Displaying publications 81 - 100 of 183 in total

Abstract:
Sort:
  1. Observation of tt[over ¯]H Production
    Sirunyan AM, Tumasyan A, Adam W, Ambrogi F, Asilar E, Bergauer T, et al.
    Phys Rev Lett, 2018 Jun 08;120(23):231801.
    PMID: 29932697 DOI: 10.1103/PhysRevLett.120.231801
    The observation of Higgs boson production in association with a top quark-antiquark pair is reported, based on a combined analysis of proton-proton collision data at center-of-mass energies of sqrt[s]=7, 8, and 13 TeV, corresponding to integrated luminosities of up to 5.1, 19.7, and 35.9  fb^{-1}, respectively. The data were collected with the CMS detector at the CERN LHC. The results of statistically independent searches for Higgs bosons produced in conjunction with a top quark-antiquark pair and decaying to pairs of W bosons, Z bosons, photons, τ leptons, or bottom quark jets are combined to maximize sensitivity. An excess of events is observed, with a significance of 5.2 standard deviations, over the expectation from the background-only hypothesis. The corresponding expected significance from the standard model for a Higgs boson mass of 125.09 GeV is 4.2 standard deviations. The combined best fit signal strength normalized to the standard model prediction is 1.26_{-0.26}^{+0.31}.
    Matched MeSH terms: Biometry
  2. Fulltext Lead Concentration in Long-Tailed Macaque (Macaca fascicularis) Hair in Kuala Selangor, Malaysia
    Hassim NA, Hambali K, Idris NSU, Amir A, Ismail A, Zulkifli SZ, et al.
    Trop Life Sci Res, 2018 Jul;29(2):175-186.
    PMID: 30112148 MyJurnal DOI: 10.21315/tlsr2018.29.2.12
    Long-tailed macaque (Macaca fascicularis) has the potential to be a good biological indicator for toxic exposure because they have an almost similar physiology and behaviour to humans. The objective of this study is to determine the concentration of lead (Pb) in hair samples of long-tailed macaques which were found in and out of the Kuala Selangor Nature Park (KSNP) area. The hypothesis is long-tailed macaques that live in the anthropogenic area (outside KSNP) may be exposed to high levels of lead compared to long-tailed macaques living in the forest area (inside KSNP). Analysis of hair samples were carried out using Inductively Coupled Plasma-Mass Spectrometry (ICP-MS). The study found that the average mean of lead concentration in the anthropogenic area is 6.31 μg/g while for the forest area it is 3.16 μg/g. Lead concentration in the two areas are statistically insignificant. Nevertheless, lead concentration in the anthropogenic area recorded a slightly higher mean concentration than in the forest area. Even so, results of this study indicate that long-tailed macaques in Kuala Selangor are not exposed to high levels of lead. This study is the first in Malaysia to utilise long-tailed macaques as a biological indicator for testing the concentration of toxic substances in the environment. This study is still in its early stages; thus, future research requires improvements.
    Matched MeSH terms: Biometry
  3. Identification of green energy ranunculaceous flora of district Chitral, Northern Pakistan using pollen features through scanning electron microscopy
    Ahmad M, Zafar M, Sultana S, Ahmad M, Abbas Q, Ayoub M, et al.
    Microsc Res Tech, 2018 Sep;81(9):1004-1016.
    PMID: 30303585 DOI: 10.1002/jemt.23066
    Pollen micro-morphological features have proven to be helpful for the plant taxonomists in the identification and classification of plants. The utilization of this plantmayhelpfulin the areas of lignocellulosic conversion to biofuels and diversify application toward biomass. The current study was planned with the aim to evaluate the pollen features of complex Ranunculaceous flora of District Chitral, Northern Pakistan using both scanning electron microscopy (SEM) and Light Microscope (LM) for their taxonomic importance. Pollens of 18 Ranunculaceous species belonging to 6 genera were collected from different localities of the research area. SEM and LM were used to examine both qualitative and quantitative micro-morphological features. Sculptring of the sexine include; Scabrate, psilate, echinate, verrucate, perforate gemmate, and reticulate and so forth. Shape of the pollens was sub-spheroidal, spheroidal, prolate, subprolate and oblate and so forth. Type of pollen was ranged from mono to tricolpate and tricolporate. Quantitative characters include length/width of the pollen, colpus, exine thickness, and P/E ratio. Based on these micro-morphological features a taxonomic key was prepared for the fast and correct identification. RESEARCH HIGHLIGHT: Study of the pollen micro-morphological features of Ranunculaceous species by SEM and LM. Analysing both qualitative and quantitative characters of the pollens. Preparation of taxonomic key based on micro-morphological features for the correct and fast identification.
    Matched MeSH terms: Biometry
  4. Real-Time Remote Health Monitoring Systems Using Body Sensor Information and Finger Vein Biometric Verification: A Multi-Layer Systematic Review
    Mohsin AH, Zaidan AA, Zaidan BB, Albahri AS, Albahri OS, Alsalem MA, et al.
    J Med Syst, 2018 Oct 16;42(12):238.
    PMID: 30327939 DOI: 10.1007/s10916-018-1104-5
    The development of wireless body area sensor networks is imperative for modern telemedicine. However, attackers and cybercriminals are gradually becoming aware in attacking telemedicine systems, and the black market value of protected health information has the highest price nowadays. Security remains a formidable challenge to be resolved. Intelligent home environments make up one of the major application areas of pervasive computing. Security and privacy are the two most important issues in the remote monitoring and control of intelligent home environments for clients and servers in telemedicine architecture. The personal authentication approach that uses the finger vein pattern is a newly investigated biometric technique. This type of biometric has many advantages over other types (explained in detail later on) and is suitable for different human categories and ages. This study aims to establish a secure verification method for real-time monitoring systems to be used for the authentication of patients and other members who are working in telemedicine systems. The process begins with the sensor based on Tiers 1 and 2 (client side) in the telemedicine architecture and ends with patient verification in Tier 3 (server side) via finger vein biometric technology to ensure patient security on both sides. Multilayer taxonomy is conducted in this research to attain the study's goal. In the first layer, real-time remote monitoring studies based on the sensor technology used in telemedicine applications are reviewed and analysed to provide researchers a clear vision of security and privacy based on sensors in telemedicine. An extensive search is conducted to identify articles that deal with security and privacy issues, related applications are reviewed comprehensively and a coherent taxonomy of these articles is established. ScienceDirect, IEEE Xplore and Web of Science databases are checked for articles on mHealth in telemedicine based on sensors. A total of 3064 papers are collected from 2007 to 2017. The retrieved articles are filtered according to the security and privacy of telemedicine applications based on sensors. Nineteen articles are selected and classified into two categories. The first category, which accounts for 57.89% (n = 11/19), includes surveys on telemedicine articles and their applications. The second category, accounting for 42.1% (n = 8/19), includes articles on the three-tiered architecture of telemedicine. The collected studies reveal the essential need to construct another taxonomy layer and review studies on finger vein biometric verification systems. This map-matching for both taxonomies is developed for this study to go deeply into the sensor field and determine novel risks and benefits for patient security and privacy on client and server sides in telemedicine applications. In the second layer of our taxonomy, the literature on finger vein biometric verification systems is analysed and reviewed. In this layer, we obtain a final set of 65 articles classified into four categories. In the first category, 80% (n = 52/65) of the articles focus on development and design. In the second category, 12.30% (n = 8/65) includes evaluation and comparative articles. These articles are not intensively included in our literature analysis. In the third category, 4.61% (n = 3/65) includes articles about analytical studies. In the fourth category, 3.07% (n = 2/65) comprises reviews and surveys. This study aims to provide researchers with an up-to-date overview of studies that have been conducted on (user/patient) authentication to enhance the security level in telemedicine or any information system. In the current study, taxonomy is presented by explaining previous studies. Moreover, this review highlights the motivations, challenges and recommendations related to finger vein biometric verification systems and determines the gaps in this research direction (protection of finger vein templates in real time), which represent a new research direction in this area.
    Matched MeSH terms: Biometry/methods*
  5. Fulltext Stochastic electromagnetic field propagation- measurement and modelling
    Gradoni G, Russer J, Baharuddin MH, Haider M, Russer P, Smartt C, et al.
    Philos Trans A Math Phys Eng Sci, 2018 Oct 29;376(2134).
    PMID: 30373944 DOI: 10.1098/rsta.2017.0455
    This paper reviews recent progress in the measurement and modelling of stochastic electromagnetic fields, focusing on propagation approaches based on Wigner functions and the method of moments technique. The respective propagation methods are exemplified by application to measurements of electromagnetic emissions from a stirred, cavity-backed aperture. We discuss early elements of statistical electromagnetics in Heaviside's papers, driven mainly by an analogy of electromagnetic wave propagation with heat transfer. These ideas include concepts of momentum and directionality in the realm of propagation through confined media with irregular boundaries. We then review and extend concepts using Wigner functions to propagate the statistical properties of electromagnetic fields. We discuss in particular how to include polarization in this formalism leading to a Wigner tensor formulation and a relation to an averaged Poynting vector.This article is part of the theme issue 'Celebrating 125 years of Oliver Heaviside's 'Electromagnetic Theory''.
    Matched MeSH terms: Biometry
  6. Real-Time Medical Systems Based on Human Biometric Steganography: a Systematic Review
    Mohsin AH, Zaidan AA, Zaidan BB, Ariffin SAB, Albahri OS, Albahri AS, et al.
    J Med Syst, 2018 Oct 29;42(12):245.
    PMID: 30374820 DOI: 10.1007/s10916-018-1103-6
    In real-time medical systems, the role of biometric technology is significant in authentication systems because it is used in verifying the identity of people through their biometric features. The biometric technology provides crucial properties for biometric features that can support the process of personal identification. The storage of biometric template within a central database makes it vulnerable to attack which can also occur during data transmission. Therefore, an alternative mechanism of protection becomes important to develop. On this basis, this study focuses on providing a detailed analysis of the extant literature (2013-2018) to identify the taxonomy and research distribution. Furthermore, this study also seeks to ascertain the challenges and motivations associated with biometric steganography in real-time medical systems to provide recommendations that can enhance the efficient use of real-time medical systems in biometric steganography and its applications. A review of articles on human biometric steganography in real-time medical systems obtained from three main databases (IEEE Xplore, ScienceDirect and Web of Science) is conducted according to an appropriate review protocol. Then, 41 related articles are selected by using exclusion and inclusion criteria. Majority of the studies reviewed had been conducted in the field of data-hiding (particularly steganography) technologies. In this review, various steganographic methods that have been applied in different human biometrics are investigated. Thereafter, these methods are categorised according to taxonomy, and the results are presented on the basis of human steganography biometric real-time medical systems, testing and evaluation methods, significance of use and applications and techniques. Finally, recommendations on how the challenges associated with data hiding can be addressed are provided to enhance the efficiency of using biometric information processed in any authentication real-time medical system. These recommendations are expected to be immensely helpful to developers, company users and researchers.
    Matched MeSH terms: Biometry/methods*
  7. The prevalence of Helicobacter pylori in patients with oesophageal stenosis
    Ylmaz Ö, Temur A, Almal N, Dülger AC, Sasmaz MI
    Trop Biomed, 2018 Dec 01;35(4):1148-1153.
    PMID: 33601862
    Oesophageal strictures often occur following esophagectomy which is performed for cases of oesophageal cancer. These patients require repeated dilation procedures. The aim of this study is to investigate the effects of dietary regimens, which are changed because of stenosis, caused by Helicobacter pylori (H. pylori). In this retrospective study, 28 patients who had operation for oesophageal cancer and underwent dilation due to development of stricture were studied. 30 female and 30 male patients who were admitted to the Gastroenterology Clinic with complaints of dyspepsia and did not receive treatment for the eradication of H. pylori were randomly selected and included in this study as a control group. Patients' histopathological records on the hemogram, biochemistry, and endoscopic biopsy were analysed. There were 26 H. pylori (+) cases (92.8 %) in the stenosis group consisting of 28 patients, and 37 H. pylori (+) cases (61.6%) in the control group consisting of 60 patients. These results were found to be statistically significant (P=0.003). The albumin level in the stenosis group was reported to be statistically low (P=0.002). The incidence of H. pylori was found to be significantly higher in patients with stenosis. We ascribed this outcome due to changes in dietary regimens. Our findings showed that the dietary regimens of all patients who underwent esophagectomy should be regulated during the postoperative period considering H. pylori. The relationship between H. pylori and stenosis was significant, there is a need for further research with a larger sample size to enrich the findings.
    Matched MeSH terms: Biometry
  8. Observation of ϒ(2S)→γη_{b}(1S) Decay
    Fulsom BG, Pedlar TK, Adachi I, Aihara H, Al Said S, Asner DM, et al.
    Phys Rev Lett, 2018 Dec 07;121(23):232001.
    PMID: 30576207 DOI: 10.1103/PhysRevLett.121.232001
    We report the observation of ϒ(2S)→γη_{b}(1S) decay based on an analysis of the inclusive photon spectrum of 24.7  fb^{-1} of e^{+}e^{-} collisions at the ϒ(2S) center-of-mass energy collected with the Belle detector at the KEKB asymmetric-energy e^{+}e^{-} collider. We measure a branching fraction of B[ϒ(2S)→γη_{b}(1S)]=(6.1_{-0.7-0.6}^{+0.6+0.9})×10^{-4} and derive an η_{b}(1S) mass of 9394.8_{-3.1-2.7}^{+2.7+4.5}  MeV/c^{2}, where the uncertainties are statistical and systematic, respectively. The significance of our measurement is greater than 7 standard deviations, constituting the first observation of this decay mode.
    Matched MeSH terms: Biometry
  9. Fulltext A new strategy of handling general insurance modelling using applied linear method
    Wan Muhamad Amir W. Ahmad, Mohamad Arif Awang Nawi, Mustafa Mamat
    Malaysian Journal of Applied Sciences, 2018;1(1):45-54.
    MyJurnal
    This paper proposes the use of bootstrap, robust and fuzzy multiple linear regressions method in
    handling general insurance in order to get improved results. The main objective of bootstrapping is to
    estimate the distribution of an estimator or test statistic by resampling one's data or a model estimated
    from the data under conditions that hold in a wide variety of econometric applications. In addition,
    bootstrap also provides approximations to distributions of statistics, coverage probabilities of confidence
    intervals, and rejection probabilities of hypothesis tests that produce accurate results. In this paper, we
    emphasize the combining and modelling using bootstrapping, robust and fuzzy regression methodology.
    The results show that alternative methods produce better results than multiple linear regressions (MLR)
    model.
    Matched MeSH terms: Biometry
  10. Fulltext Range-box plotting relating to discrete distribution
    Mohd Bakri Adam, Babangida Ibrahim Babura, Kathiresan Gopal
    MATEMATIKA, 2018;34(2):187-204.
    MyJurnal
    The box plot has been used for a very long time since 70s in checking the existence
    of outliers and the asymmetrical shape of data. The existing box plot is constructed
    using five values of statistics calculated from either the discrete or continous data. Many
    improvement of box plots have deviated from the elegant and simplier approach of exploratory
    data analysis by incorporating many other statistic values resulting the turning
    back of the noble philosophy behind the creation of box plot. The modification using
    range value with the minimum and maximum values are being incorporated to suit the
    need of selected discrete distribution when outliers is not an important criteria anymore.
    The new modification of box plot is not based on the asymmetrical shape of distribution
    but more on the spreading and partitioning data into range measure. The new propose
    name for the box plot with only three values of statistics is called range-box plot.
    Matched MeSH terms: Biometry
  11. Fulltext Factorial analysis of growth parameters for mesophilic bacterium, Pseudomonas putida (ATCC 49128)
    Ahmad, Mani Malam, Abd. Aziz Mohd Azoddein, Jami, Mohammed Saed
    Biological and Natural Resources Engineering Journal, 2018;1(1):50-57.
    MyJurnal
    : Studies on bacterial growth pattern from the conventional approach are defective due
    to their failure to explain the interactions or simply the complementary effects of the factors
    influencing the bacterial growth. In this study, the individual and collaborative effects of
    Pseudomonas putida growth variables were evaluated using a 2-level fractional factorial design of
    experiment (FFDOE). The growth of the organism was found to respond remarkably to different
    concentrations of nutrient media (carbon source) and the other independent variables. Factorial
    models were developed from the experimental design to study the individual and interactive effects
    of the studied parameters on the response. The studied parameters and their levels were as follows:
    nutrient concentration (4-16 g/L), acclimatization time (24-72 hrs), agitation (140-200 rpm), and
    temperature (30-40oC). These parameters were statistically validated using analysis of variance
    (ANOVA) and the results revealed that the model terms were statistically significant with an Fvalue of 415.17 at P temperature > nutrient concentration versus temperature >
    agitation > nutrient concentration versus agitation. Based on the R
    2
    and the adjusted R
    2
    values of
    >95%, the estimated variables showed a high degree of relationship between the observed and the
    predicted values; thus, the predictive ability of the models was suggested. It could, therefore, be
    concluded that nutrient concentration, temperature, and agitation can greatly influence the growth
    of P. putida within a specific range.
    Matched MeSH terms: Biometry
  12. Fulltext UV-visible chemometrics approach for the determination of selected adulterants in claimed premixed coffee
    Muhammad Zul Fayyadh Azizo Rahman, Chong, Hui Wen, Lim, Vuanghao
    Malaysian Journal of Medicine and Health Sciences, 2018;14(102):1-6.
    MyJurnal
    Adulterated premixed coffees have turned into an issue in Malaysia lately and have caught the eye of the authorities due to death reports linked to these products. The major cause of this issue is reported that these premixed coffees have passed food inspection test and eventually released to the market for public consumption. These coffees were claimed to be spiked with several sexual enhancers like sildenafil, tadalafil, and vardenafill, which are common drugs used to treat erectile dysfunction. Methods: Chemometrics approach using UV-Vis spectroscopy was developed to detect the selected sexual enhancer drugs found in commercial coffees by employing SIMCA-P software for the multivariate statistical analysis. Seven brands of coffee samples were purchased from local stores, and 30 sachets each were tested, hence totalling to 210 samples. Each sample was named H, J, G, W, N, T, and K, respectively. Results: Three multivariate models were generated, namely principal component analysis (PCA), orthogonal partial least squares discriminant analysis (OPLS-DA), and partial least squares discriminant analysis (PLS-DA). OPLS-DA was selected as the best model for the overall results as it displayed minimal discriminate. Sildenafil, tadalafil, and vardenafil were detected in sample H, while vardenafil in brand J, and none in samples G, W, N, T, and K. Conclusion: OPLS-DA analysis showed discrimination for the sexual enhancer drugs in two brands of premixed coffee. The UV-Vis spectroscopy-based chemometrics method proved to be reliable and efficient in determining the selected drugs, as well as in saving time and cost.
    Matched MeSH terms: Biometry
  13. Fulltext Correlation of the anterior ocular segment biometry with HbA1c level in type 2 diabetes mellitus patients
    Suraida AR, Ibrahim M, Zunaina E
    PLoS One, 2018;13(1):e0191134.
    PMID: 29324896 DOI: 10.1371/journal.pone.0191134
    OBJECTIVES: To compare the anterior ocular segment biometry among Type 2 diabetes mellitus (DM) with no diabetic retinopathy (DR) and non-proliferative diabetic retinopathy (NPDR), and to evaluate the correlation of anterior ocular segment biometry with HbA1c level.

    METHODS: A cross-sectional study was conducted in Hospital Universiti Sains Malaysia, Kelantan from November 2013 till May 2016 among Type 2 DM patients (DM with no DR and DM with NPDR). The patients were evaluated for anterior ocular segment biometry [central corneal thickness (CCT), anterior chamber width (ACW), angle opening distance (AOD) and anterior chamber angle (ACA)] by using Anterior Segment Optical Coherence Tomography (AS-OCT). Three ml venous blood was taken for the measurement of HbA1c.

    RESULTS: A total of 150 patients were included in this study (DM with no DR: 50 patients, DM with NPDR: 50 patients, non DM: 50 patients as a control group). The mean CCT and ACW showed significant difference among the three groups (p < 0.001 and p = 0.015 respectively). Based on post hoc result, there were significant mean difference of CCT between non DM and DM with NPDR (mean difference 36.14 μm, p < 0.001) and also between non DM and DM with no DR (mean difference 31.48 μm, p = 0.003). The ACW was significantly narrower in DM with NPDR (11.39 mm SD 0.62) compared to DM with no DR (11.76 mm SD 0.53) (p = 0.012). There were no significant correlation between HbA1c and all the anterior ocular segment biometry.

    CONCLUSION: Diabetic patients have significantly thicker CCT regardless of retinopathy status whereas ACW was significantly narrower in DM with NPDR group compared to DM with no DR. There was no significant correlations between HbA1c and all anterior ocular segment biometry in diabetic patients regardless of DR status.

    Matched MeSH terms: Biometry/methods*
  14. First Measurements of Absolute Branching Fractions of the Ξ_{c}^{0} Baryon at Belle
    Li YB, Shen CP, Yuan CZ, Adachi I, Aihara H, Al Said S, et al.
    Phys Rev Lett, 2019 Mar 01;122(8):082001.
    PMID: 30932568 DOI: 10.1103/PhysRevLett.122.082001
    We present the first measurements of absolute branching fractions of Ξ_{c}^{0} decays into Ξ^{-}π^{+}, ΛK^{-}π^{+}, and pK^{-}K^{-}π^{+} final states. The measurements are made using a dataset comprising (772±11)×10^{6} BB[over ¯] pairs collected at the ϒ(4S) resonance with the Belle detector at the KEKB e^{+}e^{-} collider. We first measure the absolute branching fraction for B^{-}→Λ[over ¯]_{c}^{-}Ξ_{c}^{0} using a missing-mass technique; the result is B(B^{-}→Λ[over ¯]_{c}^{-}Ξ_{c}^{0})=(9.51±2.10±0.88)×10^{-4}. We subsequently measure the product branching fractions B(B^{-}→Λ[over ¯]_{c}^{-}Ξ_{c}^{0})B(Ξ_{c}^{0}→Ξ^{-}π^{+}), B(B^{-}→Λ[over ¯]_{c}^{-}Ξ_{c}^{0})B(Ξ_{c}^{0}→ΛK^{-}π^{+}), and B(B^{-}→Λ[over ¯]_{c}^{-}Ξ_{c}^{0})B(Ξ_{c}^{0}→pK^{-}K^{-}π^{+}) with improved precision. Dividing these product branching fractions by the result for B^{-}→Λ[over ¯]_{c}^{-}Ξ_{c}^{0} yields the following branching fractions: B(Ξ_{c}^{0}→Ξ^{-}π^{+})=(1.80±0.50±0.14)%, B(Ξ_{c}^{0}→ΛK^{-}π^{+})=(1.17±0.37±0.09)%, and B(Ξ_{c}^{0}→pK^{-}K^{-}π^{+})=(0.58±0.23±0.05)%. For the above branching fractions, the first uncertainties are statistical and the second are systematic. Our result for B(Ξ_{c}^{0}→Ξ^{-}π^{+}) can be combined with Ξ_{c}^{0} branching fractions measured relative to Ξ_{c}^{0}→Ξ^{-}π^{+} to yield other absolute Ξ_{c}^{0} branching fractions.
    Matched MeSH terms: Biometry
  15. Spatio-temporal simulation and prediction of land-use change using conventional and machine learning models: a review
    Aburas MM, Ahamad MSS, Omar NQ
    Environ Monit Assess, 2019 Mar 05;191(4):205.
    PMID: 30834982 DOI: 10.1007/s10661-019-7330-6
    Spatio-temporal land-use change modeling, simulation, and prediction have become one of the critical issues in the last three decades due to uncertainty, structure, flexibility, accuracy, the ability for improvement, and the capability for integration of available models. Therefore, many types of models such as dynamic, statistical, and machine learning (ML) models have been used in the geographic information system (GIS) environment to fulfill the high-performance requirements of land-use modeling. This paper provides a literature review on models for modeling, simulating, and predicting land-use change to determine the best approach that can realistically simulate land-use changes. Therefore, the general characteristics of conventional and ML models for land-use change are described, and the different techniques used in the design of these models are classified. The strengths and weaknesses of the various dynamic, statistical, and ML models are determined according to the analysis and discussion of the characteristics of these models. The results of the review confirm that ML models are the most powerful models for simulating land-use change because they can include all driving forces of land-use change in the simulation process and simulate linear and non-linear phenomena, which dynamic models and statistical models are unable to do. However, ML models also have limitations. For instance, some ML models are complex, the simulation rules cannot be changed, and it is difficult to understand how ML models work in a system. However, this can be solved via the use of programming languages such as Python, which in turn improve the simulation capabilities of the ML models.
    Matched MeSH terms: Biometry
  16. Dataset on the influence of software development agility on software firms' performance in Bangladesh
    Sadia F, Mahmud I, Dhar E, Jahan N, Hossain SS, Zaidi Satter AKM
    Data Brief, 2019 Apr;23:103741.
    PMID: 31372407 DOI: 10.1016/j.dib.2019.103741
    The article identifies the relationship among different agile software development approaches such as response extensiveness, response efficiency, team autonomy, team diversity, and software functionality that software teams face difficult challenges in associating and achieving the right balance between the two agility dimensions. This research strategy, in terms of quantity, is descriptive and correlational. Statistical analysis of the data was carried out, using SmartPLS 3.0. Statistical population, consist of employees of software industries in Bangladesh, who were engaged in 2017 and their total number is about 100 people. The data show that the response extensiveness, response efficiency, team autonomy, team diversity, and software functionality have impact on software development agility and software development performance.
    Matched MeSH terms: Biometry
  17. Fulltext Multi-Biometric System Based on Cutting-Edge Equipment for Experimental Contactless Verification
    Kolda L, Krejcar O, Selamat A, Kuca K, Fadeyi O
    Sensors (Basel), 2019 Aug 26;19(17).
    PMID: 31455045 DOI: 10.3390/s19173709
    Biometric verification methods have gained significant popularity in recent times, which has brought about their extensive usage. In light of theoretical evidence surrounding the development of biometric verification, we proposed an experimental multi-biometric system for laboratory testing. First, the proposed system was designed such that it was able to identify and verify a user through the hand contour, and blood flow (blood stream) at the upper part of the hand. Next, we detailed the hard and software solutions for the system. A total of 40 subjects agreed to be a part of data generation team, which produced 280 hand images. The core of this paper lies in evaluating individual metrics, which are functions of frequency comparison of the double type faults with the EER (Equal Error Rate) values. The lowest value was measured for the case of the modified Hausdorff distance metric - Maximally Helicity Violating (MHV). Furthermore, for the verified biometric characteristics (Hamming distance and MHV), appropriate and suitable metrics have been proposed and experimented to optimize system precision. Thus, the EER value for the designed multi-biometric system in the context of this work was found to be 5%, which proves that metrics consolidation increases the precision of the multi-biometric system. Algorithms used for the proposed multi-biometric device shows that the individual metrics exhibit significant accuracy but perform better on consolidation, with a few shortcomings.
    Matched MeSH terms: Biometry
  18. Novel SNPs in the SPAG11 gene and association with testicular biometric variables in Boer goats and application of the levelled-container technique
    Harighi MF, Wahid H, Thomson PC, Rafii MY, Jesse FFA
    Anim. Reprod. Sci., 2019 Sep;208:106113.
    PMID: 31405472 DOI: 10.1016/j.anireprosci.2019.106113
    Testicular volume (TV) is one of the most important traits used in evaluation of the reproductive capacity of male animals. The levelled-container used in the present study was found to be reliable instrument to measure TV, based on a water displacement method. Sperm-associated antigen 11 (SPAG11) is an important gene that affects male reproductive performance. An objective of the present study, therefore, was to determine if single nucleotide polymorphisms (SNPs) in a fragment of the SPAG11 gene could be used to determine associations with values of testicular biometric variables in Boer goats. Primers were designed to amplify the full length of the first two exons of SPAG11. The targeted fragment was generated using a molecular cloning technique. As the result, four SNPs, [g.1256A > G(ss19199134542), g.1270C > T(ss19199134541), g.1325A > G(ss19199134540) and g.1327 G > A (ss19199134543)], were detected using a single-base extension (SBE) method. Two of these SNPs were synonymous (ss19199134540 and ss19199134542). The other two SNPs were nonsynonymous, thus, there were changes in amino acid in the resulting protein: threonine to isoleucine (for ss19199134541) and arginine to glutamine (for ss19199134543). The SNP ss19199134543 was the only locus detected that was associated with TV (P = 0.002). None of the testes dimensions nor TW were associated with detected SPAG11 gene SNPs. Most likely, the ss19199134543 locus affects tissue structures adjacent to the testes, causing the change in TV. In conclusion, among the studied testicular biometric variables, TV had the greatest potential for preselecting of bucks with desirable semen quality. The use of the levelled-container as a TV measurement approach was an accurate and reliable method.
    Matched MeSH terms: Biometry/instrumentation; Biometry/methods*
  19. Fulltext Internal, external, networking factors and challenges of small medium enterprise (SMEs) internationalization
    Nur Zania Azurin Abdullah Sani, Ahmad Shazeer Mohamed Thaheer, Zahariah Mohd Zain
    Journal of Academia Universiti Teknologi MARA Negeri Sembilan, 2019;7(101):133-141.
    MyJurnal
    Internationalization procedure of small to medium-sized enterprises (SMEs) is part of the increasing economy. The study aims to identify relationships between the factors influencing the SMEs to internationalize and identifying the most impactful factor that affects the internationalization of SMEs. The factors affecting internationalization of SMEs identified were external, internal, networking as well as barriers and challenges. The study focusses on SMEs in the service sector in Klang Valley, Malaysia. The methods used to conduct the survey is by distributing the questionnaire through email. There are 100 selected SMEs in the service sector which are listed in SME Corp Malaysia website and MATRADE website. Regardless of whether the SME’s are practising international business or not, they will still be one of the potential respondents. The data were examined and obtained using the statistical software SPSS. The analysis used is reliability analysis, correlation analysis and regression analysis to meet the research objectives. The expected outcome from this research is to analyze the factors that will impact the internationalization of SMEs. The results of the analysis show that all the variables have a low positive correlation. The most influential factors that effects SMEs decision to go international are barriers and challenges.
    Matched MeSH terms: Biometry
  20. Fulltext Sleep belief factors among Diploma students in UiTM Sabah
    Nowyannie Willie D. Tamsin, Norah Tuah, Mazalan Sarahintu, Herniza Roxanne Marcus
    Borneo Akademika, 2019;3(1):20-29.
    MyJurnal
    University students are known to have different sleeping schedules. Students’ sleep difficulties will affect their health and their performances in studies. Sleep hygiene is a collection of healthy sleep habits that can improve one’s ability to fall asleep and stay asleep. It is considered to be imperative to treat sleep disturbance especially among university students. The aim of this study is to examine the sleep beliefs among the students of UiTM Sabah based on gender and academic performance. This study was conducted on Diploma students between March and July 2018. The respondents were randomly selected from Diploma students of all faculties in UiTM Sabah: Accounting, Business Management, Public Administration, Science, Planting Industry Management, Hotel Management, and Tourism Management. This paper is based on the Sleep Belief Scale questionnaire to assess the sleep hygiene awareness. Questionnaires were distributed using online survey. Findings of this study were analyzed using SPSS statistical software. The result of findings showed that the Sleep Incompatible Behaviours (drinking coffee, taking sleep medication, smoking before sleep) is the highest contributor of the students’ sleep hygiene and therefore it affects the sleep quality. While the Sleep Wake Cycle Behaviours (going to bed & waking up always at the same hour, going to bed two hours earlier than the habitual hour) and Thoughts and Attitude to Sleep (over thinking before sleep, trying to fall asleep without having a sleep sensation)also contributed to the sleep hygiene of the students but not as high as the Sleep Incompatible Behaviours. Based on the results of the findings, the counseling department of UiTM Sabah may organise an education program to create awareness among students about the intervention and prevention strategies as well as the incorrect beliefs about sleep.
    Matched MeSH terms: Biometry
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links