MyMedR

Displaying publications 41 - 60 of 106 in total

Abstract:

Sort:

Latex allergy diagnosis: in vivo and in vitro standardization of a natural rubber latex extract

Turjanmaa K, Palosuo T, Alenius H, Leynadier F, Autegarden JE, André C, et al.

Allergy, 1997 Jan;52(1):41-50.
PMID: 9062628

For the diagnosis of IgE-mediated (immediate) hypersensitivity to natural rubber latex (NRL), skin prick testing with extracts of latex gloves has been widely used, but such extracts are difficult to standardize. The present study aimed to produce on an industrial scale an NRL extract from freshly collected NRL and to evaluate, calibrate, and standardize the extract by both in vivo and in vitro testing. The source material, latex of the rubber tree, Hevea brasiliensis (clone RRIM 600), was frozen immediately after collection in Malaysia and shipped in dry ice to Stallergènes SA, France. Protein and allergen profiles were analyzed by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE), immunoblotting, isoelectric focusing (IEF), crossed immunoelectrophoresis (CIE), and crossed radioimmunoelectrophoresis (CRIE). Allergen quantification was effected by RAST inhibition. The capacity of the preparation to elicit immediate hypersensitivity reactions in vivo was measured by skin prick testing in 46 latex-allergic patients and 76 nonallergic control subjects. SDS-PAGE and immunoblot profiles of the extract and an NRL standard (E8) provided by the US Food and Drug Administration were almost identical, disclosing several distinct IgE-binding proteins with apparent molecular weights of 14, 20, 27, 30, and 45 kDa, conforming to reported molecular weights of several significant NRL allergens. An arbitrary index of reactivity (IR) of 100 was assigned to the extract at 1:200 dilution (w/v), having a protein content of 22 micrograms/ml. Skin prick testing of latex-allergic patients and controls using the extract at 100 IR revealed 93% sensitivity, 100% specificity, 100% negative predictive value, and 96% positive predictive value. In conclusion, a skin prick test reagent for diagnosis of type I NRL allergy was successfully standardized. The reagent was demonstrated to contain most, if not all, of the currently known clinically significant NRL allergens, and it showed high sensitivity and specificity.

Matched MeSH terms: Latex/administration & dosage; Latex/immunology*; Latex/standards*
CaMV 35S promoter directs β-glucuronidase expression in the laticiferous system of transgenic Hevea brasiliensis (rubber tree)

Arokiaraj P, Yeet Yeang H, Fong Cheong K, Hamzah S, Jones H, Coomber S, et al.

Plant Cell Rep, 1998 May;17(8):621-625.
PMID: 30736515 DOI: 10.1007/s002990050454

Hevea brasiliensis anther calli were genetically transformed using Agrobacterium GV2260 (p35SGUSINT) that harboured the β-glucuronidase (gus) and neomycin phosphotransferase (nptII) genes. β-Glucuronidase protein (GUS) was expressed in the leaves of kanamycin-resistant plants that were regnerated, and the presence of the gene was confirmed by Southern analysis. GUS was also observed to be expressed in the latex and more importantly in the serum fraction. Transverse sections of the leaf petiole from a transformed plant revealed GUS expression to be especially enhanced in the phloem and laticifers. GUS expression was subsequently detected in every one of 194 plants representing three successive vegetative cycles propagated from the original transformant. Transgenic Hevea could thus facilitate the continual production of foreign proteins expressed in the latex.

Matched MeSH terms: Latex
Fulltext Chitosan Epoxidized Natural Rubber Biocomposites for Sorption and Biodegradability Studies

Raju G, Mas Haris MRH, Azura AR, Ahmed Mohamed Eid AM

ACS Omega, 2020 Nov 10;5(44):28760-28766.
PMID: 33195929 DOI: 10.1021/acsomega.0c04081

The slow-release mechanism of copper into soil followed by soil biodegradation was studied using the chitosan (CTS)/epoxidized natural rubber (ENR) biocomposite. The biocomposite was prepared by homogenizing CTS in ENR50 (ENR with about 50% epoxy content) latex in the presence of curing agents and acetic acid. It was found that the adsorption property of the biocomposite was very much influenced by chitosan loading, where 20phrCTS-t-ENR biocomposite can absorb 76.31% of Cu(II) ions. The desorption study indicates that the copper (II) ion can be released at a very slow and control phase as proven by the kinetic study using zero-order, first-order, Higuchi, and Korsmeyer Peppas equations. The slow-release studies comply with the Higuchi square-root equation, indicating that the release process is diffusion-controlled. Results of desorption and biodegradation process suggest that this biocomposite has the potential use of being a slow-release matrix in the field of agriculture.

Matched MeSH terms: Latex
Fulltext Vulcanisation and coagulant dipping of epoxidised natural rubber latex

Dazylah Darji, Ma'zam Md Said

Pertanika Journal of Science & Technology, 2010;18(2):-.
MyJurnal

Epoxidised Natural Rubber (ENR) is now a commercially available polymer produced by chemical modification of natural rubber. Currently, three types of ENR are commercially available, and these are ENR 10, ENR 25, and ENR 50 with 10%, 25%, and 50% mol epoxidation, respectively. Studies on prevulcanisation of ENR 50 and postvulcanisation of the latex films were carried out. The objective of this study was to develop ENR 50 that could be dipped easily in coagulant dipping solution to produce dipped products. Several attempts were made by compounding prevulcanised ENR 50 at various sulphur levels ranging from 0.5 to 3.0 pphr. Using suitable coagulant dipping systems, ENR 50 film could be formed despite the high contents of non-ionic surfactant. It was found that the tensile strength of prevulcanised ENR 50 film decreased with the increase in the sulphur level. The results show that as level of sulphur increased, M300 also increased to an optimum value of 1.5 pphr of sulphur. For the postvulcanised ENR 50 film, however, the tensile strength increased and then decreased with the increasing sulphur level. Meanwhile M300 increased with the increasing postvulcanization time and sulphur level. The postvulcanisation of ENR 50 film seems to be a more effective way of increasing tensile properties than by prevulcanisation of ENR 50.

Matched MeSH terms: Latex
Fulltext Detection of pipeline intelligent gauge jammed in pipeline by neutron device

Md Fakarudin Ab Rahman, Ismail Mustapha, Nor Pa’iza Mohd Hasan, Ibrahim, Pairu

Jurnal Sains Nuklear Malaysia, 2012;24(2):35-41.
MyJurnal

In industrial plants such as electricity generating, petroleum, chemical and petrochemical plants, pipelines are used extensively to transport liquid from one location to another. In radiation vulcanization of natural rubber latex (RVNRL) plants, pipelines are also used to transport latex to storage tank. During one of its maintenance activities, a pipeline intelligent gauge (PIG) that was used to monitor pipe integrity jammed inside the pipe causing interruption to its operation or loading activities. Sealed source technology was utilized to determine the location of jammed PIG in the pipeline. Fast neutrons from a 50 mCi Americium Beryllium (AmBe241), with energy range between 0.5 to11 MeV, were used for the study. Helium 3 (He3) detector was used to detect slow neutrons having a range of energy of 30 eV- 0.5 MeV. The investigation was carried out using neutron backscatter technique scanner. By adopting back-scattered technique, the location of jammed PIG in the pipeline has been successfully determined.

Matched MeSH terms: Latex
Tensile properties of vulcanized field natural rubber latex by electron beam

Chai CK, Md. Soot Ahmad, Wan Manshol W. Zin

Sains Malaysiana, 2008;37.

Electron beam vulcanization of natural rubber latex has been developed as an alternative to the conventional sulphur vulcanization method. This study aimed at determining the effect of electron beam dose, beam current and centrifugation to the tensile properties of field natural rubber latex. Irradiation dose and beam current ranged from 50 to 300 kGy and 1 to 15 mA respectively. The determination of tensile properties were done on cast film prepared from irradiated field latex before and after centrifugation. It was found that tensile properties increased with radiation dose but decreased with beam current. Rubber films made from centrifuged irradiated field latex were softer and showed higher tensile strength.

Matched MeSH terms: Latex
Enhancing bio-hydrogen and bio-methane production of concentrated latex wastewater (CLW) by Co-digesting with palm oil mill effluent (POME): Batch and continuous performance test and ADM-1 modeling

Raketh M, Kana R, Kongjan P, Faua'ad Syed Muhammad SA, O-Thong S, Mamimin C, et al.

J Environ Manage, 2023 Nov 15;346:119031.
PMID: 37741194 DOI: 10.1016/j.jenvman.2023.119031

This study aimed at investigating the biohydrogen and biomethane potential of co-digestion from palm oil mill effluent (POME) and concentrated latex wastewater (CLW) in a two-stage anaerobic digestion (AD) process under thermophilic (55 ± 3 °C) and at an ambient temperature (30 ± 3 °C) conditions, respectively. The batch experiments of POME:CLW mixing ratios of 100:0, 70:30, 50:50, 30:70, and 0:100 was investigated with the initial loadings at 10 g-VS/L. The highest hydrogen yield of 115.57 mLH2/g-VS was obtained from the POME: CLW mixing ratio of 100:0 with 29.0 of C/N ratio. While, the highest subsequent methane production yield of 558.01 mLCH4/g-VS was achieved from hydrogen effluent from POME:CLW mixing ratio of 70:30 0 with 21.8 of C/N ratio. This mixing ratio revealed the highest synergisms of about 9.21% and received maximum total energy of 19.70 kJ/g-VS. Additionally, continuous hydrogen and methane production were subsequently performed in a series of continuous stirred tank reactor (CSTR) and up-flow anaerobic sludge blanket reactor (UASB) to treat the co-substate. The results indicated that the highest hydrogen yield of POME:CLW mixing ratio at 70:30 of 95.45 mL-H2/g-VS was generated at 7-day HRT, while methane production was obtained from HRT 15 days with a yield of 204.52 mL-CH4/g-VS. Thus, the study indicated that biogas production yield of CLW could be enhanced by co-digesting with POME. In addition, the two-stage AD model under anaerobic digestion model no. 1 (ADM-1) framework was established, 9.10% and 2.43% of error fitting of hydrogen and methane gas between model simulation data and experimental data were found. Hence, this research work presents a novel approach for optimization and feasibility for co-digestion of POME with CLW to generate mixed gaseous biofuel potentially.

Matched MeSH terms: Latex
Fulltext Conventional rapid latex agglutination in estimation of von Willebrand factor: method revisited and potential clinical applications

Mahat M, Abdullah WZ, Hussin CM

J Immunol Res, 2014;2014:850810.
PMID: 25759835 DOI: 10.1155/2014/850810

Measurement of von Willebrand factor antigen (VWF : Ag) levels is usually performed in a specialised laboratory which limits its application in routine clinical practice. So far, no commercial rapid test kit is available for VWF : Ag estimation. This paper discusses the technical aspect of latex agglutination method which was established to suit the purpose of estimating von Willebrand factor (VWF) levels in the plasma sample. The latex agglutination test can be performed qualitatively and semiquantitatively. Reproducibility, stability, linearity, limit of detection, interference, and method comparison studies were conducted to evaluate the performance of this test. Semiquantitative latex agglutination test was strongly correlated with the reference immunoturbidimetric assay (Spearman's rho = 0.946, P < 0.001, n = 132). A substantial agreement (κ = 0.77) was found between qualitative latex agglutination test and the reference assay. Using the scoring system for the rapid latex test, no agglutination is with 0% VWF : Ag (control negative), 1+ reaction is equivalent to <20% VWF : Ag, and 4+ reaction indicates >150% VWF : Ag (when comparing with immunoturbidimetric assay). The findings from evaluation studies suggest that latex agglutination method is suitable to be used as a rapid test kit for the estimation of VWF : Ag levels in various clinical conditions associated with high levels and low levels of VWF : Ag.

Matched MeSH terms: Latex Fixation Tests/methods*
FTIR spectra of plasticized grafted natural rubber-LiCF3SO3 electrolytes

Kumutha K, Alias Y

Spectrochim Acta A Mol Biomol Spectrosc, 2006 May 15;64(2):442-7.
PMID: 16530471

Chemical modification of natural rubber (NR) has frequently been attempted to improve the performance in specific application. 30% poly(methyl metacrylate) (PMMA) grafted into NR (MG30) has been explored as a potential candidate for polymer electrolytes. The complexation effect of salt and plasticizer in polymer host electrolytes had been investigated using FTIR. The carbonyl stretch of MG30 locates at 1729 cm-1, with the addition of lithium trimethanesulfonate (LiCF3SO3) salt, new band evolves at lower frequency region at 1643-1645 cm-1. The nondegenerate vibrational mode of nus(SO3) of salted electrolytes appearing at 1031-1034 cm-1 comes from 'free' trimethanesulfonate anions and the 1040-1046 cm-1 absorption from the monodentate ion paired with triflates. These indicate MG30-salt interaction. When MG30 and ethylene carbonate (EC) formed film, the CH3 asymmetric bend of MG30 appearing at 1447cm-1 is shifted to 1449 cm-1 in the EC-polymer complex. The CO stretching at 1729 cm-1 also shifted to 1728 cm-1. Hence, the EC-MG30 system is complexed to each other. EC-LiCF3SO3 interactions are indicated by the shifting of CO bending band of EC from 718 cm-1 being shifted to 720 cm-1 in the complex. In Li+-EC interaction where the ring breathing region at 897 cm-1 in EC has shifted to 899 cm-1 in EC-salt spectrum. The band appearing at 1643-1645 cm-1 due to the coordination of Li+

Matched MeSH terms: Latex/chemistry
Fulltext The rubber tree genome shows expansion of gene family associated with rubber biosynthesis

Lau NS, Makita Y, Kawashima M, Taylor TD, Kondo S, Othman AS, et al.

Sci Rep, 2016 06 24;6:28594.
PMID: 27339202 DOI: 10.1038/srep28594

Hevea brasiliensis Muell. Arg, a member of the family Euphorbiaceae, is the sole natural resource exploited for commercial production of high-quality natural rubber. The properties of natural rubber latex are almost irreplaceable by synthetic counterparts for many industrial applications. A paucity of knowledge on the molecular mechanisms of rubber biosynthesis in high yield traits still persists. Here we report the comprehensive genome-wide analysis of the widely planted H. brasiliensis clone, RRIM 600. The genome was assembled based on ~155-fold combined coverage with Illumina and PacBio sequence data and has a total length of 1.55 Gb with 72.5% comprising repetitive DNA sequences. A total of 84,440 high-confidence protein-coding genes were predicted. Comparative genomic analysis revealed strong synteny between H. brasiliensis and other Euphorbiaceae genomes. Our data suggest that H. brasiliensis's capacity to produce high levels of latex can be attributed to the expansion of rubber biosynthesis-related genes in its genome and the high expression of these genes in latex. Using cap analysis gene expression data, we illustrate the tissue-specific transcription profiles of rubber biosynthesis-related genes, revealing alternative means of transcriptional regulation. Our study adds to the understanding of H. brasiliensis biology and provides valuable genomic resources for future agronomic-related improvement of the rubber tree.

Matched MeSH terms: Latex/biosynthesis*
Enhanced dispersion of multiwall carbon nanotubes in natural rubber latex nanocomposites by surfactants bearing phenyl groups

Mohamed A, Anas AK, Bakar SA, Ardyani T, Zin WM, Ibrahim S, et al.

J Colloid Interface Sci, 2015 Oct 1;455:179-87.
PMID: 26070188 DOI: 10.1016/j.jcis.2015.05.054

Here is presented a systematic study of the dispersibility of multiwall carbon nanotubes (MWCNTs) in natural rubber latex (NR-latex) assisted by a series of single-, double-, and triple-sulfosuccinate anionic surfactants containing phenyl ring moieties. Optical polarising microscopy, field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), and Raman spectroscopy have been performed to obtain the dispersion-level profiles of the MWCNTs in the nanocomposites. Interestingly, a triple-chain, phenyl-containing surfactant, namely sodium 1,5-dioxo-1,5-bis(3-phenylpropoxy)-3-((3-phenylpropoxy)carbonyl) pentane-2-sulfonate (TCPh), has a greater capacity the stabilisation of MWCNTs than a commercially available single-chain sodium dodecylbenzenesulfonate (SDBS) surfactant. TCPh provides significant enhancements in the electrical conductivity of nanocomposites, up to ∼10(-2) S cm(-1), as measured by a four-point probe instrument. These results have allowed compilation of a road map for the design of surfactant architectures capable of providing the homogeneous dispersion of MWCNTs required for the next generation of polymer-carbon-nanotube materials, specifically those used in aerospace technology.

Matched MeSH terms: Latex/chemistry*
Fulltext Prevalence of latex hypersensitivity among health care workers in Malaysia

Shahnaz M, Azizah MR, Hasma H, Mok KL, Yip E, Ganesapillai T, et al.

Med J Malaysia, 1999 Mar;54(1):26-31.
PMID: 10972001

Health care workers have been reported to constitute one of the few high-risk groups related to IgE-mediated hypersensitivity associated with the use of latex products. This paper describes the first ever study of prevalence carried out in Malaysia among these workers. One hundred and thirty health care personnel from Hospital Kuala Lumpur were skin tested. Extracts used were prepared from seven different brands of natural rubber latex gloves with varying levels of extractable protein (EPRRIM). Out of the 130 volunteers, 4 (3.1%) had positive skin test to latex with extracts with high levels of EPRRIM (> 0.7 mg/g). The prevalence among the Malaysian health care workers can be considered to be low in comparison to that of some consumer countries as the USA which reported a prevalence of as high as 16.9%.

Matched MeSH terms: Latex/immunology*
Feasibility study on the utilization of rubber latex effluent for producing bacterial biopolymers

Tang SN, Fakhru'l-Razi A, Hassan MA, Karim MI

Artif Cells Blood Substit Immobil Biotechnol, 1999 Sep-Nov;27(5-6):411-6.
PMID: 10595441

Rubber latex effluent is a polluting source that has a high biochemical oxygen demand (BOD). It is estimated that about 100 million liters of effluent are discharged daily from rubber processing factories. Utilization of this effluent such as the use of a coupled system not only can reduce the cost of treatment but also yield a fermentation feedstock for the production of bioplastic. This study initially was carried out to increase the production of organic acids by anaerobic treatment of rubber latex effluent. It was found that through anaerobic treatment the concentration of organic acids did not increase. Consequently, separation of organic acids from rubber latex effluent by anion exchange resin was examined as a preliminary study of recovering acetic and propionic acids. However, the suspended solids (SS) content in the raw effluent was rather high which partially blocked the ion-exchange columns. Lime was used to remove the SS in the rubber latex effluent. After the lime precipitation process, organic acids were found to adsorb strongly onto the anion exchange resin. Less adsorption of organic acids onto the resin was observed before the lime precipitation. This was probably due to more sites being occupied by colloidal particles on the resin thus inhibiting the adsorption of organic acids. The initial concentration of organic acids in the raw effluent was 3.9 g/L. After ion exchange, the concentration of the organic acids increased to 27 g/L, which could be utilized for production of polyhydroxyalkanoates (PHA). For PHA accumulation stage, concentrated rubber latex effluent obtained from ion exchange resins and synthetic acetic acid were used as the carbon source. Quantitative analyses from fed batch culture via HPLC showed that the accumulation of PHA in Alcaligenes eutrophus was maximum with a concentration of 1.182 g/L when cultivated on synthetic acetic acid, corresponding to a yield of 87% based on its cell dry weight. The dry cell weight increased from 0.71 to 1.67 g/L. On the other hand, using concentrated rubber latex effluent containing acetic and propionic acids resulted in reduced PHA content by dry weight (14%) but the dry cell weight increased from 0.49 to 1.30 g/L. The results clearly indicated that the cells grow well in rubber latex effluent but no PHA was accumulated. This could be due to the high concentration of propionic acid in culture broth or other factors such as heavy metals. Thus further work is required before rubber latex effluent can be utilized as a substrate for PHA production industrially.

Matched MeSH terms: Latex/metabolism*
Amino acid sequence similarity of Hev b 3 to two previously reported 27- and 23-kDa latex proteins allergenic to spina bifida patients

Yeang HY, Ward MA, Zamri AS, Dennis MS, Light DR

Allergy, 1998 May;53(5):513-9.
PMID: 9636811

Separate studies have reported spina bifida patients to be especially allergic to proteins of 27 and 23 kDa found in the serum of centrifuged natural rubber latex. An insoluble latex protein located on the surface of small rubber particles, Hev b 3, has similarly been found to be allergenic to spina bifida patients. In this study, internal amino acid sequences of Hev b 3 showed similarity to the published sequences for the 27- and 23-kDa latex proteins. The latter allergens are hence identified as Hev b 3. Determination of the molecular weight of Hev b 3 revealed various species of 22-23 kDa. The consistent gaps of about 266 Da observed between various forms of the intact protein suggest that the protein undergoes post-translational modification. To determine whether Hev b 3 also occurs in a soluble form in the latex serum, its presence in molecular-filtered serum was checked by ELISA and Western blot. The results showed Hev b 3 to be largely absent in the C-serum from fresh latex. The protein is therefore insoluble in its native state. However, a small amount of the solubilized protein was detected in ammonia-stabilized latex (commonly used in the manufacture of latex products).

Matched MeSH terms: Latex/immunology*
Immunoglobulin E reactivity to latex antigens in the sera of patients from Finland and the United States

Kurup VP, Kelly KJ, Turjanmaa K, Alenius H, Reunala T, Palosuo T, et al.

J Allergy Clin Immunol, 1993 Jun;91(6):1128-34.
PMID: 8509575

BACKGROUND: Patients with latex sensitivity and latex antigens from the United States and Finland, two countries where allergic reactions to latex have been widely reported, were evaluated to determine the spectrum of immune responses.
METHODS: Sera from 27 patients from Finland and 18 from the United States with latex allergy and control sera from nonsensitive individuals were studied for latex-specific IgE antibodies. Four antigen preparations were used: two extracted from gloves and one each extracted from rubber tree sap from Malaysia and India. All 45 patients had skin prick test results that were positive to latex antigens, and all sera were evaluated by enzyme-linked immunosorbent assay (ELISA) with the various antigens.
RESULTS: There were considerable differences in the reactivity of patient sera with the different antigens. Only 50% of the sera from patients with latex allergy from Finland demonstrated significant levels of IgE to latex as determined by enzyme-linked immunosorbent assay. These patients showed more reactivity with rubber tree sap antigens than with glove antigens. However, 72% of the patients from the United States demonstrated antibodies to latex, and no marked differences were noted between the antigen extracts.
CONCLUSIONS: The results indicate that reagents such as rubber tree sap, which contain multiple clinically significant antigenic components, should be included in evaluation of latex allergy and that differences in patient populations may result in serologic variances.

Matched MeSH terms: Latex/adverse effects*
Precipitation of Hevea brasiliensis latex proteins with trichloroacetic acid and phosphotungstic acid in preparation for the Lowry protein assay

Yeang HY, Yusof F, Abdullah L

Anal Biochem, 1995 Mar 20;226(1):35-43.
PMID: 7785777

Many proteins derived from the latex of Hevea brasiliensis that remain soluble in trichloroacetic acid (TCA) can be precipitated by phosphotungstic acid (PTA). A combination of 5% TCA and 0.2% PTA precipitates a wide range of proteins effectively even when they are present in low concentrations (below 1 microgram ml-1). In addition to its protein purification function, acid precipitation also increases the sensitivity of the subsequent protein assay by allowing the test sample to be concentrated. Another advantage of protein precipitation by TCA and PTA is that very small amounts of protein (of the order of 10 micrograms) can be repeatably recovered without the use of precipitate-bulking agents such as sodium deoxycholate. This general procedure of protein purification and concentration is simple and rapid, but the use of PTA may not be fully compatible with the Bradford protein assay. A modified Lowry microassay is described which enables about 3 micrograms ml-1 to be quantitated at the photometric absorbance of 0.05. When used in conjunction with protein concentration by precipitating with TCA/PTA, approximately 0.4 microgram ml-1 protein present in 6 ml of solution can be assayed.

Matched MeSH terms: Latex/chemistry*
Fulltext Identification and characterization of jasmonic acid- and linolenic acid-mediated transcriptional regulation of secondary laticifer differentiation in Hevea brasiliensis

Loh SC, Othman AS, Veera Singham G

Sci Rep, 2019 10 04;9(1):14296.
PMID: 31586098 DOI: 10.1038/s41598-019-50800-1

Hevea brasiliensis remains the primary crop commercially exploited to obtain latex, which is produced from the articulated secondary laticifer. Here, we described the transcriptional events related to jasmonic acid (JA)- and linolenic acid (LA)-induced secondary laticifer differentiation (SLD) in H. brasiliensis clone RRIM 600 based on RNA-seq approach. Histochemical approach proved that JA- and LA-treated samples resulted in SLD in H. brasiliensis when compared to ethephon and untreated control. RNA-seq data resulted in 86,614 unigenes, of which 2,664 genes were differentially expressed in JA and LA-induced secondary laticifer harvested from H. brasiliensis bark samples. Among these, 450 genes were unique to JA and LA as they were not differentially expressed in ethephon-treated samples compared with the untreated samples. Most transcription factors from the JA- and LA-specific dataset were classified under MYB, APETALA2/ethylene response factor (AP2/ERF), and basic-helix-loop-helix (bHLH) gene families that were involved in tissue developmental pathways, and we proposed that Bel5-GA2 oxidase 1-KNOTTED-like homeobox complex are likely involved in JA- and LA-induced SLD in H. brasiliensis. We also discovered alternative spliced transcripts, putative novel transcripts, and cis-natural antisense transcript pairs related to SLD event. This study has advanced understanding on the transcriptional regulatory network of SLD in H. brasiliensis.

Matched MeSH terms: Latex/metabolism*
Characterization of a monoclonal antibody against latex protein associated with latex allergy

Kurup VP, Kumar A, Kelly KJ, Fink JN

J Allergy Clin Immunol, 1993 Nov;92(5):638-43.
PMID: 8227854 DOI: 10.1016/0091-6749(93)90005-z

Several hybridomas were produced against antigens extracted from the latex sap of Hevea brasiliensis. One of the monoclonal antibodies (LA-E3) reacted with antigens demonstrating binding to patient sera on crossed enzyme immunoelectrophoresis. This monoclonal antibody reacted with 2 of 10 glove extracts studied and with both Malaysian and Indian latex plant extracts. The antigens purified with monoclonal antibody affinity chromatography demonstrated specific IgE in the sera of patients with latex allergy as determined by ELISA. This monoclonal antibody can thus be utilized to obtain reliable antigens useful in the diagnosis of latex sensitivity, although additional antigens will likely be necessary to enhance sensitivity and specificity.

Matched MeSH terms: Latex/adverse effects*
Fulltext Large-scale collection of full-length cDNA and transcriptome analysis in Hevea brasiliensis

Makita Y, Ng KK, Veera Singham G, Kawashima M, Hirakawa H, Sato S, et al.

DNA Res, 2017 Apr 01;24(2):159-167.
PMID: 28431015 DOI: 10.1093/dnares/dsw056

Natural rubber has unique physical properties that cannot be replaced by products from other latex-producing plants or petrochemically produced synthetic rubbers. Rubber from Hevea brasiliensis is the main commercial source for this natural rubber that has a cis-polyisoprene configuration. For sustainable production of enough rubber to meet demand elucidation of the molecular mechanisms involved in the production of latex is vital. To this end, we firstly constructed rubber full-length cDNA libraries of RRIM 600 cultivar and sequenced around 20,000 clones by the Sanger method and over 15,000 contigs by Illumina sequencer. With these data, we updated around 5,500 gene structures and newly annotated around 9,500 transcription start sites. Second, to elucidate the rubber biosynthetic pathways and their transcriptional regulation, we carried out tissue- and cultivar-specific RNA-Seq analysis. By using our recently published genome sequence, we confirmed the expression patterns of the rubber biosynthetic genes. Our data suggest that the cytoplasmic mevalonate (MVA) pathway is the main route for isoprenoid biosynthesis in latex production. In addition to the well-studied polymerization factors, we suggest that rubber elongation factor 8 (REF8) is a candidate factor in cis-polyisoprene biosynthesis. We have also identified 39 transcription factors that may be key regulators in latex production. Expression profile analysis using two additional cultivars, RRIM 901 and PB 350, via an RNA-Seq approach revealed possible expression differences between a high latex-yielding cultivar and a disease-resistant cultivar.

Matched MeSH terms: Latex/biosynthesis*
Fulltext Investigation of stx 2 + eae + Escherichia coli O157:H7 in beef imported from Malaysia to Thailand

International Food Research Journal, 2011;18(1):381-386.
MyJurnal

To gain insight into the microbiological safety of food products routinely traded across international borders in Southeast Asian countries, beef imported from Malaysia to southern Thailand was examined for contamination with Escherichia coli O157 and its subsequent spread into the imported areas. We screened 31 samples exported from Malaysia and 36 domestic Thai samples. Isolation methods including an O157 antigen-targeted immunomagnetic separation technique, screening on CHROMagar O157 medium, and serotype confirmation of E. coli isolates by specific agglutination tests were employed. Fourteen strains of E. coli O157:H7 were isolated from eight Malaysian samples (25.8%) and six strains from four Thai samples (11.1%). These strains were of the stx1-stx2+eae+ genotype except one Malaysian strain which was of the stx1- stx2- eae+ genotype. All 19 O157:H7 strains possessing the stx2 gene produced little or no Stx2 (reversed passive latex agglutination titer ≤ 4). Of the 19 strains, five Malaysian (38.5%) and two Thai (33.3%) strains exhibited resistance to a set of antibiotics. Finally, the results of two DNA fingerprinting
analyses (O157 IS-printing targeted to IS629 and pulsed-field gel electrophoresis, PFGE) of the O157:H7 strains possessing the stx2 gene, indicated that the Malaysian and Thai strains are closely related. Therefore, E. coli O157:H7 might be transferred from Malaysia to southern Thailand through beef trade.

Matched MeSH terms: Latex; Latex Fixation Tests

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links