Displaying publications 21 - 40 of 52 in total

Abstract:
Sort:
  1. Reynolds G, Payne J, Sinun W, Mosigil G, Walsh RP
    Philos Trans R Soc Lond B Biol Sci, 2011 Nov 27;366(1582):3168-76.
    PMID: 22006960 DOI: 10.1098/rstb.2011.0154
    In an earlier special issue of this journal, Marsh & Greer summarized forest land use in Sabah at that time and gave an introduction to the Danum Valley Conservation Area. Since that assessment, during the period 1990-2010, the forests of Sabah and particularly those of the ca 10 000 km(2) concession managed on behalf of the State by Yayasan Sabah (the Sabah Foundation) have been subject to continual, industrial harvesting, including the premature re-logging of extensive tracts of previously only once-logged forest and large-scale conversion of natural forests to agricultural plantations. Over the same period, however, significant areas of previously unprotected pristine forest have been formally gazetted as conservation areas, while much of the forest to the north, the south and the east of the Danum Valley Conservation Area (the Ulu Segama and Malua Forest Reserves) has been given added protection and new forest restoration initiatives have been launched. This paper analyses these forest-management and land-use changes in Sabah during the period 1990-2010, with a focus on the Yayasan Sabah Forest Management Area. Important new conservation and forest restoration and rehabilitation initiatives within its borders are given particular emphasis.
  2. Soon YY, Junaidi I, Kumarasamy V, Chem YK, Juliana R, Chua KB
    Med J Malaysia, 2007 Aug;62(3):214-7.
    PMID: 18246910 MyJurnal
    Since its isolation in Tanzania in 1953, chikungunya virus has caused periodic outbreaks in both tropical Africa and Asia. In the last decade, the virus has shown not only increased activity but has expanded its geographical locations, thus classical delineation of various genotypes of chikungunya virus to specific geographic locales no longer holds true. Rapid mass movement of people and the constant presence of the right vectors in this region could have contributed to the change in virus ecology. This paper documents the first detection of chikungunya virus of Central/East genotype in Malaysia from a patient who was most likely infected with the virus during her visit to India. Without good Aedes vector measures, only time will tell whether this genotype rather than the existing endemic genotype will subsequently cause the next chikungunya outbreak in Malaysia.
  3. Ng H, Tan WH, Abdullah J, Tong HL
    ScientificWorldJournal, 2014;2014:376569.
    PMID: 25143972 DOI: 10.1155/2014/376569
    This paper describes the acquisition setup and development of a new gait database, MMUGait. This database consists of 82 subjects walking under normal condition and 19 subjects walking with 11 covariate factors, which were captured under two views. This paper also proposes a multiview model-based gait recognition system with joint detection approach that performs well under different walking trajectories and covariate factors, which include self-occluded or external occluded silhouettes. In the proposed system, the process begins by enhancing the human silhouette to remove the artifacts. Next, the width and height of the body are obtained. Subsequently, the joint angular trajectories are determined once the body joints are automatically detected. Lastly, crotch height and step-size of the walking subject are determined. The extracted features are smoothened by Gaussian filter to eliminate the effect of outliers. The extracted features are normalized with linear scaling, which is followed by feature selection prior to the classification process. The classification experiments carried out on MMUGait database were benchmarked against the SOTON Small DB from University of Southampton. Results showed correct classification rate above 90% for all the databases. The proposed approach is found to outperform other approaches on SOTON Small DB in most cases.
  4. Awang-Junaidi AH, Fayaz MA, Kawamura E, Sobchishin L, MacPhee DJ, Honaramooz A
    Cell Tissue Res, 2020 Aug;381(2):361-377.
    PMID: 32388763 DOI: 10.1007/s00441-020-03218-5
    Gonocytes in the neonatal testis have male germline stem cell potential. The objective of the present study was to examine the behavior and ultrastructure of gonocytes in culture. Neonatal porcine testis cells were cultured for 4 weeks and underwent live-cell imaging to explore real-time interactions among cultured cells. This included imaging every 1 h from day 0 to day 3, every 2 h from day 4 to day 7, and every 1 h for 24 h at days 14, 21, and 28. Samples also underwent scanning electron microscopy, transmission electron microscopy, morphometric evaluations, immunofluorescence, and RT-PCR. Live-cell imaging revealed an active amoeboid-like movement of gonocytes, assisted by the formation of extensive cytoplasmic projections, which, using scanning electron microscopy, were categorized into spike-like filopodia, leaf-like lamellipodia, membrane ruffles, and cytoplasmic blebs. In the first week of culture, gonocytes formed loose attachments on top of a somatic cell monolayer and, in week 2, formed grape-like clusters, which, over time, grew in cell number. Starting at week 3 of culture, some of the gonocyte clusters transformed into large multinucleated embryoid body-like colonies (EBLCs) that expressed both gonocyte- and pluripotent-specific markers. The number and diameter of individual gonocytes, the number and density of organelles within gonocytes, as well as the number and diameter of the EBLCs increased over time (P 
  5. Junaidi NSSA, Shakrin NNSM, Desa MNM, Yunus WMZW
    Malays J Med Sci, 2023 Apr;30(2):26-41.
    PMID: 37102054 DOI: 10.21315/mjms2023.30.2.3
    The global emergence of methicillin-resistant Staphylococcus aureus (MRSA) that unsusceptible to a wide selection of antimicrobial agents and any newly introduced antimicrobial over the past decades has triggered more extensive holistic measures to put an end to this situation. Molecular surveillance of MRSA clones is important to understand their evolutionary dynamics for investigating outbreaks, propagating precautionary measures, as well as planning for appropriate treatment. This review includes peer-reviewed reports on the molecular characterisation of clinical Staphylococcus aureus isolates within Malaysian hospitals from year 2008 to 2020. This work highlights the molecular clones of hospital-acquired MRSA (HA-MRSA) and community-acquired MRSA (CA-MRSA) isolates from Malaysian hospitals, with description on their ever-changing pattern. Among HA-MRSA, the ST22-t032-SCCmec IV MRSA clone was reported to supplant the previous dominating clone, ST239-t037-SCCmec III. Meanwhile, ST30, ST772, ST6 and ST22 were repeatedly detected in CA-MRSA, however, none of the strains became predominant. Future in-depth study on molecular epidemiology of MRSA clone is essential for the investigation of the extent of the clonal shift, especially in Malaysia.
  6. Junaidi A, Zulfiani U, Khomariyah S, Gunawan T, Widiastuti N, Sazali N, et al.
    RSC Adv, 2024 Jan 10;14(4):2311-2319.
    PMID: 38213981 DOI: 10.1039/d3ra06136a
    Many studies have shown that sulfur-containing compounds significantly affect the solubility of carbon dioxide (CO2) in adsorption processes. However, limited attention has been devoted to incorporating organic fillers containing sulfur atoms into gas separation membrane matrices. This study addressed the gap by developing a new membrane using a polysulfone (PSf) polymer matrix and polyphenylene sulfide (PPs) filler material. This membrane could be used to separate mixtures of H2/CH4 and CO2/CH4 gases. Our study investigated the impact of various PPs loadings (1%, 5%, and 10% w/w) relative to PSf on membrane properties and gas separation efficiency. Comprehensive characterization techniques, including Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and scanning electron microscopy (SEM), were employed to understand how adding PPs and coating with polydimethylsiloxane (PDMS) changed the structure of our membranes. XRD and FTIR analysis revealed distinct morphological disparities and functional groups between pure PSf and PSf/PPs composite membranes. SEM results show an even distribution of PPs on the membrane surface. The impact of adding PPs on gas separation was significant. CO2 permeability increased by 376.19%, and H2 permeability improved by 191.25%. The membrane's gas selection ability significantly improved after coating the surface with PDMS. CO2/CH4 separation increased by 255.06% and H2/CH4 separation by 179.44%. We also considered the Findex to assess the overall performance of the membrane. The 5% and 10% PPs membranes were exceptional. Adding PPs to membrane technology may greatly enhance gas separation processes.
  7. Hashim A, Hashim NA, Mohd Junaidi MU, Kamarudin D, Hussain MA
    Water Sci Technol, 2022 Sep;86(5):1055-1065.
    PMID: 36358045 DOI: 10.2166/wst.2022.253
    Flood is among the natural disasters that commonly happened in Malaysia every year. During the flood, victims faced clean water shortages and deterioration of the environment resulting in long waiting times for aid to access. Hence, affordable and efficient filters are needed to supply clean water in the affected areas. Application of xylem tissue inside plant stem has the potential as a filter for water filtration. This research focuses on xylem tissue in Malaysian tropical plants from cassava stem. Cassava stems were prepared in a small-scale set-up as the xylem was used as a filter. Effects of cross-sectional area and hydrostatic pressure were analyzed and the results showed a directly proportional relationship with permeate flow rate. Upon filtration with red dye solution, total dye removal was achieved using a xylem with a minimal length of 3 cm and onwards. While for bacteria removal, E. coli bacteria have been removed when tested with a bacteria count plate. Thus, this study demonstrated the potential of the xylem tissue of the cassava plant as affordable and available natural raw materials to be used as water filters during an emergency.
  8. Zohdi RM, Adli MA, Mukhtar SM, Awang Junaidi AH, Bakar MZA
    J Taibah Univ Med Sci, 2024 Dec;19(6):1181-1192.
    PMID: 39807375 DOI: 10.1016/j.jtumed.2024.12.008
    OBJECTIVE: Concerns over the increasing number of obese individuals and the associated health risks have prompted therapeutic option explorations. Similarly, this study aimed to establish Sygyzium claviflorum fruit extract (SCFE) anti-adipogenic attributes in 3T3-L1 cells.

    METHODS: The polyphenolic compounds in SCFE were identified with Reverse phase-high performance liquid chromatography (RP-HPLC). Meanwhile, murine 3T3-L1 preadipocytes, measuring leptin levels, reactive oxygen species (ROS), and lipid and triglyceride (TG) contents were utilized during anti-adipogenic activity assessments. Concurrently, the effects of SCFE on adipogenic transcription factors were established with quantitative real-time-polymerase chain reaction (qRT-PCR).

    RESULTS: The RP-HPLC results indicated three polyphenolic compounds in SCFE, including one flavonoid (naringin) and two phenolic acids (syringic and p-coumaric). Although SCFE treatments (250-1000 μg/mL) did not result in cell toxicity, they significantly reduced dose-dependent lipid accumulation, ROS production, and TG and leptin levels relative to control-differentiated adipocytes. Moreover, SCFE suppressed sterol regulatory element binding protein-1 (SREBP-1), peroxisome proliferator-activated receptor-gamma (PPAR-γ), and CCAAT/enhancer-binding protein-alpha (C/EBP-α) gene expressions during preadipocyte differentiation into adipocytes.

    CONCLUSION: The findings revealed the anti-adipogenic properties of SCFE, indicating its potential as a natural obesity management remedy. Nevertheless, more studies are necessary to elucidate the reactions resulting in SCFE anti-adipogenic effects and the active constituents responsible for the property.

  9. James A, Rahman MR, Junaidi EB, Jose Jol C, Namakka M
    RSC Adv, 2026 Oct 21;16(46):60778-60799.
    PMID: 42851815 DOI: 10.1039/d6ra06520a
    Hybrid polymeric membranes are often evaluated in terms of flux, rejection, and antifouling performance, whereas their adsorption kinetics and equilibrium behaviour are commonly treated as secondary considerations. This separation limits mechanistic understanding because dye removal by functional membranes is governed by the coupling between convective transport, pore-mediated retention, surface adsorption, filler dispersion and foulant-membrane interaction. This study aims to evaluate the kinetic and equilibrium behaviour of methylene blue (MB) adsorption by sequentially modified polyvinylidene fluoride (PVDF)-based hybrid membranes incorporating nanocellulose (NC), titanium dioxide (TiO2), graphene (GR) and graphene oxide-derived modified hybrid material (GO-mHM). Correspondingly, this study evaluates adsorption behaviour across the full sequence of membrane modification, enabling a comparative assessment of the contribution of each material component to adsorption kinetics and equilibrium performance, rather than limiting the analysis to the final optimised membrane formulation. Adsorption experiments were conducted at 25 °C using MB concentrations of 1-5 ppm, with adsorption capacity normalised to membrane area. The pseudo second order (PSO) model provided the most consistent kinetic fit with R 2 values generally ranging from 0.96 to 0.98. At 5 ppm MB, the equilibrium adsorption capacity increased from 1049.79 mg m-2 for pristine PVDF to 2080.69 mg m-2 for PVDF-4% NCM, followed by further improvement to 2408.14, 2442.68, and 2462.38 mg m-2 for PVDF/NC/3.0% TiO2, PVDF/NC/TiO2/0.2% GR, and PVDF/NC/TiO2/0.3% GO-mHM, respectively. Isotherm equilibrium modelling showed that the Freundlich model best described MB adsorption which indicates adsorption on a heterogeneous membrane surface with non-uniform adsorption sites. PVDF/NC/TiO2/0.3% GO-mHM exhibited the strongest adsorption response, recording a Freundlich K F of 75 501.71 mg m-2. These findings are consistent with MB adsorption occurring across chemically and structurally heterogeneous membrane domains, with filler composition, dispersion and interfacial accessibility influencing the observed adsorption response. The specific contributions of individual molecular interactions were not directly resolved and are therefore interpreted mechanistically rather than assigned as definitive adsorption pathways.
  10. Mohd Mokhtar K, Kasmani RM, Che Hassan CR, Hamid MD, Mohamad Nor MI, Mohd Junaidi MU, et al.
    ACS Omega, 2021 Jul 20;6(28):17831-17838.
    PMID: 34308018 DOI: 10.1021/acsomega.1c00967
    Extensive application of metal powder, particularly in nanosize could potentially lead to catastrophic dust explosion, due to their pyrophoric behavior, ignition sensitivity, and explosivity. To assess the appropriate measures preventing accidental metal dust explosions, it is vital to understand the physicochemical properties of the metal dust and their kinetic mechanism. In this work, explosion severity of aluminum and silver powder, which can be encountered in a passivated emitter and rear contact (PERC) solar cell, was explored in a 0.0012 m3 cylindrical vessel, by varying the particle size and powder concentration. The P max and dP/dt max values of metal powder were demonstrated to increase with decreasing particle size. Additionally, it was found that the explosion severity of silver powder was lower than that of aluminum powder due to the more apparent agglomeration effect of silver particles. The reduction on the specific surface area attributed to the particles' agglomeration affects the oxidation reaction of the metal powder, as illustrated in the thermogravimetric (TG) curves. A sluggish oxidation reaction was demonstrated in the TG curve of silver powder, which is contradicted with aluminum powder. From the X-ray photoelectron spectroscopy (XPS) analysis, it is inferred that silver powder exhibited two reactions in which the dominant reaction produced Ag and the other reaction formed Ag2O. Meanwhile, for aluminum powder, explosion products only comprise Al2O3.
  11. Zulfiani U, Junaidi A, Nareswari C, Ali BTI, Jaafar J, Widyanto AR, et al.
    RSC Adv, 2023 Mar 08;13(12):7789-7797.
    PMID: 36909764 DOI: 10.1039/d2ra07595d
    Industrial growth can have a good impact on a country's economic growth, but it can also cause environmental problems, including water pollution. About 80% of industrial wastewater is discharged into the environment without treatment, of which 17-20% is dominated by dyes, such as methylene blue (MB) and methyl orange (MO) from the textile industry. Only about 5% of a textile dye is used in the dyeing process and the rest is discarded. This problem, of course, requires special handling considering the harmful effects to health. On the other hand, the abundance of plastic waste is increasing by 14% or 85 000 tons per year. This problem must be solved due to its film-forming properties. High-density polyethylene (HDPE) is one type of plastic used as a membrane material. Therefore, in this study, HDPE plastic waste was utilized as a membrane for dye removal. In this study, HDPE plastic waste was fabricated via a thermal-induced phase-separation method using mineral oil as a solvent at various concentrations of 8%, 10%, 13%, and 15% (w/w). All the membranes were characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, and contact angle measurements. The results showed that the HDPE membrane at a concentration of 15% displayed the best performance compared to the others in terms of MB rejection. The negative charge (-36.9) of the HDPE membrane was more effective for cationic dye removal compared to the anionic dye. The flux and rejection of HDPE 15% for 100 ppm MB and MO removal were 2.71 and 4.93 L m-2 h-1, and 99.72% and 89.8%, respectively. The pure water flux of the membrane was 15.01 L m-2 h-1 and the tensile strength was 0.3435 MPa.
  12. Saud, Safaa Najah, Muhammad Irsyad Abdullah, Siti Hadijah Shariff, Ram Singh, Ambrick Singh, Baharudin Hamzah, Nordayati Mat Lehat, et al.
    MyJurnal
    Blindness is an area of inadequate the visual conception because of physiological or even neurological aspects. The partial blindness corresponds to the insufficient integration in the expansion of the optic confidence or perhaps visual center of the eye, and also over-all total blindness is the complete inadequacy of the visual light perception. Within this research, a basic, inexpensive, friendly user, sensible blind assist technique is developed to be integrated with the portability of both blind and even visually impaired people in a particular region. The presented work consists of a wearable apparatus is made up of the head hat to facilitate the blind particular person to get around single-handedly safely and securely in order to keep away from any kind of obstructions that could be experienced, even if mounted and also mobile phone, to avoid virtually any probable accident. The primary function of this product is the Ultrasonic sensing unit which is able to inform the blind people if there exist any specific obstacles or otherwise not around them along with the vibrating motor probably would informs the blind people who which negative are the obstacles located. In addition, by pressing the home or work button this system will straight away link to MIT app inventor and the app will send a signal to Google maps to guide the blind people to its desired location. The implemented system is fast, and easy to use and an innovative affordable solution to blind and visually impaired people in third world countries.
  13. Mat-Baharin NH, Razali M, Mohd-Said S, Syarif J, Muchtar A
    J Prosthodont Res, 2020 Oct;64(4):490-497.
    PMID: 32063537 DOI: 10.1016/j.jpor.2020.01.004
    PURPOSE: Not all elements with β-stabilizing properties in titanium alloys are suitable for biomaterial applications, because corrosion and wear processes release the alloying elements to the surrounding tissue. Chromium and molybdenum were selected as the alloying element in this work as to find balance between the strength and modulus of elasticity of β-titanium alloys. This study aimed to investigate the effect of Titanium-10Molybdenum-10Chromium (Ti-10Mo-10Cr), Titanium-10Chromium (Ti-10Cr) and Titanium-10Molybdenum (Ti-10Mo) on the elemental leachability in tissue culture environment and their effect on the viability of human gingival fibroblasts (HGFs).

    METHODS: Each alloy was immersed in growth medium for 0-21 days, and the elution was analyzed to detect the released metals. The elution was further used as the treatment medium and exposed to seeded HGFs overnight. The HGFs were also cultured directly to the titanium alloy for 1, 3 and 7 days. Cell viability was then determined.

    RESULTS: Six metal elements were detected in the immersion of titanium alloys. Among these elements, molybdenum released from Ti-10Mo-10Cr had the highest concentration throughout the immersion period. Significant difference in the viability of fibroblast cells treated with growth medium containing metals and with direct exposure technique was not observed. The duration of immersion did not significantly affect cell viability. Nevertheless, cell viability was significantly affected after 1 and 7 days of exposure, when the cells were grown directly onto the alloy surfaces.

    CONCLUSIONS: Within the limitation of this study, the newly developed β-titanium alloys are non-cytotoxic to human gingival fibroblasts.

  14. Anjum W, Husain AR, Abdul Aziz J, Abbasi MA, Alqaraghuli H
    PLoS One, 2020;15(2):e0228636.
    PMID: 32027697 DOI: 10.1371/journal.pone.0228636
    For closed-loop controlled DC-AC inverter system, the performance is highly influenced by load variations and online current measurement. Any variation in the load will introduce unwanted periodic error at the inverter output voltage. In addition, when the current sensor is in faulty condition, the current measurement will be imprecise and the designed feedback control law will be ineffective. In this paper, a sensorless continuous sliding mode control (SMC) scheme has been proposed to address these issues. The chattering effect due to the discontinuous switching nature of SMC has been attenuated by designing a novel boundary-based saturation function where the selection of the thickness of boundary is dependent to the PWM signal generation of the inverter. In order to remove the dependency on the current sensor, a particle swarm optimization(PSO) based modified observer is proposed to estimate the inductor current in which the observer gains are optimized using PSO by reducing the estimation errors cost function. The proposed dynamic smooth SMC algorithm has been simulated in MATLAB Simulink environment for 0.2-kVA DC-AC inverter and the results exhibit rapid dynamic response with a steady-state error of 0.4V peak-to-peak voltage under linear and nonlinear load perturbations. The total harmonic distortion (THD) is also reduced to 0.20% and 1.14% for linear and non-linear loads, respectively.
  15. Bhuiyan MR, Abdullah DJ, Hashim DN, Farid FA, Uddin DJ, Abdullah N, et al.
    F1000Res, 2021;10:1190.
    PMID: 35136582 DOI: 10.12688/f1000research.73156.2
    BACKGROUND: This paper focuses on advances in crowd control study with an emphasis on high-density crowds, particularly Hajj crowds. Video analysis and visual surveillance have been of increasing importance in order to enhance the safety and security of pilgrimages in Makkah, Saudi Arabia. Hajj is considered to be a particularly distinctive event, with hundreds of thousands of people gathering in a small space, which does not allow a precise analysis of video footage using advanced video and computer vision algorithms. This research proposes an algorithm based on a Convolutional Neural Networks model specifically for Hajj applications. Additionally, the work introduces a system for counting and then estimating the crowd density.

    METHODS: The model adopts an architecture which detects each person in the crowd, spots head location with a bounding box and does the counting in our own novel dataset (HAJJ-Crowd).

    RESULTS: Our algorithm outperforms the state-of-the-art method, and attains a remarkable Mean Absolute Error result of 200 (average of 82.0 improvement) and Mean Square Error of 240 (average of 135.54 improvement).

    CONCLUSIONS: In our new HAJJ-Crowd dataset for evaluation and testing, we have a density map and prediction results of some standard methods.

  16. Alfred R, Ahmad AH, Payne J, Williams C, Ambu LN, How PM, et al.
    PLoS One, 2012;7(2):e31400.
    PMID: 22347469 DOI: 10.1371/journal.pone.0031400
    Home range is defined as the extent and location of the area covered annually by a wild animal in its natural habitat. Studies of African and Indian elephants in landscapes of largely open habitats have indicated that the sizes of the home range are determined not only by the food supplies and seasonal changes, but also by numerous other factors including availability of water sources, habitat loss and the existence of man-made barriers. The home range size for the Bornean elephant had never been investigated before.
  17. Rovie-Ryan JJ, Zainuddin ZZ, Marni W, Ahmad AH, Ambu LN, Payne J
    Asian Pac J Trop Biomed, 2013 Feb;3(2):95-9.
    PMID: 23593586 DOI: 10.1016/S2221-1691(13)60031-3
    To demonstrate a noninvasive large mammalian genetic sampling method using blood meal obtained from a tabanid fly.
  18. Arbain D, Sinaga LMR, Taher M, Susanti D, Zakaria ZA, Khotib J
    Front Pharmacol, 2022;13:849704.
    PMID: 35685633 DOI: 10.3389/fphar.2022.849704
    The genus Alocasia (Schott) G. Don consists of 113 species distributed across Asia, Southeast Asia, and Australia. Alocasia plants grow in tropical and subtropical forests with humid lowlands. Featuring their large green heart-shaped or arrow-shaped ear leaves and occasionally red-orange fruit, they are very popular ornamental plants and are widely used as traditional medicines to treat various diseases such as jaundice, snake bite, boils, and diabetes. This manuscript critically analysed the distribution, traditional uses, and phytochemical contents of 96 species of Alocasia. The numerous biological activities of Alocasia species were also presented, which include anti-cancer, antidiabetic and antihyperglycaemic, antioxidant, antidiarrhoea, antimicrobial and antifungal, antiparasitic (antiprotozoal and anthelminthic), antinociceptive and anti-inflammatory, brine shrimp lethality, hepatoprotective, anti-hemagglutinin, anti-constipation and diuretic, and radioprotective activities as well as acute toxicity studies. Research articles were acquired by the accessing three scientific databases comprising PubMed, Scopus, and Google Scholar. For this review, specific information was obtained using the general search term "Alocasia", followed by the "plant species names" and "phytochemical" or "bioactivity" or "pharmacological activity". The accepted authority of the plant species was referred from theplantlist.org. Scientific studies have revealed that the genus is mainly scattered throughout Asia. It has broad traditional benefits, which have been associated with various biological properties such as cytotoxic, antihyperglycaemic, antimicrobial, and anti-inflammatory. Alocasia species exhibit diverse biological activities that are very useful for medical treatment. The genus Alocasia was reported to be able to produce a strong and high-quality anti-cancer compound, namely alocasgenoside B, although information on this compound is currently limited. Therefore, it is strongly recommended to further explore the relevant use of natural compounds present in the genus Alocasia, particularly as an anti-cancer agent. With only a few Alocasia species that have been scientifically studied so far, more attention and effort is required to establish the link between traditional uses, active compounds, and pharmacological activities of various species of this genus.
  19. Abrar SS, Norsa'adah B, Yahya MM, Isa JA, Zon EM
    Obstet Gynecol Sci, 2024 Jan;67(1):76-85.
    PMID: 37985950 DOI: 10.5468/ogs.23151
    OBJECTIVE: Pregnancy-associated breast cancer (PABC) is a rare cancer. This study aimed to determine the survival probabilities and prognostic factors in patients with PABC.

    METHODS: A retrospective cohort study was conducted in two tertiary care hospitals in Kota Bharu. We included all patients with breast cancer who were diagnosed by histopathology while pregnant or within 2 years post-partum from 2001 through 2020. We matched patients with PABC to non-pregnant patients with breast cancer by age and year of diagnosis. The data were analyzed using Cox proportional hazard regression.

    RESULTS: A total of 35 cases of PABC and 70 non-PABC controls were recruited. The 3-year, 5-year, and 10-year survival probabilities for patients with PABC were 58.6%, 47.54%, and 38.03%, respectively. The patients with PABC had a non-significant difference in survival probabilities compared with non-PABC patients. The significant prognostic factors of PABC were age (adjusted hazard ratio [aHR], 0.91; 95% confidence interval [CI], 0.86-0.96; P=0.001), advanced stage of cancer (aHR, 9.97; 95% CI, 3.96-25.2; P<0.001), and no surgery (aHR, 3.16; 95% CI, 1.01-9.85; P=0.047). Pregnancy was not found to be an independent factor in the prognosis of PABC (aHR, 0.72; 95% CI, 0.39-1.28; P=0.266).

    CONCLUSION: Women diagnosed with PABC had similar survival probabilities compared with non-PABC patients. Pregnancy was not an independent prognostic factor for breast cancer. This information can be useful when women with breast cancer are counseled and supported with the option of beginning treatment with pregnancy continuation.

  20. Rai NA, Abdul Aziz MJ, Sahid MR, Husain AR, Anjum W, Low WY
    PLoS One, 2023;18(10):e0291873.
    PMID: 37847692 DOI: 10.1371/journal.pone.0291873
    This paper proposes an average current mode controller (ACMC) for a single-phase bridgeless power factor correction (PFC) circuit using a single ended primary inductor converter (SEPIC) via second-order model reduction. The superiority of the proposed controller is PFC accomplished at power up to 350 W with high efficiency via the second-order model reduction. The design and implementation of ACMC on the converter operated with continuous conduction mode (CCM) is explained in detail. ACMC forces input current to follow sinusoidal current reference at different power levels and sustain high power factor (PF). The proposed controller is designed based on the theoretical analysis operation of the circuit. For verification, MATLAB/Simulink simulations are carried out and validation through an experiment test rig for 110-220 Vrms input, 100 Vdc/ 350 W output prototype at 20 kHz switching frequency. It is proven that the proposed controller strategy accomplishes high PF, high efficiency and conformity with the simulation.
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links