Life tables were constructed for twelve cohorts of immature stages of the dengue vector Ae. albopictus in a wooded area of Penang, Malaysia. The development time of Ae. albopictus ranged from 6 to 10 days depending on the mean environmental temperature (r = - 0.639, p < 0.05). Total cohort mortality was correlated with total development time (r = 0.713, p < 0.05) but not temperature (r = -0.477, p > 0.05). Rainfall was correlated with neither development time (r = 0.554, p > 0.05) nor mortality (r = 0.322, p > 0.05). There was a significant difference among the total mortality that occurred in the twelve cohorts (H = 119.783, df = 11, p < 0.05). There was also a significant difference in mortality among the different stages (H = 274.00, df = 4, p < 0.05).
Matched MeSH terms: Aedes/growth & development*; Larva/growth & development
This study was conducted to analyze variation in Strombus canarium larvae development, growth and survivals when cultured during wet (main reproductive period) and dry seasons. Larvae were reared at 200 larvae L(-1) in filtered seawater (0.22 microm) and fed with Isochrysis galbana at 1000 cells mL(-1) ad libitum. The culture environment was maintained at 29 +/- 1 degrees C, salinity of 30 +/- 1 PSU and photoperiod of 12:12 light dark cycle. Growth of the larvae was described on a length-at-age basis using the modified Gompertz regression. There was high correlation in shell length-at-age relationship for both wet season (R2 = 0.99) and dry season (R2 = 0.98) culture experiments. The maximal growth rate (M) and survival rate (S) were higher for larvae cultured during wet season (M = 62.44 microm day(-1), S = 14.36-2.31%), compared with dry season (M = 43.05 microm day(-1), S = 5 +/- 1.15%). The maximal attainable larval size (a) was however lower during wet season (950.19 +/- 66.93 microm shell length) compared with dry season (1343.05 +/- 586.51 microm shell length), which might be due to significantly low larvae density in the latter. Further studies are needed to investigate variation in bio-chemical composition of the egg mass, which was suggested as the main reason for the differences.
Crop duration of a rice plant, essentially dictated by flowering response, is an important selection criterion. It is determined by the interaction of genotype and environment. A field experiment was conducted with 40 rice genotypes to assess the fluctuation and/or stability of crop duration in a series of 16 environmental conditions. The effects of genotype, environment and all the components of G x E interaction were highly significant. Among the genotypes Benaful and Gandho kasturi were most sensitive to environmental changes, and indicating lower adaptability over the environments. Crop durations of 17 genotypes were comparatively stable against environmental changes. Four genotypes viz. Basmati PNR346, BR28, Neimat and Sarwati showed only nonlinear sensitivity and thus unpredictable fluctuation. Seventeen genotypes indicated average stability over the environments. The AMMI analysis identified Badshabhog, Basmati Tapl-90, Bhog ganjia, BR38, Elai, Jata katari and Radhuni pagal as most stable genotypes over the environment series. It also advocated three comparatively stable environments for all the genotypes.
The cranial suspensory ligament (CSL) is a fibromuscular structure anchoring the embryonic gonad to the posterior abdominal wall in male and female mammals. Its persistence in females is believed to be responsible for retaining the ovaries within the abdomen, while its regression in males permits testis descent. Embryonic loss of the CSL in males is believed to be an androgen-dependent event, and failure of this process has been proposed as a cause of cryptorchidism. The present study demonstrates that the nuclei of mesenchymal cells in the caudal part of the CSL are immunoreactively positive for androgen receptor. We examined the effects of exposure of the non-steroidal antiandrogen flutamide during the period from gestational day 10 to birth on the development of the CSL and on testis descent. Exposure of male Albino Swiss rats to the antiandrogen flutamide during this period resulted in feminization of the external genitalia and the suppression of growth of the testes and male reproductive tracts. In adulthood, testes were found to be located in diverse positions including normal scrotal (50%), intra-abdominal (10%) and ectopic suprainguinal (40%). The CSL of the testis persisted into adulthood in all flutamide-treated males, regardless of testis location. In all cases, the ligament consisted of bundles of smooth muscle fibres in the retroperitoneal fat of the posterior abdominal wall. These findings suggest that androgen blockade during embryonic development interferes with testicular descent, but that maldescent cannot be correlated with either the persistence of the CSL of the testis or its structure.
Matched MeSH terms: Gonads/growth & development; Testis/growth & development
Larvae of the Synthesiomyia nudiseta (Wulp) were collected from a decomposed human corpse at the Department of Forensic Medicine, Penang Hospital. A colony of this species was established and the eggs were collected for rearing. The developmental times, rearing temperatures, and relative humidity were recorded twice daily from the time the eggs collected until adult emergence. An average of 5 larvae were randomly collected from the rearings twice daily, warm-water killed and preserved in Kahle's solution. The larval instar stages were determined by observing the number of posterior spiracular slits and the length of the preserved larvae were measured. When the larval life cycle was completed, the accumulated developmental times were calculated. A total of 8 replicates were carried out. The temperature of the rearing room was 28.5+/-1.5 degrees Celcius while the relative humidity was within 67-85%. The total developmental time for S. nudiseta was 322+/-19 hours (13.4+/-0.8 days).
The aim of this study is to determine the Spodoptera exigua larva population in the field and factor affecting their density. Population study of S. exigua larva and its affecting factors was carried out in Sekinchan, Selangor during 2003-2004. The larval density was found fluctuating during the study, where the highest number of larvae was an averaged of 18.17 per m2, while the lowest number was an averaged of 1.5 per m2. The mean number of larvae per plant also varies from 1.83 to 5.42. It was found that the larval density was influenced by the age and availability of the host plant. A total of 1881 larvae were collected, where 18.29 and 20.31% were successfully becoming female and male moths, respectively; 20.63% was being parasitized, where 7.07, 11.43, 0.11 and 2.02% were being parasitized by Microplitis manilae, Chelonus sp., Temelucha sp. and Peribaea orbata, respectively. Besides that, other biotic factors such as fungal or bacterial infection also cause death to the S. exigua larva, where a total of 1.91 and 10.89% were infected by them, respectively. Whilst 16.64% of the collected larvae were dead due to pesticide and 7.44% were not known cause of the death. Besides that, 3.89% of the S. exigua died during pupal stage or emergence. Further, climatic factor was found not influencing the larva populations. There were no correlation between the number of larva collected with the means of temperature, relative humidity and rainfall.
A study on liquid state bioconversion of sewage treatment plant (STP) sludge was assisted to evaluate the performance of batch fermenter compared to shake flask in a laboratory. Bioconversion of STP sludge was highly influenced by the mixed fungal culture of Penicillium corylophilum and Aspergillus niger after 4 days of treatment. The results showed that about 24.9 g kg(-1) dry sludge cake (DSC) was produced with enrichment of fungal biomass protein in fermenter while 20.1 g kg(-1) in shake flask after 4 days of fungal treatment. The effective biodegradation of STP sludge was recorded in both fermenter and shake flask experiment compared to control (uninnoculated sample). The results presented in this study revealed that the overall performance of fermenter in terms of sludge cake (biosolids) accumulation and biodegradation of STP sludge was higher than the shake flask.
Basidiospores were isolated from the fruiting bodies of Ganoderma infecting oil palms from an estate in Johor and from ornamental palms (including oil palms) from Singapore. The spores were then germinated to obtain homokaryotic mycelia. Based on clamp connection formation in paired hyphal fusions, tester strains were identified from the homokaryons isolated. Compatibility tests were then carried out using these testers to determine the relatedness of the homokaryotic Ganoderma isolates, both from Johor and from Singapore. Results from the compatibility tests showed that Ganoderma from both locations belong to the same species, while the Ganoderma isolates from Singapore share some common alleles. The pathogenicity tests carried out on Chrysalidocarpus lutescens seedlings using inoculum growing on rubber wood blocks showed that dikaryotic mycelia can cause basal stem rot infection.
Streptomyces sp. strain g10 exhibited strong antagonism towards Fusarium oxysporum f.sp. cubense (Foc) races 1, 2 and 4 in plate assays by producing extracellular antifungal metabolites. Treating the planting hole and roots of 4-week-old tissue-culture-derived 'Novaria' banana plantlets with strain g10 suspension (10(8) cfu/ml), significantly (P < 0.05) reduced wilt severity when the plantlets were inoculated with 10(4) spores/ml Foc race 4. The final disease severity index for leaf symptom (LSI) and rhizome discoloration (RDI) was reduced about 47 and 53%, respectively, in strain g10-treated plantlets compared to untreated plantlets. Reduction in disease incidence was not significant (P < 0.05) when plantlets were inoculated with a higher concentration (10(6) spores/ml) of Foc race 4. Rhizosphere population of strain g10 showed significant (P = 0.05) increase of more than 2-fold at the end of the 3rd week compared to the 2nd week after soil amendment with the antagonist. Although the level dropped, the rhizosphere population at the end of the 6th week was still nearly 2-fold higher than the level detected after 2 weeks. In contrast, the root-free population declined significantly (P = 0.05), nearly 4-fold after 6 weeks when compared to the level detected after 2 weeks. Neither growth-inhibiting nor growth-stimulating effects were observed in plantlets grown in strain g10-amended soil.
Determination of physico-chemical (weight, length, diameter, stomatal density, respiration rate, colour, soluble solids concentration, titratable acidity, chlorophyll and betacyanin content) and structural changes of red-fleshed dragon fruit (Hylocereus polyrhizus (Weber) Britton & Rose) was carried out from 5 to 35 days after pollination (DAP) in order to explain their growth, development, maturations and ripening stages.
Matched MeSH terms: Fruit/growth & development; Cactaceae/growth & development
A field experiment was conducted to evaluate photosynthetic efficiency along with different growth parameters of aromatic rice genotypes. Forty genotypes including three non-aromatic checks exhibited enormous variations for leaf area index (LAI), crop growth rate (CGR), relative growth rate (RGR), net assimilation rate (NAR), grain yield, total dry matter, harvest index and photosynthetic efficiency or energy use efficiency (Emu) at panicle initiation and heading stages. Minimum LAI-value was 0.52 in Khazar at PI stage and maximum was 4.91 in Sakkor khora at heading stage. The CGR-value was in the range of 4.80-24.11 g m(-2) per day. The best yielder BR39 produced grain of 4.21 t ha(-1) and the worst yielder Khazar gave 1.42 t ha(-1). Total dry matter (TDM) yield varied from 4.04 to 12.26 t ha(-1) where genotypes proved their energy use efficiency a range between 0.58 to 1.65%. Emu showed a significant positive relation with TDM (r=0.80(**)), CGR (r=0.72(**)) and grain yield (r=0.66(**)). A negative correlation was established between TDM and harvest index and LAI and RGR. Path analysis result showed that NAR at heading stage exerted highest positive direct effect (0.70) on Emu.
Matched MeSH terms: Oryza/growth & development*; Plant Leaves/growth & development
In the present study, we have reported a simple, fast and efficient regeneration protocol using mature embryos as explants, and discovered its effective applicability to a range of Indica rice genotypes. We have considered the response of six varieties in the steps of the regeneration procedure. The results showed that calli were variably developed from the scutellar region of seeds and visible within 6-20 days. The highest and lowest calli induction frequency (70% and 51.66%) and number of induced calli from seeds (14 and 10.33) were observed in MR269 and MRQ74, respectively. The maximum and minimum number (7.66 and 4) and frequency of embryogenic calli (38.33% and 20%) were recorded in MR219 and MRQ74, respectively. However, the highest browning rate was observed in MR84 (87%) and the lowest rate in MRQ50 (46%). The majority of plants regenerated from embryogenic calli were obtained from MRQ50 (54%) and the minimum number of plants from MR84. In this study, the maximum numbers of plantlets were regenerated from the varieties with highest rate of embryogenic calli. Also, various varieties, including MRQ50, MR269, MR276 and MR219, were satisfactorily responding, while MRQ74 and MR84 weakly responded to the procedure. Such a simple, successful and generalized method possesses the potential to become an important tool for crop improvement and functional studies of genes in rice as a model monocot plant.
Mosquitoes are principal vectors of major vector-borne diseases. They are widely found throughout urban and rural areas in Malaysia. They are responsible for various vector-borne diseases such as dengue, malaria, filariasis and encephalitis. A total of 158 mosquito larvae specimens were collected from the National Zoo, Malaysia, from 11 types of breeding habitats during the study period from end of May 2007 to July 2007. Aedes albopictus was the predominant species (35.4%), followed by Tripteroides aranoides (26.6%), Lutzia halifaxii (11.4%), Aedes alboscutellatus (10.1%), Aedes caecus (8.9%), Armigeres spp. (4.4%), Malaya genurostris (2.5%) and Culex vishnui (0.6%). It is important to have a mosquito free environment in a public place like the zoo. Routine larval surveillance should be implemented for an effective mosquito control program in order to reduce mosquito population.
A survey was conducted at 100 different rice fields in coastal areas of West Malaysia to identify most common and prevalent weeds associated with rice. Fields surveyed were done according to the quantitative survey method by using 0.5m x 0.5m size quadrate with 20 samples from each field. A total of 53 different weed species belong to 18 families were identified of which 32 annual and 21 perennial; 12 grassy, 13 sedges and 28 broadleaved weeds. Based on relative abundance the most prevalent and abundant weed species were selected in the coastal rice field. Among the 10 most abundant weed species, there were four grasses viz. Echinochloa crusgalli, Leptochloo chinensis, Echinochloo colona, Oryza sotivo L. (weedy rice).; four sedges viz. Fimbristylis miliacea, Cyperus iria, Cyperus difformis, Scirpus grossus and two broadleaved weeds viz. Sphenocleo zeylonica, Jussiaea linifolio. Leptochloa chinensis, E. crusgalli, F. miliocea, E. colona were more prevalent and abundant species out of the 10 most dominant weed species in the coastal rice field of Peninsular Malaysia.
Matched MeSH terms: Oryza/growth & development*; Plant Weeds/growth & development
Six parents of Jatropha curcas were crossed in half diallel fashion, and the F 1s were evaluated to determine the combining ability for nine germination parameters. The ratio between general combining ability (GCA) and specific combining ability (SCA) variances indicated preponderance of additive gene action for all the characters except germination percentage, time of 50% germination, seedling length, and seedling vigor index. The parents P 1 and P 2 were the best general combiner for most of the characters studied. The cross P 1 × P 5 was the best specific combiner for speed of emergence, germination percentage, germination energy, germination index, and seedling vigor index, the cross P 2 × P 5 for mean germination time, time of 50% germination, and seedling length, and the cross P 4 × P 5 for number of days to first germination. The germination percentage varied from 58.06 to 92.76% among the parents and 53.43 to 98.96% among the hybrids. The highest germination (98.96%) was observed in hybrid P 2 × P 4, and none of the hybrids or parents showed 100% germination. The highest germination index (GI) and seedling vigor index (SVI) were found in hybrid P 1 × P 5 and P 2 × P 5, respectively. The results of this study provide clue for the improvement of Jatropha variety through breeding program.
Matched MeSH terms: Jatropha/growth & development; Seedlings/growth & development
MAIN CONCLUSION: The propagation of Rafflesia spp. is considered to be important for future development of ornamental and other applications. Thus far, the only successful propagation technique has been grafting. This mini-review succinctly emphasizes what is known about Rafflesia species. Members of the genus Rafflesia (Rafflesiaceae), which are holoparasitic plants known to grow on a host vine, Tetrastigma sp., are widely spread from the Malayan Peninsula to various islands throughout Indonesia. The plant's geographical distribution as well as many other aspects pertaining to the basic biology of this genus have still not been studied. The young flower buds and flowers of wild Rafflesia hasseltii Suringar, Rafflesia keithii Meijer and Rafflesia cantleyi Solms-Laubach are used in local (Malaysia and Indonesia) traditional ethnomedicine as wound-healing agents, but currently no formal published research exists to validate this property. To maintain a balance between its ethnomedicinal and ornamental use, and conservation, Rafflesia spp. must be artificially cultivated to prevent overexploitation. A successful method of vegetative propagation is by host grafting using Rafflesia-impregnated Tetrastigma onto the stem of a normal Tetrastigma plant. Due to difficulties with culture contamination in vitro, callus induction was only accomplished in 2010 for the first time when picloram and 2,4-D were added to a basal Murashige and Skoog medium, and the tissue culture of holoparasitic plants continues to be extremely difficult. Seeds harvested from fertile fruit may serve as a possible method to propagate Rafflesia spp. This paper provides a brief synthesis on what is known about research related to Rafflesia spp. The objective is to further stimulate researchers to examine, through rigorous scientific discovery, the mechanisms underlying the ethnomedicinal properties, the flowering mechanisms, and suitable in vitro regeneration protocols that would allow for the fortification of germplasm conservation.
Matched MeSH terms: Angiosperms/growth & development*; Flowers/growth & development
The synthesis of 2,6-bis(hydroxy(phenyl)methyl)cyclohexanone 1 is described. The molecular structure of the title compound 1 was confirmed by NMR, FT-IR, MS, CHN microanalysis, and X-ray crystallography. The molecular structure was also investigated by a set of computational studies and found to be in good agreement with the experimental data obtained from the various spectrophotometric techniques. The antimicrobial activity and molecular docking of the synthesized compound was investigated.
Water scarcity in China poses a significant challenge for sustainable greenhouse tomato production, necessitating strategies that optimize water use without compromising yield. While previous studies have explored irrigation and fertilization separately, comprehensive research on their combined effects using soluble organic fertilizers in arid regions is lacking. This study evaluates the interactive effects of different irrigation levels and fertilizer application patterns on the growth, physiological characteristics, water use efficiency (WUE), nutrient uptake, nitrogen use efficiency (NUE), and yield of greenhouse tomatoes. A pot experiment was conducted with three irrigation levels: I1 (90-100% field capacity), I2 (72-80% field capacity), and I3 (54-60% field capacity), and four fertilizer treatments: C1 (combined soluble organic and chemical fertilizer), C2 (soluble chemical fertilizer only), C3 (sheep manure and chemical fertilizer), and C4 (soluble organic fertilizer only). Results showed that increased irrigation significantly enhanced plant height, stem diameter, leaf area, leaf SPAD value, dry matter accumulation, nitrogen uptake, and fruit yield. Among all treatments, I1C1 achieved the highest fruit yield under sufficient irrigation, whereas the I2C1 treatment maintained a relatively high yield while notably improving root-to-shoot ratio, WUE, and nitrogen uptake, indicating an optimal balance for water-limited conditions. These findings demonstrate that integrating appropriate irrigation levels with combined fertilizer application can effectively mitigate water scarcity impacts, optimizing water savings and resource use efficiency while sustaining greenhouse tomato production in arid regions.
Matched MeSH terms: Fruit/growth & development; Plant Leaves/growth & development
Soybean is a short-day crop and the long-duration variety takes 120 days for maturity. A protocol for rapid generation advancement in soybean breeding is worthwhile keeping in view its utility. The study emphasizes standardisation of physical conditions, especially using warm white and cool white light-emitting diodes to hasten flowering and pod setting in soybean (DS9712 genotype). Complete open flowers were obtained with a 16 L/8D (dark/light) photoperiod in 30 days. The results also highlighted the application of interventions of physical conditions and inputs, especially during the reproductive phase to shorten the seed-to-seed generation time by around 15 days in a low-cost method for soybean breeding. Breeding will be revolutionised in case economic speed breeding is combined with modern breeding technologies, thereby resulting in more generations per year.
Matched MeSH terms: Seeds/growth & development; Flowers/growth & development