Several parameters on the oviposition site preference of Aedes albopictus were studied, including color, container type, salinity, and water type. Dark-colored glass jars, especially black, blue, and red ones were preferred over light-colored jars. The black-colored ovitrap with a paper strip performed better than other types of containers. Seasoned tap water had the highest egg count when compared with a saline water series. In addition, water that had previously been used for the culture of Ae. albopictus was the most preferred for oviposition. The significance of this study in conjunction with the present Aedes mosquito surveillance and monitoring program is discussed.
Trichoderma spp., a known beneficial fungus is reported to have several mechanisms to enhance plant growth. In this study, the effectiveness of seven isolates of Trichoderma spp. to promote growth and increase physiological performance in rice was evaluated experimentally using completely randomized design under greenhouse condition. This study indicated that all the Trichoderma spp. isolates tested were able to increase several rice physiological processes which include net photosynthetic rate, stomatal conductance, transpiration, internal CO2 concentration and water use efficiency. These Trichoderma spp. isolates were also able to enhance rice growth components including plant height, leaf number, tiller number, root length and root fresh weight. Among the Trichoderma spp. isolates, Trichoderma sp. SL2 inoculated rice plants exhibited greater net photosynthetic rate (8.66 μmolCO2 m(-2) s(-1)), internal CO2 concentration (336.97 ppm), water use efficiency (1.15 μmoCO2/mmoH2O), plant height (70.47 cm), tiller number (12), root length (22.5 cm) and root fresh weight (15.21 g) compared to the plants treated with other Trichoderma isolates tested. We conclude that beneficial fungi can be used as a potential growth promoting agent in rice cultivation.
The emergence of antibiotic resistance among multidrug-resistant (MDR) microbes is of growing concern, and threatens public health globally. A total of 129 Escherichia coli isolates were recovered from lowland aqueous environments near hospitals and medical service centers in the vicinity of Kuala Lumpur, Malaysia. Among the eleven antibacterial agents tested, the isolates were highly resistant to trimethoprim-sulfamethoxazole (83.7%) and nalidixic acid (71.3%) and moderately resistant to ampicillin and chloramphenicol (66.7%), tetracycline (65.1%), fosfomycin (57.4%), cefotaxime (57.4%), and ciprofloxacin (57.4%), while low resistance levels were found with aminoglycosides (kanamycin, 22.5%; gentamicin, 21.7%). The presence of relevant resistance determinants was evaluated, and the genotypic resistance determinants were as follows: sulfonamides (sulI, sulII, and sulIII), trimethoprim (dfrA1 and dfrA5), quinolones (qnrS), β-lactams (ampC and blaCTX-M), chloramphenicol (cmlA1 and cat2), tetracycline (tetA and tetM), fosfomycin (fosA and fosA3), and aminoglycosides (aphA1 and aacC2). Our data suggest that multidrug-resistant E. coli strains are ubiquitous in the aquatic systems of tropical countries and indicate that hospital wastewater may contribute to this phenomenon.
Matched MeSH terms: Water Microbiology*; Waste Water/microbiology*
The demand for durable, resistant, and high-strength structural material has led to the use of fibers as reinforcing elements. This paper presents an investigation into the inclusion of chopped steel wool fibers (CSWFs) in cement to form a high-flexural strength cementitious composite matrix (CCM). CSWFs were used as the primary reinforcement in CCM at increments of 0.5 wt%, from 0.5-6 wt%, with ratios of cement to sand of 1:1.5 and water to cement of 0.45. The inclusion of CSWFs resulted in an excellent optimization of the physicomechanical properties of the CCM, such as its density (2.302 g/cm3), compressive strength (61.452 MPa), and maximum flexural strength (10.64 MPa), all of which exceeded the performances of other reinforcement elements reported in the literature.
Pulau Tioman is a popular tourist island off the east coast of Peninsula Malaysia, known for its vast areas of intact vegetation. Six tick species have been recorded on the island but little is known about their local ecology or public health importance. To facilitate studies of the tick fauna of Pulau Tioman, a checklist of all species and host associations is presented with the first host records, from Pulau Tioman, of Amblyomma helvolum from the Asian water monitor (Varanus salvator) and Amblyomma varanense from the keeled rat snake (Ptyas carinata). A pictorial key is also presented for all tick species known from the island.
We report the complete genome sequence of Bacillus sp. strain PR5, isolated from a river receiving hospital and urban wastewater in Malaysia, which demonstrated a high capability for degrading prazosin. This genome sequence of 4,525,264 bp exhibited 41.5% GC content, 4,402 coding sequences, and 32 RNAs.
Increased disposal of heavy metals, including lead (II) (Pb(II)) into the environment calls for a reliable and sustainable solution. In this study, nano-sized biochar from sago activated sludge was proposed for the removal of Pb(II). Sago activated sludge was pyrolysed in a tube furnace followed by a chemical activation to yield nano-sized particles ranging from 45 to 75 nm. The nano-sized biochar obtained was characterised and the influence of pH (2 – 10), initial Pb(II) concentration (1 – 5 mg/L), contact time (30 – 90 mins) and adsorbent dosage (0.1 – 0.5 g) was investigated in a batch adsorption study. Response surface methodology (RSM) approach with central composite design (CCD) was used as statistical tools to optimize the adsorption process by relating the mutual interactions among all studied variables. Characterisation of the prepared adsorbent showed that large surface area was observed on sludge activated carbon (78.863 m2 /g) compared with sludge biochar (8.044 m2 /g) and sludge biomass (1.303 m2 /g). The batch adsorption best fitted the Langmuir isotherm (maximum adsorption capacity, Q0 = 3.202 × 10-3 mg/g, R-squared value = 0.9308). The RSM indicated that the optimum Pb(II) removal (99.87%) was at 0.5 g of adsorbent, 5 mg/L initial concentration and 30 min contact time. This study is significant because utilisation of sago effluent will reduce sago manufacturing waste by conversion into a value-added product as adsorbent to adsorb Pb(II) in wastewater.
In the past few decades, there has been a rapid growth in the concentration of nitrogenous compounds such as nitrate-nitrogen and ammonia-nitrogen in rivers, primarily due to increasing agricultural and industrial activities. These nitrogenous compounds are mainly responsible for eutrophication when present in river water, and for 'blue baby syndrome' when present in drinking water. High concentrations of these compounds in rivers may eventually lead to the closure of treatment plants. This study presents a training and a selection approach to develop an optimum artificial neural network model for predicting monthly average nitrate-N and monthly average ammonia-N. Several studies have predicted these compounds, but most of the proposed procedures do not involve testing various model architectures in order to achieve the optimum predicting model. Additionally, none of the models have been trained for hydrological conditions such as the case of Malaysia. This study presents models trained on the hydrological data from 1981 to 2017 for the Langat River in Selangor, Malaysia. The model architectures used for training are General Regression Neural Network (GRNN), Multilayer Neural Network and Radial Basis Function Neural Network (RBFNN). These models were trained for various combinations of internal parameters, input variables and model architectures. Post-training, the optimum performing model was selected based on the regression and error values and plot of predicted versus observed values. Optimum models provide promising results with a minimum overall regression value of 0.92.
Tapinoma indicum is a household pest that is widely distributed in Asian countries. It is known as nuisance pest that causes annoyance and disturbance by constructing nests and foraging in building for food and water. This article documents the draft genome dataset of T. indicum collected in Penang Island, Malaysia using the next-generation sequencing known as the Illumina platform. This article presents the pair-end 150 bp genome dataset and the quality of the sequencing result. This dataset provides the information for further understanding of T. indicum in the molecular aspect and the opportunity to develop a novel method for pest control and regulation. The dataset is available under Sequence Read Archive (SRA) databases with the accession number SRR10848807.
Chronic pain - pain that persists for more than 3 months - is a global health problem and is associated with tremendous social and economic cost. Yet, current pain treatments are often ineffective, as pain is complex and influenced by numerous factors. Hypohydration was recently shown to increase ratings of pain in men, but studies in this area are limited (n = 3). Moreover, whether hypohydration also affects pain in women has not been examined. In women, changes in the concentrations of reproductive hormones across menstrual phases may affect pain, as well as the regulation of body water. This indicates potential interactions between the menstrual phase and hypohydration on pain, but this hypothesis has yet to be tested. This review examined the literature concerning the effects of the menstrual phase and hypohydration on pain, to explore how these factors may interact to influence pain. Future research investigating the combined effects of hypohydration and menstrual phase on pain is warranted, as the findings could have important implications for the treatment of pain in women, interpretation of previous research and the design of future studies.
The exponential growth of waste generation is posing serious environmental issues and thus requires urgent management and recycling action to achieve green sustainable development. Controlled low-strength material (CLSM) is a highly flowable cementitious backfill material with self-consolidating properties. The CLSM efficiency during construction and final performance at the site depends on its plastic properties. Plastic properties are responsible for workability, pumpability, stability, and lateral pressure on adjacent soils. This paper presents a critical review to date on the use of waste materials and/or by-products and their impacts on the plastic properties of the CLSM. Extensive previous studies demonstrated that the basic properties and content of waste materials as well as the amount of water in the mix design, play a dominant role in determining the plastic properties of CLSM. The discussed plastic properties of CLSM include flowability, bleeding, segregation, and hardening time, which are found to be inter-related. Proper mix design adjustment to accommodate the use of waste materials is possible to produce sustainable CLSM with acceptable plastic properties. Additionally, the discussion and analysis presented in this paper could provide a basis for future research advances and the development of sustainable CLSM prepared with waste materials.
A crude oil spill is a common issue during offshore oil drilling, transport and transfer to onshore. Second, the production of petroleum refinery effluent is known to cause pollution due to its toxic effluent discharge. Sea habitats and onshore soil biota are affected by total petroleum hydrocarbons (TPH) as a pollutant in their natural environment. Crude oil pollution in seawater, estuaries and beaches requires an efficient process of cleaning. To remove crude oil pollutants from seawater, various physicochemical and biological treatment methods have been applied worldwide. A biological treatment method using bacteria, fungi and algae has recently gained a lot of attention due to its efficiency and lower cost. This review introduces various studies related to the bioremediation of crude oil, TPH and related petroleum products by bioaugmentation and biostimulation or both together. Bioremediation studies mentioned in this paper can be used for treatment such as emulsified residual spilled oil in seawater with floating oil spill containment booms as an enclosed basin such as a bioreactor, for petroleum hydrocarbons as a pollutant that will help environmental researchers solve these problems and completely clean-up oil spills in seawater.
The combination of exceptional functionalities offered by 3D graphene-based macrostructures (GBMs) has attracted tremendous interest. 2D graphene nanosheets have a high chemical stability, high surface area and customizable porosity, which was extensively researched for a variety of applications including CO2 adsorption, water treatment, batteries, sensors, catalysis, etc. Recently, 3D GBMs have been successfully achieved through few approaches, including direct and non-direct self-assembly methods. In this review, the possible routes used to prepare both 2D graphene and interconnected 3D GBMs are described and analyzed regarding the involved chemistry of each 2D/3D graphene system. Improvement of the accessible surface of 3D GBMs where the interface exchanges are occurring is of great importance. A better control of the chemical mechanisms involved in the self-assembly mechanism itself at the nanometer scale is certainly the key for a future research breakthrough regarding 3D GBMs.
Stormwater runoff is a major concern in urban areas which is mostly the result of vast urbanization. To reduce urban stormwater runoff and improve water quality, low impact development (LID) is used in urban areas. Therefore, it is vital to find the optimal combination of LID controls to achieve maximum reduction in both stormwater runoff and pollutants with optimal cost. In this study, a simulation-optimization model was developed by linking the EPA Storm Water Management Model (SWMM) to the Multi-Objective Particle Swarm Optimization (MOPSO) using MATLAB. The coupled model could carry out multi-objective optimization (MOO) and find potential solutions to the optimization objectives using the SWMM simulation model outputs. The SWMM model was developed using data from the BUNUS catchment in Kuala Lumpur, Malaysia. The total suspended solids (TSS) and total nitrogen (TN) were selected as pollutants to be used in the simulation model. Vegetated swale and rain garden were selected as LID controls for the study area. The LID controls were assigned to the model using the catchment characteristics. The target objectives were to minimize peak stormwater runoff, TSS, and TN with the minimum number of LID controls applications. The LID combination scenarios were also tested in SWMM to identify the best LID types and combination to achieve maximum reduction in both peak runoff and pollutants. This study found that the peak runoff, TSS, and TN were reduced by 13%, 38%, and 24%, respectively. The optimal number of LID controls that could be used at the BUNUS catchment area was also found to be 25.
The title compound, Ph3(PhCH2)P(+)·Cl(-)·H2O, was obtained unintentionally as the product of an attempted synthesis of a silver di-thio-carbamate complex using benzyl-tri-phenyl-phospho-nium as the counter-ion. The asymmetric unit consists of a phospho-nium cation and a chloride anion, and a water mol-ecule of crystallization. In the crystal, the chloride ion is linked to the water mol-ecule by an O-H⋯Cl hydrogen bond. The three units are further linked via C-H⋯Cl and C-H⋯O hydrogen bonds and C-H⋯ π inter-actions, forming a three-dimensional structure.
In the title complex salt, [Au2{(C6H5)2PCH2P(C6H5)2}]Cl2·(CH3)2C=O·H2O, the dication forms an eight-membered {-PCPAu}2 ring with a transannular aurophilic inter-action [Au⋯Au = 2.9743 (2) Å]. The ring approximates a flattened boat conformation, with the two methyl-ene C atoms lying ca 0.58-0.59 Å above the least-squares plane defined by the Au2P4 atoms (r.m.s. deviation = 0.0849 Å). One Cl(-) anion functions as a weak bridge between the Au(I) atoms [Au⋯Cl = 2.9492 (13) and 2.9776 (12) Å]. The second Cl(-) anion forms two (water)O-H⋯Cl hydrogen bonds about a centre of inversion, forming a centrosymmetric eight-membered {⋯HOH⋯Cl}2 supra-molecular square. Globally, the dications and loosely associated Cl(-) anions assemble into layers lying parallel to the ac plane, being connected by C-H⋯Cl,π(phen-yl) inter-actions. The supra-molecular squares and solvent acetone mol-ecules are sandwiched in the inter-layer region, being connected to the layers on either side by C-H⋯Cl,O(acetone) inter-actions.
The full mol-ecule of the binuclear title compound, [Cd2Cl2(C6H8O4)(C6H8N2)2(H2O)2], is generated by the application of a centre of inversion located at the middle of the central CH2-CH2 bond of the adipate dianion; the latter chelates a CdII atom at each end. Along with two carboxyl-ate-O atoms, the CdII ion is coordinated by the two N atoms of the chelating benzene-1,2-di-amine ligand, a Cl- anion and an aqua ligand to define a distorted octa-hedral CdClN2O3 coordination geometry with the monodentate ligands being mutually cis. The disparity in the Cd-N bond lengths is related to the relative trans effect exerted by the Cd-O bonds formed by the carboxyl-ate-O and aqua-O atoms. The packing features water-O-H⋯O(carboxyl-ate) and benzene-1,2-di-amine-N-H⋯Cl hydrogen bonds, leading to layers that stack along the a-axis direction. The lack of directional inter-actions between the layers is confirmed by a Hirshfeld surface analysis.
The three dimensional free convection boundary layer flow near a stagnation point region is embedded in viscous nanofluid with the effect of g-jitter is studied in this paper. Copper (Cu) and aluminium oxide (Al2O3) types of water base nanofluid are cho- sen with the constant Prandtl number, Pr=6.2. Based on Tiwari-Das nanofluid model, the boundary layer equation used is converted into a non-dimensional form by adopting non- dimensional variables and is solved numerically by engaging an implicit finite-difference scheme known as Keller-box method. Behaviors of fluid flow such as skin friction and Nusset number are studied by the controlled parameters including oscillation frequency, amplitude of gravity modulation and nanoparticles volume fraction. The reduced skin friction and Nusset number are presented graphically and discussed for different values of principal curvatures ratio at the nodal point. The numerical results shows that, in- crement occurs in the values of Nusset number with the presence of solid nanoparticles together with the values of the skin friction. It is worth mentioning that for the plane stagnation point there is an absence of reduced skin friction along the y-direction where as for axisymmetric stagnation point, the reduced skin friction for both directions are the same. As nanoparticles volume fraction increased, the skin friction increased as well as the Nusset number. The results, indicated that skin frictions of copper are found higher than aluminium oxide.
An understanding of the inter-species relationships, especially their metabolic network in a mixed-culture system, is crucial to design an effective inoculum for enhancing the power generation of wastewater fed microbial fuel cell (MFC). In the present study, the influence of microbial mutualistic interactions on the power generation of palm oil mill effluent fed MFCs has been widely investigated by designing several co-culture and mixed culture inoculums. Among the different inoculum compositions, the highest power density of 14.8 W/m3 was achieved by Pseudomonas aeruginosa and Klebsiella variicola co-culture inoculum due to their synergistic relationships which were inter-linked via fermentation-based metabolites. Besides, the interaction of K. variicola and Bacillus cereus positively influenced the power generation resulting in a maximum power density of 11.8 W/m3 whereas the antagonistic relationship between B. cereus and P. aeruginosa resulted in a lower power generation of 1.9 W/m3. The microbial mutualistic interactions were investigated with polarization, cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), as well as by using metabolite and biofilm analysis. It was observed that the synergism between bacteria enhanced power generation through the production of higher electron shuttling mediators and efficient biofilm formation as evidenced by polarization, CV and EIS analysis. In contrast, the antagonistic relationship resulted in production of cell inhibiting metabolites leading to the formation of ineffective biofilm. These findings demonstrate that the synergistic interaction between or within microorganisms is emergent in designing co-culture or mixed-culture inoculum for achieving maximum power generation in MFCs.
A simplified modelling approach for illustrating the fate of emerging pollutants can improve risk assessment of these chemicals. Once released into aquatic environments, these pollutants will interact with various substances including suspended particles, colloidal or nano particles, which will greatly influence their distribution and ultimate fate. Understanding these interactions in aquatic environments continues to be an important issue because of their possible risk. In this study, bisphenol A (BPA) in the water column of Bentong River, Malaysia, was investigated in both its soluble and colloidal phase. A spatially explicit hydrological model was established to illustrate the associated dispersion processes of colloidal-bound BPA. Modelling results demonstrated the significance of spatial detail in predicting hot spots or peak concentrations of colloidal-bound BPA in the sediment and water columns as well. The magnitude and setting of such spots were system based and depended mainly on flow conditions. The results highlighted the effects of colloidal particles' concentration and density on BPA's removal from the water column. It also demonstrated the tendency of colloidal particles to aggregate and the impact all these processes had on BPA's transport potential and fate in a river water. All scenarios showed that after 7.5-10 km mark BPA's concentration started to reach a steady state with very low concentrations which indicated that a downstream transport of colloidal-bound BPA was less likely due to minute BPA levels.