MyMedR

Displaying publications 21 - 40 of 64 in total

Abstract:

Sort:

Fulltext Low-dose AgNPs reduce lung mechanical function and innate immune defense in the absence of cellular toxicity

Botelho DJ, Leo BF, Massa CB, Sarkar S, Tetley TD, Chung KF, et al.

Nanotoxicology, 2016;10(1):118-27.
PMID: 26152688 DOI: 10.3109/17435390.2015.1038330

Multiple studies have examined the direct cellular toxicity of silver nanoparticles (AgNPs). However, the lung is a complex biological system with multiple cell types and a lipid-rich surface fluid; therefore, organ level responses may not depend on direct cellular toxicity. We hypothesized that interaction with the lung lining is a critical determinant of organ level responses. Here, we have examined the effects of low dose intratracheal instillation of AgNPs (0.05 μg/g body weight) 20 and 110 nm diameter in size, and functionalized with citrate or polyvinylpyrrolidone. Both size and functionalization were significant factors in particle aggregation and lipid interaction in vitro. One day post-intratracheal instillation lung function was assessed, and bronchoalveolar lavage (BAL) and lung tissue collected. There were no signs of overt inflammation. There was no change in surfactant protein-B content in the BAL but there was loss of surfactant protein-D with polyvinylpyrrolidone (PVP)-stabilized particles. Mechanical impedance data demonstrated a significant increase in pulmonary elastance as compared to control, greatest with 110 nm PVP-stabilized particles. Seven days post-instillation of PVP-stabilized particles increased BAL cell counts, and reduced lung function was observed. These changes resolved by 21 days. Hence, AgNP-mediated alterations in the lung lining and mechanical function resolve by 21 days. Larger particles and PVP stabilization produce the largest disruptions. These studies demonstrate that low dose AgNPs elicit deficits in both mechanical and innate immune defense function, suggesting that organ level toxicity should be considered.

Matched MeSH terms: Povidone/pharmacology
Treatment of laundry wastewater using polyethersulfone/polyvinylpyrollidone ultrafiltration membranes

Sumisha A, Arthanareeswaran G, Lukka Thuyavan Y, Ismail AF, Chakraborty S

Ecotoxicol Environ Saf, 2015 Nov;121:174-9.
PMID: 25890841 DOI: 10.1016/j.ecoenv.2015.04.004

In this study, laundry wastewater filtration was studied using hydrophilic polyvinylpyrollidone (PVP) modified polyethersulfone (PES) ultrafiltration membranes. The performances of PES/PVP membranes were assessed using commercial PES membrane with 10kDa in ultrafiltration. Operating parameters The influence of transmembrane pressure (TMP) and stirring speed on laundry wastewater flux was investigated. A higher permeate flux of 55.2L/m(2)h was obtained for modified PES membrane with high concentration of PVP at TMP of 500kPa and 750rpm of stirring speed. The separation efficiencies of membranes were also studied with respect to chemical oxygen demand (COD), total dissolved solids (TDS), turbidity and conductivity. Results showed that PES membrane with 10% of PVP had higher permeate flux, flux recovery and less fouling when compared with other membranes. Higher COD and TDS rejection of 88% and 82% were also observed for modified membranes due to the improved surface property of membranes. This indicated that modified PES membranes are suitable for the treatment of surfactant, detergent and oil from laundry wastewater.

Matched MeSH terms: Povidone/chemistry*
Investigation of interpolymer complexation between Carbopol and various grades of polyvinylpyrrolidone and effects on adhesion strength and swelling properties

Tan YT, Peh KK, Al-Hanba O

J Pharm Pharm Sci, 2001 Jan-Apr;4(1):7-14.
PMID: 11302785

To investigate the interpolymer complexation between Carbopol 934P (CP) and various grades of polyvinylpyrrolidone (PVP) (K90, K32, C15, and VA/S-630).

Matched MeSH terms: Povidone/chemistry*
Haemolytic, oedema and haemorrhage inducing activities of tentacular extract of the blubber jellyfish (Catostylus mosaicus)

Azila N, Siao FK, Othman I

Comp Biochem Physiol C Comp Pharmacol Toxicol, 1991;99(1-2):153-6.
PMID: 1675964

1. An extract prepared from the tentacle of the jellyfish (CE), Catostylus mosaicus exhibited haemolytic, oedema and haemorrhage-inducing activities. 2. Acetone treatment of the tentacle extract produced an acetone soluble extract (AE) which showed an increase in specific haemolytic and haemorrhagic activities by 25- and 120-fold respectively; the minimum oedema dose was reduced by 30-fold. 3. The AE caused a rapid onset of oedema in the mouse foot pad. The effect was long-lasting, reaching a maximum in about 30 min after injection and sustained up to 4 hr. 4. Fractionation of the AE on Q-Sepharose gave 4 bound fractions which induced oedema and haemorrhage; however only 3 of the fractions exhibited haemolytic activity.

Matched MeSH terms: Povidone/toxicity
Effect of Carbopol and polyvinylpyrrolidone on the mechanical, rheological, and release properties of bioadhesive polyethylene glycol gels

Tan YT, Peh KK, Al-Hanbali O

AAPS PharmSciTech, 2000;1(3):E24.
PMID: 14727910

This study examined the mechanical (hardness, compressibility, adhesiveness, and cohesiveness) and rheological (zero-rate viscosity and thixotropy) properties of polyethylene glycol (PEG) gels that contain different ratios of Carbopol 934P (CP) and polyvinylpyrrolidone K90 (PVP). Mechanical properties were examined using a texture analyzer (TA-XT2), and rheological properties were examined using a rheometer (Rheomat 115A). In addition, lidocaine release from gels was evaluated using a release apparatus simulating the buccal condition. The results indicated that an increase in CP concentration significantly increased gel compressibility, hardness, and adhesiveness, factors that affect ease of gel removal from container, ease of gel application onto mucosal membrane, and gel bioadhesion. However, CP concentration was negatively correlated with gel cohesiveness, a factor representing structural reformation. In contrast, PVP concentration was negatively correlated with gel hardness and compressibility, but positively correlated with gel cohesiveness. All PEG gels exhibited pseudoplastic flow with thixotropy, indicating a general loss of consistency with increased shearing stress. Drug release T50% was affected by the flow rate of the simulated saliva solution. A reduction in the flow rate caused a slower drug release and hence a higher T50% value. In addition, drug release was significantly reduced as the concentrations of CP and PVP increased because of the increase in zero-rate viscosity of the gels. Response surfaces and contour plots of the dependent variables further substantiated that various combinations of CP and PVP in the PEG gels offered a wide range of mechanical, rheological, and drug-release characteristics. A combination of CP and PVP with complementary physical properties resulted in a prolonged buccal drug delivery.

Matched MeSH terms: Povidone/chemistry*
Fulltext Mechanism-based selection of stabilization strategy for amorphous formulations: Insights into crystallization pathways

Edueng K, Mahlin D, Larsson P, Bergström CAS

J Control Release, 2017 06 28;256:193-202.
PMID: 28412224 DOI: 10.1016/j.jconrel.2017.04.015

We developed a step-by-step experimental protocol using differential scanning calorimetry (DSC), dynamic vapour sorption (DVS), polarized light microscopy (PLM) and a small-scale dissolution apparatus (μDISS Profiler) to investigate the mechanism (solid-to-solid or solution-mediated) by which crystallization of amorphous drugs occurs upon dissolution. This protocol then guided how to stabilize the amorphous formulation. Indapamide, metolazone, glibenclamide and glipizide were selected as model drugs and HPMC (Pharmacoat 606) and PVP (K30) as stabilizing polymers. Spray-dried amorphous indapamide, metolazone and glibenclamide crystallized via solution-mediated nucleation while glipizide suffered from solid-to-solid crystallization. The addition of 0.001%-0.01% (w/v) HPMC into the dissolution medium successfully prevented the crystallization of supersaturated solutions of indapamide and metolazone whereas it only reduced the crystallization rate for glibenclamide. Amorphous solid dispersion (ASD) formulation of glipizide and PVP K30, at a ratio of 50:50% (w/w) reduced but did not completely eliminate the solid-to-solid crystallization of glipizide even though the overall dissolution rate was enhanced both in the absence and presence of HPMC. Raman spectroscopy indicated the formation of a glipizide polymorph in the dissolution medium with higher solubility than the stable polymorph. As a complementary technique, molecular dynamics (MD) simulations of indapamide and glibenclamide with HPMC was performed. It was revealed that hydrogen bonding patterns of the two drugs with HPMC differed significantly, suggesting that hydrogen bonding may play a role in the greater stabilizing effect on supersaturation of indapamide, compared to glibenclamide.

Matched MeSH terms: Povidone/chemistry
Fulltext Povidone iodine in wound healing: A review of current concepts and practices

Bigliardi PL, Alsagoff SAL, El-Kafrawi HY, Pyon JK, Wa CTC, Villa MA

Int J Surg, 2017 Aug;44:260-268.
PMID: 28648795 DOI: 10.1016/j.ijsu.2017.06.073

BACKGROUND: Of the many antimicrobial agents available, iodophore-based formulations such as povidone iodine have remained popular after decades of use for antisepsis and wound healing applications due to their favorable efficacy and tolerability. Povidone iodine's broad spectrum of activity, ability to penetrate biofilms, lack of associated resistance, anti-inflammatory properties, low cytotoxicity and good tolerability have been cited as important factors, and no negative effect on wound healing has been observed in clinical practice. Over the past few decades, numerous reports on the use of povidone iodine have been published, however, many of these studies are of differing design, endpoints, and quality. More recent data clearly supports its use in wound healing.
METHODS: Based on data collected through PubMed using specified search criteria based on above topics and clinical experience of the authors, this article will review preclinical and clinical safety and efficacy data on the use of povidone iodine in wound healing and its implications for the control of infection and inflammation, together with the authors' advice for the successful treatment of acute and chronic wounds.
RESULTS AND CONCLUSION: Povidone iodine has many characteristics that position it extraordinarily well for wound healing, including its broad antimicrobial spectrum, lack of resistance, efficacy against biofilms, good tolerability and its effect on excessive inflammation. Due to its rapid, potent, broad-spectrum antimicrobial properties, and favorable risk/benefit profile, povidone iodine is expected to remain a highly effective treatment for acute and chronic wounds in the foreseeable future.

Matched MeSH terms: Povidone-Iodine/therapeutic use*
Sustainable Dissolution Performance of a Carrier Tailored Electrospun

Teoh XY, Yeoh Y, Yoong LK, Chan SY

Pharm Res, 2020 Jan 07;37(2):28.
PMID: 31912250 DOI: 10.1007/s11095-019-2734-0

PURPOSE: This study aims to conduct an impact investigation in the hydrophobic-hydrophilic balance as an important factor for dissolution improvement of a hydrophilic carrier-based solid dispersion system.
METHODS: Polymeric carriers with different hydrophobic to hydrophilic ratios were used to prepare several electrospun solid dispersion formulations. Physicochemical properties and surface morphology of the samples were assessed using Attenuated Total Reflectance Fourier Transform Infrared (ATR-FTIR), polarized light microscopy, Differential Scanning Calorimetry (DSC), X-ray Powder Diffraction (XRPD) and Scanning Electron Microscopy (SEM). Dissolution study was conducted in a non-sink condition to assess the drug release.
RESULTS: Incorporation of a higher amount of hydrophilic component showed an improvement in formulating a fully amorphous system based on XRPD, yet the dissolution rate increment showed no significant difference from the lower. Hence, the degree of crystallinity is proven not to be the crucial factor contributing to dissolution rate improvement. The presence of a concomitant hydrophobic component, however, showed ability in resisting precipitation and sustaining supersaturation.
CONCLUSION: Hydrophobicity in a binary carrier system plays an important role in achieving and maintaining the supersaturated state particularly for an amorphous solid dispersion. Graphical Abstract.

Matched MeSH terms: Povidone/chemistry*
Design of a 24-hour controlled porosity osmotic pump system containing PVP: formulation variables

Yakubu R, Peh KK, Tan YT

Drug Dev Ind Pharm, 2009 Dec;35(12):1430-8.
PMID: 19929202 DOI: 10.3109/03639040902988566

The purpose of this study was to design a 24-hour controlled porosity osmotic pump system that utilizes polyvinyl pyrrolidone (PVP) as an osmotic-suspending/release retarding agent of drugs.

Matched MeSH terms: Povidone/chemistry*
Fabrication and dialysis performance of functionalized multiwall carbon nanotubes integrated cellulose acetate/poly(vinylpyrrolidone) membranes

Ashraf MA, Islam A, Butt MA, Hussain T, Khan RU, Bashir S, et al.

Int J Biol Macromol, 2021 Nov 30;191:872-880.
PMID: 34571131 DOI: 10.1016/j.ijbiomac.2021.09.131

Mixed matrix membranes (MMMs) of cellulose acetate/poly(vinylpyrrolidone) (CA/PVP) infused with acid functionalized multiwall carbon nanotubes (f-MWCNTs) were fabricated by an immersion phase separation technique for hemodialysis application. Membranes were characterized using FTIR, water uptake, contact angle, TGA, DMA and SEM analysis. The FTIR was used to confirm the bonding interaction between CA/PVP membrane matrix and f-MWCNTs. Upon addition of f-MWCNTs, TGA thermograms and glass transition temperature indicated improved thermal stability of MMMs. The surface morphological analysis demonstrated revealed uniform distribution of f-MWCNTs and asymmetric membrane structure. The water uptake and contact angle confirmed that hydrophilicity was increased after incorporation of f-MWCNTs. The membranes demonstrated enhancement in water permeate flux, bovine serum albumin (BSA) rejection with the infusion of f-MWCNTs; whereas BSA based anti-fouling analysis using flux recovery ratio test shown up to 8.4% improvement. The urea and creatinine clearance performance of MMMs were evaluated by dialysis experiment. It has been found that f-MWCNTs integrated membranes demonstrated the higher urea and creatinine clearance with increase of 12.6% and 10.5% in comparison to the neat CA/PVP membrane. Thus, the prepared CA/PVP membranes embedded with f-MWCNTs can be employed for wide range of dialysis applications.

Matched MeSH terms: Povidone/chemistry*
Fulltext Influence of Poly(vinylpyrrolidone) concentration on properties of silver nanoparticles manufactured by modified thermal treatment method

Gharibshahi L, Saion E, Gharibshahi E, Shaari AH, Matori KA

PLoS One, 2017;12(10):e0186094.
PMID: 29045414 DOI: 10.1371/journal.pone.0186094

Very narrow and pure silver nanoparticles were synthesized by modified thermal treatment method via oxygen and nitrogen flow in succession. The structural and optical properties of the calcined silver nanoparticles at 600°C with diverse Poly(vinylpyrrolidone) concentrations varied from 2% to 4% were studied by means of different techniques. Fourier transform infrared spectroscopy was used to monitor the production of pure Ag nanoparticles at a given Poly(vinylpyrrolidone) concentration. The X-ray powder diffraction spectra are evidence for the transformation of the amorphous sample at 30°C to the cubic crystalline nanostructures at the calcination temperatures for all Poly(vinylpyrrolidone) concentrations. The transmission electron microscopy images showed the creation of spherical silver nanoparticles with the average particle size decreased by increasing Poly(vinylpyrrolidone) concentrations from 4.61 nm at 2% to 2.49 nm at 4% Poly(vinylpyrrolidone). The optical properties were investigated by means of UV-vis absorption spectrophotometer, which showed an increase in the conduction band of Ag nanoparticles with increasing Poly(vinylpyrrolidone) concentrations from 2.83 eV at 2% Poly(vinylpyrrolidone) to 2.94 eV at 4% Poly(vinylpyrrolidone) due to decreasing particle size. This was due to less attraction between conduction electrons and metal ions for smaller particle size corresponding to fewer atoms that made up the metal nanoparticles.

Matched MeSH terms: Povidone/pharmacology*
Fulltext A facile thermal-treatment route to synthesize ZnO nanosheets and effect of calcination temperature

Al-Hada NM, Saion EB, Shaari AH, Kamarudin MA, Flaifel MH, Ahmad SH, et al.

PLoS One, 2014;9(8):e103134.
PMID: 25093752 DOI: 10.1371/journal.pone.0103134

A facile thermal-treatment route was successfully used to synthesize ZnO nanosheets. Morphological, structural, and optical properties of obtained nanoparticles at different calcination temperatures were studied using various techniques. The FTIR, XRD, EDX, SEM and TEM images confirmed the formation of ZnO nanosheets through calcination in the temperature between 500 to 650 °C. The SEM images showed a morphological structure of ZnO nanosheets, which inclined to crumble at higher calcination temperatures. The XRD and FTIR spectra revealed that the samples were amorphous at 30 °C but transformed into a crystalline structure during calcination process. The average particle size and degree of crystallinity increased with increasing calcination temperature. The estimated average particle sizes from TEM images were about 23 and 38 nm for the lowest and highest calcination temperature i.e. 500 and 650 °C, respectively. The optical properties were determined by UV-Vis reflection spectrophotometer and showed a decrease in the band gap with increasing calcination temperature.

Matched MeSH terms: Povidone/chemistry
Fulltext Fabrication, characterization, and thermal property evaluation of silver nanofluids

Noroozi M, Radiman S, Zakaria A, Soltaninejad S

Nanoscale Res Lett, 2014;9(1):645.
PMID: 25489293 DOI: 10.1186/1556-276X-9-645

Silver nanoparticles were successfully prepared in two different solvents using a microwave heating technique, with various irradiation times. The silver nanoparticles were dispersed in polar liquids (distilled water and ethylene glycol) without any other reducing agent, in the presence of the stabilizer polyvinylpyrrolidone (PVP). The optical properties, thermal properties, and morphology of the synthesized silver particles were characterized using ultraviolet-visible spectroscopy, photopyroelectric technique, and transmission electron microscopy. It was found that for the both solvents, the effect of microwave irradiation was mainly on the particles distribution, rather than the size, which enabled to make stable and homogeneous silver nanofluids. The individual spherical nanostructure of self-assembled nanoparticles has been formed during microwave irradiation. Ethylene glycol solution, due to its special properties, such as high dielectric loss, high molecular weight, and high boiling point, can serve as a good solvent for microwave heating and is found to be a more suitable medium than the distilled water. A photopyroelectric technique was carried out to measure thermal diffusivity of the samples. The precision and accuracy of this technique was established by comparing the measured thermal diffusivity of the distilled water and ethylene glycol with values reported in the literature. The thermal diffusivity ratio of the silver nanofluids increased up to 1.15 and 1.25 for distilled water and ethylene glycol, respectively.

Matched MeSH terms: Povidone
A novel wound healing accelerator: Effect of vitreous gel of cow eyeball on a chronic wound model

Makhmudi A, Wirohadidjojo YW, Gahara E, Noor HZ, Sunardi M, Mahmudah NA, et al.

Med J Malaysia, 2020 11;75(6):698-704.
PMID: 33219180

INTRODUCTION: Several studies have reported the disturbance in the process of wound healing after administration of mitomycin-C, which inhibits granulation tissue formation and collagen synthesis, resulting in chronic wounds. The vitreous gel of cow eyeballs contains a high level of hyaluronic acid, which has a role in inflammation, granulation, re-epithelialization, and remodelling. This study aims to understand the effect of 1% povidone iodine and vitreous gel of cow eyeballs on wound healing after administration of mitomycin-C.
METHODS: This was an in vivo study with quasi-experimental methods on 32 Wistar mice. Full-thickness wounds were made and then treated with mitomicyn-C. The mice were divided into 4 groups: a control group with NaCl 0.9% vitreous gel of cow eyeball (VGCE), 1% povidone-iodine, and a combination of VGCE and 1% povidone-iodine groups. Macroscopic and microscopic observations of the process of wound healing were performed on days 3, 7, and 14.
RESULTS: Vitreous gel administration produced significant wound healing rates within the first three days, and histological analysis revealed an increased number of fibroblasts and polymorphonuclear cells. However, the povidone iodine group and the combination group with vitreous gel did not produce significant results.
CONCLUSION: The single administration of VGCE can accelerate the wound healing process, increase the number of fibroblasts, and reduce inflammation in a chronic wound model.

Matched MeSH terms: Povidone-Iodine
Fulltext Development of Polyvinylidene Fluoride Membrane via Assembly of Tannic Acid and Polyvinylpyrrolidone for Filtration of Oil/Water Emulsion

Nawi NIM, Ong Amat S, Bilad MR, Nordin NAHM, Shamsuddin N, Prayogi S, et al.

Polymers (Basel), 2021 Mar 22;13(6).
PMID: 33810126 DOI: 10.3390/polym13060976

Wastewater containing oil/water emulsion has a serious ecological impact and threatens human health. The impact worsens as its volume increases. Oil/water emulsion needs to be treated before it is discharged or reused again for processing. A membrane-based process is considered attractive in effectively treating oil/water emulsion, but progress has been dampened by the membrane fouling issue. The objective of this study is to develop polyvinylidene fluoride (PVDF) membranes customized for oil/water emulsion separation by incorporating assembly of tannic acid (TA) and polyvinylpyrrolidone (PVP) in the polymer matrix. The results show that the assembly of TA/PVP complexation was achieved as observed from the change in colour during the phase inversion and as also proven from the characterization analyses. Incorporation of the TA/PVP assembly leads to enhanced surface hydrophilicity by lowering the contact angle from 82° to 47°. In situ assembly of the TA/PVP complex also leads to enhanced clean water permeability by a factor of four as a result of enhanced mean flow pore size from 0.2 to 0.9 µm. Owing to enhanced surface chemistry and structural advantages, the optimum hydrophilic PVDF/TA/PVP membrane poses permeability of 540.18 L/(m2 h bar) for oil/water emulsion filtration, three times higher than the pristine PVDF membrane used as the reference.

Matched MeSH terms: Povidone
Fulltext Antimicrobial effects of natural eye drop containing virgin coconut oil

Hanini ‘Aina, Nik Nur Shamiha Nik Dzulkefli, Mohamed Rasny, Samer Al-Dhalli, Mohd Nizam, Eddy Yusuf, et al.

Journal of Optometry, Eye and Health Research, 2020;2(1):68-74.
MyJurnal

The composition of ophthalmic preparation is administered topically to the eye in the form of a solution, suspension, ointment, gel or foam for the purpose of treating eye disease. Virgin Coconut Oil (VCO) has been one of the desired ingredients of choice, as its benefits as functional food oil is known among the public. The uniqueness of coconut oil is its fats and oils that contain the highest percentage of medium-chain fatty acids (MCFA), which have antimicrobial properties, such as lauric acid and capric acid. This study aimed to evaluate the antimicrobial effects of eye drop containing a different VCO concentration using the Kirby-Bauer test. The formulation of eye drop had 1.5%, 2% and 3% amount of virgin coconut oil, which was later added with all basic materials needed for eye drop. The samples were evaluated for its zone of inhibition (ZOI). The antimicrobial effects of eye drop formulation that contains 3% of VCO (F3) against Streptococcus pneumonia were similar with all control products (Eye Glo, Pred Forte, Cationorm), and antimicrobial effects of F3 against Staphylococcus aureus are better than Cationorm. It is noticeable that the higher the VCO content in the formulation, the better the antimicrobial effects of the eye drop. In conclusion, VCO possesses moisture, anti-inflammation, better anti-microbial properties, and it could be further formulated as a stable eye drop emulsion.

Matched MeSH terms: Povidone
Fulltext Unique Halloysite Nanotubes⁻Polyvinyl Alcohol⁻Polyvinylpyrrolidone Composite Complemented with Physico⁻Chemical Characterization

Gaaz TS, Kadhum AAH, Michael PKA, Al-Amiery AA, Sulong AB, Nassir MH, et al.

Polymers (Basel), 2017 Jun 06;9(6).
PMID: 30970887 DOI: 10.3390/polym9060207

A halloysite nanotubes⁻polyvinyl alcohol⁻polyvinylpyrrolidone (HNTs⁻PVA⁻PVP) composite has been investigated for a quite long time aiming at improving the physico⁻chemical characterization of HNTs. In this work, HNTs⁻PVA⁻PVP composite were prepared based on a unique procedure characterized by crosslinking two polymers with HNTs. The composite of two polymers were modified by treating HNTs with phosphoric acid (H₃PO₄) and by using malonic acid (MA) as a crosslinker. The composite was also treated by adding the dispersion agent sodium dodecyl sulfate (SDS). The HNTs⁻PVA⁻PVP composite shows better characteristics regarding agglomeration when HNTs is treated in advance by H₃PO₄. Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), transmission electron microscopy (TEM), field emission scanning electron microscopy (FESEM), brunauer⁻emmett⁻teller (BET), size distribution, and atomic force microscopy (AFM) are used to characterize the physio-chemical properties of the composite. FTIR shows additional peaks at 2924.29, 1455.7, and 682.4 cm-1 compared to the neat HNTs due to adding MA. Despite that, the XRD spectra do not show a significant difference, the decrease in peak intensity could be attributed to the addition of semi-crystalline PVA and the amorphous PVP. The images taken by TEM and FESEM show the possible effects of MA on the morphology and internal feature of HNTs⁻PVA⁻PVP composite treated by MA by showing the deformation of the matrix. The BET surface area increased to 121.1 m²/g compared to the neat HNTs at 59.1 m²/g. This result, the second highest recorded result, is considered a breakthrough in enhancing the properties of HNTs⁻PVA⁻PVP composite, and treatment by MA crosslinking may attribute to the size and the number of the pores. The results from these techniques clearly showed that a significant change has occurred for treated HNTs⁻PVA⁻PVP composite where MA was added. The characterization of HNTs⁻PVA⁻PVP composite with and without treating HNTs and using crosslinker may lead to a better understanding of this new composites as a precursor to possible applications in the dentistry field.

Matched MeSH terms: Povidone
Fulltext The Impact of Polyvinylpyrrolidone on Properties of Cadmium Oxide Semiconductor Nanoparticles Manufactured by Heat Treatment Technique

Al-Hada NM, Saion E, Talib ZA, Shaari AH

Polymers (Basel), 2016 Apr 08;8(4).
PMID: 30979222 DOI: 10.3390/polym8040113

Cadmium oxide semiconductor nanoparticles were produced using a water based mixture, incorporating cadmium nitrates, polyvinyl pyrrolidone (PVP), and calcination temperature. An X-ray diffraction (XRD) evaluation was conducted to determine the degree of crystallization of the semiconductor nanoparticles. In addition, scanning electron microscopy (SEM) was conducted to identify the morphological features of the nanoparticles. The typical particle sizes and particle dispersal were analyzed via the use of transmission electron microscopy (TEM). The findings provided further support for the XRD outcomes. To determine the composition phase, Fourier transform infrared spectroscopy (FT-IR) was conducted, as it indicated the existence of not only metal oxide ionic band in the selection of samples, but also the efficient removal of organic compounds following calcinations. The optical characteristics were demonstrated, so as to analyze the energy band gap via the use of a UV⁻Vis spectrophotometer. A reduced particle size resulted in diminution of the intensity of photoluminescence, was demonstrated by PL spectra. Plus, the magnetic characteristics were examined using an electron spin resonance (ESR) spectroscopy, which affirmed the existence of unpaired electrons.

Matched MeSH terms: Povidone
Chlorhexidine-alcohol versus povidone-iodine for skin preparation before elective cesarean section: a prospective observational study

Elshamy E, Ali YZA, Khalafallah M, Soliman A

J Matern Fetal Neonatal Med, 2020 Jan;33(2):272-276.
PMID: 30021481 DOI: 10.1080/14767058.2018.1489533

Introduction: The ideal antiseptic agent for skin preparation before elective cesarean section (CS) is not yet determined. The aim of the study was to assess the impact of skin preparation by chlorhexidine-alcohol compared with povidone-iodine before elective CS on the rate of surgical site infection (SSI).Materials and methods: This prospective observational study included a total of 1424 pregnant women at term who were candidates for the elective CS and were divided into two equal groups of 712 patients in each, group 1 (chlorhexidine-alcohol group) and group 2 (povidone-iodine group). Patients were followed up at 1 week and 1 month postoperative to determine the rate of SSI.Results: The rate of SSI was 3.7% (26 patients) in the chlorhexidine-alcohol group compared with 4.6% (33 patients) in the povidone-iodine group (odds ratio: 0.7798, 95% CI: 0.46-1.3, p = .35), nine patients in the chlorhexidine-alcohol group, and 10 patients in the povidone-iodine group required resuturing (odds ratio: 0.9, 95% CI: 0.36-2.2, p = .82). Four patients (0.56%) in the chlorhexidine-alcohol group and five patients (0.7%) in the povidone-iodine group developed endometritis (p = .74). The rate or readmission because of SSI was 2.7% (19 patients) in the chlorhexidine-alcohol group and 2.9% (21 patients) in the povidone-iodine group (p = .75).Conclusions: Skin preparation with either chlorhexidine-alcohol or povidone-iodine resulted in comparable rates of SSIs. Accordingly, both are suitable antiseptic agents for skin preparation before elective CS.

Matched MeSH terms: Povidone-Iodine
Fulltext Enucleation in a Cownose Ray (Rhinoptera bonasus)

Abraham Gabriel A, Yee-Nin ST, Adamu L, Hassan HMD, Wahid AH

Case Rep Vet Med, 2018;2018:5048948.
PMID: 29955436 DOI: 10.1155/2018/5048948

Trauma is a common problem in Cownose Ray during mating season in both wild and captive rays. Enucleation is indicated when there is an ocular trauma. A 5-year-old female Cownose Ray (Rhinoptera bonasus) from Aquaria of Kuala Lumpur Convention Centre (KLCC) was presented to University Veterinary Hospital (UVH), Universiti Putra Malaysia, with a complaint of protruding left eye, which resulted from crushing into artificial coral during mating season. There were a hyphema in the traumatic left eye, periorbital tissue tear, exposed left eye socket, and multiple abrasions on both pectoral fins. The Cownose was anaesthetized and maintained with isoeugenol and on-field emergency enucleation of the left eye was performed. It was managed medically with postoperative enrofloxacin, tobramycin ointment, and povidone iodine. No suture breakdown and secondary infection were observed at day 7 after enucleation during revisit. At day 24 after enucleation, the Cownose responded well to treatment with excellent healing progression and no surgical complication was observed.

Matched MeSH terms: Povidone-Iodine

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links