Displaying publications 1 - 20 of 37 in total

Abstract:
Sort:
  1. High performance photoanodic catalyst prepared from an active organic photovoltaic cell - high potential gain from visible light
    Nagai K, Kuwabara T, Ahmad MF, Nakano M, Karakawa M, Taima T, et al.
    Chem Commun (Camb), 2019 Oct 15;55(83):12491-12494.
    PMID: 31573004 DOI: 10.1039/c9cc04759j
    Photoelectrochemical oxidation of thiols was enhanced with a threshold potential of -0.35 V vs. Ag/AgCl by the use of a ZnPc/PCBM:P3HT/ZnO electode, which was prepared by removing the PEDOT:PSS/Au electrode of an inverted OPV device and coating it with ZnPc. A co-photocatalysis property of ZnPc was observed in the photoelectrochemistry and scanning Kelvin probe microscopy.
    Matched MeSH terms: Sulfhydryl Compounds
  2. Fulltext Crystal structure of [μ2-1,1'-bis-(di-phenyl-phos-phanyl)ferrocene-κ(2) P:P']bis-[(pyrrolidine-1-carbo-dithioato-κS)gold(I)]
    Tan YS, Tiekink ER
    Acta Crystallogr E Crystallogr Commun, 2015 Oct 1;71(Pt 10):1143-6.
    PMID: 26594392 DOI: 10.1107/S2056989015016382
    The asymmetric unit of the title compound, {(C34H28FeP2)[Au(C5H8NS2)]2}, comprises half a mol-ecule, with the full mol-ecule being generated by the application of a centre of inversion. The independent Au(I) atom is coordinated by thiol-ate S and phosphane P atoms that define an approximate linear geometry [S-Au-P = 169.35 (3)°]. The deviation from the ideal linear is traced to the close approach of the (intra-molecular) non-coordinating thione S atom [Au⋯S = 3.1538 (8) Å]. Supra-molecular layers parallel to (100) feature in the crystal packing, being sustained by phen-yl-thione C-H⋯S inter-actions, with the non-coordinating thione S atom in the role of a dual acceptor. Layers stack with no specific inter-actions between them.
    Matched MeSH terms: Sulfhydryl Compounds
  3. A non-solvated form of [(Z)-O-methyl-N-(2-methyl-phen-yl)-thio-carbamato-κS](tri-phenyl-phosphane-κP)gold(I): crystal structure and Hirshfeld surface analysis
    Yeo CI, Tan SL, Tiekink ER
    Acta Crystallogr E Crystallogr Commun, 2016 Oct 1;72(Pt 10):1446-1452.
    PMID: 27746938
    The title compound, [Au(C9H10NOS)(C18H15P)], features a near linear P-Au-S arrangement defined by phosphane P and thiol-ate S atoms with the minor distortion from the ideal [P-Au-S is 177.61 (2)°] being traced in part to the close intra-molecular approach of an O atom [Au⋯O = 3.040 (2) Å]. The packing features supra-molecular layers lying parallel to (011) sustained by a combination of C-H⋯π and π-π [inter-centroid distance = 3.8033 (17) Å] inter-actions. The mol-ecular structure and packing are compared with those determined for a previously reported hemi-methanol solvate [Kuan et al. (2008 ▸). CrystEngComm, 10, 548-564]. Relatively minor differences are noted in the conformations of the rings in the Au-containing mol-ecules. A Hirshfeld surface analysis confirms the similarity in the packing with the most notable differences relating to the formation of C-H⋯S contacts between the constituents of the solvate.
    Matched MeSH terms: Sulfhydryl Compounds
  4. A monoclinic polymorph of [(Z)-N-(3-chloro-phen-yl)-O-methyl-thio-carbamato-κS](tri-phenyl-phosphane-κP)gold(I): crystal structure and Hirshfeld surface analysis
    Yeo CI, Tan SL, Tiekink ER
    Acta Crystallogr E Crystallogr Commun, 2016 Aug 1;72(Pt 8):1068-73.
    PMID: 27536384 DOI: 10.1107/S2056989016010781
    The title compound, [Au(C8H7ClNOS)(C18H15P)], is a monoclinic (P21/n, Z' = 1; form β) polymorph of the previously reported triclinic form (P-1, Z' = 1; form α) [Tadbuppa & Tiekink (2010 ▸). Acta Cryst. E66, m664]. The mol-ecular structures of both forms feature an almost linear gold(I) coordination geometry [P-Au-S = 175.62 (5)° in the title polymorph], being coordinated by thiol-ate S and phosphane P atoms, a Z conformation about the C=N bond and an intra-molecular Au⋯O contact. The major conformational difference relates to the relative orientations of the residues about the Au-S bond: the P-Au-S-C torsion angles are -8.4 (7) and 106.2 (7)° in forms α and β, respectively. The mol-ecular packing of form β features centrosymmetric aggregates sustained by aryl-C-H⋯O inter-actions, which are connected into a three-dimensional network by aryl-C-H⋯π contacts. The Hirshfeld analysis of forms α and β shows many similarities with the notable exception of the influence of C-H⋯O inter-actions in form β.
    Matched MeSH terms: Sulfhydryl Compounds
  5. New monoclinic form of {O-Ethyl N-(4-nitro-phen-yl)thio-carbamato-κS}(tri-4-tolyl-phosphane-κP)gold(I): crystal structure and Hirshfeld surface analysis
    Kuan FS, Jotani MM, Tiekink ERT
    Acta Crystallogr E Crystallogr Commun, 2017 Oct 01;73(Pt 10):1465-1471.
    PMID: 29250359 DOI: 10.1107/S2056989017012865
    The title phosphanegold(I) thiol-ate compound, [Au(C9H9N2O3S)(C21H21P)], is a second monoclinic polymorph (space group P21/c) that complements a previously reported Cc polymorph [Broker & Tiekink (2008 ▸). Acta Cryst. E64, m1582]. An SP donor set defines an approximately linear geometry about the gold atom in both forms. The key distinguishing feature between the present structure and the previously reported polymorph rests with the relative disposition of the thiol-ate ligand. In the title compound, the orientation is such to place the oxygen atom in close contact with the gold atom [Au⋯O = 2.915 (2) Å], in contrast to the aryl ring in the original polymorph. In the crystal, linear supra-molecular chains along the a-axis direction mediated by C-H⋯π and nitro-O⋯π inter-actions are found. These pack with no directional inter-actions between them. The analysis of the Hirshfeld surfaces for both forms of [Au(C9H9N3O3S)(C21H21P)] indicates quite distinctive inter-action profiles relating to the differences in inter-molecular contacts found in their respective crystals.
    Matched MeSH terms: Sulfhydryl Compounds
  6. Fulltext A crystallographic study of Bis[S-benzyl-5-bromo-2-oxoindolin-3-ylidenemethanehydrazonthioate] disulfide solvated with dimethylsulfoxide
    Mohd Abdul Fatah Abdul Manan, M. Ibrahim M. Tahir, Crouse, Karen A., How, Fiona N.-F., Watkin, David J.
    Scientific Research Journal, 2012;9(2):0-0.
    MyJurnal
    The crystal structure of the title compound has been determined. The compound crystallized in the triclinic space group P -1, Z = 2, V = 1839.42(18) Å3 and unit cell parameters a = 11.0460(6) Å, b = 13.3180(7) Å, c = 13.7321(8) Å, a = 80.659(3)°, ß = 69.800(3)° and ? = 77.007(2)° with one disordered dimethylsulfoxide solvent molecule with the sulfur and oxygen atoms are distributed over two sites; S101/S102 [site occupancy factors: 0.6035/0.3965] and O130/O131 [site occupancy factor 0.3965/0.6035]. The C22-S21 and C19-S20 bond distances of 1.779(7) Å and 1.788(8) Å indicate that both of the molecules are connected by the disulfide bond [S20-S21 2.055(2) Å] in its thiol form. The crystal structure reveals that both of the 5-bromoisatin moieties are trans with respect to the [S21-S20 and C19-N18] and [S20-S21 and C22-N23] bonds whereas the benzyl group from the dithiocarbazate are in the cis configuration with respect to [S21-S20 and C19-S44] and [S20-S21 and C22-S36] bonds. The crystal structure is further stabilized by intermolecular hydrogen bonds of N9-H35···O16 formed between the two molecules and N28-H281···O130, N28-H281···O131 and C41-H411···O131 with the solvent molecule.
    Matched MeSH terms: Sulfhydryl Compounds
  7. Fulltext Novel Corrosion Inhibitor for Mild Steel in HCl
    Al-Amiery AA, Kadhum AAH, Alobaidy AHM, Mohamad AB, Hoon PS
    Materials (Basel), 2014 Jan 27;7(2):662-672.
    PMID: 28788482 DOI: 10.3390/ma7020662
    Corrosion inhibitory effects of new synthesized compound namely 5,5'- ((1Z,1'Z)-(1,4-phenylenebis(methanylylidene))bis(azanylylidene))bis(1,3,4-thiadiazole-2-thiol) (PBB) on mild steel in 1.0 M HCl was investigated at different temperatures using open circuit potential (OCP), potentiodynamic polarization (PDP) and electrochemical impedance spectroscopy (EIS). Results showed that PBB inhibited mild steel corrosion in acid solution and indicated that the inhibition efficiencies increased with the concentration of inhibitor, but decreased proportionally with temperature. Changes in impedance parameters suggested the adsorption of PBB on the mild steel surface, leading to the formation of protective films.
    Matched MeSH terms: Sulfhydryl Compounds
  8. Synthesis, in vitro and in silico studies of S-alkylated 5-(4-methoxyphenyl)-4-phenyl-4H-1,2,4-triazole-3-thiols as cholinesterase inhibitors
    Arfan M, Siddiqui SZ, Abbasi MA, Rehman A, Shah SAA, Ashraf M, et al.
    Pak J Pharm Sci, 2018 Nov;31(6 (Supplementary):2697-2708.
    PMID: 30587482
    The research was aimed to unravel the enzymatic potential of sequentially transformed new triazoles by chemically converting 4-methoxybenzoic acid via Fischer's esterification to 4-methoxybenzoate which underwent hydrazinolysis and the corresponding hydrazide (1) was cyclized with phenyl isothiocyanate (2) via 2-(4-methoxybenzoyl)-N-phenylhydrazinecarbothioamide (3); an intermediate to 5-(4-methoxyphenyl)-4-phenyl-4H-1,2,4-triazol-3-thiol (4). The electrophiles; alkyl halides 5(a-g) were further reacted with nucleophilic S-atom to attain a series of S-alkylated 5-(4-methoxyphenyl)-4-phenyl-4H-1,2,4-triazole-3-thiols 6(a-g). Characterization of synthesized compounds was accomplished by contemporary spectral techniques such as FT-IR, 1H-NMR, 13C-NMR and EI-MS. Excellent cholinesterase inhibitory potential was portrayed by 3-(n-heptylthio)-5-(4-methoxyphenyl)-4-phenyl-4H-1,2,4-triazole; 6g against AChE (IC50; 38.35±0.62μM) and BChE (IC50; 147.75±0.67μM) enzymes. Eserine (IC50; 0.04±0.01μM) was used as reference standard. Anti-proliferative activity results ascertained that derivative encompassing long straight chain substituted at S-atom of the moiety was the most potent with 4.96 % cell viability (6g) at 25μM and with 2.41% cell viability at 50μMamong library of synthesized derivatives. In silico analysis also substantiated the bioactivity statistics.
    Matched MeSH terms: Sulfhydryl Compounds/chemical synthesis*; Sulfhydryl Compounds/metabolism
  9. Enhancing the biocompatibility of the polyurethane methacrylate and off-stoichiometry thiol-ene polymers by argon and nitrogen plasma treatment
    Chen TF, Siow KS, Ng PY, Majlis BY
    Mater Sci Eng C Mater Biol Appl, 2017 Oct 01;79:613-621.
    PMID: 28629060 DOI: 10.1016/j.msec.2017.05.091
    Our studies focused on improving the biocompatibility properties of two microfluidic prototyping substrates i.e. polyurethane methacrylate (PUMA) and off-stoichiometry thiol-ene (OSTE-80) polymer by Ar and N2plasma treatment. The contact angle (CA) measurement showed that both plasma treatments inserted oxygen and nitrogen moieties increased the surface energy and hydrophilicity of PUMA and OSTE-80 polymer which corresponded to an increase of nitrogen to carbon ratios (N/C), as measured by XPS, to provide a conducive environment for cell attachments and proliferation. Under the SEM observation, the surface topography of PUMA and OSTE-80 polymer showed minimal changes after the plasma treatments. Furthermore, ageing studies showed that plasma-treated PUMA and OSTE-80 polymer had stable hydrophilicity and nitrogen composition during storage in ambient air for 15days. After in vitro cell culture of human umbilical vein endothelial cells (HUVECs) on these surfaces for 24h and 72h, both trypan blue and alamar blue assays indicated that PUMA and OSTE-80 polymer treated with N2plasma had the highest viability and proliferation. The polar nitrogen moieties, specifically amide groups, encouraged the HUVECs adhesion on the plasma-treated PUMA and OSTE-80 surfaces. Interestingly, PUMA polymer treated with Ar and N2plasma showed different HUVECs morphology which was spindle and cobblestone-shaped respectively after 72h of incubation. On the contrary, a monolayer of well-spread HUVECs formed on the Ar and N2plasma-treated OSTE-80 polymers. These variable morphologies observed can be ascribed to the adherence HUVECs on the different elastic moduli of these surfaces whereby further investigation might be needed. Overall, Ar and N2plasma treatment had successfully altered the surface properties of PUMA and OSTE-80 polymer by increasing its surface energy, hydrophilicity and chemical functionalities to create a biocompatible surface for HUVECs adhesion and proliferation.
    Matched MeSH terms: Sulfhydryl Compounds
  10. Light exposure accelerates oxidative protein polymerization in beef stored in high oxygen atmosphere
    Zainudin MAM, Poojary MM, Jongberg S, Lund MN
    Food Chem, 2019 Nov 30;299:125132.
    PMID: 31299519 DOI: 10.1016/j.foodchem.2019.125132
    Protein oxidation of beef patties stored in high oxygen modified atmosphere packaging for 9 days was investigated. Meat was either stored in the dark, under light, or in the dark with addition of FeCl2/H2O2/myoglobin (forced oxidation). SDS-PAGE analysis showed high degree of protein polymerization for meat exposed to light, compared to the other samples. Light exposure induced reducible (disulfide) and non-reducible cross-links, while mainly disulfides were formed in meat stored in the dark. Light exposure was responsible for 58% loss of free thiols (Cys residues). No significant loss of other amino acid residues was observed and none of the most common oxidation products of tryptophan, tyrosine, and phenylalanine were detected. Intrinsic fluorescence measurements of tryptophan showed 27% loss in samples exposed to light, which was ascribed to loss of protein solubility via protein polymerization rather than tryptophan oxidation. Protein carbonyls were mainly detected in forced oxidized samples at Day 0.
    Matched MeSH terms: Sulfhydryl Compounds/chemistry
  11. Combination of light and oxygen accelerates formation of covalent protein-polyphenol bonding during chill storage of meat added 4-methyl catechol
    Zainudin MAM, Jongberg S, Lund MN
    Food Chem, 2021 Jan 01;334:127611.
    PMID: 32712493 DOI: 10.1016/j.foodchem.2020.127611
    Plant polyphenols applied as natural antioxidant ingredients, are known to bind to cysteine residues on meat proteins. The aim of this study was to examine the effect of light exposure on the formation of cysteine-phenol adduct in meat added 4-methylcatechol (4MC), a model polyphenol, during storage through quantitative LC-MS/MS-based analysis. Cysteine-4-methylcatechol adduct (Cys-4MC) formation in meat added 1500 ppm 4-MC increased significantly (by 50%) when stored under light in oxygen at 4 °C for 7 days as compared to storage in the dark. This was reflected by a significant decrease in thiol concentrations in the same sample. Gel electrophoresis showed loss in myosin heavy chain (MHC), and a resulting increase in cross-linked MHC (CL-MHC) and larger protein polymers in samples added 4MC. Protein blots stained with nitroblue tetrazolium (NBT) showed intensive protein-polyphenol binding in the meat samples added 4MC, but no major differences between storage conditions.
    Matched MeSH terms: Sulfhydryl Compounds/chemistry
  12. Effects of different polyaniline emeraldine compositions in electrodepositing ginsenoside encapsulated poly(lactic-co-glycolic acid) microcapsules coating: Physicochemical characterization and in vitro evaluation
    Lukman SK, Saidin S
    J Biomed Mater Res A, 2020 05;108(5):1171-1185.
    PMID: 31994824 DOI: 10.1002/jbm.a.36891
    Even though drug-eluting stent (DES) has prominently reduced restenosis, however, its complication of delayed endothelialization has caused chronic side effect. A coating of ginseng-based biodegradable polymer could address this issue due to its specific therapeutic values. However, deposition of this type of stable coating on metallic implant often scarce. Therefore, in this study, different polyaniline (PANI) emeraldine compositions were adopted to electrodeposit ginsenoside encapsulated poly(lactic-co-glycolic acid) microcapsules coating. The coating surfaces were analyzed using attenuated total reflectance-Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscopy, contact angle, and atomic force microscopy instruments. A month coating stability was then investigated with an evaluation of in vitro human umbilical vein endothelial cell analyses consisted of cytotoxicity and cells attachment assessments. The 1.5 mg PANI emeraldine has assisted the formation of stable, uniform, and rounded microcapsules coating with appropriate wettability and roughness. Less than 1.5 mg PANI emeraldine was not enough to drive the formation of microcapsules coating while greater than 1.5 mg caused the deposition of melted microcapsules. The similar coating also has promoted greater cells proliferation and attachment compared to other coating variation. Therefore, the utilization of electrodeposition to deposit a drug-based polymer coating could be implemented to develop DES, in accordance to stent implantation which ultimately aims for enrich endothelialization.
    Matched MeSH terms: Sulfhydryl Compounds/chemistry*
  13. S-phase arrest and apoptosis in human breast adenocarcinoma MCF-7 cells via mitochondrial dependent pathway induced by tricyclohexylphosphine gold (I) n-mercaptobenzoate complexes
    Pian AK, Foong CP, Hamid RA
    Life Sci, 2022 Dec 15;311(Pt B):121161.
    PMID: 36375571 DOI: 10.1016/j.lfs.2022.121161
    We have previously reported the inhibition of thioredoxin reductase (TrxR) and invasion by tricyclohexylphosphine gold (I) n-mercaptobenzoate (n = 2, 3, 4) labeled as 1-3 towards MCF-7 cells, in vitro. Nevertheless, the mode of death and its apoptotic pathway has yet to be revealed. The main aim of this study is to investigate the anti-neoplastic activity of this phosphanegold (I) thiolates against breast adenocarcinoma cells, MCF-7. Herein, we explored the role of gold(I) series, 1-3 for their apoptosis-inducing ability against MCF-7 cells. They were scrutinized for their antiproliferative activities which exhibited their IC50 values of 8.14 μM ± 0.10, 7.26 μM ± 0.33, and 9.03 μM ± 0.69, respectively, and indicated better cytotoxicities than that of cisplatin (positive control). Further, the mechanisms of their actions were studied by analyzing the status of ROS generation (by DCFH-DA), cytochrome c release (by ELISA), and activation of caspases 3/7, 8, 9, and 10, annexin V staining and cell cycle analysis by flow cytometry, respectively. It was observed that the compounds, 1-3 can promote ROS generation, cytochrome c release, and activation of caspases 3/7, caspase 8, caspase 9, and caspase 10 on MCF-7 cells. In addition, the compounds are shown to induce MCF-7 cell arrest at S-phase. Gene analysis via PCR array further clarified their effects by modulating the related genes upon the compounds' treatment. Further investigation on other breast cancer cells as well as in vivo studies on these compounds will further increase their potential as anti-breast cancer agents.
    Matched MeSH terms: Sulfhydryl Compounds/pharmacology
  14. Fulltext Synthesis of 4-(dimethylamino)pyridine propylthioacetate coated gold nanoparticles and their antibacterial and photophysical activity
    Anwar A, Khalid S, Perveen S, Ahmed S, Siddiqui R, Khan NA, et al.
    J Nanobiotechnology, 2018 Jan 29;16(1):6.
    PMID: 29378569 DOI: 10.1186/s12951-017-0332-z
    BACKGROUND: Gold nanoparticles are useful candidate for drug delivery applications and are associated with enhancement in the bioavailability of coated drugs and/or therapeutic agent. Since, heterocyclic compounds are known to exhibit antimicrobial potential against variety of pathogens, we designed this study to evaluate the antibacterial effects of gold nanoparticles conjugation with new synthesized cationic ligand; 4-Dimethyl aminopyridinium propylthioacetate (DMAP-PTA) in comparison with pure compound and antibiotic drug Pefloxacin. Antibacterial activity of DMAP-PTA coated gold nanoparticles was investigated against a fecal strain of E. coli (ATCC 8739).

    RESULTS: A new dimethyl aminopyridine based stabilizing agent named as DMAP-PTA was synthesized and used for stabilization of gold nanoparticles. Gold nanoparticles coated with DMAP-PTA abbreviated as DMAP-PTA-AuNPs were thoroughly characterized by UV-visible, FT-IR spectroscopic methods and transmission electron microscope before biological assay. DMAP-PTA, DMAP-PTA-AuNPs and Pefloxacin were examined for their antibacterial potential against E. coli, and the minimum inhibitory concentration (MIC) was determined to be 300, 200 and 50 µg/mL respectively. Gold nanoparticles conjugation was found to significantly enhance the antibacterial activity of DMAP-PTA as compared to pure compound. Moreover, effects of DMAP-PTA-AuNPs on the antibacterial potential of Pefloxacin was also evaluated by combination therapy of 1:1 mixture of DMAP-PTA-AuNPs and Pefloxacin against E. coli in a wide range of concentrations from 5 to 300 µg/mL. The MIC of Pefloxacin + DMAP-PTA-AuNPs mixture was found to be 25 µg/mL as compared to Pefloxacin alone (50 µg/mL), which clearly indicates that DMAP-PTA-AuNPs increased the potency of Pefloxacin. AFM analysis was also carried out to show morphological changes occur in bacteria before and after treatment of test samples. Furthermore, DMAP-PTA-AuNPs showed high selectivity towards Pefloxacin in spectrophotometric drug recognition studies which offers tremendous potential for analytical applications.

    CONCLUSIONS: Gold nanoparticles conjugation was shown to enhance the antibacterial efficacy of DMAP-PTA ligand, while DMAP-PTA-AuNPs also induced synergistic effects on the potency of Pefloxacin against E. coli. DMAP-PTA-AuNPs were also developed as Pefloxacin probes in recognizing the drug in blood and water samples in the presence of other drugs.

    Matched MeSH terms: Sulfhydryl Compounds/chemical synthesis*; Sulfhydryl Compounds/chemistry
  15. Fulltext Membrane Surface-Enhanced Raman Spectroscopy for Cholesterol-Modified Lipid Systems: Effect of Gold Nanoparticle Size
    Faried M, Suga K, Okamoto Y, Shameli K, Miyake M, Umakoshi H
    ACS Omega, 2019 Aug 27;4(9):13687-13695.
    PMID: 31497686 DOI: 10.1021/acsomega.9b01073
    A gold nanoparticle (AuNP) has a localized surface plasmon resonance peak depending on its size, which is often utilized for surface-enhanced Raman scattering (SERS). To obtain information on the cholesterol (Chol)-incorporated lipid membranes by SERS, AuNPs (5, 100 nm) were first functionalized by 1-octanethiol and then modified by lipids (AuNP@lipid). In membrane surface-enhanced Raman spectroscopy (MSERS), both signals from 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) and Chol molecules were enhanced, depending on preparation conditions (size of AuNPs and lipid/AuNP ratio). The enhancement factors (EFs) were calculated to estimate the efficiency of AuNPs on Raman enhancement. The size of AuNP100nm@lipid was 152.0 ± 12.8 nm, which showed an surface enhancement Raman spectrum with an EF2850 value of 111 ± 9. The size of AuNP5nm@lipid prepared with a lipid/AuNP ratio of 1.38 × 104 (lipid molecule/particle) was 275.3 ± 20.2 nm, which showed the highest enhancement with an EF2850 value of 131 ± 21. On the basis of fluorescent probe analyses, the membrane fluidity and polarity of AuNP@lipid were almost similar to DOPC/Chol liposome, indicating an intact membrane of DOPC/Chol after modification with AuNPs. Finally, the membrane properties of AuNP@lipid systems were also discussed on the basis of the obtained MSERS signals.
    Matched MeSH terms: Sulfhydryl Compounds
  16. Fulltext Characterisation and Evaluation of Trimesic Acid Derivatives as Disulphide Cross-Linked Polymers for Potential Colon Targeted Drug Delivery
    Mat Yusuf SNA, Ng YM, Ayub AD, Ngalim SH, Lim V
    Polymers (Basel), 2017 Jul 27;9(8).
    PMID: 30970988 DOI: 10.3390/polym9080311
    Discovery and use of biocompatible polymers offers great promise in the pharmaceutical field, particularly in drug delivery systems. Disulphide bonds, which commonly occur in peptides and proteins and have been used as drug-glutathione conjugates, are reductively cleaved in the colon. The intrinsic stability of a disulphide relative to thiol groups is determined by the redox potential of the environment. The objective of this study was to synthesise a trimesic acid-based disulphide cross-linked polymer that could potentially be used for targeted delivery to the colon. The monomer was synthesised by an amide coupling reaction between trimesic acid and (triphenylmethyl) thioethylamine using a two-step synthesis method. The s-trityl group was removed using a cocktail of trifluoroacetic acid and triethylsilane to expose the thiols in preparation for further polymerisation. The resulting polymers (P10, P15, P21, P25, and P51, generated using different molar ratios) were reduced after 1.5 h of reduction time. Scanning electron microscopy images of the polymers showed spherical, loose, or tight patterns depending on the molar ratio of polymerisation. These polymers also exhibited efficient dissolution under various gastrointestinal conditions. Of the five polymers tested, P10 and P15 appeared to be promising drug delivery vehicles for poorly soluble drugs, due to the hydrophobic nature of the polymers.
    Matched MeSH terms: Sulfhydryl Compounds
  17. Report - Synthesis of new antibacterial agents encompassing tosyl, piperidine, propanamide and 1,3,4-oxadiazole functionalities
    Sattar A, Aziz-Ur-Rehman -, Abbasi MA, Siddiqui SZ, Rasool S, Ali Shah SA
    Pak J Pharm Sci, 2020 Jul;33(4):1697-1705.
    PMID: 33583804
    A series of propanamide compounds 6a-l was derived by N-substitution reactions, encompassing tosyl, piperidine and 1,3,4-oxadiazole moieties. The intended array of compounds 6a-l was afforded by a series of five steps reaction scheme. 1-Tosylpiperidin-4-carboxylate (1) was synthesized by the reaction of tosyl chloride (a) with ethyl isonipecotate (b) under mild basic conditions. Compound 1 was subjected to nucleophillic substitution by hydrazine to synthesize 1-tosylpiperidin-4-carbohydrazide (2). The compound, 5-(1-tosylpiperidin-4-yl)-1,3,4-oxadiazole-2-thiol (3) was synthesized by intermolecular cyclization of compound 2 by CS2 under strong basic conditions. The target compounds, 6a-l, were finally synthesized from 3 by reacting with different electrophiles, 5a-l, in an aprotic polar solvent with sodium hydride as an activator. The different propanamoyl electrophiles, 5a-l, were synthesized by the reaction of different aromatic and aliphatic amines, 4a-l, with 3-bromopropionyl chloride under mild basic conditions. The structural elucidation was carried out using modern spectroscopic techniques including IR, 1H-NMR and EI-MS. The antibacterial potential of synthesized compounds was assessed against five bacterial strains. Compounds 6a, 6c, 6d, 6e and 6f were found to be potent antibacterial agents.
    Matched MeSH terms: Sulfhydryl Compounds
  18. Improved peroxide biosensor based on Horseradish Peroxidase/Carbon Nanotube on a thiol-modified gold electrode
    Kafi AKM, Naqshabandi M, Yusoff MM, Crossley MJ
    Enzyme Microb Technol, 2018 Jun;113:67-74.
    PMID: 29602389 DOI: 10.1016/j.enzmictec.2017.11.006
    A new 3-dimensional (3D) network of crosslinked Horseradish Peroxidase/Carbon Nanotube (HRP/CNT) on a thiol-modified Au surface has been described in order to build up the effective electrical wiring of the enzyme units with the electrode. The synthesized 3D HRP/CNT network has been characterized with cyclic voltammetry and amperometry which results the establishment of direct electron transfer between the redox active unit of HRP and the Au surface. Electrochemical measurements reveal that the high biological activity and stability is exhibited by the immobilized HRP and a quasi-reversible redox peak of the redox centre of HRP was observed at about -0.355 and -0.275V vs. Ag/AgCl. The electron transfer rate constant, KSand electron transfer co-efficient α were found as 0.57s-1and 0.42, respectively. Excellent electrocatalytic activity for the reduction of H2O2was exhibited by the developed biosensor. The proposed biosensor modified with HRP/CNT 3D network displays a broader linear range and a lower detection limit for H2O2determination. The linear range is from 1.0×10-7to 1.2×10-4M with a detection limit of 2.2.0×10-8M at 3σ. The Michaelies-Menten constant Kapp M value is estimated to be 0.19mM. Moreover, this biosensor exhibits very high sensitivity, good reproducibility and long-time stability.
    Matched MeSH terms: Sulfhydryl Compounds
  19. Fulltext MODIFIED SCREEN-PRINTED ELECTRODE FOR DETERMINATION OF IMIDACLOPRID IN WATER SAMPLES: A PRELIMINARY STUDY
    AZRILAWANI AHMAD, NUR ANIS ZAFIRAH ZAINORDIN, NUR AMIRA JAAFAR
    UMT Journal of Undergraduate Research, 2019;1(2):41-50.
    MyJurnal
    A preliminary assessment of a simple and rapid electrochemical method was carried out to analyse imidacloprid (IMI) in water samples using cyclic voltammetry (CV) based on modified screen-printed gold electrode (SPGE). Self-assembled monolayer (SAM) was optimized using 11-mercaptoundecanoic acid (11-MUA) with several parameters such as scan rates, type of supporting electrolyte, and pH of the supporting electrolyte. The modified SPGE showed high suppressed current against the potential due to the formation of a monolayer on the electrode surface. Surface morphology of the electrode was analysed using Scanning Electron Microscopy (SEM) confirming that 11-MUA was present on the modified SPGE. The water samples were collected from GM Peladang, Kuala Terengganu and two locations at Universiti Malaysia Terengganu. Method detection limit was expressed as limit of detection (LOD) and limit of quantification (LOQ) for modified SPGE which were calculated at 3.784 and 12.613 mg/L in water samples, respectively. This study showed that the reduction peak current observed on the modified electrode was lower compared with oxidation peak current. Hence, gold is unsuitable for IMI detection.
    Matched MeSH terms: Sulfhydryl Compounds
  20. Physical properties and stability evaluation of fish oil-in-water emulsions stabilized using thiol-modified β-lactoglobulin fibrils-chitosan complex
    Chang HW, Tan TB, Tan PY, Abas F, Lai OM, Wang Y, et al.
    Food Res Int, 2018 03;105:482-491.
    PMID: 29433239 DOI: 10.1016/j.foodres.2017.11.034
    Fish oil-in-water emulsions containing fish oil, thiol-modified β-lactoglobulin (β-LG) fibrils, chitosan and maltodextrin were fabricated using a high-energy method. The results showed that chitosan coating induced charge reversal; denoting successful biopolymers complexation. A significantly (p<0.05) larger droplet size and lower polydispersity index value, attributed to the thicker chitosan coating at the oil-water interface, were observed. At high chitosan concentrations, the cationic nature of chitosan strengthened the electrostatic repulsion between the droplets, thus conferring high oxidative stability and low turbidity loss rate to the emulsions. The apparent viscosity of emulsions stabilized using thiol-modified β-LG fibrils-chitosan complex was higher than those stabilized using β-LG fibrils alone, resulting in the former's higher creaming stability. Under thermal treatments (63°C and 100°C), emulsions stabilized using thiol-modified β-LG fibrils-chitosan complex possessed higher heat stability as indicated by the consistent droplet sizes observed. Chitosan provided a thicker protective layer that protected the oil droplets against high temperature. Bridging flocculation occurred at low chitosan concentration (0.1%, w/w), as revealed through microscopic observations which indicated the presence of large flocs. All in all, this work provided us with a better understanding of the application of protein fibrils-polysaccharide complex to produce stable emulsion.
    Matched MeSH terms: Sulfhydryl Compounds
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links