Displaying publications 61 - 80 of 102 in total

Abstract:
Sort:
  1. Physico-chemical characteristics and sensory evaluation of wheat bread partially substituted with banana (Musa acuminata X balbisiana cv. Awak) pseudo-stem flour
    Ho LH, Abdul Aziz NA, Azahari B
    Food Chem, 2013 Aug 15;139(1-4):532-9.
    PMID: 23561142 DOI: 10.1016/j.foodchem.2013.01.039
    The physico-chemical and sensorial properties of the control (BCtr), commercial wheat flour (CWF) bread substituted with 10% BPF (banana pseudo-stem flour) (B10BPF) and B10BPF with added 0.8% w/w (flour weight basis) xanthan gum (XG) or sodium carboxymethylcellulose (CMC) (B10BPFXG and B10BPFCMC, respectively) were examined. The proximate analyses revealed that the composite bread had significantly higher moisture, ash, crude fibre, soluble, insoluble and total dietary fibre contents but lower protein, fat and carbohydrate contents than the BCtr. Bread incorporated with BPF resulted in a lower volume, darker crumb and lighter crust colour than the BCtr. The addition of CMC improved the bread volume. All breads containing BPF had greater total phenolics, and antioxidant properties than the control bread. Sensory evaluation indicated that the B10BPFCMC bread had the highest acceptability.
    Matched MeSH terms: Flour/analysis*
  2. Fulltext The Development of Expanded Snack Product Made from Pumpkin Flour-Corn Grits: Effect of Extrusion Conditions and Formulations on Physical Characteristics and Microstructure
    Nor NM, Carr A, Hardacre A, Brennan CS
    Foods, 2013 May 14;2(2):160-169.
    PMID: 28239106 DOI: 10.3390/foods2020160
    Pumpkin products confer natural sweetness, desirable flavours and β-carotene, a vitamin A precursor when added as ingredients to extruded snacks. Therefore, a potential use for dried pumpkin flour is as an ingredient in ready-to-eat (RTE) snack foods. Growth in this market has driven food manufacturers to produce a variety of new high value snack foods incorporating diverse ingredients to enhance the appearance and nutritional properties of these foods. Ready-to-eat snacks were made by extruding corn grits with 5%, 10%, 15% and 20% of pumpkin flour. Snacks made from 100% corn grits were used as control products for this work. The effect of formulation and screw speeds of 250 rpm and 350 rpm on torque and specific mechanical energy (SME, kWh/kg), physical characteristics (expansion ratio, bulk density, true density and hardness) and the microstructure of the snacks were studied. Increasing the screw speed resulted in a decrease of torque for all formulations. When pumpkin flour was added the specific mechanical energy (SME) decreased by approximately 45%. Increasing the percentage of pumpkin flour at the higher screw speed resulted in a harder texture for the extruded products. X-ray tomography of pumpkin flour-corn grit snacks showed that increased levels of pumpkin flour decreased both the bubble area and bubble size. However, no significant differences (p > 0.05) in bubble wall thickness were measured. By understanding the conditions during extrusion, desirable nutritional characteristics can be incorporated while maximizing expansion to make a product with low bulk density, a fine bubble structure and acceptable organoleptic properties.
    Matched MeSH terms: Flour
  3. Fulltext Fibre from pumpkin (Cucurbita pepo L.) seeds and rinds: physico-chemical properties, antioxidant capacity and application as bakery product ingredients
    Nyam, K.L., Lau, M., Tan, C.P.
    Malays J Nutr, 2013;19(1):99-109.
    MyJurnal
    Introduction: The aims of this study were to determine the proximate composition, functional properties and antioxidant activity of pumpkin seeds and rind. Besides, the effects of dietary fibre in pumpkin seeds and rinds on bread qualities and properties were evaluated. Methods: Formulations for bread substituted with 0%, 5% and 10% pumpkin seed and rind, respectively were produced. Sensory evaluation of the prepared bread samples for such attributes as appearance, aroma, flavour, texture and overall acceptability was undertaken. The physical properties of the bread samples, including dough expansion, loaf volume, crumb colour and bread texture, were determined. Proximate analysis and determination of antioxidant activity of the bread samples were also conducted. Results: Crude fibre of the pumpkin seeds and pumpkin rinds was high at 31.48% and 14.83%, respectively. The total phenolic compound (TPC) and DPPH radical scavenging activity for the pumpkin rinds were 38.60 mg GAE/ 100 g dry weight and 69.38%, respectively, which were higher than those of pumpkin seeds. A 5% level of pumpkin rind bread gave the best overall acceptability and sensory attributes, followed by 5% pumpkin seed bread. Total dietary fibre, total phenolic compound and DPPH radical scavenging activity in breads substituted with 5% pumpkin seed and 5% pumpkin rind flour were higher than the values in control bread. Conclusion: Pumpkin seeds and rinds can be used as dietary fibre sources in bakery.
    Matched MeSH terms: Flour
  4. Fulltext The effect of addition of oyster mushroom (Pleurotus sajor-caju) on nutrient composition and sensory acceptation of selected wheat- and rice-based products
    Aishah, M.S., Wan Rosli, W.I.
    International Food Research Journal, 2013;20(1):183-188.
    MyJurnal
    Mushroom cultivation has been more popular recently in Malaysia. They are favoured due to their delicious flavour and low calorific value. Apart from that, they also contain high amount of protein and other essential nutrients. As recommended by food pyramid, people should take in more of their calories from whole grains-based foods than any other sources. Three selected carbohydrate based products namely rice-porridge (RP), paratha flat bread (PB) and conventional cake (CC) were formulated with dried Pleurotus sajor-caju (PSC) powder. All three products were analyzed for proximate analysis and sensory evaluation. Result shows the percentage of moisture, ash, fat and protein of RP increased in line with the levels of PSC powder used except for carbohydrate. Whereas for PB and CCs added with 2%, 4% and 6% PSC, the percentage of all nutrients were higher than control (0%) except for fat. Mushroombased RP had significantly higher value of odour attribute as compared to control, with RP added with 6% PSC powder received the highest score. Meanwhile, mushroom-based PB received better score on textural attribute compared the control. In CC, panels prefer the cake added with 4% PSC powder as they gave higher scores for softness and flavour attributes. In conclusion, addition of PSC powder to partially replace rice and wheat flour in RP, CC and PB enhance essential nutritional components and well accepted by consumers. Thus, PSC powder can be considered to be utilized in carbohydrate–based food products with the purpose of enhancing nutrient compositions without affecting its sensory acceptance.
    Matched MeSH terms: Flour
  5. Fulltext Dough mixing and thermal properties including the pasting profiles of composite flour blends with added hydrocolloids
    Ho, L. H., Noor Aziah, A. A.
    International Food Research Journal, 2013;20(2):911-917.
    MyJurnal
    Dough mixing and thermal properties including the pasting profiles of various commercial wheat flour (WF)-banana pseudostem flour (BP)-hydrocolloid blends were determined using a farinograph, differential scanning calorimetry (DSC) and a rapid-visco analyser (RVA). The prepared blends were WF, WF substituted with 10% BP (10BP) and 10BP with added 0.8% w/w (flour weight basis) xanthan gum (XG) or sodium carboxymethylcellulose (CMC) (10BPX and 10BPC, respectively). The dough of 10BP and the doughs containing XG or CMC reduced stability and breakdown time compared with the WF dough. All dough containing BP demonstrated greater water absorption and mixing tolerance index values than the WF dough. The substitution of 10% BP into WF and the addition of hydrocolloids did not significantly affect the conclusion temperature (Tc) of the mixture, but did increased the onset temperature (To), peak temperature (Tp) and decreased the gelatinisation enthalpy change (ΔHg) of the blends. Samples of 10BP, 10BPX and 10BPC significantly decreased (p
    Matched MeSH terms: Flour
  6. Mycoremediation--a prospective environmental friendly technique of bioseparation and dewatering of domestic wastewater sludge
    Molla AH, Fakhru'l-Razi A
    Environ Sci Pollut Res Int, 2012 Jun;19(5):1612-9.
    PMID: 22134862 DOI: 10.1007/s11356-011-0676-0
    INTRODUCTION: Environmental safe and friendly management and disposal of wastewater sludge is a problem of every treatment plant throughout the world. Bioseparation and dewaterability of raw domestic wastewater sludge were evaluated for proper management and disposal by mycoremediation, i.e., using prior grown 2% (v/v) spore suspension of filamentous fungal (Mucor hiemalis Wehmer) broth inoculation, which were grown in 2% (w/v) solution of malt extract and wheat flour for 48-60 h in orbital shaker.

    DISCUSSION: Within 2-3 days of treatment application, encouraging results were achieved in total dry solids (TDS), total suspended solid (TSS), turbidity, chemical oxygen demand (COD), specific resistance to filtration (SRF), and pH due to fungal treatment in recognition of bioseparation and dewaterability of wastewater sludge compared to control. The significant reduction of TDS was remarked at fungal biomass (FB) in wheat flour (WF) treatment. The removal of TSS, turbidity, COD, and SRF were observed 96.0%, 99.4%, 92.6%, and 97.6%, respectively, in supernatant at 5 days by FB in WF. The SRF measuring the dewaterability was decreased with maximum (0.26 × 10(-12) mg/kg) equivalent to 95.5% at 2 days in FB in WF also. FB in WF broth is a potential, environmental friendly, comparatively low-cost biological technique which might play the significant role for bioremediation and bioseparation of domestic wastewater sludge. The present technique may bring a dynamic change in treatment of wastewater in future.

    Matched MeSH terms: Flour
  7. Fulltext Mixed biopolymer systems based on starch
    Abd Elgadir M, Akanda MJ, Ferdosh S, Mehrnoush A, Karim AA, Noda T, et al.
    Molecules, 2012 Jan 09;17(1):584-97.
    PMID: 22231495 DOI: 10.3390/molecules17010584
    A binary mixture of starch-starch or starch with other biopolymers such as protein and non-starch polysaccharides could provide a new approach in producing starch-based food products. In the context of food processing, a specific adjustment in the rheological properties plays an important role in regulating production processing and optimizing the applicability, stability, and sensory of the final food products. This review examines various biopolymer mixtures based on starch and the influence of their interaction on physicochemical and rheological properties of the starch-based foods. It is evident that the physicochemical and rheological characteristics of the biopolymers mixture are highly dependent on the type of starch and other biopolymers that make them up mixing ratios, mixing procedure and presence of other food ingredients in the mixture. Understanding these properties will lead to improve the formulation of starch-based foods and minimize the need to resort to chemically modified starch.
    Matched MeSH terms: Flour
  8. Fulltext Antioxidant property enhancement of sweet potato flour under simulated gastrointestinal pH
    Chan KW, Khong NM, Iqbal S, Umar IM, Ismail M
    Int J Mol Sci, 2012;13(7):8987-97.
    PMID: 22942747 DOI: 10.3390/ijms13078987
    Sweet potato is known to be rich in healthful antioxidants, but the stability of its antioxidant properties under gastrointestinal pH is very much unknown. Hence, this study aimed to evaluate the changes in antioxidant properties (total contents of phenolics and flavonoids as well as antioxidant activity) of sweet potato flour (SPF) under simulated gastrointestinal pH conditions. It was found that the yield of SPF crude phenolic extract increased from 0.29 to 3.22 g/100 g SPF upon subjection to gastrointestinal pH conditions (p < 0.05). Also elevated significantly were the total phenolic content (TPC), total flavonoid content (TFC) and antioxidant activity of SPF (p < 0.05). In summary, the antioxidant properties of SPF were enhanced under gastrointestinal pH conditions, suggesting that SPF might possess a considerable amount of bound phenolic and other antioxidative compounds. The antioxidant properties of SPF are largely influenced by pH and thus might be enhanced during the in vivo digestive process.
    Matched MeSH terms: Flour*
  9. Fulltext Simulated gastrointestinal pH condition improves antioxidant properties of wheat and rice flours
    Chan KW, Khong NM, Iqbal S, Ismail M
    Int J Mol Sci, 2012;13(6):7496-507.
    PMID: 22837707 DOI: 10.3390/ijms13067496
    The present study was conducted to evaluate the antioxidant properties of wheat and rice flours under simulated gastrointestinal pH condition. After subjecting the wheat and rice flour slurries to simulated gastrointestinal pH condition, both slurries were centrifuged to obtain the crude phenolic extracts for further analyses. Extraction yield, total contents of phenolic and flavonoids were determined as such (untreated) and under simulated gastrointestinal pH condition (treated). 1,1-diphenyl-2-picrylhydrazyl radical (DPPH(•)) scavenging activity, 2,2'-azino-bis(3-ethylbenzthiazoline-6-sulphonic acid) radical cation (ABTS(•+)) scavenging activity, ferric reducing antioxidant power (FRAP), beta-carotene bleaching (BCB) and iron chelating activity assays were employed for the determination of antioxidant activity of the tested samples. In almost all of the assays performed, significant improvements in antioxidant properties (p < 0.05) were observed in both flours after treatment, suggesting that wheat and rice flours contain considerably heavy amounts of bound phenolics, and that their antioxidant properties might be improved under gastrointestinal digestive conditions.
    Matched MeSH terms: Flour*
  10. Glycemic responses of patients with type 2 diabetes to individual carbohydrate-rich foods and mixed meals
    Robert SD, Ismail AA
    Ann Nutr Metab, 2012;60(1):27-32.
    PMID: 22212476 DOI: 10.1159/000335224
    Our purpose was to determine whether the glycemic index (GI) of individual foods applies to mixed meals.
    Matched MeSH terms: Flour
  11. Fulltext Physicochemical and organoleptic properties of cookies incorporated with legume flour
    Noor Aziah, A.A., Mohamad Noor, A.Y., Ho, L.H.
    International Food Research Journal, 2012;19(4):1539-1543.
    MyJurnal
    This study was to investigate the effects of wheat flour substitution with legume flour (mung bean and chick pea) in cookies in terms of the physicochemical and organoleptic properties. Three formulations of cookies were prepared from (a) Control (100% wheat flour), (b) Mung bean (50% wheat flour + 35% mung bean flour + 15% corn flour) and (c) Chickpea (50% wheat flour + 35% chickpea flour + 15% corn flour). The physicochemical and organoleptic attributes of the three types of cookie were evaluated. Results showed significant different (p
    Matched MeSH terms: Flour
  12. Fulltext The effects of egg white powder addition with tapioca and sago flours on physicochemical and sensory properties of duck sausage
    Muthia, D., Huda, N., Ismail, N., Easa, A.M.
    International Food Research Journal, 2012;19(4):1415-1421.
    MyJurnal
    The objective of this study was to evaluate the effects of using tapioca and sago flours with or without egg white powder (EWP) on the physicochemical and sensory properties of duck sausages. There was significant increase (P0.05) in hardness and cohesiveness attributes among all the samples examined but significant differences (P
    Matched MeSH terms: Flour
  13. Fulltext Identification of predominant Lactobacillus species in liquid sourdough fermentation
    Kam, W.Y., Wan Aida, W.M., Sahilah, A.M.
    International Food Research Journal, 2012;19(4):1739-1743.
    MyJurnal
    Two high protein wheat flour samples of Red Horse (RH) and Bake with Yen (BY) were examined for predominant Lactobacillus spp. in fermented liquid sourdough. The identification of Lactobacillus spp. was based on biochemical tests of catalase test, gas carbon dioxide production, arginine test, the ability to grow at temperature of 15°C and 45°C and carbohydrate fermentation using API50CH kit. Those strains were identified as Lactobacillus spp. and confirmed using polymerase chain reaction (PCR) of 16S rRNA partial sequencing analysis. In the present study, we successfully isolated and identified the Lactobacillus plantarum and L. fermentum which were predominant bacteria in liquid sourdough of the sample RH and BY brand, respectively.
    Matched MeSH terms: Flour
  14. Fulltext Mineral composition and pasting properties of banana pseudo-stem flour from Musa acuminata X balbisiana cv. Awak grown locally in Perak, Malaysia
    Ho, L.H., Noor Aziah, A.A., Rajeev Bhat
    International Food Research Journal, 2012;19(4):1479-1485.
    MyJurnal
    The banana pseudo-stem is not currently utilised in the food industry. The aim of this research was to investigate the chemical and pasting profile of banana pseudo-stem flour (BPF). Wheat flour were substituted with BPF (0, 5, 15 and 30%) and the pasting profile were determined. Results from mineral analysis showed that the levels of sodium (Na), potassium (K), calcium (Ca), magnesium (Mg) and phosphorus (P) were higher than those of iron (Fe), zinc (Zn) and manganese (Mn). The BPF had a 0.04% total titratable acidity (TTA) and a total soluble solid (TSS) of 1.30⁰ Brix with pH 5.41. BPF contained 28.26% total starch, 12.81% resistant starch and a total digestible starch value of 15.45%. An increased substitution level of BPF into wheat flour significantly (p
    Matched MeSH terms: Flour
  15. Fulltext Effect of orange sweet potato (Ipomoea batatas) flour on the physical properties of fried extruded fish crackers
    Cheow, C.S., Noorakmar, A.W., Norizzah, A.R., Mohd Zahid, A., Ruzaina, I.
    International Food Research Journal, 2012;19(2):657-664.
    MyJurnal
    The effects of orange sweet potato flour addition to tapioca starch on the expansion, oil absorption,
    bulk density, water absorption index (WAI), water solubility index (WSI), hardness and colour of fried extruded fish crackers were investigated. The microstructure properties were assessed by Field Emission Scanning Electron Microscope (FESEM) and the sensory properties of fried extruded fish crackers were determined by quantitative descriptive analysis method. The shape and texture of the product were similar to that of normal breakfast cereal. Light brownish and slightly harder texture was obtained with addition of orange sweet potato flour to tapioca starch in the fried extruded fish crackers. The bulk density and water solubility index (WSI) increased with the increase in orange sweet potato flour addition. However, water absorption index (WAI), linear expansion, expansion ratio, volume expansion and oil absorption decreased as the amount of orange sweet potato increased. The microstructure studies revealed that fried extruded fish crackers with high percentage of orange sweet potato flour had small air cells and thick cell wall. The fried extruded fish crackers with 30% fish, 14% orange sweet potato flour and 56% tapioca starch had high crispiness score and accepted by the trained panellists.
    Matched MeSH terms: Flour
  16. Fulltext Quality evaluation of steamed wheat bread substituted with green banana flour
    Noor Aziah, A. A., Ho, L. H., Noor Shazliana, A. A., Rajeev, B.
    International Food Research Journal, 2012;19(3):869-876.
    MyJurnal
    Quality attributes of steamed bread without green banana flour (BF) (CON), substituted with 30%
    BF (BBFI) and 30% BF + 8% gluten (BBFII) were determined. The green banana flour (BF) and the mixture of wheat flour (WF) substituted with 30% BF + 8% gluten (FBFII) was significantly highest in water holding capacity and oil holding capacities, respectively. Potassium, calcium and magnesium were significantly higher in BBFI and BBFII than CON. Significantly highest insoluble dietary fibre and total dietary fibre shown in BBFI. Steaming resulted significant reduction in resistant starch content in BBFI as compared with the dough of BBFI I. The specific volume of BBFII and CON showed significant different compared to the BBFI. The BBFII spread ratio was significantly highest and steamer spring lowest than CON. BBFII showed significantly highest in hardness and adhesiveness values but CON was significantly highest in cohesiveness, elasticity and chewiness. L and Hue values was shown highest in CON. BBFII indicated highest acceptability score than other samples.
    Matched MeSH terms: Flour
  17. Fulltext Optimization of cassava peel medium to an enriched animal feed by the white rot fungi Panus tigrinus M609RQY
    Tijani, I.D.R., Jamal, P., Alam, M.Z., Mirghani, M.E.S.
    International Food Research Journal, 2012;19(2):427-432.
    MyJurnal
    Media components such as wheat flour, MgSO4 and particle size were screened by Placket Burman design (PBD) while the operating range was fixed by one-factor-at-a-time method (OFAT), primarily for the enrichment of cassava peels as animal feed. Optimization of the selected media components was carried out using Face–Centered Central Composite Design (FCCCD) of the Response Surface Methodology (RSM) and the responses were measured in term of protein and lignin contents. Statistical analysis of the result showed that the quadratic term of wheat flour and the interaction between wheat flour and particle size were highly significant (P
    Matched MeSH terms: Flour
  18. Fulltext Development of reduced calorie chocolate cake with jackfruit seed (Artocarpus heterophyllus Lam.) flour and polydextrose using response surface methodology (RSM)
    Siti Faridah, M.A., Noor Aziah, A.A.
    International Food Research Journal, 2012;19(2):515-519.
    MyJurnal
    Response Surface Methodology (RSM) with Central Composite Rotatable Design (CCRD) was performed in this study to develop an acceptable reduced calorie chocolate cake. The range of the independent variables, namely Jackfruit Seed (JFS) flour (20-25% replacement of wheat flour) and polydextrose (10-15% replacement of sucrose) were identified which affect the volume, specific volume, symmetry and uniformity of the chocolate cake. The coefficient of determination, R2 values for volume, specific volume, symmetry and uniformity were greater than 0.900. The optimum level for replacement of sugar with polydextrose was at 11% and wheat flour with JFS flour was at 16% with calorie reduction approximately 34% from the control cake formulation.
    Matched MeSH terms: Flour
  19. Fulltext Electrical resistivity, thermal stability and tensile strength of rice husk flour-plastic waste composites
    Shahril Anuar Bahari, Kamrie Kamlon, Masitah Abu Kassim
    Scientific Research Journal, 2012;9(2):0-0.
    MyJurnal
    In this study, the rice husk flour-plastic waste composites (RPC) was produced from polypropylene (PP) and high density polyethylene (HDPE) wastes with 30 and 50% rice husk flour (RHF) contents. RPC was made by melt compounding and compression moulding processes. The electrical resistivity, thermal stability and tensile strength of RPC were determined. The RPC was tested in electrical resistivity and tensile strength according to the ASTM D-257 and ASTM D-638 respectively, while thermal stability was tested using thermogravimetric analysis (TGA) method. From the results, high content of RHF reduces all properties, except for tensile modulus of elasticity (TMOE) in tensile strength test. The ability of moisture absorption and the presence of hemicelluloses, cellulose and silica in RHF reduce the electrical resistivity and thermal stability behaviour of RPC from 50% RHF. The good binding elements and filler agglomeration in RPC from 50% RHF improve only TMOE. Insufficient stress transfer and rigid interphase occurred between RHF and plastics during tensile maximum load and elongation at break (Eb) in tensile strength test. In general, RPC from HDPE indicates better thermal stability, tensile modulus of rupture and Eb (in tensile strength test) compared to PP, based on the good behaviour of thermal conductivity, low water absorption, high molecular weight and good elongation properties of HDPE. However, RPC from PP shows good electrical resistance due to the low thermal expansion coefficient of PP.
    Matched MeSH terms: Flour
  20. Fulltext Total phenolics, flavonoids and antioxidant activity of banana pulp and peel flours: influence of variety and stage of ripeness
    Fatemeh, S. R., Saifullah, R., Abbas, F. M. A., Azhar, M. E.
    International Food Research Journal, 2012;19(3):1041-1046.
    MyJurnal
    The influence of variety (Cavendish and Dream), stage of ripeness (green and ripe) and parts (pulp and peel) on antioxidative compounds and antioxidant activity of banana fruit was investigated. The TPC and TFC ranged widely from 75.01 to 685.57 mg GAE/100 g and 39.01 to 389.33 mg CEQ/100 g of dry matter respectively. Cavendish banana flour contained higher TPC and TFC compared to Dream variety. TPC and TFC values of banana peel were higher than those of banana pulp. Also, green banana showed higher TPC and TFC values than those of ripe fruit. Radical scavenging activities (inhibition of DPPH) of the extracts ranged from 26.55 to 52.66%. Although Dream banana peel extracts appeared to have low TPC and TFC, its antioxidant activities were ranked moderate to high. This implies that antioxidative compounds other than phenolics and flavonoids were probably responsible for inhibition of DPPH.
    Matched MeSH terms: Flour
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links