MyMedR

Displaying publications 1 - 20 of 33 in total

Abstract:

Sort:

Fulltext Phase Relations in the Na, K//Cl, SO4, CO3-H2O Quinary System at 35 °C

Tursunbadalov S, Sillanpää M

ACS Omega, 2021 Dec 28;6(51):35718-35726.
PMID: 34984302 DOI: 10.1021/acsomega.1c05620

The phase equilibria in the quinary Na, K//Cl, SO4, CO3-H2O system at 35 °C were determined, and a total phase equilibria diagram of the system was constructed by means of the translation method. Six points saturated with four solid phases, 19 curves saturated with three solid phases, and 21 fields saturated with two solid phases were determined in the system. Structures of dry-salt diagrams for the parts saturated with each of the nine solid phases were extracted from the total phase equilibria diagram of the system. The obtained results for the parts saturated with halite and sylvite agree well with the available literature data and verify the rest of the data obtained in this work.
Modelling and optimization of hexavalent chromium removal from aqueous solution by adsorption on low-cost agricultural waste biomass using response surface methodological approach

Rzig B, Guesmi F, Sillanpää M, Hamrouni B

Water Sci Technol, 2021 Aug;84(3):552-575.
PMID: 34388119 DOI: 10.2166/wst.2021.233

In this study, a response surface methodology (RSM) approach using central composite design (CCD) was investigated to develop a mathematical model and to optimize the effects of pH, adsorbent amount and temperature related to the hexavalent chromium removal by biosorption on peanut shells (PSh). The highest removal percentage of 30.28% was found by the predicted model under the optimum conditions (pH of 2.11, 0.73 g of PSh and 37.2 °C) for a 100 mg/L initial Cr(VI) concentration, which was very near to the experimental value (29.92%). The PSh was characterized by SEM, EDX, FTIR, BET, XRD analyses. Moreover, a Langmuir isotherm fitted well (R2 = 0.992) with the experimental data, and the maximum adsorption capacity was discovered to be 2.48 and 3.49 mg/g respectively at 25 and 45 °C. Kinetic data were well foreseen by pseudo second order. Thermodynamic study depicted that biosorption of Cr(VI) onto PSh was spontaneous and endothermic. Regeneration of the PSh using NaOH showed a loss <5% in the Cr(VI) removal efficiency up to three recycle runs. In summary, the Cr(VI) removal onto economic, sensitive and selective biosorbent (PSh) was optimized using CCD to study biosorption behaviors.
Fulltext Investigating the effectiveness of nanotechnologies in environmental health with an emphasis on environmental health journals

Aghalari Z, Dahms HU, Sillanpää M

Life Sci Soc Policy, 2021 Sep 13;17(1):8.
PMID: 34511108 DOI: 10.1186/s40504-021-00116-8

OBJECTIVE: The use of nanotechnologies is important to reduce environmental health problems in Iran, so the present study was conducted to determine the effectiveness of nanotechnologies in environmental health. This is a cross-sectional descriptive study for 11-year periods (2008-2018) on all articles published in three specialized journals of environmental health with emphasis on the use of nanotechnologies in various fields of environmental health (water, air, sewage, waste, food, radiation, etc).
RESULTS: In this study, 774 articles related to 114 issues of 3 specialized environmental health journals were reviewed. A review of 774 articles showed that 80 articles (10.3%) were published in the field of nanotechnologies. Out of 80 articles published in the field of nanotechnology, 66 articles (82.5%) were published on the subject of water, 9 articles (11.3%) on wastewater and 5 articles (6.2%) on air pollution. Subject review of articles showed that articles using carbon nanotubes to remove natural organic pollutants, surfactants, hydroxybenzenes, phenol, dimethyl phthalates, use of titanium dioxide nanoparticles, iron-magnesium nanoparticles for wastewater treatment, Silver nanoparticles were used to remove air pollution. The results showed that published articles on nanotechnology in the field of environmental health were few.
Waste-to-Resource: New application of modified mine silicate waste to remove Pb2+ ion and methylene blue dye, adsorption properties, mechanism of action and recycling

Ghaedi S, Seifpanahi-Shabani K, Sillanpää M

Chemosphere, 2022 Apr;292:133412.
PMID: 34974049 DOI: 10.1016/j.chemosphere.2021.133412

Currently, heavy metals and dyes are some of the most critical pollutants in the aquatic environment. So, in this paper "waste-to-resource conversion", as a new application of modified mine silicate waste to remove Pb2+ ion and methylene blue (MB) dye, adsorption properties, mechanism of action and recycling were studied. Silicate wastes are located in the alteration zone and the margin of molybdenum ore, these wastes are under the influence of hydrothermal solutions which are impregnated with iron and manganese ions. Hence, acid and base modifications have been commonly used. So, in this study, a highly porous nanostructure of modified silicate waste was used to remove MB and Pb2+ ion, in subsequent to our previous study on the application of the raw material of the same in the removal of malachite green. Acid, base, and acid/base treatments were used to activate and modify the adsorbent. Results show a significantly higher potential of modified adsorbent in the removal of MB and Pb2+ compared to the raw material. According to the isotherm and kinetic studies for MB and Pb2+ the Langmuir and Temkin and pseudo-second-order models were investigated with experimental data. Modified nanomaterial was used for several adsorption and desorption processes, without a significant decrease in the capability of the adsorbent in the removal of MB and Pb2+ pollutants. Leached iron and manganese ions (as production of modification) are deposited in the form of sludge using a simple pH adjustment and precipitation process and can be used to recover iron and manganese metals in the long run. The comparison of monolayer adsorption capacity using for Pb2+ ion and MB dye are as ((untreated SW: 29.41, 1.05); (NaOH treated: 21.74, 100); (Nitric Acid treated: 16.67, 142.86); (Citric Acid treated: 40, 125); (Nitric/Citric Acids treated: 15.63, 111.11) and (Nitric/Citric Acids/NaOH treated: 15.15, 83.33)), respectively. Higher adsorption capacity and re-generable properties of this adsorbent suggest the usage of this natural and abundant mine waste to treat wastewater containing toxic elements and dyes.
Photoelectrocatalytic mechanism of PEDOT modified filtration membrane

Shi L, Liu J, Gao B, Sillanpää M

Sci Total Environ, 2022 Mar 20;813:152397.
PMID: 34923007 DOI: 10.1016/j.scitotenv.2021.152397

The generation of free radicals is the key to the photocatalytic efficiency. In this study, the degradation mechanism of photoelectrocatalysis (PEC) membrane could be adequately explained by exploring the generation pathway of different free radicals. The PEC membrane was prepared by gas phase polymerization of poly (3, 4-ethylene dioxythiophene) (PEDOT) on non-woven fabric, industrial filter cloth, ceramic membrane and polyvinylidene fluoride (PVDF) membrane, respectively. Three-dimensional fluorescence test showed that the optimal degradation of mixed or monomer contamination (bovine serum protein, sodium humate, and sodium alginate) was achieved by modified ceramic membrane under PEC condition. As for self-cleaning experiment, the membrane resistance decreased 65.7% when the reaction conditions changed from dark to PEC for 30 min. Combined with the characterization results, PEDOT as photocapacitance extended electron lifetime and promoted free radical generation. This system was mainly dependent on superoxide free radicals (0.01 mmol/L) and singlet oxygen (0.10 mmol/L), which came from energy and electron transfer. Oxygen vacancy could adsorb oxygen to produce superoxide radicals, which was further oxidized to singlet oxygen. In addition, the π-electron conjugated system of PEDOT accelerated the hole transfer and the separation of electrons and holes. Also, this study provided a new view of reactive oxygen species generation mechanism from PEDOT modified membrane.
The activation of peroxymonosulfate by biochar derived from anaerobic and aerobic iron-containing excess sludge

Duan Y, Gao B, Liu J, Sillanpää M

Environ Sci Pollut Res Int, 2023 Mar 31.
PMID: 37000396 DOI: 10.1007/s11356-023-26622-0

The excess sludge from municipal sewage treatment plants is rich in Fe (III) due to chemical dephosphorization. The activation of peroxymonosulfate (PMS) by biochar derived from anaerobic and aerobic iron-containing excess sludge was studied systematically in this research. Fe (III)-containing excess sludge was cultured in an anaerobic environment for conversion of partial Fe (III) to Fe (II), which was further carbonized to prepare biochar labeled AnSx@Fe. Meanwhile, aerobic sludge with different Fe (III) content was directly carbonized to produce biochar labeled AeS@Fe. For biochar (AnS20@Fe-15%) prepared from 15% Fe(III)-containing anaerobic cultured 20 days sludge, the relative contents of Fe (III) and Fe (II) were 21.26% and 78.74%, which were 31.03% and 68.97% for biochar (AeS@Fe-10%) prepared from 10% Fe (III)-containing aerobic sludge. Fe (III) can be reduced to Fe (II) by both anaerobic culture and carbonization. Their removal rates of tetracycline (TC) through 60 min PMS activation were 97% and 98%, with TOC (Total organic carbon) removal of 61.8% and 53.4% respectively. The reactive species including sulfate radical [Formula: see text], hydroxyl radical (·OH) and singlet oxygen (1O2) were produced during PMS activation. After O2-aeration treatment of both AeS@Fe and AnSx@Fe, the relative content of Fe (II) was decreased and group C = O was disappeared, which resulted in reduction of [Formula: see text], ·OH and 1O2. The generation of [Formula: see text] and ·OH was dominated by the Fe (II) activation and the 1O2 generation was originated from graphite type N and C = O. Direct carbonization of aerobic and anaerobic sludge is a feasible method to produce biochar for PMS activation.
Removal of phosphate with a polyacrylonitrile composite functionalized by a metal organic framework-enhanced layered double hydroxide

Song J, Cha L, Sillanpää M, Sainio T

Water Sci Technol, 2023 Apr;87(7):1672-1685.
PMID: 37051790 DOI: 10.2166/wst.2023.083

Excessive phosphorus causes eutrophication problems. The adsorptive removal of phosphate is prevalent and practical in large-scale applications, such as column adsorption. A metal organic framework (MOF)-enhanced layered double hydroxide (LDH) adsorbent material was developed and studied for batch adsorption and then combined with polyacrylonitrile (PAN) to form MOF/LDH/PAN composite beads working as a functional material for columns. Scanning electron microscopy (SEM) images showed the well-dispersed adsorbent powder in porous composite beads. The Fowler-Guggenheim isotherm model described the phosphate adsorption behavior of the MOF/LDH powder with a maximum capacity of 74.96 mg P/g. Mass transfer in the composite beads was successfully described with the Fickian diffusion model. The composite-packed fixed bed treated 37.95 BVs of the influent (55.51 mg P/L phosphate solution) and achieved an uptake of 18.92 mg P/g, with a removal efficiency of 96.42%, before the breakthrough point in the column study. The phosphate-loaded composite bed was regenerated with 0.1 M NaOH to 70% efficiency within 30 BVs. The polymer composite can be considered a practical solution for adsorption-based water treatment applications in tank and column processes where powder adsorbents cannot be applied.
Fulltext A critical review on diverse technologies for advanced wastewater treatment during SARS-CoV-2 pandemic: What do we know?

Zahmatkesh S, Amesho KTT, Sillanpää M

J Hazard Mater Adv, 2022 Aug;7:100121.
PMID: 37520795 DOI: 10.1016/j.hazadv.2022.100121

Advanced wastewater treatment technologies are effective methods and currently attract growing attention, especially in arid and semi-arid areas, for reusing water, reducing water pollution, and explicitly declining, inactivating, or removing SARS-CoV-2. Overall, removing organic matter and micropollutants prior to wastewater reuse is critical, considering that water reclamation can help provide a crop irrigation system and domestic purified water. Advanced wastewater treatment processes are highly recommended for contaminants such as monovalent ions from an abiotic source and SARS-CoV-2 from an abiotic source. This work introduces the fundamental knowledge of various methods in advanced water treatment, including membranes, filtration, Ultraviolet (UV) irradiation, ozonation, chlorination, advanced oxidation processes, activated carbon (AC), and algae. Following that, an analysis of each process for organic matter removal and mitigation or prevention of SARS-CoV-2 contamination is discussed. Next, a comprehensive overview of recent advances and breakthroughs is provided for each technology. Finally, the advantages and disadvantages of each method are discussed.
Fulltext Evaluation of nutrients in bread: a systematic review

Aghalari Z, Dahms HU, Sillanpää M

J Health Popul Nutr, 2022 Nov 14;41(1):50.
PMID: 36376938 DOI: 10.1186/s41043-022-00329-3

BACKGROUND: A balanced and optimized amount of nutrients in bread, which is the main food in many countries, is necessary to maintain human health. Considering the importance of nutritional values of bread in the food basket of Iranian households, the purpose of this study was to determine the nutrients and their concentrations in breads consumed in Iran.
METHODS: This systematic review study was performed to determine the types of nutrients in breads consumed in Iran by searching reputable international databases including Scopus and Google scholar, PubMed, Science direct, ISI (Web of Science). Data were collected according to inclusion and exclusion criteria and by searching for relevant keywords, emphasizing the types of nutrients in breads consumed in Iran. Qualitative data were collected using the standard PRISMA checklist (preferential reporting items for systematic reviews and meta-analysis). After verifying the quality of the articles, the information was entered into a checklist such as the name of the first author and year of publication of the research, type of study, number of samples, type of nutrition, type of bread and amount of nutrition measured.
RESULTS: After reviewing the information and quality of articles, 10 articles were qualified for systematic review. The review of the articles showed that different breads were experimented, including: Sangak, Barbari, Taftoon, Lavash, French and local bread. The highest number of experimented bread samples was Sangak. Examination of the articles showed that 6 nutrients were experimented in different breads such as Fe, K, Mg, Ca, Cu and Zn. The highest number of experimented in breads was related to the amount of Zn (13 times) and Cu (10 times), respectively. The results of quality assessment of articles showed that most of the studies were of good quality. The results of articles on the amount of nutrients measured in different breads showed that only in two articles the amount of nutrients was reported to be desirable. In most articles, the amount of nutrients in breads was reported to be lower or higher than standard.
CONCLUSION: The results of this study showed that the concentration of nutrients in most articles was undesirable. It is suggested that optimal methods of enrichment of breads and flours be done with interdisciplinary cooperation between food hygiene, environmental health, nutrition, farmers and bakers. It is recommended that food hygiene and environmental health researchers investigate other nutrients (including phosphorus, selenium, manganese, boron and molybdenum) in breads and other staple foods used by people to constructive and practical measures to increase public health.
Food hygiene research: a bibliometric comparison in Iranian and international "Environmental Health" journals

Aghalari Z, Dahms HU, Sillanpää M

J Health Popul Nutr, 2023 Jan 06;42(1):1.
PMID: 36609393 DOI: 10.1186/s41043-022-00339-1

BACKGROUND: Food hygiene is one of the specialized fields of environmental health, and despite the problems associated with foodborne illnesses, there is no evaluation available that would focus on specialized environmental health journals. The purpose of the present survey is a comparison of the status of food hygiene articles published in Iranian and international journals of environmental health.
METHODS: This cross-sectional descriptive study was performed on all published articles in five Iranian environmental health journals and three international environmental health journals that are among the top 5% and 10% based on SNIP, emphasizing the issue of food. Our data were collected by searching relevant keywords in the articles published during the years (2008-2021), with emphasis on food hygiene. In the checklist, journal and articles information was collected by year of publication, a number of articles, information on authors' participation status in terms of number, gender, organizational affiliation, country and continents, and research centers according to authors' authorship. Statistical analysis of data was performed using descriptive and inferential statistical indices. VOSviewer software was also used to visualize the data.
RESULTS: In Iranian environmental health journals, out of 2305 articles (7.3%) and out of 6898 articles in international environmental health journals (2.4%) dealt with food hygiene. Food hygiene articles were divided into seven categories, with the largest number of articles on aquatic and agricultural products each with a frequency of 48 articles. Articles related to heavy metals in food were provided by 30.81%. In this study, out of 150 articles, 15 articles were written with the participation of 30 authors from seven continents (Asia, America, and Europe), most of which were from Asia and India. In international environmental health journals, among the main research topics in articles related to food hygiene, the highest number (52.5%) was related to a determination about pollution such as heavy metal concentrations in food.
CONCLUSIONS: Articles published in Iranian and international environmental health journals about food hygiene were limited. According to the increasing prevalence of foodborne illnesses, especially in recent decades, and the importance of paying attention to food hygiene, more targeted studies are needed.
Current progress in waste tire rubber devulcanization

Saputra R, Walvekar R, Khalid M, Mubarak NM, Sillanpää M

Chemosphere, 2021 Feb;265:129033.
PMID: 33250228 DOI: 10.1016/j.chemosphere.2020.129033

Vulcanized rubber, due to its superior mechanical properties, has long been used in various industries, especially automotive. The rubber industry has evolved and expanded over the years to meet the increasing global demands for tires. Today tires consist of about 19% natural rubber and 24% synthetic rubber, while plastic polymer and metal, filler and additives make up the rest. Over 1.6 billion new tires are produced annually and around 1 billion waste tires are generated. Tires are extensively designed with several complex processes to make them virtually indestructible. Since tire rubber does not decompose easily, their disposal at the end of service life creates a monumental environmental impact. However, waste tire rubber (WTR) consist of valuable rubber hydrocarbon, making its recovery or regeneration highly desirable. The conventional recovery method of WTR tends to produce undesirable products due to the destruction of the polymeric chain and exponentially degenerates the vulcanizates' physical properties. Since then, multiple devulcanization processes were introduced to effectively and selectively cleave vulcanizate's crosslinks while retaining the polymeric networks. Different devulcanization methods such as chemical, mechanical, irradiation, biological and their combinations that have been explored until now are reviewed here. Besides, an overview of the latest development of devulcanization by ionic liquids and deep eutectic solvents are also described. While such devulcanization technique provides new sustainability pathway(s) for WTR, the generated devulcanizate also possesses comparable physical properties to that of virgin products. This further opens the possibility of novel circular economic opportunities worldwide.
Fulltext Enhancement of nitrification efficiency during sludge bulking by magnetic field under long sludge retention time

Zaidi NS, Muda K, Sohaili J, Loan LW, Sillanpää M

3 Biotech, 2020 Sep;10(9):408.
PMID: 32904368 DOI: 10.1007/s13205-020-02398-9

The aim of the present study is to investigate the potential of magnetic field application as an alternative approach for controlling sludge bulking due to long sludge retention time (SRT) while enhancing nitrification efficiency upon the occurrence. Two sequencing batch reactors, reactor A (SBRA, magnetic field intensity 88.0 mT) and reactor B (SBRB, control) were operated under long SRT to induce the growth of filamentous microorganisms. The effect of magnetic field on nitrification, viz. ammonia-nitrogen (NH4-N) and nitrite removal, as well as biomass properties were studied under the sludge bulking condition. Results indicated that nitrification efficiency of SBRA was consistently higher with 90% NH4-N removal and 74-81% nitrite removal, which could be credited to the enhanced biomass properties of activated sludge due to the induced magnetic field. Metabolism activity and biodegradability of aerobic bacteria were also enhanced through the application of magnetic field, even under long SRT condition. This was evidenced by the average oxygen uptake rate (OUR) in SBRA that was higher with 11.7 ± 1.2 mg/L·h compared to SBRB with 9.5 ± 0.4 mg/L·h. Occurrence of filamentous sludge bulking was likewise minimized.
Fulltext Dynamics of microbial community and their effects on membrane fouling in an anoxic-oxic gravity-driven membrane bioreactor under varying solid retention time: A pilot-scale study

Deb A, Gurung K, Rumky J, Sillanpää M, Mänttäri M, Kallioinen M

Sci Total Environ, 2022 Feb 10;807(Pt 2):150878.
PMID: 34627895 DOI: 10.1016/j.scitotenv.2021.150878

Membrane fouling in a membrane bioreactor (MBR) is highly influenced by the characteristics of the influent, the mixed liquor microbial community and the operational parameters, all of which are environment specific. Therefore, we studied the dynamics of microbial community during the treatment of real municipal wastewater in a pilotscale anoxic-oxic (A/O) MBR equipped with a gravity-driven membrane filtration system. The MBR was operated at three different solid retention times (SRTs): 25, 40 and 10 days for a total period of 180 days in Nordic environmental conditions. Analysis of microbial community dynamics revealed a high diversity of microbial species at SRT of 40 days, whereas SRT of 25 days was superior with microbial richness. Production of soluble microbial products (SMP) and extracellular polymeric substances (EPS) was found to be intensely connected with the SRT and food to microorganism (F/M) ratio. Relatively longer operational period with the lowest rate of membrane fouling was observed at SRT of 25 days, which was resulted from the superior microbial community, lowest production of SMP and loosely bound EPS as well as the lower filtration resistance of larger sludge flocs. Abundance of quorum quenching (QQ) bacteria and granular floc forming bacterial genera at SRT of 25 days provided relatively lower membrane fouling tendency and larger floc formation, respectively. On the other hand, substantial amount of various surface colonizing and EPS producing bacteria was found at SRT of 10 days, which promoted more rapid membrane fouling compared with the fouling rate seen at other tested SRTs. To sum up, this research provides a realistic insight into the impact of SRT on microbial community dynamics and resulting characteristics of mixed liquor, floc size distribution and membrane fouling for improved MBR operation.
Homogeneous Electrochemiluminescence in the Sensors Game: What Have We Learned from Past Experiments?

Nasrollahpour H, Khalilzadeh B, Naseri A, Sillanpää M, Chia CH

Anal Chem, 2022 Jan 11;94(1):349-365.
PMID: 34878242 DOI: 10.1021/acs.analchem.1c03909
A novel Sm doped Cr2O3 sesquioxide-decorated MWCNTs heterostructured Fenton-like with sonophotocatalytic activities under visible light irradiation

Eshaq G, M A, Khan MA, Alothman ZA, Sillanpää M

J Hazard Mater, 2022 03 15;426:127812.
PMID: 34844808 DOI: 10.1016/j.jhazmat.2021.127812

Novel Sm doped Cr2O3 decorated MWCNTs nanocomposite photocatalyst was successfully prepared by a facile hydrothermal method for metoprolol (MET) degradation. A heterogeneous photo -Fenton like system was formed with the addition of H2O2 for ultrasonic irradiation (US), visible light irradiation (Vis) and dual irradiation (US/Vis) systems. The intrinsic characteristics of Sm doped Cr2O3 decorated MWCNTs nanocomposite was comprehensively performed using state-of-art characterization tools. Optical studies confirmed that Sm doping shifted the absorbance of Cr2O3 towards the visible-light region, further enhanced by MWCNTs incorporation. In this study, degradation of metoprolol (MET) was investigated in the presence of Cr2O3 nanoparticles, Sm doped Cr2O3 and Sm doped Cr2O3 decorated MWCNTs nanocomposites using sonocatalysis and photocatalysis and simultaneously. Several different experimental parameters, including irradiation time, H2O2 concentration, catalyst amount, initial concentration, and pH value, were optimized. The remarkably enhanced sonophotocatalytic activity of Sm doped Cr2O3 decorated MWCNTs could be attributed to the more formation of reactive radicals and the excellent electronical property of Sm doping and MWCNTs. The rate constant of degradation using sonophotocatalytic system was even higher than the sum of rates of individual systems due to its synergistic performance based on the kinetic data. A plausible mechanism for the degradation of MET over Sm-Cr2O3/MWCNTs is also demonstrated by using active species scavenger studies and EPR spectroscopy. Our findings imply that (•OH), (h+) and (•O2-) were the reactive species responsible for the degradation of MET based on the special three-way Fenton-like mechanism and the dissociation of H2O2. The durability and stability of the nanocomposite were also performed, and the obtained results revealed that the catalysts can endure the harsh sonophotocatalytic conditions even after fifth cycles. Mineralization experiments using the optimized parameters were evaluated as well. The kinetics and the reaction mechanism with the possible reasons for the synergistic effect were presented. Identification of degraded intermediates also investigated.
Fulltext Orange peels magnetic activate carbon (MG-OPAC) composite formation for toxic chromium absorption from wastewater

Khalil A, Salem M, Ragab S, Sillanpää M, El Nemr A

Sci Rep, 2023 Feb 28;13(1):3402.
PMID: 36854794 DOI: 10.1038/s41598-023-30161-6

This work prepared a composite of orange peels magnetic activated carbon (MG-OPAC). The prepared composite was categorized by X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), Brunauer-Emmett-Teller (BET), Energy-dispersive X-ray spectroscopy (EDX), Scanning Electron Microscopy (SEM) and vibrating-sample magnetometer (VSM) analyses. The MG-OPAC composite showed the surface area (155.09 m2/g), the total volume of pores (0.1768 cm3/g), and the mean diameter of pores (4.5604 nm). The saturation magnetization (Ms = 17.283 emu/g), remanence (Mr = 0.28999 emu/g) and coercivity (Hc = 13.714 G) were reported for the prepared MG-OPAC. Likewise, at room temperature, the MG-OPAC was in a super-paramagnetic state, which could be collected within 5 S (
Adsorption isotherm models: A comprehensive and systematic review (2010-2020)

Mozaffari Majd M, Kordzadeh-Kermani V, Ghalandari V, Askari A, Sillanpää M

Sci Total Environ, 2022 Mar 15;812:151334.
PMID: 34748826 DOI: 10.1016/j.scitotenv.2021.151334

Among numerous methods developed in purification and separation industries, the adsorption process has received considerable attention due to its inexpensive, facile, and eco-friendly nature. The importance of the adsorption process causes extraordinary endeavors for modeling the adsorption isotherms during the years; thus, myriads of research have been conducted and many reviews have been published. In this paper, we have attempted to gather the most widely used adsorption isotherms and their related definitions, along with examples of correlated work of the recent decade. In the present review, 37 adsorption isotherms with about 400 references have been collected from the research published in the period of 2010-2020. The adsorption isotherms utilized are alphabetically organized for ease of access. The parameters of each isotherm, as well as the applicable definitions, are presented in the table, in addition to being discussed in the text. Another table is provided for the practical use of researchers, featuring the usage of the related isotherms in peer-reviewed studies.
Colloidal gas aphrons for biotechnology applications: a mini review

Pal P, Hasan SW, Abu Haija M, Sillanpää M, Banat F

Crit Rev Biotechnol, 2023 Dec;43(7):971-981.
PMID: 35968911 DOI: 10.1080/07388551.2022.2092716

Colloidal gas aphrons (CGAs) are highly stable, spherical, micrometer-sized bubbles encapsulated by surfactant multilayers. They have several intriguing properties, including: high stability, large interfacial area, and the ability to maintain the same charge as their parent molecules. The physical properties of CGAs make them ideal for biotechnological applications such as the recovery of a variety of: biomolecules, particularly proteins, yeast, enzymes, and microalgae. In this review, the bio-application of CGAs for the recovery of natural components is presented, as well as: experimental results, technical challenges, and critical research directions for the future. Experimental results from the literature showed that the recovery of biomolecules was mainly determined by electrostatic or hydrophobic interactions between polyphenols and proteins (lysozyme, β-casein, β-lactoglobulin, etc.), yeast, biological molecules (gallic acid and norbixin), and microalgae with CGAs. Knowledge transfer is essential for commercializing CGA-based bio-product recovery, which will be recognized as a viable technology in the future.
Fulltext Microplastics in mangroves and coral reef ecosystems: a review

John J, Nandhini AR, Velayudhaperumal Chellam P, Sillanpää M

Environ Chem Lett, 2022;20(1):397-416.
PMID: 34642583 DOI: 10.1007/s10311-021-01326-4

Microplastic pollution has recently been identified as a major issue for the health of ecosystems. Microplastics have typically sizes of less than 5 mm and occur in various forms, such as pellets, fibres, fragments, films, and granules. Mangroves and coral reefs are sensitive and restricted ecosystems that provide free ecological services such as coastal protection, maintaining natural cycles, hotspots of biodiversity and economically valuable goods. However, urbanization and industrial activities have started contaminating even these preserved ecosystems. Here we review sources, occurrence, and toxicity of microplastics in the trophic levels of mangrove and coral reef ecosystems. We present detection methods, such as microscopic identification and spectroscopy. We discuss mitigating measures that prevent the entry of microplastics into the marine environment.
Fulltext Single crystal X-ray structural dataset of 1,2,4-dithiazolium tetrafluoroborate

Prakasam BA, Kumar CU, Lahtinen M, Peuronen A, Sillanpää M

Data Brief, 2022 Apr;41:107924.
PMID: 35242910 DOI: 10.1016/j.dib.2022.107924

Herein, we present the crystallographic dataset of 1,2,4-dithiazolium tetrafluoroborate. Single crystal X-ray structural analysis evidences that the 1,2,4-dithiazolium ring is almost planar. The 1,2,4-dithiazolium and tetrafluoroborate ions contribute in hydrogen bonding wherein the N-H·N hydrogen bonding in 1,2,4-dithiazolium dimer forms an eight-membered pseudo ring with the R 2 2 ( 8 ) Etter's graph set. The information provided in this data contributes to the understanding of structural chemistry and hydrogen bonding interactions in dithiazole derivatives.

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links