Ceramic of BaxSr1-xTiO3 (BST) for x =0.3; 0.5 and 0.7 were successfully deposited by solid solution method. The BST ceramic were analyzed by x-ray diffraction (XRD). The XRD spectra was recorded on a Philips type PW 3701 diffractometer using CuKD (Oco = 1.54056 Å) radiation at 30 KV and 30 mA (900 watt). The spectra shows that BST ceramic are polycrystalline with tetragonal structure. The lattice constants analysis of the grown ceramics was analyzed by visual basic program. Using Cohen’s and Cramer’s algorithms in visual basic program, , the lattice constants are a = b = 3.877 Å; c = 3.970 Å for Ba0.3Sr0.7TiO3 ceramic, a = b = 3.979 Å; c = 3.981 Å. for Ba0.5Sr0.5TiO3 ceramic and a = b = 3.965 Å; c = 4.005 Å for Ba0.7Sr0.3TiO3 ceramic, respectively. The reform value of the lattice constant of BST ceramic is possibly associated with the anti site defects of Ba and Sr.
Respiratory metabolism of the larvae of Malaysian horseshoe crab Tachypleus gigas (Müller) was studied under different salinities, pH, and temperature. The trend in oxygen consumption was uniform at all salinities, ranging from 10-40 ppt, indicating insignificant influence on the oxygen consumption by the larvae. Similarly, the correlation coefficient values showed that the relationship between oxygen consumption and salinity was not significant (P > 0.05; r = 0.245). During the first three hours, the oxygen consumption was 8.89, 10.72, 17.4, and 12.06% at 10, 20, 30, and 40 ppt salinities, respectively. Meanwhile, the maximum oxygen consumption was recorded after 12 hrs, i.e. at salinity 20 ppt. A sudden drop in oxygen consumption was recorded during 3-6 hours of the experiment. This was followed by a gradual increase in the consumption of oxygen up to 12 hours of experiment. A similar trend in the oxygen consumption was observed in different pH levels, ranging from 5 to 9. At pH 6 and 9, during the first six hour, a moderate consumption of oxygen was observed. However, at pH 6, 7 and 8, the rates of oxygen consumption were found to be relatively greater after six hours, indicating unfavourable conditions. The data were statistically tested and it was found that a high degree of correlations existed between pH and oxygen consumption (r = 0.97). The analysis of covariance showed a significant relationship between oxygen consumption and pH (P < 0.05). Meanwhile, minimal variation in oxygen consumption was recorded between 30 and 40oC, with a
gradual decrease in dissolved oxygen concentration up to 12 hours of experimental time. At 50oC,
almost all dissolved oxygen was consumed by the larvae. The rate of oxygen consumption between
30 and 40oC was low during the first 9 hours of the experiment but it was significantly increased at later hours. A sudden increase in the oxygen consumption was recorded at 50oC, suggesting that it
might be the most unfavourable temperature condition. Meanwhile, a significant relationship was
observed between temperature and oxygen consumption (P < 0.05; r = 0.98).
Thermoelectric nanostructures hold great promise for capturing and directly converting into electricity some vast amount of low-grade waste heats now being lost to the environment (e.g. from nuclear power plant, fossil fuel burning, automotives and household appliances). In this study, large-area vertically-aligned silicon nanowire (SiNW) arrays were synthesized in an aqueous solution containing AgN•i and HF on p-type Si (100) substrate by self-selective electroless etching process. The etching conditions were systematically varied in order to achieve different stages of nanowire formation. Diameters of the SiNWs obtained varied from approximately 50 to 200 nm and their lengths ranged from several to a few tens of um. Te/Bi2Tex.Si thermoelectric core-shell nanostructures were subsequently obtained via galvanic displacement of SiNWs in acidic HF electrolytes containing HTe02+ and 139' /HTe02+ ions. The reactions were basically a nano-electrochemical process due to the difference in redox potentials between the materials. The surface-modified SiNWs of core-shell structures had roughened surface morphologies and, therefore, higher surface-to-bulk ratios compared to unmodified SiNWs. They have potential applications in sensors, photovoltaic and thermoelectric nanodevices. Growth study on the SiNWs and core-shell nanostructures produced is presented using various microscopy, diffraction and probe-based techniques for microstructural, morphological and chemical characterizations.
Varicella or chickenpox is an infectious disease caused by Varicella Zoster Virus (VZV), which commonly affects the children. It is a mild, self-limiting disease and rarely complicate to serious conditions except in adults. Decreasing incidence of chickenpox among children, probably owing to improved living conditions ,prevention and health care, is worrisome as growing number of adults are being infected. This creates disturbing concerns in many parties as women at childbearing age might get infected and not only are them at a great risk of serious complications, but also their unborn fetus or their newborn babies.
A field study was conducted on the effect of four primary tillage implements and three seed densities on the grain yield of rain fed wheat (Tajan cultivar), using a drill planting machine with the end wheels. The experimental design was a split plot design in a 4×3 factorial with three replications. In this study, the main plots were the tillage treatments, namely Mouldboard plough, Disc Plough, Chisel Plough, Offset Disc, and sub-plots were seed rates of 350, 400 and 450 seeds.m-2. Determinations included grain yield and selected yield components. The results showed that grain yield was not affected by the densities of seed and tillage machine treatments. The use of Chisel Plough, with 400 seeds.m-2 sowing rate, had the highest grain yield of wheat grown in the Golestan province (Iran), a region with an average annual rainfall of 450 mm.
In agricultural systems, animals play a very important multifunctional role for developing communities
throughout the world. This is reflected in the generation of value-added products like meat, milk and eggs for food security; socio-economic benefits like increased income, security and survival, and an infinite variety of services such as the supply of draught power and dung for soil fertility. However, and despite this importance, the situation is awesome since the projected total meat and milk consumption levels in 2020 are far in excess of anticipated supply, and projections of both meat and milk will have to be doubled by 2050 to meet human requirements. Strategies for productivity growth from animals are therefore urgent, and are discussed in the context of the scenario of waning agriculture, extreme poverty and hunger, food crisis, the current contributions from the components of the animal industries, prevailing constraints, opportunities and strategies for improved production. Current trends suggest that the non-ruminant pig and poultry industries will continue to contribute the major share of meat and all of egg production to meet projected human needs. With ruminants by comparison, overall meat production continues to come mainly from the slaughter of numbers. Strategic opportunities exist for maximising productivity in improved production systems. These include targeting rainfed areas, development of small farms, integrated crop-animal systems, intensive application of productivity-enhancing technologies, promoting intensive use of crop residues and expanding the R&D frontiers with interdisciplinarity and farming
systems perspectives. The issues, together with increased investments and institutional commitment, provide for expanded animal production systems and productivity which can forcefully impact on improved human welfare in Asia in the immediate tomorrow.
Helopeltis antonii is the major pest affecting cashew plants in Indonesia and causes potential damage to the plant. The development of the population was influenced by the fecundity and fertility of their eggs. The effect of mating on the eggs’ fecundity and the fertility of H. antonii was studied. Laboratory studies at Wonogiri Estate Service in Ngadirojo District, Wonogiri, Indonesia investigated the sexual maturity, the influence of female to male sex ratio on the females’ fecundity and longevity, and the influence of mating frequency to fecundity and the eggs hatchability of H. antonii. The study reveals that H. antonii females and males are ready to mate when they are two days old. The number of eggs laid and the longevity of the females’ lives were not significantly affected by the sex ratio; however, female to male sex ratios of 2:1 and 1:2 tended to produce a greater number of eggs. The fecundity of the female was not significantly influenced by the number of times the female mated. Unmated females laid fewer eggs than females paired with a mature male. The study shows that females need to mate to produce fertile eggs.
This study aims to determine the combined effects of hydrolysis time, temperature, pH and ratio of enzyme to substrate on the degree of hydrolysis (DH) of silver catfish frame using Response Surface Methodology. The proximate compositions of silver catfish frame and silver catfish hydrolysate powder were determined as well. The effects of independent factors were described using a three-level factors Face Centered Central Composite design. The suggested hydrolysis conditions for obtaining the optimum DH using Alcalase® were – temperature of 55oC, hydrolysis time of 163 min, pH of substrate at 9.45 and an enzyme concentration of 2.0%. The generated model showed a quadratic fit with experimental data. Proximate analyses revealed that silver catfish frame contained 25.02% protein, 68.21% fat and 7.08% ash. While silver catfish frame hydrolysate powder contained 65.05% protein, 32.92% fat and 0.86% ash. The protein recovery in silver catfish frame hydrolysate was as high as 71.6%.
The central coast of Tamil Nadu, Andaman and Nicobar Islands, along with other regions, was severely hit by the tsunami on 26 December 2004. A strange spawning behaviour of the Indian horseshoe crabs (Tachypleus gigas, Müller) was observed after the tsunami disturbance. Along the northeast coast of India, the horseshoe crabs normally migrate towards the shore in large numbers coinciding with the tidal height and grain size of the sediment and spawn in nests made in sand. The spawning behaviour was normal until November 2004 and throughout that period about 35 to 45 nests in 200 m2 of area of the breeding beach were examined. However, no nesting was observed from December 2004 to March 2005, i.e. after the occurrence of tsunami. The number of nests per 200 m2 of area (~82) and the number of eggs per nest (750-1000 eggs) were increased considerably when the normal conditions were restored in April 2005. The absence of spawning migration, from December 2004 to March 2005, is totally an unusual behaviour and this happened for the first time during the past several years of the study period.
The process of etching is the most crucial part of the work of manufacturing printed circuit boards (PCB). In the etching process by nitric acid, a spent etching waste solution of composition 250 g/L HNO3, 30-40 g/L Cu, 30-40 g/L Sn, 30-40 g/L Pb and 20-25 g/L Fe is produced. High metal concentrations in the spent etching waste solution make it a viable candidate for the recovery of metals. Recovery of metals from spent etching waste solution is a significant concern as the recent growth in production of printed circuit boards has generated a drastic increase of spent etching waste solution each year. This study concerns itself with the recovery of metals from spent etching waste. In this study a dilution was made in order to increase the pH of the solution as spent etching waste solution has high acidity, and the electrowinning method was performed to recover metals from the spent etching waste solution. Glassy carbon and platinum were used as cathode and anode in order to investigate the electrodeposition of metals and cyclic voltammetry investigation suggests that the deposition of metals on glassy carbon electrodes occurs at four different overpotentials mainly at -0.15 V, -0.35 V, -0.45 V and -0.75 V. Microscopy observation demonstrates that there is a deposition of metals by applying the potentials in a set of current-time transient study for a duration of 60 seconds and the metals recovered formed as aggregates.
To describe a quick and simple diagnostic approach to monocular diplopia. Diplopia is a common visual complain in casualty departments, general practice clinics, neurologic clinics as well as ophthalmic clinics. Monocular diplopia, however, is uncommon. Many well established clinical examination methods are available to address diplopia. Some require special equipments which are not easily available or unfamiliar outside of ophthalmic clinic. We describe a simple two-minute diagnostic approach to monocular diplopia. Basic knowledge and understanding of simple clinical examination techniques enhances diagnostic skill and allow proper localization of underlying disorders.
Transition metals play an important role in the growth of carbon nanotubes (CNTs). Series of unsupported hybrid catalysts consisting of Ni:Cu, Ni:Cr, and Ni:Mn doped with Nd catalyst, respectively were synthesized by impregnation method. The catalytic performance of the catalyst for the production of CNTs was measured in the pyrolysis process of hydrocarbon source by catalytic chemical vapour deposition method. Acetylene gas was used as the source of carbon in the pyrolysis process. The decomposition of acetylene was carried out at 700ºC. The bulk properties of the catalysts were investigated by X-ray diffraction. Field emission scanning electron microscopy and thermal analysis were used to observe the morphology and thermal stability of the as-synthesized CNTs, respectively. Hybrid catalyst of Ni:Mn/Nd and Ni:Cr/Nd in 3:1 atomic ratio gave high percentage of carbon yield which was assigned for the high production of CNTs with the mass of yield 18 times greater than the initial mass of the catalyst used.
The use of component from Ganoderma lucidum as prebiotic source is interesting as the G. lucidum itself was known for more than a decade in the traditional Chinese medicine. In this work, Ganoderma lucidum crude polysaccharides (GLCP) and Polysaccharide-fraction number 2 (PF-2) were used as carbon sources in the fermentation with Bifidobacterium sp. The results showed the potential of prebiotic effect of the G. lucidum extract in batch-culture fermentation based on increment in the growth of bacteria used (0.4 – 1.5 log10 CFU/mL) after 18h fermentation. Fermentation was further done using faecal materials as bacterial inocula and bacterial growth changes were examined using real-time PCR. The results showed the ability of GLCP and PF-2 to support the growth of Bifidobacterium genus with 0.3 and 0.7 log10 cells/ml increased, respectively. Interestingly, Lactobacillus which is known as beneficial bacterial genus also showed growth increment with 0.7 and 1 log10 cells/ml increased. The competition for carbon sources thus inhibits the growth of potentially harmful genus, Salmonella (0.3 and 0.5 log10 cells/ml) in comparison to the control.
Cronobacter sakazakii is an emerging food borne pathogen which has been associated with outbreaks of a rare form of infant meningitis. Although the origin of the microorganism has not been established, several
infection cases have been associated with the consumption of contaminated powdered infant formula (PIF). In the present study, growth characteristics of three C. sakazakii strains isolated from PIF samples and C.
muytjensii strain ATCC 51329, which was formerly the ATCC Preceptrol™ strain for the quality control of
‘Enterobacter sakazakii’ prior to the taxonomic revision, were investigated in Tryptone Soya broth (TSB) and
reconstituted PIF at 4, 10, 25, 37, 45 and 50ºC. The viability of heat treated cells of Cronobacter strains was
evaluated by plating on Violet Red Bile Glucose agar (VRBGA) and the Druggan-Forsythe-Iversen (DFI)
chromogenic agar followed by incubation at 37ºC. These strains were also subjected to higher temperatures
between 52 to 60ºC to measure their thermal tolerance. The mean generation time of all Cronobacter strains
were slightly lower in PIF than in TSB. C. muytjensii ATCC 51329 showed lower generation time in all culture
media and all temperatures compared to the Cronobacter food isolates, but the results were not significantly
different (P>0.05). The results also indicated that combination of PIF: DFI culture media had higher recovery at
all temperatures compared to other combinations. Survival study also indicated that C. muytjensii ATCC 51329
had higher D-value compared to food isolates at all incubation temperatures.
Chili shrimp paste (CSP) is a favorite condiment in Southeast Asia. Microbial spoilage makes CSP unsuitable for consumption within several days. Thermal treatment was applied to produce microbiologically safe CSP. The effect of heating process on physicochemical and sensorial properties of CSP was studied. Heating at the optimum condition (21.6 min, 80 ˚C) has been shown effective and reliable in controlling microorganisms in CSP. Complete inactivation of peroxidase activities could not be accomplished at the optimal point, and significant reduction of the total phenolic and capsaicinoids contents was observed. Sensorial evaluation indicated that thermally processed CSP was less preferred by panelists when compared to freshly prepared samples of dry weight respectively.
The Malaysian skincare industry is growing rapidly with a vast number of new sunscreens being produced annually. Inadequate skincare regulations and lack of enforcement have resulted in the overrating of sunscreens’ quality. The objectives of this study were to evaluate the efficacy and safety of the local and international sunscreens and to determine the effects of adding concentrated antioxidants into them. Three local and three internationally manufactured sunscreens were tested for the in vitro Ultraviolet A protection factor (UVAPF), Sun Protection Factor (SPF) and photostability. The creams were spread onto roughened polymethylmethacrylate plates where the absorbance was measured using a spectrophotometer before and after two hours of sunlight irradiation. The procedure was repeated combining available concentrated vitamin C and E creams. International sunscreens were found to have more accurate SPF labels (p=0.009) while local sunscreens were found to be more photostable (p=0.003). However, both sunscreens had inadequate UVAPF (p=0.471). Vitamin C enhanced the SPF values (p= 0.04) of both groups of sunscreens while vitamin E enhanced their photostability (p=0.000). Interestingly, combining vitamins C and E rich creams with the sunscreens had no effect on the SPF and UVAPF values as compared to the use of a single vitamin. More importantly, the combination of vitamins decreased the photostability (p=0.002) of sunscreens as compared to the addition of vitamin E alone. In conclusion, photoprotection is best achieved when sunscreens are used together with creams containing either vitamin C or E alone.
The exponential fed-batch cultivation of Bacillus sphaericus UPMB10 in 2 l stirred tank fermenter was performed by feeding the initial batch culture with 14 g l-1 of glycerol according to the algorithm aimed at controlling the specific growth rate (μ) of the bacterium. Very high viable cell count (1.14 x 1010 cfu ml-1), which was four times higher as compared to batch cultivation, was achieved in the fed-batch with a controlled μ at 0.4 h-1. In repeated exponential fed-batch cultivation, consisting of four cycles of harvesting and recharging, a final cell concentration of 1.9 x 1011 cfu ml-1 was obtained at the end of the fourth cycle (46 h). Meanwhile, acetylene reduction of cell samples collected from repeated fed-batch cultivation remained unchanged and was maintained at around 20 nmol C2H2 h-1 ml-1 after prolonged cultivation period, and was comparable to those obtained in batch and exponential fed-batch cultivation. Glycerol could be used as a carbon source for high performance cultivation of B. sphaericus, a nitrogen fixing bacterium, in repeated fed-batch cultivation with high cell yield and cell productivity. The productivity (0.68 g l-1 h-1) for repeated fed-batch cultivation increased about 6 times compared to that obtained in conventional batch cultivation (0.11 g l1 h-1). A innovative method in utilizing glycerol for efficient cultivation of nitrogen fixing bacterium could be beneficial to get more understanding and reference in manipulating the integrated plans for sustainable and profitable biodiesel industry.
Introduction: Presently, the use of Eurycoma longifolia Jack (ELJ) (Tongkat Ali) has increased dramatically in Southeast Asia especially Malaysia where it is widely used as aphrodisiac and anti-malarial agent. Interestingly, its consumption has become popular in daily life as beverage to enhance energy and stamina especially among males. However, its effect on the safety of vital organs of the body has not been studied adequately. Hence, the main objective of this study was to determine whether or not long-term use of ELJ any has side effects on the liver in rats.
Methods: Three different concentrations of aqueous extract of ELJ were prepared and dissolved in distilled water. A total of 32 Sprague-Dawley male rats were used and randomly divided into three test groups and control. The test groups were given different doses (low dose 250 mg/kg bw, medium dose 500mg/kg bw and high dose 1000 mg/kg bw) of aqueous extract of ELJ, respectively. Control group was given distilled water alone. Doses were given orally and daily for 5 weeks. After 5 weeks, animals were sacrificed; whole liver tissues were obtained, fixed in 10 percent formaldehyde overnight for histological examination.
Result: Histological observations showed mild to moderate degrees of hemorrhage, hepatocytes degeneration and severe fatty changes in liver tissue of the test groups treated with ELJ as compared to control.
Conclusion: In conclusion, the long-term daily consumption of ELJ in large quantity as beverage may cause fatty changes, hemorrhage and hepatocytes degeneration in the liver tissue.
Protocorm-like bodies (PLBs) of an orchid (Oncidium lanceanum) were irradiated using 220 MeV 12 C 5+ ions, accelerated by AVF cyclotron at JAEA, Japan in 2005. Five different doses were applied to the PLBs; 0, 1.0, 2.0, 6.0 and 12.0 Gy. Following irradiation, these PLBs were maintained in cultures for germination and multiplication. Irradiation effects on growth and seedling regeneration patterns as well as molecular characteristics of the in vitro cultures were monitored and recorded. In general, average fresh weights of the irradiated PLBs increased progressively by irradiating the explants at 1.0, 2.0 and reached the maximum at 6.0 Gy. The figure however dropped when the explants were irradiated at 12 Gy. Surprisingly, although the highest average fresh weight was recorded on PLBs irradiated at 6.0 Gy, most of these PLBs were not able to regenerate into complete shoots. On average, after 4 months of irradiation, only 21 seedlings were successfully regenerated from each gram of these PLBs. The highest shoot regeneration was recorded on cultures irradiated at 2.0 Gy in which 102 seedlings were obtained from one gram of the PLBs. Some morphological changes were seen on in vitro plantlets derived from PLBs irradiated at doses of 1.0 and 2.0 Gy. Most of the regenerated seedlings have been transferred to glasshouse for further morphological selection. Molecular analysis showed the presence of DNA polymorphisms among the seedlings from different doses of irradiation.
Objective: To investigate the prevalence of Female Orgasmic Dysfunction (FOD) focusing on the orgasm domain among female patients attending PPUKM Psychiatric clinic. To compare the prevalence of orgasmic dysfunction between female patients on Escitalopram and on Fluoxetine therapy.
Methods: A validated questionnaire for sexual function was used to assess orgasmic function. A total of 112 women aged between 24 and 57 participated in this study. The orgasmic dysfunction was compared between patients on selective serotonin reuptake inhibitors (SSRIs) fluoxetine and escitalopram.
Results: The prevalence of female orgasmic dysfunction was 58.9% (33/56) among patients treated with Fluoxetine and 41.1% (23/56) among patients treated with Escitalopram. However, there was no statistically significant difference between these two treatment groups (p=0.059). The odds to have FOD among patients on higher dose of antidepressants was found to be higher compared to those patients who were on lower dose of antidepressants (Odds ratio 5.32, p= 0.001).
Conclusion: There was no significant difference of Female Orgasmic Dysfunction between patients on Fluoxetine and Escitalopram.
Study site: Psychiatric clinics, Pusat Perubatan Universiti Kebangsaan Malaysia (PPUKM), Kuala Lumpur, Malaysia