Displaying publications 121 - 140 of 307 in total

Abstract:
Sort:
  1. Amiri A, Ahmadi G, Shanbedi M, Savari M, Kazi SN, Chew BT
    Sci Rep, 2015;5:17503.
    PMID: 26643279 DOI: 10.1038/srep17503
    Capacitive deionization (CDI) is a promising procedure for removing various charged ionic species from brackish water. The performance of graphene-based material in capacitive deionization is lower than the expectation of the industry, so highly-crumpled, few-layered graphene (HCG) and highly-crumpled nitrogen-doped graphene (HCNDG) with high surface area have been introduced as promising candidates for CDI electrodes. Thus, HCG and HCNDG were prepared by exfoliation of graphite in the presence of liquid-phase, microwave-assisted methods. An industrially-scalable, cost-effective, and simple approach was employed to synthesize HCG and HCNDG, resulting in few-layered graphene and nitrogen-doped graphene with large specific surface area. Then, HCG and HCNDG were utilized for manufacturing a new class of carbon nanostructure-based electrodes for use in large-scale CDI equipment. The electrosorption results indicated that both the HCG and HCNDG have fairly large specific surface areas, indicating their huge potential for capacitive deionization applications.
    Matched MeSH terms: Microwaves
  2. Faruque MR, Hossain MI, Misran N, Singh M, Islam MT
    PLoS One, 2015;10(11):e0142663.
    PMID: 26599584 DOI: 10.1371/journal.pone.0142663
    A metamaterial-embedded planar inverted-F antenna (PIFA) is proposed in this study for cellular phone applications. A dual-band PIFA is designed to operate both GSM 900 MHz and DCS 1800 MHz. The ground plane of a conventional PIFA is modified using a planar one-dimensional metamaterial array. The investigation is performed using the Finite Integration Technique (FIT) of CST Microwave Studio. The performance of the developed antenna was measured in an anechoic chamber. The specific absorption rate (SAR) values are calculated considering two different holding positions: cheek and tilt. The SAR values are measured using COMOSAR measurement system. Good agreement is observed between the simulated and measured data. The results indicate that the proposed metamaterial-embedded antenna produces significantly lower SAR in the human head compared to the conventional PIFA. Moreover, the modified antenna substrate leads to slight improvement of the antenna performances.
    Matched MeSH terms: Microwaves
  3. Ahmad AF, Abbas Z, Obaiys SJ, Ibrahim N, Hashim M, Khaleel H
    PLoS One, 2015;10(10):e0140505.
    PMID: 26474301 DOI: 10.1371/journal.pone.0140505
    Bio-composites of oil palm empty fruit bunch (OPEFB) fibres and polycaprolactones (PCL) with a thickness of 1 mm were prepared and characterized. The composites produced from these materials are low in density, inexpensive, environmentally friendly, and possess good dielectric characteristics. The magnitudes of the reflection and transmission coefficients of OPEFB fibre-reinforced PCL composites with different percentages of filler were measured using a rectangular waveguide in conjunction with a microwave vector network analyzer (VNA) in the X-band frequency range. In contrast to the effective medium theory, which states that polymer-based composites with a high dielectric constant can be obtained by doping a filler with a high dielectric constant into a host material with a low dielectric constant, this paper demonstrates that the use of a low filler percentage (12.2%OPEFB) and a high matrix percentage (87.8%PCL) provides excellent results for the dielectric constant and loss factor, whereas 63.8% filler material with 36.2% host material results in lower values for both the dielectric constant and loss factor. The open-ended probe technique (OEC), connected with the Agilent vector network analyzer (VNA), is used to determine the dielectric properties of the materials under investigation. The comparative approach indicates that the mean relative error of FEM is smaller than that of NRW in terms of the corresponding S21 magnitude. The present calculation of the matrix/filler percentages endorses the exact amounts of substrate utilized in various physics applications.
    Matched MeSH terms: Microwaves*
  4. Habib Ullah M, Mahadi WN, Latef TA
    Sci Rep, 2015;5:12868.
    PMID: 26238975 DOI: 10.1038/srep12868
    Polybutylene succinate (PBS) has become a potential candidate, similar to polypropylene (PP) and acrylonitrile butadiene styrene (ABS), for use as an organic plastic material due to its outstanding mechanical properties as well as high thermal deformation characteristics. A new composition of silica aerogel nanoparticles extracted from rice waste with PBS is proposed for use as a dielectric (εr = 4.5) substrate for microwave applications. A microstrip patch antenna was fabricated on the proposed dielectric substrate for multi-resonant ultra-wideband (UWB) applications. The performance characteristics of the proposed biomaterial-based antenna were investigated in a far-field measurement environment. The results indicate that the proposed biocompatible material-based antenna covered a bandwidth of 9.4 (2.3-11.7) GHz with stop bands from 5.5 GHz to 5.8 GHz and 7.0 GHz to 8.3 GHz. Peak gains of 9.82 dBi, 7.59 dBi, 8.0 dBi and 7.68 dBi were measured at resonant frequencies of 2.7 GHz, 4.6 GHz, 6.3 GHz and 9.5 GHz, respectively.
    Matched MeSH terms: Microwaves
  5. Nyam, K.L., Tan, C.H., Long, K.
    MyJurnal
    The aim of this study was to investigate the oxidative stability, antioxidant activity and fatty acid composition of 2 minutes microwave pre-treated kenaf seed oil (MKSO) in comparison with the untreated kenaf seed oil (KSO) under accelerated storage for 24 days. Results obtained on oxidative stability for both KSO and MKSO by the end of storage with PV were 9.83 meq O2 /kg and 8.97 meq O2 /kg, respectively; p-Anv were 17.28 and 13.48, respectively; TOTOX value of 36.94 and 31.42, respectively; IV value were measured 84.50 g of I2 / 100 g and 84.34 g of I2 / 100 g oil, respectively; FFA value of 5.67 mg KOH/100g oil and 5.14 mg KOH/100g oil, respectively. Aside from that, the antioxidant activity in MKSO was better than KSO. For the fatty acid composition, the oleic and linoleic acids were affected significantly throughout storage for both KSO and MKSO. MKSO presented a better overall oxidative stability, antioxidant activity and retained higher content of MUFA and PUFA significantly (p< 0.05) upon accelerated storage.
    Matched MeSH terms: Microwaves
  6. Lusia Barek, M., Hasmadi, M., Zaleha, A.Z., Mohd Fadzelly, A.B.
    MyJurnal
    Clinacanthus nutans (Burm. F.) Lindau or locally known in Sabah, Malaysia as ‘Sabah Snake Grass’ has been ethnobotanically used to treat various diseases in Asian countries. This study was conducted to determine the total phenolics content (TPC), flavonoids content (TFC) and antioxidant activity of herbal teas developed from C. nutans leaves with different drying techniques (microwave-oven dried and freeze dried) and infusion time (1, 2, 5, 10, 15 and 20 min). Ferric reducing/antioxidant power (FRAP) assay, 2,2’-azino-bis(3-ethylbenzothiazoline- 6-sulphonic acid (ABTS) and 2, 2-diphenyl-1-pycryl-hydrazyl (DPPH) free radical scavenging assays were used to investigate the antioxidant capacity. The highest TPC of herbal tea was observed in 20 min infusion of unfermented microwave-oven dried leaves (177.80 ± 19.10 mg TAE/L), while the highest TFC was observed in 10 min infusion of fermented microwave-oven dried leaves (22.13 ± 1.53 mg CE/L). Short infusion times from 5 min to 15 min were able to extract high amount of phenolics compounds. Unfermented tea contained higher TPC content (P < 0.05) as compared to fermented tea, while, TFC showed no significant difference between both types. Freeze dried infusion shows no significant difference (P > 0.05) as compared to microwave-oven dried for TPC, TFC and antioxidant capacity. Moderate and low correlation was observed between TPC and FRAP values (r = 0.507) and between TFC and ABTS values (r = 0.256). Preparation of C. nutans herbal tea as potential natural antioxidant source can be used as a basic reference for future research on the dietary intake of these herbal teas.
    Matched MeSH terms: Microwaves
  7. Rahmati, S., Abdullah, A., Momeny, E., Kang, O.L.
    MyJurnal
    Optimization of microwave assisted extraction of dragon fruit peel pectin was conducted using respond surface methodology. Effect of extraction conditions, i.e. pH value (X1), extraction time (X2) and solid-liquid ratio (X3) on the extraction yield was investigated using a central composite experimental design. Optimization of microwave assisted extraction was performed and three-dimensional (3D) response surface plots were derived from the mathematical models. Analysis of variance (ANOVA) was conducted and indicated a significant interaction between extraction conditions (pH value and extraction time) and extraction yield. The optimum conditions of microwave assisted extraction were as follows: X1 = 2.07; X2 = 65 s and X3 = 66.57. The verification test on pectin extraction was performed and revealed a perfect agreement between experimental and predicted values. The maximum predicted yield of pectin extraction was 18.53%. Overall, application of microwave assisted extraction can give rise to high quality dragon fruit peel pectin.
    Matched MeSH terms: Microwaves
  8. M. Abbas Ali, Rafiqqah binti Mohamad Sabri, Khu Say Li, Nik Azmi Nik Mahmood
    Sains Malaysiana, 2015;44:1159-1166.
    The efficacy of pandan leaf extract (PLE) addition on the oxidative degradation of sunflower oil (SFO) during microwave heating was studied. 80% of methanol extract showed better antioxidant action than the 100% methanol or ethanol extract and the total phenolic contents, DPPH radical scavenging activity and linoleic acid system of PLE were found to be 1845.50 mg GAE/100 g, 60.62-89.87% and 82.21%, respectively. 80% of methanolic extracts at different concentrations (0.1, 0.2 and 0.4 wt. %) were added to SFO. The antioxidant treated and control oil samples were subjected to microwave heating and were analyzed at regular intervals for the extent of oxidative changes following the measurements of peroxide value, p-anisidine value, TOTOX, free fatty acid, specific extinction, iodine value, viscosity, polar compounds and fatty acid composition. The PLE were found to be quite effective towards suppressing the primary and secondary oxidation products in the tested oil. The order of effectiveness (p<0.05) was BHA > 0.4% PLE > 0.2% PLE > 0.1% PLE > control. The present results suggested that antioxidant extract from pandan leaf might be used to protect vegetable oils from oxidation.
    Matched MeSH terms: Microwaves
  9. Balaji A, Jaganathan SK, Supriyanto E, Muhamad II, Khudzari AZ
    Int J Nanomedicine, 2015;10:5909-23.
    PMID: 26425089 DOI: 10.2147/IJN.S84307
    Developing multifaceted, biocompatible, artificial implants for tissue engineering is a growing field of research. In recent times, several works have been reported about the utilization of biomolecules in combination with synthetic materials to achieve this process. Accordingly, in this study, the ability of an extract obtained from Aloe vera, a commonly used medicinal plant in influencing the biocompatibility of artificial material, is scrutinized using metallocene polyethylene (mPE). The process of coating dense fibrous Aloe vera extract on the surface of mPE was carried out using microwaves. Then, several physicochemical and blood compatibility characterization experiments were performed to disclose the effects of corresponding surface modification. The Fourier transform infrared spectrum showed characteristic vibrations of several active constituents available in Aloe vera and exhibited peak shifts at far infrared regions due to aloe-based mineral deposition. Meanwhile, the contact angle analysis demonstrated a drastic increase in wettability of coated samples, which confirmed the presence of active components on glazed mPE surface. Moreover, the bio-mimic structure of Aloe vera fibers and the influence of microwaves in enhancing the coating characteristics were also meticulously displayed through scanning electron microscopy micrographs and Hirox 3D images. The existence of nanoscale roughness was interpreted through high-resolution profiles obtained from atomic force microscopy. And the extent of variations in irregularities was delineated by measuring average roughness. Aloe vera-induced enrichment in the hemocompatible properties of mPE was established by carrying out in vitro tests such as activated partial thromboplastin time, prothrombin time, platelet adhesion, and hemolysis assay. In conclusion, the Aloe vera-glazed mPE substrate was inferred to attain desirable properties required for multifaceted biomedical implants.
    Matched MeSH terms: Microwaves
  10. Suresh Kumar R, Almansour AI, Arumugam N, Altaf M, Menéndez JC, Kumar RR, et al.
    Molecules, 2016 Jan 29;21(2):165.
    PMID: 26840282 DOI: 10.3390/molecules21020165
    The microwave-assisted three-component reactions of 3,5-bis(E)-arylmethylidene]tetrahydro-4(1H)-pyridinones, acenaphthenequinone and cyclic α-amino acids in an ionic liquid, 1-butyl-3-methylimidazolium bromide, occurred through a domino sequence affording structurally intriguing diazaheptacyclic cage-like compounds in excellent yields.
    Matched MeSH terms: Microwaves
  11. Wahidin S, Idris A, Shaleh SR
    Bioresour Technol, 2016 Apr;206:150-4.
    PMID: 26851899 DOI: 10.1016/j.biortech.2016.01.084
    The wet biomass microalgae of Nannochloropsis sp. was converted to biodiesel using direct transesterification (DT) by microwave technique and ionic liquid (IL) as the green solvent. Three different ionic liquids; 1-butyl-3-metyhlimidazolium chloride ([BMIM][Cl], 1-ethyl-3-methylimmidazolium methyl sulphate [EMIM][MeSO4] and 1-butyl-3-methylimidazolium trifluoromethane sulfonate [BMIM][CF3SO3]) and organic solvents (hexane and methanol) were used as co-solvents under microwave irradiation and their performances in terms of percentage disruption, cell walls ruptured and biodiesel yields were compared at different reaction times (5, 10 and 15 min). [EMIM][MeSO4] showed highest percentage cell disruption (99.73%) and biodiesel yield (36.79% per dried biomass) after 15 min of simultaneous reaction. The results demonstrated that simultaneous extraction-transesterification using ILs and microwave irradiation is a potential alternative method for biodiesel production.
    Matched MeSH terms: Microwaves*
  12. Rahman A, Islam MT, Samsuzzaman M, Singh MJ, Akhtaruzzaman M
    Materials (Basel), 2016 May 11;9(5).
    PMID: 28773479 DOI: 10.3390/ma9050358
    In this paper, a novel phenyl-thiophene-2-carbaldehyde compound-based flexible substrate material has been presented. Optical and microwave characterization of the proposed material are done to confirm the applicability of the proposed material as a substrate. The results obtained in this work show that the phenyl-thiophene-2-carbaldehyde consists of a dielectric constant of 3.03, loss tangent of 0.003, and an optical bandgap of 3.24 eV. The proposed material is analyzed using commercially available EM simulation software and validated by the experimental analysis of the flexible substrate. The fabricated substrate also shows significant mechanical flexibility and light weight. The radiating copper patch deposited on the proposed material substrate incorporated with partial ground plane and microstrip feeding technique shows an effective impedance bandwidth of 3.8 GHz. It also confirms an averaged radiation efficiency of 81% throughout the frequency band of 5.4-9.2 GHz.
    Matched MeSH terms: Microwaves
  13. Lieu T, Yusup S, Moniruzzaman M
    Bioresour Technol, 2016 Jul;211:248-56.
    PMID: 27019128 DOI: 10.1016/j.biortech.2016.03.105
    Recently, a great attention has been paid to advanced microwave technology that can be used to markedly enhance the biodiesel production process. Ceiba pentandra Seed Oil containing high free fatty acids (FFA) was utilized as a non-edible feedstock for biodiesel production. Microwave-assisted esterification pretreatment was conducted to reduce the FFA content for promoting a high-quality product in the next step. At optimum condition, the conversion was achieved 94.43% using 2wt% of sulfuric acid as catalyst where as 20.83% conversion was attained without catalyst. The kinetics of this esterification reaction was also studied to determine the influence of factors on the rate of reaction and reaction mechanisms. The results indicated that microwave-assisted esterification was of endothermic second-order reaction with the activation energy of 53.717kJ/mol.
    Matched MeSH terms: Microwaves
  14. Mubarak NM, Sahu JN, Abdullah EC, Jayakumar NS
    J Environ Sci (China), 2016 Jul;45:143-55.
    PMID: 27372128 DOI: 10.1016/j.jes.2015.12.025
    Multiwall carbon nanotubes (MWCNTs) were synthesized using a tubular microwave chemical vapor deposition technique, using acetylene and hydrogen as the precursor gases and ferrocene as catalyst. The novel MWCNT samples were tested for their performance in terms of Pb(II) binding. The synthesized MWCNT samples were characterized using Fourier Transform Infrared (FT-IR), Brunauer, Emmett and Teller (BET), Field Emission Scanning Electron Microscopy (FESEM) analysis, and the adsorption of Pb(II) was studied as a function of pH, initial Pb(II) concentration, MWCNT dosage, agitation speed, and adsorption time, and process parameters were optimized. The adsorption data followed both Freundlich and Langmuir isotherms. On the basis of the Langmuir model, Qmax was calculated to be 104.2mg/g for the microwave-synthesized MWCNTs. In order to investigate the dynamic behavior of MWCNTs as an adsorbent, the kinetic data were modeled using pseudo first-order and pseudo second-order equations. Different thermodynamic parameters, viz., ∆H(0), ∆S(0) and ∆G(0) were evaluated and it was found that the adsorption was feasible, spontaneous and endothermic in nature. The statistical analysis revealed that the optimum conditions for the highest removal (99.9%) of Pb(II) are at pH5, MWCNT dosage 0.1g, agitation speed 160r/min and time of 22.5min with the initial concentration of 10mg/L. Our results proved that microwave-synthesized MWCNTs can be used as an effective Pb(II) adsorbent due to their high adsorption capacity as well as the short adsorption time needed to achieve equilibrium.
    Matched MeSH terms: Microwaves*
  15. Rahim HA, Abdulmalek M, Soh PJ, Rani KA, Hisham N, Vandenbosch GA
    Sci Rep, 2016 07 20;6:29818.
    PMID: 27436496 DOI: 10.1038/srep29818
    This paper presents the investigation of path loss variation for subject-specific on-body radio propagation channels, considering the effect of metallic spectacles and loop like metallic accessories. Adding metallic items may affect the operability of Body Centric Wireless Communications (BCWC). Measurements were carried out in an RF-shielded room lined with microwave absorbing sheets for strategically placed bodyworn antennas covering the upper front torso and the lower limbs. The path loss of the on-body radio channel was characterized explicitly taking into account the body size of the subjects. For metallic loop-like accessories, the results indicate that for underweight subjects, there was a slightly higher influence, up to 2%, compared to normal and overweight subjects. Our findings indicate that a noticeable effect exists on on-body channels for dynamic movements where the metallic watch acts as a local scatterer that affects the non-line-of-sight (NLOS) signal path between transmitter and receiver for underweight subjects in comparison to normal and overweight subjects. The path loss decreases when the receiving terminal was positioned very close to the metallic item. If a loop-like metallic accessory is not appropriately considered when designing the radio channel on a subject, the reliability of the body-centric wireless system may degrade.
    Matched MeSH terms: Microwaves
  16. Khan NR, Wong TW
    Expert Opin Drug Deliv, 2016 09;13(9):1209-19.
    PMID: 27212391 DOI: 10.1080/17425247.2016.1193152
    OBJECTIVES: Skin drug retention is required in local treatment of skin cancer. This study investigated the interplay effects of ethosomes and microwave in transdermal drug delivery. Skin pre-treatment by microwave and applied with liquified medicine is deemed to 'cement' the skin thereby raising skin drug deposition.

    METHODS: 5-fluorouracil-loaded ethosomes were prepared and subjected to size, zeta potential, morphology, drug content, drug release and skin permeation tests. The molecular characteristics of untreated, microwave and/or ethosome-treated skins were examined by Fourier transform infrared and raman spectroscopy, thermal and electron microscopy techniques.

    RESULTS: The skin drug retention was promoted using larger ethosomes with negative zeta potentials that repelled anionic lipids of skin and hindered vesicle permeation into deep layers. These ethosomes had low ethanol content. They were less able to fluidize the lipid and defluidize the protein domains at epidermis to enlarge aqueous pores for drug permeation. Pre-treatment of skin by 2450 MHz microwave for 2.5 min further increased skin drug penetration and retention of low ethanol ethosomes and provided lower drug permeation than cases treated for 1.15 min and 5 min. A 2.5 min treatment might be accompanied by specific dermal protein fluidization via C=O moiety which translated to macromolecular swelling, narrowing of intercellular spaces at lower skin layers, increased drug retention and reduced drug permeation.

    CONCLUSION: Ethosomes and microwave synergized to promote skin drug retention.

    Matched MeSH terms: Microwaves*
  17. Amiri A, Shanbedi M, Ahmadi G, Eshghi H, Kazi SN, Chew BT, et al.
    Sci Rep, 2016 09 08;6:32686.
    PMID: 27604639 DOI: 10.1038/srep32686
    This study reports on a facile and economical method for the scalable synthesis of few-layered graphene sheets by the microwave-assisted functionalization. Herein, single-layered and few-layered graphene sheets were produced by dispersion and exfoliation of functionalized graphite in ethylene glycol. Thermal treatment was used to prepare pure graphene without functional groups, and the pure graphene was labeled as thermally-treated graphene (T-GR). The morphological and statistical studies about the distribution of the number of layers showed that more than 90% of the flakes of T-GR had less than two layers and about 84% of T-GR were single-layered. The microwave-assisted exfoliation approach presents us with a possibility for a mass production of graphene at low cost and great potentials in energy storage applications of graphene-based materials. Owing to unique surface chemistry, the T-GR demonstrates an excellent energy storage performance, and the electrochemical capacitance is much higher than that of the other carbon-based nanostructures. The nanoscopic porous morphology of the T-GR-based electrodes made a significant contribution in increasing the BET surface as well as the specific capacitance of graphene. T-GR, with a capacitance of 354.1 Fg(-1) at 5 mVs(-1) and 264 Fg(-1) at 100 mVs(-1), exhibits excellent performance as a supercapacitor.
    Matched MeSH terms: Microwaves
  18. Islam SS, Faruque MR, Islam MT
    Sci Rep, 2016 09 16;6:33624.
    PMID: 27634456 DOI: 10.1038/srep33624
    A new, metamaterial-based electromagnetic cloaking operation is proposed in this study. The metamaterial exhibits a sharp transmittance in the C-band of the microwave spectrum with negative effective property of permittivity at that frequency. Two metal arms were placed on an FR-4 substrate to construct a double-split-square shape structure. The size of the resonator was maintained to achieve the effective medium property of the metamaterial. Full wave numerical simulation was performed to extract the reflection and transmission coefficients for the unit cell. Later on, a single layer square-shaped cloak was designed using the proposed metamaterial unit cell. The cloak hides a metal cylinder electromagnetically, where the material exhibits epsilon-near-zero (ENZ) property. Cloaking operation was demonstrated adopting the scattering-reduction technique. The measured result was provided to validate the characteristics of the metamaterial and the cloak. Some object size- and shape-based analyses were performed with the cloak, and a common cloaking region was revealed over more than 900 MHz in the C-band for the different objects.
    Matched MeSH terms: Microwaves
  19. Hasan MM, Faruque MRI, Islam SS, Islam MT
    Materials (Basel), 2016 Oct 13;9(10).
    PMID: 28773951 DOI: 10.3390/ma9100830
    The aim of this paper is to introduce a compact double-negative (DNG) metamaterial that exhibits a negative refractive index (NRI) bandwidth of more than 3.6 GHz considering the frequency from 2 to 14 GHz. In this framework, two arms of the designed unit cell are split in a way that forms a Modified-Z-shape structure of the FR-4 substrate material. The finite integration technique (FIT)-based Computer Simulation Technology (CST) Microwave Studio is applied for computation, and the experimental setup for measuring the performance is performed inside two waveguide ports. Therefore, the measured data complies well with the simulated data of the unit cell at 0-degree and 90-degree rotation angles. The designed unit cell shows a negative refractive index from 3.482 to 7.096 GHz (bandwidth of 3.61 GHz), 7.876 to 10.047 GHz (bandwidth of 2.171 GHz), and 11.594 to 14 GHz (bandwidth of 2.406 GHz) in the microwave spectra. The design also exhibits almost the same wide negative refractive index bandwidth in the major region of the C-band and X-band if it is rotated 90 degrees. However, the novelty of the proposed structure lies in its effective medium ratio of more than 4, wide bandwidth, and compact size.
    Matched MeSH terms: Microwaves
  20. C SK, M S, K R
    Int J Biol Macromol, 2016 Nov;92:682-693.
    PMID: 27456125 DOI: 10.1016/j.ijbiomac.2016.07.062
    Response Surface Methodology (RSM) was used to optimize the parameters for microwave-assisted extraction of polysaccharides from Cyphomandra betacea. The results showed a good fit with a second-order polynomial equation that was statistically acceptable at P<0.05. Optimal conditions for the extraction of polysaccharides were: extraction time, 2h; microwave power, 400W; extraction temperature, 60°C; and ratio of raw material to water 1:40 (g/mL). Under the optimized conditions, the yield of polysaccharides was found to be relatively high (about 36.52%). The in vitro biological activities of antioxidant and antitumor were evaluated. The IC50 value of polysaccharides was found to be 3mg/mL. The percentage of Cell viability was determined by MTT assay. Our results showed that polysaccharides inhibited proliferation of MCF-7 (Breast carcinoma), A549 (Human lung carcinoma) and HepG2 (Liver carcinoma) with an IC50 of 0.23mg/mL, 0.17mg/mL and 0.62mg/mL respectively after 48h incubation. Polysaccharides were shown to promote apoptosis as seen in the nuclear morphological examination study using acridine orange (AO) and ethidium bromide (EB) staining. This is the first report on the effects of polysaccharides extracted from Cyphomandra betacea which exhibited stronger antioxidant and antitumor activities.
    Matched MeSH terms: Microwaves*
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links