MyMedR

Displaying publications 81 - 100 of 124 in total

Abstract:

Sort:

Fulltext The microbial composition of dried fish prepared according to Greenlandic Inuit traditions and industrial counterparts

Hauptmann AL, Paulová P, Castro-Mejía JL, Hansen LH, Sicheritz-Pontén T, Mulvad G, et al.

Food Microbiol, 2020 Feb;85:103305.
PMID: 31500717 DOI: 10.1016/j.fm.2019.103305

The practices of preparing traditional foods in the Arctic are rapidly disappearing. Traditional foods of the Arctic represent a rarity among food studies in that they are meat-sourced and prepared in non-industrial settings. These foods, generally consumed without any heating step prior to consumption, harbor an insofar undescribed microbiome. The food-associated microbiomes have implications not only with respect to disease risk, but might also positively influence host health by transferring a yet unknown diversity of live microbes to the human gastrointestinal tract. Here we report the first study of the microbial composition of traditionally dried fish prepared according to Greenlandic traditions and their industrial counterparts. We show that dried capelin prepared according to traditional methods have microbiomes clearly different from industrially prepared capelin, which also have more homogenous microbiomes than traditionally prepared capelin. Interestingly, the locally preferred type of traditionally dried capelin, described to be tastier than other traditionally dried capelin, contains bacteria that potentially confer distinct taste. Finally, we show that dried cod have comparably more homogenous microbiomes when compared to capelin and that in general, the environment of drying is a major determinant of the microbial composition of these indigenous food products.

Matched MeSH terms: Desiccation*
Subterranean termite open-air foraging and tolerance to desiccation: Comparative water relation of two sympatric Macrotermes spp. (Blattodea: Termitidae)

Hu J, Neoh KB, Appel AG, Lee CY

Comp Biochem Physiol A Mol Integr Physiol, 2012 Feb;161(2):201-7.
PMID: 22085890 DOI: 10.1016/j.cbpa.2011.10.028

The foraging patterns of termites are strongly related to physiological limits in overcoming desiccation stress. In this study, we examined moisture preferences and physiological characteristics of Macrotermes carbonarius (Hagen) and M. gilvus (Hagen) as both exhibit conspicuous patterns of foraging activity. Despite both species showing no significant differences in calculated cuticular permeability, and percentage of total body water, they differed greatly in rate of water loss and surface area to volume ratio. For example, M. carbonarius which had a lower surface area to volume ratio (29.26-53.66) showed lower rate of water loss and percentage of total body water loss. This also resulted in higher LT(50) when exposed to extreme conditions (≈2% RH). However, contrasting observations were made in M. gilvus that has smaller size with higher surface area to volume ratio of 40.28-69.75. It is likely that the standard equation for calculating insect surface areas is inadequate for these termite species. The trend was further supported by the result of a moisture preference bioassay that indicated M. carbonarius had a broader range of moisture preference (between 5% and 20%) than M. gilvus which had a relatively narrow moisture preference (only 20%). These results explain why M. carbonarius can tolerate desiccation stress for a longer period foraging above-ground in the open air; while M. gilvus only forages below ground or concealed within foraging mud tubes.

Matched MeSH terms: Desiccation*
Fulltext Application of foam-mat drying with egg white for carrageenan: drying rate and product quality aspects

Djaeni M, Prasetyaningrum A, Sasongko SB, Widayat W, Hii CL

J Food Sci Technol, 2015 Feb;52(2):1170-5.
PMID: 25694735 DOI: 10.1007/s13197-013-1081-0

Drying is a significant step in the production of carrageenan. However, current drying process still deals with too long drying time and carrageenan quality degradation. The foam mat drying is an option to speed up drying process as well as retaining carrageenan quality. In this case, the carrageenan was mixed with egg white (albumin) as foaming agent and methyl cellulose for foam stabilizer. The foam will break the carrageenan gels and creates the porous structure resulting higher surface area for water transfer. This research studied the effect of egg white and methyl cellulose on carrageenan drying at various air temperature, and thickness. As a response, the water content versus time was observed and the drying rate was estimated. Meanwhile, the carrageenan texture was verified by X-RD (X-Ray Diffraction) and TEM (Transmission Electron Microscopy). Results showed that the presence of egg white stablized by methyl cellulose can speed up drying rate as well as retaining the crystalline structure of carrageenan. The higher albumin content, the faster drying rate. However, the addition of albumin and methyl cellulose restricted not more than 30 % in the mixture for keeping carrageenan quality and purity. By adding egg white 20 % and methyl cellulose 10 %, the water diffusion and drying rate can be two fold compared with carrageenan drying without foam. The improvement can be higher at the higher temperature and thinner carrageenan sheets.

Matched MeSH terms: Desiccation
Fulltext Effect of different types of plastic packaging films on the moisture and aflatoxin contents of pistachio nuts during storage

Shakerardekani A, Karim R

J Food Sci Technol, 2013 Apr;50(2):409-11.
PMID: 24425936 DOI: 10.1007/s13197-012-0624-0

Pistachio nut (Pistacia vera L.) is one of the popular tree nuts in the world. Proper selection of packaging materials is necessary to prevent absorption of moisture and aflatoxin formation which will influence the overall product quality and safety. This research is undertaken to study the effect of different type of flexible packaging films on the moisture and aflatoxin contents of whole pistachio nuts during storage at ambient temperature (22-28 °C) and relative humidity of 85-100%. Five types of plastic films tested were low density polyethylene (LDPE) which serves as the control, food-grade polyvinyl chloride (PVC), nylon (LDPE/PA), polyamide/polypropylene (PA/PP) and polyethylene terephthalate (PET). The moisture content and aflatoxin content of pistachio nuts were measured using oven drying method and HPLC, respectively. Sample were analysed at 0, 2, 4, 6, 8 and 10 months during the storage period. Results showed that there was an increase in moisture content with the increase in storage time of pistachio nuts. The increase in moisture content was associated with the aflatoxin level of pistachio nuts during storage time. All the packaging materials except LDPE delayed the moisture absorption and aflatoxin formation of the product. The most suitable packaging materials for maintaining the quality and safety of pistachio nuts is PET films followed by nylon, PA/PP and PVC. The shelf-life of pistachio can be extended from 2 months (Control) to 5 months when PET is used as the packaging material.

Matched MeSH terms: Desiccation
Optimal hydration status for cryopreservation of intermediate oily seeds: Citrus as a case study

Hor YL, Kim YJ, Ugap A, Chabrillange N, Sinniah UR, Engelmann F, et al.

Ann Bot, 2005 Jun;95(7):1153-61.
PMID: 15781438

The purpose of this study was to investigate the basis of the optimal hydration status for cryopreservation of intermediate oily seeds using Citrus as a model.

Matched MeSH terms: Desiccation
Fulltext The physicochemical properties of microwave-assisted encapsulated anthocyanins from Ipomoea batatas as affected by different wall materials

Mohd Nawi N, Muhamad II, Mohd Marsin A

Food Sci Nutr, 2015 Mar;3(2):91-9.
PMID: 25838887 DOI: 10.1002/fsn3.132

This study focuses on the impact of different wall materials on the physicochemical properties of microwave-assisted encapsulated anthocyanins from Ipomoea batatas. Using the powder characterization technique, purple sweet potato anthocyanin (PSPAs) powders were analysed for moisture content, water activity, dissolution time, hygroscopicity, color and morphology. PSPAs were produced using different wall materials: maltodextrin (MD), gum arabic (GA) and a combination of gum arabic and maltodextrin (GA + MD) at a 1:1 ratio. Each of the wall materials was homogenized to the core material at a core/wall material ratio of 5 and were microencapsulated by microwave-assisted drying at 1100 W. Results indicated that encapsulated powder with the GA and MD combination presented better quality of powder with the lowest value of moisture content and water activity. With respect to morphology, the microcapsule encapsulated with GA + MD showed several dents in coating surrounding its core material, whereas other encapsulated powders showed small or slight dents entrapped onto the bioactive compound. Colorimetric analysis showed changes in values of L, a*, b*, hue and chroma in the reconstituted powder compared to the initial powder.

Matched MeSH terms: Desiccation
Fulltext Effects of different drying methods on essential oil yield and component profile of Polygonum minus root extract

Azhari, N. A. M., Markom, M., Ismail, I., Anuar, N.

International Food Research Journal, 2020;27(1):96-102.
MyJurnal

Polygonum minus is a plant rich with bioactive components that contribute to food, pharmaceutical, and perfume industries. However, high moisture content in fresh plants will allow
microbial activity that leads to the degradation of plant quality. This can be prevented by
drying the fresh plants to preserve the characteristics of their bioactive components. The
present work was conducted to determine the effect of different drying methods such as
air-drying, oven-drying (40 and 60°C), and freeze-drying on essential oil (EO) yield and
chemical compounds of P. minus roots. For comparison purposes, all samples were extracted
by maceration with n-hexane at room temperature. Then, the samples were analysed and
identified by using gas chromatography-mass spectrometry (GC-MS). The highest EO yield
extract was obtained from freeze-drying (4.15 ± 0.5), followed by air-drying (3.79 ± 0.19). EO
yield from oven-drying at 40 and 60°C was 3.4 ± 0.14 and 0.86 ± 0.04, respectively. Results
showed that by increasing the drying temperature, the EO yield would decrease and cause a
loss of major chemical compounds in the P. minus root. Air-drying was found to be the best
method in preserving the presence of important chemical compound in P. minus roots such as
β-caryophyllene (1.43%), pentadecane (4.34%), hexadecanoic acid (3.91%) and oleic acid
(3.97%).

Matched MeSH terms: Desiccation
Fulltext Ascorbate peroxidase activity of Aranda Broga Blue orchid protocorm-like bodies (plbs) in response to PVS2 cryopreservation method

Khor, Soo Ping, Rahmad Zakaria, Subramaniam, Sreeramanan

Trop Life Sci Res, 2016;27(11):139-143.
MyJurnal

Throughout the cryopreservation process, plants were exposed to a series of
abiotic stresses such as desiccation and osmotic pressure due to highly concentrated
vitrification solution. Abiotic stress stimulates the production of reactive oxygen species
(ROS) which include hydrogen peroxide, superoxide radicals, and singlet oxygen. Higher
production of ROS may lead to oxidative stress which contributes to the major injuries in
cryopreserved explants. Antioxidant enzymes in plant such as ascorbate peroxidase
(APX) can protect plants from cell damage by scavenging the free radicals. This study was
determined based on APX enzyme activity of Aranda Broga Blue orchid’s protocorm-like
bodies (PLBs) in response to PVS2 (Plant Vitrification Solution 2) cryopreservation
treatments at different stages. PLBs that were precultured at 0.25 M sucrose for 3 days
were subjected to vitrification cryopreservation method. Results obtained showed that the
highest APX activity was achieved at PVS2 cryoprotectant treatment prior liquid nitrogen
(LN) storage. This phenomenon indicating that accumulation of osmotic and dehydrating
stress throughout the cryopreservation treatment resulted in oxidative burst which in turn
leads to higher APX activity in order to control the excess production of ROS. To
conclude, PVS2 treatment was revealed as the most detrimental step throughout
cryopreservation treatment. Thus, this research also suggested that exogenous
antioxidant such as ascorbic acid can be added throughout cryopreservation procedure
especially at PVS2 treatment in the future experiments to aid in regrowth of cryopreserved
explants by reducing oxidative stress.

Matched MeSH terms: Desiccation
Fulltext Effects of freeze drying on retention of essential oils, changes in glandular trichomes of lemon balm leaves

Antal, T., Sikolya, L., Chong, C.H., Law, C.L.

International Food Research Journal, 2014;21(1):387-394.
MyJurnal

The effect of chamber pressure of a freeze dryer on essential oil contents, drying kinetics, drying characteristics lemon balm leaves and morphology of lemon balm glandular trichomes (oil reservoirs) were investigated. It was found that overall freeze drying (FD) carried out at high (FD-HP) and low pressure (FD-LP) settings consist of sublimation rate, first falling rate and second falling rate periods. Drying rate of FD-LP dried Lemon Balm leaves are higher than FD-HP dried samples, where the drying rates ranged from 0.063 to 0.449 g H2O/ g DM. s and 0.0365 to 0.395 g H2O/ g DM. s, respectively. 3rd order Polynomial model was found to be the best fit model for both drying kinetics. In terms of product quality, eight (8) major constituents of lemon balm leaves essential oil were quantified. Further to this, electro-microscope was used to observe the peltate glandular hairs structure. Product quality analysis showed that FD-HP retained higher amount of essential oil, shape of glandular hairs, but no positive effect on the freeze drying duration.

Matched MeSH terms: Desiccation
Fulltext Effects of different drying methods on the rheological, functional and structural properties of chicken skin gelatin compared to bovine gelatin

Rasli, H.I., Sarbon, N.M.

International Food Research Journal, 2015;22(2):584-592.
MyJurnal

This study investigates effects from different drying methods (vacuum oven dried vs. freeze dried) on the rheological, functional and structural properties of chicken skin gelatin compared to bovine gelatin. Vacuum oven dried chicken skin samples showed a higher gelatin yield (12.86%) than freeze-dried samples (9.25%). The latter showed a higher melting temperature (32.64oC) and superior foaming capacity (176%) as well as foaming stability (166.67%). Vacuum oven dried samples demonstrated greater fat binding capacity (5.5 ml/g) and emulsion stability (55.79%). There were no significant differences (p >0.05) in emulsion and water holding capacity for three gelatins. Bovine gelatin did hold the lowest of all functional properties studied. A Fourier Transform Infrared (FTIR) spectrum analysis of chicken skin gelatin under both drying methods presented structures similar to those of bovine gelatin. Collectively, this findings indicated no significant differences (p >0.05) in rheological, functional and structural properties for chicken skin gelatins prepared by either drying method. Hence, to save costs and maintain gelatin quality, vacuum oven drying offers potential as an alternative means of production.

Matched MeSH terms: Desiccation
Identification of the compositional changes in Orthosiphon stamineus leaves triggered by different drying techniques using 1 H NMR metabolomics

Pariyani R, Ismail IS, Ahmad Azam A, Abas F, Shaari K

J Sci Food Agric, 2017 Sep;97(12):4169-4179.
PMID: 28233369 DOI: 10.1002/jsfa.8288

BACKGROUND: Java tea is a well-known herbal infusion prepared from the leaves of Orthosiphon stamineus (OS). The biological properties of tea are in direct correlation with the primary and secondary metabolite composition, which in turn largely depends on the choice of drying method. Herein, the impact of three commonly used drying methods, i.e. shade, microwave and freeze drying, on the metabolite composition and antioxidant activity of OS leaves was investigated using proton nuclear magnetic resonance (1 H NMR) spectroscopy combined with multivariate classification and regression analysis tools.
RESULTS: A total of 31 constituents comprising primary and secondary metabolites belonging to the chemical classes of fatty acids, amino acids, sugars, terpenoids and phenolic compounds were identified. Shade-dried leaves were identified to possess the highest concentrations of bioactive secondary metabolites such as chlorogenic acid, caffeic acid, luteolin, orthosiphol and apigenin, followed by microwave-dried samples. Freeze-dried leaves had higher concentrations of choline, amino acids leucine, alanine and glutamine and sugars such as fructose and α-glucose, but contained the lowest levels of secondary metabolites.
CONCLUSION: Metabolite profiling coupled with multivariate analysis identified shade drying as the best method to prepare OS leaves as Java tea or to include in traditional medicine preparation. © 2017 Society of Chemical Industry.

Matched MeSH terms: Desiccation
Fulltext Production of spray-dried Sarawak pineapple (Ananas comosus) powder from enzyme liquefied puree

Pui, L. P., Ng. J. M. L., Wong, C. W.

International Food Research Journal, 2015;22(4):1631-1636.
MyJurnal

Spray drying is used widely for converting liquid food products into powder form as the dried powder is known to have a longer shelf life at ambient temperature, convenience to use and low transportation expenditure. In this study, the Sarawak pineapple puree was spray-dried and the characterization of the resulting powder was performed. The process of enzyme liquefaction was optimized with Pectinex® Ultra SP-L and Celluclast® 1.5 L (single and combined treatment) at different concentrations (0–2.5 %) and incubation time (0-2.5 hours). The combined treatment with both enzymes (1.5% v/w Pectinex® Ultra SP-L + 0.5% v/w Celluclast® 1.5 L, 1.5 hour) was found to be the best parameter, which produced purees with the lowest viscosity of 67.98 ± 4.27 cp. Optimization of spray drying process was carried out using different inlet temperatures (150-180°C) and maltodextrin concentrations (15-30 % w/w). Results indicated that the spraydried powder produced at 160°C with 15% w/w of maltodextrin has the highest yield (31.63 %). The spray-dried powder was further characterized for the moisture content (6.00 ± 0.63%), water activity (0.36 ± 0.01 Aw), hygroscopicity (17.35 ± 0.64%), bulk density (0.46 ± 0.04 g/ cm3 ) and solubility (87.33 ± 2.08 seconds). The fruit powder of this study can be incorporated into different fruit added –value products, such as fruit juice, yogurt, jelly and other beverages.

Matched MeSH terms: Desiccation
Fulltext De novo transcriptome resources of the lichens, Dirinaria sp. UKM-J1 and UKM-K1 collected from Jerantut and Klang, Malaysia

Bharudin I, Abdul Rahim SN, Abu Bakar MF, Ibrahim SN, Kamaruddin S, Latif MT, et al.

Data Brief, 2018 Aug;19:2416-2419.
PMID: 30229114 DOI: 10.1016/j.dib.2018.07.020

Lichen is a symbiotic organism that exists as a single composite body consisting of a mycobiont (fungus) and a photobiont (algae or a cyanobacterium). Many lichen species are considered as extremophiles due to their tolerance to radiation, desiccation, temperature and pollution. However, not all lichen species are tolerant to harsh environmental conditions as several species are sensitive for example to nitrogen, sulphur, acidity, heavy metals, halogens (e.g. fluoride) and ozone. Thus, to better understand why some lichens can withstand exposure to pollutants as opposed to those that are susceptible, we focused on the lichen species of Dirinaria known for their wide distribution in the tropics, subtropics and pantropical, and moderate tolerance to air pollution. Their moderate tolerance to air pollution affords them to thrive in good air quality environments as well as polluted air environments. Lichen samples of Dirinaria sp., UKM-J1 and UKM-K1, were respectively collected from two areas with different levels of air quality based on Air Pollutant Index or API (with index pollutant criteria of PM10, carbon monoxide, ozone, nitrogen dioxide and sulfur dioxide) in the outskirt of Jerantut (UKM-J1), a rural area in the middle of Peninsular Malaysia and the township of Klang (UKM-K1), in a busy area of the Klang Valley, Malaysia. API was monitored throughout 2012-2013 whereby the sample collection site in Klang showed markedly higher concentrations of pollutants in all the index pollutant criteria as compared to that of Jerantut. We performed transcriptome sequencing using Illumina RNA-seq technology and de novo assembly of the transcripts from the lichen samples. Raw reads from both libraries were deposited in the NCBI database with the accession number SRP138994.

Matched MeSH terms: Desiccation
Development of an efficient flat plate solar air heater for drying and water heating purposes

Hanif M, Khattak M, Amin M, Ramzan M, Zakir S, Ullah S, et al.

Sains Malaysiana, 2016;45:489-497.

A 1.7 m2 flat plate solar air heater was designed and developed in the Department of Agricultural Mechanization, The University of Agriculture Peshawar, Pakistan in collaboration with the Department of Environmental Sciences, University of Peshawar, Pakistan. It was operated under an average solar irradiance of 0.9 kJ.m-2.h-1 in the month of September, 2013. It worked under an efficiency of 7.5 to 21%. The heat collected by the air heater was given to air flowing as a medium inside it. This hot air was given to a drying section and water heating tank for drying and water heating purposes. The drying section provided a temperature in the range of 40-50oC and humidity of 10-30% from 10:00 am to 3:00 pm. The water heating tank provides hot water with a temperature of 35- 45oC from 10:00 am to 5:00 pm. Furthermore, the drying section was used to dry apples, onions and persimmons. All the products showed a consistent moisture loss from them with an optimum drying rate. The two term exponential model showed that all the three products dried have a good correlation with drying time with R2 values higher than 0.90. It was concluded that flat plate solar air heaters is the best technology for water heating and drying purposes and is a good alternative of conventional energy sources.

Matched MeSH terms: Desiccation
Fulltext Physico-chemical properties of the oils and fat from Crotalaria Cleomifolia seeds

Noor Wini Mazlan, Ikram M. Said

Sains Malaysiana, 2011;40(9):1037-1041.

The seeds of C. cleomifolia (locally known as kacang hantu) collected along Simpang Pulai - Berinchang Road, Cameron Highlands, was defatted with hexane and the resulting oil was analysed for their physico-chemical properties. The percentage yield of the oil was calculated as 5.3%. The acid value (1.2%), iodine value (85), peroxide value (0.6), saponification value (192.0) and unsaponifiable matter (2.3%) were determined to assess the quality of the oil. The physico-chemical characterisation showed that C. cleomifolia seeds oil is unsaturated semi-drying oil, with high saponifi cation and acidic values. The fatty acid composition of C. cleomifolia seed oil was determined by Gas Chromatography and Gas Chromatography-Mass Spectrometry (ToF). The seed oil of C. cleomifolia contained linoleic acid (57.59%) and palmitic acid (5.07%), the most abundant unsaturated and saturated fatty acids, respectively. The polyunsaturated triacylglycerol (TAG) in C. cleomifolia seed oil determined by reverse phase High performance Liquid Chromatography; contained as PLL (18.04%) followed by POL + SLL (11.92%), OOL (7.04%) and PLLn (6.31%). The melting and cooling point of the oil were 16.22°C and -33.54°C, respectively

Matched MeSH terms: Desiccation
Effect of different drying techniques on the nutritional values of oyster mushroom (pleurotus sajor-caju)

Aishah M, Wan Rosli W

Sains Malaysiana, 2013;42:937-941.

Mushrooms are basically fungi, which have fleshy and spore-bearing fruiting body. This family of fungi literally has thousands of varieties of mushroom throughout the world. Oyster mushrooms are uniquely distinctive and they do look like oysters. Drying these mushroom confer a stabilizing property to it and then can be stored for a longer period. The nutritional values of the dried oyster mushroom with different drying techniques were thus determined. There were three different drying techniques used. These include low heat air blow (LHAB, AnjaadTM), sun drying (SD) and gas laboratory oven (LO) drying. All three samples were analyzed for beta-glucan content, water activity, colour, proximate analysis and dietary fibre concentration. The result showrd that LHAB method confers the lowest water activity compared with the other two drying methods. It also has the lowest colour measurement for brightness. Mushroom samples dried by LHAB techniques contain the highest concentration of both fat and carbohydrate compared with the other two methods. Besides, SD method confers the highest beta-glucan content. On the other hand, dietary fibres observed in LO dried samples contain the highest fibre content among the three drying treatments. In conclusion, LHAB method is recommended in reducing water activity and increasing proximate contents while both SD and LO are good in preserving beta-glucan and dietary fibre contents, respectively.

Matched MeSH terms: Desiccation
Fulltext Cryopreservation of oil palm (Elaeis guineensis Jacq.) polyembryoids via encapsulation-desiccation

Palanyandy SR, Gantait S, Subramaniam S, Sinniah UR

3 Biotech, 2020 Jan;10(1):9.
PMID: 31850156 DOI: 10.1007/s13205-019-1997-9

The current report assesses the efficiency of encapsulation-desiccation protocol to cryopreserve oil palm (Elaeis guineensis Jacq.) polyembryoids. Specifically identified polyembryoids, comprising of haustorium and torpedo-shaped structures, were encapsulated [comprising 3% (w/v) sodium alginate and 100 mM CaCl2]. Calcium alginate-encapsulated and sucrose-precultured polyembryoids were subjected to different spans of desiccation in a laminar air-flow cabinet, followed by freezing in liquid nitrogen. The effect of sucrose preculture (with gradual exposure to 0.3, 0.5, 0.75 and 1 M for 7 days) and dehydration periods (0-10 h) under sterile air-flow on post-freezing survival and regrowth of encapsulated polyembryoids were studied. Cryopreserved and thawed polyembryoids (initially precultured in sucrose, followed by 9 h air-desiccated to 23.3% moisture content) displayed the highest survival percentage (73.3%) and regeneration (of shoot, root and secondary somatic embryo) on Murashige and Skoog regrowth medium containing sucrose (0.3-1 M) and 0.2 mg/l 2,4-dichlorophenoxy acetic acid. In addition, ultrastructural study using scanning electron microscopy exhibited successful revival of cryopreserved polyembryoids, owing to retention of cellular membrane stability through optimized and protected (encapsulated) desiccation. The present study thus substantiates the potential of this encapsulation-desiccation procedure in cryopreservation of oil palm polyembryoids for long-term conservation programs.

Matched MeSH terms: Desiccation
Fulltext Combination of Plant Growth Regulators, Maltose, and Partial Desiccation Treatment Enhance Somatic Embryogenesis in Selected Malaysian Rice Cultivar

Ming NGJ, Binte Mostafiz S, Johon NS, Abdullah Zulkifli NS, Wagiran A

Plants (Basel), 2019 May 30;8(6).
PMID: 31151227 DOI: 10.3390/plants8060144

The development of efficient tissue culture protocol for somatic embryo would facilitate the genetic modification breeding program. The callus induction and regeneration were studied by using different parameters i.e., auxins, cytokinins, and desiccation treatment. Scanning electron microscopy and histological analysis were performed to identify the embryogenic callus for regeneration. The callus percentage results showed that MS (Murashige and Skoog) basal medium supplemented with 3 mg/L 2, 4-D and 30g/L maltose were the optimal callus induction medium for MR220 (80%) and MR220-CL2 (95%). The morphology of the embryogenic callus was confirmed by the SEM (Scanning Electron Microscopy) (presence of extracellular matrix surface network) and later by histological analysis. Finally, MS media supplemented with 0.5 mg/L NAA (Naphthalene Acetic Acid), 2 mg/L kin, and 1 mg/L BAP were selected as the optimum regeneration media treatment while callus desiccated for 48 h was proved to produce more plantlets in MR220 (60%) and MR220-CL2 (73.33%) compared to control treatment (without desiccation). The protocol presented here showed the necessity for the inclusion of partial desiccation as an important step in the tissue culture protocol of Malaysian indica rice genotypes in order to enhance their regeneration potential.

Matched MeSH terms: Desiccation
Induced Disturbances Cause Monomorium pharaonis (Hymenoptera: Formicidae) Nest Relocation

Tay JW, Lee CY

J Econ Entomol, 2015 Jun;108(3):1237-42.
PMID: 26470251 DOI: 10.1093/jee/tov079

Budding and relocation of nests are important characteristics of the Pharaoh ant, Monomorium pharaonis (L.), an important pest of artificial structures. Pharaoh ant colony movements induced by several types of disturbances were evaluated in the laboratory. The percentages of workers and brood in the source and new nest sites were determined at Days 0, 1, 3, and 5 following physical disturbance (temporal removal of nestmates), chemical disturbance (application of pyrethroid insecticide), invasion by heterospecific ants, food depletion, and moisture depletion in the laboratory. All disturbances were performed in the source nest, which was connected to an empty new nest site. Almost all workers moved and carried the entire brood to the new nest site when subjected to physical disturbance, chemical disturbance, and ant invasion on Day 1, whereas only <5% of workers were present in the new nest site in the undisturbed control. After these disturbances, the brood was never relocated back to the original nest site in this 5-d study. When subjected to food depletion, ∼60% of the brood were found in the new nest site and ∼40% of the brood remained in the original nest on Day 5, resulting in a polydomous population. In contrast, moisture depletion did not show any significant effect on colony movement. These results provide useful information about the causes of Pharaoh ant colony budding and guidance about how to develop effective control and prevention strategies.

Matched MeSH terms: Desiccation
Physicochemical and functional properties of peeled and unpeeled pumpkin flour

Noor Aziah AA, Komathi CA

J Food Sci, 2009 Sep;74(7):S328-33.
PMID: 19895499 DOI: 10.1111/j.1750-3841.2009.01298.x

This study was intended to investigate the potential of peeled and unpeeled pumpkin pulp as a raw material for the production of flour that could be used in composite blend with wheat flour or as a functional ingredient in food products. The peeled and unpeeled pumpkin pulp were soaked in sodium metabisulphite solution, sliced and dried overnight in a hot air oven, followed by milling into peeled pumpkin pulp flour (PPPF) and unpeeled pumpkin pulp flour (UPPF), respectively. The flours were then evaluated for physicochemical attributes (color, proximate compositions, and water activity) and functional properties (water holding capacity and oil holding capacity), in comparison to the commercial wheat flour. PPPF and UPPF were observed to be more attractive in terms of color than wheat flour, as indicated by the significantly higher results (P or= 0.05) was shown in water holding capacity of PPPF and wheat flour. However, the oil holding capacity of PPPF and UPPF was shown to be significantly higher (P

Matched MeSH terms: Desiccation/methods

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links