Displaying publications 101 - 120 of 153 in total

Abstract:
Sort:
  1. Kabir MA, Goh KL, Khan MM
    Am J Mens Health, 2013 Mar;7(2):128-37.
    PMID: 23065136 DOI: 10.1177/1557988312462737
    This article aimed to identify the determinants of tobacco consumption and illegal drug use (IDU) as well as to examine the association between these two variables using a representative sample of 3,771 Bangladeshi males aged 15 to 54 years. Data were collected through Bangladesh Demographic and Health Survey 2007. To identify the determinants, the patterns of tobacco consumption and IDU were analyzed by age, education and occupation, residence, mass media, premarital sex, wealth, and sexually transmitted infections (STIs). Prevalence of smoking cigarette and bidi was roughly 60%. However, the prevalence of IDU was 3.4%, and this proportion is statistically significant (Z = 11.32, p = .000). After bivariate analysis, almost all variables except STIs were significantly associated with tobacco consumption. Similarly, all variables except residence and mass media were associated with IDU. Based on multivariable adjusted logistic regression analysis, the likelihood of using IDU was approximately twofold (odds ratio [OR] = 1.8, 95% confidence interval [CI] = 1.23-2.53) among bidi smokers and fourfold (OR = 3.8, 95% CI = 2.62-5.56) among cigarette smokers as compared with nonsmokers.
  2. Kabir MA, Goh KL, Khan MM
    Asia Pac J Public Health, 2015 Mar;27(2):NP1578-90.
    PMID: 23359868 DOI: 10.1177/1010539512472357
    Adolescent tobacco use (ATU) is on the rise worldwide and the problem is particularly severe in developing countries. Based on nationally representative data, this study aims to investigate the association between ATU and its possible correlates for Bangladesh, where the prevalence rate of ATU is high. The data set is extracted from the Global Youth Tobacco Survey for Bangladesh conducted in 2007. The survey collected information from a total of 3113 students from 52 schools, with a response rate of 100% at the school level, while a response rate of 88.9% was achieved from the students. Students covered in the survey were in grades 7, 8, 9, and 10, with age ranging from 11 to 17 years. The prevalence rate of ATU at the time of the survey was 8.4%, while 35.6% of the students had used at least a type of tobacco products before. Logistic regressions were used to obtain the odds ratios (ORs) in favor of ATU for each of the possible determinants and the confidence intervals (CIs) of these ratios. Use of tobacco among friends (OR = 3.46; CI = 2.37-5.05), the experience of seeing others smoking at home (OR = 2.10; CI = 1.36-3.22) or other places (OR = 1.6; CI = 1.02-2.57), receiving pocket money (OR = 7.6; CI = 4.59-13.28), receiving free tobacco from vendors (OR = 2.3; CI = 1.44-3.78), and exposure to advertisements and promotions of tobacco products (OR = 1.83; CI = 1.23-2.79) were associated with a higher likelihood of ATU. Increased awareness of health hazards of tobacco use through education in schools helped mitigate the problem of ATU. The findings of this study have ramifications for tobacco control prevention strategies in Bangladesh.
  3. James SL, Castle CD, Dingels ZV, Fox JT, Hamilton EB, Liu Z, et al.
    Inj Prev, 2020 10;26(Supp 1):i96-i114.
    PMID: 32332142 DOI: 10.1136/injuryprev-2019-043494
    BACKGROUND: Past research in population health trends has shown that injuries form a substantial burden of population health loss. Regular updates to injury burden assessments are critical. We report Global Burden of Disease (GBD) 2017 Study estimates on morbidity and mortality for all injuries.

    METHODS: We reviewed results for injuries from the GBD 2017 study. GBD 2017 measured injury-specific mortality and years of life lost (YLLs) using the Cause of Death Ensemble model. To measure non-fatal injuries, GBD 2017 modelled injury-specific incidence and converted this to prevalence and years lived with disability (YLDs). YLLs and YLDs were summed to calculate disability-adjusted life years (DALYs).

    FINDINGS: In 1990, there were 4 260 493 (4 085 700 to 4 396 138) injury deaths, which increased to 4 484 722 (4 332 010 to 4 585 554) deaths in 2017, while age-standardised mortality decreased from 1079 (1073 to 1086) to 738 (730 to 745) per 100 000. In 1990, there were 354 064 302 (95% uncertainty interval: 338 174 876 to 371 610 802) new cases of injury globally, which increased to 520 710 288 (493 430 247 to 547 988 635) new cases in 2017. During this time, age-standardised incidence decreased non-significantly from 6824 (6534 to 7147) to 6763 (6412 to 7118) per 100 000. Between 1990 and 2017, age-standardised DALYs decreased from 4947 (4655 to 5233) per 100 000 to 3267 (3058 to 3505).

    INTERPRETATION: Injuries are an important cause of health loss globally, though mortality has declined between 1990 and 2017. Future research in injury burden should focus on prevention in high-burden populations, improving data collection and ensuring access to medical care.

  4. James SL, Castle CD, Dingels ZV, Fox JT, Hamilton EB, Liu Z, et al.
    Inj Prev, 2020 Oct;26(Supp 1):i125-i153.
    PMID: 32839249 DOI: 10.1136/injuryprev-2019-043531
    BACKGROUND: While there is a long history of measuring death and disability from injuries, modern research methods must account for the wide spectrum of disability that can occur in an injury, and must provide estimates with sufficient demographic, geographical and temporal detail to be useful for policy makers. The Global Burden of Disease (GBD) 2017 study used methods to provide highly detailed estimates of global injury burden that meet these criteria.

    METHODS: In this study, we report and discuss the methods used in GBD 2017 for injury morbidity and mortality burden estimation. In summary, these methods included estimating cause-specific mortality for every cause of injury, and then estimating incidence for every cause of injury. Non-fatal disability for each cause is then calculated based on the probabilities of suffering from different types of bodily injury experienced.

    RESULTS: GBD 2017 produced morbidity and mortality estimates for 38 causes of injury. Estimates were produced in terms of incidence, prevalence, years lived with disability, cause-specific mortality, years of life lost and disability-adjusted life-years for a 28-year period for 22 age groups, 195 countries and both sexes.

    CONCLUSIONS: GBD 2017 demonstrated a complex and sophisticated series of analytical steps using the largest known database of morbidity and mortality data on injuries. GBD 2017 results should be used to help inform injury prevention policy making and resource allocation. We also identify important avenues for improving injury burden estimation in the future.

  5. Jakir Hossain Khan M, Azlan Hussain M, Mujtaba IM
    Polymers (Basel), 2016 Jun 14;8(6).
    PMID: 30979325 DOI: 10.3390/polym8060220
    In this study, a novel multiphasic model for the calculation of the polypropylene production in a complicated hydrodynamic and the physiochemical environments has been formulated, confirmed and validated. This is a first research attempt that describes the development of the dual-phasic phenomena, the impact of the optimal process conditions on the production rate of polypropylene and the fluidized bed dynamic details which could be concurrently obtained after solving the model coupled with the CFD (computational fluid dynamics) model, the basic mathematical model and the moment equations. Furthermore, we have established the quantitative relationship between the operational condition and the dynamic gas⁻solid behavior in actual reaction environments. Our results state that the proposed model could be applied for generalizing the production rate of the polymer from a chemical procedure to pilot-scale chemical reaction engineering. However, it was assumed that the solids present in the bubble phase and the reactant gas present in the emulsion phase improved the multiphasic model, thus taking into account that the polymerization took place mutually in the emulsion besides the bubble phase. It was observed that with respect to the experimental extent of the superficial gas velocity and the Ziegler-Natta feed rate, the ratio of the polymer produced as compared to the overall rate of production was approximately in the range of 9%⁻11%. This is a significant amount and it should not be ignored. We also carried out the simulation studies for comparing the data of the CFD-dependent dual-phasic model, the emulsion phase model, the dynamic bubble model and the experimental results. It was noted that the improved dual-phasic model and the CFD model were able to predict more constricted and safer windows at similar conditions as compared to the experimental results. Our work is unique, as the integrated developed model is able to offer clearer ideas related to the dynamic bed parameters for the separate phases and is also capable of computing the chemical reaction rate for every phase in the reaction. Our improved mutiphasic model revealed similar dynamic behaviour as the conventional model in the initial stages of the polymerization reaction; however, it diverged as time progressed.
  6. Jakinala P, Lingampally N, Hameeda B, Sayyed RZ, Khan M Y, Elsayed EA, et al.
    PLoS One, 2021;16(3):e0241729.
    PMID: 33735177 DOI: 10.1371/journal.pone.0241729
    Silver nanoparticles (AgNPs) are among the most widely synthesized and used nanoparticles (NPs). AgNPs have been traditionally synthesized from plant extracts, cobwebs, microorganisms, etc. However, their synthesis from wing extracts of common insect; Mang mao which is abundantly available in most of the Asian countries has not been explored yet. We report the synthesis of AgNPs from M. mao wings extract and its antioxidant and antimicrobial activity. The synthesized AgNPs were spherical, 40-60 nm in size and revealed strong absorption plasmon band around at 430 nm. Highly crystalline nature of these particles as determined by Energy-dispersive X-ray analysis and X-ray diffraction further confirmed the presence of AgNPs. Hydrodynamic size and zeta potential of AgNPs were observed to be 43.9 nm and -7.12 mV, respectively. Fourier-transform infrared spectroscopy analysis revealed the presence of characteristic amide proteins and aromatic functional groups. Thin-layer chromatography (TLC) and Gas chromatography-mass spectroscopy (GC-MS) analysis revealed the presence of fatty acids in the wings extract that may be responsible for biosynthesis and stabilization of AgNPs. Further, SDS-PAGE of the insect wing extract protein showed the molecular weight of 49 kDa. M. mao silver nanoparticles (MMAgNPs) exhibit strong antioxidant, broad-range antibacterial and antifungal activities, (66.8 to 87.0%), broad-range antibacterial and antifungal activities was found with maximum zone of inhibition against Staphylococcus aureus MTCC 96 (35±0.4 mm) and Fusarium oxysporum f. sp. ricini (86.6±0.4) which signifies their biomedical and agricultural potential.
  7. Jahurul MHA, Shian OK, Sharifudin MS, Hasmadi M, Lee JS, Mansoor AH, et al.
    J Food Sci Technol, 2021 Mar;58(3):902-910.
    PMID: 33678873 DOI: 10.1007/s13197-020-04604-1
    The objective of this study was to optimize the extraction of oil from pre-dried roselle seeds using response surface methodology (RSM). We also determined the oxidative stability of oil extracted from oven and freeze-dried roselle seed in terms of iodine value (IV), free fatty acid (FFA) value, peroxide value (PV), P-anisidine and total oxidation values (TOTOX value). The RSM was designated based on the central composite design with the usage of three optimum parameters ranged from 8 to 16 g of sample weight, 250-350 mL of solvent volume, and 6-8 h of extraction time. The highest oil yielded from roselle seed using the optimization process was 22.11% with the parameters at sample weight of 14.4 g, solvent volume of 329.70 mL, and extraction time of 7.6 h. Besides, the oil extracted from the oven dried roselle seed had the values of 89.04, 2.11, 4.13, 3.76 and 12.03 for IV, FFA, PV, P-anisidine, and TOTOX values, respectively. While for the oil extracted from freeze-dried roselle seed showed IV of 90.31, FFA of 1.64, PV of 2.47, P-anisidine value of 3.48, and TOTOX value of 8.42. PV and TOTOX values showed significant differences whereas; IV, FFA, and P-anisidine values showed no significant differences between the oven and freeze-dried roselle seed oils.
  8. Iqbal J, Ahmad RB, Khan M, Fazal-E-Amin, Alyahya S, Nizam Nasir MH, et al.
    PLoS One, 2020;15(4):e0229785.
    PMID: 32271783 DOI: 10.1371/journal.pone.0229785
    Software development outsourcing is becoming more and more famous because of the advantages like cost abatement, process enhancement, and coping with the scarcity of needed resources. Studies confirm that unfortunately a large proportion of the software development outsourcing projects fails to realize anticipated benefits. Investigations into the failures of such projects divulge that in several cases software development outsourcing projects are failed because of the issues that are associated with requirements engineering process. The objective of this study is the identification and the ranking of the commonly occurring issues of the requirements engineering process in the case of software development outsourcing. For this purpose, contemporary literature has been assessed rigorously, issues faced by practitioners have been identified and three questionnaire surveys have been organized by involving experienced software development outsourcing practitioners. The Delphi technique, cut-off value method and 50% rule have also been employed. The study explores 150 issues (129 issues from literature and 21 from industry) of requirements engineering process for software development outsourcing, groups the 150 issues into 7 identified categories and then extricates 43 customarily or commonly arising issues from the 150 issues. Founded on 'frequency of occurrence' the 43 customarily arising issues have been ranked with respect to respective categories (category-wise ranking) and with respect to all the categories (overall ranking). Categories of the customarily arising issues have also been ranked. The issues' identification and ranking contribute to design proactive software project management plan for dealing with software development outsourcing failures and attaining conjectured benefits of the software development outsourcing.
  9. Inwang EE, Khan MA, Brown AW
    Bull World Health Organ, 1967;36(3):409-21.
    PMID: 5299673
    The yellow fever mosquito Aedes aegypti has developed resistance to DDT in the Caribbean region and in South-East Asia, but not in West Africa. Therefore West African strains were compared with South-East Asian strains for their response to laboratory selection with DDT. It was found that West African strains were much slower to respond initially, but eventually could build up a high degree of DDT-resistance. By crossing and backcrossing with a susceptible marker-gene strain, it was found that this resistance was due to a single gene linked with the gene y (yellow) on chromosome 2 at a cross-over distance of approximately 35 units in an Upper Volta strain as in a Bangkok strain; interstrain crosses indicated that the gene was the same as that in a Trinidad strain and in one from Penang. Dieldrin-resistance could be readily induced in the Upper Volta strain and proved to be due to a gene also linked with y but at a crossover distance of approximately 25 units, comparable to that in Caribbean strains previously studied. Material from Karachi, West Pakistan, developed a dieldrin-resistance also showing 25% crossing over with y, and a DDT-resistance also linked with this chromosome-2 marker gene.
  10. Ikram R, Jan BM, Ahmad W, Sidek A, Khan M, Kenanakis G
    Materials (Basel), 2022 Nov 21;15(22).
    PMID: 36431754 DOI: 10.3390/ma15228266
    Throughout the world, the construction industry produces significant amounts of by-products and hazardous waste materials. The steel-making industry generates welding waste and dusts that are toxic to the environment and pose many economic challenges. Water-based drilling fluids (WBDF) are able to remove the drill cuttings in a wellbore and maintain the stability of the wellbore to prevent formation damage. To the best of our knowledge, this is the first study that reports the application of welding waste and its derived graphene oxide (GO) as a fluid-loss additive in drilling fluids. In this research, GO was successfully synthesized from welding waste through chemical exfoliation. The examination was confirmed using XRD, FTIR, FESEM and EDX analyses. The synthesized welding waste-derived GO in WBDF is competent in improving rheological properties by increasing plastic viscosity (PV), yield point (YP) and gel strength (GS), while reducing filtrate loss (FL) and mud cake thickness (MCT). This study shows the effect of additives such as welding waste, welding waste-derived GO and commercial GO, and their amount, on the rheological properties of WBDF. Concentrations of these additives were used at 0.01 ppb, 0.1 ppb and 0.5 ppb. Based on the experiment results, raw welding waste and welding waste-derived GO showed better performance compared with commercial GO. Among filtration properties, FL and MCT were reduced by 33.3% and 39.7% with the addition of 0.5 ppb of raw welding-waste additive, while for 0.5 ppb of welding waste-derived GO additive, FL and MCT were reduced by 26.7% and 20.9%, respectively. By recycling industrial welding waste, this research conveys state-of-the-art and low-cost drilling fluids that aid in waste management, and reduce the adverse environmental and commercial ramifications of toxic wastes.
  11. Iftikhar B, Alih SC, Vafaei M, Javed MF, Rehman MF, Abdullaev SS, et al.
    Sci Rep, 2023 Jul 27;13(1):12149.
    PMID: 37500697 DOI: 10.1038/s41598-023-39349-2
    Plastic sand paver blocks provide a sustainable alternative by using plastic waste and reducing the need for cement. This innovative approach leads to a more sustainable construction sector by promoting environmental preservation. No model or Equation has been devised that can predict the compressive strength of these blocks. This study utilized gene expression programming (GEP) and multi-expression programming (MEP) to develop empirical models to forecast the compressive strength of plastic sand paver blocks (PSPB) comprised of plastic, sand, and fibre in an effort to advance the field. The database contains 135 results for compressive strength with seven input parameters. The R2 values of 0.87 for GEP and 0.91 for MEP for compressive strength reveal a relatively significant relationship between predicted and actual values. MEP outperformed GEP by displaying a higher R2 and lower values for statistical evaluations. In addition, a sensitivity analysis was conducted, which revealed that the sand grain size and percentage of fibres play an essential part in compressive strength. It was estimated that they contributed almost 50% of the total. The outcomes of this research have the potential to promote the reuse of PSPB in the building of green environments, hence boosting environmental protection and economic advantage.
  12. Ibrahim SM, Kareem OH, Saffanah KM, Adamu AA, Khan MS, Rahman MBA, et al.
    Cryobiology, 2018 06;82:27-36.
    PMID: 29679551 DOI: 10.1016/j.cryobiol.2018.04.012
    The objective of this study was to evaluate the use of Afp1m as a cryopreservative agent for skin by examining the transplanted skin histological architecture and mechanical properties following subzero cryopreservation. Thirty four (34) rats with an average weight of 208 ± 31 g (mean ± SD), were used. Twenty four (n = 24) rats were equally divided into four groups: (i) immediate non-cryopreserved skin autografts (onto same site), (ii) immediate non-cryopreserved skin autografts (onto different sites), (iii) skin autografts cryopreserved with glycerol for 72 h and (iv) skin autografts cryopreserved with Afp1m for 72 h at -4 °C. Rounded shaped full-thickness 1.5-2.5 cm in diameter skin was excised from backs of rats for the autograft transplantation. Non-cryopreserved or cryopreserved auto skin graft were positioned onto the wound defects and stitched. Non-transplanted cryopreserved and non-cryopreserved skin strips from other ten rats (n = 10) were allowed for comparative biomechanical test. All skin grafts were subjected to histological and mechanical examinations at the end of day 21. Histological results revealed that tissue architecture especially the epidermal integrity and dermal-epidermal junction of the Afp1m cryopreserved skin grafts exhibited better histological appearance, good preservation of tissue architecture and structural integrity than glycerolized skin. However, there was no significant difference among these groups in other histological criteria. There were no significant differences among the 4 groups in skin graft mechanical properties namely maximum load. In conclusion, Afp1m were found to be able to preserve the microstructure as well as the viability and function of the skin destined for skin transplantation when was kept at -4 °C for 72 h.
  13. Hye Khan MA, Sattar MA, Abdullah NA, Johns EJ
    Br J Pharmacol, 2008 Mar;153(6):1232-41.
    PMID: 18246093 DOI: 10.1038/bjp.2008.13
    This study investigated whether the alpha(1)-adrenoceptor responsiveness of the renal vasculature was altered in the state of hypertension combined with renal failure.
  14. Husain A, Al-Zahrani SA, Al Otaibi A, Khan I, Mujahid Ali Khan M, Alosaimi AM, et al.
    Polymers (Basel), 2021 May 31;13(11).
    PMID: 34073027 DOI: 10.3390/polym13111829
    Polypyrrole (PPy) and polypyrrole/cerium oxide nanocomposite (PPy/CeO2) were prepared by the chemical oxidative method in an aqueous medium using anhydrous ferric chloride (FeCl3) as an oxidant. The successful formulation of materials was confirmed by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and transmittance electron microscopy (TEM). A four-in-line probe device was used for studying DC electrical conductivity and ammonia vapor sensing properties of PPy and PPy/CeO2. The significant improvement in both the conductivity and sensing parameters of PPy/CeO2 compared to pristine PPy reveals some synergistic/electronic interaction between PPy and cerium oxide nanoparticles (CeO2 NPs) working at molecular levels. The initial conductivity (i.e., conductivity at room temperature) was found to be 0.152 Scm-1 and 1.295 Scm-1 for PPy and PPy/CeO2, respectively. Also, PPy/CeO2 showed much better conductivity retention than pristine PPy under both the isothermal and cyclic ageing conditions. Ammonia vapor sensing was carried out at different concentration (0.01, 0.03, 0.05, 0.1, 0.2, 0.3, 0.4, and 0.5 vol %). The sensing response of PPy/CeO2 varied with varying concentrations. At 0.5 vol % ammonia concentration, the % sensing response of PPy and PPy/CeO2 sensor was found to be 39.1% and 93.4%, respectively. The sensing efficiency of the PPy/CeO2 sensor was also evaluated at 0.4. 0.3, 0.2, 0.1, 0.05, 0.03, and 0.01 vol % ammonia concentration in terms of % sensing response, response/recovery time, reversibility, selectivity as well as stability at room temperature.
  15. Haque M, Islam S, Kamal ZM, Akter F, Jahan I, Rahim MSA, et al.
    Hosp Pract (1995), 2021 Oct;49(4):266-272.
    PMID: 33734004 DOI: 10.1080/21548331.2021.1906083
    BACKGROUND: Prevalence rates of patients with diabetes are growing across countries, and Bangladesh is no exception. Associated costs are also increasing, driven by costs associated with the complications of diabetes including hypoglycemia. Long-acting insulin analogues were developed to reduce hypoglycemia as well as improve patient comfort and adherence. However, they have been appreciably more expensive, reducing their affordability and use. Biosimilars offer a way forward. Consequently, there is a need to document current prescribing and dispensing rates for long-acting insulin analogues across Bangladesh, including current prices and differences, as a result of affordability and other issues.

    METHODS: Mixed method approach including surveying prescribing practices in hospitals coupled with dispensing practices and prices among community pharmacies and drug stores across Bangladesh. This method was adopted since public hospitals only dispense insulins such as soluble insulins free-of-charge until funds run out and all long-acting insulin analogues have to be purchased from community stores.

    RESULTS: There has been growing prescribing and dispensing of long-acting insulins in Bangladesh in recent years, now accounting for over 80% of all insulins dispensed in a minority of stores. This increase has been helped by growing prescribing and dispensing of biosimilar insulin glargine at lower costs than the originator, with this trend likely to continue with envisaged growth in the number of patients. Consequently, Bangladesh can serve as an exemplar to other low- and middle-income countries struggling to fund long-acting insulin analogues for their patients.

    CONCLUSIONS: It was encouraging to see continued growth in the prescribing and dispensing of long-acting insulin analogues in Bangladesh via the increasing availability of biosimilars. This is likely to continue benefitting all key stakeholder groups.

  16. Hammad H, Elbarazi I, Bendak M, Obaideen K, Amanatullah A, Khan BSB, et al.
    J Relig Health, 2024 Jun;63(3):2423-2442.
    PMID: 36058952 DOI: 10.1007/s10943-022-01646-x
    This cross-sectional survey investigates the influence of youths' religiosity on their attitude towards people with disabilities. The Muslim religiosity questionnaire and multidimensional attitudes scale towards persons with disabilities were used to survey 733 youths from the federal university in the United Arab Emirates. The results indicated that the youths were religious and had positive attitudes towards people with disabilities. An increase in religiosity is associated with a positive attitude towards disability, and both religiosity and total family income positively impacted the attitude towards people with disabilities. Reducing inequalities by including persons with disabilities is one of the UN 2030 Agenda for Sustainable Development objectives. Policies should aim to enhance curriculum, improvise public guidelines and partner with associated faith-based leaders to build an inclusive society for people with disabilities, thus helping to achieve sustainable development goals.
  17. Hakami AAH, Wabaidur SM, Ali Khan M, Abdullah Alothman Z, Rafatullah M, Siddiqui MR
    Molecules, 2020 Oct 06;25(19).
    PMID: 33036289 DOI: 10.3390/molecules25194564
    Lower dye concentrations and the presence of several dyes along with other matrices in environmental samples restrict their determination. Herein, a highly sensitive and rapid ultra-performance tandem mass spectrometric method was developed for simultaneous determination of cationic dyes, namely methylene blue (MB), rhodamine B (RB) and crystal violet (CV), in environmental samples. To preconcentrate environmental samples, solid-phase extraction cartridges were developed by using hydrogen peroxide modified pistachio shell biomass (MPSB). The surface morphological and chemical functionalities of MPSB were well characterized. The developed method was validated considering different validation parameters. In terms of accuracy and precision, the %RSD for all three dyes at all four concentration points was found to be between 1.26 and 2.76, while the accuracy reported in terms of the recovery was found to be 98.02%-101.70%. The recovery was found to be in the range of 98.11% to 99.55%. The real sample analysis shows that MB, RB, and CV were found in the ranges of 0.39-5.56, 0.32-1.92 and 0.27-4.36 μg/mL, respectively.
  18. Gupta N, Yadav KK, Kumar V, Krishnan S, Kumar S, Nejad ZD, et al.
    Environ Toxicol Pharmacol, 2021 Feb;82:103563.
    PMID: 33310081 DOI: 10.1016/j.etap.2020.103563
    This study determined the heavy metals (HMs) accumulation in different vegetables in different seasons and attributed a serious health hazard to human adults due to the consumption of such vegetables in Jhansi. The total amounts of zinc (Zn), lead (Pb), nickel (Ni), manganese (Mn), copper (Cu), cobalt (Co), and cadmium (Cd) were analysed in 28 composite samples of soil and vegetables (Fenugreek, spinach, eggplant, and chilli) collected from seven agricultural fields. The transfer factor (TF) of HMs from soil to analysed vegetables was calculated, and significant non-carcinogenic health risks due to exposure to analysed heavy metals via consumption of these vegetables were computed. The statistical analysis involving Principal Component Analysis (PCA) and Pearson's correlation matrix suggested that anthropogenic activities were a major source of HMs in the study areas. The target hazard quotient of Cd, Mn, and Pb for fenugreek (2.156, 2.143, and 2.228, respectively) and spinach (3.697, 3.509, 5.539, respectively) exceeded the unity, indicating the high possibilities of non-carcinogenic health risks if regularly consumed by human beings. This study strongly suggests the continuous monitoring of soil, irrigation water, and vegetables to prohibit excessive accumulation in the food chain.
  19. Godman B, Haque M, Kumar S, Islam S, Charan J, Akter F, et al.
    Curr Med Res Opin, 2021 09;37(9):1529-1545.
    PMID: 34166174 DOI: 10.1080/03007995.2021.1946024
    INTRODUCTION: Prevalence rates for diabetes mellitus continue to rise, which, coupled with increasing costs of complications, has appreciably increased expenditure in recent years. Poor glycaemic control including hypoglycaemia enhances complication rates and associated morbidity, mortality and costs. Consequently, this needs to be addressed. Whilst the majority of patients with diabetes have type-2 diabetes, a considerable number of patients with diabetes require insulin to help control their diabetes. Long-acting insulin analogues were developed to reduce hypoglycaemia associated with insulin and help improve adherence, which can be a concern. However, their considerably higher costs have impacted on their funding and use, especially in countries with affordability issues. Biosimilars can help reduce the costs of long-acting insulin analogues thereby increasing available choices. However, the availability and use of long-acting insulin analogues can be affected by limited price reductions versus originators and limited demand-side initiatives to encourage their use. Consequently, we wanted to assess current utilisation rates for long-acting insulin analogues, especially biosimilars, and the rationale for patterns seen, across multiple Asian countries ranging from Japan (high-income) to Pakistan (lower-income) to inform future strategies.

    METHODOLOGY: Multiple approaches including assessing utilization and prices of insulins including biosimilars among six Asian countries and comparing the findings especially with other middle-income countries.

    RESULTS: Typically, there was increasing use of long-acting insulin analogues among the selected Asian countries. This was especially the case enhanced by biosimilars in Bangladesh, India, and Malaysia reflecting their perceived benefits. However, there was limited use in Pakistan due to issues of affordability similar to a number of African countries. The high use of biosimilars in Bangladesh, India and Malaysia was helped by issues of affordability and local production. The limited use of biosimilars in Japan and Korea reflects limited price reductions and demand-side initiatives similar to a number of European countries.

    CONCLUSIONS: Increasing use of long-acting insulin analogues across countries is welcomed, adding to the range of insulins available, which increasingly includes biosimilars. A number of activities are needed to enhance the use of long-acting insulin analogue biosimilars in Japan, Korea and Pakistan.

  20. Godman B, Haque M, Leong T, Allocati E, Kumar S, Islam S, et al.
    Front Public Health, 2021;9:671961.
    PMID: 34249838 DOI: 10.3389/fpubh.2021.671961
    Background: Diabetes mellitus rates continue to rise, which coupled with increasing costs of associated complications has appreciably increased global expenditure in recent years. The risk of complications are enhanced by poor glycaemic control including hypoglycaemia. Long-acting insulin analogues were developed to reduce hypoglycaemia and improve adherence. Their considerably higher costs though have impacted their funding and use. Biosimilars can help reduce medicine costs. However, their introduction has been affected by a number of factors. These include the originator company dropping its price as well as promoting patented higher strength 300 IU/ml insulin glargine. There can also be concerns with different devices between the manufacturers. Objective: To assess current utilisation rates for insulins, especially long-acting insulin analogues, and the rationale for patterns seen, across multiple countries to inform strategies to enhance future utilisation of long-acting insulin analogue biosimilars to benefit all key stakeholders. Our approach: Multiple approaches including assessing the utilisation, expenditure and prices of insulins, including biosimilar insulin glargine, across multiple continents and countries. Results: There was considerable variation in the use of long-acting insulin analogues as a percentage of all insulins prescribed and dispensed across countries and continents. This ranged from limited use of long-acting insulin analogues among African countries compared to routine funding and use across Europe in view of their perceived benefits. Increasing use was also seen among Asian countries including Bangladesh and India for similar reasons. However, concerns with costs and value limited their use across Africa, Brazil and Pakistan. There was though limited use of biosimilar insulin glargine 100 IU/ml compared with other recent biosimilars especially among European countries and Korea. This was principally driven by small price differences in reality between the originator and biosimilars coupled with increasing use of the patented 300 IU/ml formulation. A number of activities were identified to enhance future biosimilar use. These included only reimbursing biosimilar long-acting insulin analogues, introducing prescribing targets and increasing competition among manufacturers including stimulating local production. Conclusions: There are concerns with the availability and use of insulin glargine biosimilars despite lower costs. This can be addressed by multiple activities.
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links