Displaying publications 141 - 160 of 363 in total

Abstract:
Sort:
  1. Baby R, Hussein MZ, Zainal Z, Abdullah AH
    Nanomaterials (Basel), 2021 Nov 20;11(11).
    PMID: 34835897 DOI: 10.3390/nano11113133
    Heavy metal contamination in water poses a great risk to human health as well as to the lives of other creatures. Activated carbon is a useful material to be applied for the treatment of heavy metal-contaminated water. In this study, functionalized activated carbon (FAC) was produced by the induction of nitro groups onto activated carbon using nitric acid. The resulting material was characterized in detail using the XRD, Raman, BET, FTIR, and FESEM techniques. The FAC was used for the treatment of heavy metal-contaminated water using different adsorption parameters, i.e., solution pH, contact time, adsorbent dosage and heavy metal ion concentrations, and these parameters were systematically optimized. It was found that FAC requires 90 min for the maximum adsorption of the heavy metal ions; Cr6+, Pb2+, Zn2+ and Cd2+. The kinetic study revealed that the metal ion adsorption follows the pseudo-second-order. The Freundlich and Langmuir isotherms were applied to determine the best fitting adsorption isotherm models. The adsorption capacities were also determined for each metal ion.
  2. Nurain Azmi, Sabirin Mustafa, Nur Hazirah Mohd Yunos, Wan Nor Azlin Wan Mohd Sakri, Muhammad Nazzim Abdul Halim, Amin Aadenan
    MyJurnal
    In this paper, a simple analysis yet a straight forward method of determining the Planck’s constant by
    evaluating the stopping potential of five different colors of light emitting diodes (LEDs) is presented.
    The study aimed to identify the Planck’s constant based on the relationship between the potential
    difference of LEDs to their respective frequencies under room temperature with low illumination of
    ambient light by applying a simple theoretical analysis. The experiment was performed by connecting
    the circuit in series connection and the voltage reading of LEDs were recorded and then presented in a
    graph of frequency, f versus stopping voltage, Vo. To determine the Planck’s constant, the best fit line
    was analyzed and the centroid was also identified in order to find the minimum and maximum errors
    due the gradient of the graph. From the analysis, results showed that the Planck constant value was
    (5.997 ± 1.520) × 10–34 J.s with approximately 10% of deviation from the actual value. This
    demonstrates that a simple analysis can be utilized to determine the Planck’s constant for the purpose
    of the laboratory teaching and learning at the undergraduate level and can be served as a starting point
    for the students to understand the concept of quantization of energy in Modern Physics more
    effectively. This is to further suggest that the Planck’s constant can be identified via a low-cost and
    unsophisticated experimental setup.
  3. Nur Farahana Pauzi, Zafri Azran Abdul Majid, Wan Muhamad Nasuha Wan Hussin, Abdul Halim Sapuan, Mohd Zulfaezal Che Azemin
    MyJurnal
    X-ray is produced in form of divergent beam. The beam divergence results to blurring effect that influences image diagnosis. Thus, the blurring effect assessment should be enrolled within the quality control (QC) program of an imaging unit.
  4. Farawahida Abdul Halim, Jinap Selamat, Nor Khaizura Mahmud @ Ab Rashid, Chin, C. K., Nik Iskandar Putra Samsudin, Norlia, M.
    MyJurnal
    The aims of the present work were to determine the prevalence of Aspergillus spp. and occurrence of aflatoxins (AFs) along the peanut sauce processing line from different peanut sauce
    companies in Malaysia, and to determine to which extent peanut sauce processing steps
    employed by the peanut sauce industries could efficiently reduce AFs in peanut sauce. Peanut
    and chili samples were collected at each processing step along the peanut sauce production
    from three peanut sauce companies which were different in companies’ profile. Peanut
    samples from Companies B (87.5%) and C (100%) were contaminated with AFs. Of these,
    12.5% (Company B) and 75% (Company C) samples exceeded the Malaysian regulatory limit.
    None of the samples from Company A was contaminated. The steps efficient in reducing AFs
    in peanut sauce identified in the present work were (i) safety monitoring of raw materials, (ii)
    sorting of raw materials, and (iii) heat treatment of raw materials.
  5. Wong, Jen Kuen, Lim, Kean Pah, Abdul Halim Shaari, Chen, Soo Kien, Ng, Siau Wei, Gan, Albert Han Ming
    MyJurnal
    With a view to understanding the effect of rare earth element (Ce, Pr, Nd, Sm and Gd) substitution for the La site in LaMnO3 (LMO), the samples were prepared via solid-state reaction. Structure investigation by X-ray diffraction (XRD) showed that structure transformation from trigonal (LMO) to orthorhombic (PMO, NMO, SMO and GMO) occurred when smaller trivalent rare earth element was replaced. The MnO6 octahedra were tilted and elongated or compressed, corresponding to the ionic radii of the rare earth inserted. Meanwhile, microstructure study using scanning electron microscopy (SEM) illustrated that La substitution by another rare earth element caused a reduction in grain size. This might due to the changes in enthalpy of fusion by other rare earth ions, where higher enthalpy of fusion favours formation of smaller grain size. However, CeMnO3 did not form under this preparation condition. The magnetic properties studied from the hysteresis plot taken at room temperature indicated that the substitution of La with other magnetic trivalent rare earth ions strongly weakened the magnetic strength of the system.
  6. Lim, Kean Pah, Abdul Halim Shaari, Chen, Soo Kien, Ng, Siau Wei, Zalita Zainuddin, Ye, Chau Yuen
    MyJurnal
    A series of polycrystalline samples (La1-xSmx)0.67Sr0.33MnO3 (X=0.00, 0.05 and 0.10) were prepared using the conventional solid-state reaction method. The XRD analysis indicated that all the samples were fully crystalline and in a single phase with a rhombohedral structure after a sintering at 1200ºC for 24 hours in air. Meanwhile, the Atomic Force Microscopy measurements showed that a small amount of Sm doping in La sites affected the grain growth and this might affect the grain boundary layer, thus resulting in the reduction of the Curie temperature, TC. Extrinsic magnetoresistance (MR) was observed for all the samples with a large negative MR at low field (0-0.1 or 0.2T) region, followed by a slower varying MR at high field (0.1 or 0.2-1T). The highest low-field MR value of -4.6% (at 0.1T) and -6.1% (at 0.2T) were observed for sample X=0.10 and X=0.05, respectively. Hence, these indicated that the extrinsic MR was grain size dependent and was therefore enhanced with a small amount of Sm substitution in La sites.
  7. Nur Nadia Adila Abdul Halim, Mohd Hafiidz Jaafar, Kadir Arifin, Kadaruddin Aiyub, Muhammad Rizal Razman, Mohd Haizzan Yahaya
    MyJurnal
    The construction industry is one of the largest sectors in Malaysia. This industry has become one of the main contributors
    for national economic development and consistently contributes 3% to 5% to the national Gross Domestic Product (GDP). This
    sector has also opened up job opportunities for various levels of employment. High demands and rapid urbanization offer huge
    opportunities for registered contractors. Despite contributing in enhancing national economics, this sector has been regarded as one
    of the most dangerous and hazardous workplaces due to the type of nature and the job activities at construction sites. According to
    the International Labour Organization (ILO), 2.3 million fatalities related to occupational accidents and illnesses are estimated to
    occur each year. Furthermore, 4 percent of world GDP is estimated to be lost due to occupational accidents and illnesses. The number
    of fatality accidents in the construction industry was the highest with 652 cases of non-permanent disability (NPD) and permanent
    disability (PD) accidents in the period 2007 to 2015, equivalent to 72.44 cases per year and representing 48.77% of the construction
    industry. The huge gap between the number of accidents reported to SOCSO and DOSH becomes a major concern due to a rising
    number of underreported cases of fatalities and injury in the construction sector, especially those involving foreign labour. The margin
    between accidents reported to SOCSO and DOSH is 97.49%. Regards to rapid developments, safety measures to improve performance
    management of OSH should be emphasized to reduce losses of life, property and productivity.
  8. Abdul Fattah Abu Bakar, Siti Nathasa Md Barkawi, Marlia Mohd. Hanafiah, Lee KE, Azhar Abdul Halim
    Sains Malaysiana, 2016;45:1509-1516.
    Keberkesanan rawatan air sisa industri automotif ditentukan dengan menggunakan kaedah penjerapan turus. Peratusan penyingkiran ammonia dan logam berat terpilih telah dikaji menggunakan pasir biasa dan pasir terubah suai secara kimia sebagai bahan penjerap. Dua model matematik iaitu Model Thomas serta Model Yoon-Nelson telah digunakan untuk menentukan kapasiti penjerapan maksimum ammonia. Peratusan penyingkiran ammonia menunjukkan pasir terubah suai secara kimia mencatatkan julat peratusan penyingkiran yang lebih tinggi iaitu 43.68% hingga 96.55% berbanding pasir biasa yang mencatatkan julat 0% hingga 89.66%. Logam berat zink, mangan, kromium, kuprum, arsenik, nikel, kobalt dan ferum mencatatkan peratusan penyingkiran antara 93% hingga 100% apabila menggunakan pasir terubah suai secara kimia manakala pasir biasa mencatatkan julat peratusan penyingkiran daripada 0.8% hingga 100%. Keputusan analisis menggunakan Model Thomas menunjukkan kapasiti penjerapan maksimum, qo ammonia menggunakan pasir terubah suai secara kimia (8.80 mg/g) adalah empat kali lebih tinggi daripada pasir biasa (2.57 mg/g) manakala masa bolos, t0.5 bahan penjerap yang ditentukan menggunakan Model Yoon dan Nelson mencatatkan masa tertinggi bagi pasir terubah suai secara kimia iaitu 30.18 min berbanding 9.57 min bagi pasir biasa. Kajian ini menunjukkan peratusan penyingkiran dan kapasiti penjerapan ammonia dan logam berat terpilih iaitu zink, mangan, kuprum, arsenik, nikel, kobalt dan ferum lebih tinggi bagi turus pasir terubah suai secara kimia berbanding pasir biasa.
  9. Norhayati Ibrahim, Rafidah Aini Pakri Mohamed, Sharlene Teo, Normah Che In, Abdul Halim Abdul Gafor, Rozmi Ismail, et al.
    Sains Malaysiana, 2016;45(5):753-759.
    The prevalence of chronic kidney disease (CKD) have increased and become one of the major public health concerns
    worldwide including Malaysia. Previous studies on CKD generally focused on patients who were already undergoing
    dialysis treatment; however, studies investigating the stresses experienced by pre-dialysis CKD patients were limited. This
    study aimed to examine the prevalence of psychological distress and their association with the Health Related Quality
    of Life (HRQoL) during the different stages of CKD. This cross-sectional study involved 200 pre-dialysis patients from
    stages 3 to 5, who were recruited from the Nephrology Clinic at the National University of Malaysia Medical Centre
    (UKMMC). The instruments used in this study were the Short Form 36 (measuring HRQoL) and Hospital Anxiety and
    Depression Scale (HADS) to measure the psychological distress. The results showed that the prevalence of depression
    and anxiety increased proportionally with the CKD stages. The HRQoL sub-component scores declined as the CKD stages
    increased except for social functioning. An impaired HRQoL was associated with depression and anxiety in the CKD
    patients. The results suggested that it is very important to manage kidney disease at an early stage and that a healthier
    lifestyle is adopted.
  10. Abdul Halim NS, Fakiruddin KS, Ali SA, Yahaya BH
    Int J Mol Sci, 2014;15(9):15044-60.
    PMID: 25162825 DOI: 10.3390/ijms150915044
    Mesenchymal stem cells (MSCs) hold tremendous potential for therapeutic use in stem cell-based gene therapy. Ex vivo genetic modification of MSCs with beneficial genes of interest is a prerequisite for successful use of stem cell-based therapeutic applications. However, genetic manipulation of MSCs is challenging because they are resistant to commonly used methods to introduce exogenous DNA or RNA. Herein we compared the effectiveness of several techniques (classic calcium phosphate precipitation, cationic polymer, and standard electroporation) with that of microporation technology to introduce the plasmid encoding for angiopoietin-1 (ANGPT-1) and enhanced green fluorescent protein (eGFP) into human adipose-derived MSCs (hAD-MSCs). The microporation technique had a higher transfection efficiency, with up to 50% of the viable hAD-MSCs being transfected, compared to the other transfection techniques, for which less than 1% of cells were positive for eGFP expression following transfection. The capability of cells to proliferate and differentiate into three major lineages (chondrocytes, adipocytes, and osteocytes) was found to be independent of the technique used for transfection. These results show that the microporation technique is superior to the others in terms of its ability to transfect hAD-MSCs without affecting their proliferation and differentiation capabilities. Therefore, this study provides a foundation for the selection of techniques when using ex vivo gene manipulation for cell-based gene therapy with MSCs as the vehicle for gene delivery.
  11. Gan GG, Subramaniam R, Bee PC, Chin EF, Abdul-Halim H, Tai MC
    Asian Pac J Cancer Prev, 2014;15(4):1703-6.
    PMID: 24641394
    BACKGROUND: The current standard treatment for patients with newly diagnosed diffuse large B cell lymphoma (DLBCL) is rituximab combined with cyclophosphamide, doxorubicin, vincristine and prednisolone (CHOP). A significant number of patients were not treated with recommended dose of rituximab due to limited financial resources in Malaysia. This study evaluates the efficacy of R-CHOP like chemotherapy in Malaysian patients with DLBCL.

    MATERIALS AND METHODS: The study comprised a retrospective analysis of patients with DLBCL treated at a single centre. The outcome was compared with patients who were treated with R-CHOP like and CHOP like chemotherapy. Patients who were treated with lower dose of rituximab was subanalysed for outcome.

    RESULTS: A total of 86 patients who had CHOP-like chemotherapy were included. Only 39 (45%) patients had rituximab and only 12 (29%) patients had the recommended dose. The overall response (OR) and complete response (CR) rates were 88% and 81% respectively. There was no significant difference in OR and CR in patients who had rituximab and those without rituxmab. Those with International Prognostic Index (IPI) score of ≤ 2 had significant higher CR rate, progression free survival (PFS) and overall survival (p<0.001).

    CONCLUSIONS: The lack of significant improvement in CR and DFS in our patients may be due to an inadequate dose of rituximab.

  12. Fadilah N, Mohamad-Saleh J, Abdul Halim Z, Ibrahim H, Syed Ali SS
    Sensors (Basel), 2012;12(10):14179-95.
    PMID: 23202043 DOI: 10.3390/s121014179
    Ripeness classification of oil palm fresh fruit bunches (FFBs) during harvesting is important to ensure that they are harvested during optimum stage for maximum oil production. This paper presents the application of color vision for automated ripeness classification of oil palm FFB. Images of oil palm FFBs of type DxP Yangambi were collected and analyzed using digital image processing techniques. Then the color features were extracted from those images and used as the inputs for Artificial Neural Network (ANN) learning. The performance of the ANN for ripeness classification of oil palm FFB was investigated using two methods: training ANN with full features and training ANN with reduced features based on the Principal Component Analysis (PCA) data reduction technique. Results showed that compared with using full features in ANN, using the ANN trained with reduced features can improve the classification accuracy by 1.66% and is more effective in developing an automated ripeness classifier for oil palm FFB. The developed ripeness classifier can act as a sensor in determining the correct oil palm FFB ripeness category.
  13. Chendran P, Seng Fai T, Wan Abdul Halim WH, Md Din N
    J Glaucoma, 2019 10;28(10):e162-e164.
    PMID: 31368915 DOI: 10.1097/IJG.0000000000001334
    Ocular pyogenic granuloma is a benign tumor seen after ocular insult secondary to ocular surgeries, trauma or infection. Although benign, intervention is sometimes necessary. Previous authors have reported pyogenic granuloma formation following oculoplastic surgeries. We report a pyogenic granuloma after an Ahmed glaucoma valve implantation. A 65-year-old gentleman presented with right eye redness associated with pain and swelling ~2 months after Ahmed glaucoma valve implantation. Examination found a sessile growth on the tube extruding puss with signs of endophthalmitis. The glaucoma drainage device was explanted and culture results grew Staphylococcus aureus. This article discusses the formation of pyogenic granuloma on a glaucoma drainage device and its management.
  14. Tan SY, Md Din N, Mohd Khialdin S, Wan Abdul Halim WH, Tang SF
    Cureus, 2021 Feb 12;13(2):e13320.
    PMID: 33738163 DOI: 10.7759/cureus.13320
    The hazy corneal donor-recipient interface after corneal transplant may cause difficulties when implanting the XEN gel stent via ab-interno approach. We aim to describe XEN gel stent implantation via ab-externo approach in refractory steroid-induced glaucoma after corneal lamellar keratoplasty. Under local anaesthesia, the XEN injector needle was inserted 7 mm behind the limbus with the bevel facing up, directly beneath the conjunctiva and advanced to the marked 2.5 mm scleral entry wound. The needle then pierced the sclera until the needle tip was just visible in the anterior chamber (AC). The slider was pushed until the tip of the XEN stent was seen in the AC. The needle was slowly withdrawn while still pushing the slider to complete stent deployment. Subconjunctival Mitomycin C 0.01% (30 µg/0.3 mL) was then injected posterior to the bleb. Three eyes of three patients with steroid-induced glaucoma after lamellar keratoplasty underwent XEN gel stent implantation via ab-externo approach placed at the superotemporal quadrant. Pre-operatively, all patients had uncontrolled IOP between 30-45 mmHg despite maximum medications and selective laser trabeculoplasty. After XEN gel stent implantation, IOP ranged between 10-17 mmHg with one or two topical antiglaucoma at 12 months. Complications include hypotony maculopathy, stent migration and hyphaema, all of which were successfully managed. Corneal graft remained clear at 12 months. XEN gel stent implantation via ab-externo approach is able to achieve good intraocular pressure (IOP) control without compromising cornea graft in patients with steroid-induced glaucoma after lamellar keratoplasty at 12 months.
  15. Ab Kadir S, Wan-Mohtar WA, Mohammad R, Abdul Halim Lim S, Sabo Mohammed A, Saari N
    J Ind Microbiol Biotechnol, 2016 Oct;43(10):1387-95.
    PMID: 27541157 DOI: 10.1007/s10295-016-1828-5
    In this study, four selected commercial strains of Aspergillus oryzae were collected from soy sauce koji. These A. oryzae strains designated as NSK, NSZ, NSJ and NST shared similar morphological characteristics with the reference strain (A. oryzae FRR 1675) which confirmed them as A. oryzae species. They were further evaluated for their ability to produce γ-aminobutyric acid (GABA) by cultivating the spore suspension in a broth medium containing 0.4 % (w/v) of glutamic acid as a substrate for GABA production. The results showed that these strains were capable of producing GABA; however, the concentrations differed significantly (P 
  16. Abdul Halim Chong FH, Md Salleh SN, Abu Bakar N, Ismail IN
    Singapore Dent J, 2019 12;39(1):41-52.
    PMID: 32910746 DOI: 10.1142/S2214607519500044
    Aim: This study evaluates perception toward facial appearance in dentofacial deformity and the need for orthognathic surgery among the public with and without dental backgrounds. Materials and Methods: A questionnaire consisting of 12 facial photographs of cases with dentofacial deformity or malocclusion in varying severity was used. A hundred individuals were selected to answer the questionnaire. The perception of facial appearance (FAS), treatment need score (TNS), and knowledge regarding dentofacial deformity were used for the evaluation. Results: Significant differences were found between dental and non-dental when the respondents' knowledge in all the questionnaire items ([Formula: see text].05) was assessed. However, no significant difference was found in the mean of FAS and TNS in all the presented cases (normal, borderline, severe). Pearson correlation between perceived FAS and TNS was statistically negative for severe and normal cases, whereby a decrease in FAS for severe cases showed an increase in TNS, and an increase in FAS for normal cases showed a decrease in TNS. Conclusion: Respondents with dental background had sound knowledge of dentofacial deformity. A poorly attractive respondent with dentofacial deformity showed a greater need for orthognathic surgery.
  17. Fang SY, Wan Abdul Halim WH, Mat Baki M, Din NM
    Graefes Arch Clin Exp Ophthalmol, 2018 Apr;256(4):783-790.
    PMID: 29492688 DOI: 10.1007/s00417-018-3919-7
    PURPOSE: Obstructive sleep apnea syndrome (OSAS) patients are at risk of glaucoma but the risk increases if they have higher intraocular pressure (IOP) while sleeping. We aim to evaluate the postural effect of upright and prolong supine positions on IOP in these patients.

    METHODS: This is a cross-sectional study involving 27 patients with symptoms of OSAS seen at a tertiary institutional center and 25 normal controls performed between June 2015 and June 2016. All patients and controls underwent a polysomnography (PSG) test and were diagnosed with OSAS based on the apnea-hypopnea index (AHI). Patients are those with OSAS symptoms and had AHI > 5, whereas controls are staffs from the ophthalmology clinic without clinical criteria for OSAS and had PSG result of AHI

  18. Al-Madhagi WM, Mohd Hashim N, Awad Ali NA, Alhadi AA, Abdul Halim SN, Othman R
    PeerJ, 2018;6:e4839.
    PMID: 29892499 DOI: 10.7717/peerj.4839
    Background: Peperomia belongs to the family of Piperaceae. It has different uses in folk medicine and contains rare compounds that have led to increased interest in this genus. Peperomia blanda (Jacq.) Kunth is used as an injury disinfectant by Yemeni people. In addition, the majority of Yemen's population still depend on the traditional remedy for serious diseases such as cancer, inflammation and infection. Currently, there is a deficiency of scientific evidence with regards to the medicinal plants from Yemen. Therefore, this study was performed to assess the chemical profile and in vitro antioxidant and cytotoxic activities of P. blanda.

    Methods: Chemical profiling of P. blanda was carried out using gas chromatography mass spectrometry (GCMS) followed by isolation of bioactive compounds by column chromatography. DPPH• and FRAP assays were used to evaluate antioxidant activity and the MTT assay was performed to estimate the cytotoxicity activity against three cancer cell lines, namely MCF-7, HL-60 and WEHI-3, and three normal cell lines, MCF10A, WRL-68 and HDFa.

    Results: X-ray crystallographic data for peperomin A is reported for the first time here and N,N'-diphenethyloxamide was isolated for the first time from Peperomia blanda. Methanol and dichloromethane extracts showed high radical scavenging activity with an IC50 of 36.81 ± 0.09 µg/mL, followed by the dichloromethane extract at 61.78 ± 0.02 µg/mL, whereas the weak ferric reducing activity of P. blanda extracts ranging from 162.2 ± 0.80 to 381.5 ± 1.31 µg/mL were recorded. In addition, petroleum ether crude extract exhibited the highest cytotoxic activity against all the tested cancer cell lines with IC50 values of 9.54 ± 0.30, 4.30 ± 0.90 and 5.39 ± 0.34 µg/mL, respectively. Peperomin A and the isolated mixture of phytosterol (stigmasterol and β-sitosterol) exhibited cytotoxic activity against MCF-7 and WE-HI cell lines with an IC50 of (5.58 ± 0.47, 4.62 ± 0.03 µg/mL) and (8.94 ± 0.05, 9.84 ± 0.61 µg/mL), respectively, compared to a standard drug, taxol, that has IC50 values of 3.56 ± 0.34 and 1.90 ± 0.9 µg/mL, respectively.

    Conclusion: The activities of P. blanda extracts and isolated compounds recorded in this study underlines the potential that makes this plant a valuable source for further study on anticancer and antioxidant activities.

  19. Kardia E, Zakaria N, Sarmiza Abdul Halim NS, Widera D, Yahaya BH
    Regen Med, 2017 03;12(2):203-216.
    PMID: 28244823 DOI: 10.2217/rme-2016-0112
    The therapeutic use of mesenchymal stromal cells (MSCs) represents a promising alternative clinical strategy for treating acute and chronic lung disorders. Several preclinical reports demonstrated that MSCs can secrete multiple paracrine factors and that their immunomodulatory properties can support endothelial and epithelial regeneration, modulate the inflammatory cascade and protect lungs from damage. The effects of MSC transplantation into patients suffering from lung diseases should be fully evaluated through careful assessment of safety and associated risks, which is a prerequisite for translation of preclinical research into clinical practice. In this article, we summarize the current status of preclinical research and review initial MSC-based clinical trials for treating lung injuries and lung disorders.
  20. Sukor NF, Jusoh R, Kamarudin NS, Abdul Halim NA, Sulaiman AZ, Abdullah SB
    Ultrason Sonochem, 2020 Apr;62:104876.
    PMID: 31796331 DOI: 10.1016/j.ultsonch.2019.104876
    Phenolic acids of oak gall were extracted using ultrasonic-probe assisted extraction (UPAE) method in the presence of ionic liquid. It was compared with classical ultrasonic-bath assisted extraction (CUBAE) and conventional aqueous extraction (CAE) method, with and without the presence of ionic liquid. Remarkably, the UPAE method yielded two-fold higher extraction yield with the presence of ionic liquid, resulting 481.04 mg/g for gallic acids (GA) and 2287.90 mg/g for tannic acids (TA), while a decreased value of 130.36 mg/g for GA and 1556.26 mg/g for TA were resulted with the absence of ionic liquid. Intensification process resulted the highest yield of 497.34 mg/g and 2430.48 mg/g for GA and TA, respectively, extracted at temperature 50 °C with sonication intensity of 8.66 W/cm2 and 10% duty cycle, diluted in ionic liquid, 1-Butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [Bmim][Tf2N] at concentration of 0.10 M with sample-to-solvent ratio 1:10 for 8 h. Peleg's model successfully predicted the UPAE process confirming that extraction capacity is the controlling factor in extracting phenolic acids. Hence, it can be concluded that UPAE method and ionic liquid have synergistic effect as it effectively enhanced the extraction efficiency to increase the bioactive constituents yield.
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links