Surface modified Multi-walled carbon nanotubes (MWCNTs) Buckypaper/Polyvinyl Alcohol (BP/PVA) composite membrane was synthesized and utilized as support material for immobilization of Jicama peroxidase (JP). JP was successfully immobilized on the BP/PVA membrane via covalent bonding by using glutaraldehyde. The immobilization efficiency was optimized using response surface methodology (RSM) with the face-centered central composite design (FCCCD) model. The optimum enzyme immobilization efficiency was achieved at pH 6, with initial enzyme loading of 0.13 U/mL and immobilization time of 130 min. The results of BP/PVA membrane showed excellent performance in immobilization of JP with high enzyme loading of 217 mg/g and immobilization efficiency of 81.74%. The immobilized system exhibited significantly improved operational stability under various parameters, such as pH, temperature, thermal and storage stabilities when compared with free enzyme. The effective binding of peroxidase on the surface of the BP/PVA membrane was evaluated and confirmed by Field emission scanning electron microscopy (FESEM) coupled with Energy Dispersive X-Ray Spectroscopy (EDX), Fourier transform infrared spectroscopy (FTIR) and Thermogravimetric Analysis (TGA). This work reports the characterization results and performances of the surface modified BP/PVA membrane for peroxidase immobilization. The superior properties of JP-immobilized BP/PVA membrane make it promising new-generation nanomaterials for industrial applications.
A study was conducted to determine whether supplementing AminoGut (a commercial dietary supplement containing a mixture of l-glutamine and l-glutamic acid) to broiler chickens stocked at 2 different densities affected performance, physiological stress responses, foot pad dermatitis incidence, and intestinal morphology and microflora. A randomized design in a factorial arrangement with 4 diets [basal diet, basal diet + 0.5% AminoGut from d 1 to 21, basal diet + 0.5% AminoGut from d 1 to 42, and basal diet + virginiamycin (0.02%) for d 1 to 42] and 2 stocking densities [0.100 m(2)/bird (23 birds/pen; LD) or 0.067 m(2)/bird (35 birds/pen; HD)]. Results showed that villi length and crypt depth were not changed by different dietary treatments. However, birds in the HD group had smaller villi (P = 0.03) compared with those of the LD group. Regardless of diet, HD consistently increased the serum concentrations of ceruloplasmin, α-1 acid glycoprotein, ovotransferin, and corticosterone (P = 0.0007), and elevated heterophil to lymphocyte ratio (0.0005). Neither AminoGut supplementation nor stocking density affected cecal microflora counts. In conclusion, under the conditions of this study, dietary supplementation of AminoGut, irrespective of stocking density, had no beneficial effect on growth performance, intestinal morphology, and physiological adaptive responses of broiler chickens raised under hot and humid tropical conditions. However, AminoGut supplementation from d 1 to 42 was beneficial in reducing mortality rate. Also, the increased serum concentrations of a wide range of acute phase proteins together with elevated corticosterone and heterophil to lymphocyte ratio suggested that high stocking density induced an acute phase response either indirectly as a result of increased incidence of inflammatory diseases such as foot pad dermatitis or possibly as a direct physiological response to the stress of high stocking density.
An efficient system for shoot regeneration and Agrobacterium tumefaciens-mediated transformation of Brassica oleracea cv. Green Marvel cultivar is described. This study focuses on developing shoot regeneration from hypocotyl explants of broccoli cv. Green Marvel using thidiazuron (TDZ), zeatin, and kinetin, the optimization of factors affecting Agrobacterium-mediated transformation of the hypocotyl explants with heat-resistant cDNA, followed by the confirmation of transgenicity of the regenerants. High shoot regeneration was observed in 0.05-0.1 mg dm(-3) TDZ. TDZ at 0.1 mg dm(-3) produced among the highest percentage of shoot regeneration (96.67 %) and mean number of shoot formation (6.17). The highest percentage (13.33 %) and mean number (0.17) of putative transformant production were on hypocotyl explants subjected to preculture on shoot regeneration medium (SRM) with 200 µM acetosyringone. On optimization of bacterial density and inoculation time, the highest percentage and mean number of putative transformant production were on hypocotyl explants inoculated with a bacterial dilution of 1:5 for 30 min. Polymerase chain reaction (PCR) assay indicated a transformation efficiency of 8.33 %. The luciferase assay showed stable integration of the Arabidopsis thaliana HSP101 (AtHSP101) cDNA in the transgenic broccoli regenerants. Three out of five transgenic lines confirmed through PCR showed positive hybridization bands of the AtHSP101 cDNA through Southern blot analysis. The presence of AtHSP101 transcripts in the three transgenic broccoli lines indicated by reverse transcription-PCR (RT-PCR) confirmed the expression of the gene. In conclusion, an improved regeneration system has been established from hypocotyl explants of broccoli followed by successful transformation with AtHSP101 for resistance to high temperature.
Atmospheric corrections for multi-temporal optical satellite images are necessary, especially in change detection analyses, such as normalized difference vegetation index (NDVI) rationing. Abrupt change detection analysis using remote-sensing techniques requires radiometric congruity and atmospheric correction to monitor terrestrial surfaces over time. Two atmospheric correction methods were used for this study: relative radiometric normalization and the simplified method for atmospheric correction (SMAC) in the solar spectrum. A multi-temporal data set consisting of two sets of Landsat images from the period between 1991 and 2002 of Penang Island, Malaysia, was used to compare NDVI maps, which were generated using the proposed atmospheric correction methods. Land surface temperature (LST) was retrieved using ATCOR3_T in PCI Geomatica 10.1 image processing software. Linear regression analysis was utilized to analyze the relationship between NDVI and LST. This study reveals that both of the proposed atmospheric correction methods yielded high accuracy through examination of the linear correlation coefficients. To check for the accuracy of the equation obtained through linear regression analysis for every single satellite image, 20 points were randomly chosen. The results showed that the SMAC method yielded a constant value (in terms of error) to predict the NDVI value from linear regression analysis-derived equation. The errors (average) from both proposed atmospheric correction methods were less than 10%.
This paper presents the adsorption capacity of a biosorbent derived from the inner part of durian (Durio zibethinus) rinds, which are a low-cost and abundant agro-waste material. The durian rind sorbent has been successfully utilized to remove lanthanum (La) and yttrium (Y) ions from their binary aqueous solution. The effects of several adsorption parameters including contact time, pH, concentrations of La and Y, and temperature on the removal of La and Y ions were investigated. The adsorption isotherm and kinetics of the metal ions were also evaluated in detail. Both La and Y ions were efficiently adsorbed by the biosorbent with optimum adsorption capacity as high as 71 mg La and 35 mg Y per gram biosorbent, respectively. The simultaneous adsorption of La and Y ions follows Langmuir isotherm model, due to the favorable chelation and strong chemical interactions between the functional groups on the surface of the biosorbent and the metal ions. The addition of oxygen content after adsorption offers an interpretation that the rare-earth metal ions are chelated and incorporated most probably in the form of metal oxides. With such high adsorption capacity of La and Y ions, the durian rind sorbent could potentially be used to treat contaminated wastewater containing La and Y metal ions, as well as for separating and extracting rare-earth metal ions from crude minerals.
Torrefaction process of biomass material is essential in converting them into biofuel with improved calorific value and physical strength. However, the production of torrefied biomass is loose, powdery, and nonuniform. One method of upgrading this material to improve their handling and combustion properties is by densification into briquettes of higher density than the original bulk density of the material. The effects of critical parameters of briquetting process that includes the type of biomass material used for torrefaction and briquetting, densification temperature, and composition of binder for torrefied biomass are studied and characterized. Starch is used as a binder in the study. The results showed that the briquette of torrefied rubber seed kernel (RSK) is better than torrefied palm oil shell (POS) in both calorific value and compressive strength. The best quality of briquettes is yielded from torrefied RSK at the ambient temperature of briquetting process with the composition of 60% water and 5% binder. The maximum compressive load for the briquettes of torrefied RSK is 141 N and the calorific value is 16 MJ/kg. Based on the economic evaluation analysis, the return of investment (ROI) for the mass production of both RSK and POS briquettes is estimated in 2-year period and the annual profit after payback was approximately 107,428.6 USD.
The aim of this study was to optimize the different process parameters including pressure, temperature, and polymer concentration, to produce fine small spherical particles with a narrow particle size distribution using a supercritical antisolvent method for drug encapsulation. The interaction between different process parameters was also investigated.
High demand of semiconductor gas sensor works at low operating temperature to as low as 100 °C has led to the fabrication of gas sensor based on TiO₂ nanoparticles. A sensing film of gas sensor was prepared by mixing the sensing material, TiO₂ (P25) and glass powder, and B₂O₃ with organic binder. The sensing film was annealed at temperature of 500 °C in 30 min. The morphological and structural properties of the sensing film were characterized by field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDX) and X-ray diffraction (XRD). The gas sensor was exposed to hydrogen with concentration of 100⁻1000 ppm and was tested at different operating temperatures which are 100 °C, 200 °C, and 300 °C to find the optimum operating temperature for producing the highest sensitivity. The gas sensor exhibited p-type conductivity based on decreased current when exposed to hydrogen. The gas sensor showed capability in sensing low concentration of hydrogen to as low as 100 ppm at 100 °C.
This report shows a simple solution cast methodology to prepare plasticized polyvinyl alcohol (PVA)/methylcellulose (MC)-ammonium iodide (NH4I) electrolyte at room temperature. The maximum conducting membrane has a conductivity of 3.21 × 10-3 S/cm. It is shown that the number density, mobility and diffusion coefficient of ions are enhanced by increasing the glycerol. A number of electric and electrochemical properties of the electrolyte-impedance, dielectric properties, transference numbers, potential window, energy density, specific capacitance (Cs) and power density-were determined. From the determined electric and electrochemical properties, it is shown that PVA: MC-NH4I proton conducting polymer electrolyte (PE) is adequate for utilization in energy storage device (ESD). The decrease of charge transfer resistance with increasing plasticizer was observed from Bode plot. The analysis of dielectric properties has indicated that the plasticizer is a novel approach to increase the number of charge carriers. The electron and ion transference numbers were found. From the linear sweep voltammetry (LSV) response, the breakdown voltage of the electrolyte is determined. From Galvanostatic charge-discharge (GCD) measurement, the calculated Cs values are found to drop with increasing the number of cycles. The increment of internal resistance is shown by equivalent series resistance (ESR) plot. The energy and power density were studied over 250 cycles that results to the value of 5.38-3.59 Wh/kg and 757.58-347.22 W/kg, respectively.
Glomus tumors are rare benign tumors commonly occurring in the digits of the hand. Surprisingly, considering the fingertips are of a similar make-up to the toes, there have been few reports of glomus tumor in the toes. The present case highlights a glomus tumor observed in the right second toe of a 56-year-old Indian female who presented with the classical triad of spontaneous pain, cold hypersensitivity, and pressure tenderness. There was a delay in diagnosis for approximately 18 years by various general practitioners who were not aware of the rare presentation of the glomus tumor. The tumor, which measured 5 x 3 mm, was excised from the nail bed of the toe. Histopathological inspection confirmed the diagnosis of glomus tumor. We believe that reporting this rare case may make clinicians more aware of this unusual diagnosis.
Carbon from jatropha seed hull (JC) was prepared to study the adsorption of cadmium ions (Cd(2+)) from aqueous solutions under various experimental conditions. Batch equilibrium methods have been used to study the influences of the initial metal ion concentration (0.5-50 ppm), dosage (0.2-1 g), contact time (0-300 min), pH (2-7), and temperature (26-60 °C) on adsorption behavior. It has been found that the amount of cadmium adsorbed increases with the initial metal ion concentration, temperature, pH, contact time, and amount of adsorbent. A kinetic study proved that the mechanism of Cd(2+) adsorption on JC followed a three steps process, confirmed by an intraparticle diffusion model: rapid adsorption of metal ions, a transition phase, and nearly flat plateau section. The experimental results also showed that the Cd(2+) adsorption process followed pseudo-second-order kinetics. The Langmuir and Freundlich adsorption isotherm models were used to describe the experimental data, with the former exhibiting a better correlation coefficient than the latter (R² = 0.999). The monolayer adsorption capacity of JC has been compared with the capacities of the other reported agriculturally-based adsorbents. It has been clearly demonstrated that this agricultural waste generated by the biofuel industry can be considered a potential low-cost adsorbent for the removal of Cd(2+) from industrial effluents.
The crab carapace is a waste which cannot be decomposed. This waste was used to
remove the Reactive Orange 16 (RO16) and Basic Blue 3 (BB3) from aqueous solution
at different operational parameters such as pH, mass load, the concentrations of dye and
the temperature. The crab collected was modified to obtain quaternized crab (QC) using
(3-chloro-2-hydroxypropyl) trimethylammonium chloride solution (C6H15Cl2NO, 65% w/w
in water). The pH of the dyes solution was varied from pH 4 to 10. The highest adsorption
percentage was achieved at pH 7 for both dyes. Increasing the QC mass for the adsorption
process had granted an increase of dyes removal percentage. The highest adsorption
percentage was achieved at 91.00% for RO16 and 29.40% for BB3 dyes with 7.5 g/L QC
used. However, the adsorption capacity of QC decreased with higher QC mass because the
dye molecules occupied on the surface and prevented other molecules to diffuse into the
QC. At higher concentration beyond 20 mg/L and 10 mg/L of RO16 and BB3, respectively,
the maximum adsorption was achieved at 2.5362 mg/g and 0.6812 mg/g. The adsorption of
both dyes by QC was best fitted using Langmuir isotherm model, explaining the adsorption
mainly occurred as a single layer on the surface of QC. Comparison to the results obtained
from the kinetic models, the adsorption was
chemisorption in nature. According to the
thermodynamic studies, the adsorption of
RO16 was an exothermic, while BB3 was
an endorthermic process.
The paper examines the propagation direction and speed of large scale travelling ionospheric disturbances (LSTIDs) obtained from GPS observations of extreme geomagnetic storms during the 23rd solar cycle; these are the October 2003 and November 2003 geomagnetic storms. In the analysis, the time delay between total electron content (TEC) structures at Scott Base station (SBA) (Lat. –77.85º, Long. 166.76º), McMurdo (McM4), (Lat. –77.84º, Long. 166.95º), Davis (DAV1), (Lat. –68.58º, Long. 77.97º) and Casey station (CAS1) (Lat. –66.28º, Long. 110.52º) GPS stations as well as the distance between these stations were employed in the analysis. The measurements during the October 2003 storm showed obvious time delay between the TEC enhancement occurrences at SBA/MCM4, DAV1 and CAS1 stations. The time delay indicated a movement of the ionospheric structures from higher to lower latitudes in a velocity ranging between 0.8 km/s – 1.2 km/s. The first sudden TEC enhancement was observed at SBA/McM4 (Lat. –75.84º) followed by CAS1 station (Lat. –66.28º) and the final TEC enhancement was seen at DAV1 station (Lat. –68.58º) with TEC magnitude decreasing while moving from higher to lower latitudes. One important observation was that although the latitude of the CAS1 station was lower than the DAV1 station, the TEC enhancement was firstly seen at the CAS1 station due to the shorter distance between SBA and CAS1 compared with the distance between SBA and CAS1 of about 500 km. The TEC measurements during the November 2003 storm showed an opposite propagation direction (i.e. poleward direction from lower to higher latitudes) which was seen with a velocity ranging between 0.3 km/s – 0.4 km/s. As similar response was observed using vertical TEC measurements obtained from individual PRN satellites but with higher velocity ranges (1.2 km/s – 2.4 km/s during October
and 0.5 km/s – 0.7 km/s during November). The equatorward or poleward expansion of LSTIDs during the October and November 2003 storms was probably caused by the disturbances in the neutral temperature which occurred close to the dayside convection throat or due to the neutral wind oscillation induced by atmospheric gravity waves launched from the aurora region.
Breast cancer is considered as one of the most common cancers all over the world. A huge effort has been made to create a safe and cost effective breast cancer treatment. All of these features exist in the plants sources. In this study, the effect of local vegetable salad, Premna serratifolia (Bebuas) against MCF-7 cells (human breast adenocarcinoma) was determined. The optimum condition to extract breast cancer cytotoxic compound from the plant was investigated and the exact cytotoxic compound was identified as well. To determine the plant cytotoxicity effect against MCF-7 cells, MTT assay was used. Two important parameters in the sonication extraction method which are duration of time and temperature were optimized by carrying out a series of experiments which were designed by Face Centered Central Composite Design (FCCCD). The extraction efficiency of each experiment was determined by measuring the yield of extract and the half maximal inhibitory concentration (IC50) of the extract against MCF-7 cells. The results obtained from the experiments were fitted to the second order polynomial model to generate equation that was used to determine best extraction processing condition. Based on the generated equation, the best sonication processing condition to extract the cytotoxic compound is at 30oC for 67 min. Analysis of variance (ANOVA) showed that the duration of extraction time has great influence (p
Fish protein hydrolysate was recovered from tilapia by-product (TB) through enzymatic hydrolysis using alcalase enzyme. Hydrolysis reaction of TB was monitored according to the degree of hydrolysis (DH) by employing O-phtaldialdehyde (OPA) method. Optimization process for obtaining high yield of TB protein hydrolysate was performed using response surface methodology (RSM) by optimizing a combination of four independent variables namely, pH (6.5-8.5), temperature (55-70oC), substrate concentration (10-17.5% w/v), and enzyme concentration (1.5-3.5% w/w) with (DH) as a response. The optimum enzymatic hydrolysis conditions were obtained at pH 7.5, temperature of 60oC, substrate concentration of 15% (w/v) and 2.5% (w/w) of enzyme concentration and yielded about 20.20% of DH after hydrolyzing for 120 min. RSM generated model predicted that 20.42% of DH could be achieved at these conditions and this model was valid based on the DH value obtained from the experimental study (20.31%) which was quite similar with the predicted value. High yield of DH obtained from the optimization process could produce fish protein hydrolysate with good nutritional and functional properties.
In this study, we synthesized covalently functionalized graphene nanoplatelet (GNP) aqueous suspensions that are highly stable and environmentally friendly for use as coolants in heat transfer systems. We evaluated the heat transfer and hydrodynamic properties of these nano-coolants flowing through a horizontal stainless steel tube subjected to a uniform heat flux at its outer surface. The GNPs functionalized with clove buds using the one-pot technique. We characterized the clove-treated GNPs (CGNPs) using X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM). We then dispersed the CGNPs in distilled water at three particle concentrations (0.025, 0.075 and 0.1wt%) in order to prepare the CGNP-water nanofluids (nano-coolants). We used ultraviolet-visible (UV-vis) spectroscopy to examine the stability and solubility of the CGNPs in the distilled water. There is significant enhancement in thermo-physical properties of CGNPs nanofluids relative those for distilled water. We validated our experimental set-up by comparing the friction factor and Nusselt number for distilled water obtained from experiments with those determined from empirical correlations, indeed, our experimental set-up is reliable and produces results with reasonable accuracy. We conducted heat transfer experiments for the CGNP-water nano-coolants flowing through the horizontal heated tube in fully developed turbulent condition. Our results are indeed promising since there is a significant enhancement in the Nusselt number and convective heat transfer coefficient for the CGNP-water nanofluids, with only a negligible increase in the friction factor and pumping power. More importantly, we found that there is a significant increase in the performance index, which is a positive indicator that our nanofluids have potential to substitute conventional coolants in heat transfer systems because of their overall thermal performance and energy savings benefits.
Owing to its potential market value, the blue swimmer crab Portunus pelagicus is of great economic importance. The temperature of water significantly affects the physiological function and production efficiency of these crabs. The aim of the present study was therefore to examine the critical thermal minimum (CTMin), critical thermal maximum (CTMax), acclimation response ratio (ARR), escaping temperature (Tesc), and locomotor behavior of P. pelagicus instars at 20 °C, 24 °C, 28 °C, 32 °C, and 36 °C. The CTMax ranged from 39.05 °C to 44.38 °C, while the CTMin ranged from 13.05 °C to 19.30 °C, and both increased directly with temperature. The ARR ranged from 0.25 to 0.51. The movement of crabs (walking before molting) correlated positively with the acclimation temperature. These results indicate that the parameters evaluated varied with temperature. Furthermore, the high CTMax indicates the potential of this species to adapt to a wide range of temperatures. In addition, the implications of these findings for portunid crabs behavior and distribution in their natural habitat are also discussed.
This article investigated how crabs responded to different culture temperatures especially dislocation before molting using a combination of large recording files and computer software. In this novel approach of video recording portunid crab behavioral data, crab culture was recorded at five different acclimation temperatures of 20, 24, 28, 32 and 36 °C. Crabs were reared until the instar stage before being acclimatized for video recording. Large video files (MPEG-TS) were then analyzed using the latest version of Solomon Coder software developed by A. Peter and programmed with Embarcadero® Delphi® XE [1]. Recorded data was analyzed by calculating and marking movements of crabs using the time sequence tool. Additionally, a total movement was counted 30 min before crabs molted from instar stage 8 to instar stage 9. Part of the data is associated with the research article "Thermal tolerance and locomotor activity of blue swimmer crab Portunus pelagicus instar reared at different temperatures" (Azra et al., 2018) [2] and provided here as raw data of Supplementary materials.
This work aimed to develop a chiral separation method of ketoconazole enantiomers using electrokinetic chromatography. The separation was achieved using heptakis (2, 3, 6-tri-O-methyl)-β-cyclodextrin (TMβCD), a commonly used chiral selector (CS), as it is relatively inexpensive and has a low UV absorbance in addition to an anionic surfactant, sodium dodecyl sulfate (SDS). The influence of TMβCD concentration, phosphate buffer concentration, SDS concentration, buffer pH, and applied voltage were investigated. The optimum conditions for chiral separation of ketoconazole was achieved using 10 mM phosphate buffer at pH 2.5 containing 20 mM TMβCD, 5 mM SDS, and 1.0% (v/v) methanol with an applied voltage of 25 kV at 25 °C with a 5-s injection time (hydrodynamic injection). The four ketoconazole stereoisomers were successfully resolved for the first time within 17 min (total analysis time was 28 min including capillary conditioning). The migration time precision of this method was examined to give repeatability and reproducibility with RSDs ≤5.80% (n =3) and RSDs ≤8.88% (n =9), respectively.
A capillary electrophoretic method for the separation of the aminoglutethimide (AGT) enantiomers using methylated-beta-cyclodextrin (M-beta-CD) as chiral selector is described. Several parameters affecting the separation were studied, including the type and concentration of chiral selector, buffer pH, voltage and temperature. Good chiral separation of the racemic mixture was achieved in less than 9 min with resolution factor Rs=2.1, using a fused-silica capillary and a background electrolyte (BGE) of tris-phosphate buffer solution (50 mmol L(-1), pH 3.0) containing 30 mgm L(-1) of M-beta-CD. The separation was carried out in normal polarity mode at 25 degrees C, 16 kV and using hydrostatic injection. Acceptable validation criteria for selectivity, linearity, precision, and accuracy/recovery were included. The proposed method was successfully applied to the assay of AGT enantiomers in pharmaceutical formulations. The computational calculations for the inclusion complexes of the R- and S-AGT-M-beta-CD rationalized the reasons for the different migration times between the AGT enantiomers.