The implementation of extracorporeal carbon dioxide removal (ECCO2R) as one of the extracorporeal life support system is getting more attention today. Thus, the objectives of this paper are to study the clinical practice of commercial ECCO2R system, current trend of its development and also the perspective on future improvement that can be done to the existing ECCO2R system. The strength of this article lies in its review scope, which focuses on the commercial ECCO2R therapy in the market based on membrane lung and current investigation to improve the efficiency of the ECCO2R system, in terms of surface modification by carbonic anhydrase (CA) immobilization technique and respiratory electrodialysis (R-ED). Our methodology approach involves the identification of relevant published literature from PubMed and Web of Sciences search engine using the terms Extracorporeal Carbon Dioxide Removal (ECCO2R), Extracorporeal life support, by combining terms between ECCO2R and CA and also ECCO2R with R-ED. This identification only limits articles in English language. Overall, several commercial ECCO2R systems are known and proven safe to be used in patients in terms of efficiency, safety and risk of complication. In addition, CA-modified hollow fiber for membrane lung and R-ED are proven to have good potential to be applied in conventional ECCO2R design. The detailed technique and current progress on CA immobilization and R-ED development were also reviewed in this article.
In computed tomography (CT), blurring occurs due to different hardware or software errors and hides certain medical details that are present in an image. Image blur is difficult to avoid in many circumstances and can frequently ruin an image. For this, many methods have been developed to reduce the blurring artifact from CT images. The problems with these methods are the high implementation time, noise amplification and boundary artifacts. Hence, this article presents an amended version of the iterative Landweber algorithm to attain artifact-free boundaries and less noise amplification in a faster application time. In this study, both synthetic and real blurred CT images are used to validate the proposed method properly. Similarly, the quality of the processed synthetic images is measured using the feature similarity index, structural similarity and visual information fidelity in pixel domain metrics. Finally, the results obtained from intensive experiments and performance evaluations show the efficiency of the proposed algorithm, which has potential as a new approach in medical image processing.
In the backdrop of prompt advancement, information and communication technology (ICT) has become an inevitable part to plan and design of modern solid waste management (SWM) systems. This study presents a critical review of the existing ICTs and their usage in SWM systems to unfold the issues and challenges towards using integrated technologies based system. To plan, monitor, collect and manage solid waste, the ICTs are divided into four categories such as spatial technologies, identification technologies, data acquisition technologies and data communication technologies. The ICT based SWM systems classified in this paper are based on the first three technologies while the forth one is employed by almost every systems. This review may guide the reader about the basics of available ICTs and their application in SWM to facilitate the search for planning and design of a sustainable new system.
This study examined the combustion profile and kinetics of hydrochar produced from hydrothermal carbonisation (HTC) of Karanj fruit hulls (KFH). The HTC-KFH hydrochar combustion kinetics was investigated at 5, 10, and 20°C/min by thermogravimetric analysis. The kinetics model, Kissinger-Akahira-Sunose revealed the combustion kinetics parameters for the extent of conversion from 0.1 to 0.8; the activation energy varies from 114 to 67 kJ/mol respectively. The hydrochar combustion followed multi-steps kinetics; the Coats-Redfern models predicted the activation energies and pre-exponential constants for the hydrochar combustion zones. The diffusion models are the effective mechanism in the second and third zone.
During the past few years the scientific and medical community has been confronted with a continual interest in vitamin E with the interest prompted by new discoveries. Tocopherols and tocotrienols, commonly known as vitamin E, are extremely invaluable compounds and have various nutritional functionalities and benefits to human health. Great deals of research projects have been launched in order to develop effective methods for the extraction of vitamin E. By and large, three distinct extractive methods are usually employed: supercritical fluid extraction (SFE), molecular distillation, and adsorption methods. These methods are sensitive to different experimental conditions, such as pressure, temperature, and flow rate with noticeable effects on the efficiency of the extraction and enrichment of vitamin E. This review has covered the most commonly adapted extraction methods and has probed into the extraction yields under variable operational parameters.
Porcine gelatine is a common adulterant found in edible bird's nests (EBNs) used to increase the net weight prior to sale. This study aimed to develop indirect enzyme-linked immunosorbent assays (ELISAs) for porcine gelatine adulteration using anti-peptide polyclonal antibodies. Three indirect ELISAs were developed (PAB1, 2 and 3), which had limits of detection (LODs) of 0.12, 0.10 and 0.11 µg g(-1), respectively. When applied to standard solutions of porcine gelatine, the inter- and intra-assays showed coefficients of variation (CVs) less than 20% and were able to detect at least 0.5 ng µg(-1) (0.05%) porcine gelatine in spiked samples. The proposed ELISA offers attractions for quality control in the EBN industry.
WHAT IS KNOWN AND OBJECTIVE: It has been reported that more than 80% of out-of-hospital medication errors among the young children involve liquid formulations. The usefulness of pictorial aids to improve communication of medication instructions has not been extensively investigated for child health. The objective of this study was to determine the effectiveness of pictorial aids used to assist caregivers in the administration of liquid medications.
METHODS: MEDLINE, CINAHL, PsycINFO, ScienceDirect, Scopus and the Cochrane Library were searched for articles published up to February 2015. Studies that used pictorial aids with liquid medications and measured at least one of the following outcomes were included: dosing accuracy, comprehension of medication instructions, recall of information and adherence of caregivers. Two authors independently selected studies, extracted data and assessed methodological quality of studies using the Cochrane Collaboration's tool.
RESULTS AND DISCUSSION: Five experimental studies (four hospital based and one community based) with a total of 962 participants were included. A wide range of liquid formulations were studied, including both prescription and over-the-counter medications. The existing findings suggest that pictographic interventions reduced dosing errors, enhanced comprehension and recall of medication instructions and improved adherence of caregivers. Incorporating pictorial aids into verbal medication counselling or text-based instructions was more beneficial than using the single approach alone. Mixed results were identified for the relationship between health literacy of caregivers and effectiveness of pictorial aids.
WHAT IS NEW AND CONCLUSION: The evidence remains limited due to the small number of studies found and variations in methodological quality. This review suggests that pictorial aids might be potential interventions, but more high-quality studies are needed to support the routine use of any pictogram-based materials with liquid medications in the clinical settings.
KEYWORDS: caregivers; graphics; health literacy; medication adherence; medication errors; paediatrics
Matched MeSH terms: Patient Education as Topic/methods*; Health Communication/methods*
Several types of water treatment technologies including adsorption are now being used to treat polluted water. In this paper the removal of phenol by adsorption will be discussed. Activated carbons are successfully applied for purification of potable water and the removal of organic pollutants in wastwater. This paper is concerned with a low cost approach to treating waste water that is significant especially for those countries where oil palm is an available agricultural product like Malaysia, Ivory Coast, Nigeria, Thailand, Papua New Guinea. In the coastal region coconut is an available agricultural product and activated carbon prepared using coconut shell is also an economical method of water treatment. The materials used in this study were Commercial Activated Carbon (CAC), prepared from coconut shell and Modified Oil Palm Shell (MOPAS) of 1 to 2 mm diameters. The surface area of CAC and MOPAS was 38.5 m2/g and 38.2 m2/g respectively and the iodine number was determined as 674 and 454 for CAC and MOPAS, respectively. From the study the result shows above 70% removal efficiency for 5 mg/L and 40% removal efficiency for 20 mg/L of phenol solution. The performance efficiency will be discussed based on batch test, following Freundlich adsorption isotherm. The results indicate that CAC exhibits a higher adsorptive capacity (Kf of 0.079) as compared to MOPAS (Kf of 0.048). Hence a better removal efficiency for CAC at lower concentration of phenol. Results from column tests show a better adsorptive capacity for CAC (2.73) as compared to MOPAS (2.48).
Matched MeSH terms: Waste Disposal, Fluid/methods*; Water Purification/methods*
A wad of used chewing gum recovered from the scene of a burglary contained impressions of human teeth. Casts of these impressions displayed unique morphological characteristics which were found to show concordance with corresponding features present on casts of the posterior teeth of a suspect.
For broad-beam soft X-ray sources, assessment of the quality of image produced by such units is made complex by the low penetration capabilities of the radiation. In the present study we have tested the utility of several types of test tool, some of which have been fabricated by us, as part of an effort to evaluate several key image defining parameters. These include the film characteristic, focal-spot size, image resolution and detail detectability. The two sources of X-rays used in present studies were the University of Malaya flash X-ray device (UMFX1) and a more conventional soft X-ray tube (Softex, Tokyo), the latter operating at peak accelerating potentials of 20 kVp. We have established, for thin objects, that both systems produce images of comparable quality and, in particular, objects can be resolved down to better than 45 microm.
This paper describes a system using lensed optical fiber sensors that are arranged in the form of two orthogonal projections. The sensors are placed around a process vessel for upstream and downstream measurements. The purpose of the system is for on-line monitoring of particles and droplets being conveyed by a fluid. The lenses were constructed using a custom heating fixture. The fixture enables the lenses to be constructed with similar radii resulting in identical characteristics with minimum differences in transmitted intensity and emission angle. By collimating radiation from two halogen bulbs, radiation can be obtained by the sensors with radiation intensity related to the nature of the media. Each sensor interrogates a finite section of the measurement section. Each sensor provides a view. Parallel sensors provide a projection. Signal processing is carried out on the measured data in the time and frequency domains to investigate the latent information present in the flow signals.
The identification, characterization and quantification of crystal forms are becoming increasingly important within the pharmaceutical industry. A combination of different physical analytical techniques is usually necessary for this task. In this work solid-state techniques, diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) and X-ray powder diffractometry (XRPD) were combined to analyze polymorphic purity of crystalline ranitidine-HCl, an antiulcer drug, H2 receptor antagonists. A series of 12 different mixtures of Form 1 and 2 was prepared by geometric mixing and their DRIFT spectra and XRD powder patterns were obtained and analyzed, either alone or combined together, using Artificial Neural Networks (ANNs). A standard feed-forward network, with back-propagation rule and with multi layer perceptron architecture (MPL) was chosen. A working range of 1.0-100% (w/w) of crystal Form 2 in Form 1 was established with a minimum quantifiable level (MQL) of 5.2% and limit of detection of 1.5% (w/w). The results demonstrate that DRIFTS combined with XRPD may be successfully used to distinguish between the ranitidine-HCl polymorphs and to quantify the composition of binary mixtures of the two.
Fibreoptic intubation has been established as a major advance in the management of difficult or failed intubation in the awake patient. If necessary, it may be performed under general anaesthesia with either spontaneous or controlled ventilation. This should be considered early in the management of failed intubation, before multiple attempts with other techniques lead to haemorrhage and oedema in the airway. We describe here selected case reports to illustrate this in 8 different situations. This is followed by a brief review of the technique and indications of fibreoptic intubation.
An analysis was carried out on a total of 883 cold chain monitor (CCM) cards, which had been attached to batches of poliomyelitis, measles, DPT (diphtheria, pertussis, tetanus) and hepatitis B vaccines, during their transport and storage from the central store in Kuala Lumpur to Kelantan, a state in north-eastern Malaysia; 234 freeze watches attached to hepatitis B vaccines were also analysed. The monitor cards and freeze watches were observed at six levels between the central store and the periphery during distribution of the vaccines, and a colour change in any of the four windows (A, B, C, D) on the CCM cards or the freeze watches was recorded. In addition, 33 unopened vials of oral poliovirus vaccine (OPV), collected from refrigerators in 29 health facilities in Kelantan, were tested for potency using the tissue culture infective dose 50 (TCID50) method; 14 of them (42%) did not meet the WHO criteria for potent vaccines. The results showed that at the final destination 13.4% of all cards remained white while a colour change to blue was observed in 65% in window A, 16.6% in window B, and 4.4% in window C; none had turned blue in window D indicating that the vaccine had not been subjected to temperatures > or = 34 degrees C for 2 hours. All but 2 of the 234 freeze watches had turned purple, which indicates exposure of the hepatitis B vaccines to temperatures below 0 degree C. These results will assist health planners to correct the weaknesses identified in the cold chain system.
Matched MeSH terms: Drug Storage/methods; Transportation/methods*
The advent of recombinant DNA technology has already made a significant impact on various aspects related to the basic understanding of pathogenic mechanisms in infectious diseases, as well as practical applications related to diagnostics and prevention. The present paper discusses recent technological innovations and increased analytical capabilities which promise to have an even more significant impact on the control of viral and bacterial diseases.
Matched MeSH terms: Molecular Biology/methods; Medical Laboratory Science/methods
The slow adoption of integrated pest management (IPM) has been attributed to the widespread gaps in farmers' knowledge of rational pest management. Other factors such as farmers' perception of high input use and promotion of pesticides also influence decisions to practise rational pest management. To bridge these gaps and improve farmers' pest management practices, most IPM implementation programmes rely on communication strategies. These communication approaches utilize either mass media or interpersonal channels or a combination. The choice of which communication approach to employ depends on project objectives and resources. Among extension and communication approaches used in crop protection, strategic extension campaigns, farmer field schools and farmer participatory research stand out in their ability to bring about significant changes in farmers' pest management practices. While extension campaigns have greater reach, farmer participation and experiential learning achieve more impact because learning effects are sustained. Communication media are important in raising awareness and creating a demand for IPM information but interpersonal channels and group methods such as the farmer field school and farmer participatory research are essential to accomplish the tasks of discovery and experiential learning of IPM skills.
Matched MeSH terms: Agriculture/methods*; Pest Control/methods*
In situ hybridisation (ISH) is based on the complementary pairing of labelled DNA or RNA probes with normal or abnormal nucleic acid sequences in intact chromosomes, cells or tissue sections. Compared with other molecular biology techniques applicable to anatomical pathology, ISH enjoys better rapport with histopathologists because of its similarity to immunohistochemistry. It has the unique advantage over other molecular biology techniques--largely based on probe hybridisation with nucleic acid extracted from homogenised tissue samples--of allowing localisation and visualisation of target nucleic acid sequences within morphologically identifiable cells or cellular structures. Probes for ISH may bear radioactive or non-radioactive labels. Isotopic probes (3H, 32P, 35S, 125I) are generally more sensitive than non-isotopic ones but are less stable, require longer processing times and stringent disposal methods. Numerous non-isotopic labels have been used; of these biotin and digoxigenin are the reporters of choice. Optimised non-isotopic systems of equivalent sensitivity to those which use radioactive-labelled probes have been described. In ISH, finding the optimal balance between good morphological preservation of cells and strong hybridisation signals is crucial. Tissue fixation and retention of cytoskeletal structures, unfortunately, impede diffusion of probes into tissues. ISH sensitivity is also influenced by inherent properties of the probe and hybridisation conditions. Although ISH is largely a research tool, it is already making strong inroads into diagnostic histopathology. It has been applied for the detection of various infective agents particularly CMV, HPV, HIV, JC virus, B19 parvovirus, HSV-1, EBV, HBV, hepatitis delta virus, Chlamydia trachomatis, salmonella and mycoplasma in tissue sections.(ABSTRACT TRUNCATED AT 250 WORDS)
Matched MeSH terms: Tissue Fixation/methods*; In Situ Hybridization/methods*
Forest growth models are useful tools for investigating the long-term impacts of logging. In this paper, the results of the rain forest growth model FORMIND were assessed by a multicriteria decision analysis. The main processes covered by FORMIND include tree growth, mortality, regeneration and competition. Tree growth is calculated based on a carbon balance approach. Trees compete for light and space; dying large trees fall down and create gaps in the forest. Sixty-four different logging scenarios for an initially undisturbed forest stand at Deramakot (Malaysia) were simulated. The scenarios differ regarding the logging cycle, logging method, cutting limit and logging intensity. We characterise the impacts with four criteria describing the yield, canopy opening and changes in species composition. Multicriteria decision analysis was used for the first time to evaluate the scenarios and identify the efficient ones. Our results plainly show that reduced-impact logging scenarios are more 'efficient' than the others, since in these scenarios forest damage is minimised without significantly reducing yield. Nevertheless, there is a trade-off between yield and achieving a desired ecological state of logged forest; the ecological state of the logged forests can only be improved by reducing yields and enlarging the logging cycles. Our study also demonstrates that high cutting limits or low logging intensities cannot compensate for the high level of damage caused by conventional logging techniques.
Matched MeSH terms: Conservation of Natural Resources/methods*; Forestry/methods*