Displaying publications 4561 - 4580 of 8505 in total

Abstract:
Sort:
  1. Chang LS, Lau KQ, Tan CP, Yusof YA, Nyam KL, Pui LP
    Acta Sci Pol Technol Aliment, 2021 11 2;20(4):417-421.
    PMID: 34724366 DOI: 10.17306/J.AFS.0903
    BACKGROUND: ‘Kedondong’ fruit is regarded as an exotic fruit that is gaining popularity due to its deliciousness and pleasant flavour. However, this fruit has a short shelf life, leading to problems with postharvest loss. In order to prevent losses, the fruit could be produced as a value-added product. In this study, the ‘kedondong’ fruit was preserved by drying into powder using different drying methods.

    METHODS: The kedondong powder was dried using five methods: convection oven drying, vacuum drying, spray drying, drum drying and freeze drying. The physical properties, flowability and DPPH radical scavenging ability of dried kedondong powder were examined.

    RESULTS: Spray-dried powder provided the significantly (p ≤ 0.05) highest process yield, which was 54.93%. All the powder produced had a low moisture content (3.03 to 5.66%) and water activity (0.19–0.37). Visually, whitish and fine powders were observed on spray-dried and freeze-dried samples, while convection oven-dried and vacuum-dried powder appeared yellowish and coarse. The pH of the reconstituted powders varied from 2.71 to 2.83, where drum-dried powder was the most acidic. Spray-dried powder showed the highest wettability and shortest dissolution time, which was 172.65 s and 10.55 s, respectively. With the exception of drum-dried powder, all the dried powders were classified as non-caking powders. The bulk and tapped density of the powders ranged from 0.32 to 0.70 g/mL and 0.38 to 0.86 g/mL, respectively. Vacuum-dried powder had very good flowability, convection oven-dried and drum-dried powder had good flowability, while spray-dried and drum-dried powder had fair flowability. Antioxidant assay showed that freeze-dried powder exhibited the highest free radical scavenging activity (IC50 = 701.29 μg/mL).

    CONCLUSIONS: This study indicates that spray-dried kedondong powder has great potential in the food industry due to its high process yield and better powder quality. Meanwhile, freeze drying best preserved the antioxidant properties of the powder, which could potentially be used as a functional ingredient as a result. This study is important for the fruit processing industry as it offers an alternative for the farmer to produce kedondong fruit powder because the fruit has a short shelf life. Converting the fruit into powder can diversify the resulting produce into different applications, such as fruit juice, beverages, jam and other food products.

  2. Budiman F, Tan WK, Kawamura G, Muto H, Matsuda A, Abdul Razak K, et al.
    ACS Omega, 2021 Oct 26;6(42):28203-28214.
    PMID: 34723018 DOI: 10.1021/acsomega.1c04280
    Coral-like and nanowire (NW) iron oxide nanostructures were produced at 700 and 800 °C, respectively, through thermal oxidation of iron foils in air- and water vapor-assisted conditions. Water vapor-assisted thermal oxidation at 800 °C for 2 h resulted in the formation of highly crystalline α-Fe2O3 NWs with good foil surface coverage, and we propose that their formation was due to a stress-driven surface diffusion mechanism. The Cr(VI) adsorption property of an aqueous solution on α-Fe2O3 NWs was also evaluated after a contact time of 90 min. The NWs had a removal efficiency of 97% in a 225 mg/L Cr(VI) solution (pH 2, 25 °C). The kinetic characteristic of the adsorption was fitted to a pseudo-second-order kinetic model, and isothermal studies indicated that the α-Fe2O3 NWs exhibited an adsorption capacity of 66.26 mg/g. We also investigated and postulated a mechanism of the Cr(VI) adsorption in an aqueous solution of α-Fe2O3 NWs.
  3. Li X, Liu YJ, Nian BB, Cao XY, Tan CP, Liu YF, et al.
    Food Chem, 2022 Mar 30;373(Pt B):131285.
    PMID: 34740049 DOI: 10.1016/j.foodchem.2021.131285
    The digestion behavior of epoxy triglyceride, the main cytotoxic product of deep-frying oil, remains unknown, which may affect its biosafety. In this study, epoxy triglyceride (EGT) and triglyceride (GT) were used to reveal the effect of epoxy group on digestion. Digestibility rate analysis showed that the free fatty acids release rate of EGT was slower. To clarify this phenomenon, binding ability with salt ions in digestive juice and particle size were also been studied. Cluster size analysis indicated that epoxy group increased triglyceride particle size, resulting in smaller contact area between EGT and lipase. Interface behaviors displayed EGT decreased binding ability with salt ions in digestive juice. Spectroscopic analysis showed EGT caused the red shift of lipase peak, indicating that epoxy group changed lipase structure. Molecular dynamics simulation suggested EGT leads to loosen lipase structure. In conclusion, this study highlights that epoxy group could weaken the triglyceride digestion.
  4. Tan LP, Sadiq M, Aldeehani TM, Ehsanullah S, Mutira P, Vu HM
    Environ Sci Pollut Res Int, 2022 Apr;29(18):26322-26335.
    PMID: 34853996 DOI: 10.1007/s11356-021-17774-y
    This paper investigates the effect of different categories of essential COVID-19 data from 2020 to 2021 towards stock price dynamics and options markets. It applied the hypothetical method in which investors develop depression based on the understanding suggested by various green finance divisions. Furthermore, additional elements like panic, sentiment, and social networking sites may impact the attitude, size, and direction of green finance, subsequently impacting the security prices. We created new emotion proxies based on five groups of information, namely COVID-19, marketplace, lockdown, banking sector, and government relief using Google search data. The results show that (1) if the proportional number of traders' conduct exceeds the stock market, the effect of sentimentality indexes on jump volatility is expected to change; (2) the volatility index component jump radically increases with the COVID-19 index, city and market lockdown index, and banking index; and (3) expanding the COVID-19 index gives rise to the stock market index. Moreover, all indexes decreased in jump volatility but only after 5 days. These findings comply with the hypotheses proposed by our model.
  5. Payus AO, Jeffree MS, Ohn MH, Tan HJ, Ibrahim A, Chia YK, et al.
    Neurol Sci, 2021 Dec 01.
    PMID: 34853897 DOI: 10.1007/s10072-021-05785-z
    INTRODUCTION: The novel Coronavirus Disease 2019 (COVID-19) is an infection caused by the Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) which has been spreading rapidly amongst humans and causing a global pandemic. The notorious infection has shown to cause a wide spectrum of neurological syndrome, including autoimmune encephalitis.

    OBJECTIVE: Here, we systematically review the literature on autoimmune encephalitis that developed in the background of SARS-CoV-2 infections and also the possible pathophysiological mechanisms of auto-immune mediated damage to the nervous system.

    METHODOLOGY: An exhaustive search was made in Medline/PubMed, Embase, Scopus and other medical databases, and 28 relevant published articles were selected according to the strict inclusion criteria.

    RESULTS: Autoimmune encephalitis can occur via three possible proposed pathophysiological mechanism and can manifest during or after the acute infection period. It is more common in adult but can also occur in the paediatric patients. There were various spectra of autoantibody panels reported including antineuronal antibody, anti-gangliosides antibody and onconeural antibody. Majority of the patients responded well to the immunomodulating therapy and achieved good recovery.

    CONCLUSION: In conclusion, SARSCoV-2 infection can induce various spectrum of autoimmune encephalitis. It is a major concern since there is very limited long-term study on the topic. Hence, this review aims to elucidate on the potential long-term complication of SARS-CoV-2 infection and hopefully to improve the management and prognosis of COVID-19.

  6. Lim PC, Rajah R, Lee CY, Wong TY, Tan SSA, Karim SA
    Rev Diabet Stud, 2021 Nov 01;17(2):82-89.
    PMID: 34852899 DOI: 10.1900/RDS.2021.17.82
    OBJECTIVE: Recognition of patient baseline knowledge is important in educating patients with type 2 diabetes mellitus (T2D) to manage their disease effectively. The purpose of this study is to review current evidence on the level of diabetes knowledge among T2D patients and determine factors affecting their knowledge. METHODS: A systematic search of English language articles published between 1990 and June 2019 was conducted using six electronic databases. Only quantitative studies that assessed knowledge of T2D patients in Southeast Asian countries were included. Data were extracted and a meta-analysis was conducted. RESULTS: A total of 6210 articles were retrieved; seven articles met the inclusion criteria, comprising 1,749 T2D patients. The calculated mean knowledge score was 55.6% (95% CI: 7.6 to 103.6). Five types of assessment tools were identified ranging from five to 41 questions that focused on disease specifics, treatment, and nutrition. Age, education level, and glycemic control were the most common factors impacting knowledge. CONCLUSIONS: The level of knowledge among T2D patients in Southeast Asia was unsatisfactory, especially in older patients with low education levels and poor glycemic control. Hence, an appropriate educational plan should be prioritized to these groups.
  7. Lai SK, Tan LJ, Hussin H, Salleh AA, Bakrin IH
    Clin Case Rep, 2021 Nov;9(11):e04639.
    PMID: 34849222 DOI: 10.1002/ccr3.4639
    HIV-infected patients are at high risk of multiple pathologies. Accurate identification of multiple colesional pathologies is critical for the patient management. We report a distinctive case of colesional cutaneous talaromycosis and Kaposi sarcoma. Prudent histopathological examination and judicious use of adjunct diagnostic test are essential for the diagnosis.
  8. Ong JH, Koh JA, Cao H, Tan SA, Abd Manan F, Wong FC, et al.
    Antioxidants (Basel), 2021 Nov 17;10(11).
    PMID: 34829693 DOI: 10.3390/antiox10111822
    Corn silk (CS) is an agro-by-product from corn cultivation. It is used in folk medicines in some countries, besides being commercialized as health-promoting supplements and beverages. Unlike CS-derived natural products, their bioactive peptides, particularly antioxidant peptides, are understudied. This study aimed to purify, identify and characterize antioxidant peptides from trypsin-hydrolyzed CS proteins. Purification was accomplished by membrane ultrafiltration, gel filtration chromatography, and strong-cation-exchange solid-phase extraction, guided by 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt radical cation (ABTS•+) scavenging, hydrogen peroxide scavenging, and lipid peroxidation inhibition assays. De novo sequencing identified 29 peptides (6-14 residues; 633-1518 Da). The peptides consisted of 33-86% hydrophobic and 10-67% basic residues. Molecular docking found MCFHHHFHK, VHFNKGKKR, and PVVWAAKR having the strongest affinity (-4.7 to -4.8 kcal/mol) to ABTS•+, via hydrogen bonds and hydrophobic interactions. Potential cellular mechanisms of the peptides were supported by their interactions with modulators of intracellular oxidant status: Kelch-like ECH-associated protein 1, myeloperoxidase, and xanthine oxidase. NDGPSR (Asn-Asp-Gly-Pro-Ser-Arg), the most promising peptide, showed stable binding to all three cellular targets, besides exhibiting low toxicity, low allergenicity, and cell-penetrating potential. Overall, CS peptides have potential application as natural antioxidant additives and functional food ingredients.
  9. Amelia-Yap ZH, Tan TK, Prakash BK, Chen CD, Sofian-Azirun M, Low VL
    J Vector Borne Dis, 2020 10 1;57(4):359-361.
    PMID: 34856717 DOI: 10.4103/0972-9062.313959
  10. Tan SX, Andriyana A, Lim S, Ong HC, Pang YL, Ngoh GC
    Polymers (Basel), 2021 Dec 15;13(24).
    PMID: 34960953 DOI: 10.3390/polym13244398
    The present study was conducted to optimize the extraction yield of starch from sago (Metroxylon sagu) pith waste (SPW) with the assistance of ultrasound ensued by the transformation of extracted starch into a higher value-added bioplastic film. Sago starch with extraction yield of 71.4% was successfully obtained using the ultrasound-assisted extraction, with the following conditions: particle size <250 µm, solid loading of 10 wt.%, ultrasonic amplitude of 70% and duty cycle of 83% in 5 min. The rapid ultrasound approach was proven to be more effective than the conventional extraction with 60.9% extraction yield in 30 min. Ultrasound-extracted starch was found to exhibit higher starch purity than the control starch as indicated by the presence of lower protein and ash contents. The starch granules were found to have irregular and disrupted surfaces after ultrasonication. The disrupted starch granules reduced the particle size and increased the swelling power of starch which was beneficial in producing a film-forming solution. The ultrasound-extracted sago starch was subsequently used to prepare a bioplastic film via solution casting method. A brownish bioplastic film with tensile strength of 0.9 ± 0.1 MPa, Young's modulus of 22 ± 0.8 MPa, elongation at break of 13.6 ± 2.0% and water vapour permeability (WVP) of 1.11 ± 0.1 × 10-8 g m-1 s-1 Pa-1 was obtained, suggesting its feasibility as bioplastic material. These findings provide a means of utilization for SPW which is in line with the contemporary trend towards greener and sustainable products and processes.
  11. Wong YP, Chia WK, Selimin A, Chia PY, Mustangin M, Shuib S, et al.
    Malays J Pathol, 2021 Dec;43(3):341-351.
    PMID: 34958055
    INTRODUCTION: Hydatidiform moles (HMs) include complete and partial moles, are the result of abnormal fertilisation. The accurate classification of HMs and its distinction from non-molar specimens is utmost important for clinical management and risk assessment. It is diagnostically challenging if the distinction is based solely on histomorphology with poor interobserver reproducibility, especially in early gestations. This study aimed to investigate the diagnostic ability of combined p57 immunohistochemistry and DNA ploidy analysis to distinguish between complete moles, partial moles and non-molar abortus.

    MATERIALS AND METHODS: We included all HMs cases diagnosed in our centre over a six-year period. p57 immunohistochemistry stain was performed. Only nuclear immunoreactivity in >50% of cytotrophoblasts and villous stromal cells was regarded as positive for p57. DNA ploidy status was determined by fluorescence in situ hybridisation. A total of 250 cells from five chorionic villi were counted and were scored as diploid or triploid if more than 10% of nuclei demonstrated two or three signals, respectively.

    RESULTS: A total of 51 cases originally diagnosed by histomorphology as complete mole (n = 18), partial mole (n = 24) and non-molar abortus (n = 9) were recruited. The cases were reclassified based on the p57 immunostaining pattern and DNA ploidy status, into 27 complete moles (p57-/diploid), 9 partial moles (p57+/triploid) and 15 non-molar abortus (p57+/diploid). The diagnostic accuracy by histomorphological features alone in each category: complete moles, partial moles and non-molar abortus was 78.4%, 70.6% and 88.2% respectively.

    CONCLUSION: This study highlighted the importance of the utility of combined p57 immunostain and DNA ploidy analysis in arriving at an accurate diagnosis in HMs. An algorithmic approach utilising these ancillary techniques is advocated in routine diagnostic workup for a more refined diagnostic approach to HMs.

  12. Abdul Aziz NFH, Abbasiliasi S, Abu Zarin M, Ng HS, Lan C, Tan JS
    PeerJ, 2021;9:e11920.
    PMID: 34963820 DOI: 10.7717/peerj.11920
    Background: Current advances in biotechnology have been looked at as alternative approaches towards the limited product recovery due to time- and cost-consuming drawbacks on the conventional purification methods. This study aimed to purify bovine serum albumin (BSA) as an exemplary target product using an aqueous impregnated resin system (AIRS). This method implies the concept of hydrophobicity of polymer that impregnated into the resins and driven by electrostatic attractions and hydrophilicity of aqueous salt solution to extract the target product.

    Methods: The extraction behaviors of impregnation in terms of stability and adsorption kinetics via protein-aqueous polymer impregnated resin were studied. Impregnation stability was determined by the leaching factor of polyethylene glycol (PEG). The major factors such as PEG molecular weights and concentration, pH of aqueous salt solution, extraction methods (sonication and agitation) and types of adsorbent material and concentration of aqueous salt phase influencing on partitioning of biomolecule were also investigated.

    Results: For impregnation stability, the leaching factor for Amberlite XAD4 did not exceed 1%. The scanning electron microscopy (SEM) image analysis of Amberlite XAD4 attributes the structural changes with impregnation of resins. For adsorption kinetics, Freundlich adsorption isotherm with the highest R2 value (0.95) gives an indication of favorable adsorption process. Performance of AIRS impregnated with 40% (w/w) of PEG 2000 was found better than aqueous-two phase system (ATPS) by yielding the highest recovery of BSA (53.72%). The outcomes of this study propound the scope for the application of AIRS in purification of biomolecules.

  13. Roy Chong JW, Tan X, Khoo KS, Ng HS, Jonglertjunya W, Yew GY, et al.
    Environ Res, 2022 Apr 15;206:112620.
    PMID: 34968431 DOI: 10.1016/j.envres.2021.112620
    Global demand for plastic materials has severely harm the environment and marine sea life. Therefore, bioplastics have emerged as an environmentally friendly alternative due to sustainability, minimal carbon footprint, less toxicity and high degradability. This review highlights the sustainable and environmentally friendly approach towards bioplastic production by utilizing microalgae as a feed source in several ways. First, the microalgae biomass obtained through the biorefinery approach can be processed into PHA under certain nutrient limitations. Additionally, microalgae biomass can act as potential filler and reinforcement towards the enhancement of bioplastic either blending with conventional bioplastic or synthetic polymer. The downstream processing of microalgae via suitable extraction and pre-treatment of bioactive compounds such as lipids and cellulose are found to be promising for the production of bioplastics. Moving on, the intermediate processing of bioplastic via lactic acid synthesized from microalgae has favoured the microwave-assisted synthesis of polylactic acid due to cost efficiency, minimum solvent usage, low energy consumption, and fast rate of reaction. Moreover, the reliability and effectiveness of microalgae-based bioplastics are further evaluated in terms of techno-economic analysis and degradation mechanism. Future improvement and recommendations are listed towards proper genetic modification of algae strains, large-scale biofilm technology, low-cost cultivation medium, and novel avocado seed-microalgae bioplastic blend.
  14. Fung CM, Er CC, Tan LL, Mohamed AR, Chai SP
    Chem Rev, 2022 Feb 09;122(3):3879-3965.
    PMID: 34968051 DOI: 10.1021/acs.chemrev.1c00068
    Photocatalysis is a perennial solution that promises to resolve deep-rooted challenges related to environmental pollution and energy deficit through harvesting the inexhaustible and renewable solar energy. To date, a cornucopia of photocatalytic materials has been investigated with the research wave presently steered by the development of novel, affordable, and effective metal-free semiconductors with fascinating physicochemical and semiconducting characteristics. Coincidentally, the recently emerged red phosphorus (RP) semiconductor finds itself fitting perfectly into this category ascribed to its earth abundant, low-cost, and metal-free nature. More notably, the renowned red allotrope of the phosphorus family is spectacularly bestowed with strengthened optical absorption features, propitious electronic band configuration, and ease of functionalization and modification as well as high stability. Comprehensively detailing RP's roles and implications in photocatalysis, this review article will first include information on different RP allotropes and their chemical structures, followed by the meticulous scrutiny of their physicochemical and semiconducting properties such as electronic band structure, optical absorption features, and charge carrier dynamics. Besides that, state-of-the-art synthesis strategies for developing various RP allotropes and RP-based photocatalytic systems will also be outlined. In addition, modification or functionalization of RP with other semiconductors for promoting effective photocatalytic applications will be discussed to assess its versatility and feasibility as a high-performing photocatalytic system. Lastly, the challenges facing RP photocatalysts and future research directions will be included to propel the feasible development of RP-based systems with considerably augmented photocatalytic efficiency. This review article aspires to facilitate the rational development of multifunctional RP-based photocatalytic systems by widening the cognizance of rational engineering as well as to fine-tune the electronic, optical, and charge carrier properties of RP.
  15. Lau YS, Tan LK, Chan CK, Chee KH, Liew YM
    Phys Med Biol, 2021 Dec 31;66(24).
    PMID: 34911053 DOI: 10.1088/1361-6560/ac4348
    Percutaneous coronary intervention (PCI) with stent placement is a treatment effective for coronary artery diseases. Intravascular optical coherence tomography (OCT) with high resolution is used clinically to visualize stent deployment and restenosis, facilitating PCI operation and for complication inspection. Automated stent struts segmentation in OCT images is necessary as each pullback of OCT images could contain thousands of stent struts. In this paper, a deep learning framework is proposed and demonstrated for the automated segmentation of two major clinical stent types: metal stents and bioresorbable vascular scaffolds (BVS). U-Net, the current most prominent deep learning network in biomedical segmentation, was implemented for segmentation with cropped input. The architectures of MobileNetV2 and DenseNet121 were also adapted into U-Net for improvement in speed and accuracy. The results suggested that the proposed automated algorithm's segmentation performance approaches the level of independent human obsevers and is feasible for both types of stents despite their distinct appearance. U-Net with DenseNet121 encoder (U-Dense) performed best with Dice's coefficient of 0.86 for BVS segmentation, and precision/recall of 0.92/0.92 for metal stent segmentation under optimal crop window size of 256.
  16. He M, Nian B, Shi J, Sun X, Du R, Tan CP, et al.
    Food Funct, 2022 Jan 04;13(1):270-279.
    PMID: 34888592 DOI: 10.1039/d1fo01507a
    Extraction technology can influence the vegetable oil functional quality. Polyphenols in rapeseed oil have been proved to be beneficial for cardiovascular health. In this study, we evaluated the effect of extraction methods on the functional quality of rapeseed oil from the perspective of phenolic compounds. The results showed that hot pressing produces the highest amount of phenolic compounds in rapeseed oil. Its most abundant phenolic compound, sinapine (9.18 μg g-1), showed the highest activity in inhibiting anaerobic choline metabolism with an EC50 value of 1.9 mM, whose downstream products are related to cardiovascular diseases. Molecular docking and molecular dynamics (MD) simulations revealed that sinapine exhibits good binding affinity toward CutC, and CutC-sinapine is a stable complex with fewer conformational fluctuations and similar tightness. Taken together, hot pressing can be considered the best extraction method for rapeseed oil from the perspective of phenolic compounds.
  17. Deng L, Wang S, Guo H, Liu X, Zou X, Zhang R, et al.
    Int Immunopharmacol, 2022 Feb;103:108501.
    PMID: 34974400 DOI: 10.1016/j.intimp.2021.108501
    Bambuterol (BMB) has been used clinically to treat asthma due to its bronchodilation activity. However, the effect of BMB on ulcerative colitis (UC) has not been examined. The present work focused on the effects of enantiomeric BMB on UC. Acute UC was induced in mice by 3% dextran sulfate sodium (DSS), and (R)-, (S) and (RS)-BMB were orally administered. Body weight loss and the disease activity index (DAI) were measured once a day. Inflammatory factors were detected by ELISA and qRT-PCR. Histological evaluations of colon samples were performed. IL-6, STAT3, and RORγt pathway-related proteins were analyzed by western blotting. The results verified that colitis severity was dramatically ameliorated by (R)-BMB, which was significantlybetter than the effect of (RS)-BMB or (S)-BMB, as evidenced by body weight loss, DAI, colon length, spleen/body weight ratio and histopathological manifestations. Furthermore, (R)-BMB treatment significantly diminished the levels of inflammatory cytokines and macrophages infiltration in mice with colitis. Besides, treated with (R)-BMB obviously elevated the level of β2AR. In addition, (R)-BMB decreased the expression of IL-6, IL-17, retinoic acid receptor-related orphan receptor-gamma t (RORt), and phosphorylated STAT3 (p-STAT3) in a dose-dependent manner in the colon tissues. The efficacy of (R)-BMB was more notable than aminosalicylic acid (5-ASA). (R)-BMB is either butyrilcholinesterase inhibitor or β2AR agonist which offers new treatment of colitis.
  18. Chao WQ, Azman MZ, Rosdi SA, Tuan-Mustafa T, Tan YJ, Abdullah S, et al.
    Malays Orthop J, 2021 Nov;15(3):84-90.
    PMID: 34966500 DOI: 10.5704/MOJ.2111.013
    Introduction: Distal radial fracture is a commonly encountered fracture. This study aims to study the epidemiology of distal radial fracture and factors affecting the patients' functional outcome one to two years after the injury.

    Materials and methods: This is a retrospective cohort study. The records of patients, fulfilling the radiographical diagnosis of distal radial fracture, and aged 18 and above, who presented to our Emergency Department from 1st January 2018 to 31st December 2018 were retrieved. According to AO classification, we grouped our patients into A (extra-articular), B (partial articular) and C (complete articular). Patients with congenital abnormalities were excluded. Epidemiological data and relevant medical history were obtained and tabulated. A Malaysian language translation of Disability of the Arm, Shoulder and Hand (DASH) questionnaire was used to assess the functional outcome.

    Results: Out of 168 patients' data retrieved, only 110 patients' data were found complete for purposes of this study. The mean DASH score was 13.7 ± 7.87 approximately one to two years post-injury regardless of treatment method. Increasing age was associated with higher DASH score with r=0.407(p<0.001). Several variables had significantly better functional outcome: male gender (p=0.01), Type A fracture configuration (p=0.007) and non-operational treatment (p=0.03). There was no significant difference between treatment modalities in Type A fracture (p=0.094), but Type B (p=0.043) and Type C (p=0.007) had better outcome without surgery. There was no significant difference between different ethnic groups, open or closed fracture and mechanism of injury.

    Conclusion: Better functional outcome after sustaining distal radial fracture was associated with young age, male gender, type A fracture and treated non-operatively. Interestingly, more complex fracture pattern had better functionality were observed without surgery.

Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links