MyMedR

Displaying publications 21 - 40 of 216 in total

Abstract:

Sort:

Replacement of animal fat with fractionated and partially hydrogenated palm oil in beef burgers

Babji AS, Alina AR, Seri Chempaka MY, Sharmini T, Basker R, Yap SL

Int J Food Sci Nutr, 1998 Sep;49(5):327-32.
PMID: 10367001

Four formulations of burgers, prepared with 65% lean meat and 15% fat consisting of RBD palm stearin (PS), Socfat 4000P and Socfat 4100P and beef fat (BF) as control were evaluated for solid fat content (SFC), slip melting point (SMP), cooking loss, proximate analysis (moisture, fat and protein), colour, i.e. lightness ('L'), redness ('a') and yellowness ('b'), free fatty acid (FFA), iodine value (IV), thiobarbituric acid (TBA) and texture profile analysis (TPA). Sensory evaluation was carried out for texture, juiciness, aroma, oiliness and overall acceptance. SFC and SMP for raw and cooked SF4000P beef burgers were closest to BF control burgers, falling into the range of 35-40 degrees C. Cooking loss was highest for PS burgers, there were no significant differences (P > 0.05) amongst BF, SF4000P and SF4100P burgers. Proximate analysis on raw burgers showed SF4000P to contain high fat and lowest moisture contents. Objective textural measurements using texture profile analysis (TPA) for all cooked burgers showed no significant differences (P > 0.05) for springiness and cohesiveness. Variation of values among the formulations for hardness, gumminess and chewiness are explained by the differences of SFC for beef burgers with various types of fats. Raw and cooked PS burgers have the lightest 'L' values compared with other fat-substituted burgers while BF, SF4000P and SF4100P indicated no significant differences (P > 0.05) for 'L', 'a' and 'b' values. Beef fat showed the highest amount of free fatty acids (FFA) compared to palm oil samples. For the iodine value (IV), SF4000P showed the highest value which means that it contained the highest level of unsaturated fatty acids followed by PS, BF and SF4100P successively. SF4000P had the highest TBA values followed successively by BF, PS and SF4100P. For sensory evaluation, PS burgers had the least oily taste. This may be due to its high cooking loss. Taste panelists could not differentiate burgers with substituted vegetable fats against the control burgers.

Matched MeSH terms: Food Handling
Quality of mechanically deboned chicken meat frankfurter incorporated with chicken skin

Babji AS, Chin SY, Seri Chempaka MY, Alina AR

Int J Food Sci Nutr, 1998 Sep;49(5):319-26.
PMID: 10367000

Four formulations were processed into frankfurters with different ratios of mechanically deboned chicken meat (MDCM) and cooked chicken skin (CCS) i.e. 80/0, 70/10, 60/20 and 50/30. The products were evaluated for proximate composition, cholesterol content, colour; 'L' value (lightness) and 'a' value (redness), percentage of cooking loss, physical measurements (shearforce-kgf and folding test), thiobarbituric acid value (TBA) and taste panel evaluation. The increment of CCS in the frankfurters increased the contents of moisture, ash, protein, fat, cholesterol, the lightness ('L' value) and redness ('a' value). After 3 months of frozen storage, the increment continued except for the moisture contents for formulations with 20 and 30% CCS. The lipid oxidation (TBA value) and cooking loss were lowered in formulations with CCS. After 3 months of frozen storage, TBA value decreased, while the cooking loss increased for all the formulations. The addition of CCS increased hardness of the frankfurters but affected folding ability, with formulation with 10% CCS scoring better grade. Sensory evaluation was carried out using 30 untrained panelists to evaluate aroma, colour, appearance, hardness, juiciness, chicken taste, oily taste, rancid taste and overall acceptance of the products. The addition of CCS in the frankfurters at 10 and 20% resulted in products with taste and texture that were acceptable after 3 months of frozen storage.

Matched MeSH terms: Food Handling
Sonication improves kasturi lime (Citrus microcarpa) juice quality

Bhat R, Kamaruddin NS, Min-Tze L, Karim AA

Ultrason Sonochem, 2011 Nov;18(6):1295-300.
PMID: 21550834 DOI: 10.1016/j.ultsonch.2011.04.002

Freshly squeezed kasturi lime fruit juice was sonicated (for 0, 30 and 60min at 20°C, 25kHz frequency) to evaluate its impact on selected physico-chemical and antioxidant properties, such as pH, °Brix, titratable acidity, Hunter color values (L(∗), a(∗), b(∗)), ascorbic acid, DPPH radical scavenging activity, total phenolics, antioxidant capacity, flavonoids and flavonols. Additionally, the effect of sonication treatments on the microbial load (TPC, yeast and mold) were also evaluated. Sonication of juice samples for 60min showed enhancement in most of the bioactive compounds compared to samples treated for 30min and control samples (untreated). Significant reductions in the microbial load corresponding to sonication time were also recorded. Results of the present study indicate that sonication may be employed as a suitable technique for kasturi lime juice processing, where antioxidant and other bioactive compound retention or enhancement is desired, along with the achievement of safety and quality standards.

Matched MeSH terms: Food Handling/methods*
Norovirus cross-contamination during food handling and interruption of virus transfer by hand antisepsis: experiments with feline calicivirus as a surrogate

Bidawid S, Malik N, Adegbunrin O, Sattar SA, Farber JM

J Food Prot, 2004 Jan;67(1):103-9.
PMID: 14717359

While there is good epidemiological evidence for foods as vehicles for norovirus transmission, the precise means of spread and its control remain unknown. The feline calicivirus was used as a surrogate for noroviruses to study infectious virus transfer between hands and selected types of foods and environmental surfaces. Assessment of the potential of selected topicals in interrupting such virus transfer was also made. Ten microliters of inoculum of feline calicivirus deposited onto each fingerpad of adult subjects was allowed to air dry and the contaminated area on individual fingerpads was pressed (10 s at a pressure of 0.2 to 0.4 kg/cm2) onto 1-cm-diameter disks of ham, lettuce, or brushed stainless steel. The virus remaining on the donor and that transferred to the recipient surfaces was eluted and plaque assayed. Virus transfer to clean hands from experimentally contaminated disks of ham, lettuce, and stainless steel was also tested. Nearly 46 +/- 20.3, 18 +/- 5.7, and 13 +/- 3.6% of infectious virus was transferred from contaminated fingerpads to ham, lettuce, and metal disks, respectively. In contrast, approximately 6 +/- 1.8, 14 +/- 3.5, and 7 +/- 1.9% virus transfer occurred, respectively, from ham, lettuce, and metal disks to hands. One-way analysis of variance test showed that pretreatment (washing) of the fingerpads either with water or with both topical agent and water significantly (P < 0.05) reduced virus transfer to < or = 0.9%, as compared with < or = 2.3 and < or = 3.4% transfer following treatments with either 75% (vol/vol) ethanol or a commercial hand gel containing 62% ethanol, respectively. Despite wide variations in virus transfer among the targeted items used, intervention agents tested reduced virus transfer significantly (P < 0.05) when compared with that without such treatments (71 +/- 8.9%). These findings should help in a better assessment of the potential for cross-contamination of foods during handling and also assist in developing more effective approaches to foodborne spread of norovirus infections.

Matched MeSH terms: Food Handling/methods*
Contamination of foods by food handlers: experiments on hepatitis A virus transfer to food and its interruption

Bidawid S, Farber JM, Sattar SA

Appl Environ Microbiol, 2000 Jul;66(7):2759-63.
PMID: 10877765

Hepatitis A virus (HAV) is an important pathogen which has been responsible for many food-borne outbreaks. HAV-excreting food handlers, especially those with poor hygienic practices, can contaminate the foods which they handle. Consumption of such foods without further processing has been known to result in cases of infectious hepatitis. Since quantitative data on virus transfer during contact of hands with foods is not available, we investigated the transfer of HAV from artificially contaminated fingerpads of adult volunteers to pieces of fresh lettuce. Touching the lettuce with artificially contaminated fingerpads for 10 s at a pressure of 0.2 to 0.4 kg/cm(2) resulted in transfer of 9.2% +/- 0.9% of the infectious virus. The pretreatments tested to interrupt virus transfer from contaminated fingerpads included (i) hard-water rinsing and towel drying, (ii) application of a domestic or commercial topical agent followed by water rinsing and towel drying, and (iii) exposure to a hand gel containing 62% ethanol or 75% liquid ethanol without water rinsing or towel drying. When the fingerpads were treated with the topical agents or alcohol before the lettuce was touched, the amount of infectious virus transferred to lettuce was reduced from 9.2% to between 0.3 and 0.6% (depending on the topical agent used), which was a reduction in virus transfer of up to 30-fold. Surprisingly, no virus transfer to lettuce was detected when the fingerpads were rinsed with water alone before the lettuce was touched. However, additional experiments with water rinsing in which smaller volumes of water were used (1 ml instead of 15 ml) showed that the rate of virus transfer to lettuce was 0.3% +/- 0.1%. The variability in virus transfer rates following water rinsing may indicate that the volume of water at least in part influences virus removal from the fingerpads differently, a possibility which should be investigated further. This study provided novel information concerning the rate of virus transfer to foods and a model for investigating the transfer of viral and other food-borne pathogens from contaminated hands to foods, as well as techniques for interrupting such transfer to improve food safety.

Matched MeSH terms: Food Handling*
A two-step method of cyclolinopeptide (linusorb) preparation from flaxseed cake via dry-screening

Cai ZZ, Xu CX, Song ZL, Li JL, Zhang N, Zhao JH, et al.

Food Chem, 2024 Aug 15;449:139243.
PMID: 38608605 DOI: 10.1016/j.foodchem.2024.139243

Linusorbs (LO), cyclolinopeptides, are a group of cyclic hydrophobic peptides and considered a valuable by-product of flaxseed oil due to numerous health benefits. Currently applied acetone or methanol extraction could contaminate the feedstocks for further food-grade application. Using flaxseed cake as feedstock, this study established a practical method for preparing LO from pressed cake. Firstly, LO composition of 15 flaxseed cultivars was analyzed. Next, cold-pressed cake was milled and screened mechanically. The kernel and hull fractions were separated based on the disparity of their mechanical strength. Monitored by hyperspectral fluorescence, the LO-enriched kernel fraction separated from cold-pressed flaxseed cake was further used as feedstock for LO production. After ethanol extraction, partition, and precipitation, LOs were extracted from cold-pressed flaxseed cake with a purity of 91.4%. The proposed method could serve as feasible flaxseed cake valorization strategy and enable the preparation of other polar compounds such as flax lignan and mucilage.

Matched MeSH terms: Food Handling
A study of the incidence of Vibrio parahaemolyticus in Malaysian shrimp undergoing processing for export

Cann DC, Taylor LY, Merican Z

J Hyg (Lond), 1981 Dec;87(3):485-91.
PMID: 7310127

The incidence of Vibrio parahaemolyticus in products of the Malaysian export shrimp processing industry was investigated through the stages from the catch to that of the cooked, peeled and frozen product. The organism was commonly found in freshly caught and landed shrimp, and could be detected by enrichment culture at all stages of processing. The number of V. parahaemolyticus in shrimp varied from nil to 4x10(4), and 19 of the 50 serotypes in the current antigenic scheme were found, O1-K38 and O1-K32 occurring most often. All the isolates were Kanagawa-negative; one strain was a sucrose-positive variant. The study indicated that specifications of 10(2) g-1 for V. parahaemolyticus in raw tropical shellfish are too stringent but that the Malaysian shrimp industry should be able to meet this requirement for cooked shrimp.

Matched MeSH terms: Food Handling
Physicochemical properties and toxicity of cocoa powder-like product from roasted seeds of fermented rambutan (Nephelium lappaceum L.) fruit

Chai KF, Chang LS, Adzahan NM, Karim R, Rukayadi Y, Ghazali HM

Food Chem, 2019 Jan 15;271:298-308.
PMID: 30236681 DOI: 10.1016/j.foodchem.2018.07.155

A novel way to fully utilize rambutan fruit and seed is to ferment peeled fruits followed by drying and roasting, and use the seeds to produce seed powder similar to that of cocoa powder. Hence, the objective of this study was to optimize the roasting time and temperature of rambutan fruit post-fermentation and drying, and to produce a cocoa-like powder product from the seeds. Parameters monitored during roasting were colour and total phenolic content, while seed powder obtained using optimized roasting conditions was analyzed for its physicochemical properties and toxicity. The latter was examined using the brine shrimp lethality assay. Results showed that the roasted seed powder possessed colour and key volatile compounds similar to that of cocoa powder. Besides, the brine shrimp lethality assay indicated that the roasted seed powder was non-toxic. Thus, the fruit, including its seed could be fully utilized and subsequently, wastage could be reduced.

Matched MeSH terms: Food Handling/methods*
Fat properties and antinutrient content of rambutan (Nephelium lappaceum L.) seed during solid-state fermentation of rambutan fruit

Chai KF, Adzahan NM, Karim R, Rukayadi Y, Ghazali HM

Food Chem, 2019 Feb 15;274:808-815.
PMID: 30373014 DOI: 10.1016/j.foodchem.2018.09.065

Rambutan seed is usually discarded during fruit processing. However, the seed contains a considerable amount of crude fat. Hence, the objective of this study was to investigate the fat properties and antinutrient content of the seed during fermentation of rambutan fruit. Results showed that the crude fat content of the seed reduced by 22% while its free fatty acid content increased by 4.3 folds after 10 days of fermentation. Arachidic acid was selectively reduced and was replaced by linoleic acid from the seventh day of fermentation onwards. Only 14.5% of triacylglycerol remained in the seed fat at the end of fermentation. The complete melting temperature, crystallization onset temperature and solid fat index at 37 °C of the fermented seed fat were higher than that of non-fermented seed fat. The saponin and tannin contents of the seed were reduced by 67% and 47%, respectively, after fermentation.

Matched MeSH terms: Food Handling/methods*
Simulation of cross-contamination and decontamination of Campylobacter jejuni during handling of contaminated raw vegetables in a domestic kitchen

Chai LC, Lee HY, Ghazali FM, Abu Bakar F, Malakar PK, Nishibuchi M, et al.

J Food Prot, 2008 Dec;71(12):2448-52.
PMID: 19244897

Campylobacter jejuni was found to occur at high prevalence in the raw salad vegetables examined. Previous reports describe cross-contamination involving meat; here we investigated the occurrence of cross-contamination and decontamination events in the domestic kitchen via C. jejuni-contaminated vegetables during salad preparation. This is the first report concerning quantitative cross-contamination and decontamination involving naturally contaminated produce. The study was designed to simulate the real preparation of salad in a household kitchen, starting with washing the vegetables in tap water, then cutting the vegetables on a cutting board, followed by slicing cucumber and blanching (heating in hot water) the vegetables in 85 degrees C water. Vegetables naturally contaminated with C. jejuni were used throughout the simulation to attain realistic quantitative data. The mean of the percent transfer rates for C. jejuni from vegetable to wash water was 30.1 to 38.2%; from wash water to cucumber, it was 26.3 to 47.2%; from vegetables to cutting board, it was 1.6 to 10.3%; and from cutting board to cucumber, it was 22.6 to 73.3%. The data suggest the wash water and plastic cutting board as potential risk factors in C. jejuni transmission to consumers. Washing of the vegetables with tap water caused a 0.4-log reduction of C. jejuni attached to the vegetables (most probable number/gram), while rapid blanching reduced the number of C. jejuni organisms to an undetectable level.

Matched MeSH terms: Food Handling/methods*
Production of ‘kedondong’ (Spondias cytherea Sonnerat) powder as affected by different drying methods

Chang LS, Lau KQ, Tan CP, Yusof YA, Nyam KL, Pui LP

Acta Sci Pol Technol Aliment, 2021 11 2;20(4):417-421.
PMID: 34724366 DOI: 10.17306/J.AFS.0903

BACKGROUND: ‘Kedondong’ fruit is regarded as an exotic fruit that is gaining popularity due to its deliciousness and pleasant flavour. However, this fruit has a short shelf life, leading to problems with postharvest loss. In order to prevent losses, the fruit could be produced as a value-added product. In this study, the ‘kedondong’ fruit was preserved by drying into powder using different drying methods.
METHODS: The kedondong powder was dried using five methods: convection oven drying, vacuum drying, spray drying, drum drying and freeze drying. The physical properties, flowability and DPPH radical scavenging ability of dried kedondong powder were examined.
RESULTS: Spray-dried powder provided the significantly (p ≤ 0.05) highest process yield, which was 54.93%. All the powder produced had a low moisture content (3.03 to 5.66%) and water activity (0.19–0.37). Visually, whitish and fine powders were observed on spray-dried and freeze-dried samples, while convection oven-dried and vacuum-dried powder appeared yellowish and coarse. The pH of the reconstituted powders varied from 2.71 to 2.83, where drum-dried powder was the most acidic. Spray-dried powder showed the highest wettability and shortest dissolution time, which was 172.65 s and 10.55 s, respectively. With the exception of drum-dried powder, all the dried powders were classified as non-caking powders. The bulk and tapped density of the powders ranged from 0.32 to 0.70 g/mL and 0.38 to 0.86 g/mL, respectively. Vacuum-dried powder had very good flowability, convection oven-dried and drum-dried powder had good flowability, while spray-dried and drum-dried powder had fair flowability. Antioxidant assay showed that freeze-dried powder exhibited the highest free radical scavenging activity (IC50 = 701.29 μg/mL).
CONCLUSIONS: This study indicates that spray-dried kedondong powder has great potential in the food industry due to its high process yield and better powder quality. Meanwhile, freeze drying best preserved the antioxidant properties of the powder, which could potentially be used as a functional ingredient as a result. This study is important for the fruit processing industry as it offers an alternative for the farmer to produce kedondong fruit powder because the fruit has a short shelf life. Converting the fruit into powder can diversify the resulting produce into different applications, such as fruit juice, beverages, jam and other food products.

Matched MeSH terms: Food Handling*
Making use of guava seed (Psidium guajava L): the effects of pre-treatments on its chemical composition

Chang YP, Tan MP, Lok WL, Pakianathan S, Supramaniam Y

Plant Foods Hum Nutr, 2014 Mar;69(1):43-9.
PMID: 24292972 DOI: 10.1007/s11130-013-0396-3

The guava processing industry in Malaysia produces by-products in the form of seed core and peel. These by-products can be regarded as underused resources but there are concerns about their composition that prevent their use in the food and feed industries. This study aims to analyze the respective effects of heat treatments (boiling or autoclaving) and germination periods on the nutritional composition and phytochemical content of guava seeds. The guava seeds were found to contain 618, 78, 72, and 5 mg/g dry weight total dietary fiber, fat, protein, and ash, respectively. The tannin and saponin contents, but not the phytic acid content, were below the respective anti-nutritional thresholds. The heat treatments did not affect the total dietary fiber and ash contents but reduced all other chemical components to different extents (15-91%). Boiling did not reduce the phytic acid content substantially but autoclaving caused a reduction of 91% to a level below the anti-nutritional threshold. Germination for 14 days caused a significant reduction in nutrient contents in the range of 16-79%. Germination also reduced the phytic acid content by 90% in the seed but did not significantly affect the saponin content. Thus, guava seed can be treated thermally or germinated to manipulate its chemical composition to enable its use in the food and feed industries.

Matched MeSH terms: Food Handling*
Antioxidative/Antimicrobial effects of galangal and alpha-tocopherol in minced beef

Cheah PB, Gan SP

J Food Prot, 2000 Mar;63(3):404-7.
PMID: 10716573

The antioxidant and microbial stabilities of galangal (Alpinia galanga) extract in raw minced beef were examined at 4 +/- 1 degree C. Raw minced beef containing galangal extracts (0 to 0.10%, wt/wt) were prepared. Lipid oxidation during refrigerated storage was assessed by monitoring malonaldehyde formation, using the thiobarbituric acid reactive substances method. In minced beef, added galangal extract improved oxidative stability. Galangal extract at higher concentrations of 0.05% and 0.10% (wt/wt) were also found to extend the shelf-life of minced beef. Addition of alpha-tocopherol (0.02%, wt/wt) to galangal extract (0.05%, wt/wt) were observed to increase the oxidative but not the microbial stability of minced beef during the storage of 7 days. Galangal extract may prove useful in inhibiting lipid oxidation and increasing microbial stability of minced meat.

Matched MeSH terms: Food Handling
Ecological factors influencing the growth of the child

Chen PC

Med J Malaysia, 1979 Sep;34(1):6-12.
PMID: 542155
Matched MeSH terms: Food Handling
Emulsifying conditions and processing parameters optimisation of kenaf seed oil-in-water nanoemulsions stabilised by ternary emulsifier mixtures

Cheong AM, Tan CP, Nyam KL

Food Sci Technol Int, 2018 Jul;24(5):404-413.
PMID: 29466882 DOI: 10.1177/1082013218760882

Kenaf ( Hibiscus cannabinus L.) seed oil has been proven for its multi-pharmacological benefits; however, its poor water solubility and stability have limited its industrial applications. This study was aimed to further improve the stability of pre-developed kenaf seed oil-in-water nanoemulsions by using food-grade ternary emulsifiers. The effects of emulsifier concentration (1, 5, 10, 15% w/w), homogenisation pressure (16,000, 22,000, 28,000 psi), and homogenisation cycles (three, four, five cycles) were studied to produce high stability of kenaf seed oil-in-water nanoemulsions using high pressure homogeniser. Generally, results showed that the emulsifier concentration and homogenisation conditions had great effect ( p food and nutraceutical industries.

Matched MeSH terms: Food Handling/methods
Physicochemical, textural and viscoelastic properties of palm diacylglycerol bakery shortening during storage

Cheong LZ, Tan CP, Long K, Affandi Yusoff MS, Lai OM

J Sci Food Agric, 2010 Oct;90(13):2310-7.
PMID: 20661900 DOI: 10.1002/jsfa.4088

Diacylglycerol (DAG), which has health-enhancing properties, is sometimes added to bakery shortening to produce baked products with enhanced physical functionality. Nevertheless, the quantity present is often too little to exert any positive healthful effects. This research aimed to produce bakery shortenings containing significant amounts of palm diacyglycerol (PDG). Physicochemical, textural and viscoelastic properties of the PDG bakery shortenings during 3 months storage were evaluated and compared with those of commercial bakery shortening (CS).

Matched MeSH terms: Food Handling*
Cold-pressed rapeseed (Brassica napus) oil: Chemistry and functionality

Chew SC

Food Res Int, 2020 05;131:108997.
PMID: 32247493 DOI: 10.1016/j.foodres.2020.108997

Rapeseed oil is the second most abundant produced edible oil in the world with low erucic acid and low glucosinolate. Thus, the quality of rapeseed oil had attracted global attention. Cold-pressed rapeseed oil appeared to be a preferred choice than refined oil as no solvent and less processing involved in the cold-pressing. The methods of cold-pressing and microwave pre-treatment on the extraction yield and bioactive compounds of rapeseed oil have been reviewed in this paper. Cold-pressed rapeseed oil offers health benefits due to its preserved fatty acid profile and bioactive compounds. High phenolic compounds, tocopherols, phytosterols, and carotenoids contents in the cold-pressed rapeseed oil offer health benefits like regulating blood lipid profile, insulin sensitivity, and glycemic control, as well as offer antioxidant and cytotoxic activity. Besides using as edible oil, cold-pressed rapeseed oil find applications in animal feed, chemical, and fuel.

Matched MeSH terms: Food Handling
Optimization of Bleaching Parameters in Refining Process of Kenaf Seed Oil with a Central Composite Design Model

Chew SC, Tan CP, Nyam KL

J Food Sci, 2017 Jul;82(7):1622-1630.
PMID: 28608553 DOI: 10.1111/1750-3841.13758

Kenaf seed oil has been suggested to be used as nutritious edible oil due to its unique fatty acid composition and nutritional value. The objective of this study was to optimize the bleaching parameters of the chemical refining process for kenaf seed oil, namely concentration of bleaching earth (0.5 to 2.5% w/w), temperature (30 to 110 °C) and time (5 to 65 min) based on the responses of total oxidation value (TOTOX) and color reduction using response surface methodology. The results indicated that the corresponding response surface models were highly statistical significant (P < 0.0001) and sufficient to describe and predict TOTOX value and color reduction with R2 of 0.9713 and 0.9388, respectively. The optimal parameters in the bleaching stage of kenaf seed oil were: 1.5% w/w of the concentration of bleaching earth, temperature of 70 °C, and time of 40 min. These optimum parameters produced bleached kenaf seed oil with TOTOX value of 8.09 and color reduction of 32.95%. There were no significant differences (P > 0.05) between experimental and predicted values, indicating the adequacy of the fitted models.

Matched MeSH terms: Food Handling
Assessing the Performance of a Real-Time Total Adenylate (ATP+ADP+AMP) Detection Assay for Surface Hygiene Monitoring in Food Manufacturing Plants and Commercial Kitchens

Ching CL, Kamaruddin A, Rajangan CS

J Food Prot, 2021 Jun 01;84(6):973-983.
PMID: 33232455 DOI: 10.4315/JFP-20-294

ABSTRACT: Environmental hygiene monitoring in the food processing environment has become important in current food safety programs to ensure safe food production. However, conventional monitoring of surface hygiene based on visual inspection and microbial counts is slow, tedious, and thus unable to support the current risk-based management system. Therefore, this study was conducted to assess the performance of a real-time total adenylate assay that detected ATP+ADP+AMP (A3) for food contact surface hygiene in 13 food processing plants and two commercial kitchens in Malaysia. The A3 value was compared with the microbial count (aerobic plate count [APC]) on food contact surfaces. Receiver-operating characteristic (ROC) analysis was performed to assess the reliability of the data and to determine the optimal threshold value for hygiene indication of food contact surfaces. Overall, the A3 value demonstrated a weak positive relationship with APC. However, the A3 value significantly correlated with APC for food processing environments associated with raw meat and raw food ingredients such as fruit that harbor a high microbial load. ROC analysis suggested an optimal threshold for the A3 value of 500 relative light units to balance the sensitivity and specificity at 0.728 and 0.719, respectively. The A3 assay as a hygiene indicator for food contact surfaces had an efficiency of 72.1%, indicating its reliability as a general hygiene indicator.

Matched MeSH terms: Food Handling
Fulltext The impact of four processing methods on trypsin-, chymotrypsin- and alpha-amylase inhibitors present in underutilised legumes

Choi WC, Parr T, Lim YS

J Food Sci Technol, 2019 Jan;56(1):281-289.
PMID: 30728570 DOI: 10.1007/s13197-018-3488-0

The global trend in increasing plant-based protein diets due to health and ideological reasons, has created an increased demand for food legumes that exceeds current production. To meet this demand, it is timely to reduce relying solely on soybean, and explore the potential of the underutilised legumes that are cultivated regionally. Underutilised legumes are rich in protein, carbohydrates and other nutrients that are essential for consumer. However, relatively little is known about their anti-nutritional properties and processing methods. Anti-nutritional factors (ANFs) such as enzyme inhibitors are prevalent in legumes and may interfere with digestibility and nutrient absorption. Nevertheless, an optimised food processing method will overcome this challenge and warrant a safe inclusion of legume in plant-based protein diets. Hence current study aimed to optimise the food processing methods (soaking, wet heating, autoclaving and freezing) and evaluate their efficiency in eliminating the enzyme inhibitors [trypsin, chymotrypsin (CIA) and α-amylase (AIA) inhibitors] present in seven underutilised legumes. Current study showed that autoclaving at 121 °C for 15 min reduced the AIA in all underutilised legumes tested. The AIA and CIA of bambara groundnut were successfully inactivated by wet heating at 50 °C for 60 min, and by autoclaving at 121 °C for 15 min. While the CIA of chickpea was successfully inactivated by freezing at - 80 °C for 24 h.

Matched MeSH terms: Food Handling

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links