff WM
    Pak J Biol Sci, 2009 Aug 01;12(15):1049-55.
    PMID: 19943460
    The production of xylanase from palm kernel cake as a substrate was studied in solid substrate fermentation. The simultaneous effects of three independent variables, namely incubation temperature, initial moisture content of substrate and air flow rate on xylanase production were evaluated by response surface methodology using central composite face centered design. A total of 18 experiments were carried out in which Aspergillus niger FTCC 5003 was cultivated on palm kernel cake in a column bioreactor for 7 days under incubation temperature, moisture level and aeration rate determined. Test results showed that the highest xylanase activity of 174.88 U g(-1) was produced at incubation temperature, initial moisture level and aeration rate of 25 degrees C, 60% and 1.5 L min(-1), respectively. The statistical analysis of the experimental results revealed that the linear effect of incubation temperature and quadratic term of initial moisture content had highly significant effects on xylanase production (p<0.01). Statistical results also showed that interaction effect between incubation temperature and initial moisture content as well as interaction effect between moisture level and aeration rate influenced the yield ofxylanase at probability levels of 95%. Optimum conditions determined by statistical model for attaining maximum xylanase production were incubation temperature of 25 degrees C, initial moisture level of 63% and aeration rate of 1.76 L min(-1). The xylanase activity of 192.50 U g(-1) was obtained when solid substrate fermentation was performed under the optimal circumstances.
    Matched MeSH terms: Temperature
  3. Diversity and distribution of fishes in tropical estuary Kuantan, Pahang, Malaysia
    Jalal KC, Kamaruzzaman BY, Arshad A, Ara R, Rahman MF
    Pak J Biol Sci, 2012 Jun 15;15(12):576-82.
    PMID: 24191619
    A study on diversity and distribution of fish communities and water qualities were carried out from January 2009 to December 2010 to cover monsoon and non-monsoon at Kuantan estuary, Pahang, Malaysia. A total of 19 species of primary marine fish belong to 12 families were recorded. Out of 311 individuals the fish fauna was dominated by Ariidae followed by Lutjanidae and Lactaridae. As such Ariidae contributes 50% of the fish caught in the study area and its diversity index (H') was 0.97. A The Ariidae family consist of four (4) species; Arius maculatus, Arius sumatranus, Arius tenuispinis and Arius thalassinus. The Ariidae family can be found in all stations as they are euryhaline (highly tolerant to salinity) and this fish family are known to be a hardy estuarine catfish. Among all species in family Ariidae, Arius thalassinus was the most dominant (23%) among all species. As such collected species showed highest species diversity (0.34) followed by Arius tenuispinis (0.25) compared to other species. Arius tenuispinis alone contributed 11.90% among the samples caught from all stations. The fishes were caught and recorded highest in September-December. Pseudorhombus quinque ocellatus, Nibea soldado, Sardinella fimbriata, Toxotes jaculatrix, Dasyatis ushiei, Setipinna taty were the least dominant in the Kuantan estuary with 9.33% of total abundance. Physico-temperatures, such as temperature (22.03-30 degrees C), Conductivity (10.342.43 mS cm(-1)), TDS (0.06-26.34 mg L(-1)), salinity (0.05-29.09 ppt), DO (6.37-8.38 mg L(-1)), pH (4.97-8.03), Chl a (0.01-1.33 microg L(-1)), nitrite (0.01-0.08 mg L(-1)), nitrate (0.60-0.88 mg L(-1)), phosphate (0.24-0.40 mg L(-1)). Nevertheless, the study envisages that the water quality and fish diversity are still conducive in the Kuantan estuary. The fish diversity of Pahang estuary was high monsoon compared to non-monsoons. The station 4 (LKIM fishing boat jetty and adjacent Hospital Kuantan) is the most polluted area due to the presence of several outskirts could be alarming for the sustainable development of fish and other aquatic organisms in Kuantan estuary in the long run.
    Matched MeSH terms: Temperature
  4. Determination of physical processes influencing Chl a distribution using remotely sensed images
    Mustapha AM, Lihan T, Saitoh S
    Pak J Biol Sci, 2011 Jan 15;14(2):82-90.
    PMID: 21916257
    In management of the Japanese scallop Mizuhopecten yessoensis culture, it is important to understand the phytoplankton bloom development in the coastal region of the Okhotsk Sea. Variations in food available to this benthic bivalve are a primary environmental factor affecting growth in nature. This paper determined the seasonal variability of Chlorophyll a (Chl a) at the scallop farming region in the Okhotsk Sea from 1998 to 2004 using satellite imageries. Satellite images were processed using default NASA coefficients and community-standard algorithms as implemented by Sea DAS. Spatial and temporal variation of Chl a was determined by EOF analysis. The Chl a concentration showed high seasonal and interannual variability. Peak of Chl a concentration occurred in spring followed by autumn and summer. This was evident in the Empirical Orthogonal Function (EOF) analysis. The spatial pattern of the first mode of EOF analysis of Chl a revealed intensified Chl a at the shelf and offshore areas in spring and autumn (51.8% of variance). The second mode explained 14.2% of the variance indicating enhancement of spring (April-May) Chl a pattern in the frontal area along the coast. Meanwhile, the third mode captured 9.0% of the variability demonstrating high Chl a extending seaward from the shelf area during late autumn. These seasonal variability of Chl a resulted from the variability in occurrences of physical processes associated with retreat of sea ice in spring, advection of Soya Warm Current in summer and intrusion of East Sakhalin Current in autumn.
    Matched MeSH terms: Temperature
  5. Effect of some environmental parameters on biobutanol production by Clostridium acetobutylicum NCIMB 13357 in date fruit medium
    Khamaiseh EI, Hamid AA, Yusoff WM, Kalil MS
    Pak J Biol Sci, 2013 Oct 15;16(20):1145-51.
    PMID: 24506014
    Date fruit juice contains high concentration of simple sugars ranging from 65 to 75% (w/w) in dry form. In this study, the potential of date fruit juice as biobutanol fermentation medium by C. acetobutylicum was investigated. The fermentation process was carried out at initial pH of 5, 6 and 7, incubation temperature of 30, 35 and 40 degrees C for 72 hours. The date fruit concentrations tested were 10, 20, 30 and 40 g L(-1). Medium containing 30 g L(-1) of date fruit at 35 degrees C incubation temperature with initial medium pH 7.0 gave the highest concentration of solvents of 3.1, 0.1 and 1.1 g L(-1) butanol, ethanol and acetone respectively. The yield and productivity of biobutanol were 0.32 g g(-1) and 0.044 g L(-1)/h respectively, while for total ABE were 0.45 g g(-1) and 0.06 g L(-1) h, respectively.
    Matched MeSH terms: Temperature
  6. Optimization of temperature, moisture content and inoculum size in solid state fermentation to enhance mannanase production by Aspergillus terreus SUK-1 using RSM
    Rashid JI, Samat N, Mohtar W, Yusoff W
    Pak J Biol Sci, 2011 May 01;14(9):533-9.
    PMID: 22032082
    Optimization of three parameters, temperature (25-35 degrees C), moisture content (40% (w/v)-60% (w/v) and inoculum sizes (5% (w/v)-15% (w/v) were investigated and optimized by Response Surface Methodology (RSM) for optimal mannanase production by Aspergillus terreus SUK-1. A second order polynomial equation was fitted and the optimum condition was established. The result showed that the moisture content was a critical factor in terms of its effect on mannanase. The optimum condition for mannanase production was predicted at 42.86% (w/v) initial moisture (31 C) temperature and 5.5% (w/v) inoculum size. The predicted optimal parameter were tested in the laboratory and the mannanase activity 45.12 IU mL-1 were recorded to be closed to the predicted value (44.80 IU mL-1). Under the optimized SSF condition (31 degrees C, 42.86% moisture content (w/v) and 5.5% inoculum size (w/v)), the maximum mannanase production was to prevail about 45.12 IU mL-1 compare to before optimized (30 degrees C, 50% moisture content (w/v) and 10% inoculum size (w/v)) was only 34.42 IU mL-1.
    Matched MeSH terms: Temperature
  7. Effect of Different Disinfecting Agents on Surface Roughness and Color Stability of Heat-cure Acrylic Denture Material: An In Vitro Study
    Kannaiyan K, Rakshit P, Bhat MPS, Sadasiva SKK, Babu SC, Ummer H
    J Contemp Dent Pract, 2023 Nov 01;24(11):891-894.
    PMID: 38238278 DOI: 10.5005/jp-journals-10024-3563
    AIM: The current study aimed to determine the impact of three different disinfectants on the surface roughness and color stability of heat-cure acrylic denture material.

    MATERIALS AND METHODS: Using a stainless-steel mold, disc-shaped wax patterns with dimensions of 10 mm in diameter and 2 mm thick (in accordance with ADA Specification No. 12) were created and prepared for a total of 75 acrylic samples. Dimensions of all 75 acrylic samples were checked with a digital Vernier caliper. About 25 samples of denture base material were immersed in three different chemical disinfectants: Group I: immersed in chlorhexidine gluconate solution, group II: immersed in sodium hypochlorite solution, and group III: immersed in glutaraldehyde solution. All samples were scrubbed daily for 1 minute with the appropriate disinfectant and submerged for 10 minutes in the same disinfectant. Between disinfection cycles, samples were kept in distilled water at 37°C. Color stability was measured using a reflection spectrophotometer. Surface roughness values were measured by a profilometer at baseline following 15 days and 30 days.

    RESULTS: After 15 days, the color stability was better in chlorhexidine gluconate solution group (4.88 ± 0.24) than sodium hypochlorite solution (4.74 ± 0.18) and glutaraldehyde solution group (4.46 ± 0.16). The mean surface roughness was less in glutaraldehyde solution group (2.10 ± 0.19), followed by chlorhexidine gluconate solution group (2.48 ± 0.09) and sodium hypochlorite solution group (2.64 ± 0.03). After 30 days, the color stability was significantly better in chlorhexidine gluconate solution group (4.40 ± 0.02), followed by sodium hypochlorite solution (4.06 ± 0.16) and glutaraldehyde solution group (3.87 ± 0.17). The mean surface roughness was significantly lesser in glutaraldehyde solution group (2.41 ± 0.14), followed by chlorhexidine gluconate solution group (2.94 ± 0.08) and sodium hypochlorite solution group (3.02 ± 0.13).

    CONCLUSION: In conclusion, the color stability was significantly better in chlorhexidine gluconate solution group than sodium hypochlorite solution and glutaraldehyde solution group. But the surface roughness was significantly lesser in the glutaraldehyde solution group, followed by the chlorhexidine gluconate and sodium hypochlorite solution group.

    CLINICAL SIGNIFICANCE: The maintenance of the prosthesis requires the use of a denture disinfectant; therefore, it is crucial to select one that is effective but would not have a negative impact on the denture base resin's inherent characteristics over time. How to cite this article: Kannaiyan K, Rakshit P, Bhat MPS, et al. Effect of Different Disinfecting Agents on Surface Roughness and Color Stability of Heat-cure Acrylic Denture Material: An In Vitro Study. J Contemp Dent Pract 2023;24(11):891-894.

    Matched MeSH terms: Hot Temperature
  8. Fulltext Valorization of alum sludge via a pyrolysis platform using CO2 as reactive gas medium
    Choi D, Oh JI, Lee J, Park YK, Lam SS, Kwon EE
    Environ Int, 2019 11;132:105037.
    PMID: 31437646 DOI: 10.1016/j.envint.2019.105037
    In an effort to seek a new technical platform for disposal of drinking water treatment sludge (DWTS: alum sludge), pyrolysis of DWTS was mainly investigated in this study. To establish a more sustainable thermolytic platform for DWTS, this study particularly employed CO2 as reactive gas medium. Thus, this study laid great emphasis on elucidating the mechanistic roles of CO2 during the thermolysis of DWTS. A series of the TGA tests of DWTS in CO2 in reference to N2 revealed no occurrence of the heterogeneous reaction between CO2 and the sample surface of DWTS. As such, at the temperature regime before initiating the Boudouard reaction (i.e., ≥700 °C), the mass decay patterns of DWTS in N2 and CO2 were nearly identical. However, the gaseous effluents from lab-scale pyrolysis of DWTS in CO2 in reference to N2 were different. In sum, the homogeneous reactions between CO2 and volatile matters (VMs) evolved from the thermolysis of DWTS led to the enhanced generation of CO. Also, CO2 suppressed dehydrogenation of VMs. Such the genuine mechanistic roles of CO2 in the thermolysis of DWTS subsequently led to the compositional modifications of the chemical species in pyrolytic oil. Furthermore, the biochar composite was obtained as byproduct of pyrolysis of DWTS. Considering that the high content of Al2O3 and Fe-species in the biochar composite imparts a strong affinity for As(V), the practical use of the biochar composite as a sorptive material for arsenic (V) was evaluated at the fundamental levels. This work reported that adsorption of As(V) onto the biochar composite followed the pseudo-second order model and the Freundlich isotherm model.
    Matched MeSH terms: Temperature
  9. Bio-inspired magnetic chitosan/Iron oxide macromolecules for multiple anionic dyes adsorption from aqueous media
    Vijayasree VP, Abdul Manan NS
    Int J Biol Macromol, 2024 Oct;277(Pt 1):134103.
    PMID: 39047997 DOI: 10.1016/j.ijbiomac.2024.134103
    Organic anionic dyes are major water pollutants due to their low degradability caused by complex aromatic structures. Not only do they exert toxic, mutagenic, teratogenic, tumorigenic, and genotoxic effects, but they also decrease fertility and cause irritation to the skin and respiratory system in humans. This long-term toxicity has detrimental effects on aquatic organisms and their surroundings, resulting in an imbalanced ecosystem. In this study, a Cs@Fe3O4 magnetic biosorbent was synthesised to uptake three anionic dyes and characterised for FTIR, BET/BJH, XRD, TGA, VSM, and FESEM analyses. The biosorbent average surface area was confirmed to be 52.6524 m2/g, with average pore sizes of 7.3606 nm and 6.9823 nm for adsorption-desorption processes, respectively. Batch adsorption studies pH values, contact times, temperature, initial dye concentrations, and adsorbent dosages were examined. Several isotherm and kinetic models were studied to determine the adsorption mechanism. The adsorption data of these dyes at equilibrium was observed to match Langmuir's isotherm and pseudo-second-order kinetic models. The thermodynamic study revealed that the adsorption process for these dyes was an exothermic reaction. Maximum adsorption capacities for congo red, methyl orange, and metanil yellow were 117.77 mg/g, 137.77 mg/g, and 155.57 mg/g, respectively. The reusability of recovered Cs@Fe3O4 after dye adsorption was evaluated up to five continuous adsorption-desorption cycles for its possible industrial applications.
    Matched MeSH terms: Temperature
  10. The life history of a colony of Leptotrombidium (Leptotrombidium) fletcheri (Womersley & Heaslip) infected with Rickettsia tsutsugamushi
    Dohany AL, Upham RW, Manikumaran C, Rapmund G, Saunders JP
    Southeast Asian J Trop Med Public Health, 1977 Jun;8(2):221-6.
    PMID: 411178
    The life cycle of 5 generations of Leptotrombidium (L.) fletcheri infected with Rickettsia tsutsugamushi and reared under ambient temperatures in Malaysia was presented and compared with a colony reared at a constant 27 degrees C (Neal and Barnett, 1961). In general our colony had a longer generation time (average of 54 days from engorged larvae to adult compared with 37 days) and produced fewer eggs (average of 127.9 compared with 900.0) than the comparison colony. Possible factors causing these differences are discussed.
    Matched MeSH terms: Temperature
  11. Uniocular blindness following thermal injury
    Ayanniyi AA, Fasasi MK
    Malays J Med Sci, 2013 Jan;20(1):88-91.
    PMID: 23613660
    A hot water burn is a thermal injury that results in cell death. Thermal eye injury triggers inflammatory processes, including inflammatory cell influx and/or the activation of various inflammatory cells, which result in the rapid accumulation of extravascular fluid in the ocular tissue. The ocular effect depends on the temperature of the water, and the final visual outcome depends on the severity of the damage to the intraocular structures. We report a 23-year-old woman who experienced a facial hot water burn that resulted in blindness. The patient presented late to the hospital after the unsuccessful use of traditional medication. Facial burns are a known cause of blindness. Public health education on prompt hospital presentation, and resistance to the use of potentially harmful traditional medicine in facial burns is suggested.
    Matched MeSH terms: Temperature
  12. Fulltext Evaluation of the safety of domestic food preparation in Malaysia
    Desmarchelier PM, Apiwathnasorn C, Vilainerun D, Watson C, Johari MR, Ahmad Z, et al.
    Bull World Health Organ, 1994;72(6):877-84.
    PMID: 7867133
    Food-handling practices were studied in 119 and 158 households, respectively, in an urban and a rural community in Peninsular Malaysia. Hazard analyses, including microbiological analysis of foods, were carried out in two households in each community and in a house that prepared food for distribution in the urban area. Kitchen hygiene was generally acceptable, although rated "poor" in some instances in the rural area. Food prepared for lunch was usually sufficient for dinner also, the leftover items being stored at ambient temperature until required. In the house that prepared food for distribution, breakfast was prepared during the evening, stored at ambient temperature overnight, and reheated before sale the next morning. There was a local preference for cooking food at temperatures close to boiling point; this reduced the numbers of vegetative cells but not those of spores. In some stored foods the populations of Staphylococcus aureus, Bacillus cereus and mesophilic aerobic bacteria increased, the last-mentioned reaching spoilage levels. Reheating reduced the populations of proliferating bacteria in most foods to acceptable levels but would not have destroyed heat-resistant enterotoxins. Because of their importance in combating acute bacterial foodborne disease, the control of the temperature and time factors during the cooking and storage of food should receive special attention in education on health and food safety.
    Matched MeSH terms: Temperature
  13. Revolutionizing photocatalysis: Synthesis of innovative poly(N-tertiary-butylacrylamide)-graft-hydroxypropyl cellulose polymers for thermo-responsive applications via metal-free organic photoredox catalysis
    Iqbal MA, Younis MW, Maqbool M, Goh HH, Kurniawan TA, Amjad M, et al.
    Int J Biol Macromol, 2025 Feb;288:138775.
    PMID: 39675599 DOI: 10.1016/j.ijbiomac.2024.138775
    In this study, we present a groundbreaking approach utilizing metal-free, visible light-mediated organic photoredox catalyzed atom transfer radical polymerization (O-ATRP) to synthesize cellulose-based stimuli-responsive polymers. Our method resulted in the successful synthesis of innovative metal-free poly(N-tertiary-butylacrylamide)-graft-hydroxypropyl cellulose (PNTBAM-g-HPC) polymers with exceptional control over molecular weight and narrow dispersity index (Đ) and explored their applications in organo-photocatalytic reactions. This approach addresses the limitations of traditional atom transfer radical polymerization method, which suffer from metal contamination and toxicity related problems. O-ATRP and organic photoredox catalysts have been sought to address these difficult challenges. In this study, we synthesized organic compound; 2,4,5,6-tetrakis(diphenylamino)isophthalonitrile (4DPIPN), which served as an organic photoredox catalyst, enabling the synthesis and application study of PNTBAM-g-HPC polymers via organic photoredox catalysis. Furthermore, by employing 4DPIPN, three different types of PNTBAM-g-HPC polymers were synthesized. Through thorough characterization techniques including FTIR, NMR, UV/Visible spectroscopy, TGA, and GPC analysis, we confirmed the successful synthesis of photocatalyst and three different types of PNTBAM-g-HPC polymers under O-ATRP conditions. By adjusting the molar ratios of PNTBAM side chains, we fine-tuned the LCST of HTA-20 polymers to 37.3 °C, demonstrating their thermoresponsive behavior. This synthetic approach shows great potential for applications in biosensors, pharmaceuticals, biomedical engineering, and drug delivery systems.
    Matched MeSH terms: Temperature
  14. Effects of ultraviolet light (UV-C) and heat treatment on the quality of fresh-cut Chokanan mango and Josephine pineapple
    George DS, Razali Z, Santhirasegaram V, Somasundram C
    J Food Sci, 2015 Feb;80(2):S426-34.
    PMID: 25586772 DOI: 10.1111/1750-3841.12762
    The effects of ultraviolet (UV-C) and medium heat (70 °C) treatments on the quality of fresh-cut Chokanan mango and Josephine pineapple were investigated. Quality attributes included physicochemical properties (pH, titratable acidity, and total soluble solids), ascorbic acid content (vitamin C), antioxidant activity, as well as microbial inactivation. Consumers' acceptance was also investigated through sensory evaluation of the attributes (appearance, texture, aroma and taste). Furthermore, shelf-life study of samples stored at 4 ± 1 °C was conducted for 15 d. The fresh-cut fruits were exposed to UV-C for 0, 15, 30, and 60 min while heat treatments were carried out at 70 °C for 0, 5, 10 and 20 min. Both UV-C and medium heat treatments resulted in no significant changes to the physicochemical attributes of both fruits. The ascorbic acid content of UV-C treated fruits was unaffected; however, medium heat treatment resulted in deterioration of ascorbic acids in both fruits. The antioxidants were enhanced with UV-C treatment which could prove invaluable to consumers. Heat treatments on the other hand resulted in decreased antioxidant activities. Microbial count in both fruits was significantly reduced by both treatments. The shelf life of the fresh-cut fruits were also successfully extended to a maximum of 15 d following treatments. As for consumers' acceptance, UV-C treated fruits were the most accepted as compared to their heat-treated counterparts. The results obtained through this study support the use of UV-C treatment for better retention of quality, effective microbial inactivation and enhancement of health promoting compounds for the benefit of consumers.
    Matched MeSH terms: Hot Temperature*
  15. Combined pretreatment using alkaline hydrothermal and ball milling to enhance enzymatic hydrolysis of oil palm mesocarp fiber
    Zakaria MR, Hirata S, Hassan MA
    Bioresour Technol, 2014 Oct;169:236-43.
    PMID: 25058299 DOI: 10.1016/j.biortech.2014.06.095
    Hydrothermal pretreatment of oil palm mesocarp fiber was conducted in tube reactor at treatment severity ranges of log Ro = 3.66-4.83 and partial removal of hemicellulose with migration of lignin was obtained. Concerning maximal recovery of glucose and xylose, 1.5% NaOH was impregnated in the system and subsequent ball milling treatment was employed to improve the conversion yield. The effects of combined hydrothermal and ball milling pretreatments were evaluated by chemical composition changes by using FT-IR, WAXD and morphological alterations by SEM. The successful of pretreatments were assessed by the degree of enzymatic digestibility of treated samples. The highest xylose and glucose yields obtained were 63.2% and 97.3% respectively at cellulase loadings of 10 FPU/g-substrate which is the highest conversion from OPMF ever reported.
    Matched MeSH terms: Temperature*
  16. A physicochemical investigation of membrane fouling in cold microfiltration of skim milk
    Tan TJ, Wang D, Moraru CI
    J Dairy Sci, 2014;97(8):4759-71.
    PMID: 24881794 DOI: 10.3168/jds.2014-7957
    The main challenge in microfiltration (MF) is membrane fouling, which leads to a significant decline in permeate flux and a change in membrane selectivity over time. This work aims to elucidate the mechanisms of membrane fouling in cold MF of skim milk by identifying and quantifying the proteins and minerals involved in external and internal membrane fouling. Microfiltration was conducted using a 1.4-μm ceramic membrane, at a temperature of 6±1°C, cross-flow velocity of 6m/s, and transmembrane pressure of 159kPa, for 90min. Internal and external foulants were extracted from a ceramic membrane both after a brief contact between the membrane and skim milk, to evaluate instantaneous adsorption of foulants, and after MF. Four foulant streams were collected: weakly attached external foulants, weakly attached internal foulants, strongly attached external foulants, and strongly attached internal foulants. Liquid chromatography coupled with tandem mass spectrometry analysis showed that all major milk proteins were present in all foulant streams. Proteins did appear to be the major cause of membrane fouling. Proteomics analysis of the foulants indicated elevated levels of serum proteins as compared with milk in the foulant fractions collected from the adsorption study. Caseins were preferentially introduced into the fouling layer during MF, when transmembrane pressure was applied, as confirmed both by proteomics and mineral analyses. The knowledge generated in this study advances the understanding of fouling mechanisms in cold MF of skim milk and can be used to identify solutions for minimizing membrane fouling and increasing the efficiency of milk MF.
    Matched MeSH terms: Cold Temperature*
  17. Interesterification of engkabang (Shorea macrophylla) fat--canola oil blend with lipase from Candida antarctica to simulate the properties of lard
    Illiyin MR, Marikkar JM, Loke MK, Shuhaimi M, Mahiran B, Miskandar MS
    J Oleo Sci, 2014;63(1):39-46.
    PMID: 24389796
    A study was carried out to compare the composition and thermal properties of lard (LD) and engkabang fat (EF) - canola oil (CaO) blend interesterified with Candida antartica lipase (C. antartica). A fat blend EF-4 (40% EF in CaO) was prepared and interesterified using C. antartica lipase at 60°C for different time intervals (6 h, 12 h and 24 h) with 200 rpm agitation. The fat blends before and after interesterification were compared to LD with respect to their slip melting points (SMP), fatty acid and triacyglycerol (TAG) compositions, melting, solidification and polymorphic properties. Result showed that the slip melting point (SMP) of the fat blend interesterified for 6 h was the closest to that of LD. The solid fat content (SFC) values of fat blends interesterified for 12 and 24 h were found to become equal to those of LD within the temperature range of 0 to 20°C. In addition, all three interesterified blends had SFC values similar to those of LD within the temperature range of 30-40°C. According to thermal analysis, the transition of the fat blend interesterified for 24 h appearing at -2.39°C was similar to the low melting thermal transition of LD and the transition of the fat blend interesterified for 12 h appearing at 26.25°C was similar to the high melting thermal transition of LD. However, there is no compatibility between LD and all three interesterified blends with regard to polymorphic behaviour.
    Matched MeSH terms: Temperature; Transition Temperature
  18. Chemical composition and cellular toxicity of ethnobotanical-based hot and cold aqueous preparations of the tiger's milk mushroom (Lignosus rhinocerotis)
    Lau BF, Abdullah N, Aminudin N, Lee HB
    J Ethnopharmacol, 2013 Oct 28;150(1):252-62.
    PMID: 23993912 DOI: 10.1016/j.jep.2013.08.034
    The sclerotium of the "tiger's milk mushroom" (Lignosus rhinocerotis) is used as tonic and folk medicine for the treatment of cancer, fever, cough and asthma by the local and indigenous communities. It is traditionally prepared by either boiling or maceration-like methods; however, there is no attempt to understand how different processing methods might affect their efficacies as anticancer agents.
    Matched MeSH terms: Cold Temperature; Hot Temperature
  19. Accumulation of trace metals in the embryos and hatchlings of Chelonia mydas from Peninsular Malaysia incubated at different temperatures
    Ikonomopoulou MP, Olszowy H, Francis R, Ibrahim K, Whittier J
    Sci Total Environ, 2013 Apr 15;450-451:301-6.
    PMID: 23500829 DOI: 10.1016/j.scitotenv.2013.02.031
    A variety of trace metals were measured in the egg contents of three clutches of Chelonia mydas collected from Kuala Terengganu state in Peninsular Malaysia. We quantified Mn, Cu, Zn, Se (essential trace metals) and As (anthropogenic pollutant) at several developmental stages obtained by incubating eggs at two different temperatures (27 °C and 31 °C). The incubation temperatures were chosen because they produce predominantly male or predominantly female hatchlings, respectively. The eggs were removed from the sand and washed before being placed in incubators, to ensure that the only possible source of the detected metals was maternal transfer. Other metals: Mo, Co, Ni, Cd, Sn, Sb, Hg, Tl and Pb (all non-essential metals) were detected at concentrations below the lower limit of quantitation (LLOQ). Trace metal concentrations, particularly [Zn], increased during development, other metals (Cu, As, Se and Cr) accumulated to a lesser degree than zinc but no significant differences were observed between the incubation temperatures at any stage of incubation. To date, only a few studies on trace metals in turtle embryos and hatchlings have been reported; this study will provide basic knowledge on the accumulation of trace metals during development at two different incubation temperatures.
    Matched MeSH terms: Hot Temperature*
  20. Fabrication and mechanical properties of Al2O3/SiC/ZrO2 functionally graded material by electrophoretic deposition
    Askari E, Mehrali M, Metselaar IH, Kadri NA, Rahman MM
    J Mech Behav Biomed Mater, 2012 Aug;12:144-50.
    PMID: 22732480 DOI: 10.1016/j.jmbbm.2012.02.029
    This study describes the synthesis of Al(2)O(3)/SiC/ZrO(2) functionally graded material (FGM) in bio-implants (artificial joints) by electrophoretic deposition (EPD). A suitable suspension that was based on 2-butanone was applied for the EPD of Al(2)O(3)/SiC/ZrO(2), and a pressureless sintering process was applied as a presintering. Hot isostatic pressing (HIP) was used to densify the deposit, with beneficial mechanical properties after 2 h at 1800 °C in Ar atmosphere. The maximum hardness in the outer layer (90 vol.% Al(2)O(3)+10 vol.% SiC) and maximum fracture toughness in the core layer (75 vol.% Al(2)O(3)+10 vol.% SiC + 15 vol.% ZrO(2)) composite were 20.8±0.3 GPa and 8±0.1 MPa m(1/2), respectively. The results, when compared with results from Al(2)O(3)/ZrO(2) FGM, showed that SiC increased the compressive stresses in the outer layers, while the inner layers were under a residual tensile stress.
    Matched MeSH terms: Hot Temperature; Temperature
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links