MyMedR

Displaying publications 21 - 34 of 34 in total

Abstract:

Sort:

Fulltext Development and Characterization of Biodegradable Composite Films Based on Gelatin Derived from Beef, Pork and Fish Sources

Nur Hanani ZA, Beatty E, Roos YH, Morris MA, Kerry JP

Foods, 2013 Jan 02;2(1):1-17.
PMID: 28239092 DOI: 10.3390/foods2010001

The objectives of this study were to develop composite films using various gelatin sources with corn oil (CO) incorporation (55.18%) and to investigate the mechanical and physical properties of these films as potential packaging films. There were increases (p < 0.05) in the tensile strength (TS) and puncture strength (PS) of films when the concentration of gelatin increased. The mechanical properties of these films were also improved when compared with films produced without CO. Conversely, the water barrier properties of composite films decreased (p < 0.05) when the concentration of gelatin in composite films increased. Comparing with pure gelatin films, water and oxygen barrier properties of gelatin films decreased when manufactured with the inclusion of CO.

Matched MeSH terms: Product Packaging
Fulltext Consumer’s preferences for eggs attributes in Malaysia: Evidence from conjoint survey

Ahmad Hanis, I.A.H., Mad Nasir, S., Jinap, S., Alias, R., Ab Karim, M.S.

International Food Research Journal, 2013;20(5):2865-2872.
MyJurnal

As Malaysian economies grow, Malaysian per capita income is likely to increase. From economics point of view, it is expected that better-off consumers will move to better quality of food attributes such as freshness, food safety, quality and healthfulness in their food intake. This study aimed to investigate the demand for eggs attributes by Malaysian consumers. The study considers the conjoint analysis technique as a method for acquiring insights into preferences for eggs product. The technique was applied to establish the trade-offs that Malaysian consumers make between size, colour, size of packaging, functional attribute and price in the purchasing of eggs for 202 respondents. Least squares regression was utilized to estimate the relative importance of attributes for eggs. The results revealed that the ideal characteristic of egg was one with large size (grade A), omega eggs, brown, and ten per packs. We also found that consumers were also willing to pay more for their preferred attributes. The results found in the study provide valuable inputs to producers or marketers to improve their marketing efforts as well as market positioning, in line with the demanded eggs attributes.

Matched MeSH terms: Product Packaging
Nutritional composition and sensory properties of oyster mushroom-based patties packed with biodegradable packaging

Wan Rosli W, Solihah M

Sains Malaysiana, 2014;43:65-71.

The increase use of synthetic packaging films in food products has led to serious environmental problems due to their total non-biodegradability property. Nutrient composition and sensory acceptability of chicken patties formulated with various levels of Pleurotus sajor-caju popularly known as grey oyster mushroom (oM) and wrapped with degradable plastic were studied. The chicken patties were formulated with either 0, 25 or 50% of fresh oM. The results showed that chicken patty formulated with 25% PSC has protein content of 17.46% lower than the control patty which had 18.13% but it was not significant (p>0.05). After storage, cooked chicken patty formulated with 25% oM had protein content of 21.53% lower than the control patty (23 .90%) but it was not significant (p>0 .05). However, incorporation of oM in chicken patties resulted in decreasing of fat content significantly (p0 .05) from 15.58 (control) to 13.33% after storage. On the other nutrient, the concentration of f3-glucan were detected at values ranged between 0.70 and 0.76 (g1100 g) after 6 month. Other results showed that patty formulated with 25% oM received the highest scores for all attributes except for aroma. Meanwhile, patty prepared with 50% oM received the highest score of aroma attribute after 6 month of storage. However, the score values for all attributes of all oM-based patties were not statistically different with control patty (p> 0.05). In conclusion, the addition of oM at 25% can be recommended for the purpose of lowering fat content while keeping protein and f3-glucan unchanged without jeopardizing sensorial properties. This investigation therefore, suggested that biodegradable plastic can be used in packing any type of processed meat-based products.

Matched MeSH terms: Product Packaging
Fulltext Application of artificial neural networks for the optimisation of wetting contact angle for lead free Bi-Ag soldering alloys

Nima Ghamarian, Azmah Hanim, M.A., Nahavandi, M., Zulkarnain Zainal, Lim, Hong Ngee

Pertanika Journal of Science & Technology, 2017;25(4):1255-1260.
MyJurnal

In the recent years, electronic packaging provides significant research and development challenges
across multiple disciplines such as performance, materials, reliability, thermals and interconnections.
New technologies and techniques frequently adopted can be implemented in soldering alloys of
semiconductor sectors in terms of optimisation. Wetting contact angle or wettability of solder alloys
is one of the important factors which has got the attention of scholars. Hence in this study, due to the
remarkable similarity over classical solder alloys (Pb-Sn), Bi-Ag solder was investigated. Data were
collected through the effects of aging time variation and different weight percentages of Ag in solder
alloys. The contact angle of the alloys with Cu plate was measured by optical microscopy. Artificial
neural networks (ANNs) were applied on the measured datasets to develop a numerical model for further
simulation. Results of the experiments and simulations showed that the coefficient of determination (R2
)
is around 0.97, which signifies that the ANN set up is appropriate for the evaluation.

Matched MeSH terms: Product Packaging
Health warning messages on tobacco products: a review

Hammond D

Tob Control, 2011 Sep;20(5):327-37.
PMID: 21606180 DOI: 10.1136/tc.2010.037630

OBJECTIVE: To review evidence on the impact of health warning messages on tobacco packages.
DATA SOURCES: Articles were identified through electronic databases of published articles, as well as relevant 'grey' literature using the following keywords: health warning, health message, health communication, label and labelling in conjunction with at least one of the following terms: smoking, tobacco, cigarette, product, package and pack.
STUDY SELECTION AND DATA EXTRACTION: Relevant articles available prior to January 2011 were screened for six methodological criteria. A total of 94 original original articles met inclusion criteria, including 72 quantitative studies, 16 qualitative studies, 5 studies with both qualitative and qualitative components, and 1 review paper: Canada (n=35), USA (n=29) Australia (n=16), UK (n=13), The Netherlands (n=3), France (n=3), New Zealand (n=3), Mexico (n=3), Brazil (n=2), Belgium (n=1), other European countries (n=10), Norway (n=1), Malaysia (n=1) and China (n=1).
RESULTS: The evidence indicates that the impact of health warnings depends upon their size and
DESIGN: whereas obscure text-only warnings appear to have little impact, prominent health warnings on the face of packages serve as a prominent source of health information for smokers and non-smokers, can increase health knowledge and perceptions of risk and can promote smoking cessation. The evidence also indicates that comprehensive warnings are effective among youth and may help to prevent smoking initiation. Pictorial health warnings that elicit strong emotional reactions are significantly more effective.
CONCLUSIONS: Health warnings on packages are among the most direct and prominent means of communicating with smokers. Larger warnings with pictures are significantly more effective than smaller, text-only messages.

Matched MeSH terms: Product Packaging/methods
Fulltext Effect of different types of plastic packaging films on the moisture and aflatoxin contents of pistachio nuts during storage

Shakerardekani A, Karim R

J Food Sci Technol, 2013 Apr;50(2):409-11.
PMID: 24425936 DOI: 10.1007/s13197-012-0624-0

Pistachio nut (Pistacia vera L.) is one of the popular tree nuts in the world. Proper selection of packaging materials is necessary to prevent absorption of moisture and aflatoxin formation which will influence the overall product quality and safety. This research is undertaken to study the effect of different type of flexible packaging films on the moisture and aflatoxin contents of whole pistachio nuts during storage at ambient temperature (22-28 °C) and relative humidity of 85-100%. Five types of plastic films tested were low density polyethylene (LDPE) which serves as the control, food-grade polyvinyl chloride (PVC), nylon (LDPE/PA), polyamide/polypropylene (PA/PP) and polyethylene terephthalate (PET). The moisture content and aflatoxin content of pistachio nuts were measured using oven drying method and HPLC, respectively. Sample were analysed at 0, 2, 4, 6, 8 and 10 months during the storage period. Results showed that there was an increase in moisture content with the increase in storage time of pistachio nuts. The increase in moisture content was associated with the aflatoxin level of pistachio nuts during storage time. All the packaging materials except LDPE delayed the moisture absorption and aflatoxin formation of the product. The most suitable packaging materials for maintaining the quality and safety of pistachio nuts is PET films followed by nylon, PA/PP and PVC. The shelf-life of pistachio can be extended from 2 months (Control) to 5 months when PET is used as the packaging material.

Matched MeSH terms: Product Packaging
Fulltext Release of bisphenol a from polycarbonate and polyethylene terephthalate drinking water bottles under different storage conditions and its associated health risk

Wen Min Yun, Yu Bin Ho, Eugenie Sin Sing Tan, Vivien How

Malaysian Journal of Medicine and Health Sciences, 2018;14(102):1-9.
MyJurnal

Bisphenol A (BPA) is a controversial plastics ingredient used mainly in the production of polycarbonate plastics (PC) and epoxy resins that widely used nowadays in food and drink packaging. Even though BPA is not involved in polyethylene terephthalate (PET) manufacturing, recent study had reported the present of BPA in PET water bottle. This study was conducted to investigate effects storage conditions on release of BPA from PC and PET bottled water as well as to assess health risks associated with consumption. Methods: Solid phase extraction (SPE) was used to extract the samples, followed by analysis using ultra high performance liquid chromatography with fluorescence detector (UHPLC-FLD). The possibility of developing chronic non-carcinogenic health risk among consumers of bottled water was evaluated using hazard quotient (HQ). Results: Results showed that BPA migrated from PC and PET water bottles at concentrations ranging from 9.13 to 257.67 ng/L and 11.53 ng/L to 269.87 ng/L respectively. Concentrations of BPA were higher in PET bottled water compared to PC bottled water across all storage conditions. Higher storage temperature and longer storage duration increased BPA concentrations in PC and PET bottled water. Concentrations of BPA in bottled water which were kept in a car and were exposed to sunlight were higher than control samples which were stored indoor at room temperature. Conclusion: No significant chronic non-carcinogenic health risks were calculated for daily ingestion of BPA-contaminated bottled water; calculated HQ was less than one.

Matched MeSH terms: Product Packaging
Fulltext Sodium content in sauces-a major contributor of sodium intake in Malaysia: a cross-sectional survey

Shahar S, You YX, Zainuddin NS, Michael V, Ambak R, Haron H, et al.

BMJ Open, 2019 05 27;9(5):e025068.
PMID: 31133578 DOI: 10.1136/bmjopen-2018-025068

OBJECTIVE: To investigate the sodium content in sauces sold in Malaysian supermarkets.
METHODS: A cross-sectional market survey was conducted in 2017 of 233 sauces sold in Malaysian supermarkets. Information on the sodium content was collected from the product packaging and nutrient information panels of the sauces sold in the seven top supermarkets in the capital of Malaysia.
RESULTS: Of the 233 sauces surveyed, 116 did not include sodium content information on the nutrient information panel (49.8%). Soy sauce (particularly sweet soy sauce) and ketchup (particularly chilli sauce) were found to be the highest number of products surveyed in the analysis (N=54 and N=48, respectively). The highest sodium content information was displayed by fish/prawn sauce (budu/cencalok) (5192±3228 mg/100 g) which was followed by the light/thin soy sauce (5116±2084 mg/100 g), and followed by salty soy sauce (4780±988 mg/100 g). The sodium content information of the imported sauces was higher compared with local products produced in Malaysia. However, for sweet soy sauce, the sodium content information of the local products was higher compared with the imported products. Of the 116 sauces which displayed information regarding their sodium content, only 18.2% of the salty soy sauce and 25% of the light/thin soy sauce were found to be below the 2017 Malaysian sodium guidelines. Furthermore, only 21.7% of chilli ketchup and no tomato ketchup were below the 2017 UK salt guidelines.
CONCLUSIONS: Almost half of the sauces surveyed did not include sodium content information on the nutrient information panel. It is recommended that sodium content information is provided on all sauces sold in Malaysia. Also, manufacturers should be urged to reduce the sodium content level of their sauces to a minimum of 5%.

Matched MeSH terms: Product Packaging
Electrochemical corrosion behaviour of Pb-free SAC 105 and SAC 305 Solder Alloys: a comparative study

Fayeka M, Haseeb A, Fazal MA

Sains Malaysiana, 2017;46:295-302.

Sn-Ag based solder alloy seems to be a promising lead-free solder for the application on electronic assembly. The corrosion behavior of different lead free solder alloys such as Sn-3.0Ag, Sn-1.0Ag-0.5Cu and Sn-3.0Ag-0.5Cu was investigated in 3.5% NaCl solution by potentiodynamic polarization and electrochemical impedance spectroscopy. Scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX) and X-ray diffraction (XRD) were used to characterize the samples after the tests. The results showed that the addition of 0.5 wt. % copper with Sn-3.0 Ag solder alloy led to a better corrosion resistance while lowering of Ag content from 3.0 to 1.0 wt. % decreased the resistance. Sn-3.0Ag-0.5Cu exhibits a better corrosion resistance in terms of increased charge transfer resistance and impedance values as well as the lowest capacitance. These characteristics signify its suitability for the application in electronic packaging.

Matched MeSH terms: Product Packaging
Processing of flexible plastic packaging waste into pyrolysis oil and multi-walled carbon nanotubes for electrocatalytic oxygen reduction

Veksha A, Yin K, Moo JGS, Oh WD, Ahamed A, Chen WQ, et al.

J Hazard Mater, 2020 04 05;387:121256.
PMID: 31951979 DOI: 10.1016/j.jhazmat.2019.121256

Flexible plastic packaging waste causes serious environmental issues due to challenges in recycling. This study investigated the conversion of flexible plastic packaging waste with 11.8 and 27.5 wt.% polyethylene terephthalate (PET) (denoted as PET-12 and PET-28, respectively) into oil and multi-walled carbon nanotubes (MWCNTs). The mixtures were initially pyrolyzed and the produced volatiles were processed over 9.0 wt.% Fe2O3 supported on ZSM-5 (400 °C) to remove oxygenated hydrocarbons (catalytic cracking of terephthalic and benzoic acids) that deteriorate oil quality. The contents of oxygenated hydrocarbons were decreased in oil from 4.6 and 9.4 wt.% per mass of PET-12 and PET-28, respectively, to undetectable levels. After catalytic cracking, the oil samples had similar contents of gasoline, diesel and heavy oil/wax fractions. The non-condensable gas was converted into MWCNTs over 0.9 wt.% Ni supported on CaCO3 (700 °C). The type of plastic packaging influenced the yields (2.4 and 1.5 wt.% per mass of PET-12 and PET-28, respectively) and the properties of MWCNTs due to the differences in gas composition. Regarding the electrocatalytic application, both MWCNTs from PET-12 and PET-28 outperformed commercial MWCNTs and Pt-based electrodes during oxygen evolution reaction, suggesting that MWCNTs from flexible plastic packaging can potentially replace conventional electrode materials.

Matched MeSH terms: Product Packaging
Fulltext Small/Kiddie Cigarette Packaging Size and Its Impact on Smoking: A Systematic Review

Mat Rifin H, Jane Ling MY, Robert Lourdes TG, Saminathan TA, Rodzlan Hasani WS, Ab Majid NL, et al.

Int J Environ Res Public Health, 2022 Sep 23;19(19).
PMID: 36231349 DOI: 10.3390/ijerph191912051

Background: Small cigarette pack sizes contain less than 20 cigarette sticks in a pack. Smaller packs may suggest lower costs, increasing affordability among lower-income users, especially the younger generation, which could lead to tobacco-related diseases and economic costs, including human capital lost results from tobacco-attributable morbidity and mortality. This concern has caused many countries to ban the sale of single cigarette sticks or kiddie packs. However, small cigarette pack sizes were proposed recently to be reintroduced by the tobacco industry with an excuse to prevent consumers from buying illicit cigarettes. This would demean efforts in combating tobacco consumption based on the existing tobacco control policies to prevent minors from purchasing cigarettes. Given the competing influences of affordability and availability of tobacco on consumption and the dearth of evidence-based review on the impact of pack size on smoking, this systematic review was conducted to identify the link between kiddie packs and smoking specifically on the initiation of smoking, urge/tendency to buy cigarettes among the general population and attempt to reduce cigarette consumption and prevalence of smoking using kiddie packs among current smokers. Methods: We include all studies except for reviews, guidelines, conference papers, commentaries, editorials, or opinion pieces. A database search was conducted in PubMed, EMBASE, CENTRAL, Web of Science and Scopus on 27 November 2021. The results were presented in the form of narrative synthesis under four groups: initiation of smoking; urge/tendency to buy cigarettes; the prevalence of smoking, and attempt to reduce cigarette consumption. The literature search identified 1601 articles, of which 21 articles had met the inclusion criteria. The methodological quality of all included articles was determined using a validated 16-item quality assessment tool (QATSDD). The average quality score for all papers was 34.8%. Discussion: Given the diverse study settings of the articles and despite the challenges of the methodological quality of some articles, this review provides some evidence that kiddie packs may increase the urge/tendency to buy cigarettes and mixed evidence on the attempt to reduce cigarette consumption. This review also found some evidence that kiddie pack purchasing among teenage smokers was higher compared to adults. However, we are uncertain about the link between kiddie packs and smoking initiation. Nevertheless, since most studies were of low quality, further high-quality studies are needed to conclude about the impact of kiddie packs on smoking to assist the policymakers and stakeholders in formulating new policies and strengthening existing strategies related to the kiddie packs.

Matched MeSH terms: Product Packaging
How the Malaysian tobacco industry exploits loopholes in pictorial health warnings

Tan YL, Foong K

Tob Control, 2012 Jan;21(1):55-6.
PMID: 21803928 DOI: 10.1136/tc.2011.042713
Matched MeSH terms: Product Packaging/legislation & jurisprudence
Cigarette price level and variation in five Southeast Asian countries

Liber AC, Ross H, Ratanachena S, Dorotheo EU, Foong K

Tob Control, 2015 Jun;24(e2):e137-41.
PMID: 24500266 DOI: 10.1136/tobaccocontrol-2013-051184

OBJECTIVES: To monitor and analyse impacts of the interaction between tobacco excise tax policy and industry price strategy, on the price level and variation of cigarettes sold in five Southeast Asian countries (Indonesia, Cambodia, Lao PDR, the Philippines and Vietnam).
METHODS: Prices of cigarette sold by sticks and packs were collected through an in-person survey of retailers during 2011. Mean cigarette prices and price variation were calculated in each study country for single cigarettes, whole packs and brand groups.
RESULTS: Price variation of whole packs was greater in countries with ad-valorem excise tax structures (Cambodia, Lao PDR and Vietnam) than in countries with multitiered specific excise taxes (Indonesia and the Philippines). The price variation for single sticks appeared to be driven by local currency denomination. Cigarettes sold individually cost more per stick than cigarettes sold in whole packs in every brand group except for Indonesia's domestic brands.
CONCLUSIONS: Tobacco industry strategy and excise tax structure drove the price level and variation of cigarettes sold in packs, while currency denominations influence the selling price of single sticks. To maximise the effectiveness of tobacco tax policies, countries should adopt specific excise tax structures to decrease cigarette price variation, which would minimise opportunities for smokers to 'trade down' to a cheaper brand to avoid a tax-driven price increase.
KEYWORDS: Low/Middle Income Country; Packaging and Labelling; Price; Surveillance and Monitoring; Taxation

Matched MeSH terms: Product Packaging
Some of the properties of flame retardant medium density fiberboard made from rubberwood and recycled containers containing aluminum trihydroxide

Hashim R, How LS, Kumar RN, Sulaiman O

Bioresour Technol, 2005 Nov;96(16):1826-31.
PMID: 16051090

The flame retardancy of medium density fiberboard (MDF) made from mixture of rubberwood fibers and recycled old corrugated containers was studied. Aluminum trihydroxide (ATH) was used as a fire retardant additive and mixed with the fibers to manufacture experimental MDF panels using wet process. Phenol formaldehyde (PF) resin in liquid, 2% based on oven dry weight of fibers, was used along with 0%, 10%, 15% and 20% of ATH. The flame retardant test was done using the limiting oxygen index (LOI) test. The other properties investigated include internal bond strength, thickness swelling and water absorption. The results showed that ATH loading increased as the LOI of MDF increased. This demonstrated that ATH could improved the fire retardant property of MDF at sufficient loading. An increase in concentration of ATH showed an increase in the IB values of MDF made without resin. MDF panels made without resin showed a progressive increase in internal bond as the composition of recycled old corrugated containers fiber increased. Addition of resin improved internal bond strength and reduced thickness swelling, and water absorption. Thickness swelling of panel increased as the composition of recycled old corrugated containers fiber increased. Scanning electron microscopy (SEM) and energy dispersive X-ray analysis (EDAX) showed that there is indication of ATH and resin filling the void space in between fibers.

Matched MeSH terms: Product Packaging

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links