A 1.7 m2 flat plate solar air heater was designed and developed in the Department of Agricultural Mechanization, The University of Agriculture Peshawar, Pakistan in collaboration with the Department of Environmental Sciences, University of Peshawar, Pakistan. It was operated under an average solar irradiance of 0.9 kJ.m-2.h-1 in the month of September, 2013. It worked under an efficiency of 7.5 to 21%. The heat collected by the air heater was given to air flowing as a medium inside it. This hot air was given to a drying section and water heating tank for drying and water heating purposes. The drying section provided a temperature in the range of 40-50oC and humidity of 10-30% from 10:00 am to 3:00 pm. The water heating tank provides hot water with a temperature of 35- 45oC from 10:00 am to 5:00 pm. Furthermore, the drying section was used to dry apples, onions and persimmons. All the products showed a consistent moisture loss from them with an optimum drying rate. The two term exponential model showed that all the three products dried have a good correlation with drying time with R2 values higher than 0.90. It was concluded that flat plate solar air heaters is the best technology for water heating and drying purposes and is a good alternative of conventional energy sources.