Displaying publications 41 - 60 of 233 in total

Abstract:
Sort:
  1. Rice starch thin films as a potential buccal delivery system: Effect of plasticiser and drug loading on drug release profile
    Chan SY, Goh CF, Lau JY, Tiew YC, Balakrishnan T
    Int J Pharm, 2019 May 01;562:203-211.
    PMID: 30904726 DOI: 10.1016/j.ijpharm.2019.03.044
    Rice starch is known to have an excellent film-forming behaviour in the packaging industry but inadequate attention was given to this biopolymer to be developed into thin films for drug delivery. Accordingly, rice starch thin films containing a model drug, paracetamol and plasticisers (glycerol or sorbitol) were developed using film casting technique. This study focuses on investigating the impact of plasticiser and drug loading on drug release pattern of rice starch films which has not been explored to date. The obtained rice films were characterised for their physicochemical properties including swelling and dissolution study. The highest drug dissolution rate was achieved in the rice films with a low drug loading due to drug amorphicity in nature. When drug loading increases, the swelling behaviour of rice films plays a dominant role in releasing drug in the crystalline form. The role of plasticiser was indicated by the plasticiser-starch interaction where a strong interaction allows drug solubilisation more readily in the dissolution medium. It is envisaged that rice films could be tailored to achieve desired drug release pattern with different plasticiser.
    Matched MeSH terms: Drug Liberation
  2. In Vitro Drug Dissolution/Permeation Testing of Nanocarriers for Skin Application: a Comprehensive Review
    Sheshala R, Anuar NK, Abu Samah NH, Wong TW
    AAPS PharmSciTech, 2019 Apr 15;20(5):164.
    PMID: 30993407 DOI: 10.1208/s12249-019-1362-7
    This review highlights in vitro drug dissolution/permeation methods available for topical and transdermal nanocarriers that have been designed to modulate the propensity of drug release, drug penetration into skin, and permeation into systemic circulation. Presently, a few of USFDA-approved in vitro dissolution/permeation methods are available for skin product testing with no specific application to nanocarriers. Researchers are largely utilizing the in-house dissolution/permeation testing methods of nanocarriers. These drug release and permeation methods are pending to be standardized. Their biorelevance with reference to in vivo plasma concentration-time profiles requires further exploration to enable translation of in vitro data for in vivo or clinical performance prediction.
    Matched MeSH terms: Drug Liberation
  3. Current potential and challenges in the advances of liquid crystalline nanoparticles as drug delivery systems
    Madheswaran T, Kandasamy M, Bose RJ, Karuppagounder V
    Drug Discov Today, 2019 07;24(7):1405-1412.
    PMID: 31102731 DOI: 10.1016/j.drudis.2019.05.004
    Lyotropic nonlamellar liquid crystalline nanoparticles (NPs) (LCN), such as cubosomes and hexosomes, are useful tools for applications in drug delivery because of their unique structural properties. LCNs are highly versatile carriers that can be applied for use with topical, oral, and intravenous treatments. In recent years, significant research has focused on improving their preparation and characterization, including controlling drug release and enhancing the efficacy of loaded bioactive molecules. Nevertheless, the clinical translation of LCN-based carriers has been slow. In this review, we highlight recent advances and challenges in the development and application of LCN, providing examples of their topical, oral, and intravenous drug delivery applications, and discussing translational obstacles to LCN as a NP technology.
    Matched MeSH terms: Drug Liberation
  4. Fulltext Levofloxacin: Insights Into Antibiotic Resistance and Product Quality
    Izadi E, Afshan G, Patel RP, Rao VM, Liew KB, Meor Mohd Affandi MMR, et al.
    Front Pharmacol, 2019;10:881.
    PMID: 31474853 DOI: 10.3389/fphar.2019.00881
    Counterfeit and substandard medicines are recognized as one of serious threats to public health. The product quality of antibacterial medicine will compromise patients' recovery and increase the chance of antibacterial resistance. The review aims to provide a summary of low quality levofloxacin issues and the risk factors as well as suggesting the aspects of product quality that need to be regulated strictly. Quality of the active ingredient, levofloxacin, has an important role to contribute to successful therapy. The poor quality of raw material, directly and indirectly, causes treatment failure as the presence of insufficient dose, mislabeled content, and poor dissolution characteristics can lead to lower bioavailability. Identifying and reporting these factors can potentially help in improving the quality of drug marketed in various developing countries and may also reduce the incidences of treatment failure. Dissolution test is used for testing the dissolution profiles and the rate of drug release from solid formulation such as oral formulations, thus providing information regarding the in vivo performance of a formulation and its bioequivalence. On the other hand, quality-testing procedures are used for comparing the quality of products.
    Matched MeSH terms: Drug Liberation
  5. Fulltext In Vitro Performance of Dutasteride-Nanostructured Lipid Carriers Coated with Lauric Acid-Chitosan Oligomer for Dermal Delivery
    Noor NM, Abdul-Aziz A, Sheikh K, Somavarapu S, Taylor KMG
    Pharmaceutics, 2020 Oct 20;12(10).
    PMID: 33092119 DOI: 10.3390/pharmaceutics12100994
    Dutasteride, licensed as an oral medicine for the treatment of benign prostatic hypoplasia, has been investigated as a treatment for androgenic alopecia. In this study, the potential for dustasteride to be delivered topically in order to reduce systemic exposure, irritation of the skin, and also cytotoxicity was explored. Chitosan oligomer (CSO) was successfully synthesised with lauric acid as a coating for a dutasteride-loaded nanostructured lipid carriers (DST-NLCs) system. DST-NLCs were prepared using a combination of melt-dispersion and ultrasonication. These negatively charged NLCs (-18.0 mV) had a mean particle size of ~184 nm, which was not significantly increased (p > 0.05) when coated with lauric acid-chitosan oligomer (CSO-LA), whilst the surface charge changed to positive (+24.8 mV). The entrapment efficiency of DST-NLCs was 97%, and coated and uncoated preparations were physically stable for up to 180 days at 4-8 °C. The drug release was slower from DST-NLCs coated with CSO-LA than from uncoated NLCs, with no detectable drug permeation through full-thickness pig ear skin from either preparation. Considering the cytotoxicity, the IC50 values for the DST-NLCs, coated and uncoated with CSO-LA were greater than for dutasteride alone (p < 0.05). DST-NLCs and empty NLCs coated with CSO-LA at 25 µM increased the cell proliferation compared to the control, and no skin irritation was observed when the DST-NLC formulations were tested using EpiDerm™. The cell and skin uptake studies of coated and uncoated NLCs incorporating the fluorescent marker Coumarin-6 showed the time-dependent uptake of Coumarin-6. Overall, the findings suggest that DST-NLCs coated with CSO-LA represent a promising formulation strategy for dutasteride delivery for the treatment of androgenic alopecia, with a reduced cytotoxicity compared to that of the drug alone and lower irritancy than an ethanolic solution of dutasteride.
    Matched MeSH terms: Drug Liberation
  6. Fulltext Engineering of Naproxen Loaded Polymer Hybrid Enteric Microspheres for Modified Release Tablets: Development, Characterization, in silico Modelling and in vivo Evaluation
    Hameed HA, Khan S, Shahid M, Ullah R, Bari A, Ali SS, et al.
    Drug Des Devel Ther, 2020;14:27-41.
    PMID: 32021089 DOI: 10.2147/DDDT.S232111
    BACKGROUND: Naproxen (NP) is a non-steroidal anti-inflammatory drug with poor aqueous solubility and low oral bioavailability, which may lead to therapeutic failure. NP causes crucial GIT irritation, bleeding, and peptic and duodenal ulcers.

    PURPOSE OF THE STUDY: This study aimed to engineer and characterize polymer hybrid enteric microspheres using an integrated (experimental and molecular modelling) approach with further development to solid dosage form with modified drug release kinetics and improved bioavailability.

    MATERIALS AND METHODS: NP loaded polymer hybrid enteric microspheres (PHE-Ms) were fabricated by using a modified solvent evaporation technique coupled with molecular modelling (MM) approach. The PHE-Ms were characterized by particle size, distribution, morphology, crystallinity, EE, drug-polymer compatibility, and DSC. The optimized NP loaded PHE-Ms were further subjected to downstream procedures including tablet dosage form development, stability studies and comparative in vitro-in vivo evaluation.

    RESULTS: The hydrophobic polymer EUD-L100 and hydrophilic polymer HPMC-E5 delayed and modified drug release at intestinal pH while imparting retardation of NP release at gastric pH to diminish the gastric side effects. The crystallinity of the NP loaded PHE-Ms was established through DSC and P (XRD). The particle size for the developed formulations of PEH-Ms (M1-M5) was in the range from 29.06 ±7.3-74.31 ± 17.7 μm with Span index values of 0.491-0.69, respectively. The produced NP hybrid microspheres demonstrated retarded drug release at pH 1.2 and improved dissolution at pH 6.8. The in vitro drug release patterns were fitted to various release kinetic models and the best-followed model was the Higuchi model with a release exponent "n" value > 0.5. Stability studies at different storage conditions confirmed stability of the NP loaded PHE-Ms based tablets (P<0.05). The molecular modelling (MM) study resulted in adequate binding energy of co-polymer complex SLS-Eudragit-HPMC-Naproxen (-3.9 kcal/mol). In contrast to the NP (unprocessed) and marketed formulations, a significant increase in the Cmax of PHE-MT1 (44.41±4.43) was observed.

    CONCLUSION: The current study concludes that developing NP loaded PHE-Ms based tablets could effectively reduce GIT consequences with restored therapeutic effects. The modified release pattern could improve the dissolution rate and enhancement of oral bioavailability. The MM study strengthens the polymer-drug relationship in microspheres.

    Matched MeSH terms: Drug Liberation
  7. Fulltext Docetaxel-Loaded Poly(3HB-co-4HB) Biodegradable Nanoparticles: Impact of Copolymer Composition
    Faisalina AF, Sonvico F, Colombo P, Amirul AA, Wahab HA, Majid MIA
    Nanomaterials (Basel), 2020 Oct 26;10(11).
    PMID: 33114572 DOI: 10.3390/nano10112123
    Polyhydroxyalkanoate (PHA) copolymers show a relatively higher in vivo degradation rate compared to other PHAs, thus, they receive a great deal of attention for a wide range of medical applications. Nanoparticles (NPs) loaded with poorly water-soluble anticancer drug docetaxel (DCX) were produced using poly(3-hydroxybutyrate-co-4-hydroxybutyrate), P(3HB-co-4HB), copolymers biosynthesised from Cupriavidus malaysiensis USMAA1020 isolated from the Malaysian environment. Three copolymers with different molar proportions of 4-hydroxybutirate (4HB) were used: 16% (PHB16), 30% (PHB30) and 70% (PHB70) 4HB-containing P(3HB-co-4HB). Blank and DCX-loaded nanoparticles were then characterized for their size and size distribution, surface charge, encapsulation efficiency and drug release. Preformulation studies showed that an optimised formulation could be achieved through the emulsification/solvent evaporation method using PHB70 with the addition of 1.0% PVA, as stabilizer and 0.03% VitE-TPGS, as surfactant. DCX-loaded PHB70 nanoparticles (DCX-PHB70) gave the desired particle size distribution in terms of average particle size around 150 nm and narrow particle size distribution (polydispersity index (PDI) below 0.100). The encapsulation efficiency result showed that at 30% w/w drug-to-polymer ratio: DCX- PHB16 NPs were able to encapsulate up to 42% of DCX; DCX-PHB30 NPs encapsulated up to 46% of DCX and DCX-PHB70 NPs encapsulated up to 50% of DCX within the nanoparticle system. Approximately 60% of DCX was released from the DCX-PHB70 NPs within 7 days for 5%, 10% and 20% of drug-to-polymer ratio while for the 30% and 40% drug-to-polymer ratios, an almost complete drug release (98%) after 7 days of incubation was observed.
    Matched MeSH terms: Drug Liberation
  8. Spray-dried alginate-coated Pickering emulsion stabilized by chitosan for improved oxidative stability and in vitro release profile
    Surjit Singh CK, Lim HP, Tey BT, Chan ES
    Carbohydr Polym, 2021 Jan 01;251:117110.
    PMID: 33142647 DOI: 10.1016/j.carbpol.2020.117110
    The commercial application of liquid-state Pickering emulsions in food systems remains a major challenge. In this study, we developed a spray-dried Pickering emulsion powder using chitosan as a Pickering emulsifier and alginate as a coating material. The functionality of the powder was evaluated in terms of its oxidative stability, pH-responsiveness, mucoadhesivity, and lipid digestibility. The Pickering emulsion powder was oxidatively more stable than the conventional emulsion powder stabilized by gum Arabic. The powder exhibited pH-responsiveness, whereby it remained intact in acidic pH, but dissolved to release the emulsion in 'Pickering form' at near-neutral pH. The Pickering emulsion powder was also mucoadhesive and could be digested by lipase in a controlled manner. These findings suggested that the multi-functional Pickering emulsion powder could be a potential delivery system for applications in the food industry.
    Matched MeSH terms: Drug Liberation
  9. Fulltext Encapsulation of Black Seed Oil in Alginate Beads as a pH-Sensitive Carrier for Intestine-Targeted Drug Delivery: In Vitro, In Vivo and Ex Vivo Study
    Azad AK, Al-Mahmood SMA, Chatterjee B, Wan Sulaiman WMA, Elsayed TM, Doolaanea AA
    Pharmaceutics, 2020 Mar 02;12(3).
    PMID: 32131539 DOI: 10.3390/pharmaceutics12030219
    Black seed oil (BSO) has been used for various therapeutic purposes around the world since ancient eras. It is one of the most prominent oils used in nutraceutical formulations and daily consumption for its significant therapeutic value is common phenomena. The main aim of this study was to develop alginate-BSO beads as a controlled release system designed to control drug release in the gastrointestinal tract (GIT). Electrospray technology facilitates formulation of small and uniform beads with higher diffusion and swelling rates resulting in process performance improvement. The effect of different formulation and process variables was evaluated on the internal and external bead morphology, size, shape, encapsulation efficiency, swelling rate, in vitro drug release, release mechanism, ex vivo mucoadhesive strength and gastrointestinal tract qualitative and quantitative distribution. All the formulated beads showed small sizes of 0.58 ± 0.01 mm (F8) and spherical shape of 0.03 ± 0.00 mm. The coefficient of weight variation (%) ranged from 1.37 (F8) to 3.93 (F5) ng. All formulations (F1-F9) were studied in vitro for release characteristics and swelling behaviour, then the release data were fitted to various equations to determine the exponent (ns), swelling kinetic constant (ks), swelling rate (%/h), correlation coefficient (r2) and release kinetic mechanism. The oil encapsulation efficiency was almost complete at 90.13% ± 0.93% in dried beads. The maximum bead swelling rate showed 982.23 (F8, r2 = 0.996) in pH 6.8 and the drug release exceeded 90% in simulated gastrointestinal fluid (pH 6.8). Moreover, the beads were well distributed throughout various parts of the intestine. This designed formulation could possibly be advantageous in terms of increased bioavailability and targeted drug delivery to the intestine region and thus may find applications in some diseases like irritable bowel syndrome.
    Matched MeSH terms: Drug Liberation
  10. Design of multi-particulate "Dome matrix" with sustained-release melatonin and delayed-release caffeine for jet lag treatment
    Razali S, Bose A, Chong PW, Benetti C, Colombo P, Wong TW
    Int J Pharm, 2020 Sep 25;587:119618.
    PMID: 32673769 DOI: 10.1016/j.ijpharm.2020.119618
    Multi-particulate Dome matrix with sustained-release melatonin and delayed-release caffeine was designed to restore jet lag sleep-wake cycle. The polymeric pellets were produced using extrusion-spheronization technique and fluid-bed coated when applicable. The compact and Dome module were produced by compressing pellets with cushioning agent. Dome matrix was assembly of modules with pre-determined compact formulation and drug release characteristics. The physicochemical and in vivo pharmacokinetics of delivery systems were examined. Melatonin loaded alginate/chitosan-less matrix exhibited full drug release within 8 h gastrointestinal transit with low viscosity hydroxypropymethylcellulose as cushioning agent. The cushioning agent reduced burst drug release and omission of alginate-chitosan enabled full drug release. Delayed-release alginate-chitosan caffeine matrix was not attainable through polymer coating due to premature coat detachment. Admixing of cushioning agent high viscosity hydroxypropylmethylcellulose and high viscosity ethylcellulose (9:1 wt ratio) with coat-free caffeine loaded particulates introduced delayed-release response via hydroxypropylmethylcellulose swelled in early dissolution phase and ethylcellulose sustained matrix hydrophobicity at prolonged phase. The caffeine was released substantially in colonic fluid in response to matrix polymers being degraded by rat colonic content. Dome matrix with dual drug release kinetics and modulated pharmacokinetics is produced to introduce melatonin-induced sleep phase then caffeine-stimulated wake phase.
    Matched MeSH terms: Drug Liberation
  11. Electro-Stimulated Release of Poorly Water-Soluble Drug from Poly(Lactic Acid)/Carboxymethyl Cellulose/ZnO Nanocomposite Film
    Gunathilake TMSU, Ching YC, Chuah CH, Hai ND, Nai-Shang L
    Pharm Res, 2020 Aug 30;37(9):178.
    PMID: 32864721 DOI: 10.1007/s11095-020-02910-z
    PURPOSE: Among various types of external stimuli-responsive DDS, electric-responsive DDS are more promising carriers as they exploit less complex, easily miniaturized electric signal generators and the possibility of fine-tuning the electric signals. This study investigates the use of intrinsically biocompatible biopolymers in electro-simulative drug delivery to enhance the release of poorly-soluble/non-ionic drug.

    METHODS: CMC/PLA/ZnO/CUR nanocomposite films were prepared by the dispersion of CMC and ZnO NPs in solubilized PLA/curcumin medium, followed by solvent casting step. Curcumin is poorly water-soluble and used as the model drug in this study. The films with different contents of CMC, PLA and ZnO NPs were characterized using FTIR, impedance spectroscopy, tensile testing and FESEM imaging. The in vitro drug release of the films was carried out in deionized water under DC electric field of 4.5 V.

    RESULTS: The ionic conductivity of the films increased with increasing the CMC concentration of the film. The addition of a small amount of ZnO NPs (2%) successfully restored the tensile properties of the film. In response to the application of the electric field, the composite films released drug with a near-linear profile. There was no noticeable amount of passive diffusion of the drug from the film with the absence of the electric field.

    CONCLUSION: The outcome of this study enabled the design of an electric-responsive nanocomposite platform for the delivery of poorly water-soluble/non-ionic drugs. Graphical abstract.

    Matched MeSH terms: Drug Liberation
  12. Fulltext Oral bioavailability enhancement of acyclovir from solid lipid nanoparticles drug delivery system
    Haniza Hassan, Ahmad Fuad Shamsuddin, Ekram Alias, Meor Mohd Redzuan Meor Mohd Affandi, Siti Khadijah Adam, Rusliza Basir
    Malaysian Journal of Medicine and Health Sciences, 2019;15(107):2-2.
    MyJurnal
    Introduction:Acyclovir, a widely marketed antiviral drug is used for the treatment of Herpes Simplex infection. High doses of acyclovir are prescribed to patients to attain its maximum therapeutic effect due to its poor absorption and low oral bioavailability. The current therapeutics regiment of acyclovir are known to cause unwarranted adverse effects, thus prompted the need for a suitable drug carrier to improve the pharmacokinetic limitations. Develop-ment of solid lipid nanoparticles for oral delivery of acyclovir proposed in this study aimed to enhance acyclovir oral bioavailability. Methods: Comprehensive experiments and a series of optimization process were carried out to ensure reproducibility and assurance of product quality. The physicochemical characteristics of the solid lipid nanoparticles developed from plant-based solid lipid, Biogapress Vegetal 297 ATO with polysorbate 80 as an emul-sifying agent were also evaluated. Results: The spherical-shaped nanoparticles had an average size of 123 nm with good drug entrapment efficiency, up to 80%. The in vitro drug release study showed that solid lipid nanoparticles had prolonged acyclovir release in simulated intestinal fluid for 24 hours. The nanoparticles formulation was con-sidered stable during storage at refrigerated temperature for at least three months. In vivo oral bioavailability study showed that acyclovir-loaded solid lipid nanoparticles possessed superior oral bioavailability when compared with the commercial acyclovir suspension. Conclusion: In conclusion, this study exhibited the feasibility of solid lipid nanoparticles as an oral delivery vehicle for acyclovir and therefore represent a new promising therapeutic concept of nanoparticulate delivery system.
    Matched MeSH terms: Drug Liberation
  13. Design of oral intestinal-specific alginate-vitexin nanoparticulate system to modulate blood glucose level of diabetic rats
    Shaedi N, Naharudin I, Choo CY, Wong TW
    Carbohydr Polym, 2021 Feb 15;254:117312.
    PMID: 33357875 DOI: 10.1016/j.carbpol.2020.117312
    Vitexin of Ficus deltoidea exhibits intestinal α-glucosidase inhibitory and blood glucose lowering effects. This study designs oral intestinal-specific alginate nanoparticulate system of vitexin. Nanospray-dried alginate, alginate/stearic acid and alginate-C18 conjugate nanoparticles were prepared. Stearic acid was adopted to hydrophobize the matrix and minimize premature vitexin release in stomach, whereas C-18 conjugate as immobilized fatty acid to sustain hydrophobic effect and drug release. Nanoparticles were compacted with polyethylene glycol (PEG 3000, 10,000 and 20,000). The physicochemical, drug release, in vivo blood glucose lowering and intestinal vitexin content of nanoparticles and compact were determined. Hydrophobization of alginate nanoparticles promoted premature vitexin release. Compaction of nanoparticles with PEG minimized vitexin release in the stomach, with stearic acid loaded nanoparticles exhibiting a higher vitexin release in the intestine. The introduction of stearic acid reduced vitexin-alginate interaction, conferred alginate-stearic acid mismatch, and dispersive stearic acid-induced particle breakdown with intestinal vitexin release. Use of PEG 10,000 in compaction brought about PEG-nanoparticles interaction that negated initial vitexin release. The PEG dissolution in intestinal phase subsequently enabled particle breakdown and vitexin release. The PEG compacted nanoparticles exhibited oral intestinal-specific vitexin release, with positive blood glucose lowering and enhanced intestinal vitexin content in vivo.
    Matched MeSH terms: Drug Liberation
  14. Fulltext Acrylated palm oil nanoparticle synthesized by radiation-induced process as a controlled drug delivery system
    Rida Tajau, Siti Farhana Fathy, Mek Zah Salleh, Nor Azowa Ibrahim, Maznah Ismail, Kamaruddin Hashim
    Jurnal Sains Nuklear Malaysia, 2013;25(2):20-29.
    MyJurnal
    The acrylated palm oil (APO) nanoparticle is a potential product that can be used as carriers in
    medical field. The main focus of the present study was to study the potential of the APO
    nanoparticles for used in a controlled drug delivery system. The microemulsion system is used as a
    medium to incorporate an active substance such as Thymoquinone (TQ) into the APO polymeric
    micelle and then the radiation technique is used as a tool for the synthesis of TQ-loaded APO
    nanoparticle. The nano-size TQ-loaded APO particles resulted the particle size of less than 150 nm
    with spherical in shape. The TQ release profile was carried out in potassium buffer saline (PBS)
    solutions (pH 7.4) at 37
    oC. And, the zero-order model has been used to determine the mechanism
    of the drug release from the corresponding nanoparticles, respectively. The TQ release was found
    to be sustained and controlled in pH 7.4. At pH 7.4, the release of TQ followed the zero-order
    model. The in-vitro drug release study showed a good prospect of the APO nanoparticle on being a
    potential drug carrier as there are toxic against colon cancer cells and not toxic towards normal
    cells. This suggested that the APO product produce using this radiation technique can be
    developed into different type of carrier systems for controlled drug release applications.
    Matched MeSH terms: Drug Liberation
  15. Fulltext Carboxymethyl cellulose from palm oil empty fruit bunch - their properties and use as a film coating agent
    Amin, M.C.I., Soom, R.M., Ahmad, I., Lian, H.H.
    Jurnal Sains Kesihatan Malaysia, 2006;4(2):53-62.
    MyJurnal
    This study was carried out to determine the physicochemical properties of carboxymethyl cellulose (CMC) derived from cellulose of palm oil empty fruit bunch (EFB) and its use asa film-coating agent. Samples were prepared at various concentrations and then their physicochemical properties were studied including the viscosity, pH, tensile strength of films, surface properties of the films and dissolution studies on coated tablets. CMC EFB showed lower viscosity than commercial CMC product at the concentration of 1%, 2% and 3% with the values of 44.0cp, 299.9cp, 358.9cp and 90.0cp, 689.9cp, 5569.0cp respectively. The tensile strength of the films for CMC EFB were 7.85MPa, 14.79MPa, 10.36MPa while the commercial CMC exhibited higher values of 21.72MPa, 35.14MPa and 26.9MPa at similar concentration. The scanning electron microscope showed different surface properties of the films for both of them where the commercial CMC is smoother in texture and very transparent unlike its counterpart. However, dissolution studies on paracetamol tablets coated using the samples showed no significant difference (p>0.05) in drug release profile between the two materials. Hence, CMC EFB has a greater potential to be developed as a competitive tablet-coating agent despite the differences in its physicochemical properties.
    Matched MeSH terms: Drug Liberation
  16. Fulltext The Interplay between Drug and Sorbitol Contents Determines the Mechanical and Swelling Properties of Potential Rice Starch Films for Buccal Drug Delivery
    Alrimawi BH, Chan MY, Ooi XY, Chan SY, Goh CF
    Polymers (Basel), 2021 Feb 15;13(4).
    PMID: 33671895 DOI: 10.3390/polym13040578
    Rice starch is a promising biomaterial for thin film development in buccal drug delivery, but the plasticisation and antiplasticisation phenomena from both plasticisers and drugs on the performance of rice starch films are not well understood. This study aims to elucidate the competing effects of sorbitol (plasticiser) and drug (antiplasticiser) on the physicochemical characteristics of rice starch films containing low paracetamol content. Rice starch films were prepared with different sorbitol (10, 20 and 30% w/w) and paracetamol contents (0, 1 and 2% w/w) using the film casting method and were characterised especially for drug release, swelling and mechanical properties. Sorbitol showed a typical plasticising effect on the control rice starch films by increasing film flexibility and by reducing swelling behaviour. The presence of drugs, however, modified both the mechanical and swelling properties by exerting an antiplasticisation effect. This antiplasticisation action was found to be significant at a low sorbitol level or a high drug content. FTIR investigations supported the antiplasticisation action of paracetamol through the disturbance of sorbitol-starch interactions. Despite this difference, an immediate drug release was generally obtained. This study highlights the interplay between plasticiser and drug in influencing the mechanical and swelling characteristics of rice starch films at varying concentrations.
    Matched MeSH terms: Drug Liberation
  17. Fulltext Dual-Functional Iron Oxide Nanoparticles Coated with Polyvinyl Alcohol/5-Fluorouracil/Zinc-Aluminium-Layered Double Hydroxide for a Simultaneous Drug and Target Delivery System
    Ebadi M, Bullo S, Buskaran K, Hussein MZ, Fakurazi S, Pastorin G
    Polymers (Basel), 2021 Mar 10;13(6).
    PMID: 33802205 DOI: 10.3390/polym13060855
    Iron oxide nanoparticles are suitable for biomedical applications owing to their ability to anchor to various active agents and drugs, unique magnetic properties, nontoxicity, and biocompatibility. In this work, the physico-chemical and magnetic properties, as well as the cytotoxicity, of Fe3O4 nanoparticles coated with a polymeric carrier and loaded with a 5-fluorouracil (5-FU) anti-cancer drug are discussed. The synthesized Fe3O4 nanoparticles were coated with polyvinyl alcohol and Zn/Al-layered double hydroxide as the drug host. The XRD, DTA/TG, and FTIR analyzes confirmed the presence of the coating layer on the surface of nanoparticles. The results showed a decrease in saturation magnetization of bare Fe3O4 nanoparticles after coating with the PVA/5FU/Zn/Al-LDH layer. In addition, the presence of the coating prevented the agglomeration of nanoparticles. Furthermore, the pseudo-second-order equation governed the kinetics of drug release. Finally, the coated nanoparticles showed stronger activity against liver cancer cells (HepG2) compared to that of the naked 5-FU drug, and displayed no cytotoxicity towards 3T3 fibroblast cell lines. The results of the present study demonstrate the potential of a nano delivery system for cancer treatment.
    Matched MeSH terms: Drug Liberation
  18. Fulltext Antibacterial efficacy and drug-release behavior study of β-tricalcium phosphate micro-granules against staphylococcus aureus and Escherichia coli
    Nor Hazliana Harun, Rabiatul Basria S.M.N. Mydin, Khairul Anuar Shariff, Nur Adila Rosdi, Davamunisvari Rames
    Malaysian Journal of Medicine and Health Sciences, 2020;16(3):202-206.
    MyJurnal
    Introduction: This study aims to investigate different residue sizes of β-tricalcium phosphate (β-TCP) micro-granules as carriers to assess antibacterial activity and drug-control release behavior of ampicillin (AMP-) and antimycotic (AMC-). Incorporation of antibiotic into the β-TCP micro-granules and it sustain release behavior could be used as alternative solution to reduce the risk of osteomyelitis and bone infections risks. Methods: Three different residue sizes (less than 300 µm, 300 µm and 600 µm) were prepared and coated with antibiotics solution (20 µg/µl of ampi- cillin and 100X antimycotic solution) by using two methods; dip and stream coating. After 72 h, 1.5 mL of distilled water was added to the treated (β-TCP) micro-granules at two different pH value (5.0 and 7.4). The extracted solution was further analyzed by Kirby Bauer disc diffusion test and spectrophotometer assay. Results: The solution con- taining AMC-(β-TCP) micro-granules with the size of 300 µm residue produced the largest inhibition zones against Escherichia coli (E. coli). All residue sizes coated with AMP- showed no antibacterial activity against both strains; Staphylococcus aureus (S. aureus) and E.coli. Additionally, the release behavior of AMC-(β-TCP) micro-granules was found not depending on the pH, but on the size of residue. Complete drug release was rapidly observed within 48
    h. Conclusion: Based on this findings, it showed AMC-(β-TCP) micro-granules had an antibacterial activity against Gram-negative strain. Specifically, it can reduced the growth rate of E. coli and the rapid release behavior of AMC- (β-TCP) micro-granules help in minimizing the risk-infections in early stage of implantation.
    Matched MeSH terms: Drug Liberation
  19. Fulltext Fabrication and Characterization of Chitosan-Tamarind Seed Polysaccharide Composite Film for Transdermal Delivery of Protein/Peptide
    Malviya R, Tyagi A, Fuloria S, Subramaniyan V, Sathasivam K, Sundram S, et al.
    Polymers (Basel), 2021 May 10;13(9).
    PMID: 34068768 DOI: 10.3390/polym13091531
    Transdermal drug delivery is used to deliver a drug by eliminating the first-pass metabolism, which increases the bioavailability of the drug. The present study aims to formulate the chitosan-tamarind seed polysaccharide composite films and evaluate for the delivery of protein/peptide molecules. Nine formulations were prepared and evaluated by using different parameters, such as physical appearance, folding endurance, thickness of film, surface pH, weight variation, drug content, surface morphology, percentage moisture intake and uptake, drug release kinetics, and drug permeability. The film weight variance was observed between 0.34 ± 0.002 to 0.47 ± 0.003 g. The drug level of the prepared films was found to be between 96 ± 1.21 and 98 ± 1.33μg. Their intake of moisture ranged between 2.83 ± 0.002 and 3.76 ± 0.001 (%). The moisture absorption of the films ranged from 5.33 ± 0.22 to 10.02 ± 0.61 (%). SEM images revealed a smooth film surface, while minor cracks were found in the film after permeation tests. During the first 4 days, drug release was between 13.75 ± 1.64% and 22.54 ± 1.34% and from day 5 to day 6, it was between 72.67 ± 2.13% and 78.33 ± 3.13%. Drug permeation during the first 4 days was 15.78 ± 1.23 %. Drug permeation (%) during the first 4 days was between 15.78 ± 1.23 and 22.49 ± 1.29 and from day 5 to day 6, it was between 71.49 ± 3.21 and 77.93 ± 3.20.
    Matched MeSH terms: Drug Liberation
  20. Fulltext Encapsulation of ginseng inside poly(lactic-co-glycolic acid)/ polyaniline microcaspsules
    Alex Zhen Kai Lo, Siti Khadijah Lukman, Syafiqah Saidin
    Malaysian Journal of Medicine and Health Sciences, 2020;16(108):1-5.
    MyJurnal
    Introduction: : Ginseng is a type of traditional medicine that has been used for thousand years to treat various dis- eases and has been proven effective in treating cardiovascular diseases. Incorporation of polyaniline (PANI) which is a type of conductive polymer together with ginseng into poly(lactic-co-glycolic acid) (PLGA) microcapsules is neces- sary for the treatment of cardiovascular diseases as the polymer will control drug release and the electroconductivity of PANI is beneficial on myocardium cells. Methods: Therefore, this project involved the encapsulation of ginseng inside PLGA/PANI microcapsules. The encapsulation of ginseng inside the microcapsules was verified through the identification of chemical composition of ginseng, PLGA and PANI using attenuated total reflectance-Fourier trans- form infrared spectroscopy (ATR-FTIR). Results: The results of scanning electron microscope (SEM) showed the formation of microspheres where the microcapsule size was decreased from 3.14±1.87 μm to 1.98±1.30 μm as the concentration of PANI increased. The distribution of microcapsules size was more homogeneous in the high con- centration of PANI as been determined through the histogram analysis. In addition, the fluorescence analysis demon- strated the efficiency of ginseng encapsulation inside PLGA/PANI microcapsules through the appearance of stained ginseng inside the microcapsules. Conclusion: As a conclusion, the ginseng was successfully encapsulated within PLGA/PANI microcapsules that will be beneficial in drug delivery application, specifically in the cardiovascular area.
    Matched MeSH terms: Drug Liberation
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links