Industrial effluents contain several organic and inorganic contaminants. Among others, dyes and heavy metals introduce a serious threat to drinking waterbodies. These pollutants can be noxious or carcinogenic in nature, and harmful to humans and different aquatic species. Therefore, it is of high importance to remove heavy metals and dyes to reduce their environmental toxicity. This has led to an extensive research for the development of novel materials and techniques for the removal of heavy metals and dyes. One route to the removal of these pollutants is the utilization of magnetic carbon nanotubes (CNT) as adsorbents. Magnetic carbon nanotubes hold remarkable properties such as surface-volume ratio, higher surface area, convenient separation methods, etc. The suitable characteristics of magnetic carbon nanotubes have led them to an extensive search for their utilization in water purification. Along with magnetic carbon nanotubes, the buckypaper (BP) membranes are also favorable due to their unique strength, high porosity, and adsorption capability. However, BP membranes are mostly used for salt removal from the aqueous phase and limited literature shows their applications for removal of heavy metals and dyes. This study focuses on the existence of heavy metal ions and dyes in the aquatic environment, and methods for their removal. Various fabrication approaches for the development of magnetic-CNTs and CNT-based BP membranes are also discussed. With the remarkable separation performance and ultra-high-water flux, magnetic-CNTs, and CNT-based BP membranes have a great potential to be the leading technologies for water treatment in future.
Introduction: Heavy metals and other contaminants in food have been a concern to food industries, consumers and governing authorities. The purpose of this study was to determine the levels of heavy metals and other elements in edible bird nests (EBNs). Methods: Raw and processed (commercial) EBNs were used in the study. Raw EBNs were collected directly from five house farms in Peninsular Malaysia - Kuala Sanglang (Kedah), Pantai Remis (Perak), Kluang Gohor), Kota Bharu (Kelantan) and Kajang (Selangor). Processed EBNs were pmchased from five Chinese traditional medicinal shops located in Peninsular Malaysia. The levels of 32 elements were determined by inductively coupled plasma-mass spectrometry and findings of the study were compared to the maximum regulatory limits set by the Standards and Industrial Research Institute of Malaysia (SIRIM) for EBNs. Results: Of the seven elements with maximum regulatory limits (As, Cd, Pb, Hg, Sn, Cu, Fe), one raw EBN was detected with mercury level of 70.180 ppb which was above the SIRIM permissible limit of 50 ppb. All the EBNs had iron levels above the SIRIM permissible limit of 30 ppb. The levels of the other 25 elements with no maximum regulatory limits (Ca, Mg, Na, K, P, Co, Cr, Mn, Mo, Se, Zn, Ag, Ba, Be, Bi, B, Li, Ni, Sb, Sr, Ti, U, V, Al, Zr) were also determined. Conclusion: The data obtained for the 25 elements with no permissible limits can serve as baseline data for further studies to establish their maximum regulatory limits.
This study aimed to assess the concentrations of cadmium (Cd), nickel (Ni) and lead (Pb) in the tissues of fish collected from the lower reach of the Kelantan River, Malaysia. Fishes were collected using gill nets during the dry and wet seasons. A total of 78 individual fish were caught and comprised 6 families, 11 genera and 13 species. The dorsal muscle was analysed using a graphite furnace Atomic Absorption Spectrometer (AAS). The mean concentration of Cd in Chitala chitala (0.076 mg/kg) was above the critical limit values of the European Commission (EC), World Health Organization (WHO) and Food and Agriculture Organization (FAO). The mean concentrations of Cd in Barbonymus gonionatus and Tachysurus maculatus were already at the level of concern, whereas the other species were approaching the limits of permissible levels. No fish samples were found to have a Ni level higher than the permissible limit of 0.5-0.6 mg/kg set by the WHO (1985). Osteochilus hasseltii (0.169 mg/kg) and T. maculatus (0.156 mg/kg) showed high Pb concentrations. The concentrations of heavy metals were found to be elevated in the wet season (p<0.05). Omnivorous fish were detected with elevated concentrations of Cd and Ni, whereas carnivorous fish had the highest concentration of Pb. The concentrations of Cd and Pb in fish tissues were positively correlated with fish weight (p<0.05). This study determined that the fish species caught in the Kelantan River were contaminated with non-essential metals (Cd, Ni and Pb). Nevertheless, the heavy metal concentration in the fish tissues, with the exception of C. chitala, O. hasseltii and T. maculatus, did not exceed the EC, FAO, Malaysian Food Act (MFA) or WHO guidelines.
In this study, chitosan/polyvinyl alcohol (PVA)/zeolite nanofibrous composite membrane was fabricated via electrospinning. First, crude chitosan was hydrolyzed with NaOH for 24h. Afterward, hydrolyzed chitosan solution was blended with aqueous PVA solution in different weight ratios. Morphological analysis of chitosan/PVA electrospun nanofiber showed a defect-free nanofiber material with 50:50 weight ratio of chitosan/PVA. Subsequently, 1wt.% of zeolite was added to this blended solution of 50:50 chitosan/PVA. The resulting nanofiber was characterized with field emission scanning electron microscopy, X-Ray diffraction, Fourier transform infrared spectroscopy, swelling test, and adsorption test. Fine, bead-free nanofiber with homogeneous nanofiber was electrospun. The resulting membrane was stable in distilled water, acidic, and basic media in 20 days. Moreover, the adsorption ability of nanofibrous membrane was studied over Cr (VI), Fe (III), and Ni (II) ions using Langmuir isotherm. Kinetic parameters were estimated using the Lagergren first-order, pseudo-second-order, and intraparticle diffusion kinetic models. Kinetic study showed that adsorption rate was high. However, the resulting nanofiber membrane showed less adsorption capacity at high concentration. The adsorption capacity of nanofiber was unaltered after five recycling runs, which indicated the reusability of chitosan/PVA/zeolite nanofibrous membrane. Therefore, chitosan/PVA/zeolite nanofiber can be a useful material for water treatment at moderate concentration of heavy metals.
Fly ash is the finely divided mineral residue resulting from the combustion of coal in electric generating plants. Fly ash consists of inorganic, incombustible matter present in the coal that has been fused during combustion into a glassy, amorphous structure. Fly ash particles are generally spherical in shape and range in size from 2 μm to 10 μm. They consist mostly of silicon dioxide (SiO2), aluminium oxide (Al2O3) and iron oxide (Fe2O3). Fly ash like soil contains trace concentrations of the following heavy metals: nickel, vanadium, cadmium, barium, chromium, copper, molybdenum, zinc and lead. The chemical compositions of the sample have been examined and the fly ash are of ASTM C618 Class F.
Unripe and ripe kundang fruits (Bouea macrophylla Griffith) is either consumed fresh or is cooked in Malaysia. In this study composition of unripe and ripe fruits (proximate, amino acids profile, minerals and heavy metal contents) were evaluated. Results obtained showed unripe kundang fruit to possess higher moisture, ash, crude lipid, crude fiber and crude protein contents than the ripe fruits. With regard to amino acid contents, unripe fruits had higher content of essential amino acids. The unripe and ripe fruits were found to be rich in essential minerals with potassium (K) to be in abundance. Heavy metals such as cadmium, nickel, mercury, lead and arsenic, were detected in trace amounts (< 5.0 mg/kg) in both unripe and ripe fruits. Through this investigation, it is concluded that both unripe and ripe fruits to posses’ adequate amount of nutritionally important compounds beneficial to human health and can be explored for commercial purposes.
Tiger’s Milk mushroom has been used for medicinal purposes by local aborigines to treat asthma, breast cancer, cough, fever and food poisoning. Molecular phylogenetic analysis utilizing RNA polymerase II, second largest subunit (RPB2) gene, identified the wild Tiger’s Milk mushrooms collected from the state of Pahang in Malaysia for this study as Lignosus rhinocerus in the order Polyporales. The tuber, stipe and pileus of this mushroom were analyzed for their basic nutritional composition (fat, protein, and carbohydrate) and toxic metal content profile (Cadmium, Lead and Mercury). The moisture content of these mushroom parts varied from 32.22% (pileus) – 46.31% (stipe). The dry matter of the mushrooms contained 2.76% (stipe) – 6.60% (pileus) proteins, 0.21% (pileus) – 0.30% (tuber) fat, 1.76% (stipe) – 4.38% (tuber) ash and 38.47% (stipe) – 56.30% (pileus) carbohydrates. The toxic metal content of the mushroom samples ranged from 0.03–0.12 mg/kg for Cd, 0.80–1.94 mg/kg for Pb and 0.05–0.10 mg/kg for Hg. The present study demonstrated that L. rhinocerus is a potential source of food due to its high carbohydrate content. In addition, the trace levels of toxic metals in this mushroom are within the safe level for consumption.
To assess stress level induced by multiple stressors in aquatic organism, biomarkers have been adopted as early warning indicator due to their high accuracy, rapidity, and sensitivity. We investigated the effects of ectoparasitic isopod infection on heavy metal bioaccumulation (Fe, Cu, Zn, and Cd) in the fish Nemipterus furcosus and profiled the expression of metallothionein (MT) and heat shock proteins 70 (HSP70) genes of the fish host. Sixty individuals (parasitized and nonparasitized with Cymothoa truncata) were collected from three sites differing in the levels of anthropogenic activities off the South China Sea. Our results revealed no significant difference in heavy metal concentrations between infected and nonparasitized fish. We observed a positive correlation between heavy metal bioaccumulation in the fish host and anthropogenic activities. Accordingly, expression analysis of MT genes in fish liver showed significant differences in expression level between sampling sites, with lowest level in the least exploited site (Batu Rakit). A reverse pattern in HSP70 gene expression was demonstrated in fish muscle, showing the highest expression at Batu Rakit. While cymothoid infection in N. furcosus had no significant impact on fish MT gene expression, it resulted in a reduction of HSP70 level in liver of parasitized fish. These findings highlight the putative roles of MT in heavy metal assessment. Future studies should determine the kinetics of cymothoid infection and other potential stressors in characterizing the HSP70 gene expression profile.
Lead, a chemical element in the carbon group with symbol Pb (from Latin: Plumbum, meaning "the liquid silver") and has an atomic number 82 in the periodic table. It was the first element that was characterized by its kind of toxicity. In animal systems, lead (Pb) has been incriminated in a wide spectrum of toxic effects and it is considered one of the persistent ubiquitous heavy metals. Being exposed to this metal could lead to the change of testicular functions in human beings as well as in the wildlife. The lead poising is a real threat to the public health, especially in the developing countries. Accordingly, great efforts on the part of the occupational and public health have been taken to curb the dangers of this metal. Hematopoietic, renal, reproductive, and central nervous system are among the parts of the human body and systems that are vulnerable toward the dangers following exposure to high level of Pb. In this review, we discussed the massive harmful impact that leads acetate toxicity has on the animals and the worrying fact that this harmful toxicant can be found quite easily in the environment and abundance. Highlighting its (Pb) effects on various organs in the biological systems, its economic, as well as scientific importance, with the view to educate the public/professionals who work in this area. In this study, we focus on the current studies and research related to lead toxicity in animals and also to a certain extent toward human as well.
The status ofhve l1eavy metals: cadmium, lead copper, zinc and mercury were determined in seafood and its products imported_ti·om Thailand via Bukit Kayu Hiram, Kedah, Flame Atomic Absorption Spectrophotometer was used to determine the level of these heary metals except for mercury, where the cold vapor technique was used, Randomized sampling was done according to a predetermined sampling plan based on the previous years consignments. Data collected were compared with the maximum permitted level of -metal contaminants in fish and fish products- ofthe Fourteenth Schedule (Regulation 38) of Food Act I983 and Food Regulations I 985 to ascertain compliance. lt was noted form this study, that the level of metals detected in seafood and its products had a very wide range, The levels detected for cadmium was at a range of 0. 00] - 3.9/2, 0.07 — 0.29, 0,04 - 4,4 mg/kg in fish, shellfish and cuttlefish respectivelv. In general, cadmium level in some samples was notably higher particularly in shellfish. All samples had lead level less than the permitted value except for fish where the highest value detected was 3.28 mg/kg. The level of copper and zinc was higher than the permitted value in octopus, prawn and crab, Mercury level in all samples analvzed was found to be below the detection level. As for fish samples, zinc level was found to be higher whereas copper was within the limit. However, it was also noted that the level of all the heavy metals in jiozen jish was within the permitted limit.
Microalgae are important biological resources that have a wide range of biotechnological
applications. Due to their high nutritional value, microalgae such as Spirulina and Chlorella are being mass cultured for health food. A variety of high-value products including polyunsaturated fatty acids (PUFA), pigments such as carotenoids and phycobiliproteins, and bioactive compounds are useful as nutraceuticals and pharmaceuticals, as well as for industrial applications. In terms of environmental biotechnology, microalgae are useful for bioremediation of agro-industrial wastewater, and as a biological tool for assessment and monitoring of environmental toxicants such as heavy metals, pesticides and pharmaceuticals. In recent years, microalgae have attracted much interest due to their potential use as feedstock for biodiesel production. In Malaysia, there has been active research on microalgal biotechnology for the past 30 years, tapping into the potential of our
rich microalgal resources for high-value products and applications in wastewater treatment and assessment of environmental toxicants. A culture collection of microalgae has been established, and this serves as an important resource for microalgal biotechnology
research. Microalgal biotechnology should continue to be regarded as a priority area of research in this country.
Filamentous fungi such as Fusarium equiseti KR706303 and Penicillium citrinum KR706304
are capable of sequestering heavy metals from aqueous solutions. In the present study, the role
play by various functional groups present in the cell wall of F. equiseti KR706303 and P.
citrinum KR706304 during lead and copper ions biosorption was investigated. The fungal
biomass was chemically treated to modify the functional groups present in their cell wall. These
modifications were studied through biosorption experiments. It was found that an esterification
of the carboxyl and phosphate groups, methylation of the amine groups and extraction of lipids
significantly decrease the biosorption of both lead and copper ions studied. Therefore, the
carbonyl, hydroxyl and amide groups were recognized as important in the biosorption of metal
ions by the tested fungi. The study showed that there was no release of any metal ions from the
biomass after biosorption, indicating that ion exchange may not be a key mechanism in the
biosorption of lead and copper ions by these fungi but complexation of metal ions within the
fungal cell wall.
Bacterial based remediation of environmental toxicants is a promising innovative technology
for molybdenum pollution. To date, the enzyme responsible for molybdate reduction to Moblue
from bacteria show that the Michaelis-Menten constants varies by one order of magnitude.
It is important that the constants from newer enzyme sources be characterized so that a
comparison can be made. The aim of this study is to characterize kinetically the enzyme from a
previously isolated Mo-reducing bacterium; Bacillus pumilus strain Lbna. The maximum
activity of this enzyme occurred at pH 5.5 and in between 25 and 35 oC. The Km and Vmax of
NADH were 6.646 mM and 0.057 unit/mg enzyme, while the Km and Vmax of LPPM were 3.399
mM and 0.106 unit/mg enzyme. The results showed that the enzyme activity for Bacillus
pumilus strain Lbna were inhibited by all heavy metals used. Zinc, copper, silver, chromium,
cadmium and mercury all caused more than 50% inhibition to the Mo-reducing enzyme activity
with copper being the most potent with an almost complete inhibition of enzyme activity
observed.
The presence of both heavy metals and organic xenobiotic pollutants in a contaminated site
justifies the application of either a multitude of microbial degraders or microorganisms having
the capacity to detoxify a number of pollutants at the same time. Molybdenum is an essential
heavy metal that is toxic to ruminants at a high level. Ruminants such as cow and goats
experience severe hypocuprosis leading to scouring and death at a concentration as low as
several parts per million. In this study, a molybdenum-reducing bacterium with amide-degrading
capacity has been isolated from contaminated soils. The bacterium, using glucose as the best
electron donor reduces molybdenum in the form of sodium molybdate to molybdenum blue. The
maximal pH reduction occurs between 6.0 and 6.3, and the bacterium showed an excellent
reduction in temperatures between 25 and 40 oC. The reduction was maximal at molybdate
concentrations of between 15 and 25 mM. Molybdenum reduction incidentally was inhibited by
several toxic heavy metals. Other carbon sources including toxic xenobiotics such as amides
were screened for their ability to support molybdate reduction. Of all the amides, only
acrylamide can support molybdenum reduction. The other amides; such as acetamide and
propionamide can support growth. Analysis using phylogenetic analysis resulted in a tentative
identification of the bacterium as Pseudomonas sp. strain 135. This bacterium is essential in
remediating sites contaminated with molybdenum, especially in agricultural soil co-contaminated
with acrylamide, a known soil stabilizer.
The development of new adsorbent has rapidly increased in order to overcome the problem
of waste water treatment from heavy metal pollution. The ability of nickel (II)-ion imprinted
polymer (Ni-IIP) as an alternative adsorbent for the removal of nickel ion from aqueous has
been investigated. The Ni-IIP was prepared via bulk polymerization by using functional
monomers; methylacrylic acid (MAA) with picolinic acid as a co-monomer. Nickel ion was
used as template, AIBN as initiator and EGDMA as cross-linking agent. Non-imprinted control
polymer (NIP) was prepared in the same manner as Ni-IIP but in the absence of nickel
ion. The resultant of Ni-IIP and NIP were characterized by using Fourier Transform Infrared
(FTIR) spectroscopy and Scanning Electron Microscope (SEM). Result showed that, the adsorption
of nickel ion onto Ni-IIP increased as the adsorbent dosage increased and contact
time is prolonged. The adsorption isotherm model for Ni-IIP and NIP were fitted well with
Freundlich and Langmuir, respectively. Kinetic study for both Ni-IIP and NIP were followed
the pseudo-second order, indicates that the rate-limiting step is the surface adsorption that
involves chemisorption. Selectivity studies showed that the distribution coefficient of Ni2+
was higher compared to Zn2+, Mg2+ and Pb2+. The present work has successfully synthesized
Ni-IIP particles with good potential in recognition of Ni2+ ions in an aqueous medium.
Population in urban centers in Kenya is increasing rapidly due to rural urban migration in search of better paying jobs. This migration has resulted in unauthorized settlements in the various urban centers. The income per capital of these people is less than a dollar a day. The amount of money is inadequate for survival and this has resulted into cultivating on open grounds for food crops. Unfortunately, these slums have come up along rivers, which carry, wastewater from household and industries. This wastewater is rich in heavy metals and the inhabitants of these areas use this contaminated water for irrigating their crops. The food crops from such areas have very high levels of heavy metals. The present study has screened Zea mays, Commelina bengalensis and Amaranthus hybridus for their ability to bioaccumulate these metals from contaminated soils using atomic absorption spectrophotometer (AAS). The results obtained showed that the C. bengalensis has high potential for removal of Cu, Pb and Cd metals as compared to the Zea mays and Amaranthus hybridus even though, results showed that C. bengalensis has a low potential for the removal of Zn as compared to Zea mays and Amaranthus hybridus.
In the present study, capability of water hyacinth in removing heavy metals such as Cadmium (Cd), Chromium (Cr), Copper (Cu), Zinc (Zn), Iron (Fe), and Boron (B) in ceramic wastewater was investigated. The metal removal efficiency was identified by evaluating the translocation of metals in roots, leaves and shoot of water hyacinth. The heavy metal removal efficiency followed the order Fe>Zn>Cd>Cu>Cr>B during the treatment process. Water hyacinth had luxury consumption of those 6 elements. This study used the circulation system with 3 columns of plants which functioned as bioremediation of the sample. The concentration of metals in roots is much higher 10 times than leaves and stems. Roots give the result of metalR>metalL. The removal concentration from water hyacinth was estimated under pH of 8.21 to 8.49. This study proves water hyacinth to be a best plant for phytoremediation process
The use of polymeric material in heavy metal removal from wastewater is trending. Heavy metal removal from wastewater of the industrial process is of utmost importance in green/sustainable manufacturing. Production of absorbent materials from a natural source for industrial wastewater has been on the increase. In this research, polyurethane foam (PUF), an adsorbent used by industries to adsorb heavy metal from wastewater, was prepared from a renewable source. Castor oil-based polyurethane foam (COPUF) was produced and modified for improved adsorption performance using fillers, analyzed with laser-induced breakdown spectroscopy (LIBS). The fillers (zeolite, bentonite, and activated carbon) were added to the COPUF matrix allowing the modification on its surface morphology and charge. The materials were characterized using Fourier-transform infrared (FTIR), scanning electron microscopy (SEM), and thermal gravimetry analysis (TGA), while their adsorption performance was studied by comparing the LIBS spectra. The bentonite-modified COPUF (B/COPUF) gave the highest value of the normalized Pb I (405.7 nm) line intensity (2.3), followed by zeolite-modified COPUF (Z/COPUF) (1.9), and activated carbon-modified COPUF (AC/COPUF) (0.2), which indicates the adsorption performance of Pb2+ on the respective materials. The heavy metal ions' adsorption on the B/COPUF dominantly resulted from the electrostatic attraction. This study demonstrated the potential use of B/COPUF in adsorption and LIBS quantitative analysis of aqueous heavy metal ions.
Metallic contamination in seafood, especially fish, has been of increasing concern to human health. Moreover, with increasing dependency on farmed fish for fish resources, the metallic contamination in them is still questionable. This study aimed to investigate the effects of cooking (steaming) on heavy metal concentration in farmed fish and to estimate its potential human health risk. Farmed sea basses (Lates calcarifer) from Setiu Lagoon were used to study the difference in metal uptake through human consumption of raw and cooked (steamed) fish samples. Selected heavy metals, namely copper (Cu), zinc (Zn), arsenic (As), cadmium (Cd), mercury (Hg) and lead (Pb), were measured using ICP-MS following Teflon bomb closed digestion of the fish samples. Cooking of the fish muscle by steaming was applied to investigate if cooking changes the concentration of heavy metals. Mercury and As were found accumulated more notably in the fish muscle, though only Hg was found to show significant (p > 0.05) increase when L. calcarifer is cooked. The amount of As in the fish muscle throughout its growth can be potentially harmful to humans, with the highest averaged concentration at 3.29 ± 0.65 mg/kg dw. above the standard set by the Malaysian Food Regulation (1985) of >1 mg/kg. All the other heavy metals were at relatively safe concentrations well below the standard set by both national and international guidelines. The PTWI per individual of L. calcarifer for As was at 0.84 mg/kg bw., which indicated that the amount of this fish safe for consumption without any adverse effect is 170 g/week. Therefore, long-term intake of these fish may pose a risk to human health due to the relatively higher Hg and As concentration found in these fishes.
The present study investigates heavy metal uptake and protein expression by different vegetables collected from various districts of Khyber Pakhtunkhawa province of Pakistan. Statistical analysis of the data showed that maximum concentration of Cd, Cr, Ni, Zn were found in radish and spinach, respectively, collected from Peshawar. Maximum Pb and Mg accumulation were found in cauliflower and pea at Swat followed by coriander at Haripur and minimum Pb uptake was noticed in radish taken from Nowshehra. Highest Cu uptake was detected in spinach at Nowshehra. Data regarding Cd, Cr, Pb, Cu, Ni, Mg and Zn concentration in water samples gathered from different sites of KPK indicated that maximum concentration of Cd was observed in Swat. Maximum Cr and Cu concentration were measured in water samples from Peshawar while maximum concentration of Pb and Ni were detected in water samples from Haripur. In case of soil samples, maximum Cd, Cr, Mg and Zn uptake was observed in soil sample at Nowshehra. Maximum Pb and Ni concentration was found in soil samples collected from Peshawar. Cu concentration was observed to be the highest in soil at Swat. Protein profile of different vegetables i.e. cauliflower, radish, carrot, turnip, pea, spinach, coriander and garlic sampled across five different sites showed that uptake of Cd, Cr, Pb, Cu, Ni, Mg and Zn by these vegetables caused the expression of numerous polypeptides.