Unprocessed ‘budu’ is a mixture of anchovies and salt that has been fermented for a period of time, and has not been heat-treated nor formulated with additional ingredients. This study analyzed Malaysian
unprocessed ‘budu’ from 12 producers for microbiological, salt, protein, histamine and 3-MCPD contents.
The results demonstrated that Malaysian unprocessed ‘budu’ were free from pathogenic Coliform, E. coli,
V. parahaemolyticus and V. cholerae contaminations. Carcinogenic 3-MCPD was below detection level of 2 ppb for all 12 samples tested. However, 58% of the unprocessed ‘budu’ had histamine content greater than the hazardous levels of 50 mg/100 g sample.
Kefir is a fermented milk obtained by fermenting milk with kefir grains. The chemical composition ofdairy and non-dairy sources may affect the growth and characterisation of lactic acid bacteria (LAB). In this study, different sources of milk (cow milk) and non-dairy milk (soymilk and coconut milk) were used as the fermentation media for kefir products. The objectives of the study were to isolate and characterise LAB from kefir drink produced from dairy and non-dairy milk. LAB was isolated using different cultural methods, such as MRS Agar, MRS with 0.8% CaCO3, and M17 Agar. The characteristics of the LAB isolates were determined using morphological, biochemical tests and the API 50 CHL kit. The physicochemical composition of the samples was determined using titratable acidity and pH level. Sensory evaluation of the kefir drink samples was also carried out. Results confirmed that the isolates were identified as Lactobacillus buchneri, Lactobacillus brevis 1, Leuconostoc mesenteroides, Lactobacillus acidophilus 3and Lactobacillus plantarum 1. The L. buchneri, L. brevis, Leu. mesenteroides and L. acidophilus are heterofermentative bacteria, whereas L. plantarum is a homofermentative bacterium. Four LAB isolates have the potential to be used as probiotic strains due to their high resistant to low pH and bile salt. The sensory scores of these products range between 5.00 and 8.00 in the 9-point hedonic scale. Most of the sensory panelists preferred cow milk kefir (p < 0.05) compared with coconut milk kefir and soy milk kefir during the sensory evaluation of all attributes. Meanwhile, the preference between coconut milk kefir and soy milk kefir was similar (p>0.05) in all attributes. Therefore, this study will be useful for probiotic manufacturers in the production of alternative probiotic drinks using dairy and non-dairy milk.
In recent years, many efforts have been directed to explore the methods to reduce the production costs of industrial lipase by improving the yield and the use of low-cost agricultural wastes. Coconut dregs, which is a lignocellulosic by-product from coconut oil and milk processing plants, is rich in cellulose (36%) and crude fat (9%). A newly isolated Bacillus stratosphericus has been demonstrated to perform cellulose hydrolysis on coconut dregs producing fermentable sugars. The highest extracellular lipase activity of 140 U/mL has been achieved in submerged fermentation with acid pre-treated coconut dregs. The lipase was found to be active over a wide range of temperatures and pHs. The activity of lipase can be generally increased by the presence of detergent ingredients such as Tween-80, cetyltrimethylammonium bromide, hydrogen peroxide and phosphate per sulphate. The great compatibility of lipase in commercial detergents has also underlined its potential as an additive ingredient in biodetergent formulations.
Fermentation employing lactic acid bacteria (LAB) often suffers end-product inhibition which reduces the cell growth rate and the production of metabolite. The utility of adsorbent resins for in situ lactic acid removal to enhance the cultivation performance of probiotic, Pediococcus acidilactici was studied. Weak base anion-exchange resin, Amberlite IRA 67 gave the highest maximum uptake capacity of lactic acid based on Langmuir adsorption isotherm (0.996 g lactic acid/g wet resin) compared to the other tested anion-exchange resins (Amberlite IRA 410, Amberlite IRA 400, Duolite A7 and Bowex MSA). The application of Amberlite IRA 67 improved the growth of P. acidilactici about 67 times compared to the control fermentation without resin addition. Nevertheless, the in situ addition of dispersed resin in the culture created shear stress by resins collision and caused direct shear force to the cells. The growth of P. acidilactici in the integrated bioreactor-internal column system containing anion-exchange resin was further improved by 1.4 times over that obtained in the bioreactor containing dispersed resin. The improvement of the P. acidilactici growth indicated that extractive fermentation using solid phase is an effective approach for reducing by-product inhibition and increasing product titer.
Improvement in the butanol production selectivity or enhanced butanol:acetone ratio (B:A) is desirable in acetone-butanol-ethanol (ABE) fermentation by Clostridium strains. In this study, artificial electron carriers were added to the fermentation medium of a new isolate of Clostridium acetobutylicum YM1 in order to improve the butanol yield and B:A ratio. The results revealed that medium supplementation with electron carriers changed the metabolism flux of electron and carbon in ABE fermentation by YM1. A decrease in acetone production, which subsequently improved the B:A ratio, was observed. Further improvement in the butanol production and B:A ratios were obtained when the fermentation medium was supplemented with butyric acid. The maximum butanol production (18.20 ± 1.38 g/L) was gained when a combination of methyl red and butyric acid was added. Although the addition of benzyl viologen (0.1 mM) and butyric acid resulted in high a B:A ratio of 16:1 (800% increment compared with the conventional 2:1 ratio), the addition of benzyl viologen to the culture after 4 h resulted in the production of 18.05 g/L butanol. Manipulating the metabolic flux to butanol through the addition of electron carriers could become an alternative strategy to achieve higher butanol productivity and improve the B:A ratio.
The effect of pH and butyric acid supplementation on the production of butanol by a new local isolate of Clostridium acetobutylicum YM1 during batch culture fermentation was investigated. The results showed that pH had a significant effect on bacterial growth and butanol yield and productivity. The optimal initial pH that maximized butanol production was pH 6.0 ± 0.2. Controlled pH was found to be unsuitable for butanol production in strain YM1, while the uncontrolled pH condition with an initial pH of 6.0 ± 0.2 was suitable for bacterial growth, butanol yield and productivity. The maximum butanol concentration of 13.5 ± 1.42 g/L was obtained from cultures grown under the uncontrolled pH condition, resulting in a butanol yield (YP/ S ) and productivity of 0.27 g/g and 0.188 g/L h, respectively. Supplementation of the pH-controlled cultures with 4.0 g/L butyric acid did not improve butanol production; however, supplementation of the uncontrolled pH cultures resulted in high butanol concentrations, yield and productivity (16.50 ± 0.8 g/L, 0.345 g/g and 0.163 g/L h, respectively). pH influenced the activity of NADH-dependent butanol dehydrogenase, with the highest activity obtained under the uncontrolled pH condition. This study revealed that pH is a very important factor in butanol fermentation by C. acetobutylicum YM1.
Lactic acid bacteria is well known for it uses as starter culture in various fermented food, and it functions as a good natural antimicrobial agent. Cincaluk, a Malaysian fermented shrimp product commonly found in traditional dishes is commonly enriched with LAB. Out of 50 colonies from a local cincaluk, 7 strains were successfully isolated and shown to be positive in lactose utilization and catalase tests. The majority of the isolates from cincaluk showed Gram-positive cocci morphology and belonged to the group Staphyloccoccus spp. By using agar disc diffusion method, the anti-bacterial properties of these isolates (namely isolate 1, 2, 3, 4, 5, 6, and 7) moderately inhibited the growth of several pathogenic strains, i.e., Escherichia coli, Staphylococcus aureus, Salmonella typhimurium and Bacillus subtilis which were used as indicator bacteria. Other than isolates 1, 2, 3 and 5; the 16S rRNA gene for isolate 6 and 7 were successfully amplified. The 16S rRNA gene fragment from isolate 7 was successfully cloned and sequenced. Based on rRNA sequences, both isolates 6 and 7 belonged to the group Staphylococcus piscifermentans, a rare strain previously reported to be specifically isolated exclusive from fish sources.
There is an increasing demand for natural food preservatives due to consumers' concern on the negative effects of chemical preservatives in food products. Nisin (bacteriocin) is an effective food biopreservative that has been approved globally. However, its low yield proves to be a limiting factor and must be addressed to meet the increasingly high demand from the food industry. The present work thus investigated the effects of individual and combined fermentation factors on Lactococcus lactis ATCC 11454 growth and nisin activity using the one-factor-at-a-time (OFAT) method. The level of each factor that gave the highest nisin production was then selected and combined to further improve its activity. The best combined conditions for highest cell growth and nisin activity were 30 °C, pH 6.0, and mild agitation with the addition of 1.0% w/v glucose, 1.0% w/v skim milk, and 0.5% v/v Tween 20. This increased nisin production by 22.7% as compared to control (basic condition). The present work provided critical information on the relationship between fermentation conditions, growth, and nisin activity of L. lactis ATCC 11454 that could be explored to understand the potential and limitation of the strain. This fermentation strategy can also serve as a benchmark to further enhance the production of bacteriocin or other biopreservative compounds.
Sweatings, the exudates that leach out from fermenting fruits during rambutan fruit fermentation are considered as
a waste by-product and are allowed to be drained off. This could lead to a pollution problem. Besides, it is a waste if
the sweatings are possible to be transformed into food products and ingredients. However, prior transformation, the
fundamental knowledge of the sweatings should be understood. Hence, the main aim of this study was to investigate
the physicochemical properties of sweatings as affected by fermentation time and turning intervals during natural
fermentation of rambutan fruits. In this study, peeled rambutan fruit was fermented for 8 days and turned. Different
batches of the fruits were turned every 24, 48 or 72 h and sweatings from the process were collected and analyzed.
The results showed that fermentation time significantly reduced (p<0.05) the yield, pH and sucrose content of the
sweatings by 79-84%, 32-33%, 76.5-80.8%, respectively. Fermentation time also significantly increased (p<0.05) the
titratable acidity, total soluble solids, fructose, glucose, total sugar, citric acid, lactic acid, acetic acid and ascorbic
acid contents of the sweatings by 5.6-6.0, 1.5-1.6, 2.4-2.6, 2.1-2.5, 1.0-1.1, 5.7-6.5, 2.4-2.6, 2.1-2.5 and 2.6-2.8 folds,
respectively. However, turning intervals did not significantly affect (p>0.05) the physicochemical properties of the
sweatings. High concentrations of sugars and organic acids allow the sweatings to have a balance of sweet and sour
taste and they are suitable to be used in the production of syrup, soft drinks, jam, jelly, marmalade and vinegar.
The advantage of cooking cannot be summarized just as the better food digestion. Some investigations showed the effect of cooking on reduction of food anti-nutrients such as oxalate. This study was aimed to determine the effect of cooking on oxalate content and its negative effects on calcium availability in eight Malaysian soy-based dishes. Since there is few data which examined the effects of cooking on food oxalate content globally, thus this study was designed as the first in Malaysia. Oxalate in this research was analyzed by using enzymatic methods, while calcium content was determined by using Atomic Absorption Spectrophotometer. The oxalate concentration was in the range of 6.43-19.40 mg/100 g for whole cooked samples, 9.03-11.90 mg/100 g for raw soy products, and 4.36-7.99 mg/100 g for cooked ones. There were 5 out of 12 samples containing oxalate, which was significantly lower (p < 0.05) in cooked products compared to the raw ones. The rest of the samples were also lower in oxalate but not significantly different (p > 0.05). Oxalate in raw/cooked fermented soy products (tempeh) was slightly lower compared to the non-fermented ones. However, there was no significant difference (p > 0.05) in oxalate amount between fermented and non-fermented soy products. As Oxalate/Calcium ratio was below 1, oxalate did not have an effect on availability of calcium in the studied samples. Optimal cooking and food processing might be effective in reducing oxalate content in soy products. There is a need for more investigations about the effect of cooking on soy products to confirm the present results.
Acetone-butanol-ethanol (ABE) production from renewable resources has been widely reported. In this study, Clostridium butyricum EB6 was employed for ABE fermentation using fermentable sugar derived from treated oil palm empty fruit bunch (OPEFB). A higher amount of ABE (2.61 g/l) was produced in a fermentation using treated OPEFB as the substrate when compared to a glucose based medium that produced 0.24 g/l at pH 5.5. ABE production was increased to 3.47 g/l with a yield of 0.24 g/g at pH 6.0. The fermentation using limited nitrogen concentration of 3 g/l improved the ABE yield by 64%. The study showed that OPEFB has the potential to be applied for renewable ABE production by C. butyricum EB6.
In this paper, we report that pressed juice from oil palm frond (OPF) contained renewable sugars such as glucose, sucrose and fructose. By using a simple sugarcane press, 50% (wt/wt) of OPF juice was obtained from fresh OPF. The glucose content in the juice was 53.95±2.86g/l, which accounts for 70% of the total free sugars. We have examined the effect of various OPF juice concentrations on the production of poly(3-hydroxybutyrate), P(3HB) by Cupriavidus necator CCUG 52238(T). The cell dry mass in shake flask experiment reached 8.42g/l, with 32wt.% of P(3HB) at 30% (v/v) of OPF juice, comparable with using technical grade sugars. The biopolymer had a molecular mass, M(w) of 812kDa, with a low polydispersity index of 1.61. This result indicates that OPF juice can be used as an alternative renewable carbon source for P(3HB) production and has potential as a renewable carbon source.
Bioconverting glycerol into various valuable products is one of glycerol's promising applications due to its high availability at low cost and the existence of many glycerol-utilizing microorganisms. Bioethanol and biohydrogen, which are types of renewable fuels, are two examples of bioconverted products. The objectives of this study were to evaluate ethanol production from different media by local microorganism isolates and compare the ethanol fermentation profile of the selected strains to use of glucose or glycerol as sole carbon sources. The ethanol fermentations by six isolates were evaluated after a preliminary screening process. Strain named SS1 produced the highest ethanol yield of 1.0 mol: 1.0 mol glycerol and was identified as Escherichia coli SS1 Also, this isolated strain showed a higher affinity to glycerol than glucose for bioethanol production.
The oil palm sector is one of the major plantation industries in Malaysia. Palm kernel cake is a byproduct of extracted palm kernel oil. Mostly palm kernel cake is wasted or is mixed with other nutrients and used as animal feed, especially for ruminant animals. Recently, palm kernel cake has been identified as an important ingredient for the formulation of animal feed, and it is also exported especially to Europe, South Korea, and Japan. It can barely be consumed by nonruminant (monogastric) animals owing to the high percentages of hemicellulose and cellulose contents. Palm kernel cake must undergo suitable pretreatment in order to decrease the percentage of hemicellulose and cellulose. One of the methods employed in this study is fermentation with microorganisms, particularly fungi, to partially degrade the hemicellulose and cellulose content. This work focused on the production of enzymes by Aspergillus niger and profiling using palm kernel cake as carbon source.
Biohydrogen production from dark fermentation of lignocellulosic materials represents a huge potential in terms of renewable energy exploitation. However, the low hydrogen yield is currently hindering its development on industrial scale. This study reviewed various technologies that have been investigated for enhancing dark fermentative biohydrogen production. The pre-treatment technologies can be classified based on their applications as inoculum or substrates pre-treatment or they can be categorised into physical, chemical, physicochemical and biological based on the techniques used. From the different technologies reviewed, heat and acid pre-treatments are the most commonly studied technologies for both substrates and inoculum pre-treatment. Nevertheless, these two technologies need not necessarily be the most suitable since across different studies, a wide array of other emerging techniques as well as combined technologies have yielded positive findings. To date, there exists no perfect technology for either inoculum or substrate pre-treatment. Although the aim of inoculum pre-treatment is to suppress H2-consumers and enrich H2-producers, many sporulating H2-consumers survive the pre-treatment while some non-spore H2-producers are inhibited. Besides, several inoculum pre-treatment techniques are not effective in the long run and repeated pre-treatment may be required for continuous suppression of H2-consumers and sustained biohydrogen production. Furthermore, many technologies employed for substrates pre-treatment may yield inhibitory compounds that can eventually decrease biohydrogen production. Consequently, much research needs to be done to find out the best technology for both substrates and inoculum pre-treatment while also taking into consideration the energetic, economic and technical feasibility of implementing such a process on an industrial scale.
Malaysia is the second largest palm oil producer in the world and this industry generates more than 80 million tonnes of biomass every year. When considering the potential of this biomass to be used as a fermentation feedstock, many studies have been conducted to develop a complete process for sugar production. One of the essential processes is the pre-treatment to modify the lignocellulosic components by altering the structural arrangement and/or removing lignin component to expose the internal structure of cellulose and hemicellulose for cellulases to digest it into sugars. Each of the pre-treatment processes that were developed has their own advantages and disadvantages, which are reviewed in this study.
This study was conducted to evaluate the potential of pineapple peel (PP) and pineapple crown leaves (PCL) as the substrate for vanillic acid and vanillin production. About 202 ± 18 mg L-1 and 120 ± 11 mg L-1 of ferulic acid was produced from the PP and PCL respectively. By applied response surface methodology, the ferulic acid yield was increased to 1055 ± 160 mg L-1 by treating 19.3% of PP for 76 min, and 328 ± 23 mg L-1 by treating 9.9% of PCL for 36 min in aqueous sodium hydroxide solution at 120 °C. The results revealed that PP extract was better than PCL extract for vanillic acid and vanillin production. Furthermore, the experiment also proved that large volume feeding was more efficient than small volume feeding for high vanillic acid and vanillin yield. Through large volume feeding, about 7 ± 2 mg L-1 of vanillic acid and 5 ± 1 mg L-1 of vanillin was successfully produced from PP extract via Aspergillus niger fermentation.
Probiotic organism Bifidobacteria was isolated from the faeces of breast-fed infants at Universiti Putra Malaysia. Trypticase phytone peptone yeast extract agar (TPY) was used as a selective media for the isolation. Morphological examination of the isolates indicated that Bifidobacteria was Gram-positive rods in nature, curved with characteristics of V and Y shapes. The organisms were non-catalase producing, non-nitrate reducing, non-motile, had an absence of indole and were unable to liquify gelatin. The ratios of acetic and lactic acids were determined using high performance liquid chromatography (HPLC). Using carbohydrate fermentation profile test API-CH-50 kits, 20 Bifidobacteria strains had been identified: they were the species of Bifidobacteria infantis and two different sub-species, mainly infantis and lacentis. Based on a wide zone of inhibition, three suitable strains of B. infantis, Bifi-11, Bifi-19 and Bifi-20, were tested in weaning foods for antimicrobial activity towards two human pathogens: E. coli-0157 (World Health Organization) and Salmonella typhimurium S-285. The pH, titratable acidity of weaning foods and total colony count for Bifidobacteria, enteropathogenic Escherichia coli and S. typhimurium were recorded at 3-h intervals for 30 h. It was found that after 9 h of incubation of weaning foods, the pH declined to < 3.6 from pH 6.0, whereas titratable acidity increased from 0.026 to 0.08%. It was indicated that Bifidobacteria inhibited E. coli better than did S typhimurium due to low pH. After 24 h of incubation, approximately 98% of E. coli was inhibited by Bifidobacteria. It is suggested that the inhibitory effect of Bifidobacteria strains in weaning foods towards the growth of enteropathogenic E. coli and S. typhimurium was solely due to low pH and the production of volatile acid components by the organism.
The utilisation of palm oil and its fractions by Penicillium chrysogenum for growth and penicillin production is strain-dependent. Strain H1107 could utilise crude palm oil, its liquid (palm olein) and solid (palm stearin) fractions and its component fatty acids (oleic, palmitic, stearic and myristic) as the main carbon source; strain M223 could not. Cell-bound lipase activity was higher in H1107 than in M223.
Molecular weights (MWs) and their chemical structures are the primary factors determining the influence of condensed tannins (CTs) on animal nutrition and methane (CH4 ) production in ruminants. In this study the MWs of five CT fractions from Leucaena leucocephala hybrid-Rendang (LLR) were determined and the CT fractions were investigated for their effects on CH4 production and rumen fermentation.