Chilies are usually packed and stored after harvesting for sale, which can result in quality loss and affect the edibility of the product. This study aimed to determine the effect of temperature on the physicochemical properties of red and green chilies during postharvest storage at three different temperatures (0, 5, and 25°C). The physicochemical analysis of chilies was conducted for 9 days to determine color changes, texture, pH, total soluble solids, and total phenolic content (TPC). All test data were statistically analyzed using two-way analysis of variance and Pearson's correlation coefficient to determine the relationship between physicochemical properties and the TPC. The study found that the TPC values decreased significantly at all temperatures for both red and green chilies. At 5°C, the TPC values were 3.42 mg GAE/g extract and 2.23 mg GAE/g extract for red and green chilies, respectively. The red chilies showed the lowest values of texture and TPC at 0°C, indicating poor preservation. The green chilies at 0°C had higher TPC values (4.74 mg GAE/g extract) but suffered from high firmness loss, whereas 25°C led to microbial growth. Therefore, the overall quality and market acceptability of both red and green chilies were ideal at 5°C due to better preservation of physical appearance. In conclusion, the ideal storage condition at 5°C can reduce qualitative and postharvest losses of red and green chilies by maintaining better texture and acceptable TPC values.
Specific spoilage organisms (SSOs) are the key factors affecting the deterioration of large yellow croaker. This study investigated the antibacterial activity and mechanism of Zinc oxide nanoparticles (ZnO-NPs) against Shewanella putrefaciens. The effects of different concentrations of ZnO-NPs (0.5, 1, 2 mg/mL) combined with seawater slurry ice preservation on storage quality and microbial community of large yellow croaker were further investigated. The results showed that ZnO-NPs had a strong antibacterial effect on Shewanella putrefaciens, which destroyed the integrity of the cell membrane, resulting in nucleic acid leakage and increased electrical conductivity. In addition, ZnO-NPs could effectively inhibit the proliferation of microorganisms, slow down the rate of lipid oxidation, delay the rise of pH value and total volatile basic nitrogen, and maintain the color of fish. Among them, 2 mg/mL ZnO-NPs treatment showed the best preservation effect on large yellow croaker. High-throughput sequencing results showed that Pseudoalteromonas and Shewanella became the dominant spoilage bacteria with the extension of storage time. ZnO-NPs significantly reduced the relative abundance of dominant spoilage bacteria and changed the microbial composition of fish. Inhibition of the growth of SSOs was important for delaying spoilage and prolonging the shelf-life of large yellow croaker. Therefore, ZnO-NPs combined with seawater slurry ice preservation could be used as a new storage method, which provides a new idea for food quality and safety control.
Optimizing environmental factors can significantly increase the growth and secondary metabolite synthesis of hydroponically grown medicinal plants. This approach can help increase the quality and quantity of pharmacologically important metabolites to enhance therapeutic needs. Medicinal plants are key therapeutic sources for treating various ailments. The increasing demand for medicinal plants has resulted in the overharvesting of these plants in their natural habitat, which can lead to their extinction in the future. Soil-based cultivation faces challenges, such as a lack of arable land, drastic climatic changes, and attacks by soil-borne pathogens. To overcome these challenges, hydroponic cultivation, known as soilless cultivation, is a sustainable method. The yield and quality of medicinal plants depend on environmental factors, such as nutrients, pH, electrical conductivity, temperature, light, nanoparticles, phytohormones, and microorganisms. This article explores the impact of these environmental factors on the growth and secondary metabolite content of hydroponically grown medicinal plants. Our review reveals how environmental factors qualitatively and quantitatively influence the growth and secondary metabolites of medicinal plants grown in hydroponic systems and how these factors can be integrated into the enhancement of therapeutic compounds.
The textile industry is a major contributor to water pollution, releasing effluents containing 10-15% unused synthetic dyes. These dyes have complex aromatic structures that resist biodegradation, posing serious risks to aquatic ecosystems and human health. This study evaluated the physicochemical properties of wastewater from the Maa Garment Textile Factory and investigated the bioremediation potential of indigenous bacterial isolates. Effluent samples collected from different treatment points were analyzed for pH, temperature, total suspended solids (TSS), total dissolved solids (TDS), biological oxygen demand (BOD), and chemical oxygen demand (COD). The wastewater exhibited a neutral to slightly alkaline pH (7.2-7.5), favorable for microbial activity, but had elevated temperatures (up to 38 °C) and high TDS (2633-2866 mg/L), indicating thermal and chemical pollution. A total of 30 bacterial isolates were screened for their ability to biodegrade reactive red, blue, and yellow dyes under varying conditions of temperature (25-40 °C), pH (5-9), and dye concentration (50-150 mg/L). Sixteen isolates demonstrated biodegradation capacity, with optimal performance (mean 89.4%) observed at 37 °C, pH 7, and 50 mg/L dye concentration, and significant variation across tested conditions (p
The purpose of this research is to synthesize environmentally friendly nanosorbents for the novel adsorption of diesel range organics (DRO) from contaminated water. Central composite design (CCD) analysis of response surface methodology (RSM) was employed in a model fitting of the variables predicting the adsorption efficiency of Moringa oleifera-functionalized zerovalent iron particles (ZINPs) for the removal of DRO. The effects of the reaction parameters on the response were screened using 24 factorial designs to determine the statistically significant independent variables. A quadratic model predicting the DRO adsorption efficiency of ZINPs with an F value of 276.84 (p value
Water bodies with the dye methylene blue pose serious environmental and health risks to humans. Therefore, the creation and investigation of affordable, potential adsorbents to remove methylene blue dye from water resources as a long-term fix is one focus of the scientific community. Food plants and other carbon-source serve as a hotspot for a wider range of application on different pollutants that impact the environment and living organisms. Here, we reviewed the use of treated and untreated biosorbents made from plant waste leaves for removing the dye methylene blue from aqueous media. After being modified, activated carbon made from various plant leaves improves adsorption performance. The range of activating chemicals, activation methods, and bio-sorbent material characterisation using FTIR analysis, Barunauer-Emmett-Teller (BET) surface area, scanning electron microscope (SEM-EDX), and SEM-EDX have all been covered in this review. It has been thoroughly described how the pH solution of the methylene blue dye compares to the pHPZC of the adsorbent surface. The presentation also includes a thorough analysis of the application of the isotherm model, kinetic model, and thermodynamic parameters. The selectivity of the adsorbent is the main focus of the adsorption kinetics and isotherm models. It has been studied how adsorption occurs, how surface area and pH affect it, and how biomass waste compares to other adsorbents. The use of biomass waste as adsorbents is both environmentally and economically advantageous, and it has been discovered to have exceptional color removal capabilities.
Enzymes are often required to function in a particular reaction condition by the industrial procedure. In order to identify critical residues affecting the optimum pH of Staphylococcal lipases, chimeric lipases from homologous lipases were generated via a DNA shuffling strategy. Chimeric 1 included mutations of G166S, K212E, T243A, H271Y. Chimeric 2 consisted of substitutions of K212E, T243A, H271Y. Chimeric 3 contained substitutions of K212E, R359L. From the screening results, the pH profiles for chimeric 1 and 2 lipases were shifted from pH 7 to 6. While the pH of chimeric 3 was shifted to 8. It seems the mutation of K212E in chimeric 1 and 2 decreased the pH to 6 by changing the electrostatic potential surface. Furthermore, chimeric 3 showed 10 ˚C improvement in the optimum temperature due to the rigidification of the catalytic loop through the hydrophobic interaction network. Moreover, the substrate specificity of chimeric 1 and 2 was increased towards the longer carbon length chains due to the mutation of T243A adjacent to the lid region through increasing the flexibility of the lid. Current study illustrated that directed evolution successfully modified lipase properties including optimum pH, temperature and substrate specificity through mutations, especially near catalytic and lid regions.
The applications of polysulfides derived from natural plant oil and sulfur via the inverse vulcanization in the removal of heavy metals from aqueous solutions suffered from their low porosity and scarce surface functionality because of their hydrophobic surfaces and bulk characteristics. In this study, polysulfides from sulfur and palm oil (PSPs) with significantly enhanced porosity (13.7-24.1 m2/g) and surface oxygen-containing functional groups (6.9-8.6 wt.%) were synthesized with the optimization of process conditions including reaction time, temperature, and mass ratios of sulfur/palm oil/NaCl/sodium citrate. PSPs were applied as sorbents to remove heavy metals present in aqueous solutions. The integration of porosity and oxygen modification allowed a fast kinetic (4.0 h) and enhanced maximum sorption capacities for Pb(II) (218.5 mg/g), Cu(II) (74.8 mg/g), and Cr(III) (68.4 mg/g) at pH 5.0 and T 298 K comparing with polysulfides made without NaCl/sodium citrate. The sorption behaviors of Pb(II), Cu(II), and Cr(III) on PSPs were highly dependent on the solution pH values and ionic strength. The sorption presented excellent anti-interference capability for the coexisting cations and anions. The sorption processes were endothermic and spontaneous. This work would guide the preparation of porous polysulfides with surface modification as efficient sorbents to remediate heavy metals from aqueous solutions.
This study highlights the biosorption capacity for Cd (II), Cu (II) and Pb (II) by a locally isolated Pseudomonas aeruginosa DR7. At initial concentrations of 150 mg L-1 and 240 min of contact time, P. aeruginosa DR7 showed a 62.56 mg/g removal capacity for Cd (II) at an optimum pH of 6.0, 72.49 mg/g for Cu (II) at an optimum pH of 6.0, and 94.2 mg/g for Pb (II) at an optimum pH of 7.0. The experimental data of Cd (II), Cu (II), and Pb (II) adsorbed by the pseudo-second-order kinetic model correlates well with P. aeruginosa DR7, with R2 all above 0.99, showing that the fitting effect was satisfactory. The isothermal adsorption processes of Cd (II) (0.980) and Cu (II) (0.986) were more consistent with the Freundlich model, whereas Pb (II) was more consistent with the Langmuir model (0.978). FTIR analysis suggested the involvement of hydroxyl, carbonyl, carboxyl, and amine groups present in the inner regions of P. aeruginosa cells during the biosorption process. SEM-EDS analysis revealed that after contact with metals, there were slight changes in the surface appearance of the cells, which confirmed the deposition of metals on the bacterial surface. There was also the possibility of the metals being translocated into the bacterial inner regions by the appearance of electron-dense particles, as observed using TEM. As a conclusion, the removal of metals from solutions using P. aeruginosa DR7 was a plausible alternative as a safe, cheap, and easily used biosorbent.
The adsorption of ammonium from water was studied on an activated carbon obtained using raw oil palm shell and activated with acetic acid. The performance of this adsorbent was tested at different operating conditions including the solution pH, adsorbent dosage, and initial ammonium concentration. Kinetic and equilibrium studies were carried out, and their results were analyzed with different models. For the adsorption kinetics, the pseudo-first order equation was the best model to correlate this system. Calculated adsorption rate constants ranged from 0.071 to 0.074 g/mg min. The ammonium removal was 70-80% at pH 6-8, and it was significantly affected by electrostatic interaction forces. Ammonium removal (%) increased with the adsorbent dosage, and neutral pH condition favored the adsorption of this pollutant. The best ammonium adsorption conditions were identified with a response surface methodology model where the maximum removal was 91.49% with 2.27 g/L of adsorbent at pH 8.11 for an initial ammonium concentration of 36.90 mg/L. The application of a physical monolayer model developed by statistical physics theory indicated that the removal mechanism of ammonium was multi-ionic and involved physical interactions with adsorption energy of 29 kJ/mol. This activated carbon treated with acetic acid is promising to depollute aqueous solutions containing ammonium.
This study investigates the feasibility of spent tea waste extract (STWE) as a green modifying agent for the modification of chitosan adsorbent towards aspirin removal. Response surface methodology based on Box-Behnken design was employed to find the optimal synthesis parameters (chitosan dosage, spent tea waste concentration, and impregnation time) for aspirin removal. The results revealed that the optimum conditions for preparing chitotea with 84.65% aspirin removal were 2.89 g of chitosan, 18.95 mg/mL of STWE, and 20.72 h of impregnation time. The surface chemistry and characteristics of chitosan were successfully altered and improved by STWE, as evidenced by FESEM, EDX, BET, and FTIR analysis. The adsorption data were best fitted to pseudo 2nd order, followed by chemisorption mechanisms. The maximum adsorption capacity of chitotea was 157.24 mg/g, as fitted by Langmuir, which is impressive for a green adsorbent with a simple synthesis method. Thermodynamic studies demonstrated the endothermic nature of aspirin adsorption onto chitotea.
Copolymerization is a cooperative polymerization that involves two or more different monomers that are incorporated into the same polymer chain. It allows the development of unlimited range of polymers, tunable properties and surface modifications. In this study, the oil-free base treated soybean waste was used as a biomass precursor and it was copolymerized with acrylamide through the free radical polymerization with potassium persulfate as initiator. The adsorption characteristic of the newly prepared acrylamide-soybean copolymer towards Pb(II) was studied by the use of Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDX) and thermogravimetric analysis (TGA). The adsorption conditions were optimized in terms of pH, adsorbent dosage and contact time. The Freundlich isotherm model can fit well the adsorption data obtained towards Pb(II). In comparison, the pseudo-second-order is the better fit kinetic system that explained the adsorption mechanism of Pb(II) onto the acrylamide-soybean copolymer. The adsorption capacity of the acrylamide-soybean copolymer was determined to be 22.12 mg g-1, which is comparable with the absorption capacity of other grafted polymers.
In this study, chitosan-poly(methacrylic acid-co-N-isopropylacrylamide) [chitosan-p(MAA-co-NIPAM)] hydrogels were synthesized by emulsion polymerization. In order to be used as a carrier for drug delivery systems, the hydrogels had to be biocompatible, biodegradable and multi-responsive. The polymerization was performed by copolymerize MAA and NIPAM with chitosan polymer to produce a chitosan-based hydrogel. Due to instability during synthesis and complexity of components to produce the hydrogel, further study at different times of reaction is important to observe the synthesis process, the effect of end product on swelling behaviour and the most important is to find the best way to control the hydrogel synthesis in order to have an optimal swelling behaviour for drug release application. Studied by using Fourier transform infra-red (FTIR) spectroscopy found that, the synthesized was successfully produced stable chitosan-based hydrogel with PNIPAM continuously covered the outer surface of hydrogel which influenced much on the stability during synthesis. The chitosan and PMAA increased the zeta potential of the hydrogel and the chitosan capable to control shrinkage above human body temperature. The chitosan-p(MAA-co-NIPAM) hydrogels also responses to pH and temperature thus improved the ability to performance as a drug carrier.
Spectroscopic and calorimetric methods were employed to assess the stability and the folding aspect of a novel recombinant alkaline-stable lipase KV1 from Acinetobacter haemolyticus under varying pH and temperature. Data on far ultraviolet-circular dichroism of recombinant lipase KV1 under two alkaline conditions (pH 8.0 and 12.0) at 40 °C reveal strong negative ellipticities at 208, 217, 222 nm, implying its secondary structure belonging to a α + β class with 47.3 and 39.0% ellipticity, respectively. Results demonstrate that lipase KV1 adopts its most stable conformation at pH 8.0 and 40 °C. Conversely, the protein assumes a random coil structure at pH 4.0 and 80 °C, evident from a strong negative peak at ∼ 200 nm. This blue shift suggests a general decline in enzyme activity in conjunction with the partially or fully unfolded state that invariably exposed more hydrophobic surfaces of the lipase protein. The maximum emission at ∼335 nm for pH 8.0 and 40 °C indicates the adoption of a favorable protein conformation with a high number of buried tryptophan residues, reducing solvent exposure. Appearance of an intense Amide I absorption band at pH 8.0 corroborates an intact secondary structure. A lower enthalpy value for pH 4.0 over pH 8.0 and 12.0 in the differential scanning calorimetric data corroborates the stability of the lipase at alkaline conditions, while a low Km (0.68 ± 0.03 mM) for tributyrin verifies the high affinity of lipase KV1 for the substrate. The data, herein offer useful insights into future structure-based tunable catalytic activity of lipase KV1.
The experimental set-up of this study mimicked recirculating aquaculture systems (RAS) where water quality parameters such as dissolved oxygen, pH, temperature, and turbidity were controlled and wastes produced by fish and feeding were converted to inorganic forms. A key process in the RAS was the conversion of ammonia to nitrite and nitrite to nitrate through nitrification. It was hypothesized that algae inclusion in RAS would improve the ammonia removal from the water; thereby improving RAS water quality and stability. To test this hypothesis, the stability of the microbiota community composition in a freshwater RAS with (RAS+A) or without algae (RAS-A) was challenged by introducing an acute pH drop (from pH 7 to 4 during three hours) to the system. Stigeoclonium nanum, a periphytic freshwater microalga was used in this study. No significant effect of the algae presence was found on the resistance to the acute pH drop on ammonia conversion to nitrite and nitrite conversion to nitrate. Also the resilience of the ammonia conversion to the pH drop disruption was not affected by the addition of algae. This could be due to the low biomass of algae achieved in the RAS. However, with regard to the conversion step of nitrite to nitrate, RAS+A was significantly more resilient than RAS-A. In terms of overall bacterial communities, the composition and predictive function of the bacterial communities was significantly different between RAS+A and RAS-A.
Various explants (stem, leaf, and root) of Citrus assamensis were cultured on MS media supplemented with various combinations and concentrations (0.5-2.0 mg L(-1)) of NAA and BAP. Optimum shoot and root regeneration were obtained from stem cultures supplemented with 1.5 mg L(-1) NAA and 2.0 mg L(-1) BAP, respectively. Explant type affects the success of tissue culture of this species, whereby stem explants were observed to be the most responsive. Addition of 30 gL(-1) sucrose and pH of 5.8 was most optimum for in vitro regeneration of this species. Photoperiod of 16 hours of light and 8 hours of darkness was most optimum for shoot regeneration, but photoperiod of 24 hours of darkness was beneficial for production of callus. The morphology (macro and micro) and anatomy of in vivo and in vitro/ex vitro Citrus assamensis were also observed to elucidate any irregularities (or somaclonal variation) that may arise due to tissue culture protocols. Several minor micromorphological and anatomical differences were observed, possibly due to stress of tissue culture, but in vitro plantlets are expected to revert back to normal phenotype following full adaptation to the natural environment.
Chicken breast muscle powder (CBMP) and modified waxy cornstarch (MWCS) blends were prepared at different pH conditions (pH 4, 5, 6, 7, 8, and 9). The blends were characterized by light microscopy, frequency sweep, flow analysis, and freeze-thaw stability analysis. Light microscopy showed that the blend structure was coarse at pH conditions close to the isoelectric point of protein and became finer with increasing pH. Frequency sweep demonstrated that the blend was more liquid-like with relatively lower storage (G') and loss (G'') moduli as the pH was increased from pH 4 to pH 9. Flow analysis revealed that thixotropy behavior was evident in samples treated at pHs 4 and 5, whereas antithixotropy was shown by those adjusted to pHs 6, 7, 8, and 9. The CBMP-MWCS blends were found to show better freeze-thaw stability at pH 8 that could be attributed to the formation of a highly interactive network structure of CBMP and MWCS.
Studies show that the pH of the malaria parasite's digestive vacuole (DV) plays a key role in the physiological functions of this organelle and antimalarial drug accumulation, and yet is technically difficult to measure. In this study, a flow cytometry-based technique was developed to measure the DV pH using a ratiometric pH indicator, FITC-dextran loaded into the DV of saponin-permeabilized parasites. To calculate the DV pH, a standard pH calibration curve was generated by incubating the saponin-permeabilized cells in buffers with different pH in the presence of an ionophore, CCCP. The measured average pH of the DV was 5.27 ± 0.03 that is approximately the same in the parasites observed microscopically by Hayward et al. (2006) (5.50 ± 0.14) using the same probe. The removal of glucose from the medium, causing a rapid depletion of parasite ATP, resulted in an alkalization of the DV. The DV was reacidified upon restoration of glucose to the medium. This technique provides a rapid, simple and quantitative measurement of the DV pH on a large number of cells. It will also be useful in future attempts to evaluate the effect of antimalarial drugs (i.e. chloroquine and artemisinin-based drugs) in pH changes of the DV.
Carbon from jatropha seed hull (JC) was prepared to study the adsorption of cadmium ions (Cd(2+)) from aqueous solutions under various experimental conditions. Batch equilibrium methods have been used to study the influences of the initial metal ion concentration (0.5-50 ppm), dosage (0.2-1 g), contact time (0-300 min), pH (2-7), and temperature (26-60 °C) on adsorption behavior. It has been found that the amount of cadmium adsorbed increases with the initial metal ion concentration, temperature, pH, contact time, and amount of adsorbent. A kinetic study proved that the mechanism of Cd(2+) adsorption on JC followed a three steps process, confirmed by an intraparticle diffusion model: rapid adsorption of metal ions, a transition phase, and nearly flat plateau section. The experimental results also showed that the Cd(2+) adsorption process followed pseudo-second-order kinetics. The Langmuir and Freundlich adsorption isotherm models were used to describe the experimental data, with the former exhibiting a better correlation coefficient than the latter (R² = 0.999). The monolayer adsorption capacity of JC has been compared with the capacities of the other reported agriculturally-based adsorbents. It has been clearly demonstrated that this agricultural waste generated by the biofuel industry can be considered a potential low-cost adsorbent for the removal of Cd(2+) from industrial effluents.
This research investigated the removal of lead (Pb(2+)) by a novel biochar derived from palm oil sludge (POS-char) by slow pyrolysis. Multistage optimizations with central composite design were carried out to firstly optimize pyrolysis parameters to produce the best POS-char for Pb(2+) removal and secondly to optimize adsorption conditions for the highest removal of Pb(2+). The optimum pyrolysis parameters were nitrogen flowrateof30mLmin(-1), heating rateof10°Cmin(-1), temperatureof500°C and timeof30min. The optimum Pb(2+) adsorption conditions were concentrationof200mgL(-1), timeof60min, dosageof0.3g and pH of 3.02. The various functional groups within POS-char played a vital role in Pb(2+) uptake. Regeneration was demonstrated to be feasible using hydrochloric acid. Adsorption equilibrium was best described by Freundlich model. At low concentration range, adsorption kinetic obeyed pseudo-first-order model, but at high concentration range, it followed pseudo-second-order model. Overall, the results highlighted that POS-char is an effective adsorbent for Pb(2+) removal.