The objective of this study was to improve product quality of dehydrated fruits (apple, pear, papaya, mango) using combined drying techniques. This involved investigation of bioactivity, colour, and sensory assessment on colour of the dried products as well as the retention of the bio-active ingredients. The attributes of quality were compared in regard to the quality of dehydrated samples obtained from continuous heat pump (HP) drying technique. It was found that for apple, pear and mango the total colour change (ΔE) of samples dried using continuous heat pump (HP) or heat pump vacuum-microwave (HP/VM) methods was lower than of samples dried by other combined methods. However, for papaya, the lowest colour change exhibited by samples dried using hot air-cold air (HHC) method and the highest colour change was found for heat pump (HP) dehydrated samples. Sensory evaluation revealed that dehydrated pear with higher total colour change (ΔE) is more desirable because of its golden yellow appearance. In most cases the highest phenol content was found from fruits dried by HP/VM method. Judging from the quality findings on two important areas namely colour and bioactivity, it was found that combined drying method consisted of HP pre-drying followed by VM finish drying gave the best results for most dehydrated fruits studied in this work as the fruits contain first group of polyphenol compounds, which preferably requires low temperature followed by rapid drying strategy.
Influx of foreign students in Malaysia calls for a study on safety of food in Malaysia restaurants as perceived by them. This study aims to investigate perception of foreign students regarding food safety and personal hygiene practice of food handlers in Malaysia restaurants. A six sections Likert scale questionnaire was used. A total of 350 questionnaires were distributed during this study between March 2011 and March 2012 to the international students from 26 countries of the world in various public and private institutions of higher learning in Klang Valley, Malaysia. Among the distributed questionnaires, only 155 were correctly filled, retrieved and analyzed. Ninety-one respondents (59%) were male while 63 (41%) were females. A total of 107 (69%) were undergraduates and 29 (19%) were postgraduate students. One hundred and thirty-nine (90%) respondents were local or foreign restaurants. Eleven respondents (7%) did not patronize any of the restaurants. Among factors influencing choice of restaurants are closeness to residence, price of food and quality of food were the most important factors 62 (38%). Twenty-seven (28%) eat in restaurants because of the similarity of the food to that of their home country. Of the most preferred food, Nasi ayam, 89 (57%) top the list, next was Nasi goreng ayam, 14 (14%) and African food, 23 (15%). Nasi lemak was the least food preferred 3 (2%). A total of 104 (67%) respondents were of the opinion that handlers kept short nails, 91 (59%) do not pick nose, 108 (55%) stated that food handlers cough or sneeze while handling food. Ninety-eight respondents (64%) also stated that serving of food with unprotected hands were observed. The result of this study showed that although food handlers are aware of the need for personal hygiene, more awareness needs to be created.
Kenaf seed oil has been suggested to be used as nutritious edible oil due to its unique fatty acid composition and nutritional value. The objective of this study was to optimize the bleaching parameters of the chemical refining process for kenaf seed oil, namely concentration of bleaching earth (0.5 to 2.5% w/w), temperature (30 to 110 °C) and time (5 to 65 min) based on the responses of total oxidation value (TOTOX) and color reduction using response surface methodology. The results indicated that the corresponding response surface models were highly statistical significant (P < 0.0001) and sufficient to describe and predict TOTOX value and color reduction with R2 of 0.9713 and 0.9388, respectively. The optimal parameters in the bleaching stage of kenaf seed oil were: 1.5% w/w of the concentration of bleaching earth, temperature of 70 °C, and time of 40 min. These optimum parameters produced bleached kenaf seed oil with TOTOX value of 8.09 and color reduction of 32.95%. There were no significant differences (P > 0.05) between experimental and predicted values, indicating the adequacy of the fitted models.
Kenaf ( Hibiscus cannabinus L.) seed oil has been proven for its multi-pharmacological benefits; however, its poor water solubility and stability have limited its industrial applications. This study was aimed to further improve the stability of pre-developed kenaf seed oil-in-water nanoemulsions by using food-grade ternary emulsifiers. The effects of emulsifier concentration (1, 5, 10, 15% w/w), homogenisation pressure (16,000, 22,000, 28,000 psi), and homogenisation cycles (three, four, five cycles) were studied to produce high stability of kenaf seed oil-in-water nanoemulsions using high pressure homogeniser. Generally, results showed that the emulsifier concentration and homogenisation conditions had great effect ( p food and nutraceutical industries.
Anhydrous milkfat (AMF) was fractionated to obtain a series of high-melting milkfat fractions (HMF). Solid fat content (SFC) of HMF as determined by nuclear magnetic resonance (NMR) was in the range 37.6-43.6% and 21.2-27.5% measured at 20 and 30 degrees C, respectively. The HMF have a higher melting characteristic compared to AMF as analyzed by differential scanning calorimetry (DSC) with melting enthalpies of 92.2-105.0 J/g and melting peak temperatures of 39.3-41.5 degrees C. The AMF was also blended with soft palm stearin (SPOs and/or hard palm stearin (HPOs)) according to a three conventional component mixture design which providing suitable formulations for HMF. This represented three selected blends of AMF:SPOs:HPOs at three different proportions (70:15:15, 60:30:10 and 50:45:5), having SFC and DSC melting characteristics of HMF. The study revealed that higher-melting characteristics of AMF could be achieved equally well by using both fractionation and blending techniques.
Flour was prepared from peeled and unpeeled banana Awak ABB. Samples prepared were subjected to analysis for determination of chemical composition, mineral, dietary fibre, starch and total phenolics content, antioxidant activity and pasting properties. In general, flour prepared from unpeeled banana was found to show enhanced nutrition values with higher contents of mineral, dietary fibre and total phenolics. Hence, flour fortified with peel showed relatively higher antioxidant activity. On the other hand, better pasting properties were shown when banana flour was blended with peel. It was found that a relatively lower pasting temperature, peak viscosity, breakdown, final viscosity and setback were evident in a sample blended with peel.
The foods we eat contain microorganisms that we ingest alongside the food. Industrialized food systems offer great advantages from a safety point of view, but have also been accused of depleting the diversity of the human microbiota with negative implications for human health. In contrast, artisanal traditional foods are potential sources of a diverse food microbiota. Traditional foods of the Greenlandic Inuit are comprised of animal-sourced foods prepared in the natural environment and are often consumed raw. These foods, some of which are on the verge of extinction, have not previously been microbiologically characterized. We mapped the microbiota of foods stemming from traditional Inuit land-based hunting activities. The foods included in the current study are dried muskox and caribou meat, caribou rumen and intestinal content as well as larval parasites from caribou hides, all traditional Inuit foods. This study shows that traditional drying methods are efficient for limiting microbial growth through desiccation. The results also show the rumen content of the caribou to be a highly diverse source of microbes with potential for degradation of plants. Finally, a number of parasites were shown to be included in the biodiversity of the assessed traditional foods. Taken together, the results map out a diverse source of ingested microbes and parasites that originate from the natural environment. These results have implications for understanding the nature-sourced traditional Inuit diet, which is in contrast to current day diet recommendations as well as modern industrialized food systems.
Muslim tourism is one of the most rapidly developing sectors in the international tourism industry. Nevertheless, halal food performance and its relationship with international Muslim traveler decision-making and behaviors have not been sufficiently examined. The present research explored the influence of halal food performance, which encompasses availability, health/nutrition, accreditation, and cleanness/safety/hygiene factors, on the Muslim traveler retention process at a non-Islamic destination. A survey methodology with a quantitative data analytic approach was employed to achieve research goals. Our findings indicated that halal food performance increased destination trust and destination attachment, which in turn influenced Muslim traveler retention. Additionally, the efficacy of the higher-order framework of halal food performance was defined. Both destination trust and attachment mediated the effect of halal food performance on retention. A halal-friendly destination image included a moderating influence on the retention process. The effectiveness of the proposed theoretical framework for explicating Muslim traveler behaviors was uncovered. This research better introduces the importance of halal food performance and its attributes for the elicitation of Muslim traveler approach responses and behaviors at a non-Islamic destination to researchers and practitioners.
According to the World Health Organisation (WHO), globally 600 million people suffer
from food-borne diseases (FBD), and 420,000 people die as a result. The European Food
Safety Authority (EFSA) has stated that FBD are linked to the food industry, with the
most common means of transmission being due to poor food handling and hygiene by
food handlers working in the food industry. The aim of this research was to investigate the
effectiveness of mandatory food handler training programmes (FHTP) to prevent FBD in
Malaysia and Ireland. To do this, the FHTP existing in Malaysia and Ireland were
analysed, in addition to the legislation they fall under in each respective country.
Effectiveness was determined by investigating the level of food safety knowledge (FSK)
and food safety practices (FSP) of food handlers in Malaysia and Ireland. A systematic
literature review (SLR) and a narrative literature review (NLR) were conducted for this
research. The SLR was based on the PRISMA diagram, using the Confidence in the
Evidence from Reviews of Qualitative research (CERQual) approach to evaluate the
studies used for this research. A total of 8 Malaysian studies and 1 Irish study were used to
determine the level of FSK and FSP of food handlers in each respective country, to
examine the effectiveness of FHTP. The results of the studies used for this research have
depicted overall good FSP and FSK of food handlers in Malaysia and Ireland; yet trends
continue to show that food handlers are one of the biggest contributors to FBD,
demonstrating that FHTP are not effective in preventing FBD. The findings from this
research highlights that although these trainings can be an effective tool to prevent FBD, if
they are not executed correctly, food handlers will continue to contribute to FBD.
Diseases spread through food still remain a common and persistent problems resulting in appreciable morbidity and occasional mortality. Food handlers play an important role in ensuring food safety throughout the chain of production, processing, storage and preparation. This study is to explore the pattern of sociodemographic distribution and to determine knowledge, attitude and practice of food handlers towards food-borne diseases and food safety. A total of 430 food handlers were randomly selected from Kota Bharu district and interviewed by using structured questionnaire. Distribution of food handlers was Malays (98.8%), females (69.5%), married (81.4%), working in food stalls (64.2%), involved in operational areas (49.3%), having no license (54.2%) and immunized with Ty2 (60.7%). The mean age was 41 +/- 12 years and the mean income was RM 465 +/- 243/month. The educational level was found as no formal education (10.5%), primary school (31.9%), secondary school (57.0%) and diploma/degree holders (0.7%). A significant number of food handlers (57.2%) had no certificate in food handlers training program and 61.9% had undergone routine medical examinations (RME). Almost half (48.4%) had poor knowledge. Multiple logistic regression showed type of premise [Odd ratio (OR) = 4.0, 95% Confidence interval (CI) =1.8-7.5, p = 0.0004], educational level (OR = 4.0, 95% CI = 1.8-7.4, p = 0.0003) and job status of food handlers (OR = 0.5, 95% CI = 0.3-0.8, p = 0.0031) significantly influenced the level score of knowledge. No significant difference of attitude and practice between trained and untrained food handlers. Findings of this preliminary study may help in planning health education intervention programs for food handlers in order to have improvement in knowledge, attitude and practice towards food-borne diseases and food safety. Furthermore, it will in turn reduce national morbidity and mortality of food-borne diseases.
The potential of Parthenium sp. as a feedstock for enzymatic saccharification was investigated by using chemical and biological pretreatment methods. Mainly chemical pretreatments (acid and alkali) were compared with biological pretreatment with lignolytic fungi Marasmiellus palmivorus PK-27. Structural and chemical changes as well as crystallinity of cellulose were examined through scanning electron microscopy, fourier transform infra red and X-ray diffraction analysis, respectively after pretreatment. Total reducing sugar released during enzymatic saccharification of pretreated substrates was also evaluated. Among the pretreatment methods, alkali (1% NaOH) treated substrate showed high recovery of acid perceptible polymerised lignin (7.53 ± 0.5 mg/g) and significantly higher amount of reducing sugar (513.1 ± 41.0 mg/gds) compared to uninoculated Parthenium (163.4 ± 21.2) after 48 h of hydrolysis. This is the first report of lignolytic enzyme production from M. palmivorus, prevalent in oil palm plantations in Malaysia and its application in biological delignification of Parthenium sp. Alkali (1% NaOH) treatment proves to be the suitable method of pretreatment for lignin recovery and enhanced yield of reducing sugar which may be used for bioethanol production from Parthenium sp.
Lipases are enzyme with versatile industrial applications can be produced by the solid-state fermentation (SSF) method and is an economical alternative for enzyme production assisted by fungus. In Malaysia, 5 million of copra waste were generated annually. Large amount of copra waste produced will cause an increasing amount of the waste dumped to the landfill. Copra waste is one of the potential substrates to produce lipase enzyme through SSF. Thus, the aim of this study is to optimize the lipase production by SSF associated by Aspergillus niger using the 23 full factorial design approach. In this study the factors affecting parameters that involved in the production of lipase enzyme such as temperature (25˚ and 35˚), substrates concentration (40% and 60%) and inoculum size of Aspergillus niger (1 and 9 petri dish) were determined. The maximum production of lipase was obtained after 120-hour incubation in SSF. The optimum condition for inoculum size of Aspergillus niger was 9 plates, 30°C of incubation temperature and 60 % moisture contents. The range of the concentration of lipase enzyme produced varied from 105 U/ml to 170 U/ml. When applied to the wastewater treatment, the reducing percentage of fat, oil and grease (FOG) in food processing wastewater is reduced from 219.4925mg/l to 169.467mg/l accounted to the amount of 34 % FOG removal. Lipase produced using copra waste as a substrate using SSF has the potential value to be developed in the future for various industry including wastewater treatment industry.
The synthesis of graphene by double thermal chemical vapor deposition (DTCVD) using waste of industrial cooking oil (WICO) as a natural carbon source was investigated. The synthesis parameter (Argon gas flow rate) was varied between 50sccm to 300sccm by 50sccm increments. The function of Argon gas is to provide ambient condition, remove the atmospheric air from the tube and could improve the crystallinity of graphene during synthesis. WICO (from AYAMAS food processing) was placed in the first furnace (precursor furnace) and nickel was placed in the second furnace (deposition furnace). During the synthesis, elevated quantities of carbon from the source material are separated and precipitated on the Nickel surface. The sample were characterized by using Field Emission Scanning Electron Microscopy (FESEM), X-Ray Diffraction (XRD), Energy Dispersive X-ray (EDX), and Ultraviolet Visible (UV-Vis) spectroscopy. Based on FESEM images, at 250sccm, hexagonal graphene formation was observed. Besides, optical properties can be seen by UV-Vis and as the results show that 250sccm is the highest reflectivity value. Consequently, graphene synthesis from WICO using various Argon gas flow rate as precursor is successfully demonstrated.
The authentication of food products is essential for food quality and safety. Authenticity assessments are important to ensure that the ingredients or contents of food products are legitimate and safe to consume. The metabolomics approach is an essential technique that can be utilized for authentication purposes. This study aimed to summarize food authentication through the metabolomics approach, to study the existing analytical methods, instruments, and statistical methods applied in food authentication, and to review some selected food commodities authenticated using metabolomics-based methods. Various databases, including Google Scholar, PubMed, Scopus, etc., were used to obtain previous research works relevant to the objectives. The review highlights the role of the metabolomics approach in food authenticity. The approach is technically implemented to ensure consumer protection through the strict inspection and enforcement of food labeling. Studies have shown that the study of metabolomics can ultimately detect adulterant(s) or ingredients that are added deliberately, thus compromising the authenticity or quality of food products. Overall, this review will provide information on the usefulness of metabolomics and the techniques associated with it in successful food authentication processes, which is currently a gap in research that can be further explored and improved.
The present study examined the contents of tocopherols and tocotrienols and their distribution in 58 different varieties of whole rice cultivated in Malaysia. The analytical method used was saponification of samples followed by dispersive liquid-liquid microextraction and reverse phase high-performance liquid chromatography.
Palm oil (PO ; iodin value = 52), palm stearin (POs1; i.v. = 32 and POs2; i.v. = 40) and palm kernel oil (PKO; i.v. = 17) were blended in ternary systems. The blends were then studied for their physical properties such as melting point (m.p.), solid fat content (SFC), and cooling curve. Results showed that palm stearin increased the blends melting point while palm kernel oil reduced it. To produce table margarine with melting point (m.p.) below 40 degrees C, the POs1 should be added at level of < or = 16%, while POs2 at level of < or = 20%. At 10 degrees C, eutectic interaction occur between PO and PKO which reach their maximum at about 60:40 blending ratio. Within the eutectic region, to maintain the SFC at 10 degrees C to be < or = 50%, POs1 may be added at level of < or = 7%, while POs2 at level of < or = 12%. The addition of palm stearin increased the blends solidification Tmin and Tmax values, while PKO reduced them. Blends which contained high amount of palm stearin showed melting point and cooling curves quite similar to that of pastry margarine.
The main challenge in microfiltration (MF) is membrane fouling, which leads to a significant decline in permeate flux and a change in membrane selectivity over time. This work aims to elucidate the mechanisms of membrane fouling in cold MF of skim milk by identifying and quantifying the proteins and minerals involved in external and internal membrane fouling. Microfiltration was conducted using a 1.4-μm ceramic membrane, at a temperature of 6±1°C, cross-flow velocity of 6m/s, and transmembrane pressure of 159kPa, for 90min. Internal and external foulants were extracted from a ceramic membrane both after a brief contact between the membrane and skim milk, to evaluate instantaneous adsorption of foulants, and after MF. Four foulant streams were collected: weakly attached external foulants, weakly attached internal foulants, strongly attached external foulants, and strongly attached internal foulants. Liquid chromatography coupled with tandem mass spectrometry analysis showed that all major milk proteins were present in all foulant streams. Proteins did appear to be the major cause of membrane fouling. Proteomics analysis of the foulants indicated elevated levels of serum proteins as compared with milk in the foulant fractions collected from the adsorption study. Caseins were preferentially introduced into the fouling layer during MF, when transmembrane pressure was applied, as confirmed both by proteomics and mineral analyses. The knowledge generated in this study advances the understanding of fouling mechanisms in cold MF of skim milk and can be used to identify solutions for minimizing membrane fouling and increasing the efficiency of milk MF.
Sufficient knowledge on food safety and diligence during food handling are crucial to food safety and hygiene practices. A casual approach to handling food in the kitchen on a regular basis may link to foodborne pathogens, contaminations, and adverse health effects. The purpose of this study is to identify the right practices and behaviour among culinary students in terms of food hygiene practices and food safety perspectives. The methodology employed includes observations on 18 food culinary students in an actual kitchen setting. Effective food hygiene and food safety implementation are needed to improve the effectiveness of health education programmes for food handlers. The results suggest that transmission reduction of food pathogens, knowledge transfer and food safety training in selective industry criteria with proper guidelines should be introduced to produce a competent workforce.
Introduction: A prebiotic such as inulin is a well-known functional plant food ingredient. It is capable of stimulating growth of beneficial bifidobacteria in the intestine thus protecting against intestinal infections, preventing constipation, increasing mineral absorption, reducing the incidence of colon cancer, and producing B vitamins. Inulin added to food therefore has to be stable during food processing especially against heat treatment, low pH and Maillard reaction. Methods: Newly developed dark chocolate, DC-1, containing inulin (replacing sugar component) as an added value, was stored at 18oC, 60% relative humidity and 25oC, 80% relative humidity (RH) to determine shelf life stability compared to control dark chocolate, DC-0 (with high content of sugar). Sensory evaluation (quantitative descriptive analysis), water activity (aw), microbiological content and presence of inulin after storage of the prebiotic chocolate under both conditions were evaluated to determine shelf life. Results: The DC-1 chocolate had at least 12 months of shelf life at 18oC, 60% RH with better acceptance than DC-0; moreover, it did not experience microbiological and inulin content changes. At 25oC, 80% RH, the growth of Aspergillus sp. was observed on the surface of both DC-0 and DC-1 with aw >0.50 after a 2-month storage. Conclusion: Shelf life stability of DC-1 is almost similar to DC-0.
High-quality DNA extracts are imperative for downstream applications in molecular identification. Most processed food products undergo heat treatments causing DNA degradation, which hampers application of DNA-based techniques for food authentication. Moreover, the presence of inhibitors in processed food products is also problematic, as inhibitors can impede the process of obtaining high qualities and quantities of DNA. Various approaches in DNA extraction and factors in structure and texture of various food matrices affecting DNA extraction are explained in this review.