The energy-growth nexus has important policy implications for economic development. The results from many past studies that investigated the causality direction of this nexus can lead to misleading policy guidance. Using data on China from 1953 to 2013, this study shows that an application of causality test on the time series of energy consumption and national output has masked a lot of information. The Toda-Yamamoto test with bootstrapped critical values and the newly proposed non-linear causality test reveal no causal relationship. However, a further application of these tests using series in different time-frequency domain obtained from wavelet decomposition indicates that while energy consumption Granger causes economic growth in the short run, the reverse is true in the medium term. A bidirectional causal relationship is found for the long run. This approach has proven to be superior in unveiling information on the energy-growth nexus that are useful for policy planning over different time horizons.
The aim of the study is to estimate the nexus between energy insecurity and energy poverty with the role of climate change and other environmental concerns. We used DEA like WP methods and properties of MCDA, a most common form of data envelopment analysis (DEA) to estimate the nexus between constructs. This paper presents a measurement and analysis of G7 countries' energy, economic, social, and environmental performance associated with energy poverty indexes. The study used the multiple, comprehensive, and relevant set of indicators, including energy economics and environmental consideration of energy poverty. The net energy consumption of al G7 economies is equal to 34 percent of the entire world along with the net estimate GDP score of around 50 percent. Using DEA modelling and estimation technique, our research presented valuable insights for readers, theorists and policy makers on energy, environment, energy poverty and climate change mitigation. For this reasons, all these indicators combined in a mathematical composite indicator to measure energy, economic, social, and environmental performance index (EPI). Results show that Canada has the highest EPII score, which shows that Canada's capacity to deal with energy self-sufficiency, economic development, and environmental performance is greater than the other G7 countries. France and Italy rank second and third. Japan comes next with 0.50 EPI scores, while the USA has the lowest average EPI score environment vulnerable even though have higher economic development among the G7 group countries. We suggest a policy framework to strengthen the subject matter of the study.
This study focuses to investigate the relationship between globalization and the ecological footprint for Malaysia from 1971 to 2014. The results of the Bayer and Hanck cointegration test and the ARDL bound test show the existence of cointegration among variables. The findings disclose that globalization is not a significant determinant of the ecological footprint; however, it significantly increases the ecological carbon footprint. Energy consumption and economic growth stimulate the ecological footprint and carbon footprint in Malaysia. Population density reduces the ecological footprint and carbon footprint. Further, financial development mitigates the ecological footprint. The causality results disclose the feedback hypothesis between energy consumption and economic growth in the long run and short run.
This note describes a method for the determination of the peak-to-total ratio, P/T versus gamma-ray energy of range 59.54-1836.03 keV of a HPGe detector. Results show that this ratio decreases with energy. To check the validity of these results, two approaches of results comparison, namely with the ratio reported by Cesana and Terrani in year 1989 and with the shape of total efficiency reported by Debertin and Helmer in year 1988 were taken. lt is shown that this method gives satisfactory results since the obtained values of P/T and the shape of the total efficiency curve were in good agreement with the reported works. The precautional step that need to be taken when dealing with energy 59.54 keV 241Am source and the reason for taking the total efficiency as the evaluation tool are given.
The investigation into new sources of energy with the highest efficiency which are derived from existing energy sources is a significant research area and is attracting a great deal of interest. Radio frequency (RF) energy harvesting is a promising alternative for obtaining energy for wireless devices directly from RF energy sources in the environment. An overview of the energy harvesting concept will be discussed in detail in this paper. Energy harvesting is a very promising method for the development of self-powered electronics. Many applications, such as the Internet of Things (IoT), smart environments, the military or agricultural monitoring depend on the use of sensor networks which require a large variety of small and scattered devices. The low-power operation of such distributed devices requires wireless energy to be obtained from their surroundings in order to achieve safe, self-sufficient and maintenance-free systems. The energy harvesting circuit is known to be an interface between piezoelectric and electro-strictive loads. A modern view of circuitry for energy harvesting is based on power conditioning principles that also involve AC-to-DC conversion and voltage regulation. Throughout the field of energy conversion, energy harvesting circuits often impose electric boundaries for devices, which are important for maximizing the energy that is harvested. The power conversion efficiency (PCE) is described as the ratio between the rectifier's output DC power and the antenna-based RF-input power (before its passage through the corresponding network).
Titanium dioxide (TiO2 ) is one of the most widely investigated metal oxides because of its extraordinary surface, electronic, and photocatalytic properties. However, the large band gap of TiO2 and the considerable recombination of photogenerated electron-hole pairs limit its photocatalytic efficiency. Therefore, research attention is being increasingly directed towards engineering the surface structure of TiO2 on the atomic level (namely morphological control of {001} facets on the micro- and nanoscale) to fine-tune its physicochemical properties; this could ultimately lead to the optimization of selectivity and reactivity. This Review encompasses the fundamental principles to enhance the photocatalytic activity by using highly reactive {001}-faceted TiO2 -based composites. The current progress of such composites, with particular emphasis on the photodegradation of pollutants and photocatalytic water splitting for hydrogen generation, is also discussed. The progresses made are thoroughly examined for achieving remarkable photocatalytic performances, with additional insights with regard to charge transfer. Finally, a summary and some perspectives on the challenges and new research directions for future exploitation in this emerging frontier are provided, which hopefully would allow for harnessing the outstanding structural and electronic properties of {001} facets for various energy- and environmental-related applications.
The rapid advances in technology and improved living standard of the society necessitate abundant use of fossil fuels which poses two major challenges to any nation. One is fast depletion of fossil fuel resources; the other is environmental pollution. The porous medium combustion (PMC) has proved to be one of the technically and economically feasible options to tackle the aforesaid problems to a remarkable extent. PMC has interesting advantages compared with free flame combustion due to the higher burning rates, the increased power dynamic range, the extension of the lean flammability limits, and the low emissions of pollutants. This article provides a comprehensive picture of the global scenario of research and developments in PMC and its applications that enable a researcher to decide the direction of further investigation. The works published so far in this area are reviewed, classified according to their objectives and presented in an organized manner with general conclusions. A separate section is devoted for the numerical modeling of PMC.
Increasing energy use, climate change, and carbon dioxide (CO2) emissions from fossil fuels make switching to low-carbon fuels a high priority. Biofuels are a potential low-carbon energy source, but whether biofuels offer carbon savings depends on how they are produced. Converting rainforests, peatlands, savannas, or grasslands to produce food crop-based biofuels in Brazil, Southeast Asia, and the United States creates a "biofuel carbon debt" by releasing 17 to 420 times more CO2 than the annual greenhouse gas (GHG) reductions that these biofuels would provide by displacing fossil fuels. In contrast, biofuels made from waste biomass or from biomass grown on degraded and abandoned agricultural lands planted with perennials incur little or no carbon debt and can offer immediate and sustained GHG advantages.
Oil palm is widely grown in Malaysia. Palm oil has attracted the attention of researchers to develop an 'environmentally friendly' and high quality fuel, free of nitrogen and sulfur. In the present study, the catalytic cracking of palm oil to biofuel was studied over REY catalyst in a transport riser reactor at atmospheric pressure. The effect of reaction temperature (400-500 degrees C), catalyst/palm oil ratio (5-10) and residence time (10-30s) was studied over the yield of bio-gasoline and gas as fuel. Design of experiments was used to study the effect of operating variables over conversion of palm oil and yield of hydrocarbon fuel. The response surface methodology was used to determine the optimum value of the operating variables for maximum yield of bio-gasoline fraction in the liquid product obtained.
The aim of this research is to explore the effect of biomass energy consumption on CO2 emissions in 80 developed and developing countries. To achieve robustness, the system generalised method of moment was used and several control variables were incorporated into the model including real GDP, fossil fuel consumption, hydroelectricity production, urbanisation, population, foreign direct investment, financial development, institutional quality and the Kyoto protocol. Relying on the classification of the World Bank, the countries were categorised to developed and developing countries. We also used a dynamic common correlated effects estimator. The results consistently show that biomass energy as well as fossil fuel consumption generate more CO2 emissions. A closer look at the results show that a 100% increase in biomass consumption (tonnes per capita) will increase CO2 emissions (metric tons per capita) within the range of 2 to 47%. An increase of biomass energy intensity (biomass consumption in tonnes divided by real gross domestic product) of 100% will increase CO2 emissions (metric tons per capita) within the range of 4 to 47%. An increase of fossil fuel consumption (tonnes of oil equivalent per capita) by 100% will increase CO2 emissions (metric tons per capita) within the range of 35 to 55%. The results further show that real GDP urbanisation and population increase CO2 emissions. However, hydroelectricity and institutional quality decrease CO2 emissions. It is further observed that financial development, foreign direct investment and openness decrease CO2 emissions in the developed countries, but the opposite results are found for the developing nations. The results also show that the Kyoto Protocol reduces emission and that Environmental Kuznets Curve exists. Among the policy implications of the foregoing results is the necessity of substituting fossil fuels with other types of renewable energy (such as hydropower) rather than biomass energy for reduction of emission to be achieved.
Alternative energy policies targeting the adoption of hydrogen fuel cell vehicles (HFCVs) could have significant positive impacts on Malaysia's ability to meet both its carbon reduction goal and its energy security needs. The transport sector generally contributes heavily to carbon emissions, and is also difficult to decarbonize because of the costs associated with many greener options. This study explores the possibility of decarbonizing the Malaysian transport sector by promoting the use of hydrogen vehicles, and analyzes the adoption challenges and economic obstacles (especially public acceptance) associated with introducing HFCVs. This study contends that the adoption challenges of this new technology can be overcome through the use of development strategies outlined. This study also addresses the regulatory framework that Malaysia (and other countries) might use to overcome common policy adoption challenges of HFCVs.
This paper presents the preliminary steps required for conducting experiments to obtain the optimal operating conditions of a hybrid impeller mixer and to determine the residence time distribution (RTD) using computational fluid dynamics (CFD). In this paper, impeller speed and clearance parameters are examined. The hybrid impeller mixer consists of a single Rushton turbine mounted above a single pitched blade turbine (PBT). Four impeller speeds, 50, 100, 150, and 200 rpm, and four impeller clearances, 25, 50, 75, and 100 mm, were the operation variables used in this study. CFD was utilized to initially screen the parameter ranges to reduce the number of actual experiments needed. Afterward, the residence time distribution (RTD) was determined using the respective parameters. Finally, the Fluent-predicted RTD and the experimentally measured RTD were compared. The CFD investigations revealed that an impeller speed of 50 rpm and an impeller clearance of 25 mm were not viable for experimental investigations and were thus eliminated from further analyses. The determination of RTD using a k-ε turbulence model was performed using CFD techniques. The multiple reference frame (MRF) was implemented and a steady state was initially achieved followed by a transient condition for RTD determination.
In this day and age, with the ever-growing population and energy demand, we should take the renewable option route in our energy source. We should also keep in mind that said energy should not cause any lasting environmental damage, one of the perfect example being solar energy. A country that is hot and sunny all year long is the perfect contributor to solar energy, case in point, Malaysia. With that in mind Solar Tree is designed and developed to facilitate consumers who need electric power at any place, anytime, anywhere. The objective of this study is to assess a mini project in the likes of Solar Tree that can generate electricity without harming the environment, despite the weather. Intended specifically to be a mini project, it is understandable that electricity generated is limited, with only up to 500W in total. As a trial, two electronic devices were tested, specifically a mobile phone and a laptop, as both devices are used almost every day. The data collected is then tabulated and analysed. It was concluded the solar tree developed proved efficient in charging both devices and will continue to do so given enough sunlight.
In this paper, an integrated thermoelectric (TE) and photovoltaic (PV) hybrid energy harvesting system (HEHS) is proposed for self-powered internet of thing (IoT)-enabled wireless sensor networks (WSNs). The proposed system can run at a minimum of 0.8 V input voltage under indoor light illumination of at least 50 lux and a minimum temperature difference, ∆T = 5 °C. At the lowest illumination and temperature difference, the device can deliver 0.14 W of power. At the highest illumination of 200 lux and ∆T = 13 °C, the device can deliver 2.13 W. The developed HEHS can charge a 0.47 F, 5.5 V supercapacitor (SC) up to 4.12 V at the combined input voltage of 3.2 V within 17 s. In the absence of any energy sources, the designed device can back up the complete system for 92 s. The sensors can successfully send 39 data string to the webserver within this time at a two-second data transmission interval. A message queuing telemetry transport (MQTT) based IoT framework with a customised smartphone application 'MQTT dashboard' is developed and integrated with an ESP32 Wi-Fi module to transmit, store, and monitor the sensors data over time. This research, therefore, opens up new prospects for self-powered autonomous IoT sensor systems under fluctuating environments and energy harvesting regimes, however, utilising available atmospheric light and thermal energy.
We report the draft genome sequence of Variovorax boronicumulans strain c24, which was isolated from a soil-inoculated chemostat culture amended with phenol as a sole carbon and energy source. The genome data will provide insights into phenol and other xenobiotic compound degradation mechanisms for bioremediation applications.
Nuclear power is considered as one of the best option for future energy development in Malaysia. Since Malaysia has no experience in nuclear energy generation, commissioning the first nuclear power plant needs tremendous effort in various aspects. Site selection is one of important step in nuclear power plant commissioning process. This paper proposes candidate sites for nuclear power plant in Mersing, Kota Tinggi, Muar and Batu Pahat district in Johor, Malaysia. The candidate selection process uses the IAEA document and AELB guideline as main reference, supported by site selection procedure by various countries. MapInfo Professional software was used to simulate the selection process for candidate areas for the nuclear power plant. This paper concluded that Tenggaroh and Jemaluang area are the most suitable area for nuclear power plant facilities in Johor, Malaysia.
Nuclear power is considered as one of the best option for future energy development in Malaysia. Since Malaysia has no experience in nuclear energy generation, commissioning the first nuclear power plant needs tremendous effort in various aspects. Site selection is one of important step in nuclear power plant commissioning process. This paper proposes candidate sites for nuclear power plant in Mersing, Kota Tinggi, Muar and Batu Pahat district in Johor, Malaysia. The candidate selection process uses the IAEA document and AELB guideline as main reference, supported by site selection procedure by various countries. Mapinfo Professional software was used to simulate the selection process for candidate areas for the nuclear power plant. This paper concluded that Tenygaroh and Jemaluang area are the most suitable area for nuclear power plant facilities in Johor, Malaysia.
Muhammad Adil Khattak, Nurul Syahrizzat Mohd Yasin, Hannah Natasha Andjani, Puteri Nurailah Husna Mohd Tajuddin, Sakeshraj Narajah, See, Zhi Fei, et al.
Geopolitical risks will less affect the oil supply in the United States due to its stability
and widespread oil sectors since 1970s. Nevertheless, energy prosperity in the United
States appears differently in relation to a fuller period for conventional energy export
states where geopolitical challenges have been intensified by monetary pressure and
escalating energy demand in residential areas. The relationship between the United
States and other energy export states will continue to change as the United States
becomes more independent and non-OPEC resources become worthwhile especially
in Western Hemisphere. With expansion of global economic growth, maintained
multilateral relationship among countries and technological development are two
prominent concerns to secure long-term energy supplies and to enable further
exploration of new energy sources.
The study estimates the long-run dynamics of a cleaner environment in promoting the gross domestic product of E7 and G7 countries. The recent study intends to estimate the climate change mitigation factor for a cleaner environment with the GDP of E7 countries and G7 countries from 2010 to 2018. For long-run estimation, second-generation panel data techniques including augmented Dickey-Fuller (ADF), Phillip-Peron technique and fully modified ordinary least square (FMOLS) techniques are applied to draw the long-run inference. The results of the study are robust with VECM technique. The outcomes of the study revealed that climate change mitigation indicators significantly affect the GDP of G7 countries than that of E7 countries. The GDP of both E7 and G7 countries is found depleting due to less clean environment. However, green financing techniques helps to clean the environment and reinforce the confidence of policymakers on the elevation of green economic growth in G7 and E7 countries. Furthermore, study results shown that a 1% rise in green financing index improves the environmental quality by 0.375% in G7 countries, while it purifies 0.3920% environment in E7 countries. There is a need to reduce environmental pollution, shift energy generation sources towards alternative, innovative and green sources.The study also provides different policy implications for the stakeholders guiding to actively promote financial hedging for green financing. So that climate change and envoirnmental pollution reduction could be achieved effectively. The novelty of the study lies in study framework.
Economic integration in the form of Belt and Road Initiative project opens many opportunities and hazards, especially of the participating nations' environment. The current study attempted to empirically test the economic and energy usage (renewable and non-renewable) impact on some selected countries of belt and road projects. For this purpose, the panel data set of twenty-four emerging economies of belt and road projects was selected from 1995 to 2014. The autoregressive distributed lags technique of econometric applied to determine the effect of renewable and non-renewable energy, GDP and GDP2 for EKC, and gross fixed capital formation on carbon emission in the selected countries of Belt and Road Initiative project. The outcomes of this study confirm the existence of EKC in these underlined countries. Here, fossil fuel-based energy consumption is a source of environmental degradation, while renewable and clean energy usage can help sustain environmental conditions without affecting economic growth progress. Capital fixed formation in these economies can enhance economic growth and help to sustainable environmental conditions in the belt and road countries. Thus, based on these empirical outcomes, this study suggests economic and financial assistance in green renewable energy sources and clean technological innovation to enhance economic benefits of Belt and Road Initiative project without compromising the environmental conditions of the region.