Displaying publications 141 - 160 of 318 in total

Abstract:
Sort:
  1. Sesquiterpenes and alkaloids from Scorodocarpus borneensis
    Wiart C, Martin MT, Awang K, Hue N, Serani L, Laprévote O, et al.
    Phytochemistry, 2001 Oct;58(4):653-6.
    PMID: 11576617
    A new sesquiterpene, scodopin, and a mixture of three tryptamine-type alkaloids, scorodocarpines A-C, were isolated from the fruits of Scorodocarpus borneensis, together with a known hemisynthetic sesquiterpene, cadalene-beta-carboxylic acid, which was isolated from the bark. The structures of the new compounds were elucidated by interpretation of spectral data, especially tandem mass spectrometry for the alkaloid mixture.
    Matched MeSH terms: Spectrum Analysis
  2. Speciation of inorganic arsenic and selenium in leachates from landfills in relation to water quality assessment
    Yusof AM, Salleh S, Wood AK
    Biol Trace Elem Res, 1999;71-72:139-48.
    PMID: 10676488
    Speciation of arsenic and selenium was carried out on water samples taken from rivers used as water intake points in the vicinity of landfill areas used for land-based waste disposal system. Leachates from these landfill areas may contaminate the river water through underground seepage or overflowing, especially after a heavy downpour. Preconcentration of the chemical species was done using a mixture of ammonium pyrrolidinethiocarbamate-chloroform (APDTC-CHCl3). Because only the reduced forms of both arsenic and selenium species could be extracted by the preconcentrating mixture, suitable reducing agents such as 25% sodium thiosulfate for As(III) and 6M HCl for Se(IV) were used throughout the studies. Care was taken to exclude the interfering elements such as the alkali and alkali earth metals from the inorganic arsenic and selenium species by introducing 12% EDTA solution as the masking agent. The extracted mixture was irradiated in a thermal neutron flux of 4 x 10(12)/cm/s from a TRIGA Mk.II reactor at the Malaysia Institute of Nuclear Technology Research (MINT). Gamma rays of 559 keV and 297 keV from 76As and 75Se, respectively, were used in the quantitative determination of the inorganic species. Mixed standards of As(III) and Se(IV) used in the percentage efficiency procedure were prepared from salts of Analar grade. The water quality evaluation was viewed from the ratio of the inorganic species present.
    Matched MeSH terms: Spectrum Analysis
  3. Fulltext Reinventing nano drug delivery systems for hydrophilic active ingredients in Ayurvedic lipid based formulations containing poly herbal decoction
    Duraipandi S, Selvakumar V
    J Ayurveda Integr Med, 2019 01 08;11(3):224-227.
    PMID: 30635246 DOI: 10.1016/j.jaim.2018.01.008
    BACKGROUND: Anu Tailam, an Ayurvedic medicated oil where 'anu' meant for atom and 'tailam' meant for oil and virtually meant for 'oil of subtle or atomic size particles'. Since the major active ingredients in this formulation are incorporated from the polyherbal decoction, it is expected to contain predominantly water soluble ingredients.

    OBJECTIVES: It is hypothesized that these polar active botanical ingredients are present in the formulation should be either suspended in the form of submicron particles or entrapped in the submicron vesicular structures since the formulation did not show any precipitation or phase separation instead showed a monophasic oily liquid with very little moisture.

    MATERIALS AND METHODS: In the present investigation, the micro architecture of the anu tailam is studied via column chromatography and high performance thin layer chromatography to prove the contents are polar hydrophilic compounds followed by optical microscopy, photon correlation Spectroscopy (PCS) and environmental scanning electron microscope (ESEM) to study the particle/vesicle size of the formulation.

    RESULTS: In this study, it was proved that the formulation contained only polar ingredients and can be extracted in polar solvents like methanol and ethanol. It was also found that the formulation taken for study contained nano particles of the active botanical ingredients embedded in a network of vesicular structures of the lipid base.

    CONCLUSION: The selected Ayurvedic formulation 'anutailam' found to contain novel nano drug delivery system to deliver water soluble ingredients across barriers.

    Matched MeSH terms: Spectrum Analysis
  4. Fulltext Optimization of headspace solid phase microextraction (HS-SPME) for the extraction of volatile organic compounds (VOCs) in MD2 pineapple
    Syaidatul Faraha Zainuddin, Siti Raihan Zakaria, Norashikin Saim, Rossuriati Dol Hamid, Rozita Osman
    Science Letters, 2020;14(2):58-70.
    MyJurnal
    Headspace solid phase microextraction (HS-SPME) was employed for the extraction of volatile organic compounds (VOCs) in MD2 pineapple (Ananas comosus L. var. comosus cv. MD2). Optimisation of HS-SPME operating parameters was conducted using three-factor, three-level Box–Behnken response surface experimental design to evaluate the interactive effects of temperature (30 – 50 ºC), extraction time (10 – 30 min) and salting effect (1 – 3 g of salt addition) on the amount of selected VOCs. Determination of VOCs was done using gas chromatography with spectrometry detector (GC-MSD). Extraction temperature was found to be significant (p < 0.05) in increasing the amount of selected VOCs (ethyl acetate, methyl isobutyrate and butanoic acid methyl ester). Based on the maximum amount of these VOCs, the optimum operating extraction conditions for HS-SPME were set up at temperature of 30 °C, time of 29 min and salt addition of 1 g. The optimized HS-SPME conditions were employed for the extraction of VOCs from pineapple of different varieties.
    Matched MeSH terms: Spectrum Analysis
  5. Fulltext Morphological and optical properties of graphene film synthesized from waste of industrial cooking oil, AYAMAS using DTCVD method
    Mohd Muzamir Mahat, Nurfazianawatie Mohd Zin, Nurul Afaah Abdullah, Salifairus Mohammad Jafar, Mohd Firdaus Malek, M. Rusop, et al.
    Science Letters, 2020;14(2):24-33.
    MyJurnal
    The synthesis of graphene by double thermal chemical vapor deposition (DTCVD) using waste of industrial cooking oil (WICO) as a natural carbon source was investigated. The synthesis parameter (Argon gas flow rate) was varied between 50sccm to 300sccm by 50sccm increments. The function of Argon gas is to provide ambient condition, remove the atmospheric air from the tube and could improve the crystallinity of graphene during synthesis. WICO (from AYAMAS food processing) was placed in the first furnace (precursor furnace) and nickel was placed in the second furnace (deposition furnace). During the synthesis, elevated quantities of carbon from the source material are separated and precipitated on the Nickel surface. The sample were characterized by using Field Emission Scanning Electron Microscopy (FESEM), X-Ray Diffraction (XRD), Energy Dispersive X-ray (EDX), and Ultraviolet Visible (UV-Vis) spectroscopy. Based on FESEM images, at 250sccm, hexagonal graphene formation was observed. Besides, optical properties can be seen by UV-Vis and as the results show that 250sccm is the highest reflectivity value. Consequently, graphene synthesis from WICO using various Argon gas flow rate as precursor is successfully demonstrated.
    Matched MeSH terms: Spectrum Analysis
  6. Fulltext Radon concentration in workplace indoor air
    Abdullah Mohd Noh, Nordin Ayoub, Siti Zurina Mat Noor, Norhafizah Zahari, Mardhiyati Mohd Yunus
    Journal of Occupational Safety and Health, 2019;16(1):19-25.
    MyJurnal
    Radon exists naturally in the air. It can accumulate inside the buildings which may affect the indoor air quality. Radon is a radioactive gas that produces alpha particles during decay time. The alpha particles might cause harm to the human lungs and stomach. Inhalation of radon is one of the causes of lung cancer disease. Samples of inhaled radon in different rooms at the workplace were taken hourly through a passive diffusion chamber. The detection method was done using Alpha Spectrometry. The short term measurement was applied in the study to monitor the average weekly radon reading in different rooms in the Medical Imaging Laboratory of the University of Selangor (UNISEL). All tested rooms showed the existence of radon gas with different concentrations. Some of them showed the maximum reading of radon concentration which was higher than the radon action level of 148Bq/m3 or 4pCi/l. Their weekly average of radon concentration is contributing almost 50% of the accumulated radon concentration in the laboratory. It is highly recommended that monitoring the concentration of radon in indoor air is performed to ensure it is at a safe and healthy level.
    Matched MeSH terms: Spectrum Analysis
  7. Fulltext Photocatalytic Properties of Graphene/Gold and Graphene Oxide/Gold Nanocomposites Synthesized by Pulsed Laser Induced Photolysis
    Chen LH, Shen HT, Chang WH, Khalil I, Liao SY, A Yehye W, et al.
    Nanomaterials (Basel), 2020 Oct 07;10(10).
    PMID: 33036455 DOI: 10.3390/nano10101985
    Graphene (Gr)/gold (Au) and graphene-oxide (GO)/Au nanocomposites (NCPs) were synthesized by performing pulsed-laser-induced photolysis (PLIP) on hydrogen peroxide and chloroauric acid (HAuCl4) that coexisted with Gr or GO in an aqueous solution. A 3-month-long aqueous solution stability was observed in the NCPs synthesized without using surfactants and additional processing. The synthesized NCPs were characterized using absorption spectroscopy, transmission electron microscopy, Raman spectroscopy, energy dispersive spectroscopy, and X-ray diffraction to prove the existence of hybrid Gr/Au or GO/Au NCPs. The synthesized NCPs were further evaluated using the photocatalytic reaction of methylene blue (MB), a synthetic dye, under UV radiation, visible light (central wavelength of 470 nm), and full spectrum of solar light. Both Gr/Au and GO/Au NCPs exhibited photocatalytic degradation of MB under solar light illumination with removal efficiencies of 92.1% and 94.5%, respectively.
    Matched MeSH terms: Spectrum Analysis, Raman
  8. Fulltext Growth and metal uptake of spinach with application of co-compost of cat manure and spent coffee ground
    Mohd Noor Keeflee SNK, Wan Mohd Zain WNA, Mohd Nor MN, Jamion NA, Yong SK
    Heliyon, 2020 Sep;6(9):e05086.
    PMID: 33015401 DOI: 10.1016/j.heliyon.2020.e05086
    Cat manure (CM) possesses high level of nutrients for growing food crop. However, animal manure may contain toxic elements that may contaminate food crop. Spent coffee ground (SCG) may be used to reduce mobility of heavy metals and reduce crop uptake. In this study, SCG was composted with CM for 31 days to produce a co-compost (SCG-CM) for growing spinach (Spinacia oleracea). The growth rate of spinach was assessed until its maturity, and the metal uptake of spinach shoot was determined thereafter using inductively coupled plasma-optical emission spectroscopy (ICP-OES). The effect of soil treatment with SCG-CM on the height and elemental composition of spinach were compared with that of chicken manure compost (CMC). The prepared composts were primarily organic matter (72.9-81.4 % w/w) with the rest are ash (13.3-23.4 % w/w) and moisture (1.2-2.6 % w/w). Zinc content in SCG-CM (1261 ± 0.1 mg/kg) is significantly higher than that of soil and CMC (p < 0.05) and has exceeded the maximum permissible limit set by European Union Standard (2002) and the Malaysian Compost Quality Standard and Guidelines (2000). Matured spinach reached maximum plant height after 33 days. The amendment of SCG-CM significantly increased the height of spinach (32 ± 6 cm) compared to that of CMC (13 ± 1 cm) (p < 0.05). However, contents of Zn, Cu, Pb and Cd were not increased for spinach grown in the SCG-CM-amended soil, and the level of those elements are below permissible limit set by the Malaysian Food Act 1983 and Food Regulations 1985. This study shows that SCG-CM is effective in improving yield without causing accumulation of toxic trace elements in spinach.
    Matched MeSH terms: Spectrum Analysis
  9. Fulltext Characterisation of aptamer-anchored poly(EDMA-co-GMA) monolith for high throughput affinity binding
    Acquah C, Chan YW, Pan S, Yon LS, Ongkudon CM, Guo H, et al.
    Sci Rep, 2019 10 10;9(1):14501.
    PMID: 31601836 DOI: 10.1038/s41598-019-50862-1
    Immobilisation of aptameric ligands on solid stationary supports for effective binding of target molecules requires understanding of the relationship between aptamer-polymer interactions and the conditions governing the mass transfer of the binding process. Herein, key process parameters affecting the molecular anchoring of a thrombin-binding aptamer (TBA) onto polymethacrylate monolith pore surface, and the binding characteristics of the resulting macroporous aptasensor were investigated. Molecular dynamics (MD) simulations of the TBA-thrombin binding indicated enhanced Guanine 4 (G4) structural stability of TBA upon interaction with thrombin in an ionic environment. Fourier-transform infrared spectroscopy and thermogravimetric analyses were used to characterise the available functional groups and thermo-molecular stability of the immobilised polymer generated with Schiff-base activation and immobilisation scheme. The initial degradation temperature of the polymethacrylate stationary support increased with each step of the Schiff-base process: poly(Ethylene glycol Dimethacrylate-co-Glycidyl methacrylate) or poly(EDMA-co-GMA) [196.0 °C (±1.8)]; poly(EDMA-co-GMA)-Ethylenediamine [235.9 °C (±6.1)]; poly(EDMA-co-GMA)-Ethylenediamine-Glutaraldehyde [255.4 °C (±2.7)]; and aptamer-modified monolith [273.7 °C (±2.5)]. These initial temperature increments reflected in the associated endothermic energies were determined with differential scanning calorimetry. The aptameric ligand density obtained after immobilisation was 480 pmol/μL. Increase in pH and ionic concentration affected the surface charge distribution and the binding characteristics of the aptamer-modified disk-monoliths, resulting in the optimum binding pH and ionic concentration of 8.0 and 5 mM Mg2+, respectively. These results are critical in understanding and setting parametric constraints indispensable to develop and enhance the performance of aptasensors.
    Matched MeSH terms: Spectrum Analysis
  10. Fulltext Membrane Surface-Enhanced Raman Spectroscopy for Cholesterol-Modified Lipid Systems: Effect of Gold Nanoparticle Size
    Faried M, Suga K, Okamoto Y, Shameli K, Miyake M, Umakoshi H
    ACS Omega, 2019 Aug 27;4(9):13687-13695.
    PMID: 31497686 DOI: 10.1021/acsomega.9b01073
    A gold nanoparticle (AuNP) has a localized surface plasmon resonance peak depending on its size, which is often utilized for surface-enhanced Raman scattering (SERS). To obtain information on the cholesterol (Chol)-incorporated lipid membranes by SERS, AuNPs (5, 100 nm) were first functionalized by 1-octanethiol and then modified by lipids (AuNP@lipid). In membrane surface-enhanced Raman spectroscopy (MSERS), both signals from 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) and Chol molecules were enhanced, depending on preparation conditions (size of AuNPs and lipid/AuNP ratio). The enhancement factors (EFs) were calculated to estimate the efficiency of AuNPs on Raman enhancement. The size of AuNP100nm@lipid was 152.0 ± 12.8 nm, which showed an surface enhancement Raman spectrum with an EF2850 value of 111 ± 9. The size of AuNP5nm@lipid prepared with a lipid/AuNP ratio of 1.38 × 104 (lipid molecule/particle) was 275.3 ± 20.2 nm, which showed the highest enhancement with an EF2850 value of 131 ± 21. On the basis of fluorescent probe analyses, the membrane fluidity and polarity of AuNP@lipid were almost similar to DOPC/Chol liposome, indicating an intact membrane of DOPC/Chol after modification with AuNPs. Finally, the membrane properties of AuNP@lipid systems were also discussed on the basis of the obtained MSERS signals.
    Matched MeSH terms: Spectrum Analysis, Raman
  11. Potential colorimetric detection of cancer cells using Phenol Red
    Amran EN, Sudik S, Omar AF, Mail MH, Seeni A
    Photodiagnosis Photodyn Ther, 2019 Sep;27:380-384.
    PMID: 31301437 DOI: 10.1016/j.pdpdt.2019.07.006
    The objective of this research is to examine the relationship between the color changes of phenol red and the growth of cancer cells, i.e., HeLa and DU145 cells, over a specific period of time. Normal mouse skin fibroblasts (L929 cells) were used as a reference. In this research, the color changes of phenol red due to the acidification of the cell culture medium from the growth of the cells over a period of nine hours showed potential colorimetric characteristics of cancer cells. The color changes of phenol red were observed using visible absorbance spectroscopy. The transformation of the absorbance spectra into coefficients of determination against the examined range of wavelengths created a distinctive spectral signature that signifies phenol red discoloration in cancer and normal cell culture lines.
    Matched MeSH terms: Spectrum Analysis
  12. Surface-modified nanocrystalline cellulose from oil palm empty fruit bunch for effective binding of curcumin
    Foo ML, Tan CR, Lim PD, Ooi CW, Tan KW, Chew IML
    Int J Biol Macromol, 2019 Oct 01;138:1064-1071.
    PMID: 31301392 DOI: 10.1016/j.ijbiomac.2019.07.035
    Rod-shape particles have been a good drug carrier due to the long circulatory time, tumor accumulation and high cellular uptake in body. Acid-hydrolysed nanocrystalline cellulose (NCC) from empty fruit bunch exhibited a width of 13-30nm and a length of 150-360nm in rod-shape structure. NCC holds good potential as a bio-based drug carrier owing to its biodegradability and biocompatibility. Fourier-transform infrared spectroscopy results confirmed the binding of curcumin onto the NCC modified with tannic acid (TA) and decylamine (DA). TA-DA modification rendered NCC with a higher level of hydrophobicity, as evidenced by a substantial increase in contact angle from 45° to 73°. The modified NCC had the curcumin-binding efficiency in the range of 95-99%, which is at least twofold higher than the unmodified NCC at any curcumin concentration tested. This remarkable curcumin-binding effciency was comparable to that of commercialized NCC from wood-based origin. This work suggests NCC as a superior and sustainable drug carrier, while TA-DA modification is a promising approach to alter the surface property of NCC for an efficient binding of curcumin.
    Matched MeSH terms: Spectrum Analysis
  13. Fulltext Carbon Nanotube-Quicklime Nanocomposites Prepared Using a Nickel Catalyst Supported on Calcium Oxide Derived from Carbonate Stones
    Ibrahim R, Hussein MZ, Yusof NA, Abu Bakar F
    Nanomaterials (Basel), 2019 Aug 31;9(9).
    PMID: 31480466 DOI: 10.3390/nano9091239
    Carbon nanotube-quicklime nanocomposites (CQNs) have been synthesized via the chemical vapor deposition (CVD) of n-hexane using a nickel metal catalyst supported on calcined carbonate stones at temperatures of 600-900 °C. The use of a Ni/CaO(10 wt%) catalyst required temperatures of at least 700 °C to obtain XRD peaks attributable to carbon nanotubes (CNTs). The CQNs prepared using a Ni/CaO catalyst of various Ni contents showed varying diameters and the remaining catalyst metal particles could still be observed in the samples. Thermogravimetric analysis of the CQNs showed that there were two major weight losses due to the amorphous carbon decomposition (300-400 °C) and oxidation of CNTs (400-600 °C). Raman spectroscopy results showed that the CQNs with the highest graphitization were synthesized using Ni/CaO (10 wt%) at 800 °C with an IG/ID ratio of 1.30. The cyclic voltammetry (CV) of screen-printed carbon electrodes (SPCEs) modified with the CQNs showed that the performance of nanocomposite-modified SPCEs were better than bare SPCEs. When compared to carboxylated multi-walled carbon nanotubes or MWNT-COOH-modified SPCEs, the CQNs synthesized using Ni/CaO (10 wt%) at 800 °C gave higher CV peak currents and comparable electron transfer, making it a good alternative for screen-printed electrode modification.
    Matched MeSH terms: Spectrum Analysis, Raman
  14. Characterization of raw and alkali treated new natural cellulosic fibers from Tridax procumbens
    Vijay R, Lenin Singaravelu D, Vinod A, Sanjay MR, Siengchin S, Jawaid M, et al.
    Int J Biol Macromol, 2019 Mar 15;125:99-108.
    PMID: 30528990 DOI: 10.1016/j.ijbiomac.2018.12.056
    The aim of this study is to investigate natural cellulosic fibers extracted from Tridax procumbens plants. The obtained fibers were alkali treated for their effective usage as reinforcement in composites. The physical, chemical, crystallinity, thermal, wettability and surface characteristics were analyzed for raw, and alkali treated Tridax procumbens fibers (TPFs). The test results conclude that there was an increase in cellulose content with a reduction in hemicellulose, lignin, and wax upon alkali treatment. This enhanced the thermal stability, tensile strength, crystallinity, and surface roughness characteristics. The contact angle was also lesser for treated TPFs which prove its better wettability with the liquid phase. The Weibull distribution analysis was adopted for the analysis of the fiber diameter and tensile properties. Thus the considerable improvement in the properties of alkali treated TPFs would be worth for developing high-performance polymer composites.
    Matched MeSH terms: Spectrum Analysis
  15. Surface modification and characterization of carbonaceous adsorbents for the efficient removal of oil pollutants
    Anjum H, Johari K, Appusamy A, Gnanasundaram N, Thanabalan M
    J Hazard Mater, 2019 11 05;379:120673.
    PMID: 31254791 DOI: 10.1016/j.jhazmat.2019.05.066
    In this study, the impact of different oxidizing agents on the structural integrity of activated carbon (AC) and multiwalled carbon nanotubes (MWCNTs) was studied for the removal of BTX from aqueous solution. Seven different combinations of green oxidizing agents (mild organic acids) in conjugation with NaOCl (basic oxidizing agent) were used. The modified adsorbents were analyzed by Brunauer, Emmett, and Teller (BET) surface area analyzer, Fourier transform infrared spectroscopy (FTIR), Boehm titration, Raman spectroscopy, thermal gravimetric analysis (TGA), x-ray diffraction (XRD), zeta potential, and variable pressure field emission scanning electron microscope (VPFESEM). The results suggested that the carbonaceous sorbents modified with combination of citric acid tartaric acid, malic acid and salicylic acid (CTMS-I) showed increased surface area (O-AC: 871.67 m2/g, O-MWCNTs: 336.37 m2/g) and total pore volume (O-AC: 0.59 cm3/g, O-MWCNTs: 0.04 cm3/g), with the significantly improved thermal stability. Preliminary batch adsorption experiments conducted using the present prepared O-AC and O-MWCNTs, showed an improved performance towards the adsorption of BTX, compared with other available reported adsorbents in the literature.
    Matched MeSH terms: Spectrum Analysis, Raman
  16. Fulltext Poly(2,6-Dimethyl-1,4-Phenylene Oxide)-Based Hydroxide Exchange Separator Membranes for Zinc-Air Battery
    Abbasi A, Hosseini S, Somwangthanaroj A, Mohamad AA, Kheawhom S
    Int J Mol Sci, 2019 Jul 26;20(15).
    PMID: 31357565 DOI: 10.3390/ijms20153678
    Rechargeable zinc-air batteries are deemed as the most feasible alternative to replace lithium-ion batteries in various applications. Among battery components, separators play a crucial role in the commercial realization of rechargeable zinc-air batteries, especially from the viewpoint of preventing zincate (Zn(OH)42-) ion crossover from the zinc anode to the air cathode. In this study, a new hydroxide exchange membrane for zinc-air batteries was synthesized using poly (2,6-dimethyl-1,4-phenylene oxide) (PPO) as the base polymer. PPO was quaternized using three tertiary amines, including trimethylamine (TMA), 1-methylpyrolidine (MPY), and 1-methylimidazole (MIM), and casted into separator films. The successful synthesis process was confirmed by proton nuclear magnetic resonance and Fourier-transform infrared spectroscopy, while their thermal stability was examined using thermogravimetric analysis. Besides, their water/electrolyte absorption capacity and dimensional change, induced by the electrolyte uptake, were studied. Ionic conductivity of PPO-TMA, PPO-MPY, and PPO-MIM was determined using electrochemical impedance spectroscopy to be 0.17, 0.16, and 0.003 mS/cm, respectively. Zincate crossover evaluation tests revealed very low zincate diffusion coefficient of 1.13 × 10-8, and 0.28 × 10-8 cm2/min for PPO-TMA, and PPO-MPY, respectively. Moreover, galvanostatic discharge performance of the primary batteries assembled using PPO-TMA and PPO-MPY as initial battery tests showed a high specific discharge capacity and specific power of ~800 mAh/gZn and 1000 mWh/gZn, respectively. Low zincate crossover and high discharge capacity of these separator membranes makes them potential materials to be used in zinc-air batteries.
    Matched MeSH terms: Spectrum Analysis
  17. Fulltext Green Synthesis and Characterization of Pullulan Mediated Silver Nanoparticles through Ultraviolet Irradiation
    Khan MJ, Kumari S, Shameli K, Selamat J, Sazili AQ
    Materials (Basel), 2019 Jul 26;12(15).
    PMID: 31357398 DOI: 10.3390/ma12152382
    Nanoparticles (NPs) are, frequently, being utilized in multi-dimensional enterprises. Silver nanoparticles (AgNPs) have attracted researchers in the last decade due to their exceptional efficacy at very low volume and stability at higher temperatures. Due to certain limitations of the chemical method of synthesis, AgNPs can be obtained by physical methods including sun rays, microwaves and ultraviolet (UV) radiation. In the current study, the synthesis of pullulan mediated silver nanoparticles (P-AgNPs) was achieved through ultraviolet (UV) irradiation, with a wavelength of 365 nm, for 96 h. P-AgNPs were formed after 24 h of UV-irradiation time and expressed spectra maxima as 415 nm, after 96 h, in UV-vis spectroscopy. The crystallographic structure was "face centered cubic (fcc)" as confirmed by powder X-ray diffraction (PXRD). Furthermore, high resolution transmission electron microscopy (HRTEM) proved that P-AgNPs were covered with a thin layer of pullulan, with a mean crystalline size of 6.02 ± 2.37. The average lattice fringe spacing of nanoparticles was confirmed as 0.235 nm with quasi-spherical characteristics, by selected area electron diffraction (SAED) analysis. These green synthesized P-AgNPs can be utilized efficiently, as an active food and meat preservative, when incorporated into the edible films.
    Matched MeSH terms: Spectrum Analysis
  18. Fulltext Evaluation of serum and salivary alkaline phosphatase levels in chronic periodontitis patients before and after nonsurgical periodontal therapy
    Jeyasree RM, Theyagarajan R, Sekhar V, Navakumar M, Mani E, Santhamurthy C
    J Indian Soc Periodontol, 2019 1 12;22(6):487-491.
    PMID: 30631226 DOI: 10.4103/jisp.jisp_133_18
    Background: The traditional method of diagnosing periodontitis includes the assessment of clinical parameters and radiographic aids to evaluate the periodontal tissue destruction. Saliva has the potential to be used as the diagnostic fluid for oral disease. This study aimed at comparing the quantitative levels of alkaline phosphatase (ALP) in saliva and serum before and after scaling and root planing in patients with chronic generalized periodontitis.

    Materials and Methods: A total number of 50 participants (40 with chronic generalized periodontitis and 10 periodontally healthy volunteers) of 30-50 years were included in the study. Clinical parameters such as simplified oral hygiene index (OHI-S), gingival index, probing depth, and clinical attachment loss (CAL) were measured, and then, saliva and blood sample collection was done and analyzed for ALP levels by spectrometry. The clinical parameters along with saliva and serum ALP levels were reevaluated after 30 days following Phase I periodontal therapy. The results were statistically analyzed using paired t-test and one-way ANOVA.

    Results: The saliva and serum ALP levels were significantly increased in patients with chronic generalized periodontitis with an increase in clinical parameters such as OHI-S, gingival index, probing depth, and CAL when compared with periodontally healthy individuals. The saliva and serum ALP levels were significantly decreased following Phase I periodontal, therapy along with improvement in clinical parameters.

    Conclusion: With the limitations of the present study, it could be concluded that ALP levels in saliva can be used for the diagnosis of active phase of periodontal disease and also for evaluation of the treatment outcomes following Phase I periodontal therapy.

    Matched MeSH terms: Spectrum Analysis
  19. Fulltext In vivo detection of monosodium urate crystal deposits by Raman spectroscopy-a pilot study
    Abhishek A, Curran DJ, Bilwani F, Jones AC, Towler MR, Doherty M
    Rheumatology (Oxford), 2016 Feb;55(2):379-80.
    PMID: 26342227 DOI: 10.1093/rheumatology/kev339
    Study done in England
    Matched MeSH terms: Spectrum Analysis, Raman
  20. Fulltext Recent Progress on Stability and Thermo-Physical Properties of Mono and Hybrid towards Green Nanofluids
    Zainon SNM, Azmi WH
    Micromachines (Basel), 2021 Feb 11;12(2).
    PMID: 33670250 DOI: 10.3390/mi12020176
    Many studies have shown the remarkable enhancement of thermo-physical properties with the addition of a small quantity of nanoparticles into conventional fluids. However, the long-term stability of the nanofluids, which plays a significant role in enhancing these properties, is hard to achieve, thus limiting the performance of the heat transfer fluids in practical applications. The present paper attempts to highlight various approaches used by researchers in improving and evaluating the stability of thermal fluids and thoroughly explores various factors that contribute to the enhancement of the thermo-physical properties of mono, hybrid, and green nanofluids. There are various methods to maintain the stability of nanofluids, but this paper particularly focuses on the sonication process, pH modification, and the use of surfactant. In addition, the common techniques to evaluate the stability of nanofluids are undertaken by using visual observation, TEM, FESEM, XRD, zeta potential analysis, and UV-Vis spectroscopy. Prior investigations revealed that the type of nanoparticle, particle volume concentration, size and shape of particles, temperature, and base fluids highly influence the thermo-physical properties of nanofluids. In conclusion, this paper summarized the findings and strategies to enhance the stability and factors affecting the thermal conductivity and dynamic viscosity of mono and hybrid of nanofluids towards green nanofluids.
    Matched MeSH terms: Spectrum Analysis
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links