Displaying publications 461 - 480 of 759 in total

Abstract:
Sort:
  1. Aina GQ, Erwanto Y, Hossain M, Johan MR, Ali ME, Rohman A
    J Adv Vet Anim Res, 2019 Sep;6(3):300-307.
    PMID: 31583226 DOI: 10.5455/javar.2019.f348
    Objective: The objective of this study was to employ real-time or quantitative polymerase chain reaction (q-PCR) using novel species specific primer (SSP) targeting on mitochondrial cytochrome-b of wild boar species (CYTBWB2-wb) gene for the identification of non-halal meat of wild boar meat (WBM) in meatball products.

    Materials and Methods: The novel SSP of CYTBWB2-wb was designed by our group using PRIMERQUEST and NCBI software. DNA was extracted using propanol-chloroform-isoamyl alcohol method. The designed SSP was further subjected for validation protocols using DNA isolated from fresh meat and from meatball, which include specificity test, determination of efficiency, limit of detection and repeatability, and application of developed method for analysis of commercially meatball samples.

    Results: The results showed that CYTBWB2-wb was specific to wild boar species against other animal species with optimized annealing temperature of 59°C. The efficiency of q-PCR obtained was 91.9% which is acceptable according to the Codex Allimentarius Commission (2010). DNA, with as low as 5 pg/μl, could be detected using q-PCR with primer of CYTBWB2-wb. The developed method was also used for DNA analysis extracted from meatball samples commercially available.

    Conclusion: q-PCR using CYTBWB2-wb primers targeting on mitochondrial cytochrome-b gene (forward: CGG TTC CCT CTT AGG CAT TT; Reverse: GGA TGA ACA GGC AGA TGA AGA) can be fruitfully used for the analysis of WBM in commercial meatball samples.

    Matched MeSH terms: Software
  2. C W Ahmad CWI, Awang Lukman K, Raja Omar RM, Jeffree MS
    Risk Manag Healthc Policy, 2021;14:803-808.
    PMID: 33658876 DOI: 10.2147/RMHP.S278786
    Background and Aim: Healthcare workers (HCWs) routinely experience occupational blood and body fluid exposure (OBBE), including percutaneous injury and splash exposure to non-intact skin. The objective of this study was to determine the prevalence of OBBE and identify associated risk factors.

    Methods: A cross-sectional study was performed on 334 HCWs at 9 workstations. Data were collected with a self-administered questionnaire that consisted of four parts: sociodemographic variables, work-related information, knowledge about needle stick and sharps injury and splash exposure, and information regarding previous OBBE incidents. The data were analyzed by SPSS version 22.0 software.

    Findings: The prevalence of OBBE was 25.1% (95% confidence interval: 20.6-30.2), mostly due to percutaneous injuries, which were not reported to authorities. The highest proportions were among nurses and those working in the medical ward. Needle recapping practices were associated with almost a four-times higher risk of OBBE compared to no-recapping practices. HCWs who did not have any infection prevention training had a three-times higher risk of OBBE.

    Conclusion: Factors associated with OBBE are unsafe work practices, inadequate infection prevention training, and lack of knowledge regarding blood-borne infection. There is a need for more training and increased awareness about the risks of OBBE to reduce unsafe practices.

    Matched MeSH terms: Software
  3. Mohd Shaiful Ehsan Shalihin, Iskandar Firzada Osman, Muhammad Hapizie Bin Din
    MyJurnal
    Introduction: Long waiting time is a common issue complained by diabetic patients that came for an
    early morning appointment in a health clinic. Therefore, an audit was conducted among diabetic patients in
    a primary care clinic with the aim to assess the patients’ waiting time and to formulate strategies for
    improvement. Methods: This audit was conducted for four weeks using a universal sampling method in
    November 2017. All diabetic patients who attended the clinic during this period were included except those
    who required longer period such as critically ill patients or those who came for repeat medication or
    procedures. The arrival and departure time for each station was captured using the modified waiting time
    slip, which is manually filled at every station. The waiting and consultation time for registration, screening,
    laboratory investigation, diabetic educator, doctor and pharmacy were recorded. The data were entered into
    the statistical software SPSS version 17 for analysis. Results: Results showed that all patients were registered
    within 11.0 minutes (SD=2.52min). Average total waiting time to see a diabetic educator and a doctor was
    20.9 minutes (SD=15.53min) and 33.23 minutes (SD=27.85min), respectively. Average waiting time for other
    stations was less than 10 minutes. Average total time spend in the clinic for a diabetic patient was 107.58
    minutes, which is comparable to a non-diabetic patient. The identified problems were due to the poor
    tracing and filing system. Conclusion: Improvement strategies recommended include enforcing early file
    tracing prior to appointment and providing a checklist for consultation by doctors and diabetic educators.
    Matched MeSH terms: Software
  4. Hashim SM, Idris IB, Sharip S, Bahari R, Jahan N
    Korean J Fam Med, 2021 Mar;42(2):123-131.
    PMID: 32418396 DOI: 10.4082/kjfm.19.0177
    BACKGROUND: The patient's intention to engage in diabetes care is the hallmark of role acceptance as a health manager and implies one's readiness to change. The study aimed to understand the process of having the intention to engage in diabetes care.

    METHODS: A qualitative study using narrative inquiry was conducted at a public primary care clinic. Ten participants with type 2 diabetes of more than a 1-year duration were selected through purposive sampling. In-depth interviews were conducted using a semi-structured protocol guide and were audio-taped. The interviews were transcribed and the texts were analyzed using a thematic approach with the Atlas.ti ver. 8.0 software (Scientific Software Development GmbH, Berlin, Germany).

    RESULTS: Three themes emerged from the analysis. The first theme, "Initial reactions toward diabetes," described the early impression of diabetes encompassing negative emotions, feeling of acceptance, a lack of concern, and low level of perceived efficacy. "Process of discovery" was the second overarching theme marking the journey of participants in finding the exact truth about diabetes and learning the consequences of ignoring their responsibility in diabetes care. The third theme, "Making the right decision," highlighted that fear initiated a decision-making process and together with goal-setting paved the way for participants to reach a turning point, moving toward engagement in their care.

    CONCLUSION: Our findings indicated that fear could be a motivator for change, but a correct cognitive appraisal of diabetes and perceived efficacy of the treatment as well as one's ability are essentially the pre-requisites for patients to reach the stage of having the intention to engage.

    Matched MeSH terms: Software
  5. Nowyannie Willie D. Tamsin, Norah Tuah, Mazalan Sarahintu, Herniza Roxanne Marcus
    Borneo Akademika, 2019;3(1):20-29.
    MyJurnal
    University students are known to have different sleeping schedules. Students’ sleep difficulties will affect their health and their performances in studies. Sleep hygiene is a collection of healthy sleep habits that can improve one’s ability to fall asleep and stay asleep. It is considered to be imperative to treat sleep disturbance especially among university students. The aim of this study is to examine the sleep beliefs among the students of UiTM Sabah based on gender and academic performance. This study was conducted on Diploma students between March and July 2018. The respondents were randomly selected from Diploma students of all faculties in UiTM Sabah: Accounting, Business Management, Public Administration, Science, Planting Industry Management, Hotel Management, and Tourism Management. This paper is based on the Sleep Belief Scale questionnaire to assess the sleep hygiene awareness. Questionnaires were distributed using online survey. Findings of this study were analyzed using SPSS statistical software. The result of findings showed that the Sleep Incompatible Behaviours (drinking coffee, taking sleep medication, smoking before sleep) is the highest contributor of the students’ sleep hygiene and therefore it affects the sleep quality. While the Sleep Wake Cycle Behaviours (going to bed & waking up always at the same hour, going to bed two hours earlier than the habitual hour) and Thoughts and Attitude to Sleep (over thinking before sleep, trying to fall asleep without having a sleep sensation)also contributed to the sleep hygiene of the students but not as high as the Sleep Incompatible Behaviours. Based on the results of the findings, the counseling department of UiTM Sabah may organise an education program to create awareness among students about the intervention and prevention strategies as well as the incorrect beliefs about sleep.
    Matched MeSH terms: Software
  6. Fatemeh Barantalab, Pei-Pei Chong, Cindee Lee, Stephnie Kang Xian Yiau, Kian Meng Chang, Zainina Seman, et al.
    MyJurnal
    Introduction: Drug-resistance is a major hindrance to successful treatment of AML. Current predictive biomarkers are mainly genetic aberrations and insufficient in foretelling treatment outcome in all acute myeloid leukaemia (AML) due to its heterogeneous and aggressive nature. Proteins are stable and reliable. Secreted proteins in AML may have predictive or prognostic values for early intervention. Proteomic studies on AML are few and further investigations will benefit in selection of best markers. The aim of the study was to identify differentially expressed plasma proteins in AML with different treatment outcome. Methods: Two-dimensional electrophoresis (2-DE) technique was utilised to identify proteins differentially expressed in chemo-sensitive/chemo-resistant AML. Plasma and peripheral blood mononuclear cell (PBMC) lysate proteome analysis were performed on six chemo-resistant, four chemo-sensitive and six healthy controls and seven chemo-resistant, three chemo-sensitive and six healthy controls, respectively. Each experiment was conducted in duplicate or triplicate. Images were captured and protein spots detected by software. Differentially expressed protein spots were excised from gel and proteins were identified using LC/MS/MS. Proteins spots that were also detected in healthy controls were excluded. Results: Comparing mean % volume of each spot demonstrated significantly enhanced expression of apoliprotein-E (APO-E) and haptoglobin (HP) (p
    Matched MeSH terms: Software
  7. Shaiqah MR, Salahuddin HM, Afiful Huda AYA, Izzuddin M, Nur Shafiq NIM, Nur Hakimah MA, et al.
    J Pharm Bioallied Sci, 2020 Nov;12(Suppl 2):S703-S706.
    PMID: 33828364 DOI: 10.4103/jpbs.JPBS_249_19
    Introduction: Royal jelly (RJ) has been consumed as food or as a supplement because of its high nutritional and medicinal values. A fresh harvested RJ is yellowish to whitish in color and contains proteins, free amino acids, lipids, vitamins, and sugar. Without proper storage conditions, such as at 4°C, the color of RJ changes to much darker yellow and produces a rancid smell. To prolong its shelf life, RJ is usually mixed with honey. Alginate, a natural and edible polymer derived from seaweed, is commonly used to encapsulate drugs and food due to its ability to form gels by reacting with divalent cations. However, there is a lack of research on the microencapsulation of RJ in alginate using electrospray. The electrospray technique has the advantage in producing consistent size and shape of alginate microbeads under optimum parameters.

    Aim: This research aimed to optimize electrospray-operating parameters in producing alginate-RJ microbeads.

    Materials and Methods: Optimization of alginate-RJ microbeads electrospray parameters was carried out using 24 factorial design with three center points (19 runs). The studied parameters were flow rate, high voltage, nozzle size, and tip-to-collector distance, whereas the responses were particle size, particle size distribution, and sphericity factor. The responses of each run were analyzed using Design-Expert software.

    Results: Nozzle size is a significant parameter that influences the particle size. Flow rate is a significant parameter influencing the sphericity factor.

    Conclusion: Screening of the electrospray-operating parameters paves the way in determining the significant parameters and their design space to produce consistent alginate-RJ microbeads.

    Matched MeSH terms: Software
  8. Kumar A, Jain A, Sayyed MI, Laariedh F, Mahmoud KA, Nebhen J, et al.
    Sci Rep, 2021 Apr 08;11(1):7784.
    PMID: 33833308 DOI: 10.1038/s41598-021-87256-1
    Nuclear radiation shielding capabilities for a glass series 20Bi2O3 - xPbO - (80 - 2x)B2O3 - xGeO2 (where x = 5, 10, 20, and 30 mol%) have been investigated using the Phy-X/PSD software and Monte Carlo N-Particle transport code. The mass attenuation coefficients (μm) of selected samples have been estimated through XCOM dependent Phy-X/PSD program and MCNP-5 code in the photon-energy range 0.015-15 MeV. So obtained μm values are used to calculate other γ-ray shielding parameters such as half-value layer (HVL), mean-free-path (MFP), etc. The calculated μm values were found to be 71.20 cm2/g, 76.03 cm2/g, 84.24 cm2/g, and 90.94 cm2/g for four glasses S1 to S4, respectively. The effective atomic number (Zeff)values vary between 69.87 and 17.11 for S1 or 75.66 and 29.11 for S4 over 0.05-15 MeV of photon-energy. Sample S4, which has a larger PbO/GeO2 of 30 mol% in the bismuth-borate glass, possesses the lowest MFP and HVL, providing higher radiation protection efficiency compared to all other combinations. It shows outperformance while compared the calculated parameters (HVL and MFP) with the commercial shielding glasses, different alloys, polymers, standard shielding concretes, and ceramics. Geometric Progression (G-P) was applied for evaluating the energy absorption and exposure buildup factors at energies 0.015-15 MeV with penetration depths up to 40 mfp. The buildup factors showed dependence on the MFP and photon-energy as well. The studied samples' neutron shielding behavior was also evaluated by calculating the fast neutron removal cross-section (ΣR), i.e. found to be 0.139 cm-1 for S1, 0.133 cm-1 for S2, 0.128 cm-1 for S3, and 0.12 cm-1 for S4. The results reveal a great potential for using a glass composite sample S4 in radiation protection applications.
    Matched MeSH terms: Software
  9. Jadhav KB, Nagraj SK, Arora S
    J Oral Pathol Med, 2020 Nov 21.
    PMID: 33220092 DOI: 10.1111/jop.13134
    BACKGROUND: miRNA is one of the advanced epigenetic molecular markers correlating with lymph node metastasis in patients with Oral squamous cell carcinoma (OSCC). Numerous published papers are showing correlation of miRNA with metastasis. There is a need to analyze and validate such correlation.

    METHOD: English language literature in major databases from the last 20 years was searched using controlled vocabulary and keywords. Strict inclusion and exclusion criteria were followed for selection of studies. The quality assessment was done as per the QUADAS tool 2 by three independent reviewers. The metanalysis was performed by using random effect model. Standardized mean difference (SMD) was considered as the effect measure. Statistical software used was STATA version 13.1.

    RESULTS: With all inclusion and exclusion criteria, eight studies could qualify for metanalysis. The pooled estimate is found to be 0.13 (-0.35, 0.62), P = .585, which is statistically not significant. This indicates that there is a no significant difference in the fold change between metastasis and no metastasis groups. P-value of chi-square statistic for heterogeneity is

    Matched MeSH terms: Software
  10. Marzuki NM, Jaeb MZM, Ban A, Ismail AI, Ali IAH, Razali NM, et al.
    Med J Malaysia, 2020 11;75(6):717-721.
    PMID: 33219183
    BACKGROUND: Regarding the long-term safety issues with the use of inhaled corticosteroids (ICS) and the clinical predominance of dual bronchodilators in enhancing treatment outcomes in chronic obstructive pulmonary disease (COPD), ICS is no longer a "preferred therapy" according to the Global Initiative for Chronic Obstructive Lung Disease except on top of a dual bronchodilator. This has necessitated a change in the current therapy for many COPD patients.

    OBJECTIVE: To determine a standardised algorithm to reassess and personalise the treatment COPD patients based on the available evidence.

    METHODS: A consensus statement was agreed upon by a panel of pulmonologists in from 11 institutes in Malaysia whose members formed this consensus group.

    RESULTS: According to the consensus, which was unanimously adopted, all COPD patients who are currently receiving an ICS-based treatment should be reassessed based on the presence of co-existence of asthma or high eosinophil counts and frequency of moderate or severe exacerbations in the previous 12 months. When that the patients meet any of the aforementioned criteria, then the patient can continue taking ICS-based therapy. However, if the patients do not meet the criteria, then the treatment of patients need to be personalised based on whether the patient is currently receiving long-acting beta-agonists (LABA)/ICS or triple therapy.

    CONCLUSION: A flowchart of the consensus providing a guidance to Malaysian clinicians was elucidated based on evidences and international guidelines that identifies the right patients who should receive inhaled corticosteroids and enable to switch non ICS based therapies in patients less likely to benefit from such treatments.

    Matched MeSH terms: Software Design
  11. Mohd Sulaimi Bin Mohd Sani, Muhammad Syamil Bin Abd Halek, Nur Hanifa Binti Haji Zainul
    MyJurnal
    Since 20th century, the Korean wave has been a phenomenon globally and it has also spread through Malaysia in terms of culture, music, fashion and also food. Study shows that Malaysian is attracted towards Korean cuisine which increases the demand of Korean cuisine. As result, numerous of new business opportunities have raised. Sopoong, IOI City Mall, Putrajaya is one of the top and thriving Korean cuisine restaurant with more than five branches all over Kuala Lumpur and Klang Valley area. The aims of this study are to help the food establishment to improve their service quality and subsequently increase the customer satisfaction, and also could help any other organizations that are interrelated to this research. This research is also purposely to determine the relationship of service quality with customer satisfaction focused at Sopoong, IOI City Mall, Putrajaya. The researchers used the service quality dimension (SERVQUAL) such as tangibility, reliability, responsiveness, assurance and empathy to find the relationship with customer satisfaction as the main idea. This study is a quantitative study conducted to tracks the seasonal trends or phenomena related to the issue. For this research, survey questionnaire was used as data collection method and three hundred and one (301) questionnaires were distributed to respondent at Sopoong, IOI City Mall, Putrajaya. The data collected are analysed by using descriptive and correlation analysis by using IBM-SPSS software. The findings of this study show that the relationship between service quality and customer satisfaction is available.
    Matched MeSH terms: Software
  12. Vanitha Krishnan, Hazreen Abdul Majid, Rafdzah Ahmad Zaki, Muhammad Yazid Jalaludin
    MyJurnal
    Introduction: Anaemia is a significant public health problem among adolescents globally but there is limited data in many countries, including Malaysia. This study aims to investigate the 5-years incidence of anemia among Malaysian adolescents by gender, ethnicity, locality of schools, Body Mass Index, stature and diet intake. Methods: A secondary analysis of existing data from MyHeART study was conducted within a closed cohort of 528 adolescents (aged 13 years) attended 15 public secondary schools from Kuala Lumpur, Selangor and Perak. The adolescents who were followed up at 15 and 17 years old had completed haemoglobin assessment, anthropometric measurements and -days diet history. The data was cleaned and missingness was handled accordingly with multiple imputation. SPSS Software version 21 was used to analyse the data, with Generalised Estimating Equation (GEE) showing the effect of time on the trajectory of prevalence of anaemia over the 5 years. Results: The prevalence or incidence? of anaemia in 2012, 2014 and 2016 was 7.9% (95%CI: 5.0-12.3), 13.9% (95%CI: 10.0-19.0) and 15.8% (95%CI:11.3-21.7). In females, anaemia increased from 11.1% (95%CI:6.7-18.7) to 15.7% (11.4-21.3) and 23.1%(95%CI: 16.8-31.0); the change was significant from 13 to 15 years old. Similar trend was noticed in those who are stunted, overweight/obese, in both urban/rural schools and didn’t meet their daily recommended nutrient intake for total calorie, protein and iron. Conclusion: Anaemia is increasing in trend among the adolescents over the years and deems attention from the relevant stakeholders to create a robust anemia prevention program.
    Matched MeSH terms: Software
  13. Lim HM, Teo CH, Ng CJ, Chiew TK, Ng WL, Abdullah A, et al.
    JMIR Med Inform, 2021 Feb 26;9(2):e23427.
    PMID: 33600345 DOI: 10.2196/23427
    BACKGROUND: During the COVID-19 pandemic, there was an urgent need to develop an automated COVID-19 symptom monitoring system to reduce the burden on the health care system and to provide better self-monitoring at home.

    OBJECTIVE: This paper aimed to describe the development process of the COVID-19 Symptom Monitoring System (CoSMoS), which consists of a self-monitoring, algorithm-based Telegram bot and a teleconsultation system. We describe all the essential steps from the clinical perspective and our technical approach in designing, developing, and integrating the system into clinical practice during the COVID-19 pandemic as well as lessons learned from this development process.

    METHODS: CoSMoS was developed in three phases: (1) requirement formation to identify clinical problems and to draft the clinical algorithm, (2) development testing iteration using the agile software development method, and (3) integration into clinical practice to design an effective clinical workflow using repeated simulations and role-playing.

    RESULTS: We completed the development of CoSMoS in 19 days. In Phase 1 (ie, requirement formation), we identified three main functions: a daily automated reminder system for patients to self-check their symptoms, a safe patient risk assessment to guide patients in clinical decision making, and an active telemonitoring system with real-time phone consultations. The system architecture of CoSMoS involved five components: Telegram instant messaging, a clinician dashboard, system administration (ie, back end), a database, and development and operations infrastructure. The integration of CoSMoS into clinical practice involved the consideration of COVID-19 infectivity and patient safety.

    CONCLUSIONS: This study demonstrated that developing a COVID-19 symptom monitoring system within a short time during a pandemic is feasible using the agile development method. Time factors and communication between the technical and clinical teams were the main challenges in the development process. The development process and lessons learned from this study can guide the future development of digital monitoring systems during the next pandemic, especially in developing countries.

    Matched MeSH terms: Software
  14. Chian TC, Nassir NM, Ibrahim MI, Yusof AK, Sabarudin A
    Quant Imaging Med Surg, 2017 Feb;7(1):48-58.
    PMID: 28275559 DOI: 10.21037/qims.2017.02.02
    BACKGROUND: This study was carried out to quantify and compare the quantitative image quality of coronary computed tomography angiography (CCTA) between genders as well as between different tube voltages scan protocols.

    METHODS: Fifty-five cases of CCTA were collected retrospectively and all images including reformatted axial images at systolic and diastolic phases as well as images with curved multi planar reformation (cMPR) were obtained. Quantitative image quality including signal intensity, image noise, signal-to-noise ratio (SNR) and contrast-to-noise ratio (CNR) of right coronary artery (RCA), left anterior descending artery (LAD), left circumflex artery (LCx) and left main artery (LM) were quantified using Analyze 12.0 software.

    RESULTS: Six hundred and fifty-seven coronary arteries were evaluated. There were no significant differences in any quantitative image quality parameters between genders. 100 kilovoltage peak (kVp) scanning protocol produced images with significantly higher signal intensity compared to 120 kVp scanning protocol (P<0.001) in all coronary arteries in all types of images. Higher SNR was also observed in 100 kVp scan protocol in all coronary arteries except in LCx where 120 kVp showed better SNR than 100 kVp.

    CONCLUSIONS: There were no significant differences in image quality of CCTA between genders and different tube voltages. Lower tube voltage (100 kVp) scanning protocol is recommended in clinical practice to reduce the radiation dose to patient.

    Matched MeSH terms: Software
  15. Tang WS, Chan MW, Kow FP, Ambigapathy R, Wong JHW, Thiruvengadam V, et al.
    Malays Fam Physician, 2021 Mar 25;16(1):75-83.
    PMID: 33948145 DOI: 10.51866/oa1096
    Background: The low detection rate of tuberculosis (TB) cases in Malaysia remains a challenge in the effort to end TB by 2030. The collaboration between private and public health care facilities is essential in addressing this issue. As of now, no private-public health care collaborative program in pulmonary tuberculosis (PTB) screening exists in Malaysia.

    Aim: To determine the feasibility of a collaborative program between private general practitioners (GPs) and the public primary health clinics in PTB screening and to assess the yield of smear-positive PTB from this program.

    Methods: A prospective cohort study using convenient sampling was conducted involving GPs and public health clinics in the North-East District, Penang, from March 2018 to May 2019. In this study, GPs could direct all suspected PTB patients to perform a sputum acid fast bacilli (AFB) direct smear in any of the dedicated public primary health clinics. The satisfaction level of both the GPs and their patients were assessed using a self-administered client satisfaction questionnaire. IBM SPSS Statistical Software was used to analyze the data.

    Results: Out of a total of 31 patients who underwent the sputum investigation for PTB, one (3.2%) was diagnosed to have smear-positive PTB. Most of the patients (>90%) and GPs (66.7%) agreed to continue with this program in the future. Furthermore, most of the patients (>90%) were satisfied with the program structure.

    Conclusion: It is potentially feasible to involve GPs in combating TB. However, a more structured program addressing the identified issues is needed to make the collaborative program a success.

    Matched MeSH terms: Software
  16. Sew YS, Aizat WM, Razak MSFA, Zainal-Abidin RA, Simoh S, Abu-Bakar N
    Data Brief, 2020 Aug;31:105927.
    PMID: 32642524 DOI: 10.1016/j.dib.2020.105927
    The proteome data of whole rice grain is considerably limited particularly for rice with pigmentations such as black and red rice. Hence, we performed proteome analysis of two black rice varieties (BALI and Pulut Hitam 9), two red rice varieties (MRM16 and MRQ100) and two white rice varieties (MR297 and MRQ76) using label-free liquid chromatography Triple TOF 6600 tandem mass spectrometry (LC-MS/MS). Our aim was to profile and identify proteins related to nutritional (i.e. antioxidant, folate and low glycaemic index) and quality (i.e. aromatic) traits based on peptide-centric scoring from the Sequential Window Acquisition of All Theoretical Mass Spectra (SWATH-MS) approach. Both information dependent acquisition (IDA) and SWATH-MS run were performed in this analysis. Raw data was then processed using ProteinPilot software to identify and compare proteins from the six different varieties. In future, this proteomics data will be integrated with previously obtained genomics [1] and transcriptomics [2] data focusing on the above nutritional and quality traits, with an ultimate aim to develop a panel of functional biomarkers related to those traits for future rice breeding programme. The raw MS data of the pigmented and non-pigmented rice varieties have been deposited to ProteomeXchange database with accession number PXD018338.
    Matched MeSH terms: Software
  17. Hakim HM, Khan HO, Ismail SA, Lalung J, Kofi AE, Abdullah MT, et al.
    Data Brief, 2020 Aug;31:105909.
    PMID: 32642519 DOI: 10.1016/j.dib.2020.105909
    This data article provides population frequencies for 21 autosomal and two sex determining short tandem repeat (STR) loci in unrelated Kedayan individuals. This article is related to the research paper entitled "Forensic parameters and ancestral fraction in the Kedayan population inferred using 21 autosomal STR loci" [1] where these same data were subjected to ancestry and forensic analyses. We have collected 200 blood samples consisting of 128 male and 72 female volunteer representatives from Kedayan people residing in various parts of Borneo. All 23 STR loci were simultaneously amplified using Globalfiler™ Express PCR and amplicons were separated using an ABI 3500xl Genetic Analyzer. The STR allele calls at each locus were called using GeneMapperⓇ ID-X Software v1.4, while several algorithms in Arlequin software version 3.5 were used to estimate Hardy-Weinberg equilibrium (HWE) and linkage disequilibrium (LD) between pairs of STR loci.
    Matched MeSH terms: Software
  18. Abdulkader YC, Kamaruddin AF, Mydin RBSMN
    Saudi Dent J, 2020 Sep;32(6):306-313.
    PMID: 32874071 DOI: 10.1016/j.sdentj.2019.09.010
    Objectives: This study compared the effects of normal salivary pH, and acidic pH found in patients with poor oral hygiene, on the durability of aesthetic archwire coated with epoxy resin and polytetrafluoroethylene (PTFE).

    Methods: The posterior parts of the archwires were sectioned into 20 mm segments (N = 102) and divided among six groups. Four groups were treated with different pH levels and two served as controls. The specimens were immersed in individual test tubes containing 10 ml of artificial saliva adjusted to a pH of 6.75 or 3.5. The tubes were sealed and stored in a 37 °C water bath for 28 days. After 28 days, the specimens were ligated to brackets embedded in an acrylic block and subjected to mechanical stress using an electronic toothbrush for 210 s. The specimens were photographed, and images were measured for coating loss using AutoCAD® software. Surface morphology was observed using a scanning electron microscope (SEM).

    Results: Significant coating loss (p 

    Matched MeSH terms: Software
  19. Mohiuddin SG, Aziz S, Iqbal MZ, Naqvi AA, Ahmed R, Mahmoud MA, et al.
    J Pharm Bioallied Sci, 2020 01 29;12(1):57-63.
    PMID: 32801601 DOI: 10.4103/jpbs.JPBS_182_19
    Purpose: The demand of complementary and alternative medicine (CAM) has increased drastically over the past few decades. The perceptions about CAMs among general population are positive. However, the literature highlights that effectiveness and acceptance of alternative therapies among the general population is still a subject of debate.

    Materials and Methods: This is a cross-sectional study and the response along with demographic details was collected through a validated questionnaire; the results were analyzed by using a validated data collection tool. The results were concluded based on good, moderate, and poor responses, which were evaluated through data analysis by using the Statistical Package for the Social Sciences software version 20.0., SPSS Inc., Chicago, III, USA. A value of P < 0.05 was considered statistically significant.

    Results: In total, 182 (44.4%) of male and 228 (55.6%) of female respondents were selected for this study. Studies showed that a greater knowledge level was observed among female respondents (15.55 ± 2.7, P < 0.001). The selected Chinese population had relatively good knowledge (i.e., 15.63, P = 0.006). People practicing Buddhism had also good knowledge. Rural population had lesser family income and showed a good practice pattern and understanding (P = 0.006). The positive attitude was identified among women ( P < 0.001) with a mean score of 15.55 ± 2.7. Postgraduate participants were found to have diverse results with SD ± 6.23, and 77.1% had a good attitude. A statistically significant association was observed between religion and attitude of respondents (P < 0.001).

    Conclusion: Although a better practice was noticed in Malaysian population, more awareness is required and knowledge should be disseminated among the population to improve the overall health and quality of life in Malaysia.

    Matched MeSH terms: Software
  20. Moradpour N, Karimova M, Pourafshary P, Zivar D
    ACS Omega, 2020 Jul 28;5(29):18155-18167.
    PMID: 32743190 DOI: 10.1021/acsomega.0c01766
    The results of many previous studies on low salinity/controlled ions water (CIW) flooding suggest that future laboratory and modeling investigations are required to comprehensively understand and interpret the achieved observations. In this work, the aim is co-optimization of the length of the injected slug and soaking time in the CIW flooding process. Furthermore, the possibility of the occurrence of several governing mechanisms is studied. Therefore, the experimental results were utilized to develop a compositional model, using CMG GEM software, in order to obtain the relative permeability curves by history matching. It was concluded that CIW slug injection, concentrated in the potential-determining ion, can increase oil recovery under a multi ion exchange (MIE) mechanism. The wettability of the carbonate rocks was changed from a mixed or oil wet state toward more water wetness. However, there is a CIW slug length, beyond which extending the length does not significantly improve the rock wettability, and consequently, the oil production, which is known as the optimum slug size. This implies that the optimization of the injection process, by minimizing the slug size, can decrease the need for the CIW supply, therefore lowering the process expenditure. Moreover, if the exposure time of the rock and CIW is increased (soaking), a higher level of ion substitution is probable, leading to more oil detachment and production. Rock dissolution/precipitation (leading to a pH change) was found to have a negligible contribution.
    Matched MeSH terms: Software
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links