This study aimed to detect the presence of enterococci in the root canals of untreated and treated teeth with periapical disease and to compare this to their presence in the saliva and in the immediate surgical environment during root canal treatment. Using an aseptic technique, 33 samples were obtained from 27 untreated and 6 previously treated teeth associated with apical periodontitis. Reduced Transport Fluid (RTF) was used as transport medium. Saliva samples and areas in the surgical environment were also sampled. These were performed prior to chemo-mechanical debrjdement and obturation for every case. The saliva was diluted to 10- J and was plated on Bile Aesculin Azide (BEA) agar whereas the rest of the samples were plated on Bile Aesculin (BE) agar. These plates were then incubated aerobically at 37°C for 48 hours. All the colony types that blackened the agar were sub-cultured to obtain pure isolates and tested on 6.5% sodium chloride (NaCI). Growth on this medium was Gram stained for further confirmation of cell morphology. Gram positive cocci isolated from previous positive test were identified as enterococci. Enterococci were recovered from untreated cases only; from 2 teeth (in 2 patients) prior to chemo-mechanical debridement, from 3 teeth (in 3 patients) prior to obturation and I from saliva sample. A 'total of 5 samples from 5 different patients were positive for enteroco•cci. Sampling in the immediate surgical environment revealed a low occurence in the range of3.0% (1/33) to 15_2% (5/33). In conclusion, the occurence of enterococci in patients and the immediate surgical environment was low number.
The nuts consumption pattern of Malaysian adults were assessed by a set of food frequency questionnaire collected from June to December 2008 from 364 adults (129 men and 235 women) which were selected by stratified random sampling from five areas of Penang state. Average total nuts consumption of 0.77 g/day among Penang adults was found to be no gender-specific difference but was significantly different (P
Transition metals play an important role in the growth of carbon nanotubes (CNTs). Series of unsupported hybrid catalysts consisting of Ni:Cu, Ni:Cr, and Ni:Mn doped with Nd catalyst, respectively were synthesized by impregnation method. The catalytic performance of the catalyst for the production of CNTs was measured in the pyrolysis process of hydrocarbon source by catalytic chemical vapour deposition method. Acetylene gas was used as the source of carbon in the pyrolysis process. The decomposition of acetylene was carried out at 700ºC. The bulk properties of the catalysts were investigated by X-ray diffraction. Field emission scanning electron microscopy and thermal analysis were used to observe the morphology and thermal stability of the as-synthesized CNTs, respectively. Hybrid catalyst of Ni:Mn/Nd and Ni:Cr/Nd in 3:1 atomic ratio gave high percentage of carbon yield which was assigned for the high production of CNTs with the mass of yield 18 times greater than the initial mass of the catalyst used.
This paper presents investigations into the development of control schemes for end-point vibration
suppression and input tracking of a flexible manipulator. A constrained planar single-link flexible manipulator is considered and the dynamic model of the system is derived using the assumed mode method. To study the effectiveness of the controllers, a Linear Quadratic Regulator (LQR) was initially developed for control of rigid body motion. This is then extended to incorporate a noncollocated PID controller and a feedforward controller based on input shaping techniques to control vibration (flexible motion) of the system. For feedforward controller, positive and modified specified negative amplitude (SNA) input shapers are proposed and designed based on the properties of the system. Results from the simulation of the manipulator responses with the controllers are presented in time and frequency domains. The performances of the control schemes are assessed in terms of level of vibration reduction, input tracking capability and time response specifications. Finally, a comparative assessment of the control techniques is presented and discussed.
The microstructural evolution of Sn-40Pb/Cu joints has been investigated under 125 o C thermal exposure conditions using single shear lap joints. A scanning electron microscope (SEM) was used to observe the morphology of the phases and energy dispersive x-ray (EDX) was used to estimate the elemental compositions of the phases. A double layer of Cu6Sn5 and Cu3Sn were observed. The Cu6Sn5 developed with a scalloped morphology, while the Cu3Sn always grew as a somewhat undulated planar layer in phase with the Cu6Sn5. The Cu6Sn5 layer began to transform from scallop shape to planar type after aging for 375 hours due to reduction in the interfacial energy. The intermetallic layers showed a linear dependence on the square root of aging time. The growth rate constant of the intermetallic compounds are estimated as 15.2 x 10 - 14 and 0.152 x 10 -14 cm 2 /s for Cu6Sn5 and Cu3Sn intermetallic, respectively.
Tropical greenhouses require active evaporative cooling system such as pad-and-fan to ensure a suitable microclimate for crop production. Excess heat causes indoor temperature to become hotter than desired resulting in detrimental effects to crop growth and production. Solar radiation intensity and outside temperature affect temperature and relative humidity level inside a greenhouse, while wide gradients in temperature and relative humidity can cause problems related to crop growth and production uniformity. A 300 m2 greenhouse, equipped with evaporative pad and four exhaust fans at each end walls, was used in the study. Horizontal and vertical profiles of the temperature and relative humidity inside the greenhouse were investigated. Results showed that temperature increased from evaporative pad area to exhaust fans area in a horizontal plane, while relative humidity showed an inverse pattern from temperature. In the vertical plane, temperature increased, while relative humidity decreased from lower level to the upper level. ANOVA results showed that in overall, temperature and relative humidity inside the greenhouse were uniform as there was no significant difference at 95% confidence interval. Thus, it was concluded that greenhouse cooling system by evaporative pad and exhaust fans are suitable for application in a tropical country such as Malaysia.
Chili shrimp paste (CSP) is a favorite condiment in Southeast Asia. Microbial spoilage makes CSP unsuitable for consumption within several days. Thermal treatment was applied to produce microbiologically safe CSP. The effect of heating process on physicochemical and sensorial properties of CSP was studied. Heating at the optimum condition (21.6 min, 80 ˚C) has been shown effective and reliable in controlling microorganisms in CSP. Complete inactivation of peroxidase activities could not be accomplished at the optimal point, and significant reduction of the total phenolic and capsaicinoids contents was observed. Sensorial evaluation indicated that thermally processed CSP was less preferred by panelists when compared to freshly prepared samples of dry weight respectively.
Academic and corporate interest in sustainable product and process development has risen considerably
in recent years. This can be seen by the number of papers published and in particular by special issued of journals. This paper reports the results of a review of published peer-reviewed literature from 1987 to 2012 to provide an up-to-date picture of sustainability and sustainable assessment. A structured methodology is followed to narrow down the search from around 3500 papers to 111. A variety of different sustainability assessment methodologies are reviewed in two classified research areas: product sustainability assessment and process sustainability assessment. In presenting a detailed taxonomy of product and process sustainability assessment methods, the paper also outlines the advantages and weaknesses of the sustainability assessment methods. The review sheds light on the weak points of current research in this area. The paper also highlights several key issues which have to be taken into account in attempting to develop a product or process sustainability assessment research paradigm for future applications in manufacturing systems.
This paper outlines the past five decades of scientific interests and advances in medicinal plant research in Malaysia. Initially the prime interest of research programmes has been on phytochemical studies leading to the discovery of biologically active compounds as chemical templates to produce new drug candidates. As the Malaysian herbal medicine market experiences an extraordinary growth, the research approaches taken have recently included activities to develop herbal medicines into quality, efficacious and safe products for human consumption. Advances in chromatographic and spectroscopic techniques have had a tremendous impact on the isolation and structure elucidation of the constituents of medicinal plants. The development of a series of bioassay methodologies and utilization of bioassay-guided isolation techniques have contributed significantly to the progress of medicinal plant research in Malaysia. Research work on some medicinal plants carried out by the local scientists will be illustrated as examples.
The presence of 226 Ra in water is a great concern in human life since it can cause health risk to a certain extent. In the state of Kelantan, being known of its granitic area, there is a lack measurement of 226 Ra content in river water, since water is the major source of water supply. According to the INTERIM National Water Quality Standards for Malaysia (INWQS), 226 Ra activity concentration in water cannot exceed 0.1 Bq/L. For this reasons, this research was planned to carry out a systematic measurement of water along Sungai Kelantan. Liquid Scintillation Counting was used for measurement of 226 Ra in water samples from Sungai Kelantan mainly in district of Kuala Krai. In this paper, the results obtained is about 26 water samples, filtered and unfiltered, collected along Sungai Lebir, Sungai Sok and Bukit Sabah. Thus, the assessment activity concentration of 226 Ra in river water was obtained as well as annual effective dose for consumption of drinking water.
Mating studies were conducted on 78 isolates of Fusarium species section Liseola from rice, sugarcane and maize. From the crosses with tester strains of Gibberella fujikuroi species complex, 64.1% (50 out of 78 isolates) were cross-fertile with tester strains of mating populations A to E. The results of the mating studies showed that of the 50 isolates, 19 belonged to mating population A (Gibberella moniliformis), 18 to mating population B (Gibberella sacchari), 4 to mating population E (Gibberella subglutinans), 6 to mating population D (Gibberella intermedia) and 3 to mating population C (G. fujikuroi). Identification of several mating populations from rice,sugarcane and maize could be important biological entities under field conditions.
The state of Selangor, Malaysia, is facing a significant rise in the number of malaria cases with the incidence varying from 20 to 90 per 100,000 persons in a population. A study was carried out to describe the distribution of malaria cases in relation to the growing number of foreign workers in Selangor. Data were reviewed using the return forms "PBV (M) 101", a summary of malaria cases in Selangor for 2006 and Annual Reports of Vector-Borne Disease Control Unit, Selangor State Department for 2001- 2005. The malaria cases in Selangor varied between 172 cases in 2001 and 90 cases in 2006. Most of the cases were contributed by foreign workers, who were predominantly male of economically active age group and came from malaria endemic countries. Most of these cases were concentrated in the urban districts. Malaria is still endemic in Selangor. Malarial infection has the potential of contributing to an urban outbreak of malaria.
A series of polycrystalline samples (La1-xSmx)0.67Sr0.33MnO3 (X=0.00, 0.05 and 0.10) were prepared using the conventional solid-state reaction method. The XRD analysis indicated that all the samples were fully crystalline and in a single phase with a rhombohedral structure after a sintering at 1200ºC for 24 hours in air. Meanwhile, the Atomic Force Microscopy measurements showed that a small amount of Sm doping in La sites affected the grain growth and this might affect the grain boundary layer, thus resulting in the reduction of the Curie temperature, TC. Extrinsic magnetoresistance (MR) was observed for all the samples with a large negative MR at low field (0-0.1 or 0.2T) region, followed by a slower varying MR at high field (0.1 or 0.2-1T). The highest low-field MR value of -4.6% (at 0.1T) and -6.1% (at 0.2T) were observed for sample X=0.10 and X=0.05, respectively. Hence, these indicated that the extrinsic MR was grain size dependent and was therefore enhanced with a small amount of Sm substitution in La sites.
Clubfoot is associated with leg length inequality, with the affected leg being shorter as a consequence of the hypoplasia. Early treatment of a minimally hypoplastic clubfoot usually allows catchup growth and both legs equalise in length after a few years. Late treatment however is associated with a shortening of the affected foot. A case is described where late treatment of a severe clubfoot is assocated with lengthening of the affected leg.
Ceramic of BaxSr1-xTiO3 (BST) for x =0.3; 0.5 and 0.7 were successfully deposited by solid solution method. The BST ceramic were analyzed by x-ray diffraction (XRD). The XRD spectra was recorded on a Philips type PW 3701 diffractometer using CuKD (Oco = 1.54056 Å) radiation at 30 KV and 30 mA (900 watt). The spectra shows that BST ceramic are polycrystalline with tetragonal structure. The lattice constants analysis of the grown ceramics was analyzed by visual basic program. Using Cohen’s and Cramer’s algorithms in visual basic program, , the lattice constants are a = b = 3.877 Å; c = 3.970 Å for Ba0.3Sr0.7TiO3 ceramic, a = b = 3.979 Å; c = 3.981 Å. for Ba0.5Sr0.5TiO3 ceramic and a = b = 3.965 Å; c = 4.005 Å for Ba0.7Sr0.3TiO3 ceramic, respectively. The reform value of the lattice constant of BST ceramic is possibly associated with the anti site defects of Ba and Sr.
A recently published meta-analysis showed that each additional serving of rice increased risk of type 2 diabetes mellitus (DM) by an alarming 11%. We investigated whether this phenomenon is seen in the Malaysian population by studying the effect of rice intake and added sugar consumption on fasting plasma glucose (FPG) and fasting triacylglycerol (TAG).
Chlorella is one of the common microalgae found in a wide range of habitats, including Antarctica. Chlorella UMACC 234 is an interesting isolate in the collection of Antarctic microalgae in the University of Malaya algae culture collection (UMACC) as it grows well at temperatures much higher than the ambience. The alga was isolated from snow samples collected from Casey, Antarctica. This study investigates the influence of nitrogen source on the growth, biochemical composition and fatty acid profile of Chlorella UMACC 234. The cultures were grown in Bold’s Basal Medium with 3.0 mM NaNO3, NH4Cl or urea. The cultures grown on NaNO3 attained the highest specific growth rate (μ = 0.43 day–1) while the specific growth rates of those grown on NH4Cl and urea were not significantly different (p > 0.05). The urea-grown cells produced the highest amounts of lipids (25.7% dry weight) and proteins (52.5% dry weight) compared to those grown on other nitrogen sources. The cell numbers attained by the cultures grown at NaNO3 levels between 0.3 and 3.0 mM were similar but decreased markedly at 9.0 mM NaNO3. The fatty acids of Chlorella UMACC 234 were dominated by saturated fatty acids, especially 16:0 and 18:0. The percentage of polyunsaturated fatty acids was very low, especially in cells grown on urea (0.9% total fatty acids). Characterisation of the growth and biochemical composition of this Antarctic Chlorella is important to our studies on the relationship of Chorella isolates from tropical, temperate and polar regions, especially in terms of phylogeny and stress adaptation.
The in vitro cytotoxic potential of locally produced dental porcelain was evaluated in this study. The cellular response of human osteoblast and fibroblast cell lines were assessed using MTT assay by incubating with the fluid extract of dental porcelain powder and dental porcelain discs (direct test). Aging process was carried out by submerging the discs into 3% bovine serum albumin (BSA) solution. Tests on extracts showed that dental porcelain was significantly different from the control at a concentration of 250 mg/ml. Direct test showed that dental porcelain after aging was not significantly different from the control with a mean (SD) of 89.2 (13.4)%, whereas, it was significantly different from the control before conditioning of BSA with a mean (SD) of 88.5 (12.1)%. However, the dental porcelain caused mild suppression of succinate dehydrogenase activity (
Vibrio parahaemolyticus is a gram negative bacterium and causes gastrointestinal illness in humans. In this study, twenty five out of fifty cockle samples from Padang, Indonesia produced purple colonies when they were grown on selective medium, CHROMagarTM Vibrio. Specific–PCR for toxR gene detection gave positive results in which a band with 368 base pairs size appeared on the gel for all the isolates that confirmed the presence of V. parahaemolyticus. In the virulence properties test, all the isolates showed negative results for tdh and trh genes detection. The results indicate that the isolates under this study do not contain virulence properties that correlate to the ability of infection and diseases, which means that they are nonpathogenic.
Many studies have shown that probiotic strains added to a number of probiotic products are not compatible to that of
claimed. It is thus of note to validate probiotic strains added to probiotic products. In this study, three probiotic drinks,
A, B and C, were cultured on MRS agar and the number of bacterial colonies was enumerated. The bacterial counts
recovered from A (9.3 ± 6.9 log CFU/ml) and C (9.0 ± 6.9 log CFU/ml) were signifi cantly higher than B (5.2 ± 3.5 log
CFU/ml) and achieved the minimal amount recommended for probiotic bacteria. All of the isolates appeared as gram
positive rods microscopically and were proven to be catalase negative. However, there were only A1, A2, B4 and C1 that
were highly tolerant to the gastrointestinal pH 3 to 6. The four isolates produced and secreted antimicrobial substances
which inhibited the growth of Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). C1 showed the greatest
growth inhibition by forming 17.50-mm and 17.85-mm inhibition zones against E. coli and S. aureus, respectively. The
16s rDNA sequencing and phylogenetic analysis were performed to further identify the twelve isolates. The twelve isolates
were found to be Lactobacillus (L.), particularly L. casei and L. paracasei. However, the bacteria isolated from drink B
were incompatible to the labelled ones. In conclusion, probiotic drinks are possible to contain different bacterial counts
and probiotic strains from the labelled ones. These differences might affect health benefi ts rendered by probiotic strains
to consumers.