MyMedR

Displaying publications 81 - 100 of 449 in total

Abstract:

Sort:

Cassava/sugar palm fiber reinforced cassava starch hybrid composites: Physical, thermal and structural properties

Edhirej A, Sapuan SM, Jawaid M, Zahari NI

Int J Biol Macromol, 2017 Aug;101:75-83.
PMID: 28288881 DOI: 10.1016/j.ijbiomac.2017.03.045

A hybrid composite was prepared from cassava bagasse (CB) and sugar palm fiber (SPF) using casting technique with cassava starch (CS) as matrix and fructose as a plasticizer. Different loadings of SPF (2, 4, 6 and 8% w/w of dry starch) were added to the CS/CB composite film containing 6% CB. The addition of SPF significantly influenced the physical properties. It increased the thickness while decreasing the density, water content, water solubility and water absorption. However, no significant effect was noticed on the thermal properties of the hybrid composite film. The incorporation of SPF increased the relative crystallinity up to 47%, compared to 32% of the CS film. SEM micrographs indicated that the filler was incorporated in the matrix. The film with a higher concentration of SPF (CS-CB/SPF8) showed a more heterogeneous surface. It could be concluded that the incorporation of SPF led to changes in cassava starch film properties, potentially affecting the film performances.

Matched MeSH terms: Solubility
Fulltext Preparation and characterization of carboxylic-functionalized multi-walled carbon nanotubes

Zakiyah, L.K., Gui, M.M., Foo, R.S., Mohamed, A.R., Chai, S.P.

ASM Science Journal, 2011;5(2):91-100.
MyJurnal

The functionalization of pristine CNTs is necessary for carbon nanotubes (CNTs) to be fully utilized, with the aim of increasing the nanotube reactivity and solubility in aqueous solutions. In this study, multi-walled carbon nanotubes (MWCNTs) were functionalized with a carboxylic group as this was an important step prior to application. The carboxylic group-functionalization was conducted through acid treatment, using sulphuric and nitric acids mixed at a ratio of 3:1 (v/v) and sonication for 30 min under different temperatures and time durations. The functionalization conditions of 50ºC x 5 h and 60ºC x 3 h were identified to be most suitable for introducing a carboxylic group onto the nanotube surfaces. The percentage of total weight loss due to the carboxylic group on the MWCNTs treated at 50ºC x 5 h and 60ºC x 3 h obtained from the thermogravimetric analysis was 13.26% and 13.76%, respectively. For both samples, peaks corresponding to the carboxylic group were identified in the FT-IR spectra. The changes in the morphology of the treated MWCNTs were also observed under SEM analysis.

Matched MeSH terms: Solubility
Fulltext Ionic conductivity studies on magnesium-based cellulose acetate polymer gel electrolytes

Aniza Omar, Ainnur Sherene Kamisan, Muhd Zu Azhan bin Yahya, Siti Zafirah Zainal Abidin, Ab Malik Marwan Ali, Siti Irma Yuana Saaid

Scientific Research Journal, 2015;12(2):0-0.
MyJurnal

Magnesium-based polymer gel electrolytes consist of magnesium triflate (MgTf) salt, a mixture of ethylene carbonate (EC) and diethyl carbonate (DEC) solvents as well as cellulose acetate as a polymeric agent were prepared via direct dissolution method. The highest ionic conductivity obtained for MgTf-EC:DEC(1:1) liquid electrolytes was 2.66 x 10-3 S cm-1 and enhanced to 2.73 x 10-3 S cm-1 with the addition of cellulose acetate. These results were in agreement with the activation energy obtained with the lowest value of 0.11. The best explanation on the enhancement in ionic conductivity of PGE is due to the “breathing polymeric chain model”. The plots of conductivity-temperature shown to obey an Arrhenius rule. The electrical properties of the sample with the highest conductivity were analyzed using electrical permittivity-based frequency and temperature dependence in the range of 100 Hz - 1 MHz and 303-373K, respectively. The variation in dielectric permittivity (εr and εi) as a function of frequency at different temperatures exhibited decays at higher frequencies and a dispersive behavior at low frequencies. Based on the observed electrical properties, it can be inferred that this polymer gel electrolyte could be a promising candidate as an electrolyte in electrochemical devices.

Matched MeSH terms: Solubility
Fulltext Properties of collagen from barramundi (Lates calcarifer) skin

Jamilah, B., Umi Hartina, M.R., Mat Hashim, D., Sazili, A.Q.

International Food Research Journal, 2013;20(2):835-842.
MyJurnal

The properties of collagens from Barramundi (Lates calcarifer) skin obtained by acid solubilized (control), pepsin and papain aided extractions were investigated. The yields of collagens (dry weight basis) for acid solubilized, pepsin and papain aided extractions were 8.1, 43.6 and 44.0%, respectively. The collagens were generally colorless although collagens from the enzymes aided-extractions were slightly darker. Based on the e-nose evaluation, the collagens were considered odorless. The pH of all the collagens was in the vicinity of 3; however, those extracted with papain had significantly higher pH. The polypeptide profiles obtained in the SDS-PAGE analysis for pepsin extracted collagen were similar to those of acid solubilized collagens. Papain extracted collagen had distinctly different SDS-PAGE pattern. All the extracted collagens were of type 1 with apparent peptides molecular weight distribution of 37 to 250 kDalton. They had high solubility in pH 2 to 5 and increasing NaCl concentration up to 6%.

Matched MeSH terms: Solubility
Fulltext Effects of degree of hydrolysis on physicochemical properties of cobia (Rachycentron canadum) frame hydrolysate

Amiza, M.A., Kong, Y.L., Faazaz, A.L.

International Food Research Journal, 2012;19(1):199-206.
MyJurnal

The effect of degree of hydrolysis (DH) on the physicochemical properties of cobia frame hydrolysate was determined. Three levels of degree of hydrolysis of cobia frame hydrolysate were studied, which were 53%, 71% and 96%. After enzymatic hydrolysis using Alcalase®, the samples were spray-dried. Cobia hydrolysate powder samples were analyzed for their proximate analysis and physicochemical properties. The proximate analysis showed significant differences in fat and ash content only. DH96 hydrolysate showed desirable essential amino acid profile for human requirement except for methionine and isoleucine. The study found that cobia frame hydrolysate had good colour, emulsifying capacity and excellent foaming properties. However, there were no significant differences in water-holding capacity, oil-holding capacity and peptide solubility among the hydrolysate samples. This study suggested that cobia frame hydrolysate is a potential ingredient and foaming agent for food industry.

Matched MeSH terms: Solubility
Fulltext Functional and antioxidant properties of angelwing clam (Pholas orientalis) hydrolysate produced using alcalase

Normah Ismail, Juliana Mahmod, Awatif Khairul Fatihin Mustafa Kamal

Scientific Research Journal, 2014;11(1):0-0.
MyJurnal

In this study, Hydrolysate from angelwing clam (Pholas orientalis) was produced at 0, 1, 2 and 3 hrs and E/S ratio of 0.5 and 3% using alcalase where the pH and temperature were kept constant at pH 8.5 and 60°C, respectively. The hydrolysates were analysed for antioxidant and functional properties such as solubility, emulsifying properties and water and oil holding capacity. Degree of hydrolysis (DH), yield, functional and antioxidant properties were influenced by the hydrolysis time and E/S ratio. Higher enzyme concentration (E/S 3%) and longer hydrolysis time increased the DH. Yield was higher at E/S 3% but reduced with hydrolysis time. Longer hydrolysis time produced more soluble hydrolysate and higher metal chelating activity but lower in emulsifying properties and DPPH activity. Higher enzyme concentration resulted in increase only in solubility and metal chelating activity. This study revealed that enzymatic hydrolysis using alcalase should be performed at shorter hydrolysis time using intermediate concentration of enzyme (E/S between 0.5 to 3%) in order to produce angelwing clam hydrolysate with collectively good functional and antioxidant properties

Matched MeSH terms: Solubility
Fulltext Effect of extrusion barrel temperatures on residence time and physical properties of various flour extrudates

Sue Shan, L., Sulaiman, R., Sanny, M., Nur Hanani, Z.A.

International Food Research Journal, 2015;22(3):965-972.
MyJurnal

The aim of this study was to evaluate the effect of barrel temperature and flour types on the residence time and physical properties of various flour extrudates. Corn flour, rice flour, corn flour with potato starch (30% w/w, d.b), and rice flour with potato starch (30%w/w, d.b) were extruded at screw speed of 75rpm, feed moisture at 25% (w/w, w.b.), barrel temperature ranging from 80°C to 140°C and die size of 1.88mm. The extrudates were dried at 50°C overnight and further analysed. Results showed that an increase in extruder barrel temperature decreased the residence time of the flours in the extruder (from 4.11-11.32min to 2.24-6.76min), but increased the expansion ratio, rehydration ratio, water absorption index, water solubility index and b value of the extrudate (p≤0.05). The extrudates had the mean residence time and physical properties of rice flour

Matched MeSH terms: Solubility
Fulltext Physico-chemical properties of spray-dried red pitaya (Hylocereus polyrhizus) peel powder during storage

Ee, S.C., Bakar, J., Kharidah, M., Dzulkifly, M.H., Noranizan, A.

International Food Research Journal, 2014;21(3):1213-1218.
MyJurnal

The physico-chemical properties of spray-dried pitaya peel powders kept at accelerated (45 ± 2°C) and room temperature (28 ± 2°C) for 14 weeks and 6 months, respectively were evaluated. Changes in physico-chemical properties of the peel powder were used as indicators of stability, while changes of the betacyanin pigment retention was used to calculate the shelf-life of the powder. Storage temperatures significantly (p < 0.05) affected all the studied parameters and Hunter a value had the most significant change. The pigment retention of peel powder was approximately 87% at 45°C and 89% at room temperature storage. Degradation of betacyanin pigment in the powder followed the first order reaction kinetics with the half-life (t1/2) of approximately 76 weeks at 45°C and 38 months at 28°C. The spray-dried pitaya peel powder had a solubility of 87 to 92% and low in powder hygroscopicity. The final Aw of the powder did not exceed 0.6 for both storage temperatures.

Matched MeSH terms: Solubility
Fulltext Production of spray-dried honey jackfruit (Artocarpus heterophyllus) powder from enzymatic liquefied puree

Wong CW, Tan HH

J Food Sci Technol, 2017 Feb;54(2):564-571.
PMID: 28242955 DOI: 10.1007/s13197-017-2501-3

This paper presents the enzymatic liquefaction process for honey jackfruit optimized with Pectinex® Ultra SP-L and Celluclast® 1.5 L individually or in combinations at different concentrations (0-2.5% v/w) and incubation time (0-2.5 h). Treatment with combinations of enzymes showed a greater effect in the reduction of viscosity (83.9-98.8%) as compared to single enzyme treatment (64.8-87.3%). The best parameter for enzymatic liquefaction was obtained with 1.0% (v/w) Pectinex® Ultra SP-L and 0.5% (v/w) Celluclast® 1.5 L for 1.5 h. Spray drying process was carried out using different inlet temperatures (140-180 °C) and maltodextrin concentrations (10-30% w/w). Results indicated that the spray-dried honey jackfruit powder produced at 160 °C with 30% w/w maltodextrin gave the highest product yield (66.90%) with good powder qualities in terms of water activity, solubility, moisture content, hygroscopicity, color and bulk density. The spray-dried honey jackfruit powder could potentially be incorporated into various food products.

Matched MeSH terms: Solubility
Fulltext The Effects of Various Concentrations of NaOH on the Inter-Particle Gelation of a Fly Ash Geopolymer Aggregate

Abdullah A, Hussin K, Abdullah MMAB, Yahya Z, Sochacki W, Razak RA, et al.

Materials (Basel), 2021 Feb 27;14(5).
PMID: 33673522 DOI: 10.3390/ma14051111

Aggregates can be categorized into natural and artificial aggregates. Preserving natural resources is crucial to ensuring the constant supply of natural aggregates. In order to preserve these natural resources, the production of artificial aggregates is beginning to gain the attention of researchers worldwide. One of the methods involves using geopolymer technology. On this basis, this current research focuses on the inter-particle effect on the properties of fly ash geopolymer aggregates with different molarities of sodium hydroxide (NaOH). The effects of synthesis parameters (6, 8, 10, 12, and 14 M) on the mechanical and microstructural properties of the fly ash geopolymer aggregate were studied. The fly ash geopolymer aggregate was palletized manually by using a hand to form a sphere-shaped aggregate where the ratio of NaOH/Na2SiO3 used was constant at 2.5. The results indicated that the NaOH molarity has a significant effect on the impact strength of a fly ash geopolymer aggregate. The highest aggregate impact value (AIV) was obtained for samples with 6 M NaOH molarity (26.95%), indicating the lowest strength among other molarities studied and the lowest density of 2150 kg/m3. The low concentration of sodium hydroxide in the alkali activator solution resulted in the dissolution of fly ash being limited; thus, the inter-particle volume cannot be fully filled by the precipitated gels.

Matched MeSH terms: Solubility
Fulltext Production of chitosan oligosaccharides using β-glycosidic degrading enzyme: optimization using response surface methodology

Yusof Nurhayati, Abdul Manaf Ali

Malaysian Journal of Applied Sciences, 2020;5(2):30-44.
MyJurnal

Many researchers have focused chitosan as a source of potential bioactive material during the past few decades. However, chitosan has several drawbacks to be utilised in biological applications, including poor solubility under physiological conditions. Therefore, a new interest has recently emerged on partially hydrolysed chitosan, chitosan oligosaccharides (COS). In this study, degradation of chitosan was performed by Cellulase from Trichoderma reesei® 1.5L and Response Surface Methodology (RSM) were employed to optimize the hydrolysis temperature, pH, enzyme concentration and substrate concentration. Optimization of cellulase T. reesei® using central composite design (CCD) was to obtain optimum parameters and all the factors showed significant effects (p˂0.05). The maximum response, Celluclast® activity (1.268 U) was obtained by assaying the process at 49.79oC, pH 4.5, 3% (v/w) of enzyme concentration and 25% (w/v) concentration of chitosan for 24 hours.

Matched MeSH terms: Solubility
Fulltext Optimization of spray drying parameters for white dragon fruit (Hylocereus undatus) juice powder using response surface methodology (rsm)

Norzaida Yusof, Noranizan Mohd Adzahan, Kharidah Muhammad

Malaysian Journal of Applied Sciences, 2020;5(2):45-56.
MyJurnal

This study was conducted to optimize the production of spray-dried white dragon fruit (Hylocereus undatus) powder using resistant maltodextrin as wall material. The inlet air temperature (140 °C, 150 °C and 160 °C), outlet temperature (75 °C, 80 °C and 85 °C) and resistant maltodextrin concentrations (20%, 25% and 30%) were tested as independent variables. Process yield, moisture content, water activity, solubility, hygroscopicity and bulk density of the powders were analysed as responses. Process yield significantly (p

Matched MeSH terms: Solubility
Enzymatic hydrolysis: Sialylated mucin (SiaMuc) glycoprotein of edible swiftlet's nest (ESN) and its molecular weight distribution as bioactive ESN SiaMuc-glycopeptide hydrolysate

Hui Yan T, Lim SJ, Babji AS, Rawi MH, Sarbini SR

Int J Biol Macromol, 2021 Apr 01;175:422-431.
PMID: 33561458 DOI: 10.1016/j.ijbiomac.2021.02.007

Bioactive edible swiftlet's nest (ESN) sialylated-mucin (SiaMuc) hydrolysate is produced by alcalase hydrolysis. Enzymatic hydrolysis of ESN breakdown high-valued ESN SiaMuc-glycoprotein into bioactive SiaMuc-glycopeptide. This is a breakthrough for the issue of insolubility and low extraction rate in ESN, and even increases the bioavailability of ESN nutritional functionality and health benefits. Hydrolysis of ESN SiaMuc-glycoprotein was performed for 1 to 4 h and its effect on physicochemical properties, molecular weight (MW) distribution, SiaMuc-glycoprotein and glycopeptide integrity were determined. Other than improvement in solubility and bioavailability as SiaMuc-glycopeptide, results from SDS-PAGE revealed that MW of SiaMuc-glycoprotein decreased from 42.0-148.8 kDa to 17.7-142.7 kDa with increasing hydrolysis period. Further hydrolysis from maximized DH (90 min) showed an insignificant effect on the MW of ESN SiaMuc-glycopeptide and remained constant at 15.2 kDa. This highlights that enzymatic hydrolysis only influences macro SiaMuc-glycoprotein fractions (142.7, 115.3 and 102.7 kDa), while the majority of SiaMuc-glycopeptide fractions from 36.6-98.6 kDa remained intact. Conclusively, alcalase hydrolysis of ESN showed high recovery in the form of bioactive ESN SiaMuc-glycopeptide. Therefore, enzymatic biotechnology is an economic alternative applicable on ESN that broaden industrial utilization by reducing the MW without destroying the quality of bioactive SiaMuc-glycoprotein.

Matched MeSH terms: Solubility
Methotrexate-based ionic liquid as a potent anticancer drug for oral delivery: In vivo pharmacokinetics, biodistribution, and antitumor efficacy

Moshikur RM, Ali MK, Wakabayashi R, Moniruzzaman M, Goto M

Int J Pharm, 2021 Oct 25;608:121129.
PMID: 34562557 DOI: 10.1016/j.ijpharm.2021.121129

Oral delivery of the sparingly soluble drug methotrexate (MTX) is challenging owing to its poor bioavailability and low solubility. To address this challenge, the present study reports the conversion of MTX into a series of five ionic liquids (ILs) comprising a cationic component-i.e., cholinium (Cho), tetramethylammonium (TMA), tetrabutylphosphonium (TBP), or an amino acid ester-and an anionic component-i.e., MTX. The biocompatibility, pharmacokinetics, tissue distribution, and antitumor efficacy of each MTX-based IL were investigated to determine its usefulness as a pharmaceutical. Oral administration to mice revealed that proline ethyl ester MTX (IL[ProEt][MTX]) had 4.6-fold higher oral bioavailability than MTX sodium, followed by aspartic diethyl ester MTX, IL[TBP][MTX], IL[Cho][MTX], and IL[TMA][MTX]. The peak plasma concentration, elimination half-life, area under the plasma concentration, mean absorption time, and body clearance of IL[ProEt][MTX] were significantly (p

Matched MeSH terms: Solubility
Fulltext Release Mechanisms and Kinetic Models of Gypsum-Sulfur-Zeolite-Coated Urea Sealed with Microcrystalline Wax for Regulated Dissolution

Eghbali Babadi F, Yunus R, Masoudi Soltani S, Shotipruk A

ACS Omega, 2021 May 04;6(17):11144-11154.
PMID: 34056270 DOI: 10.1021/acsomega.0c04353

In this study, a mineral-based coated urea was fabricated in a rotary pan coater using a mixture of gypsum/sulfur/zeolite (G25S25Z50) as an effective and low-cost coating material. The effects of different coating compositions on the dissolution rate of urea and the crushing strength and morphology of the coated urea were investigated. A 25:25:50 (wt %) mixture of gypsum/sulfur/zeolite (G25S25Z50) increased the coating effectiveness to 34.1% with the highest crushing strength (31.06 N). The effectiveness of coated urea was further improved to 46.6% with the addition of a microcrystalline wax (3%) as a sealant. Furthermore, the release mechanisms of various urea fertilizers were determined by fitting the release profiles with six mathematical models, namely, the zeroth-order, first-order, second-order, Higuchi, Ritger & Peppas, and Kopcha models. The results showed that the release mechanism of the uncoated urea and all other coated urea followed the Ritger & Peppas model, suggesting the diffusional release from nonswellable delivery systems. In addition, due to the increased mass-transfer resistance, the kinetic constant was decreased from 0.2233 for uncoated urea to 0.1338 for G25S25Z50-coated urea and was further decreased to 0.0985 when 3% Witcovar 146 sealant was applied.

Matched MeSH terms: Solubility
Investigation of the Effects of Excipients in the Compounding of Amlodipine Besylate Orally Disintegrating Tablets

Azmi NHS, Ming LC, Uddin ABMH, Sarker ZI, Bin LK

Int J Pharm Compd, 2022 1 27;26(1):80-87.
PMID: 35081048

Oral drug delivery has been recognized as the most desirable drug administration method among other drug delivery routes due to its ease of administration, long shelf life, and low cost. Orally disintegrating tablets disintegrate within seconds in the mouth without the need of water for swallowing. This unique feature of orally disintegrating tablets is favorable to special populations such as geriatric and pediatric patients. Formulation optimization is significant to obtain the optimal combination of tablet constituents, as the tablet composition is influential on dosage-form characteristics. The objective of this study was to investigate the effect of different types of fillers and percentage on the physical properties of orally disintegrating tablets by using amlodipine as the model drug. Blank orally disintegrating tablets containing different fillers, namely, Sorbolac 400, Granulac 200, and CombiLac with different percentages, were prepared using the wet granulation method and were evaluated based on weight variation, hardness, thickness, friability, and disintegration time. Formulation 5 that consists of 25% Granulac 200 showed the optimal result among all formulations with the fastest disintegration time (96.17 s Å} 18.40) and sufficient tablet hardness (4.59 kg Å} 0.70). Hence, formulation 5 was selected as the optimal formulation and incorporated with amlodipine. From this study, it can be concluded that excipients have an essential role in determining the physical properties of orally disintegrating tablets.

Matched MeSH terms: Solubility
Crystal modifications and dissolution rate of piroxicam

Lyn LY, Sze HW, Rajendran A, Adinarayana G, Dua K, Garg S

Acta Pharm, 2011 Dec;61(4):391-402.
PMID: 22202198 DOI: 10.2478/v10007-011-0037-z

Piroxicam is a nonsteroidal anti-inflammatory drug with low aqueous solubility which exhibits polymorphism. The present study was carried out to develop polymorphs of piroxicam with enhanced solubility and dissolution rate by the crystal modification technique using different solvent mixtures prepared with PEG 4000 and PVP K30. Physicochemical characteristics of the modified crystal forms of piroxicam were investigated by X-ray powder diffractometry, FT-IR spectrophotometry and differential scanning calorimetry. Dissolution and solubility profiles of each modified crystal form were studied and compared with pure piroxicam. Solvent evaporation method (method I) produced both needle and cubic shaped crystals. Slow crystallization from ethanol with addition of PEG 4000 or PVP K30 at room temperature (method II) produced cubic crystal forms. Needle forms produced by method I improved dissolution but not solubility. Cubic crystals produced by method I had a dissolution profile similar to that of untreated piroxicam but showed better solubility than untreated piroxicam. Cubic shaped crystals produced by method II showed improved dissolution, without a significant change in solubility. Based on the XRPD results, modified piroxicam crystals obtained by method I from acetone/benzene were cube shaped, which correlates well with the FTIR spectrum; modified needle forms obtained from ethanol/methanol and ethanol/acetone showed a slight shift of FTIR peak that may be attributed to differences in the internal structure or conformation.

Matched MeSH terms: Solubility
Development and evaluation of omeprazole pellets fabricated by sieving-spheronization and extrusion - spheronization process

Karim S, Baie SH, Hay YK, Bukhari NI

Pak J Pharm Sci, 2014 May;27(3):425-38.
PMID: 24811797

Pelletized dosage forms can be prepared by different methods which, in general, are time consuming and labor intensive. The current study was carried out to investigate the feasibility of preparing the spherical pellets of omeprazole by sieving-spheronization. An optimized formulation was also prepared by extrusion-spheronization process to compare the physical parameters between these two methods. The omeprazole pellets were consisted of microcrystalline cellulose, polyvinylpyrrolidone K 30, sodium lauryl sulphate and polyethylene glycol 6000. The omeprazole delay release system was developed by coating the prepared pellets with aqueous dispersion of Kollicoat 30 DP. The moisture content, spheronization speed and residence time found to influence the final properties of omeprazole pellets prepared by extrusion-spheronization and sieving-spheronization. The Mann-Whitney test revealed that both methods produced closely similar characteristics of the pellets in terms of, friability (p=0.553), flowability (p=0.677), hardness (p=0.103) and density (bulk, p=0.514, tapped, p=0.149) except particle size distribution (p=0.004). The percent drug release from the coated formulation prepared by sieving-spheronization and extrusion spheronization was observed to be 84.12 ± 1.10% and 82.67 ± 0.96%, respectively. Dissolution profiles of both formulations were similar as indicated by values of f1 and f2, 1.52 and 89.38, respectively. The coated formulation prepared by sieving-spheronization and commercial reference product, Zimore ® also showed similar dissolution profiles (f1=1.22, f2=91.52). The pellets could be prepared using sieving-spheronization. The process is simple, easy, less time- and labor-consuming and economical as compared to extrusion-spheronization process.

Matched MeSH terms: Solubility
Fulltext Effect of different drying techniques on flowability characteristics and chemical properties of natural carbohydrate-protein Gum from durian fruit seed

Mirhosseini H, Amid BT

Chem Cent J, 2013 Jan 04;7(1):1.
PMID: 23289739 DOI: 10.1186/1752-153X-7-1

BACKGROUND: A natural carbohydrate biopolymer was extracted from the agricultural biomass waste (durian seed). Subsequently, the crude biopolymer was purified by using the saturated barium hydroxide to minimize the impurities. Finally, the effect of different drying techniques on the flow characteristics and functional properties of the purified biopolymer was investigated. The present study elucidated the main functional characteristics such as flow characteristics, water- and oil-holding capacity, solubility, and foaming capacity.
RESULTS: In most cases except for oven drying, the bulk density decreased, thus increasing the porosity. This might be attributed to the increase in the inter-particle voids of smaller sized particles with larger contact surface areas per unit volume. The current study revealed that oven-dried gum and freeze-dried gum had the highest and lowest compressibility index, thus indicating the weakest and strongest flowability among all samples. In the present work, the freeze-dried gum showed the lowest angle of repose, bulk, tapped and true density. This indicates the highest porosity degree of freeze dried gum among dried seed gums. It also exhibited the highest solubility, and foaming capacity thus providing the most desirable functional properties and flow characteristics among all drying techniques.
CONCLUSION: The present study revealed that freeze drying among all drying techniques provided the most desirable functional properties and flow characteristics for durian seed gum.

Matched MeSH terms: Solubility
Fulltext Near infrared spectral linearisation in quantifying soluble solids content of intact carambola

Omar AF, MatJafri MZ

Sensors (Basel), 2013;13(4):4876-83.
PMID: 23584118 DOI: 10.3390/s130404876

This study presents a novel application of near infrared (NIR) spectral linearisation for measuring the soluble solids content (SSC) of carambola fruits. NIR spectra were measured using reflectance and interactance methods. In this study, only the interactance measurement technique successfully generated a reliable measurement result with a coefficient of determination of (R2) = 0.724 and a root mean square error of prediction for (RMSEP) = 0.461° Brix. The results from this technique produced a highly accurate and stable prediction model compared with multiple linear regression techniques.

Matched MeSH terms: Solubility

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links