An orally-administered system for targeted, on-demand drug delivery to the gastrointestinal (GI) tract is highly desirable due to the high instances of diseases of that organ system and harsh mechanical and physical conditions any such system has to endure. To that end, we present an iron oxide nanoparticle/wax composite capsule coating using magnetic hyperthermia as a release trigger. The coating is synthesised using a simple dip-coating process from pharmaceutically approved materials using a gelatin drug capsule as a template. We show that the coating is impervious to chemical conditions within the GI tract and is completely melted within two minutes when exposed to an RF magnetic field under biologically-relevant conditions. The overall simplicity of action, durability and non-toxic and inexpensive nature of our system demonstrated herein are key for successful drug delivery systems.
Nasal injury following nasal surgery is an adverse consequence, and prompt treatment should be initiated. Nasal packing, either non-absorbable or absorbable, are commonly used after nasal surgery to prevent bleeding and promote wound healing. In the current study, a novel gelatine sponge crosslinked with genipin was evaluated for suitability to be used as nasal packing and compared to one of the frequently used commercial nasal packing made up of polyurethane. Gelatine at 7% and 10% (w/v) concentration were crosslinked with varying concentrations of genipin, 0.5%, 0.25%, and 0.2% (v/v). The gelatine sponges were further characterised by its water uptake ability, biodegradation, water vapour transmission rate, porosity, contact angle, chemical composition, crosslinking degree, and mechanical properties. The gelatine sponges absorbed five times more water than their dry weight and were degraded within five days. The water vapour transmission rate of the gelatine sponges was 1187.7 ± 430.2 g/(m-2 day) for 7% gelatine and 779.4 ± 375.5 g/(m-2 day) for 10% gelatine. Crosslinking of gelatine with genipin resulted in lower porosity and did not affect the wettability of gelatine sponge (contact angle: 95.3 ± 12.1° for 7% gelatine and 88.4 ± 7.2° for 10% gelatine). In terms of biodegradability, the gelatine sponges took 24-48 h to degrade completely. Genipin crosslinking improved the degradation resistance and mechanical strength of gelatine sponge. The physical and chemical properties of the gelatine sponge, i.e. biodegradability and mechanical durability, support its potential as nasal packing.
Chicken skin gelatin hydrolysates and peptides with angiotensin converting enzyme inhibitory (ACEI) activity were produced enzymatically using alcalase, pronase E, and collagenase before fractionation into
Introduction: Collagen and gelatin are essential protein in vertebrates and extensively used in various industries. Methods: In this study, acid-solubilized collagen and gelatin were extracted from the scales of three different species of freshwater fish namely Kelah (Tombroides), Tilapia (Oreochromis niloticus) and Snakehead fish (Channidae) and then further quantified using Bradford assay and separated by molecular weight using SDS-PAGE. Results: The extracted collagen in Tilapia fish scale was found to be the highest with 0.018 of protein absorbance among the other three fish; Kelah fish (0.017) and Snakehead fish (0.011). For gelatin, Snakehead fish scales showed the highest amount of total protein concentration followed by Tilapia and Kelah fish with 0.467, 0.144 and 0.037 μg/μL per g, respectively. Based on the SDS-PAGE results, collagen from all the three freshwater fishes were identified as a type 1 (molecular weight approximately from 95 to 130 kDa) collagen. As for gelatin, only gelatin from Snakehead fish scale was identified to be a type 1(molecular weight approximately from 95 to 130 kDa) while the other two freshwater fishes showed no clear band due to high viscosity of the gelatin produced. Conclusion: It can be said that the fishes investigated in this study have a potential to be the alternative source of collagen and gelatin.
The quality change of fish sausage (keropok lekor) coated in sago starch-gelatine coating with
papaya seed extract (PSE) during chill storage (7°C) was determined. During storage, pH,
thiobarbituric acid value (TBA), colour, moisture, and the total plate count were evaluated. pH
of samples significantly dropped (p < 0.05) during storage, and the highest decrease was in
control sample. The moisture content in control sample had an increasing trend while that of
samples with 5 and 7% PSE coatings significantly decreased, and only a slight change for
samples with 0% PSE coating. All samples had significant increase in their TBA values during
storage. The presence of the coating provided a positive effect on the colour of the fish sausages since no significant colour changes were observed during storage. TPC of control and
coated sausage in 0, 5, and 7% PSE exceeded the recommended microbial standard after 2, 6,
8, and 4 d of storage, respectively. Overall, coating with 5% of PSE was the most effective in
retarding the quality deterioration of the fish sausages.
Pencirian enzim ekstraselular protease daripada bakteria Alkalophilic Bacillus lehensis G1 dari Malaysia telah dikaji. Enzim protease yang dirembeskan diuji pada agar susu skim 2%. Keputusan menunjukkan protease ekstraselular mampu mengekalkan aktiviti sehingga suhu 60°C di dalam julat pH yang luas iaitu 3 hingga 11 dengan suhu optimum pada 40°C dan pH optimum pada 7.0. Aktiviti enzim juga diperhatikan akan meningkat dengan penambahan beberapa ion iaitu Mn2+, Fe2+, Cu2+, Mg2+ dan Co2+. Manakala aktiviti protease didapati sedikit direncat dengan kehadiran ion Ca2+, K+ dan Ni2+ dengan baki aktiviti sebanyak 85%, 81% dan 75%. Protease ekstraselular juga didapati serasi dengan beberapa cecair detergen komersial dari Malaysia, yang menunjukkan protease ini boleh dimanfaatkan sebagai pembersih kotoran pada pakaian. Selain itu, potensi kegunaan protease yang dihasilkan oleh B. lehensis G1 ke atas penguraian gelatin dari filem X-ray yang telah digunakan juga telah dilakukan di dalam kajian ini.
Gelatin is a very popular pharmaceutical and food ingredient and the most studied ingredient in Halal researches. Interest in source gelatin authentication is based on religious and cultural beliefs, food fraud prevention and health issues. Seven gelatin authentication methods that have been developed include: nucleic acid based, immunochemical, electrophoretic analysis, spectroscopic, mass-spectrometric, chromatographic-chemometric and chemisorption methods. These methods are time consuming, and require capital intensive equipment with huge running cost. Reliability of gelatin authentication methods is challenged mostly by transformation of gelatin during processing and close similarities among gelatin structures. This review concisely presents findings and challenges in this research area and suggests needs for more researches on development of rapid authentication method and process-transformed gelatins.
The ability to compare bovine and porcine skin gelatin based on their amino acid composition, polypeptides pattern, bloom strength, turbidity and foaming properties were investigated. Amino acid composition of both gelatin showed that the content of glycine, proline and arginine in porcine gelatin were higher than bovine gelatin. However, the polypeptides pattern between both gelatin is closely similar. The bloom strength of porcine gelatin was higher than bovine gelatin from pH 3 to pH 10. Both gelatin possessed highest bloom strength at pH 9. The lowest bloom strength of bovine gelatin was at pH 3 while porcine gelatin at pH 5. The highest turbidity of bovine gelatin obtained at pH 7 while porcine gelatin at pH 9. Foam expansion and foam stability of bovine gelatin were higher than porcine gelatin at all concentrations.
The extraction of catfish (Clarias gariepinus) bone gelatin was optimized by using Response Surface Methodology (RSM) involving 4-factors, 5-levels Central Composite Design (CCD). The optimum conditions for extraction were produced by a pre-treatment of 3.35% HCl for 14.5 h along with hot water extraction at 67.23°C for 5.2 h. Results showed that the predicted yield by RSM (61.81%) was closely matched the experimental yield of 60.54%. The results also indicated that the extracted bone gelatin possessed high protein content (81.75%) and imino acid (proline and hydroxyproline) (144 residues per 1000 residues), with gel strength (230.25 g), viscosity (4.64 mPa.s) and isoionic point (5.35) comparable to that of bovine gelatin. The results suggested that RSM is a great optimizing tool for extraction of gelatin from clarias catfish bone and values of the physicochemical properties of gelatin are higher or comparable than those from other fish species and bovine gelatin.
The aims of this study were to examine the effect of salts (CaCl2, CaSO4 and MgSO4) on the rheological and thermal properties of gelatin extracted from the skins of tropical fishes, sin croaker (Johnius dussumeiri) and shortfin scad (Decapterus macrosoma). It was found that the melting temperatures of fish skin gelatins were increased by 1.5 times as compared to bovine gelatin which was only increased by 0.5 times after holding for 2 h at 5°C. The storage (G’) and loss (G”) modulus of fish skin gelatins were improved with the addition of calcium sulphate (CaSO4) and magnesium sulphate (MgSO4), respectively. However, the storage (G’) and loss (G”) modulus of gelatin solutions were decreased with the addition of calcium chloride (CaCl2). Magnesium sulphate (MgSO4) was found to be an effective salt to improve the bloom value, elastic and viscous moduli of the fish skin gelatin. This study showed that shortfin scad skin gelatin with salt addition possessed better thermal and rheological properties than sin croaker gelatin.
The native sago starch exists as a compact crystalline structure and is not efficiently hydrolyzed by Raw Starch Degrading Enzyme (RSDE). In order to enhance its hydrolysability, the starch was treated with acid and heated below its gelatinization temperature, thus increasing the accessibility of the sago starch granule to enzymatic attack. Results showed that treatment of sago starch with acid at pH 2.0 and temperature 65oC for 2 hours greatly enhanced its conversion rate to glucose from 53.3% to 71.9%. It is clearly shown that high yield of glucose is produced during hydrolysis of acid-treated sago starch using the Raw Starch Degrading Enzyme from Acremonium sp. The difference between the acid-treated and untreated sago starch in this study could be due to the differences on the surface of the sago starch granule which may influence the accessibility and diffusion of enzyme into the starch during hydrolysis.
This study reported the extraction optimization and characterization of cobia (Rachycentron canadum) skin gelatin. Optimization study was carried out to determine the effect of CH3COOH concentration, skin to water ratio, extraction temperature and extraction time on gelatin yield (GY) and gel strength (GS) using Response Surface Methodology (RSM). The optimum conditions were 0.15mol/L for CH3COOH concentration, 82.4oC of extraction temperature, 6 h of extraction time and 1:6 of skin to water ratio, which produced cobia gelatin with GY of 20.10% and GS of 205.6 g. Characteristics of cobia skin gelatin (CG) were then compared to that of commercial bovine gelatin (BG). It was found that the most dominant amino acid in CG was glycine, proline and alanine. There was no difference in foaming and emulsifying properties of CG and BG at 1% concentration, but at 2% and 3% concentration, BG performed better. CG was found to have higher fat binding capacity but lower water holding capacity than BG. Least gelling concentration for CG was recorded at 2% while for BG at 1%. CG and BG had a pI at pH 6.05 and 4.82, respectively. This study shows that cobia skin gelatin has potential as halal alternative to bovine gelatin in food industry.
This study examines and compares the influence of pH on the functional, rheological and structural properties of eel skin (Monopterus sp.) and bovine gelatins. Functional properties studied and compared were emulsifying capacity and stability; water holding capacity; fat binding capacity; foaming capacity; and foaming stability. The rheological properties studied include gel strength and dynamic oscillatory measurements. The structural properties of eel skin and bovine gelatin were determined by Fourier transform infrared spectroscopy (FTIR). Results obtained showed that eel skin gelatin treated at pH 8 (compared to pH 5) exhibited the higher emulsifying, fat binding, foaming and viscoelasticity properties. The FTIR spectrum assay showed that eel skin gelatin presented a similar structure to that of bovine gelatin. This study demonstrated that pH levels influence functional, rheological and structural properties of eel skin gelatin and that these properties were enhanced to either equal or surpass those of bovine gelatin. Hence, this study indicates that eel skin gelatin has immense potential for use as an alternative to bovine gelatin.
The objectives of this study were to develop composite films using various gelatin sources with corn oil (CO) incorporation (55.18%) and to investigate the mechanical and physical properties of these films as potential packaging films. There were increases (p < 0.05) in the tensile strength (TS) and puncture strength (PS) of films when the concentration of gelatin increased. The mechanical properties of these films were also improved when compared with films produced without CO. Conversely, the water barrier properties of composite films decreased (p < 0.05) when the concentration of gelatin in composite films increased. Comparing with pure gelatin films, water and oxygen barrier properties of gelatin films decreased when manufactured with the inclusion of CO.
This study examined the physicochemical properties of rice flours with five different particle sizes (≤63, 80, 100, 125, and 140 μm) prepared by dry milling and their effects on textural properties of laksa noodles. Rice flour with the smallest particle size had the highest water absorption index, peak viscosity, hot paste viscosity, breakdown, final or cold paste viscosity and gel hardness, but the lowest gelatinization temperature. Reduction of rice flour particle size improved textural properties of laksa noodle. Laksa noodle produced from rice flour with the smallest particle size had the best textural properties.
Data in this article are supplementary to the corresponding research article [1]. Morphological features of homogeneous and graded nanofibrous electrospun gelatin scaffolds were observed using scanning electron microscopy. Microstructural properties including fiber diameter and pore size were determined via image analysis, using ImageJ. Uniaxial tensile and fracture tests were performed on both homogeneous and graded scaffolds using a universal testing machine. Stress-strain curves of all scaffolds are presented. Computing software, MATLAB, was used to design fibrous networks with thickness-dependent density and alignment gradients (DAG). Finite element analysis software, Abaqus, was used to determine the effect of the number of layers on the fracture properties of DAG multilayer scaffolds.
Enzymatic hydrolysis of proteins is an important bioprocess method to prepare bioactive peptides with many functionality and health benefits. The aims of the present work were to prepare and determine the physicochemical characteristics of gelatine hydrolysate from skin of shortfin scad (SSGH) via hydrolysis using alcalase. Analyses on chemical composition, molecular weight by SDS PAGE, protein concentration, amino acid composition, Fourier Transform Infrared Spectroscopic features, and solubility of SSGH were thus performed. The yield of SSGH obtained was 51.01% (d.b.). The chemical compositions of SSGH for moisture, protein, fat, and ash were 13.82%, 90.05%, 1.95%, and 12.48%, respectively. SSGH showed low molecular weight (
Malaysia is a surplus poultry producing country with well-established commercial slaughtering and processing plants. Immense quantity of heads, feet, viscera, blood and feathers are usually discarded and not optimally utilized. Chicken heads are rich in protein, and could be a potential source of gelatin. The aim of the present work was therefore to find a simpler, faster, cheaper and greener gelatin extraction technology as compared to current available methods of gelatin extraction from poultry heads. A comparison of three different gelatin extraction methods with alkaline-acid pretreatment (E1), single acid pretreatment (E2) and single alkaline pretreatment (E3) were studied to extract gelatin from chicken heads. E1 and E2 produced gelatins of Type A, while E3 produced gelatin of Type B. High bloom gelatin (>300 g) with
The aim of this study is to investigate the functional and antioxidant properties of chicken skin gelatin hydrolysate (CSGH) as affected by the drying method used in the preparation of gelatin (freeze-dried and vacuum dried). CSGH obtained from freeze-dried gelatin showed better functional properties such as emulsifying activity index (EAI), water holding and oil binding capacity at different pH compared to CSGH produced from vacuum dried gelatin. Meanwhile, the CSGH of the vacuum dried gelatin exhibited a better emulsifying stability index (ESI), foaming capacity and stability. CSGH from freeze-dried gelatin showed better antioxidant, DPPH radical scavenging and metal chelating activity.
Dough mixing and thermal properties including the pasting profiles of various commercial wheat flour (WF)-banana pseudostem flour (BP)-hydrocolloid blends were determined using a farinograph, differential scanning calorimetry (DSC) and a rapid-visco analyser (RVA). The prepared blends were WF, WF substituted with 10% BP (10BP) and 10BP with added 0.8% w/w (flour weight basis) xanthan gum (XG) or sodium carboxymethylcellulose (CMC) (10BPX and 10BPC, respectively). The dough of 10BP and the doughs containing XG or CMC reduced stability and breakdown time compared with the WF dough. All dough containing BP demonstrated greater water absorption and mixing tolerance index values than the WF dough. The substitution of 10% BP into WF and the addition of hydrocolloids did not significantly affect the conclusion temperature (Tc) of the mixture, but did increased the onset temperature (To), peak temperature (Tp) and decreased the gelatinisation enthalpy change (ΔHg) of the blends. Samples of 10BP, 10BPX and 10BPC significantly decreased (p