MyMedR

Displaying publications 21 - 40 of 47 in total

Abstract:

Sort:

Comparative performance of free surface and sub-surface flow systems in the phytoremediation of hydrocarbons using Scirpus grossus

Al-Baldawi IA, Abdullah SR, Suja F, Anuar N, Mushrifah I

J Environ Manage, 2013 Nov 30;130:324-30.
PMID: 24113536 DOI: 10.1016/j.jenvman.2013.09.010

Two types of flow system, free surface flow (FSF) and sub-surface flow (SSF), were examined to select a better way to remove total petroleum hydrocarbons (TPH) using diesel as a hydrocarbon model in a phytotoxicity test to Scirpus grossus. The removal efficiencies of TPH for the two flow systems were compared. Several wastewater parameters, including temperature (T, °C), dissolved oxygen (DO, mgL(-1)), oxidation-reduction potential (ORP, mV), and pH were recorded during the experimental runs. In addition, overall plant lengths, wet weights, and dry weights were also monitored. The phytotoxicity test using the bulrush plant S. grossus was run for 72 days with different diesel concentrations (1%, 2%, and 3%) (Vdiesel/Vwater). A comparison between the two flow systems showed that the SSF system was more efficient than the FSF system in removing TPH from the synthetic wastewater, with average removal efficiencies of 91.5% and 80.2%, respectively. The SSF system was able to tolerate higher diesel concentrations than was the FSF system.
Pollution control technologies for the treatment of palm oil mill effluent (POME) through end-of-pipe processes

Wu TY, Mohammad AW, Jahim JM, Anuar N

J Environ Manage, 2010 Jul;91(7):1467-90.
PMID: 20231054 DOI: 10.1016/j.jenvman.2010.02.008

Palm oil production is one of the major industries in Malaysia and this country ranks one of the largest productions in the world. In Malaysia, the total production of crude palm oil in 2008 was 17,734,441 tonnes. However, the production of this amount of crude palm oil results in even larger amounts of palm oil mill effluent (POME). In the year 2008 alone, at least 44 million tonnes of POME was generated in Malaysia. Currently, the ponding system is the most common treatment method for POME but other processes such as aerobic and anaerobic digestion, physicochemical treatment and membrane filtration may also provide the palm oil industries with possible insights into the improvement of POME treatment processes. Generally, open ponding offers low capital and operating costs but this conventional method is becoming less attractive because the methane produced is wasted to the atmosphere and the system can not be certified for Carbon Emission Reduction trading. On the other hand, anaerobic digestion of POME provides the fastest payback of investment because the treatment enables biogas recovery for heat generation and treated effluent for land application. Lastly, it is proposed herewith that wastewater management based on the promotion of cleaner production and environmentally sound biotechnologies should be prioritized and included as a part of the POME management in Malaysia for attaining sustainable development. This paper thus discusses and compares state-of-the-art POME treatment methods as well as their individual performances.
Validation of Occupational Zoonotic Disease Questionnaire Using Fuzzy Delphi Method

Sulaiman HF, Ismail R, Mohd Yusoff H, Anuar N, Mohd Jamil MR, Daud F

J Agromedicine, 2020 04;25(2):166-172.
PMID: 31533524 DOI: 10.1080/1059924X.2019.1666763

Objective: The Fuzzy Delphi Method (FDM) is one of the phases in Design and Development Research (DDR). It is a systematic method for tool development and validation. This article aims to validate an occupational zoonotic disease questionnaire using this technique. DDR is applied going through phase 1 (needs analysis), phase 2 (development and design), and phase 3 (usability).Method: In phase 1, information about safe work practices and occupational zoonotic exposure was obtained from discussions to verify predetermined domains as stated in The National Park Service survey on zoonotic disease exposure and risk. In phase 2, agreement from 14 experts about the domains was obtained using the FDM. In phase 3, a cognitive debriefing was performed to determine its usability for future studies. A total of five superior domains were verified, and their items were adapted. All domains and their items were submitted to experts to obtain consensus agreement.Results: A total of 31 (96.9%) passed the Triangle of Fuzzy Numbers and Defuzzification process with acceptable consensus agreement (78.8-91.9%) and threshold d value (0.07-0.14). Only four veterinarians were needed for cognitive debriefing to achieve the point of saturation.Conclusion: FDM in DDR is suitable to be applied by various professions for tool validation, as it is doable and cost and time effective. The Occupational Zoonotic Disease Questionnaire is now ready to be used for future studies in Malaysia.
Phytotoxicity of wastewater containing lead (Pb) effects Scirpus grossus

Tangahu BV, Abdullah SR, Basri H, Idris M, Anuar N, Mukhlisin M

Int J Phytoremediation, 2013;15(8):814-26.
PMID: 23819277

Phytoremediation is an environment-friendly and cost-effective method to clean the environment of heavy metal contamination. A prolonged phytotoxicity test was conducted in a single exposure. Scirpus grossus plants were grown in sand to which the diluted Pb (NO3)2 was added, with the variation of concentration were 0, 100, 200, 400, 600, and 800 mg/L. It was found that Scirpus grossus plants can tolerate Pb at concentrations of up to 400 mg/L. The withering was observed on day-7 for Pb concentrations of 400 mg/L and above. 100% of the plants withered with a Pb concentration of 600 mg/L on day 65. The Pb concentration in water medium decreased while in plant tissues increased. Adsorption of Pb solution ranged between 2 to 6% for concentrations of 100 to 800 mg/L. The Bioaccumulation Coefficient and Translocation Factor of Scirpus grossus were found greater than 1, indicating that this species is a hyperaccumulator plant.
Phytoremediation of wastewater containing lead (Pb) in pilot reed bed using Scirpus grossus

Tangahu BV, Abdullah SR, Basri H, Idris M, Anuar N, Mukhlisin M

Int J Phytoremediation, 2013;15(7):663-76.
PMID: 23819266

Phytoremediation is a technology to clean the environment from heavy metals contamination. The objectives of this study are to threat Pb contaminated wastewater by using phytoremediation technology and to determine if the plant can be mention as hyperaccumulator. Fifty plants of Scirpus grossus were grown in sand medium and 600 L spiked water in various Pb concentration (10, 30 and 50 mg/L) was exposed. The experiment was conducted with single exposure method, sampling time on day-1, day-14, day-28, day-42, day-70, and day-98. The analysis of Pb concentration in water, sand medium and inside the plant tissue was conducted by ICP-OES. Water samples were filtered and Pb concentration were directly analyzed, Pb in sand samples were extracted by EDTA method before analyzed, and Pb in plant tissues were extracted by wet digestion method and analyzed. The results showed that on day-28, Pb concentration in water decreased 100%, 99.9%, 99.7%, and the highest Pb uptake by plant were 1343, 4909, 3236 mg/kg for the treatment of 10, 30, and 50 mg/L respectively. The highest BC and TF were 485,261 on day-42 and 2.5295 on day-70 of treatment 30 mg/L, it can be mentioned that Scirpus grossus is a hyperaccumulator.
Statistical optimization of the phytoremediation of arsenic by Ludwigia octovalvis- in a pilot reed bed using response surface methodology (RSM) versus an artificial neural network (ANN)

Titah HS, Halmi MIEB, Abdullah SRS, Hasan HA, Idris M, Anuar N

Int J Phytoremediation, 2018 Jun 07;20(7):721-729.
PMID: 29723047 DOI: 10.1080/15226514.2017.1413337

In this study, the removal of arsenic (As) by plant, Ludwigia octovalvis, in a pilot reed bed was optimized. A Box-Behnken design was employed including a comparative analysis of both Response Surface Methodology (RSM) and an Artificial Neural Network (ANN) for the prediction of maximum arsenic removal. The predicted optimum condition using the desirability function of both models was 39 mg kg-1 for the arsenic concentration in soil, an elapsed time of 42 days (the sampling day) and an aeration rate of 0.22 L/min, with the predicted values of arsenic removal by RSM and ANN being 72.6% and 71.4%, respectively. The validation of the predicted optimum point showed an actual arsenic removal of 70.6%. This was achieved with the deviation between the validation value and the predicted values being within 3.49% (RSM) and 1.87% (ANN). The performance evaluation of the RSM and ANN models showed that ANN performs better than RSM with a higher R2 (0.97) close to 1.0 and very small Average Absolute Deviation (AAD) (0.02) and Root Mean Square Error (RMSE) (0.004) values close to zero. Both models were appropriate for the optimization of arsenic removal with ANN demonstrating significantly higher predictive and fitting ability than RSM.
Microwave non-destructive testing technique for characterization of HPMC-PEG 3000 films

Wong TW, Deepak KG, Taib MN, Anuar NK

Int J Pharm, 2007 Oct 1;343(1-2):122-30.
PMID: 17597317

The capacity of microwave non-destructive testing (NDT) technique to characterize the matrix property of binary polymeric films for use as transdermal drug delivery system was investigated. Hydroxypropylmethylcellulose (HPMC) and polyethylene glycol (PEG) 3000 were the choice of polymeric matrix and plasticizer, respectively with loratadine as the model drug. Both blank and drug loaded HPMC-PEG 3000 films were prepared using the solvent-evaporation method. These films were conditioned at the relative humidity of 25, 50 and 75% prior to physicochemical characterization using the established methods of ultra-violet spectrophotometry, differential scanning calorimetry and Fourier transform infrared spectroscopy methods, as well as, novel microwave NDT technique. Blank films exhibited a greater propensity of polymer-polymer interaction at the O-H domain upon storage at a lower level of relative humidity, whereas drug loaded films exhibited a greater propensity of polymer-polymer, polymer-plasticizer and/or drug-polymer interaction via the O-H, C-H and/or aromatic C=C functional groups when they were stored at a lower or moderate level of relative humidity. The absorption and transmission characteristics of both blank and drug loaded films for microwave varied with the state of polymer-polymer, polymer-plasticizer, and/or drug-polymer interaction of the matrix. The measurements of microwave NDT test at 8 and 12 GHz were sensitive to the polar fraction of film involving functional group such as O-H moiety and the less polar environment of matrix consisting of functional groups such as C-H and aromatic C=C moieties. The state of interaction between polymer, plasticizer and/or drug of a binary polymeric film can be elucidated through its absorption and transmission profiles of microwave.
Fulltext Arsenic Resistance and Biosorption by Isolated Rhizobacteria from the Roots of Ludwigia octovalvis

Titah HS, Abdullah SRS, Idris M, Anuar N, Basri H, Mukhlisin M, et al.

Int J Microbiol, 2018;2018:3101498.
PMID: 30723505 DOI: 10.1155/2018/3101498

Certain rhizobacteria can be applied to remove arsenic in the environment through bioremediation or phytoremediation. This study determines the minimum inhibitory concentration (MIC) of arsenic on identified rhizobacteria that were isolated from the roots of Ludwigia octovalvis (Jacq.) Raven. The arsenic biosorption capability of the was also analyzed. Among the 10 isolated rhizobacteria, five were Gram-positive (Arthrobacter globiformis, Bacillus megaterium, Bacillus cereus, Bacillus pumilus, and Staphylococcus lentus), and five were Gram-negative (Enterobacter asburiae, Sphingomonas paucimobilis, Pantoea spp., Rhizobium rhizogenes, and Rhizobium radiobacter). R. radiobacter showed the highest MIC of >1,500 mg/L of arsenic. All the rhizobacteria were capable of absorbing arsenic, and S. paucimobilis showed the highest arsenic biosorption capability (146.4 ± 23.4 mg/g dry cell weight). Kinetic rate analysis showed that B. cereus followed the pore diffusion model (R2 = 0.86), E. asburiae followed the pseudo-first-order kinetic model (R2 = 0.99), and R. rhizogenes followed the pseudo-second-order kinetic model (R2 = 0.93). The identified rhizobacteria differ in their mechanism of arsenic biosorption, arsenic biosorption capability, and kinetic models in arsenic biosorption.
Fulltext Effects of different drying methods on essential oil yield and component profile of Polygonum minus root extract

Azhari, N. A. M., Markom, M., Ismail, I., Anuar, N.

International Food Research Journal, 2020;27(1):96-102.
MyJurnal

Polygonum minus is a plant rich with bioactive components that contribute to food, pharmaceutical, and perfume industries. However, high moisture content in fresh plants will allow
microbial activity that leads to the degradation of plant quality. This can be prevented by
drying the fresh plants to preserve the characteristics of their bioactive components. The
present work was conducted to determine the effect of different drying methods such as
air-drying, oven-drying (40 and 60°C), and freeze-drying on essential oil (EO) yield and
chemical compounds of P. minus roots. For comparison purposes, all samples were extracted
by maceration with n-hexane at room temperature. Then, the samples were analysed and
identified by using gas chromatography-mass spectrometry (GC-MS). The highest EO yield
extract was obtained from freeze-drying (4.15 ± 0.5), followed by air-drying (3.79 ± 0.19). EO
yield from oven-drying at 40 and 60°C was 3.4 ± 0.14 and 0.86 ± 0.04, respectively. Results
showed that by increasing the drying temperature, the EO yield would decrease and cause a
loss of major chemical compounds in the P. minus root. Air-drying was found to be the best
method in preserving the presence of important chemical compound in P. minus roots such as
β-caryophyllene (1.43%), pentadecane (4.34%), hexadecanoic acid (3.91%) and oleic acid
(3.97%).
Fulltext Cell-based influenza vaccine: current production, halal status assessment, and recommendations towards Islamic-compliant manufacturing

Zulkarnain NN, Anuar N, Abd Rahman N, Sheikh Abdullah SR, Alias MN, Yaacob M, et al.

Hum Vaccin Immunother, 2021 07 03;17(7):2158-2168.
PMID: 33539195 DOI: 10.1080/21645515.2020.1865044

Influenza virus is a life-threatening pathogen that infects millions of people every year, with annual mortality in the hundreds of thousands. The scenario for controlling infection has worsened with increasing numbers of vaccine hesitancy cases reported worldwide due to objections on safety, religious and other grounds. Uses of haram (impermissible) and mashbooh (doubtful) ingredients in vaccine production has raised doubts among Muslim consumers and consequently stimulated serious vaccine hesitancy. To address this major problem, we have reviewed and recommended some alternatives appropriate for manufacturing cell-based influenza vaccine which comply with Islamic laws and consumers' needs. Intensive assessments of current influenza vaccine production in both scientific and Islamic views have led to the identification of four main ingredients deemed impermissible in novel sharia-compliant (approved by Islamic laws) vaccine manufacturing. Only some of these impermissible components could be replaced with halal (permissible) alternatives, while others remain impermissible due to unavailability and unsuitability.
Fulltext Development and characterisation of ibuprofen-loaded nanoemulsion with enhanced oral bioavailability

Anuar N, Sabri AH, Bustami Effendi TJ, Abdul Hamid K

Heliyon, 2020 Jul;6(7):e04570.
PMID: 32775730 DOI: 10.1016/j.heliyon.2020.e04570

Lipophilic compounds constitute a majority of therapeutics in the pipeline of drug discovery. Despite possessing enhanced efficacy and permeability, some of these drugs suffer poor solubility necessitating the need of a suitable drug delivery system. Nanoemulsion is a drug delivery system that provides enhanced solubility for poorly soluble drugs in an attempt to improve the oral bioavailability. The purpose of this study is to develop a nanoemulsion system using ibuprofen as a model drug in order to investigate the potential of this colloidal system to enhance the absorption of poorly water-soluble drugs. Ibuprofen loaded-nanoemulsion with different drug concentrations (1.5, 3 and 6% w/w) were formulated from olive oil, sucrose ester L-1695 and glycerol using D-phase emulsification technique. A pseudoternary phase diagram was utilised to identify the optimal excipient composition to formulate the nanoemulsion system. In vitro diffusion chamber studies using rodent intestinal linings highlighted improved absorption profile when ibuprofen was delivered as nanoemulsion in comparison to microemulsions and drug-in-oil systems. This was further corroborated by in vivo studies using rat model that highlighted a two-fold increase in ibuprofen absorption when the drug was administered as a nanoemulsion relative to drug-in-oil system. On the other hand, when ibuprofen was administered as microemulsions, only a 1.5-fold increase in absorption was observed relative to drug-in-oil system. Thus, this study highlights the potential of using nanoemulsion as a drug delivery system to enhance the oral bioavailability of hydrophobic drugs.
Fulltext Species-Specific Deoxyribonucleic Acid (DNA) Identification of Bovine in Cultured Meat Serum for halal Status

Mohd Kashim MIA, Abdul Haris AA, Hasim NA, Abd Mutalib S, Anuar N

Foods, 2022 Oct 17;11(20).
PMID: 37430984 DOI: 10.3390/foods11203235

Meat culturing technology goes beyond laboratory research and materialises in the market. Nonetheless, this technology has raised concerns among Muslim consumers worldwide due to its medium, especially foetal bovine serum (FBS), which originates from blood. Thus, the aim of this research was to determine the halal status of cultured meat by detecting species-specific DNA of bovine serum as one of the media used during meat production. Polymerase chain reaction (PCR) analysis was conducted by targeting mitochondrial cytochrome oxidase II (COII) gene sequences, producing a 165 bp amplicon. The sequences of the primers used were Bovine-F, 5'-CAT CAT AGC AAT TGC CAT AGT CC-3' and Bovine-R, 5'-GTA CTA GTA GTA TTA GAG CTA GAA TTA G-3'. DNA extraction was conducted using a QIAGEN Blood and Tissue™ commercial kit. The presence study also included a literature review on the Istihalah (transformation) concept in order to determine the halal status of cultured meat. The results revealed that bovine DNA was detected in all samples tested using PCR analysis. Therefore, Istihalah tammah (perfect transformation) does not occur due to the ability of PCR analysis to detect bovine DNA in FBS and is prohibited according to Shariah law.
Do the physical and environment PETTLEP elements predict sport imagery ability?

Anuar N, Williams SE, Cumming J

Eur J Sport Sci, 2017 Nov;17(10):1319-1327.
PMID: 28950801 DOI: 10.1080/17461391.2017.1377290

The present study aimed to examine whether physical and environment elements of PETTLEP imagery relate to the ability to image five types of sport imagery (i.e. skill, strategy, goal, affect and mastery). Two hundred and ninety participants (152 males, 148 females; Mage = 20.24 years, SD = 4.36) from various sports completed the Sport Imagery Ability Questionnaire (SIAQ), and a set of items designed specifically for the study to assess how frequently participants incorporate physical (e.g. 'I make small movements or gestures during the imagery') and environment (e.g. 'I image in the real training/competition environment') elements of PETTLEP imagery. Structural equation modelling tested a hypothesised model in which imagery priming (i.e. the best fitting physical and environment elements) significantly and positively predicted imagery ability of the different imagery types (skill, β = 0.38; strategy, β = 0.23; goal, β = 0.21; affect, β = 0.25; mastery, β = 0.22). The model was a good fit to the data: χ2(174) = 263.87, p
Cytotoxicity evaluation of ketoprofen found in pharmaceutical wastewater on HEK 293 cell growth and metabolism

Zulkarnain NN, Anuar N, Johari NA, Sheikh Abdullah SR, Othman AR

Environ Toxicol Pharmacol, 2020 Nov;80:103498.
PMID: 32950717 DOI: 10.1016/j.etap.2020.103498

Inefficient ketoprofen removal from pharmaceutical wastewater may negatively impact the ecosystem and cause detrimental risks to human health. This study was conducted to determine the cytotoxicity effects of ketoprofen on HEK 293 cell growth and metabolism, including cyclooxygenase-1 (COX-1) expression, at environmentally relevant concentrations. The cytotoxic effects were evaluated through the trypan blue test, DNS assay, MTT assay, and the expression ratio of the COX-1 gene. The results of this study show insignificant (p > 0.05) cytotoxic effects of ketoprofen on cell viability and cell metabolism. However, high glucose consumption rates among the treated cells cause an imitation of the Warburg effect, which is likely linked to the development of cancer cells. Apart from that, the upregulation of COX-1 expression among the treated cells indicates remote possibility of inflammation. Although no significant cytotoxic effects of ketoprofen were detected throughout this study, the effects of prolonged exposure of residual ketoprofen need to be evaluated in the future.
Phytoremediation of contaminated soils containing gasoline using Ludwigia octovalvis (Jacq.) in greenhouse pots

Al-Mansoory AF, Idris M, Abdullah SRS, Anuar N

Environ Sci Pollut Res Int, 2017 May;24(13):11998-12008.
PMID: 26330312 DOI: 10.1007/s11356-015-5261-5

Greenhouse experiments were carried out to determine the phytotoxic effects on the plant Ludwigia octovalvis in order to assess its applicability for phytoremediation gasoline-contaminated soils. Using plants to degrade hydrocarbons is a challenging task. In this study, different spiked concentrations of hydrocarbons in soil (1, 2, and 3 g/kg) were tested. The results showed that the mean efficiency of total petroleum hydrocarbon (TPH) removal over a 72-day culture period was rather high. The maximum removal of 79.8 % occurred for the 2 g/kg concentration, while the removal rate by the corresponding unplanted controls was only (48.6 %). The impact of gasoline on plants included visual symptoms of stress, yellowing, growth reduction, and perturbations in the developmental parameters. The dry weight and wet weight of the plant slightly increased upon exposure to gasoline until day 42. Scanning electron microscopy (SEM) indicated change to the root and stem structure in plant tissue due to the direct attachment with gasoline contaminated compared to the control sample. The population of living microorganisms in the contaminated soil was found to be able to adapt to different gasoline concentrations. The results showed that L. octovalvis and rhizobacteria in gasoline-contaminated soil have the potential to degrade organic pollutants.
Pre-operative psoas muscle index, a surrogate for sarcopenia; as a predictor of post-esophagectomy complications

Yunrong T, Jin WW, Mahendran HA, Koon YB, Jahit S, Kamaruddin MA, et al.

Dis Esophagus, 2024 Apr 02;37(4).
PMID: 38163959 DOI: 10.1093/dote/doad072

BACKGROUND: Esophagectomy is the standard of care for curative esophageal cancer. However, it is associated with significant morbidity and mortality. Esophageal cancer is known to negatively affect the nutritional status of patients and many manifest cancer sarcopenia. At present, measures of sarcopenia involve complex and often subjective measurements. We assess whether the Psoas Muscle Index (PMI); an inexpensive, simple, validated method used to diagnose sarcopenia, can be used to predict adverse outcomes in patients after curative esophagectomy.
METHODS: Multi-centre, retrospective cohort between 2010-2020, involving all consecutive patients undergoing curative esophagectomy for esophageal cancer in University Malaya Medical Centre, Sungai Buloh Hospital, and Sultanah Aminah Hospital. The cut-off value differentiating low and normal PMI is defined as 443mm2/m2 in males and 326326 mm2/m2 in females. Complications were recorded using the Clavien-Dindo Scale.
RESULTS: There was no statistical correlation between PMI and major post-esophagectomy complications (p-value: 0.495). However, complication profile was different, and patients with low PMIs had higher 30-day mortality (21.7%) when compared with patients with normal PMI (8.1%) (p-value: 0.048).
CONCLUSIONS: Although PMI did not significantly predict post-esophagectomy complications, low PMI correlates with higher 30-day mortality, reflecting a lower tolerance for complications among these patients. PMI is a useful, inexpensive tool to identify sarcopenia and aids the patient selection process. This alerts healthcare professionals to institute intensive physiotherapy and nutritional optimization prior to esophagectomy.
Response and capability of Scirpus mucronatus (L.) in phytotreating petrol-contaminated soil

Almansoory AF, Idris M, Abdullah SRS, Anuar N, Kurniawan SB

Chemosphere, 2021 Apr;269:128760.
PMID: 33162166 DOI: 10.1016/j.chemosphere.2020.128760

The greenhouse phytotoxicity experiment was conducted to analyse and assess the capability of Scirpus mucronatus (L.) in tolerating and removing petrol in contaminated soil. This research was conducted for 72 days by using 5, 10 and 30 g/kg petrol as soil contaminants. Results showed that the system planted with S. mucronatus (L.) had high potential to treat the 10 g/kg petrol-contaminated soil and had an average Total Petroleum Hydrocarbon (TPH) removal of 82.1%. At 5 and 30 g/kg petrol, the planted system removed 74.9% and 75.8% TPH, respectively. The petrol (10 g/kg) affected the plant growth positively, which was indicated by the increase in dry and wet weights throughout the research period. The removal of the TPH in the system was performed because of the interaction of plants and rhizobacteria. SEM showed that a high concentration of petrol (30 g/kg) affected the plant tissue negatively, as indicated by the altered structures of the root and stem cells. EDX results also confirmed that petrol was absorbed by the plant, as shown by the increased carbon content in the plant's root and stem after the treatment.
Lead (Pb) removal from contaminated water using constructed wetland planted with Scirpus grossus: Optimization using response surface methodology (RSM) and assessment of rhizobacterial addition

Tangahu BV, Sheikh Abdullah SR, Basri H, Idris M, Anuar N, Mukhlisin M

Chemosphere, 2022 Mar;291(Pt 3):132952.
PMID: 34798103 DOI: 10.1016/j.chemosphere.2021.132952

Lead (Pb) is one of the toxic heavy metals that pollute the environment as a result of industrial activities. This study aims to optimize Pb removal from water by using horizontal free surface flow constructed wetland (HFSFCW) planted with Scirpus grossus. Optimization was conducted using response surface methodology (RSM) under Box-Behnken design with the operational parameters of initial Pb concentration, retention time, and aeration. Optimization results showed that 37 mg/L of initial Pb concentration, 32 days of retention time, and no aeration were the optimum conditions for Pb removal by using the systems. Validation test was run under two different conditions, namely, non-bioaugmented and bioaugmented with rhizobacteria (Bacillus cereus, B. pumilus, B. subtilis, Brevibacillus choshinensis, and Rhodococcus rhodochrous). Results of the validation test showed that Pb removal in water achieved 99.99% efficiency with 0.2% error from the RSM prediction, while the adsorption of Pb by plants reached 5160.18 mg/kg with 10.6% error from the RSM prediction. The bioaugmentation of the five rhizobacterial species showed a slight improvement in Pb removal from water and Pb adsorption by plants. However, no significant improvement was achieved (p
Arsenic toxicity on Ludwigia octovalvis in spiked sand

Titah HS, Abdullah SR, Mushrifah I, Anuar N, Basri H, Mukhlisin M

Bull Environ Contam Toxicol, 2013 Jun;90(6):714-9.
PMID: 23595348 DOI: 10.1007/s00128-013-0996-5

Wilting, especially of the leaves, was observed as an initial symptom of arsenate [As(V)] to Ludwigia octovalvis (Jacq.) P. H. Raven. The plants tolerated As(V) levels of 39 mg kg⁻¹ for as long as 35 days of exposure. After 91 days, the maximum concentration of As uptake in the plant occurred at As(V) concentration of 65 mg kg⁻¹ while As concentration in the stems, roots and leaves were 6139.9 ± 829.5, 1284.5 ± 242.9 and 1126.1 ± 117.2 mg kg⁻¹, respectively. In conclusion, As(V) could cause toxic effects in L. octovalvis and the plants could uptake and accumulate As in plant tissues.
Imagery training for Malaysian paralympics athletes - an important step towards sports equity

Anuar N, Bahar N

Br J Sports Med, 2023 Mar 13.
PMID: 36914222 DOI: 10.1136/bjsports-2023-106809

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links