The distribution patterns of tropical ectomycorrhizal (ECM) fungi along altitudinal gradients remain largely unknown. Furthermore, despite being an iconic site for biodiversity research, virtually nothing is known about the diversity and spatial patterns of fungi on Mt Kinabalu and neighbouring mountain ranges. We carried out deep DNA sequencing of soil samples collected between 425 and 4000 m above sea level to compare richness and community composition of ECM fungi among altitudinal forest types in Borneo. In addition, we tested whether the observed patterns are driven by habitat or by geometric effect of overlapping ranges of species (mid-domain effect). Community composition of ECM fungi was strongly correlated with elevation. In most genera, richness peaked in the mid-elevation montane forest zone, with the exception of tomentelloid fungi, which showed monotonal decrease in richness with increasing altitude. Richness in lower-mid- and mid-elevations was significantly greater than predicted under the mid-domain effect model. We provide the first insight into the composition of ECM fungal communities and their strong altitudinal turnover in Borneo. The high richness and restricted distribution of many ECM fungi in the montane forests suggest that mid-elevation peak richness is primarily driven by environmental characteristics of this habitat and not by the mid-domain effect.
Warm compaction is an advanced manufacturing technique which consists of two consecutive steps, i.e. powder compaction at above ambient temperature and sintering in a controlled environment. Due to the relative movement between the powder mass and die wall as well as sliding among powder particles, frictional force is generated during the compaction stage. Admixed lubricant is used during the compaction step in order to minimize friction and hence improve the uniformity of the density of distribution inside the component. However, during the sintering process, trapped lubricant is often found to be burnt out hence leaving pores or voids which result in the lower strength of the final products. Warm compaction was initiated in the nineties, however not much information has been published about the effects of lubrication on the quality of the components produced through this route. Therefore, this paper presents the outcome of an experimental investigation about the effects of lubrication on manufacturing near-net shape components through the warm compaction route. Iron powder ASC 100.29 was mixed mechanically with zinc stearate to prepare the feedstock. Mixing time, weight percentage of lubricant content and compaction temperature were varied during green compact generation while sintering temperature, heating rate and holding time were manipulated during sintering. The relative densities and strengths of the final products were investigated at every compaction as well as sintering parameter. The results revealed that lubrication could provide significant effects at the compaction temperature of 180ºC while no significant effect of lubrication was observed during sintering. The suitable lubricant content was found to be 0.4 wt% and mixing time was around 30 min and the sintering temperature was around 990ºC.
Tailing sand is the residue mineral from tin extraction that contains between 94% and 99.5% silica, which can be used as moulding sand. It is found in abundance in the Kinta Valley in the state of Perak, Malaysia. Adequate water content and clay in moulding sand are important factors for better strength and
casting quality of products made from tailing sand. Samples of tailing sand were investigated according
to the American Foundrymen Society (AFS) standard. Cylindrical test pieces of Ø50 mm×50 mm in height from various sand-water ratios were compacted by applying three ramming blows of 6666g each using a Ridsdale-Dietert metric standard rammer. The specimens were tested for green compression strength using a Ridsdale-Dietert universal sand strength machine. Before the tests were conducted, moisture content of the tailing sand was measured using a moisture analyser. A mixture bonded with 8% clay possesses higher green compression strength compared to samples bonded with 4% clay. The results also show that in order to achieve maximum green compression strength, the optimum allowable moisture content for mixtures bonded with 8% clay is ranged between 3.75 and 6.5% and for mixtures bonded with 4% clay is 3-5.5%.
Vapour pressure deficit (VPD) analysis introduces an approach to develop a better basis for the control of the environment of lowland greenhouses in Malaysia. The study of vapour pressure deficit (VPD) is to show air moisture conditions for plant production while taking into account different temperature levels. The purpose of this project is to develop a real-time automatic temperature and relative humidity control system in the lowland tropical greenhouse using a PIC16f876A microcontroller. The controller will then be used to monitor the temperature, relative humidity and VPD in the planting of Chili Kulai (Titisan 15). The fertigation system was introduced to the greenhouse to fertilize and irrigate the plant as well as to provide moisture to the environment. A swamp cooler was used to bring down the temperature and increase moisture content in the greenhouse. Ventilators were installed to remove the heat in the greenhouse. The study was carried out in an experimental greenhouse located at the Institute of Advanced Technology, Universiti Putra Malaysia (UPM).
Linear density polyethylene (LDPE)/thermoplastic sago starch (TPSS), blended with and without the addition of compatibilizer [Polyethylene-grafted-Maleic Anhydride, (PE-g-MA)] were prepared for soil burial test. The test was conducted in the natural soil environment for 3 and 6 months. Different loading of TPSS (10, 20, 30, 40, and 50 wt. %) were used in this study. After soil burial, the blends were evaluated for their tensile properties and scanning electron microscopy (SEM) to observe the surface morphology properties after the test. For LDPE/TPSS, it was observed that the tensile strength decreased with the increase of soil burial time, as well as Young modulus and elongation at break (EB). The LDPE/TPSS/PE-g-MA also showed the same trend for the tensile properties, but with higher properties as compared to uncompatibilized blends. The tensile properties also decreased with the increase in the TPSS loading for both the LDPE/TPSS and LDPE/TPSS/PE-g-MA. Meanwhile,
the scanning electron microscopy (SEM) on the blend surfaces after the soil burial test showed that degradability increased with the increase in the exposure time as well as the TPSS loading.
The combined metabolic and thermoregulatory demands experienced during exercise in the heat impose an exceptional stress on the circulatory system. To date, much of what is known about circulatory stress during exercise in the heat has focused on primarily dry environment (~ 40% rh)
with limited studies carried in higher humidity (> 60% rh) conditions. This study was designed to investigate the influence of humid condition on circulatory responses during prolonged intense running exercise among elite runners. On separate days, 11 male elite runners ran for 60 minutes at
an intensity of 70% max across three different humidity levels of HH (71% rh), NH (43% rh) and LH (26.2% rh) with the ambient temperature set at 300C. Thermal stress was found to increase during exercise in the HH condition as both Tre and Tsk steadily rise across time. Circulatory stress markedly increased during exercise in higher humidity levels. Heart rate was significantly higher in the HH condition with its level increasing to 92% of HRmax. The upwards drift in HR was significantly higher in HH within the last ten minutes of exercise. Contrary, stroke volume recorded a
steady decline during exercise with a significantly lower SV in the HH as compared with the NH and LH. Results implicate rising humidity level will impose greater circulatory stress during prolonged intense exercise. The consequence from this circulatory stress will result in limited ability for an athlete to sustain his exercise capacity when HR reaches maximal level.
Among the challenges for superconducting devices to be applied in industry are the need for high transport critical current density (Jr) and sustainability of the device in different environment. For superconducting material to maintain high 4, effective flux pinning centers are needed. The addition of small size MgO particles in bulk Bi2Sr2CaCu2O8 (Bi-2212) superconductor has been proven to enhance the effective flux pinning centers in the superconducting material. Nevertheless, the flux pinning properties of the superconducting materials may change if they are exposed to radioactive environment. Electron irradiation is one of the common techniques that can be used to study the impact of irradiation on superconducting materials. In this work, a small amount of nanosize MgO particles were used as the flux pinning centers for Bi-2212 superconducting material. The Bi-2212/MgO composite was heat treated and followed by partial melting and slow cooling. Some of the samples were subjected to electron irradiation using the facility at the Malaysian Nuclear Agency. Characterizations of non-irradiated and irradiated samples were performed via X-ray Diffraction Patterns (XRD), Scanning Electron Microscopy (SEM) and measurements of J, dependence on temperature in self-field. Higher J, indicates better flux pinning properties in irradiated superconductor composite. This is achieved if defects with larger radius with dimension comparable to the coherence length of the superconducting material were created. On the other hand, decreased in Je indicates ineffective flux pinning and this is attributed to the overlapping of defects that break the superconducting region. Our study showed that electron irradiation deteriorated the flux pinning properties of the Bi-2212/MgO superconductor composite.
A study on the distribution of Recent Ostracoda in offshore sediment was carried out around the South China Sea. A total of 30 sediment samples were taken from the sampling stations between latitude 1°48’ and 7°25’N and longitude 102°09’ and 105°16’E. From this study, 79 species of ostracods belonging to 16 families and 44 genera were identified. The dominant species was Foveoleberis cypraeoides with 937 individuals obtained. There were 13 to 43 species in total. Diversity Index, H(s), was in the range of 2.1 to 3.3, whereas the dominance values were between 4.4 and 14.7%. Several environmental parameters were measured including depth, temperature and salinity. The range values for each of these parameters are 13-72 m, 25.24-30.06o C and 27.74-34.91 ppt, respectively. The sediment texture in this study area can be categorized as sand, sandy mud, clayey mud, silty mud, silty clay, clayey sand, clayey silt and silty sand. The observations revealed that abundance and diversity of ostracod appeared to be principally controlled by depth. Two faunal assemblages were identified in terms of faunal composition, namely, shallow water (Hemikrithe orientalis, Neomonoceratina iniqua, Stigmatocythere indica, Cytherelloidea leroyi and Neocytheretta snellii) and deep water (Paracypris sp., Alataconcha pterogona, Bythocytheropteron alatum, Keijella paucipunctata and Actinocythereis scutigera). A comparative analysis showed a high degree resemblance between the study area and south-eastern Malay Peninsula (the South China Sea).
Geographic Information System (GIS) and remote sensing are geospatial technologies that have been used for many years in environmental studies, including gathering and analysing of information on the physical parameters of wildlife habitats and modelling of habitat assessments. The home range estimation provided in a GIS environment offers a viable method of quantifying habitat use and facilitating a better understanding of species and habitat relationships. This study used remote sensing, GIS and Analytic Hierarchy Process (AHP) application tools as methods to assess the habitat parameters preference of Asian elephant. Satellite images and topographical maps were used for the environmental and topographical habitat parameter generation encompassing land use-land cover (LULC), Normalized Digital Vegetation Index (NDVI), water sources, Digital Elevation Model (DEM), slope and aspect. The kernel home range was determined using elephant distribution data from satellite tracking, which were then analysed using habitat parameters to investigate any possible relationship. Subsequently, the frequency of the utilization distribution of elephants was further analysed using spatial and geostatistical analyses. This was followed by the use of AHP for identifying habitat preference, selection of significant habitat parameters and classification of criterion. The habitats occupied by the elephants showed that the conservation of these animals would require good management practices within and outside of protected areas so as to ensure the level of suitability of the habitat, particularly in translocation areas.
Obesity is a main public health problem predisposes many to the obesity-related health problems worldwide. Malaysia was ranked as sixth in Asia with high prevalence of obesity by the World Health Organisation in 2010. It is multifactorial origin and depends on many internal and external interactions; between human beings and the environment. In this review article, the focus will be on the example of chemical obesogens that present silently in the daily diet, pharmaceutical or industrial compounds that predispose people to obesity through altering and disrupting normal bodily metabolic processes
The Healthy City concept was taken by Malaysia in 1994 and Malacca State has initiated this project in late 1997 and launched in September 1998. The aim of the project is to had ways of achieving a better quality of urban life. The objective of this study was to assess the views and responses of Melaka Tengah community with regards to the existing facilities and services rendered in the district. The views will be incorporated into ideas for the policymakers and planners to develop Malacca into a healthy city. Three methods were used to collect the data. Questionnaires were given to the community of Melaka Tengah District. The respondents were selected by multistage sampling, Observation was carried out at selected public places to assess the community's practices and contribution, Ten focus group discussion were conducted consisting of health staff and public to discuss on environmental, social, physical and economic issues of Malacca. There were 3 sectors that had mean scores above 3.0 (the cut off level for being satisfed). They were health, housing and environment, ln terms of dissatisfaction, there were 4 sectors scoring below 3.0, These include domestic waste dnposal, road system, public transportation and recreational park. The community
expected the services to be improved especially in terms of cleanliness, They agreed to contribute in their own ways in developing the sectors discussed except for public transportation, wet market and food premises which were beyond their control. Observation showed that some of the community members exhibit bad behaviours that can contribute to an unhealthy city. The Melaka
Tengah community expected ejficient and quality services and they agreed to contribute in making Malacca into a Healthy City.
This study investigated the thermal properties of three room temperature curing adhesives containing nano particles which were thixotropic and shear thinning which allowed injection into overhead holes when exposed to different environmental conditions. Viscosity and shear stress of the adhesives were measured as a function of shear rate. The thermal behaviour of the adhesives were measured using dynamic mechanical thermal anylisis following exposures to different temperatures and humidities which included temperatures of 20 degrees Celcius, 30 degrees Celcius and 50 degrees Celcius, relative humidities of 65% RH, 75% RH 95% RH soaked in water at 20 degrees Celcius and placed in the oven at 50 degrees Celcius. The dynamic thermal properties reported include storage and loss modulus, the loss tangent and the glass transition temperature ( Tg ). For nano- and micro-particles filled adhesives, the Tg increased with the temperature increase, even though the adhesives was subjected to high humidity and this was due to further cross-linking. The results showed that room temperature cured epoxies were only partially cured at room temperature.
Malaysia has good environmental laws to protect the outdoor environment and public health. However there are no laws governing indoor air quality (IAQ) and the knowledge among the public about its importance is also lacking. Environmental professionals think it is not a priority and this influences the policy decisions in the country. Therefore there is a need to create awareness by way of research, education and other promotional activities. What is much needed at this time is the establishment of standards for the conduct of risk assessment studies. To establish standards we need reliable data which can be used to develop appropriate guidelines for the purpose of mitigation and adaptation programmes. IAQ can have significant influence on health resulting in drop in productivity and economy of a country. It has been estimated that in the US, building related illnesses (BRI) symptoms have a relationship with decrease (3 to 5%) in work performance in an affected population resulting in an annual loss of US$60 billion in revenue. However, based on efficient management programmes they have also projected that the potential annual savings can be in the region of US$10 to 30 billion. This establishes that fact that good management programmes based on efficient guidelines is of economic value to a country and wellbeing of the population. The IMU has embarked on a research programme to collect the much-needed data for the framing of a good IAQ guideline for Malaysia.
The transformation of systematic vacuum and hydrogen annealing effects in graphene devices on the SiO2 surface is reported based on experimental and van der Waals interaction corrected density functional theory (DFT) simulation results. Vacuum annealing removes p-type dopants and reduces charged impurity scattering in graphene. Moreover, it induces n-type doping into graphene, leading to the improvement of the electron mobility and conductivity in the electron transport regime, which are reversed by exposing to atmospheric environment. On the other hand, annealing in hydrogen/argon gas results in smaller n-type doping along with a decrease in the overall conductivity and carrier mobility. This degradation of the conductivity is irreversible even the graphene devices are exposed to ambience. This was clarified by DFT simulations: initially, silicon dangling bonds were partially terminated by hydrogen, subsequently, the remaining dangling bonds became active and the distance between the graphene and SiO2 surface decreased. Moreover, both annealing methods affect the graphene channel including the vicinity of the metal contacts, which plays an important role in asymmetric carrier transport.
The aim of this paper is to review the potentialities and major methodological challenges
of integrating remote sensing (RS) and geographic information system (GIS) with socioeconomic data
from published articles or book chapters. RS and GIS combined with social science (SS)(termed as
geoinformation technology) serve many applications for sustainable management and monitoring of
the environment. This combined approach gives more accurate results than the single one. It makes
information available about the trend and pattern of land use and land cover change (LUCC) with
socioeconomic variables like population, demographic or income. This combined study which links
RS and GIS with socioeconomic data can also be used successfully for monitoring transmission rate
of disease and mapping or preparing vulnerability index. For impact assessment and modelling, this
combined technology provides better results than the single one. There are some methodological
problems for the researchers to link completely two different disciplines as the object of study and
observational unit is completely different. However, this interdisciplinary study is gaining popularity
day by day to researchers from different disciplines as well as decision makers.
Middle-income countries are currently undergoing massive structural changes towards more industrialized economies. In this paper, we carefully examine the impact of these transformations on the environmental quality of middle-income countries. Specifically, we examine the role of sector value addition to GDP on CO2 emission nexus for middle-income economies controlling for the effects of population growth, energy use, and trade openness. Using recently developed panel methods that consider cross-sectional dependence and allow for heterogeneous slope coefficients, we show that energy use and growth of industrial and service sectors positively explain CO2 emissions in middle-income economies. We also find that population growth is insignificantly associated with CO2 emission. Hence, our paper provides a solid ground for developing a sustainable and pro-growth policy for middle-income countries.
Vibrio parahaemolyticus is well known to be abundantly distributed in marine, coastal and
estuarine environments. Since 1951, V. parahaemolyticus had been the source of numerous
outbreaks related to contaminated or mishandled seafood. However, V. parahaemolyticus
had been detected on other types of food. This issue has prompted this study to investigate
on the prevalence of V. parahaemolyticus in various food samples and determine the risk
associated with it. The results of the MPN-plating technique of the study indicated that V.
parahaemolyticus was detected in seafood (33.3%, 95% Confidence Interval [CI] 31.9 – 34.8 ,
94 – 290 MPN/g) and vegetables (10.0%, 95% CI 9.7 – 10.3 , 9.2 – 23 MPN/g) while negative
V. parahaemolyticus was detected in fruits (0.0%, 95% CI 0 – 1,
This research aims to assess the sustainability of the most common earth-retaining walls (Gravity Walls and Cantilever Walls) in terms of environmental impacts, economic issues, and their combination. Gravity walls observed in this study consist of Gabion Wall, Crib Wall, and Rubble Masonry Wall, while Cantilever Walls include Reinforced Concrete Wall. Six different criteria were taken into account, including global warming potential, fossil depletion potential, eutrophication potential, acidification potential, human toxicity potential, and cost. To achieve the aim of this study, life cycle assessments, life cycle costs, and multi-criteria decision-making methods were implemented. The results showed that the most environmental-friendly option among all alternatives was the Gabion Wall, followed by the Rubble Masonry Wall. However, in terms of economic aspects, the Cantilever Concrete Wall was the best option, costing about 17% less than the Gabion Wall. On the other hand, the results of multi-criteria decision-making showed that the Gabion Wall was the most sustainable choice. This study addressed the research gap by carrying out a sustainability assessment of different retaining walls while considering cost and environmental impacts at the same time.
As an abundant and fast-growing biomass, bamboo can be used as construction materials owing to its desirable physical and mechanical properties, environmentally friendly features, and alternative to replace toxic and hazardous wastes in industrial processing. In this study, grid material made from bamboo (termed 'bamboo grid') was developed and compared to commercially used polyvinyl chloride (PVC) as packing material in cooling towers; PVC packing has drawbacks such as fouling, deposit buildup, low durability, and is harmful to environments. The cooling capacity, energy efficiency and environmental impact of bamboo grid packing were evaluated via life cycle assessment (LCA), particularly the cumulative energy demand (CED) and the Building for Environmental and Economic Sustainability (BEES). Although the thermal performance of the PVC packing was found higher than that of the bamboo grid packing, the bamboo grid packing showed improved resistance characteristic, recording a total saving of 529.2 tons of standard coal during a six-month field test in a real thermal power generation plant. LCA results revealed that the utilization of bamboo-grid packing to replace PVC packing in cooling towers reduced total CED from 3420 MJ to 561 MJ per functional unit, achieving 6 times reduction. A desirable reduction ranging from 1.5 to 10.5 times was also recorded for the BEES indices. This LCA comparison analysis confirmed the improvement of energy efficiency and reduction of environmental impact by using the bamboo grid to replace PVC as packing material in cooling towers. The major environmental impact (BEES) indices (e.g., the total Global warming potential, Acidification, Eutrophication and Smog) were reduced by 1.5-10.5 times via the use of bamboo grid. The results demonstrate that bamboo grid packing is a good alternative to replace existing grid packing materials such as concrete and PVC that are harmful to human health and environments.
Chikungunya virus infection had not been reported by the National Secretary of Health of the State of Baja California Sur, Mexico before 2015, and until now, no information of the disease has been published. Thus, the objective of this study was to assess the tendency that the disease has shown since its introduction. The total number of cases in the state was analyzed, and the incidence rate of infection was evaluated in the general population, age groups, and gender. From 2015-2019, the year with the highest number of reported cases was 2016 with 210 cases, but no cases were reported from 2018-2019. The gender with the highest number of cases was female. The most affected age group was adults 45-64 years of age.