MyMedR

Displaying publications 81 - 100 of 241 in total

Abstract:

Sort:

Fulltext The influence of fibrinogen and other plasma proteins on the ESR and plasma viscosity

Ishak R, Hassan K

Med J Malaysia, 1985 Sep;40(3):191-5.
PMID: 3842714
Matched MeSH terms: Blood Viscosity*
Improvement of physicochemical properties of nanocolloidal carrier loaded with low water solubility drug for parenteral cancer treatment by Response Surface Methodology

Izadiyan Z, Basri M, Fard Masoumi HR, Abedi Karjiban R, Salim N, Kalantari K

Mater Sci Eng C Mater Biol Appl, 2019 Jan 01;94:841-849.
PMID: 30423770 DOI: 10.1016/j.msec.2018.10.015

Nanoemulsions have been used as a drug carrier system, particularly for poorly water-soluble drugs. Sorafenib is a poorly soluble drug and also there is no parenteral treatment. The aim of this study is the development of nanoemulsions for intravenous administration of Sorafenib. The formulations were prepared by high energy emulsification method and optimized by using Response Surface Methodology (RSM). Here, the effect of independent composition variables of lecithin (1.16-2.84%, w/w), Medium-Chain Triglycerides (2.32-5.68%, w/w) and polysorbate 80 (0.58-1.42%, w/w) amounts on the properties of Sorafenib-loaded nanoemulsion was investigated. The three responses variables were particle size, zeta potential, and polydispersity index. Optimization of the conditions according to the three dependent variables was performed for the preparation of the Sorafenib-loaded nanoemulsions with the minimum value of particle size, suitable rage of zeta potential, and polydispersity index. A formulation containing 0.05% of Sorafenib kept its properties in a satisfactory range over the evaluated period. The composition with 3% Medium-Chain Triglycerides, 2.5% lecithin and 1.22% polysorbate 80 exhibited the smallest particle size and polydispersity index (43.17 nm and 0.22, respectively) with the zeta potential of -38.8 mV was the optimized composition. The fabricated nanoemulsion was characterized by the transmission electron microscope (TEM), viscosity, and stability assessment study. Also, the cytotoxicity result showed that the optimum formulations had no significant effect on a normal cell in a low concentration of the drug but could eliminate the cancer cells. The dose-dependent toxicity made it a suitable candidate for parenteral applications in the treatment of breast cancer. Furthermore, the optimized formulation indicated good storage stability for 3 months at different temperatures (4 ± 2 °C, 25 ± 2 °C and 45 ± 2 °C).

Matched MeSH terms: Viscosity
Retinal findings in adult leukaemia: correlation with leukocytosis

Jackson N, Reddy SC, Hishamuddin M, Low HC

Clin Lab Haematol, 1996 Jun;18(2):105-9.
PMID: 8866143

The associations between retinal findings and haematological parameters in acute leukaemia are controversial. Sixty-three newly-diagnosed acute leukaemia patients, aged 12-77 years, were studied prospectively for the presence of intra-retinal haemorrhages (IRH), white-centred haemorrhages (WCH), cotton wool spots (CWS) and macular haemorrhages (MH), Thirty-three patients (52.4%) showed at least one retinal abnormality. The prevalence of individual findings was: IRH (30 cases), WCH (20 cases), CWS (5 cases), MH (11 cases). In contrast to previous studies, there was no association between any of these retinal findings and the haemoglobin level or the platelet count. There was a higher median WBC in patients with IRH (68 x 10(9)/l) than in those without IRH (15.4 x 10(9)/l), P = 0.037. When the acute myeloblastic leukaemia cases were considered separately, an association was also found between higher WBC and the presence of WCH and CWS. There was no association between retinal findings and FAB type in the AML cases. We conclude that a high WBC may be at least as important as anaemia and thrombocytopenia in the pathogenesis of the retinopathy of acute leukaemia.

Matched MeSH terms: Blood Viscosity
Synthesis and characterization of a new vertebroplasty cement based on gold-containing PMMA microspheres

Jacobs E, Saralidze K, Roth AK, de Jong JJ, van den Bergh JP, Lataster A, et al.

Biomaterials, 2016 Mar;82:60-70.
PMID: 26751820 DOI: 10.1016/j.biomaterials.2015.12.024

There are a number of drawbacks to incorporating large concentrations of barium sulfate (BaSO4) as the radiopacifier in PMMA-based bone cements for percutaneous vertebroplasty. These include adverse effects on injectability, viscosity profile, setting time, mechanical properties of the cement and bone resorption. We have synthesized a novel cement that is designed to address some of these drawbacks. Its powder includes PMMA microspheres in which gold particles are embedded and its monomer is the same as that used in commercial cements for vertebroplasty. In comparison to one such commercial cement brand, VertaPlex™, the new cement has longer doughing time, longer injection time, higher compressive strength, higher compressive modulus, and is superior in terms of cytotoxicity. For augmentation of fractured fresh-frozen cadaveric vertebral bodies (T6-L5) using simulated vertebroplasty, results for compressive strength and compressive stiffness of the construct and the percentage of the volume of the vertebral body filled by the cement were comparable for the two cements although the radiopacity of the new cement was significantly lower than that for VertaPlex™. The present results indicate that the new cement warrants further study.

Matched MeSH terms: Viscosity
Synthesis and characterization of esters derived from ricinoleic acid and evaluation of their low temperature property

Jumat Salimon, Nadia Salih, Yousif E

Sains Malaysiana, 2012;41:1239-1244.

A series of ester compounds derived from ricinoleic acid to be used as biolubricants base stock have been synthesized. The resulting products were confirmed by FTIR and NMR analyses. The synthesis was carried out in three stages: epoxidation of ricinoleic acid; synthesis of 10,12-dihydroxy-9-acyloxystearic acid from epoxidized ricinoleic acid with various fatty acids and esterification of the acyloxystearic acid products with octanol to yield octyl-10,12-dihydroxy-9-acyloxystearate. The viscosities, flash points and pour points (PP) behavior of the products were measured. The resulting esters had an increased in molar weight and viscosity and decreased in pour points as compared to ricinoleic acid.

Matched MeSH terms: Viscosity
Molecular structure, chemical properties and biological activities of Pinto bean pod polysaccharide

Kamarudin F, Gan CY

Int J Biol Macromol, 2016 Jul;88:280-7.
PMID: 27044345 DOI: 10.1016/j.ijbiomac.2016.04.003

Pinto bean pod polysaccharide (PBPP) was successfully extracted with yield of 38.5g/100g and the PBPP gave total carbohydrate and uronic acid contents of 286.2mg maltose equivalent/g and 374.3mgGal/g, respectively. The Mw of PBPP was 270.6kDa with intrinsic viscosity of 0.262dm(3)/g, which composed of mannose (2.5%), galacturonic acid (15.0%), rhamnose (4.0%), glucose (9.0%), galactose (62.2%), xylose (2.9%) and arabinose (4.3%) with trace amount of ribose and fucose. The result suggested that PBPP has a spherical conformation with a highly branched structure. Fourier Transform Infrared analysis showed that PBPP has a similar structure as commercial pectin with an esterification degree of 59.9%, whereas scanning electron microscopy study showed that the crude polysaccharide formed a thin layer of film that was made of multiple micro strands of fibre. PBPP exhibited substantial free radical scavenging activity (7.7%), metal reducing capability (2.04mmol/dm(3)) and α-amylase inhibitory activity (97.6%) at a total amount of 1mg. PBPP also exhibited high water- and oil-holding capacities (3.6g/g and 2.8g/g, respectively). At a low concentration, PBPP exhibited emulsifying activity of 39.6% with stability of 38.6%. Apart from that, PBPP was able to show thickening capability at low concentration (0.005kg/dm(3)).

Matched MeSH terms: Viscosity
Fulltext Rheological Study of Phenol Formaldehyde Resole Resin Synthesized for Laminate Application

Kamarudin N, Awang Biak DR, Zainal Abidin Z, Cardona F, Sapuan SM

Materials (Basel), 2020 Jun 05;13(11).
PMID: 32516968 DOI: 10.3390/ma13112578

Heat explosions are sometimes observed during the synthesis of phenol formaldehyde (PF) resin. This scenario can be attributed to the high latent heat that was released and not dissipated leading to the occurrence of a runaway reaction. The synthesis temperature and time played important roles in controlling the heat release, hence preventing the resin from hardening during the synthesis process. This study aims to assess the rheological and viscoelasticity behaviors of the PF resin prepared using paraformaldehyde. The prepared PF resin was designed for laminate applications. The rheological behavior of the PF resin was assessed based on the different molar ratios of phenol to paraformaldehyde (P:F) mixed in the formulation. The molar ratios were set at 1.00:1.25, 1.00:1.50 and 1.00:1.75 of P to F, respectively. The rheological study was focused at specific synthesis temperatures, namely 40, 60, 80 and 100 °C. The synthesis time was observed for 240 min; changes in physical structure and viscosity of the PF resins were noted. It was observed that the viscosity values of the PF resins prepared were directly proportional to the synthesis temperature and the formaldehyde content. The PF resin also exhibited shear thickening behavior for all samples synthesized at 60 °C and above. For all PF resin samples synthesized at 60 °C and above, their viscoelasticity results indicated that the storage modulus (G'), loss modulus(G″) and tan δ are proportionally dependent on both the synthesis temperature and the formaldehyde content. Heat explosions were observed during the synthesis of PF resin at the synthesis temperature of 100 °C. This scenario can lead to possible runaway reaction which can also compromise the safety of the operators.

Matched MeSH terms: Viscosity
Fulltext Chemical reaction and variable viscosity effect on mixed heat and mass transfer convection for Hiemenz flow over a porous wedge with heat radiation

Kandasamy, R., Azme, Hashim, I., Ismoen, M.

ASM Science Journal, 2008;2(1):23-33.
MyJurnal

The effect of chemical reaction and variable viscosity on mixed convection heat and mass transfer for Hiemenz flow over a porous wedge plate was studied in the presence of heat radiation. The wall of the wedge was embedded in a uniform Darcian porous medium to allow for possible fluid wall suction or injection and had a power-law variation of both the wall temperature and concentration. The fluid was assumed to be viscous and incompressible. Numerical calculations were carried out for different values of dimensionless parameters and an analysis of the results obtained showed that the flow field was influenced appreciably by the buoyancy ratio between species, thermal diffusion and suction/injection at wall surface. The effects of these major parameters on the transport behaviours were investigated methodically and typical results illustrated to reveal the tendency of the solutions. Representative results are presented for the velocity, temperature, and concentration distributions. Comparisons with previously published works were performed and excellent agreement between the results were obtained. It is predicted that this research might prove to be useful for study of the movement of oil or gas and water through the reservoir of an oil or gas field, in the migration of underground water, in filtration, and water purification processes.

Matched MeSH terms: Viscosity
Effects of phosphorus contents on the gelatinization and retrogradation of potato starch

Karim AA, Toon LC, Lee VP, Ong WY, Fazilah A, Noda T

J Food Sci, 2007 Mar;72(2):C132-8.
PMID: 17995828

Effects of phosphorus content (510 to 987 ppm) on the gelatinization and retrogradation of 6 potato cultivars (Benimaru, Hokkaikogane, Irish Cobbler, Konafubuki, Sakurafubuki, and Touya) were studied. Pasting properties were analyzed by RVA, thermal properties by DSC, and mechanical properties of the starch gels by TA. Phosphorus was positively correlated with swelling power (r= 0.84) and negatively correlated with solubility (r= 0.83). Phosphorus content showed significant effect on certain pasting properties of potato starch such as peak viscosity, breakdown, and setback. Phosphorus content showed a significant positive correlation with peak viscosity (r= 0.95) and breakdown (r= 0.90). Increasing concentration of phosphorus tends to decrease the setback. Phosphorus content had no influence on thermal properties and mechanical properties of potato starch gel.

Matched MeSH terms: Viscosity
Effects of storage conditions of Moringa oleifera seeds on its performance in coagulation

Katayon S, Noor MJ, Asma M, Ghani LA, Thamer AM, Azni I, et al.

Bioresour Technol, 2006 Sep;97(13):1455-60.
PMID: 16213137

Moringa oleifera is a plant whose seeds have coagulation properties for treating water and wastewater. In this study the coagulation efficiency of Moringa oleifera kept in different storage conditions were studied. The Moringa oleifera seeds were stored at different conditions and durations; open container and closed container at room temperature (28 degrees C) and refrigerator (3 degrees C) for durations of 1, 3 and 5 months. Comparison between turbidity removal efficiency of Moringa oleifera kept in refrigerator and room temperature revealed that there was no significant difference between them. The Moringa oleifera kept in refrigerator and room temperature for one month showed higher turbidity removal efficiency, compared to those kept for 3 and 5 months, at both containers. The coagulation efficiency of Moringa oleifera was found to be dependent on initial turbidity of water samples. Highest turbidity removals were obtained for water with very high initial turbidity. In summary coagulation efficiency of Moringa oleifera was found independent of storage temperature and container, however coagulation efficiency of Moringa oleifera decreased as storage duration increased. In addition, Moringa oleifera can be used as a potential coagulant especially for very high turbidity water.

Matched MeSH terms: Viscosity
Fulltext Investigation on the use of graphene oxide as novel surfactant to stabilize weakly charged graphene nanoplatelets

Kazi SN, Badarudin A, Zubir MN, Ming HN, Misran M, Sadeghinezhad E, et al.

Nanoscale Res Lett, 2015;10:212.
PMID: 25995712 DOI: 10.1186/s11671-015-0882-7

This paper presents a unique synergistic behavior between a graphene oxide (GO) and graphene nanoplatelet (GnP) composite in an aqueous medium. The results showed that GO stabilized GnP colloid near its isoelectric point and prevented rapid agglomeration and sedimentation. It was considered that a rarely encountered charge-dependent electrostatic interaction between the highly charged GO and weakly charged GnP particles kept GnP suspended at its rapid coagulation and phase separation pH. Sedimentation and transmission electron microscope (TEM) micrograph images revealed the evidence of highly stable colloidal mixtures while zeta potential measurement provided semi-quantitative explanation on the mechanism of stabilization. GnP suspension was confirmed via UV-vis spectral data while contact angle measurement elucidated the close resemblance to an aqueous solution indicating the ability of GO to mediate the flocculation prone GnP colloids. About a tenfold increase in viscosity was recorded at a low shear rate in comparison to an individual GO solution due to a strong interaction manifested between participating colloids. An optimum level of mixing ratio between the two constituents was also obtained. These new findings related to an interaction between charge-based graphitic carbon materials would open new avenues for further exploration on the enhancement of both GO and GnP functionalities particularly in mechanical and electrical domains.

Matched MeSH terms: Viscosity
Scale-up synthesis of lipase-catalyzed palm esters in stirred-tank reactor

Keng PS, Basri M, Ariff AB, Abdul Rahman MB, Abdul Rahman RN, Salleh AB

Bioresour Technol, 2008 Sep;99(14):6097-104.
PMID: 18243690 DOI: 10.1016/j.biortech.2007.12.049

Lipase-catalyzed production of palm esters by alcoholysis of palm oil with oleyl alcohol in n-hexane was performed in 2L stirred-tank reactor (STR). Investigation on the performance of reactor operation was carried out in batch mode STR with single impeller mounted on the centrally located shaft. Rushton turbine (RT) impellers provide the highest reaction yield (95.8%) at lower agitation speed as compared to AL-hydrofoil (AL-H) and 2-bladed elephant ear (EE) impellers. Homogenous enzyme particles suspension was obtained at 250 rpm by using RT impeller. At higher impeller speed, the shear effect on the enzyme particles caused by agitation has decreased the reaction performance. Palm esters reaction mixture in STR follows Newtons' law due to the linear relation between the shear stress (tau) and shear rate (dupsilon/dy). High stability of Lipozyme RM IM was observed as shown by its ability to be repeatedly used to give high percentage yield (79%) of palm esters even after 15 cycles of reaction. The process was successfully scale-up to 75 L STR (50 L working volume) based on a constant impeller tip speed approach, which gave the yield of 97.2% after 5h reaction time.

Matched MeSH terms: Viscosity
Fulltext Surface-Functionalized Superparamagnetic Nanoparticles (SPNs) for Enhanced Oil Recovery: Effects of Surface Modifiers and Their Architectures

Khalil M, Aulia G, Budianto E, Mohamed Jan B, Habib SH, Amir Z, et al.

ACS Omega, 2019 Dec 17;4(25):21477-21486.
PMID: 31867543 DOI: 10.1021/acsomega.9b03174

Superparamagnetic nanoparticles (SPNs) have been considered as one of the most studied nanomaterials for subsurface applications, including in enhanced oil recovery (EOR), due to their unique physicochemical properties. However, a comprehensive understanding of the effect of surface functionalization on the ability of the nanoparticles to improve secondary and tertiary oil recoveries remains unclear. Therefore, investigations on the application of bare and surface-functionalized SPNs in EOR using a sand pack were carried out in this study. Here, the as-prepared SPNs were functionalized using oleic acid (OA) and polyacrylamide (PAM) to obtain several types of nanostructure architectures such as OA-SPN, core-shell SPN@PAM, and SPN-PAM. Based on the result, it is found that both the viscosity and mobility of the nanofluids were significantly affected by not only the concentration of the nanoparticles but also the type and architecture of the surface modifier, which dictated particle hydrophilicity. According to the sand pack tests, the nanofluid containing SPN-PAM was able to recover as much as 19.28% of additional oil in a relatively low concentration (0.9% w/v). The high oil recovery enhancement was presumably due to the ability of suspended SPN-PAM to act as a mobility control and wettability alteration agent and facilitate the formation of a Pickering emulsion and disjoining pressure.

Matched MeSH terms: Viscosity
Fulltext Effects of wall shear stress on unsteady MHD conjugate flow in a porous medium with ramped wall temperature

Khan A, Khan I, Ali F, Ulhaq S, Shafie S

PLoS One, 2014;9(3):e90280.
PMID: 24621775 DOI: 10.1371/journal.pone.0090280

This study investigates the effects of an arbitrary wall shear stress on unsteady magnetohydrodynamic (MHD) flow of a Newtonian fluid with conjugate effects of heat and mass transfer. The fluid is considered in a porous medium over a vertical plate with ramped temperature. The influence of thermal radiation in the energy equations is also considered. The coupled partial differential equations governing the flow are solved by using the Laplace transform technique. Exact solutions for velocity and temperature in case of both ramped and constant wall temperature as well as for concentration are obtained. It is found that velocity solutions are more general and can produce a huge number of exact solutions correlative to various fluid motions. Graphical results are provided for various embedded flow parameters and discussed in details.

Matched MeSH terms: Viscosity
Efficient conversion of lignocellulosic biomass to levulinic acid using acidic ionic liquids

Khan AS, Man Z, Bustam MA, Nasrullah A, Ullah Z, Sarwono A, et al.

Carbohydr Polym, 2018 Feb 01;181:208-214.
PMID: 29253965 DOI: 10.1016/j.carbpol.2017.10.064

In the present research work, dicationic ionic liquids, containing 1,4-bis(3-methylimidazolium-1-yl) butane ([C4(Mim)2]) cation with counter anions [(2HSO4)(H2SO4)0], [(2HSO4)(H2SO4)2] and [(2HSO4)(H2SO4)4] were synthesised. ILs structures were confirmed using 1H NMR spectroscopy. Thermal stability, Hammett acidity, density and viscosity of ILs were determined. Various types of lignocellulosic biomass such as rubber wood, palm oil frond, bamboo and rice husk were converted into levulinic acid (LA). Among the synthesized ionic liquids, [C4(Mim)2][(2HSO4)(H2SO4)4] showed higher % yield of LA up to 47.52 from bamboo biomass at 110°C for 60min, which is the better yield at low temperature and short time compared to previous reports. Surface morphology, surface functional groups and thermal stability of bamboo before and after conversion into LA were studied using SEM, FTIR and TGA analysis, respectively. This one-pot production of LA from agro-waste will open new opportunity for the conversion of sustainable biomass resources into valuable chemicals.

Matched MeSH terms: Viscosity
Fulltext Unexpected acceleration of Ultrasonic-Assisted iodide dosimetry in the catalytic presence of ionic liquids

Krishnan S, Abd Ghani N, Aminuddin NF, Quraishi KS, Razafindramangarafara BL, Baup S, et al.

Ultrason Sonochem, 2021 Jun;74:105576.
PMID: 33975186 DOI: 10.1016/j.ultsonch.2021.105576

This study investigates the potential of using small amounts of ionic liquids (IL) to enhance ultrasound-assisted extraction of lipids content from green microalgae. Three imidazolium-based ILs (butyl, octyl and dodecyl), each of them with two anions (bromide and acetate) were tested as additives. Viscosity and surface tension of the ILs aqueous mixtures were analyzed to determine the influence of ILs' anions and alkyl chain length, whereas KI dosimetry experiments were used as an indicator of radicals formation. A key finding suggests that the small addition of ILs improves the ultrasonication either by enhancing the viscosity and reducing the water surface tension, leading to a more powerful acoustic cavitation process or by increasing HO° production likely to oxidize the microalgae cells membranes, and consequently disrupting them on a more efficient manner. KI dosimetry also revealed that long ILs alkyl chain is detrimental. This experimental observation is confirmed thus strengthened as the yield of extracted lipids from green microalgae has shown an incremental trend when the IL concentration also increased. These hypotheses are currently under investigation to spot detailed impact of ILs on cavitation process.

Matched MeSH terms: Viscosity
Effects of ultraviolet irradiation on the physicochemical and functional properties of gum arabic

Kuan YH, Bhat R, Senan C, Williams PA, Karim AA

J Agric Food Chem, 2009 Oct 14;57(19):9154-9.
PMID: 19757813 DOI: 10.1021/jf9015625

The impact of ultraviolet (UV) irradiation on the physicochemical and functional properties of gum arabic was investigated. Gum arabic samples were exposed to UV irradiation for 30, 60, 90, and 120 min; gum arabic was also treated with formaldehyde for comparison. Molecular weight analysis using gel permeation chromatography indicated that no significant changes occurred on the molecular structure on the samples exposed to UV irradiation. Free amino group analysis indicated that mild UV irradiation (30 min) could induce cross-linking on gum arabic; this result was comparable with that of samples treated with formaldehyde. However, viscosity break down was observed for samples exposed to UV irradiation for longer times (90 and 120 min). All irradiated and formaldehyde-treated samples exhibited better emulsification properties than unirradiated samples. These results indicate that UV-irradiated gum arabic could be a better emulsifier than the native (unmodified) gum arabic and could be exploited commercially.

Matched MeSH terms: Viscosity
Fulltext In situ ophthalmic gel forming systems of poloxamer 407 and hydroxypropyl methyl cellulose mixtures for sustained ocular delivery of chloramphenicole: optimization study by factorial design

Kurniawansyah IS, Rusdiana T, Sopyan I, Ramoko H, Wahab HA, Subarnas A

Heliyon, 2020 Nov;6(11):e05365.
PMID: 33251348 DOI: 10.1016/j.heliyon.2020.e05365

Background: Conventional drug delivery systems have some major drawbacks such as low bioavailability, short residence time and rapid precorneal drainage. An in situ gel drug delivery system provides several benefits, such as prolonged pharmacological duration of action, simpler production techniques, and low cost of manufacturing. This research aims to get the optimum formula of chloramphenicol in situ gel based on the physical evaluation.
Methods: The effects of independent variables (poloxamer 407 and hydroxypropyl methyl cellulose (HPMC) concentration) on various dependent variables (gelling capacity, pH and viscosity) were investigated by using 32 factorial design and organoleptic evaluation was done with descriptive analysis.
Results: The optimized formula of chloramphenicol in situ gel yielded 9 variations of poloxamer 407 and HPMC bases composition in % w/v as follows, F1 (5; 0.45), F2 (7.5; 0.45), F3 (10; 0.45), F4 (5; 0.725), F5 (7.5; 0.725), F6 (10; 0.725), F7 (5; 1), F8 (7.5; 1), F9 (10; 1). The results indicated that the organoleptic, pH, and gelling capacity parameters matched all formulas (F1-F9), however, the viscosity parameter only matched F3, F6, F8, and F9. Based on factorial design, F6 had the best formula with desirability value of 0.54, but the design recommended that formula with the composition bases of poloxamer 407 and HPMC at the ratio of 8.16 % w/v and 0.77 % w/v, respectively, was the optimum formula with a desirability value of 0.69.
Conclusion: All formulas have met the Indonesian pharmacopoeia requirements based on the physical evaluation, especially formula 6 (F6), which was supported by the result of factorial design analysis.

Matched MeSH terms: Viscosity
Fulltext Characterization of flaxseed oil emulsions

Lee PE, Choo WS

J Food Sci Technol, 2015 Jul;52(7):4378-86.
PMID: 26139903 DOI: 10.1007/s13197-014-1495-3

The emulsifying capacity of surfactants (polysorbate 20, polysorbate 80 and soy lecithin) and proteins (soy protein isolate and whey protein isolate) in flaxseed oil was measured based on 1 % (w/w) of emulsifier. Surfactants showed significantly higher emulsifying capacity compared to the proteins (soy protein isolate and whey protein isolate) in flaxseed oil. The emulsion stability of the flaxseed oil emulsions with whey protein isolate (10 % w/w) prepared using a mixer was ranked in the following order: 1,000 rpm (58 min) ≈ 1,000 rpm (29 min) ≈ 2,000 rpm (35 min) >2,000 rpm (17.5 min). The emulsion stability of the flaxseed oil emulsions with whey protein isolate (10 % w/w) prepared using a homogenizer (Ultra Turrax) was independent of the speed and mixing time. The mean particle size of the flaxseed oil emulsions prepared using the two mixing devices ranged from 23.99 ± 1.34 μm to 47.22 ± 1.99 μm where else the particle size distribution and microstructure of the flaxseed oil emulsions demonstrated using microscopic imaging were quite similar. The flaxseed oil emulsions had a similar apparent viscosity and exhibited shear thinning (pseudoplastic) behavior. The flaxseed oil emulsions had L* value above 70 and was in the red-yellow color region (positive a* and b* values).

Matched MeSH terms: Viscosity
Unconfined compression properties of a porous poly(vinyl alcohol)-chitosan-based hydrogel after hydration

Lee SY, Pereira BP, Yusof N, Selvaratnam L, Yu Z, Abbas AA, et al.

Acta Biomater, 2009 Jul;5(6):1919-25.
PMID: 19289306 DOI: 10.1016/j.actbio.2009.02.014

A poly(vinyl alcohol) (PVA) hydrogel composite scaffold containing N,O-carboxymethylated chitosan (NOCC) was tested to assess its potential as a scaffold for cartilage tissue engineering in a weight-bearing environment. The mechanical properties under unconfined compression for different hydration periods were investigated. The effect of supplementing PVA with NOCC (20wt.% PVA:5vol.% NOCC) produced a porosity of 43.3% and this was compared against a non-porous PVA hydrogel (20g PVA: 100ml of water, control). Under non-hydrated conditions, the porous PVA-NOCC hydrogel behaved in a similar way to the control non-porous PVA hydrogel, with similar non-linear stress-strain response under unconfined compression (0-30% strain). After 7days' hydration, the porous hydrogel demonstrated a reduced stiffness (0.002kPa, at 25% strain), resulting in a more linear stiffness relationship over a range of 0-30% strain. Poisson's ratio for the hydrated non-porous and porous hydrogels ranged between 0.73 and 1.18, and 0.76 and 1.33, respectively, suggesting a greater fluid flow when loaded. The stress relaxation function for the porous hydrogel was affected by the hydration period (from 0 to 600s); however the percentage stress relaxation regained by about 95%, after 1200s for all hydration periods assessed. No significant differences were found between the different hydration periods between the porous hydrogels and control. The calculated aggregate modulus, H(A), for the porous hydrogel reduced drastically from 10.99kPa in its non-hydrated state to about 0.001kPa after 7days' hydration, with the calculated shear modulus reducing from 30.92 to 0.14kPa, respectively. The porous PVA-NOCC hydrogel conformed to a biphasic, viscoelastic model, which has the desired properties required for any scaffold in cartilage tissue engineering.

Matched MeSH terms: Viscosity

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links